{"meta":{"query_hash":"bf32c9a3a405","filters":{"topic":"Injection Molding Process and Properties"},"cohort_total":227,"direct_labels_cover":1,"predictions_cover":227,"exported":227,"export_cap":100000,"truncated":false,"label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"permalink":"https://metacan.xera.ac/q/bf32c9a3a405","api":"https://metacan.xera.ac/api/v1/cohort?topic=Injection+Molding+Process+and+Properties"},"results":[{"id":"W134995871","doi":"10.1007/s10853-015-8853-z","title":"Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy","year":2015,"lang":"en","type":"article","venue":"Journal of Materials Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"","keywords":"Materials science; Rheology; Rheometry; Differential scanning calorimetry; Thixotropy; Shear thinning; Composite material; Viscosity; Wax; Mixing (physics); Extrusion; Molding (decorative); Shear rate; Transesterification; Paraffin wax; Organic chemistry; Methanol; Thermodynamics","score_opus":0.024179984615621004,"score_gpt":0.2656318054131379,"score_spread":0.2414518207975169,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W134995871","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99874,0.0004040592,0.00021171893,0.000015222653,0.000013744366,0.0000036537676,0.000052670508,0.00003063116,0.00052822597],"genre_scores_gemma":[0.9990728,0.00015152693,0.00017740604,0.0000070693036,0.0000034765696,0.0000024822996,0.000054650398,0.000027907849,0.00050268037],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9995734,0.000041066047,0.000033091655,0.00006175164,0.0001824391,0.000108263055],"domain_scores_gemma":[0.9992762,0.00022874484,0.00020008719,0.00004499127,0.00016621732,0.00008377283],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002912634,0.000336339,0.00039517073,0.000348019,0.0003298862,0.00064873794,0.00037189297,0.00031764837,0.0021502583],"category_scores_gemma":[0.0011467874,0.0002666573,0.0002660816,0.00033098692,0.00030544473,0.0007193098,0.00025023828,0.00037053425,0.0003498099],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.001759605,0.00009924864,0.0011945344,0.000095625786,0.00001880636,0.00017908303,0.0001014903,0.0006215069,0.9911718,0.00008429044,0.00006452937,0.004609552],"study_design_scores_gemma":[0.000016286462,0.00048192943,0.003985084,0.000009451048,0.00004186682,0.000038384544,0.00006373015,0.0016323541,0.99329984,0.000011214068,0.00041013354,0.000009575467],"about_ca_topic_score_codex":0.001752431,"about_ca_topic_score_gemma":0.0026432376,"teacher_disagreement_score":0.0021502583,"about_ca_system_score_codex":0.00042464148,"about_ca_system_score_gemma":0.0004213202,"threshold_uncertainty_score":0.0071933866},"labels":[],"label_agreement":null},{"id":"W1492572234","doi":"10.5772/12991","title":"Three-Dimensional Numerical Simulation of Injection Moulding","year":2010,"lang":"en","type":"book-chapter","venue":"InTech eBooks","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Injection moulding; Materials science; Computer science; Composite material","score_opus":0.023354648928283643,"score_gpt":0.23486749668947987,"score_spread":0.21151284776119622,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1492572234","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.39334503,0.0026226244,0.39792654,0.0014458948,0.0008760279,0.00038233542,0.0034002212,0.005389339,0.19461195],"genre_scores_gemma":[0.9169791,0.000722654,0.060692854,0.00017501623,0.000048111575,0.00024639454,0.0011144291,0.00060389447,0.019417578],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99973685,0.000032936452,0.000010860068,0.000023691358,0.00014972714,0.000046036086],"domain_scores_gemma":[0.99942136,0.00032437683,0.00004322637,0.00006614129,0.00009681033,0.00004805814],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026752386,0.00055438874,0.0010565887,0.00045008125,0.00067521865,0.001412713,0.001342521,0.0017320854,0.009017731],"category_scores_gemma":[0.0012589697,0.0006417539,0.00079839624,0.0006741552,0.0008392588,0.00080878614,0.0006398982,0.00085556967,0.0010807568],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000051288756,0.000054892043,0.00038280737,0.00007167525,0.00001444613,0.0000751057,0.000044858614,0.98358846,0.0035387166,0.0059122667,0.0010354316,0.005230039],"study_design_scores_gemma":[0.000011321108,0.000010323992,0.0001719076,0.0000061046476,0.0000024557974,0.000014828797,0.000006137729,0.99708986,0.0010468327,0.0007434278,0.00089004746,0.0000067593555],"about_ca_topic_score_codex":0.0065628313,"about_ca_topic_score_gemma":0.004030586,"teacher_disagreement_score":0.009017731,"about_ca_system_score_codex":0.0009809466,"about_ca_system_score_gemma":0.0010628813,"threshold_uncertainty_score":0.030167341},"labels":[],"label_agreement":null},{"id":"W1493814847","doi":"10.4271/2001-01-0399","title":"Green Machining Of P/M Parts Using Enhanced Green Strength Lubricating Systems","year":2001,"lang":"en","type":"article","venue":"SAE technical papers on CD-ROM/SAE technical paper series","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Fédération des Comités de Parents du Québec","funders":"","keywords":"Machining; Lubrication; Materials science; Sintering; Wax; Compaction; Composite material; Lubricant; Metallurgy","score_opus":0.020515954685893577,"score_gpt":0.24388510329053556,"score_spread":0.223369148604642,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1493814847","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99061465,0.00035087156,0.0070273965,0.000013188783,0.00000808949,0.000015244305,0.000035461515,0.00008618025,0.0018488354],"genre_scores_gemma":[0.9852534,0.00021249447,0.012287399,0.00001488976,0.0000036463287,0.000008581799,0.000069668764,0.000044453842,0.0021053932],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997595,0.000023908382,0.000016369942,0.00003519171,0.00013278643,0.00003229773],"domain_scores_gemma":[0.9998418,0.00003343577,0.00005637254,0.000027276728,0.000028308858,0.000012664767],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002401597,0.00024161628,0.00019659723,0.00042899247,0.000114932605,0.00022675021,0.00026694883,0.00016039296,0.0012918764],"category_scores_gemma":[0.00033717966,0.00017295769,0.00018692901,0.00031489396,0.00032440864,0.00033481792,0.00031062856,0.00020670629,0.0002968563],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008115006,0.000012663571,0.00051727635,0.000057455945,0.00000498416,0.00007781896,0.00005839192,0.00037775538,0.9898948,0.00011559694,0.00004785973,0.008754204],"study_design_scores_gemma":[0.0000067319856,0.00024401364,0.0041748676,0.000005034793,0.000009067157,0.00010288324,0.000026966156,0.0012471541,0.9927362,0.000024908551,0.0014172934,0.000004819142],"about_ca_topic_score_codex":0.00035089976,"about_ca_topic_score_gemma":0.0011619421,"teacher_disagreement_score":0.0012918764,"about_ca_system_score_codex":0.00019926461,"about_ca_system_score_gemma":0.00014844333,"threshold_uncertainty_score":0.004321754},"labels":[],"label_agreement":null},{"id":"W1560581193","doi":"10.1002/pat.3322","title":"Microinjection molding of polyamide 6","year":2014,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Ryerson University; Universidade de Aveiro","keywords":"Microinjection; Polyamide; Materials science; Differential scanning calorimetry; Crystallinity; Extrusion; Molding (decorative); Composite material; Polarized light microscopy; Microstructure; Polymer; Optical microscope; Scanning electron microscope; Optics","score_opus":0.005965166597042711,"score_gpt":0.2022072745760156,"score_spread":0.19624210797897287,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1560581193","genre_codex":"empirical","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96412736,0.00043615574,0.030517368,0.000029846167,0.00006405821,0.00009703748,0.00023134032,0.00047309545,0.004023782],"genre_scores_gemma":[0.9676012,0.0003501781,0.028441254,0.000019945097,0.000017975966,0.00006263839,0.0002626144,0.000102856095,0.0031412356],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998603,0.0000064237174,0.000009582838,0.00004719087,0.00005407149,0.000022428696],"domain_scores_gemma":[0.99982494,0.000028918817,0.000093860726,0.000024442992,0.000017081478,0.000010841413],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001246737,0.00029688745,0.0001543519,0.00027076632,0.00011284299,0.00018965591,0.00016286106,0.00014070104,0.0014599611],"category_scores_gemma":[0.00017652771,0.0001804296,0.00023813812,0.00015139088,0.00017794981,0.00018970692,0.00017210963,0.00041143864,0.0002836039],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000015094091,0.000006352902,0.00008896309,0.000021168426,0.0000013440111,0.000032999258,0.000014789714,0.00009720208,0.9970534,0.00007578803,0.000015629053,0.0025773102],"study_design_scores_gemma":[0.0000018837876,0.00006987746,0.0010997718,0.0000030837582,0.000002408342,0.000059202008,0.0000041695284,0.00038353534,0.9973477,0.00001274296,0.0010136159,0.0000019710828],"about_ca_topic_score_codex":0.00014532835,"about_ca_topic_score_gemma":0.0002958798,"teacher_disagreement_score":0.0014599611,"about_ca_system_score_codex":0.0001291297,"about_ca_system_score_gemma":0.00009247279,"threshold_uncertainty_score":0.004884064},"labels":[],"label_agreement":null},{"id":"W1621037735","doi":"10.1063/1.1766516","title":"Experimental And Numerical Study Of The Melt Behavior During The Injection Molding Process","year":2004,"lang":"en","type":"article","venue":"AIP conference proceedings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Sprue; Nozzle; Materials science; Pressure drop; Shear stress; Mechanics; Mold; Finite element method; Shear (geology); Molding (decorative); Isothermal process; Stress (linguistics); Composite material; Structural engineering; Mechanical engineering; Engineering; Thermodynamics","score_opus":0.017348623071054732,"score_gpt":0.24472385984175712,"score_spread":0.2273752367707024,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1621037735","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9681683,0.00044831343,0.026660064,0.000065623455,0.000037323785,0.00004102822,0.0002705996,0.00036373019,0.0039451323],"genre_scores_gemma":[0.98805875,0.00014302308,0.0109423315,0.0000068340732,0.000008429205,0.000032766875,0.00011910864,0.000027283135,0.0006613636],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99976844,0.000021745245,0.000012662207,0.00004376587,0.000119768236,0.000033631775],"domain_scores_gemma":[0.9992685,0.00035874388,0.000104577004,0.00011844512,0.00012461013,0.000025191786],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004541319,0.00029993302,0.000385439,0.0002652103,0.00036926035,0.00024285376,0.00039259435,0.0004843636,0.0018222878],"category_scores_gemma":[0.0011935409,0.00018695966,0.00020808756,0.0003214292,0.0005566677,0.0003608263,0.00021025464,0.00045120457,0.00017576637],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00036772678,0.000275756,0.004032492,0.00033558338,0.000019587727,0.0001742113,0.00041162595,0.056248907,0.91335374,0.0020270816,0.0002591899,0.022494094],"study_design_scores_gemma":[0.000029750381,0.000534368,0.006565719,0.000018052746,0.000017719012,0.00011038049,0.00006845907,0.21902719,0.77134115,0.0002527119,0.002002472,0.000031896627],"about_ca_topic_score_codex":0.000792904,"about_ca_topic_score_gemma":0.00059013674,"teacher_disagreement_score":0.0018222878,"about_ca_system_score_codex":0.00031511916,"about_ca_system_score_gemma":0.00018026125,"threshold_uncertainty_score":0.0060961843},"labels":[],"label_agreement":null},{"id":"W1670297032","doi":"10.1063/1.2740830","title":"Numerical Simulation of the Flow Behavior and Breakthrough Phenomenon in Co-Injection Molding","year":2007,"lang":"en","type":"article","venue":"AIP conference proceedings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Mechanics; Flow (mathematics); Molding (decorative); Core (optical fiber); Materials science; Isothermal flow; Isothermal process; Newtonian fluid; Viscosity; Momentum (technical analysis); Finite element method; Mechanical engineering; Thermodynamics; Open-channel flow; Composite material; Engineering; Physics","score_opus":0.022080230246842216,"score_gpt":0.2570603253168335,"score_spread":0.23498009506999126,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1670297032","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.93448186,0.0001403179,0.055654448,0.0001367104,0.000042351312,0.00008855834,0.00027763637,0.00056100247,0.008617174],"genre_scores_gemma":[0.9812004,0.00005329943,0.017011147,0.0000131772695,0.0000030207616,0.00007013231,0.000101316386,0.000024403724,0.001523025],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99989223,0.000014732045,0.0000050030226,0.00001596902,0.000039336213,0.00003271541],"domain_scores_gemma":[0.9995815,0.00022367417,0.000056543548,0.00003447079,0.000059527873,0.000044127133],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026322753,0.0003345218,0.00046591804,0.0003642312,0.0004001565,0.0004275581,0.00051339687,0.00075934094,0.0014017513],"category_scores_gemma":[0.00077274104,0.00023119213,0.0002928405,0.00038782592,0.000536687,0.0003094958,0.00028009264,0.00039039447,0.00012912737],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013123093,0.00010726059,0.0014797657,0.000040991526,0.000009431036,0.00012259933,0.00009010617,0.9702617,0.020989371,0.0020979114,0.00020774297,0.0044618924],"study_design_scores_gemma":[0.000007481431,0.000020930269,0.00019277005,0.0000015390382,0.0000012791714,0.000006409499,0.0000044256276,0.9968064,0.0027459033,0.00008826995,0.000122102,0.0000025604138],"about_ca_topic_score_codex":0.005536837,"about_ca_topic_score_gemma":0.0026748842,"teacher_disagreement_score":0.005536837,"about_ca_system_score_codex":0.00069750776,"about_ca_system_score_gemma":0.0007496189,"threshold_uncertainty_score":0.011009216},"labels":[],"label_agreement":null},{"id":"W1680045561","doi":"10.1063/1.1766839","title":"Three-Dimensional Simulation And Design Sensitivity Analysis Of The Injection Molding Process","year":2004,"lang":"en","type":"article","venue":"AIP conference proceedings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Sensitivity (control systems); Isothermal process; Finite element method; Materials science; Molding (decorative); Process (computing); Mold; Mechanical engineering; Computer science; Composite material; Thermodynamics; Structural engineering; Engineering","score_opus":0.031641173825710286,"score_gpt":0.2462180264188692,"score_spread":0.2145768525931589,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1680045561","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.5057987,0.0003787879,0.4606419,0.0005873001,0.00010340869,0.00020963968,0.000770206,0.0011696265,0.030340437],"genre_scores_gemma":[0.9722606,0.00011716799,0.024668932,0.000044006476,0.000007651169,0.00012100645,0.00015125274,0.0000594595,0.0025699541],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999689,0.00010603915,0.00001311729,0.00003155275,0.00011437216,0.000045899786],"domain_scores_gemma":[0.998587,0.0010405176,0.00008832236,0.00008302517,0.00017018964,0.00003096937],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007542285,0.00053046277,0.0004767044,0.00059197063,0.00037805614,0.0006888782,0.0003955552,0.0010386701,0.002621457],"category_scores_gemma":[0.0019120459,0.00044322628,0.000740561,0.00036559472,0.0006434237,0.0003764916,0.00042381263,0.0006205462,0.00019043419],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000019745354,0.0000126563,0.00023716662,0.000014109889,0.0000058447476,0.00001677679,0.000017450275,0.9960841,0.0012679236,0.0012587137,0.0000632248,0.001002292],"study_design_scores_gemma":[0.0000030462727,0.0000067881783,0.000087057226,0.0000015319303,0.0000019213335,0.000003254796,0.0000024993517,0.99867415,0.0008085129,0.00026352386,0.00014508354,0.00000267401],"about_ca_topic_score_codex":0.0073014055,"about_ca_topic_score_gemma":0.0029536604,"teacher_disagreement_score":0.0073014055,"about_ca_system_score_codex":0.00083813275,"about_ca_system_score_gemma":0.0008253476,"threshold_uncertainty_score":0.014517844},"labels":[],"label_agreement":null},{"id":"W1736795764","doi":"10.31428/10317/852","title":"Estudio experimental de la formación de porosidad por atrapamiento de aire durante la etapa lenta de inyección en máquinas de fundición a alta presión","year":2009,"lang":"es","type":"dissertation","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Canadian Obesity Network","funders":"Universidad Politécnica de Cartagena","keywords":"Humanities; Geology; Art","score_opus":0.006902427398048499,"score_gpt":0.28226597323624186,"score_spread":0.2753635458381934,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1736795764","genre_codex":"empirical","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99425066,0.00077862764,0.0025069315,0.000031907886,0.000036541704,0.000050407598,0.00022297939,0.000057094676,0.0020648378],"genre_scores_gemma":[0.9937615,0.00058280677,0.0023446525,0.000019842952,0.0000101057085,0.00004645989,0.00011855172,0.000040976396,0.003075188],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99969125,0.000038753707,0.000017214166,0.000075050266,0.00010682858,0.00007105549],"domain_scores_gemma":[0.99937314,0.00029855745,0.00008093045,0.00006926463,0.00014468886,0.00003353679],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005892549,0.00030181475,0.00037684044,0.00018493916,0.0003809413,0.00035113268,0.00030278455,0.00048694533,0.0036621355],"category_scores_gemma":[0.00067635573,0.0002594824,0.00030968589,0.0002604741,0.0004427105,0.0003868686,0.00026964184,0.00047076473,0.0003264809],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00028941897,0.000064163556,0.00051203306,0.000086130545,0.0000067600413,0.000036607576,0.00018719684,0.00020426673,0.995139,0.000049379592,0.0000716434,0.003353404],"study_design_scores_gemma":[0.000016101376,0.0007068291,0.004262534,0.000007441243,0.000017491868,0.00003570308,0.00009563812,0.0007020241,0.9926524,0.000027531696,0.0014687955,0.000007393044],"about_ca_topic_score_codex":0.00142398,"about_ca_topic_score_gemma":0.0017194607,"teacher_disagreement_score":0.0036621355,"about_ca_system_score_codex":0.00024888915,"about_ca_system_score_gemma":0.00019429409,"threshold_uncertainty_score":0.012251079},"labels":[],"label_agreement":null},{"id":"W182663362","doi":"10.1007/978-1-4614-6096-1_10","title":"Packaging, Hardening, and Shipping","year":2012,"lang":"en","type":"book-chapter","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Guelph","funders":"","keywords":"Hardening (computing); Business; Materials science; Composite material","score_opus":0.01816457421237898,"score_gpt":0.1811088900402977,"score_spread":0.16294431582791874,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W182663362","genre_codex":"other","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":"other","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0016144806,0.0800307,0.029245274,0.0007211774,0.002998418,0.00008904737,0.00028954213,0.00057866005,0.8844327],"genre_scores_gemma":[0.007032675,0.05061287,0.012315262,0.00041934007,0.00050203246,0.00007523453,0.00032896068,0.0004561273,0.92825747],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.999816,0.000011476371,0.0000064636215,0.00003478703,0.00011654813,0.00001475443],"domain_scores_gemma":[0.99991643,0.000030559713,0.0000049234454,0.000017060835,0.000024325416,0.000006732363],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016855806,0.0012442393,0.00070388895,0.0010561584,0.00072329055,0.0023605262,0.0010374098,0.0008979976,0.043120127],"category_scores_gemma":[0.00031600217,0.00054010603,0.00039984914,0.0018746208,0.000796528,0.0025177344,0.00081885845,0.0020378444,0.024921525],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003710949,0.0001230054,0.00007388949,0.0010433716,0.0000089916375,0.0001178767,0.00033479955,0.0014335869,0.00834155,0.12264535,0.18804325,0.6777973],"study_design_scores_gemma":[0.0000018404778,0.000018261733,0.00014048698,0.00014297885,0.0000033900346,0.0001682596,0.00004371789,0.00029094648,0.0015560564,0.016746497,0.98087996,0.000007661377],"about_ca_topic_score_codex":0.0006847251,"about_ca_topic_score_gemma":0.001850144,"teacher_disagreement_score":0.043120127,"about_ca_system_score_codex":0.00056059,"about_ca_system_score_gemma":0.000595335,"threshold_uncertainty_score":0.14425117},"labels":[],"label_agreement":null},{"id":"W1964350444","doi":"10.1177/0142331207075587","title":"Advances in infrared technology for the online monitoring of injection moulding: application to the understanding of the nature of contact at the polymer—mould interface","year":2007,"lang":"en","type":"article","venue":"Transactions of the Institute of Measurement and Control","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Université Laval","funders":"","keywords":"Injection moulding; Materials science; Polymer; Infrared; Thermal; Optical fiber; Composite material; Temperature measurement; Optics","score_opus":0.022615509741913516,"score_gpt":0.25251443207403806,"score_spread":0.22989892233212456,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1964350444","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.18809925,0.03427397,0.77217895,0.0005012208,0.00036508188,0.00020577418,0.00010804538,0.0012627774,0.003004908],"genre_scores_gemma":[0.43317246,0.016676879,0.5466491,0.0002652541,0.00040765954,0.00023219391,0.00011463188,0.0001663695,0.0023154458],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99873275,0.00022544464,0.000062820814,0.00025346215,0.00066083024,0.00006469213],"domain_scores_gemma":[0.9979273,0.0011072619,0.00039900414,0.00020840084,0.0003009174,0.000057037658],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0018364892,0.001076552,0.0007739877,0.0013034274,0.00025845328,0.00074936036,0.0013263393,0.0015492529,0.0012187365],"category_scores_gemma":[0.0014211702,0.0004892528,0.0006080189,0.0007222976,0.0011765553,0.0016754438,0.00057419535,0.002360752,0.0005209873],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000049956787,0.00008187565,0.0006978332,0.00030058174,0.000013943646,0.000060403694,0.00009086019,0.00046060816,0.962287,0.00076900655,0.000105771935,0.035082232],"study_design_scores_gemma":[0.000010701716,0.000506915,0.0024978337,0.000027817896,0.000046512603,0.00045030087,0.00003151237,0.010650961,0.9802188,0.00047816322,0.0050137583,0.0000666966],"about_ca_topic_score_codex":0.0002264074,"about_ca_topic_score_gemma":0.00026942338,"teacher_disagreement_score":0.0018364892,"about_ca_system_score_codex":0.00044801124,"about_ca_system_score_gemma":0.00026693227,"threshold_uncertainty_score":0.009712398},"labels":[],"label_agreement":null},{"id":"W1966521082","doi":"10.3139/217.1728","title":"Measurement and Prediction of Temperature Distribution in an Injection Molding Cavity","year":2003,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Mold; Thermocouple; Temperature measurement; Molding (decorative); Measure (data warehouse); Composite material; Heat transfer; Cooling curve; Transient (computer programming); Mechanics; Thermodynamics; Metallurgy","score_opus":0.01799227358114841,"score_gpt":0.22742678927399926,"score_spread":0.20943451569285085,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1966521082","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8230612,0.00019434432,0.17387073,0.000042671676,0.000026228103,0.000056491015,0.00018716826,0.0013222095,0.0012390142],"genre_scores_gemma":[0.98730123,0.000039757222,0.012165739,0.0000046355644,0.0000024798549,0.00001924302,0.00004846205,0.000030753512,0.00038770805],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997727,0.000023693112,0.0000057697994,0.000056890996,0.00012163199,0.000019248664],"domain_scores_gemma":[0.99932694,0.00032476248,0.00009637084,0.00008466791,0.00013497648,0.00003233173],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003134228,0.00032286314,0.0003016591,0.00038609412,0.0001613726,0.00027102072,0.0003618085,0.00035824362,0.0005975831],"category_scores_gemma":[0.0010337979,0.00026469724,0.00016557776,0.0002096211,0.00027750264,0.00037571,0.00015537227,0.00035046967,0.00022386499],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00030397403,0.00008617756,0.006371587,0.000047151567,0.00000982166,0.00006216598,0.00010912727,0.022419477,0.94008315,0.00029044237,0.00016376039,0.030053273],"study_design_scores_gemma":[0.0000256772,0.00028912403,0.01024381,0.000007514412,0.000012299804,0.00007659497,0.000016708203,0.23289847,0.75545985,0.00012651617,0.0008220631,0.00002135612],"about_ca_topic_score_codex":0.0008465044,"about_ca_topic_score_gemma":0.0006672611,"teacher_disagreement_score":0.0008465044,"about_ca_system_score_codex":0.00040555233,"about_ca_system_score_gemma":0.00026839148,"threshold_uncertainty_score":0.0029425025},"labels":[],"label_agreement":null},{"id":"W1968926392","doi":"10.1149/05806.0231ecst","title":"Cryogenic Single-Component Micro-Nano Solid Nitrogen Particle Production Using Laval Nozzle for Physical Resist Removal-Cleaning Process","year":2013,"lang":"en","type":"article","venue":"ECS Transactions","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"Japan Science and Technology Agency","keywords":"Nozzle; Subcooling; Materials science; Resist; Particle (ecology); Adiabatic process; Liquid nitrogen; Wafer; Mechanics; Nanotechnology; Chemistry; Mechanical engineering; Thermodynamics; Heat transfer; Engineering","score_opus":0.0270904813254975,"score_gpt":0.24365637843121976,"score_spread":0.21656589710572227,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1968926392","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.953032,0.00012031813,0.04419128,0.000047944763,0.000015112165,0.000021058037,0.00006930737,0.00013365295,0.0023692383],"genre_scores_gemma":[0.98141736,0.000052607826,0.018190145,0.0000030032363,0.0000013450262,0.00001162852,0.000031440813,0.000009916793,0.00028266982],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99994624,0.000003695937,0.0000017342079,0.0000091260445,0.00003191332,0.0000072317816],"domain_scores_gemma":[0.9999484,0.000014829078,0.000013768347,0.000008543353,0.000010510468,0.000003951271],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011654378,0.00012432432,0.00020458356,0.000078107674,0.00016496412,0.0001838184,0.00033496766,0.00014019362,0.00038161955],"category_scores_gemma":[0.00018415804,0.000113707974,0.00017020803,0.0000913424,0.00019815039,0.00017994527,0.00018220254,0.0001591166,0.0000503141],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008962854,0.000026480151,0.0020997266,0.00010562252,0.00000896815,0.000107429994,0.00006193786,0.044600546,0.94346124,0.0021010747,0.00011151431,0.0072257556],"study_design_scores_gemma":[0.00001801335,0.00014355368,0.0032821225,0.0000043605783,0.000010788068,0.000085257394,0.000023829993,0.38748613,0.60765105,0.00021071846,0.0010718605,0.000012261916],"about_ca_topic_score_codex":0.0013853189,"about_ca_topic_score_gemma":0.0018423558,"teacher_disagreement_score":0.0013853189,"about_ca_system_score_codex":0.0003513823,"about_ca_system_score_gemma":0.00038344527,"threshold_uncertainty_score":0.0027545094},"labels":[],"label_agreement":null},{"id":"W1972672034","doi":"10.1002/pen.20259","title":"Temperature control in injection molding. Part II: Controller design, simulation, and implementation","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Decoupling (probability); Temperature control; Model predictive control; Thermal; Injection molding machine; Molding (decorative); Materials science; Controller (irrigation); Control theory (sociology); Computer science; Control (management); Control engineering; Engineering; Composite material; Thermodynamics; Mold; Artificial intelligence; Physics","score_opus":0.009501804219981242,"score_gpt":0.23184176093365477,"score_spread":0.22233995671367354,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1972672034","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.016668936,0.00057457277,0.977517,0.00010958867,0.00007614971,0.00009544584,0.000023459304,0.0009860399,0.0039488585],"genre_scores_gemma":[0.81800807,0.0008825736,0.17515579,0.000051238323,0.00005471348,0.00029357627,0.00008442286,0.00015484472,0.0053148367],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998029,0.000049218277,0.000009371836,0.000024289551,0.00009665177,0.000017495993],"domain_scores_gemma":[0.99974877,0.00012499836,0.000023961402,0.000032931443,0.000059175265,0.000010162106],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00040794746,0.0004989511,0.00042184486,0.0001996783,0.00018384855,0.0006217293,0.00057833176,0.0005763807,0.0024675908],"category_scores_gemma":[0.0008864804,0.00035888818,0.00031350044,0.0001531607,0.00038531554,0.000538941,0.0002708402,0.00078667584,0.00038522392],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000094101095,0.00005736425,0.0005805503,0.00016401023,0.0000330584,0.000059671853,0.000054751756,0.897997,0.018285805,0.006752093,0.00061533117,0.07530621],"study_design_scores_gemma":[0.000011897532,0.000036825793,0.00012237173,0.0000068996787,0.0000055749365,0.000010017141,0.0000034820919,0.99108547,0.006511099,0.00075094146,0.001451709,0.0000037370896],"about_ca_topic_score_codex":0.0025837447,"about_ca_topic_score_gemma":0.0015941671,"teacher_disagreement_score":0.0025837447,"about_ca_system_score_codex":0.00038008866,"about_ca_system_score_gemma":0.00043320472,"threshold_uncertainty_score":0.008254945},"labels":[],"label_agreement":null},{"id":"W1978138831","doi":"10.1002/pen.20258","title":"Temperature control of injection molding. Part I: Modeling and identification","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Molding (decorative); Barrel (horology); Injection molding machine; Materials science; Series (stratigraphy); Temperature control; System identification; Mechanical engineering; Control theory (sociology); Control (management); Computer science; Composite material; Engineering; Data modeling; Geology; Artificial intelligence","score_opus":0.006951219011427346,"score_gpt":0.18856075531546504,"score_spread":0.1816095363040377,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1978138831","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.016708015,0.0007107495,0.9781838,0.00016273212,0.00006533145,0.000061587976,0.000053806645,0.00037396955,0.003680032],"genre_scores_gemma":[0.9559097,0.00095663866,0.0370886,0.00004347578,0.000035547506,0.00021832023,0.000095195486,0.00007112149,0.0055813175],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997962,0.00004593746,0.000011690298,0.00005081139,0.00007551305,0.000019851004],"domain_scores_gemma":[0.99983764,0.00006935771,0.000046561723,0.000017802175,0.000021901998,0.000006587804],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004286804,0.0006242061,0.0005391445,0.0002424424,0.00021520452,0.0006989291,0.000552312,0.00052303233,0.0014292009],"category_scores_gemma":[0.0007331874,0.00037212594,0.00052195165,0.00015710814,0.0006431108,0.000751097,0.00039859666,0.0007364752,0.00043461414],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000048004113,0.00003741628,0.00040820544,0.00013323342,0.000019499255,0.000049760674,0.000049127502,0.9448747,0.023758296,0.012953407,0.0004686691,0.01719966],"study_design_scores_gemma":[0.0000040976074,0.0000211079,0.00012749618,0.000005714979,0.000002994679,0.000010830232,0.0000028156082,0.99364245,0.004000571,0.0014210964,0.000757036,0.0000037978298],"about_ca_topic_score_codex":0.0015778892,"about_ca_topic_score_gemma":0.0007352883,"teacher_disagreement_score":0.0015778892,"about_ca_system_score_codex":0.00052685133,"about_ca_system_score_gemma":0.0004186428,"threshold_uncertainty_score":0.004781127},"labels":[],"label_agreement":null},{"id":"W1982427191","doi":"10.3139/217.1692","title":"Design Sensitivity Analysis Applied to Injection Molding for Optimization of Gate Location and Injection Pressure","year":2002,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Sensitivity (control systems); Sequential quadratic programming; Finite element method; Optimal design; Mathematical optimization; Robustness (evolution); Materials science; Quadratic programming; Control theory (sociology); Computer science; Mathematics; Engineering; Structural engineering; Electronic engineering","score_opus":0.019847479248628987,"score_gpt":0.228029224807365,"score_spread":0.20818174555873603,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1982427191","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.028506482,0.00020205953,0.96797824,0.00009310659,0.000022082804,0.0000818105,0.000026838898,0.00016129499,0.002928036],"genre_scores_gemma":[0.8688711,0.00027710904,0.12878348,0.000044375047,0.000012413893,0.00027628834,0.00004540303,0.0000768854,0.0016129519],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99943084,0.00029656946,0.000017180064,0.000042684685,0.00017758524,0.000035047502],"domain_scores_gemma":[0.99840456,0.001330367,0.00007690212,0.00004902202,0.00012374105,0.000015391195],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00196481,0.0009103956,0.0007621239,0.0006367802,0.00035817394,0.0006381366,0.00034336577,0.00061119493,0.0013908262],"category_scores_gemma":[0.0028906502,0.0005223702,0.0009217804,0.00031412995,0.00055711885,0.00037958354,0.0006097886,0.00055982004,0.0001525065],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000017517134,0.000011926935,0.00014384401,0.000042966723,0.000016048067,0.000015846224,0.000014447814,0.9899917,0.0027727187,0.0021704992,0.00004439257,0.0047580404],"study_design_scores_gemma":[0.0000026476823,0.000011962293,0.000041619445,0.0000029798007,0.0000045615757,0.0000035424905,0.0000014410996,0.9980123,0.0013786174,0.0003842786,0.00015378585,0.0000022573968],"about_ca_topic_score_codex":0.0021582083,"about_ca_topic_score_gemma":0.0011093857,"teacher_disagreement_score":0.0021582083,"about_ca_system_score_codex":0.0007541656,"about_ca_system_score_gemma":0.0009565226,"threshold_uncertainty_score":0.010390997},"labels":[{"model":"gemma","categories":[],"domain":null,"study_design":"simulation_or_modeling","genre":"empirical","about_ca_system":false,"about_ca_topic":false,"confidence":"high"},{"model":"gpt","categories":[],"domain":null,"study_design":"simulation_or_modeling","genre":"methods","about_ca_system":false,"about_ca_topic":false,"confidence":"high"}],"label_agreement":"agree"},{"id":"W1983383585","doi":"10.1002/pen.10120","title":"Three‐dimensional simulation of multi‐material injection molding: Application to gas‐assisted and co‐injection molding","year":2003,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":31,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Molding (decorative); Isothermal process; Finite element method; Work (physics); Mechanical engineering; Flow (mathematics); Mechanics; Transfer molding; Composite material; Newtonian fluid; Core (optical fiber); Polymer; Thermodynamics; Mold; Engineering; Physics","score_opus":0.015494440780866434,"score_gpt":0.23692184745002182,"score_spread":0.2214274066691554,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1983383585","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8538708,0.00027714236,0.13035953,0.0002704398,0.00008402775,0.00015378043,0.00039549015,0.0011637757,0.013424935],"genre_scores_gemma":[0.9741906,0.00011002154,0.024056729,0.000028267943,0.000006578887,0.000090927584,0.00011657753,0.00008507216,0.0013152186],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998679,0.00003197013,0.0000062995196,0.00001269481,0.00005507515,0.000026031941],"domain_scores_gemma":[0.9993974,0.00039753332,0.000046696114,0.000045625104,0.000071041104,0.000041776613],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003759153,0.00040790133,0.00045937463,0.0003312259,0.0003903111,0.00068338314,0.00057024125,0.00094112457,0.0016995393],"category_scores_gemma":[0.0008258192,0.00033453075,0.00049719925,0.00032220237,0.00062408025,0.00033815153,0.0003359839,0.00050463,0.00018277606],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00007363287,0.000057321664,0.00078589836,0.000034346995,0.000010529949,0.00007259162,0.00006453563,0.9864998,0.008090134,0.0011088012,0.0001363919,0.003066077],"study_design_scores_gemma":[0.000011639732,0.000017037491,0.00021489739,0.0000024275937,0.0000025950114,0.000009016689,0.000006333146,0.99585426,0.0034782498,0.00011892766,0.000280665,0.0000040298905],"about_ca_topic_score_codex":0.004951788,"about_ca_topic_score_gemma":0.0031116283,"teacher_disagreement_score":0.004951788,"about_ca_system_score_codex":0.00071009056,"about_ca_system_score_gemma":0.00066377677,"threshold_uncertainty_score":0.009845912},"labels":[],"label_agreement":null},{"id":"W1985357765","doi":"10.1016/j.apm.2005.06.001","title":"CFD-based predictive control of melt temperature in plastic injection molding","year":2005,"lang":"en","type":"article","venue":"Applied Mathematical Modelling","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Computational fluid dynamics; Molding (decorative); Model predictive control; Injection molding machine; Temperature control; Materials science; Coupling (piping); Barrel (horology); Mechanics; Mechanical engineering; Engineering; Computer science; Control (management); Composite material; Mold; Physics; Artificial intelligence","score_opus":0.009861894690531826,"score_gpt":0.19106912117517028,"score_spread":0.18120722648463844,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1985357765","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.33328184,0.00073350896,0.65141016,0.00068259204,0.00041630428,0.00007964514,0.00009126686,0.0012587112,0.012046034],"genre_scores_gemma":[0.99347186,0.00007013638,0.0057052756,0.00001761429,0.000013656556,0.000017143457,0.000013951603,0.0000141454375,0.00067618466],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998932,0.000022920683,0.000005315481,0.000018877898,0.000042030413,0.000017559842],"domain_scores_gemma":[0.99962175,0.00021547024,0.00004980709,0.000022815093,0.00007414139,0.000015961366],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00037794097,0.00042431266,0.0005805477,0.00035282993,0.0004611181,0.0007005703,0.0005778031,0.00051725446,0.0008214998],"category_scores_gemma":[0.0012763002,0.00039402742,0.00026029858,0.00023206115,0.0005586301,0.00059876434,0.0005605112,0.0005808021,0.00012830869],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0001258373,0.00003779517,0.00032269172,0.000037957576,0.000009760404,0.00003960092,0.00002964032,0.97627205,0.006404993,0.0016601823,0.000251233,0.014808258],"study_design_scores_gemma":[0.0000033983736,0.000006917525,0.000058563302,0.0000010185373,0.0000011528384,0.0000012632674,9.4864987e-7,0.9986192,0.0011081406,0.00013840341,0.000059555186,0.0000014997437],"about_ca_topic_score_codex":0.00851507,"about_ca_topic_score_gemma":0.006114334,"teacher_disagreement_score":0.00851507,"about_ca_system_score_codex":0.0006991069,"about_ca_system_score_gemma":0.0006004073,"threshold_uncertainty_score":0.016930997},"labels":[],"label_agreement":null},{"id":"W1985537333","doi":"10.1002/app.36868","title":"Real‐time diagnosing polymer processing in injection molding using ultrasound","year":2012,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Ultrasonic sensor; Composite material; Polymer; Molding (decorative); Shear (geology); Scanning electron microscope; Dynamic mechanical analysis; Anisotropy; Modulus; Injection moulding; Acoustics; Optics","score_opus":0.014278922848740173,"score_gpt":0.24441112067056803,"score_spread":0.23013219782182787,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1985537333","genre_codex":"empirical","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.61600363,0.0010678679,0.37967843,0.00021333122,0.00013275674,0.00009423618,0.00008049047,0.0013834058,0.0013459162],"genre_scores_gemma":[0.87571776,0.00033418887,0.12245309,0.00006846775,0.000035602403,0.000040858937,0.000049217088,0.00003493501,0.0012658663],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997019,0.000054397853,0.000013639818,0.000062704996,0.00014536949,0.000021924163],"domain_scores_gemma":[0.9993825,0.0003079283,0.00013037659,0.000044084703,0.00009985897,0.000035258447],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004135977,0.00041504603,0.00026112708,0.00046549586,0.000109212524,0.00036254132,0.00034373492,0.00041984636,0.00064405805],"category_scores_gemma":[0.00071477727,0.0002706791,0.00014937208,0.00020212385,0.00042157873,0.0005498297,0.00026896014,0.00034760634,0.00016210592],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009874828,0.000018489318,0.0011820403,0.000045366214,0.0000041045605,0.000050743107,0.000055087214,0.00054911216,0.9765445,0.00017439126,0.000095999436,0.021181393],"study_design_scores_gemma":[0.00001956764,0.00020380093,0.0027776146,0.000007730444,0.000017578299,0.00022839755,0.000030332978,0.032036886,0.96341413,0.00010594249,0.0011391091,0.00001883737],"about_ca_topic_score_codex":0.00026662197,"about_ca_topic_score_gemma":0.0003608206,"teacher_disagreement_score":0.00064405805,"about_ca_system_score_codex":0.00026205787,"about_ca_system_score_gemma":0.00020891635,"threshold_uncertainty_score":0.0021873116},"labels":[],"label_agreement":null},{"id":"W1988533607","doi":"10.5539/ijc.v4n5p48","title":"New Design and Injection Molding Analysis of a Low Smoke Zero Halogen Cable Trunk","year":2012,"lang":"en","type":"article","venue":"International Journal of Chemistry","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"Shanghai Leading Academic Discipline Project; Shanghai Municipal Education Commission","keywords":"Molding (decorative); Shrinkage; Mold; Composite material; Process (computing); Smoke; Extrusion; Trunk; Chemistry; Mechanical engineering; Materials science; Engineering; Computer science","score_opus":0.016030354074078473,"score_gpt":0.2370569884306969,"score_spread":0.22102663435661843,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1988533607","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8466449,0.00031237226,0.14598687,0.000076310775,0.000027441845,0.000090228314,0.00011728251,0.00045947527,0.0062850965],"genre_scores_gemma":[0.98632216,0.00010657668,0.012029282,0.0000050841536,0.0000032873195,0.000021388356,0.00003222454,0.000016158732,0.0014639097],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999069,0.000009662205,0.0000031015318,0.000018212431,0.000048801227,0.000013318097],"domain_scores_gemma":[0.99987423,0.000023695493,0.000046147077,0.0000116690335,0.00003078512,0.000013471345],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011834466,0.00021152142,0.00021671508,0.00021774406,0.0001297316,0.0002491045,0.0003335108,0.00021849689,0.0008966778],"category_scores_gemma":[0.00016909154,0.00014573759,0.000254837,0.00011575057,0.00020144008,0.00018141119,0.00014136093,0.00011715448,0.0001139006],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00015666574,0.000047240992,0.004294314,0.00029807183,0.000023964554,0.00045678302,0.00015705559,0.16813317,0.8061172,0.0026312561,0.00029138476,0.017392913],"study_design_scores_gemma":[0.000058095095,0.0014423812,0.010140235,0.000031670483,0.000060673658,0.000324809,0.00006844406,0.71410036,0.26846737,0.0004123818,0.004865094,0.000028479863],"about_ca_topic_score_codex":0.0011809815,"about_ca_topic_score_gemma":0.0011017392,"teacher_disagreement_score":0.0011809815,"about_ca_system_score_codex":0.0004354728,"about_ca_system_score_gemma":0.00044049224,"threshold_uncertainty_score":0.0031595826},"labels":[],"label_agreement":null},{"id":"W1988919151","doi":"10.1115/1.4027491","title":"Comprehensive Online Control Strategies for Plastic Injection Molding Process","year":2014,"lang":"en","type":"article","venue":"Journal of Manufacturing Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Feed forward; PID controller; Temperature control; Process (computing); Controller (irrigation); Molding (decorative); Finite element method; Computer science; Injection molding machine; Adaptive control; Control theory (sociology); Mold; Control engineering; Materials science; Mechanical engineering; Engineering; Control (management); Composite material","score_opus":0.01153552839178227,"score_gpt":0.22600828801629158,"score_spread":0.21447275962450932,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1988919151","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.03014468,0.00039512102,0.96385074,0.00004560525,0.000039264203,0.000054400873,0.000012442826,0.00060284685,0.00485486],"genre_scores_gemma":[0.9564063,0.00021950199,0.040850278,0.000036911897,0.000025175641,0.0000733209,0.000025816697,0.000021921423,0.0023408032],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9996406,0.00003900041,0.00001895641,0.00010123405,0.00016276319,0.00003749581],"domain_scores_gemma":[0.99979395,0.000052179046,0.00004976847,0.000027247892,0.000064483545,0.00001229001],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003173345,0.0008370257,0.00048031946,0.00031923005,0.00032341212,0.00058531365,0.00069863535,0.00039556518,0.0012033278],"category_scores_gemma":[0.00041034436,0.00027038352,0.00033085851,0.00014297805,0.0003255494,0.0005413796,0.0007660719,0.00044881055,0.00024368736],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00027340924,0.000257823,0.00069325516,0.0004644921,0.000064793705,0.00022264343,0.00026068682,0.54298866,0.1350396,0.009485675,0.0009922163,0.30925676],"study_design_scores_gemma":[0.000018176092,0.00027275362,0.00040459307,0.00001371365,0.000022880195,0.000052842275,0.000015503869,0.97893333,0.017545171,0.0010964425,0.0016108616,0.0000137286725],"about_ca_topic_score_codex":0.0012850789,"about_ca_topic_score_gemma":0.0015746609,"teacher_disagreement_score":0.0012850789,"about_ca_system_score_codex":0.0002700826,"about_ca_system_score_gemma":0.00045201735,"threshold_uncertainty_score":0.004025519},"labels":[],"label_agreement":null},{"id":"W1991650650","doi":"10.1002/app.25792","title":"Characterization of molecular orientation in injection–stretch–blow‐molded poly(ethylene terephthalate) bottles by means of external reflection infrared spectroscopy","year":2007,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; National Research Council Canada","funders":"","keywords":"Materials science; Attenuated total reflection; Bottle; Mold; Orientation (vector space); Reflection (computer programming); Infrared; Composite material; Infrared spectroscopy; Spectroscopy; Optics; Geometry; Chemistry; Physics","score_opus":0.006224366033474129,"score_gpt":0.23598240314986058,"score_spread":0.22975803711638645,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1991650650","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9955937,0.00015503587,0.003729307,0.000010959506,0.000008563074,0.000013840353,0.00011131164,0.00005806426,0.00031922403],"genre_scores_gemma":[0.9898144,0.00031398653,0.008223651,0.000026761136,0.0000071896843,0.00003970443,0.00032351146,0.000095532894,0.0011552038],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997955,0.000022759597,0.000010496201,0.000040438626,0.0001005174,0.000030310828],"domain_scores_gemma":[0.99959844,0.000084094696,0.0001754239,0.000028625807,0.00006691742,0.000046494944],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002585632,0.00041637343,0.00029503586,0.00021408484,0.000117288284,0.00043014437,0.00021436632,0.00020418581,0.0005882913],"category_scores_gemma":[0.0005030552,0.000297299,0.00021940775,0.0001803983,0.00025127205,0.00034948374,0.00018495326,0.00039475245,0.0002509156],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000046828813,0.000009550203,0.00033066937,0.000011377394,0.0000018716578,0.000017782842,0.000020378468,0.00006942108,0.9986719,0.000011095981,0.000006162712,0.00080308266],"study_design_scores_gemma":[0.000004979215,0.00016189663,0.009514998,0.0000032374799,0.000011113741,0.00005084441,0.00002564818,0.0011225508,0.98883176,0.000008399827,0.0002537698,0.000010903168],"about_ca_topic_score_codex":0.00034582472,"about_ca_topic_score_gemma":0.00038095383,"teacher_disagreement_score":0.0005882913,"about_ca_system_score_codex":0.00014496685,"about_ca_system_score_gemma":0.00015785264,"threshold_uncertainty_score":0.0019680262},"labels":[],"label_agreement":null},{"id":"W1996232593","doi":"10.1115/detc2013-12570","title":"On-Line Thermal Control for Injection Moulding Process","year":2013,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Injection moulding; Process (computing); Process control; Controller (irrigation); Temperature control; Thermal; Computer science; Materials science; Mechanical engineering; Automotive engineering; Engineering","score_opus":0.016970815109240197,"score_gpt":0.23682042875047368,"score_spread":0.21984961364123348,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1996232593","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.1849608,0.00068943604,0.8002936,0.00013212275,0.0001263361,0.00019593725,0.00008723166,0.0025223864,0.010992164],"genre_scores_gemma":[0.97703326,0.00011758337,0.020729838,0.00003927346,0.000020059417,0.000043002474,0.00003629386,0.000068903006,0.0019117442],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999511,0.00006379962,0.00001676034,0.00012377709,0.00023697654,0.000047676327],"domain_scores_gemma":[0.9995906,0.00010780591,0.000106991334,0.00006716502,0.00011252489,0.000015011804],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022365424,0.000586589,0.0004077694,0.00025058782,0.0003155515,0.00058986904,0.00077934196,0.00032530678,0.0024216773],"category_scores_gemma":[0.0005527012,0.00019155875,0.00022031965,0.00014632521,0.00024212177,0.0003862622,0.00037499523,0.00038469912,0.00035194404],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0007370282,0.00035795083,0.0020477937,0.00047760678,0.00003773699,0.00018340893,0.00026467015,0.0883408,0.6193044,0.0016164088,0.0014684665,0.28516382],"study_design_scores_gemma":[0.00006476688,0.0007251288,0.0034702937,0.000036100075,0.000051606872,0.00021904764,0.00005361181,0.61591065,0.37090516,0.00080341945,0.007718997,0.00004125956],"about_ca_topic_score_codex":0.0009485025,"about_ca_topic_score_gemma":0.0012633656,"teacher_disagreement_score":0.0024216773,"about_ca_system_score_codex":0.00036808156,"about_ca_system_score_gemma":0.00036429544,"threshold_uncertainty_score":0.008101344},"labels":[],"label_agreement":null},{"id":"W1997929211","doi":"10.1002/pen.22062","title":"Feasibility study of thin microinjection molded components","year":2011,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Ontario Tech University; University of Calgary","funders":"University of Toronto","keywords":"Materials science; Linear low-density polyethylene; Composite material; Molding (decorative); Linear density; Shrinkage; Miniaturization; Melt flow index; Composite number; Viscosity; Polyethylene; Polymer; Nanotechnology","score_opus":0.04282324575445747,"score_gpt":0.22094821268165193,"score_spread":0.17812496692719446,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1997929211","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9642191,0.00034287458,0.033968307,0.000044390523,0.00004060626,0.000108323955,0.00004397733,0.00019363243,0.0010388128],"genre_scores_gemma":[0.97157574,0.00010525041,0.027452758,0.00001327269,0.0000051015536,0.00002896347,0.00004117081,0.0000148392555,0.00076288136],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99984777,0.0000131226525,0.000010143437,0.000028406275,0.00008356222,0.000017049366],"domain_scores_gemma":[0.99939895,0.00024004208,0.00012267448,0.0000803555,0.00010989466,0.000048039696],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00030187806,0.00026816,0.0001400827,0.00022127014,0.0001099014,0.00019385369,0.00025061864,0.00025724177,0.0007375287],"category_scores_gemma":[0.0006880984,0.00015216108,0.00014768826,0.000070202565,0.00021565602,0.00031565077,0.0001571399,0.0002086687,0.00013561877],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006267809,0.00003657128,0.00049925933,0.000048023056,0.000003241966,0.00011546067,0.000033265394,0.0007587367,0.9928439,0.00022798055,0.000023817978,0.005346927],"study_design_scores_gemma":[0.000012797278,0.0005459584,0.0015674112,0.000007804317,0.000009545931,0.00010454785,0.000013260925,0.004480818,0.992417,0.000034590532,0.0008017827,0.0000045270212],"about_ca_topic_score_codex":0.00019846653,"about_ca_topic_score_gemma":0.0002665559,"teacher_disagreement_score":0.0007375287,"about_ca_system_score_codex":0.00012526344,"about_ca_system_score_gemma":0.00019435691,"threshold_uncertainty_score":0.002467215},"labels":[],"label_agreement":null},{"id":"W1998903651","doi":"10.1002/pen.11212","title":"Numerical and experimental studies on the ejection of injection‐molded plastic products","year":2000,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":34,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Mold; Molding (decorative); Injector; Deformation (meteorology); Finite element method; Polycarbonate; Stress (linguistics); Composite material; Mechanical engineering; Mechanics; Structural engineering; Engineering; Physics","score_opus":0.017039567195229827,"score_gpt":0.22618254973657026,"score_spread":0.20914298254134042,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1998903651","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9936992,0.00014412942,0.0046547293,0.00002549403,0.000011959733,0.000021943675,0.000053770702,0.000045671648,0.0013430605],"genre_scores_gemma":[0.99646133,0.00007002326,0.0030813338,0.0000033612062,0.0000022983183,0.000012692671,0.000038654813,0.0000055379464,0.0003248275],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996074,0.000056065182,0.000029270306,0.000045534005,0.00019414553,0.00006763861],"domain_scores_gemma":[0.9984139,0.0009844259,0.00021910925,0.00014780922,0.00017783277,0.00005695282],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008228316,0.00029590094,0.00039214885,0.0003790865,0.00033982735,0.00032775174,0.00048176316,0.0004692531,0.001347864],"category_scores_gemma":[0.0021128685,0.00017457297,0.00025194953,0.00038846862,0.0007007759,0.00043242655,0.00034880405,0.00031969667,0.00010518746],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0014728367,0.0010822052,0.011053478,0.0007253985,0.000046578305,0.00068128575,0.0008665795,0.24238637,0.6986394,0.0027951712,0.0003626761,0.039888043],"study_design_scores_gemma":[0.0001505828,0.0032487968,0.01430868,0.0000424795,0.000039244274,0.00022077314,0.00025466195,0.38753617,0.591764,0.00039811165,0.001980358,0.000056220295],"about_ca_topic_score_codex":0.000435842,"about_ca_topic_score_gemma":0.0004207747,"teacher_disagreement_score":0.001347864,"about_ca_system_score_codex":0.00031013796,"about_ca_system_score_gemma":0.00011984048,"threshold_uncertainty_score":0.0045090914},"labels":[],"label_agreement":null},{"id":"W1999382214","doi":"10.1002/pen.20595","title":"Injection molding shrinkage of PP: Experimental progress","year":2006,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":46,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Shrinkage; Mold; Molding (decorative); Materials science; Flow (mathematics); Composite material; Factorial experiment; Anisotropy; Engineering drawing; Geometry; Mathematics; Optics; Physics; Engineering","score_opus":0.006065333649550034,"score_gpt":0.2028023042751661,"score_spread":0.19673697062561607,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1999382214","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.84553015,0.008885822,0.113601424,0.00026977525,0.0002245744,0.002105048,0.0024028209,0.0011339174,0.025846485],"genre_scores_gemma":[0.9261015,0.008876175,0.05314557,0.00012556132,0.00013348709,0.0006400593,0.002376177,0.0003386882,0.0082628],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9987857,0.00015653393,0.00009749863,0.00027367595,0.0005847715,0.000101868194],"domain_scores_gemma":[0.9990528,0.00023615357,0.000111795154,0.0002206755,0.00031240573,0.00006613979],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0017331443,0.000805467,0.0006910425,0.0007215601,0.00043637975,0.00033201976,0.0005619065,0.0004549992,0.0026776944],"category_scores_gemma":[0.0012810682,0.00034164242,0.00035665632,0.0012156403,0.00044413877,0.000630099,0.0003548011,0.0014082433,0.0012327519],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00018532139,0.00056290603,0.00035866612,0.00042184323,0.00001596995,0.00009068828,0.00022519428,0.0017375357,0.96637315,0.00040527817,0.00041257692,0.029210694],"study_design_scores_gemma":[0.00002437181,0.0007813101,0.0014499966,0.000017589195,0.000021117805,0.00006649079,0.000014659578,0.0010140366,0.9913783,0.00007925324,0.005139103,0.0000138272235],"about_ca_topic_score_codex":0.00065894984,"about_ca_topic_score_gemma":0.00041341185,"teacher_disagreement_score":0.0026776944,"about_ca_system_score_codex":0.00029770943,"about_ca_system_score_gemma":0.00038143355,"threshold_uncertainty_score":0.009165823},"labels":[],"label_agreement":null},{"id":"W2000641801","doi":"10.1016/j.matlet.2008.03.027","title":"Sintering of 17-4PH stainless steel feedstock for metal injection molding","year":2008,"lang":"en","type":"article","venue":"Materials Letters","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":50,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Western University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Sintering; Materials science; Raw material; Metal injection molding; Metallurgy; Molding (decorative); Hydrogen; Metal; Atmosphere (unit); Atmospheric temperature range; Composite material","score_opus":0.02280263611060764,"score_gpt":0.20772634981498722,"score_spread":0.18492371370437957,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2000641801","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9933089,0.00027883414,0.0018069393,0.000024913012,0.000027502283,0.000021804746,0.00016131326,0.0000830585,0.004286766],"genre_scores_gemma":[0.9963463,0.00014688743,0.0014266672,0.000007837966,0.000003200972,0.0000059708345,0.00014241014,0.000030075269,0.0018906994],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998822,0.000007505232,0.000008011786,0.000019835546,0.00005289267,0.000029557865],"domain_scores_gemma":[0.9999236,0.000013002087,0.000020534546,0.000010855012,0.000020454861,0.000011555155],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00015401801,0.00025285315,0.00023106784,0.0002645406,0.0001974567,0.0002449317,0.00014592503,0.00020193122,0.0013492075],"category_scores_gemma":[0.00017192545,0.00014689601,0.00017861329,0.00032426114,0.00013718761,0.00021038076,0.00013614936,0.00024188435,0.0004696328],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000068528534,0.000008598712,0.00025650836,0.000041418214,0.0000031210946,0.000055005337,0.000027179909,0.00021993493,0.9973014,0.00009967355,0.000056195862,0.001862487],"study_design_scores_gemma":[0.0000027841543,0.00006903751,0.00078497105,0.0000017972784,0.0000024994536,0.000015631482,0.0000121441135,0.00046186507,0.9981502,0.000010016931,0.00048756885,0.0000015256314],"about_ca_topic_score_codex":0.00070496876,"about_ca_topic_score_gemma":0.0029153884,"teacher_disagreement_score":0.0013492075,"about_ca_system_score_codex":0.00031654164,"about_ca_system_score_gemma":0.00033541088,"threshold_uncertainty_score":0.0045135617},"labels":[],"label_agreement":null},{"id":"W2002133456","doi":"10.1002/pc.20084","title":"Study on mechanical properties and material distribution of sandwich plaques molded by co‐injection","year":2005,"lang":"en","type":"article","venue":"Polymer Composites","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Polytechnique Montréal","funders":"","keywords":"Materials science; Composite material; Flexural strength; Flexural modulus; Polypropylene; Molding (decorative); Core (optical fiber); Glass fiber; Optical microscope; Modulus; Fiber; Elastic modulus; Izod impact strength test; Scanning electron microscope; Ultimate tensile strength","score_opus":0.01827662711430059,"score_gpt":0.22306755497646485,"score_spread":0.20479092786216427,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2002133456","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99746394,0.00019313909,0.001992148,0.0000034156403,0.0000050004296,0.00000625356,0.00001461958,0.00001774662,0.00030365374],"genre_scores_gemma":[0.99819726,0.0000736754,0.0013048067,0.0000041226135,0.0000015248683,0.0000049140713,0.000023053115,0.000009091265,0.0003816476],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998424,0.000016268794,0.000006946445,0.00003744027,0.000069588146,0.000027365048],"domain_scores_gemma":[0.9995914,0.00011260646,0.00010612784,0.00005088666,0.000091130714,0.00004777329],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00025679212,0.0002908516,0.00022698924,0.0003134843,0.00010609175,0.00021901104,0.00012847311,0.0002107757,0.0006106767],"category_scores_gemma":[0.0003655048,0.00018180322,0.00020105342,0.00014675011,0.00023825711,0.00019558535,0.00018488786,0.0002878568,0.00020026918],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000033087035,0.000012407993,0.00028071355,0.0000092853,0.0000030055567,0.000021082287,0.000013764622,0.00009991839,0.9986307,0.000015438345,0.00000368251,0.00087687105],"study_design_scores_gemma":[0.0000024936903,0.00015601648,0.0028381136,0.000002236046,0.000008263415,0.00004395966,0.0000070168826,0.0007525411,0.99607086,0.0000049987825,0.00011105074,0.0000023624132],"about_ca_topic_score_codex":0.00015895616,"about_ca_topic_score_gemma":0.00020224626,"teacher_disagreement_score":0.0006106767,"about_ca_system_score_codex":0.000103018785,"about_ca_system_score_gemma":0.000073414005,"threshold_uncertainty_score":0.0020429492},"labels":[],"label_agreement":null},{"id":"W2002517596","doi":"10.3139/217.1908","title":"Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation","year":2006,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Mold; Transfer molding; Dimensionless quantity; Composite material; Viscosity; Jet (fluid); Molding (decorative); Heat transfer; Flow (mathematics); Thermal conduction; Mechanics","score_opus":0.013043660683902988,"score_gpt":0.24674313731854686,"score_spread":0.23369947663464385,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2002517596","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98933977,0.00010664125,0.00576713,0.000080593294,0.000015195733,0.0000791009,0.000449308,0.00024314494,0.0039191246],"genre_scores_gemma":[0.9951468,0.000043648884,0.004051901,0.000015458994,0.000004123497,0.00007013533,0.00019135709,0.000018996872,0.000457429],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997342,0.00005406333,0.000015733882,0.00005458607,0.000065458065,0.00007597514],"domain_scores_gemma":[0.99824286,0.001269174,0.00011676004,0.000097227596,0.00020185778,0.00007214194],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00083478756,0.0006028386,0.0008252159,0.0007434322,0.00053600426,0.0006678202,0.00090044754,0.0014159806,0.0016054721],"category_scores_gemma":[0.0016469518,0.0003297152,0.0006442622,0.00064183376,0.0007763096,0.0005697029,0.000402708,0.0008066726,0.00014226408],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00020434706,0.00025300603,0.0038776556,0.00007028123,0.000018280003,0.00008008858,0.00007541657,0.98869437,0.003235015,0.000839703,0.00019455857,0.0024572776],"study_design_scores_gemma":[0.000020282918,0.000054717257,0.000424398,0.000003912352,0.0000037935292,0.0000045480087,0.000010509611,0.99747247,0.0018108276,0.00010985482,0.00007846232,0.000006252171],"about_ca_topic_score_codex":0.009349184,"about_ca_topic_score_gemma":0.004625595,"teacher_disagreement_score":0.009349184,"about_ca_system_score_codex":0.0010759896,"about_ca_system_score_gemma":0.00065704377,"threshold_uncertainty_score":0.018589556},"labels":[],"label_agreement":null},{"id":"W2006778707","doi":"10.3139/217.2264","title":"Micro Replication by Injection-Compression Molding","year":2009,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":22,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University; National Research Council Canada","funders":"","keywords":"Materials science; Microstructure; Replication (statistics); Molding (decorative); Compression molding; Composite material; Polymer; Mold","score_opus":0.009237141157810285,"score_gpt":0.24357543691040398,"score_spread":0.23433829575259368,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2006778707","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9352821,0.0016959074,0.059752543,0.000045430934,0.00007799682,0.00029508545,0.00019341808,0.00056344183,0.0020940541],"genre_scores_gemma":[0.9637526,0.00045306367,0.0342578,0.000010630206,0.000016175958,0.000093367154,0.00010390144,0.00003805037,0.0012742963],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997009,0.000025374497,0.000026341204,0.00008525203,0.00013119844,0.00003098996],"domain_scores_gemma":[0.99940705,0.0002664861,0.00016113749,0.00008942526,0.000056095017,0.000019681494],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002905866,0.00036536792,0.00024447183,0.00028867717,0.00014542567,0.00019906863,0.00027342798,0.00015920462,0.00082534837],"category_scores_gemma":[0.0004338945,0.00018509792,0.00017104052,0.00020294727,0.00026880967,0.00018072301,0.00019750228,0.0002860078,0.00023253224],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000015831054,0.000013840364,0.00011012208,0.000042383428,0.0000013716655,0.000026578655,0.000017368962,0.00028420976,0.99566287,0.000058160073,0.000018406563,0.0037488993],"study_design_scores_gemma":[0.000003389784,0.0001460288,0.0006170781,0.000002302209,0.0000030567833,0.00003687302,0.000003016455,0.001475336,0.99705124,0.0000081720245,0.0006503313,0.0000030508768],"about_ca_topic_score_codex":0.0003576291,"about_ca_topic_score_gemma":0.0006885447,"teacher_disagreement_score":0.00082534837,"about_ca_system_score_codex":0.0002102709,"about_ca_system_score_gemma":0.00016330782,"threshold_uncertainty_score":0.002761066},"labels":[],"label_agreement":null},{"id":"W2007375153","doi":"10.1007/s12555-013-0348-6","title":"Thermal management in laminated die system","year":2014,"lang":"en","type":"article","venue":"International Journal of Control Automation and Systems","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Artificial neural network; Backpropagation; Process (computing); PID controller; Control engineering; Die (integrated circuit); Controller (irrigation); Control theory (sociology); System dynamics; Computer science; Fuzzy logic; Finite element method; Radial basis function; Temperature control; Engineering; Control (management); Mechanical engineering; Artificial intelligence","score_opus":0.005570909820684119,"score_gpt":0.2027188617473255,"score_spread":0.1971479519266414,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2007375153","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7939998,0.00078764686,0.18984777,0.00014192908,0.00006799475,0.000041277883,0.000053969237,0.00060317933,0.014456438],"genre_scores_gemma":[0.9945527,0.00005641742,0.003285733,0.000011664785,0.000006779578,0.0000089172145,0.000014678578,0.000010455948,0.002052691],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99991894,0.000019509309,0.0000033875074,0.000019610823,0.000023099134,0.000015429527],"domain_scores_gemma":[0.9999417,0.00001305478,0.000009840882,0.000009103247,0.000021818174,0.0000044620783],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000093072325,0.00016878307,0.0002270191,0.00013328955,0.00038125613,0.00033279235,0.00029670267,0.00017594041,0.0019254257],"category_scores_gemma":[0.000115585884,0.00009252025,0.00016538038,0.000110711,0.00014312429,0.0003608041,0.00017563786,0.00014995417,0.00021029252],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0005356027,0.00017899316,0.005153319,0.00030275335,0.00008603322,0.0005085118,0.0003364186,0.3593215,0.521609,0.006035799,0.0015146598,0.104417354],"study_design_scores_gemma":[0.000015254325,0.0004422377,0.00421067,0.000015185467,0.00004081561,0.000116686744,0.00010599907,0.907841,0.08320461,0.0012699798,0.0027197187,0.000017795886],"about_ca_topic_score_codex":0.00035013387,"about_ca_topic_score_gemma":0.0007545358,"teacher_disagreement_score":0.0019254257,"about_ca_system_score_codex":0.00021706332,"about_ca_system_score_gemma":0.00015113097,"threshold_uncertainty_score":0.0064412355},"labels":[],"label_agreement":null},{"id":"W2007728975","doi":"10.1208/pt0801023","title":"Application of thermal effusivity as a process analytical technology tool for monitoring and control of the roller compaction process","year":2007,"lang":"en","type":"article","venue":"AAPS PharmSciTech","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":25,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Women's Health Research Institute","funders":"","keywords":"Thermal effusivity; Compaction; Process (computing); Process engineering; Process analytical technology; Thermal; Computer science; Materials science; Work in process; Engineering; Composite material; Thermodynamics; Physics","score_opus":0.00948062138999798,"score_gpt":0.2816223325364081,"score_spread":0.2721417111464101,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2007728975","genre_codex":"empirical","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.87163705,0.002448745,0.12116073,0.00016274911,0.0000878273,0.000092304785,0.00013477355,0.0002965294,0.0039793765],"genre_scores_gemma":[0.9672705,0.0007357478,0.030311564,0.00005678891,0.000019774312,0.00003755681,0.000039997623,0.000023521217,0.0015046345],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99940073,0.00012817414,0.0000319282,0.00013298723,0.00026155828,0.000044613553],"domain_scores_gemma":[0.99927515,0.0003221816,0.00013548172,0.00007832605,0.00016550487,0.000023440494],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008347247,0.00038482697,0.0002735307,0.0006305171,0.00036314165,0.00060003204,0.00033983268,0.0005254228,0.00047039913],"category_scores_gemma":[0.0012020367,0.0002906886,0.00025490942,0.0005209292,0.0005110723,0.00061061035,0.0003614372,0.0005666626,0.00014357317],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00012052411,0.000027944887,0.000958553,0.00003526748,0.0000068681966,0.00004121637,0.00005857815,0.00023386188,0.98833174,0.00022308937,0.000028676031,0.009933729],"study_design_scores_gemma":[0.0000026319437,0.00009070928,0.0016517632,0.0000030391698,0.000009462369,0.00008311165,0.000012086384,0.0026567802,0.995076,0.000030238978,0.0003777698,0.000006374765],"about_ca_topic_score_codex":0.0004875498,"about_ca_topic_score_gemma":0.00086415606,"teacher_disagreement_score":0.0008347247,"about_ca_system_score_codex":0.00032644512,"about_ca_system_score_gemma":0.0002921946,"threshold_uncertainty_score":0.004414439},"labels":[],"label_agreement":null},{"id":"W2011979673","doi":"10.3139/217.0121","title":"Numerical Simulation of the Effect of Processing Parameters on the Flow Behavior and Break-through Phenomenon in Co-Injection Molding","year":2006,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Mechanics; Flow (mathematics); Materials science; Core (optical fiber); Molding (decorative); Isothermal flow; Newtonian fluid; Isothermal process; Momentum (technical analysis); Computer simulation; Mechanical engineering; Thermodynamics; Open-channel flow; Composite material; Engineering; Physics","score_opus":0.011533462437384265,"score_gpt":0.25350357859169326,"score_spread":0.241970116154309,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2011979673","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9679937,0.0000661758,0.028772216,0.00005970292,0.000022246848,0.00003786511,0.00008325413,0.00028192942,0.0026829487],"genre_scores_gemma":[0.9910657,0.000026016307,0.0082425205,0.00000664312,0.0000015793335,0.000025199499,0.000035503926,0.000014526771,0.00058236934],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99991643,0.000016006245,0.0000045877205,0.000011295099,0.000030016401,0.000021685237],"domain_scores_gemma":[0.9992937,0.00045475655,0.00009144723,0.000051819727,0.00007252073,0.00003566409],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00028067568,0.0002967369,0.0002783885,0.00028588346,0.00029147757,0.00032384225,0.00035541033,0.0005397206,0.0011831152],"category_scores_gemma":[0.0009876945,0.00020237493,0.00027129063,0.00019182797,0.000443764,0.00030697678,0.00018830234,0.0002903698,0.00010504863],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0001908484,0.00012446345,0.0028754426,0.00005154133,0.000013205991,0.00012242915,0.0000938611,0.9507246,0.0382928,0.0012451361,0.0001424821,0.006123166],"study_design_scores_gemma":[0.000008586674,0.000035662055,0.0003257627,0.0000019416573,0.0000023908385,0.0000068471204,0.000005099356,0.9923745,0.0070888153,0.00005589542,0.000091833725,0.000002627383],"about_ca_topic_score_codex":0.0030441047,"about_ca_topic_score_gemma":0.0018865294,"teacher_disagreement_score":0.0030441047,"about_ca_system_score_codex":0.00046414844,"about_ca_system_score_gemma":0.0004275923,"threshold_uncertainty_score":0.0060527325},"labels":[],"label_agreement":null},{"id":"W2013638824","doi":"10.1002/pen.10119","title":"Optimization of blow molded part performance through process simulation","year":2003,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":22,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Deflection (physics); Finite element method; Constraint (computer-aided design); Process (computing); Mathematical optimization; Stability (learning theory); Work (physics); Materials science; Optimization problem; Computer science; Structural engineering; Mechanical engineering; Mathematics; Engineering; Physics","score_opus":0.013091229360599749,"score_gpt":0.2170546859759942,"score_spread":0.20396345661539445,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2013638824","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.48667815,0.00022511552,0.50132924,0.00013686501,0.00002459829,0.00012907785,0.00008958219,0.00050940656,0.010877937],"genre_scores_gemma":[0.95895475,0.000049958344,0.03972958,0.000010997483,0.0000030431568,0.000072571485,0.00004473712,0.000043222233,0.0010911603],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99985456,0.00003766452,0.0000050892413,0.000016907432,0.00006338996,0.000022357752],"domain_scores_gemma":[0.999699,0.00017420613,0.00004053921,0.000028862967,0.000047433477,0.000009992426],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005832276,0.00048450215,0.0005169789,0.000263346,0.00029972833,0.0005491504,0.0003614503,0.0004773492,0.0013487507],"category_scores_gemma":[0.0009323312,0.00034271384,0.00036038607,0.00016486882,0.00042016828,0.00037188464,0.00029878426,0.000370507,0.00016402054],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000024625604,0.000010088849,0.00013509781,0.000018549297,0.0000054556895,0.000012612555,0.000010117775,0.99008757,0.006256405,0.0006801158,0.00003343022,0.0027259765],"study_design_scores_gemma":[0.000008089595,0.000021886424,0.00006510624,0.0000021203596,0.0000024786561,0.0000022447034,0.0000021772146,0.99627614,0.0033261229,0.00017632025,0.00011533881,0.0000020903012],"about_ca_topic_score_codex":0.0021864292,"about_ca_topic_score_gemma":0.0016407673,"teacher_disagreement_score":0.0021864292,"about_ca_system_score_codex":0.0006491303,"about_ca_system_score_gemma":0.0009257429,"threshold_uncertainty_score":0.0047097206},"labels":[],"label_agreement":null},{"id":"W2015755766","doi":"10.1002/cjce.5450800616","title":"Present Challenges in the Numerical Modeling of Polymer‐forming Processes","year":2002,"lang":"en","type":"article","venue":"The Canadian Journal of Chemical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Extrusion; Molding (decorative); Extrusion moulding; Reactive extrusion; Polymer; Numerical modeling; Materials science; Computer science; Mechanical engineering; Composite material; Engineering; Geology","score_opus":0.03842739058807944,"score_gpt":0.1942446428367505,"score_spread":0.15581725224867105,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2015755766","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.06717454,0.0360339,0.8462306,0.013568901,0.00096377253,0.00014554216,0.00036574365,0.0011823239,0.0343346],"genre_scores_gemma":[0.68329364,0.03392605,0.26704276,0.0008931358,0.0015992402,0.0005950001,0.0004103346,0.0006188657,0.011620986],"study_design_codex":"simulation_or_modeling","study_design_gemma":"theoretical_or_conceptual","domain_scores_codex":[0.9988751,0.00045614893,0.000091497015,0.00011613458,0.00039135176,0.000069763766],"domain_scores_gemma":[0.99798334,0.0012013621,0.00010643716,0.00022799835,0.0003887318,0.00009207048],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0025583084,0.0008448505,0.0018700404,0.0006030394,0.0011528976,0.0033132366,0.0019200615,0.002622986,0.001953016],"category_scores_gemma":[0.005058594,0.000804248,0.0010013907,0.00078846194,0.002104372,0.0033795969,0.0013030134,0.002614773,0.0012451409],"study_design_candidate":"theoretical_or_conceptual","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000025220563,0.00003402522,0.0004882231,0.00018742215,0.000018088158,0.000056638404,0.00010668589,0.9133592,0.0019306118,0.06741931,0.0013244627,0.01505016],"study_design_scores_gemma":[0.000017348506,0.00001791017,0.0001421401,0.000044377455,0.0000069931584,0.00005240324,0.000044624663,0.9552871,0.0005013548,0.032285582,0.011578501,0.000021684227],"about_ca_topic_score_codex":0.0066152643,"about_ca_topic_score_gemma":0.0031349624,"teacher_disagreement_score":0.0066152643,"about_ca_system_score_codex":0.0012280799,"about_ca_system_score_gemma":0.001693946,"threshold_uncertainty_score":0.0135297775},"labels":[],"label_agreement":null},{"id":"W2020176286","doi":"10.1002/pen.20720","title":"An investigation on the application of predictive control for controlling screw position and velocity on an injection molding machine","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":27,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Setpoint; Controller (irrigation); Control theory (sociology); Model predictive control; Open-loop controller; Injection molding machine; Position (finance); Materials science; Molding (decorative); Tracking (education); Computer science; Mold; Control engineering; Engineering; Closed loop; Control (management); Artificial intelligence; Composite material","score_opus":0.010038085414349996,"score_gpt":0.22032046229113098,"score_spread":0.21028237687678097,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2020176286","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.82597244,0.00047523514,0.16491562,0.00024501074,0.000091880785,0.00019760641,0.000024680608,0.0007627969,0.007314729],"genre_scores_gemma":[0.99329585,0.00005405953,0.0061736484,0.000010121349,0.000003744953,0.000014756195,0.0000053393674,0.000004473914,0.00043798785],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99971026,0.00007019043,0.000010712274,0.000032996628,0.0001479715,0.0000277718],"domain_scores_gemma":[0.9992436,0.00044125807,0.000041799034,0.00007326513,0.00017699711,0.000023014554],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00047866214,0.00030120905,0.0002693877,0.00027099284,0.00034189603,0.00041234898,0.0006932688,0.0005189817,0.0010231492],"category_scores_gemma":[0.0016465114,0.00019089105,0.00014737246,0.00018727225,0.00030096908,0.00033155255,0.00024225064,0.000315516,0.0001047117],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.001549819,0.0006271024,0.0068809446,0.0005723776,0.0000692523,0.0009328364,0.0005383741,0.19858232,0.46240166,0.0048841764,0.0009617876,0.3219994],"study_design_scores_gemma":[0.000051008115,0.0013184368,0.0034722735,0.00001914938,0.000049626815,0.00014808682,0.00005314456,0.8343712,0.15826292,0.00047570944,0.0017608888,0.000017440034],"about_ca_topic_score_codex":0.0018738268,"about_ca_topic_score_gemma":0.0010534072,"teacher_disagreement_score":0.0018738268,"about_ca_system_score_codex":0.00030610853,"about_ca_system_score_gemma":0.00030720458,"threshold_uncertainty_score":0.0037258863},"labels":[],"label_agreement":null},{"id":"W2025335753","doi":"10.3139/217.1643","title":"Three-dimensional Filling and Post-filling Simulation of Polymer Injection Molding","year":2001,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Molding (decorative); Compressibility; Finite element method; Conservation of mass; Energy conservation; Momentum (technical analysis); Mechanical engineering; Polymer; Process (computing); Mechanics; Blow molding; Composite material; Computer science; Structural engineering; Engineering; Physics","score_opus":0.01706774486963373,"score_gpt":0.24773579042116065,"score_spread":0.23066804555152692,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2025335753","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.78093874,0.00013061806,0.2043919,0.00020583725,0.0000616542,0.00012834553,0.00026238503,0.0007951601,0.013085341],"genre_scores_gemma":[0.9701064,0.000046390967,0.027537841,0.000021766971,0.0000040141927,0.000078743644,0.00009391963,0.000047816487,0.002063049],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999892,0.000023518889,0.0000047785215,0.000009122827,0.00004692221,0.00002366035],"domain_scores_gemma":[0.9995414,0.00028854166,0.000040163497,0.000035868943,0.00005699528,0.000037135993],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00029685916,0.00030355743,0.00039917277,0.00024976776,0.0004134115,0.0004500388,0.00048291072,0.0009142804,0.0022140616],"category_scores_gemma":[0.00073848205,0.000260417,0.00039233643,0.00017109598,0.00057259,0.00033037912,0.00035295138,0.00040654073,0.00020192236],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004527826,0.00005600287,0.0005825452,0.00002134199,0.0000060924226,0.000060177328,0.000047439942,0.99072134,0.0043359753,0.0014591468,0.0001098766,0.0025547172],"study_design_scores_gemma":[0.0000063461835,0.00001753809,0.000117735464,0.0000015584238,0.0000012041993,0.000005980405,0.0000051017532,0.9980471,0.0014948961,0.00013280282,0.00016718666,0.000002445004],"about_ca_topic_score_codex":0.003699436,"about_ca_topic_score_gemma":0.0024517728,"teacher_disagreement_score":0.003699436,"about_ca_system_score_codex":0.0004214202,"about_ca_system_score_gemma":0.0006713456,"threshold_uncertainty_score":0.007406831},"labels":[],"label_agreement":null},{"id":"W2027161371","doi":"10.1002/adv.20053","title":"A generic controller for part surface temperature on a plastic injection molding machine","year":2006,"lang":"en","type":"article","venue":"Advances in Polymer Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Setpoint; Materials science; Injection molding machine; Coolant; Mold; Molding (decorative); Mechanical engineering; Controller (irrigation); Temperature control; Composite material; Computer science; Engineering","score_opus":0.0047748880002936285,"score_gpt":0.21028780249938933,"score_spread":0.2055129144990957,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2027161371","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.050346352,0.00036122755,0.9212749,0.00011653814,0.00024881773,0.00049161643,0.00021593922,0.014494239,0.012450382],"genre_scores_gemma":[0.8872807,0.0001463001,0.10492562,0.000110479035,0.000070083115,0.00030511338,0.00014411355,0.00018383424,0.0068336884],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99969876,0.000031502936,0.00001152785,0.00008254488,0.00014334696,0.000032237953],"domain_scores_gemma":[0.9997669,0.000058349695,0.000043420074,0.000046985835,0.00006503391,0.000019383246],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00035503492,0.00079908856,0.00046050997,0.00044214516,0.00031794497,0.00042714988,0.0010774867,0.00049151166,0.0051083197],"category_scores_gemma":[0.0004827954,0.00023396911,0.00036720533,0.00015041516,0.00026110766,0.00026655564,0.00028920773,0.000555097,0.0010257917],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00070731895,0.00022524052,0.0012230959,0.0006433251,0.000099101155,0.00045324003,0.00023506733,0.094371885,0.60035545,0.006256464,0.0055079465,0.28992188],"study_design_scores_gemma":[0.00022002103,0.0006065817,0.0024823914,0.00004318248,0.000097161705,0.00042263843,0.000012815595,0.7614407,0.21126549,0.0011779445,0.022160731,0.00007038588],"about_ca_topic_score_codex":0.00083665224,"about_ca_topic_score_gemma":0.0008724781,"teacher_disagreement_score":0.0051083197,"about_ca_system_score_codex":0.0003519298,"about_ca_system_score_gemma":0.00026231533,"threshold_uncertainty_score":0.017089069},"labels":[],"label_agreement":null},{"id":"W2027487156","doi":"10.1007/s12247-011-9112-8","title":"Modeling and Optimization of a Tablet Manufacturing Line","year":2011,"lang":"en","type":"article","venue":"Journal of Pharmaceutical Innovation","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":31,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"ProSensus (Canada)","funders":"","keywords":"Tableting; Compaction; Computer science; Process variable; Process engineering; Block (permutation group theory); Process (computing); Engineering; Mathematics","score_opus":0.09690175198036786,"score_gpt":0.29835039783075507,"score_spread":0.2014486458503872,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2027487156","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.5509106,0.0011185043,0.35214227,0.0012020885,0.00016755649,0.0003916689,0.0014585855,0.0012364653,0.091372274],"genre_scores_gemma":[0.9695995,0.00027437796,0.01620058,0.000056184534,0.000018591378,0.00017241365,0.00023536144,0.00008555378,0.013357393],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99978966,0.000053169562,0.000008823561,0.000045729885,0.00005648105,0.00004611361],"domain_scores_gemma":[0.9995639,0.0002465547,0.00006256553,0.000022114502,0.00007524071,0.000029677996],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003589732,0.00079214154,0.0012402708,0.0006064678,0.00085395086,0.0017141529,0.001176292,0.0027582112,0.0073714093],"category_scores_gemma":[0.00090318214,0.00097022275,0.0011210056,0.0005772009,0.0005906398,0.00070684234,0.0005028987,0.00074655237,0.00069976284],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000016022868,0.000016149677,0.00010362704,0.000009957093,0.00000434919,0.000023800578,0.000004641731,0.9983563,0.0003791841,0.00036257406,0.00006572158,0.0006577589],"study_design_scores_gemma":[0.000005232701,0.000011939418,0.00006128214,0.0000010753164,0.000003017641,0.0000025136217,0.0000026416217,0.999603,0.00014676739,0.000060626313,0.0001000296,0.0000018950738],"about_ca_topic_score_codex":0.0360961,"about_ca_topic_score_gemma":0.013242068,"teacher_disagreement_score":0.0360961,"about_ca_system_score_codex":0.001583265,"about_ca_system_score_gemma":0.0016028708,"threshold_uncertainty_score":0.07177198},"labels":[],"label_agreement":null},{"id":"W2032399920","doi":"10.1179/174328907x177617","title":"Real time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors","year":2007,"lang":"en","type":"article","venue":"Plastics Rubber and Composites Macromolecular Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Carleton University; McGill University","funders":"Engineering and Physical Sciences Research Council","keywords":"Materials science; Ultrasonic sensor; Injection moulding; Ultrasound; Polymer; Composite material; Instrumentation (computer programming); Bubble; Ultrasound energy; Working fluid; Acoustics; Mechanical engineering; Mechanics","score_opus":0.005715840420499685,"score_gpt":0.19076308083993132,"score_spread":0.18504724041943163,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2032399920","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8079395,0.0014544191,0.18579292,0.00009826073,0.00009617016,0.0001325945,0.00016162093,0.0028395902,0.001484867],"genre_scores_gemma":[0.92253226,0.00034361173,0.07518908,0.000045035635,0.000015877953,0.00006147651,0.00008572367,0.0000712936,0.0016556669],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9994832,0.000072825875,0.00001742974,0.00007506628,0.00029967295,0.000051824616],"domain_scores_gemma":[0.99943703,0.00020703302,0.00009066642,0.000041239433,0.00018851615,0.000035543697],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00044978684,0.00045925775,0.0003993716,0.0005383857,0.00012532699,0.00039556538,0.0004968058,0.00047753283,0.00088276074],"category_scores_gemma":[0.0010281986,0.0003007144,0.00015086001,0.0003098929,0.00037798926,0.00043959604,0.00030416696,0.0004157862,0.00022966036],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000120336415,0.00001947339,0.0005819724,0.000040373896,0.0000035931469,0.000026975706,0.00004006005,0.0005322333,0.9845206,0.00010826875,0.000059054073,0.013947027],"study_design_scores_gemma":[0.000008266489,0.00017545585,0.0016858957,0.0000035388643,0.000008057302,0.00006050064,0.000015462874,0.00997525,0.98729056,0.000029343017,0.0007353959,0.0000123660175],"about_ca_topic_score_codex":0.0005536186,"about_ca_topic_score_gemma":0.0006905694,"teacher_disagreement_score":0.00088276074,"about_ca_system_score_codex":0.00031834657,"about_ca_system_score_gemma":0.00026663265,"threshold_uncertainty_score":0.0029531717},"labels":[],"label_agreement":null},{"id":"W2032767284","doi":"10.1007/s00170-004-2191-7","title":"Feasibility study of a new rapid tooling process","year":2005,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University; National Research Council Canada; Atlantic Industries (Canada)","funders":"","keywords":"Materials science; Injection moulding; Process engineering; Metal powder; Process (computing); Shell (structure); New product development; Manufacturing engineering; Metal; Computer science; Composite material; Metallurgy; Engineering","score_opus":0.018697276238972035,"score_gpt":0.27668467519607665,"score_spread":0.2579873989571046,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2032767284","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9111522,0.0006215582,0.08139106,0.00032824333,0.00023905044,0.00075153133,0.00012995958,0.0004022352,0.0049841763],"genre_scores_gemma":[0.9471473,0.00016234689,0.050412826,0.00004791063,0.00003342061,0.0001443581,0.000076723234,0.000027830065,0.0019473062],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99921644,0.00014750625,0.00003630301,0.00011936628,0.0003901129,0.00009022536],"domain_scores_gemma":[0.9984384,0.00077499775,0.00012900667,0.00017337957,0.0003569106,0.00012720529],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0015974826,0.0003915178,0.00037276896,0.0004304044,0.0005045189,0.00061097275,0.00094026723,0.0010843612,0.0036583028],"category_scores_gemma":[0.0020791425,0.00028817312,0.00050200283,0.00020716996,0.00040749428,0.0012933316,0.0004646599,0.000544658,0.00039265535],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.002503716,0.0006594368,0.0016883917,0.0005192725,0.00003391382,0.00085262785,0.000244251,0.0033501743,0.95616615,0.0019108827,0.0003585672,0.031712543],"study_design_scores_gemma":[0.0013627149,0.027964216,0.007919987,0.000039891816,0.00018963632,0.0019126801,0.00034712927,0.035375793,0.9117511,0.0009144587,0.012120405,0.00010192446],"about_ca_topic_score_codex":0.000391309,"about_ca_topic_score_gemma":0.0004142549,"teacher_disagreement_score":0.0036583028,"about_ca_system_score_codex":0.00023382885,"about_ca_system_score_gemma":0.0010050869,"threshold_uncertainty_score":0.0122382045},"labels":[],"label_agreement":null},{"id":"W2033113210","doi":"10.1002/adv.20068","title":"Cavity pressure control during cooling in plastic injection molding","year":2006,"lang":"en","type":"article","venue":"Advances in Polymer Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Materials science; Mold; Molding (decorative); Coolant; Pressure control; Flow control (data); Mechanical engineering; Water cooling; Composite material; Computer science; Engineering","score_opus":0.00204342082024476,"score_gpt":0.19067544293566727,"score_spread":0.18863202211542252,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2033113210","genre_codex":"empirical","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.900267,0.00055384624,0.09672441,0.00007761155,0.000046189012,0.00007796177,0.000044460226,0.00054021156,0.001668318],"genre_scores_gemma":[0.99468035,0.00005937513,0.0049616685,0.000009983509,0.000007231488,0.000012693412,0.000008233886,0.0000146283755,0.00024574986],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.99978906,0.000037056347,0.0000085973215,0.00004356526,0.000088103334,0.000033623393],"domain_scores_gemma":[0.99955887,0.00020914627,0.000113597256,0.00003747837,0.000060945596,0.000020042484],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00030068058,0.00023654616,0.00023250475,0.00018906732,0.00021992002,0.00034698323,0.0003806814,0.00016503634,0.0004378759],"category_scores_gemma":[0.000730574,0.00015880768,0.00007936257,0.00010926618,0.0004425339,0.0002649424,0.00024168403,0.00032740572,0.00008399372],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00024202527,0.00004363775,0.00067931187,0.00007046159,0.0000042626293,0.0000831862,0.00011762827,0.0055732476,0.96024364,0.00037407718,0.00013391359,0.032434672],"study_design_scores_gemma":[0.000021678472,0.0003907098,0.0021906886,0.000006849758,0.000008549925,0.00007916402,0.000013816123,0.037955664,0.9579196,0.00015148084,0.0012450734,0.000016744158],"about_ca_topic_score_codex":0.0003987183,"about_ca_topic_score_gemma":0.0003203154,"teacher_disagreement_score":0.0004378759,"about_ca_system_score_codex":0.0002354499,"about_ca_system_score_gemma":0.00022372247,"threshold_uncertainty_score":0.0017083287},"labels":[],"label_agreement":null},{"id":"W2033363148","doi":"10.1115/imece2002-32660","title":"Experimental and Numerical Investigation of the Flow Behavior in a Tapered Rectangular Sprue","year":2002,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Sprue; Materials science; Viscosity; Rheology; Mold; Rheometer; Shear stress; Mechanics; Shear (geology); Molding (decorative); Composite material; Shear rate; Flow (mathematics); Finite element method; Computer simulation; Structural engineering; Engineering; Physics","score_opus":0.018786139747514377,"score_gpt":0.2010598585784002,"score_spread":0.18227371883088583,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2033363148","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9946709,0.000053537577,0.0045046113,0.00001757303,0.0000061135383,0.0000135758755,0.00005759705,0.0000730475,0.00060294714],"genre_scores_gemma":[0.9932273,0.00003882207,0.006295827,0.000004278999,0.000002075679,0.0000127733165,0.000045790493,0.000005948398,0.00036717896],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99987745,0.00001457306,0.0000075118915,0.000029899353,0.00004579208,0.000024778383],"domain_scores_gemma":[0.99937135,0.00026796715,0.000090318215,0.000118284595,0.00010081319,0.00005132678],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00032397592,0.00018315253,0.00022693818,0.00021533917,0.00023502106,0.00021282746,0.00030533175,0.0003394168,0.0009851444],"category_scores_gemma":[0.00077150605,0.000111599446,0.00013210054,0.00022159188,0.00057446276,0.00023074992,0.00020395778,0.00032027415,0.00007038449],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0005292073,0.00036620322,0.0041247834,0.00011322591,0.000010386028,0.00025464976,0.0003015013,0.06609723,0.9155537,0.0013019032,0.00016048156,0.011186786],"study_design_scores_gemma":[0.00009452853,0.0019453173,0.012688849,0.000018900279,0.000018436978,0.0001839026,0.00014388912,0.4223903,0.5608162,0.00025936772,0.0013957887,0.000044481047],"about_ca_topic_score_codex":0.0008474434,"about_ca_topic_score_gemma":0.0005896352,"teacher_disagreement_score":0.0009851444,"about_ca_system_score_codex":0.0001837278,"about_ca_system_score_gemma":0.00018480817,"threshold_uncertainty_score":0.00329566},"labels":[],"label_agreement":null},{"id":"W2034145382","doi":"10.3139/217.2267","title":"Utilizing Processing Parameters for Evaluating Polymer Viscosity during Plastication in Injection Molding","year":2009,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Materials science; Viscosity; Molding (decorative); Polymer; Injection molding machine; Pressure drop; Composite material; Work (physics); Rheology; Melt flow index; Temperature dependence of liquid viscosity; Mechanical engineering; Mechanics; Relative viscosity; Engineering; Copolymer","score_opus":0.031231655164254225,"score_gpt":0.29967599889749735,"score_spread":0.2684443437332431,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2034145382","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8661389,0.0002568025,0.13222064,0.000025748115,0.000010251196,0.000069048794,0.00006932196,0.000325766,0.00088364474],"genre_scores_gemma":[0.99299496,0.000047589965,0.006783691,0.0000030750057,8.76925e-7,0.000012404654,0.000026252663,0.000012826793,0.000118372525],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997267,0.00006364006,0.000017707009,0.000029128625,0.00014238278,0.00002031703],"domain_scores_gemma":[0.9991903,0.0004475088,0.0001701707,0.000057884467,0.00011651874,0.000017648024],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00050767575,0.00038689756,0.0002798324,0.0004987752,0.00013368222,0.00041820845,0.0003494341,0.00035184895,0.00037941837],"category_scores_gemma":[0.0021557002,0.00019280682,0.00022823298,0.00018906315,0.00022047915,0.0006269105,0.00017879221,0.00028286938,0.00011499048],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0006667192,0.00031011252,0.011893266,0.00019774397,0.000028386781,0.00010323272,0.00020543087,0.22506261,0.7046901,0.0005819803,0.00010216556,0.05615814],"study_design_scores_gemma":[0.000014615856,0.0005314115,0.003823252,0.000011028799,0.000019524166,0.00004562965,0.000030534513,0.44510007,0.549937,0.00016675581,0.00029884113,0.0000213775],"about_ca_topic_score_codex":0.0005424088,"about_ca_topic_score_gemma":0.00057524326,"teacher_disagreement_score":0.0005424088,"about_ca_system_score_codex":0.00035216406,"about_ca_system_score_gemma":0.00017837026,"threshold_uncertainty_score":0.0026848912},"labels":[],"label_agreement":null},{"id":"W2046576569","doi":"10.1179/174328905x71977","title":"Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding","year":2005,"lang":"en","type":"article","venue":"Plastics Rubber and Composites Macromolecular Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Ultrasonic sensor; Materials science; Injection moulding; Microscale chemistry; Extrusion; Insert (composites); Ultrasonic testing; Process (computing); Polymer; Composite material; Mechanical engineering; Acoustics; Computer science","score_opus":0.004616871986548534,"score_gpt":0.17824616107524513,"score_spread":0.1736292890886966,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2046576569","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9516023,0.0007350403,0.047037277,0.000033340406,0.000013125404,0.000027288621,0.000037447142,0.00022765873,0.0002865456],"genre_scores_gemma":[0.9702323,0.00036002285,0.028577147,0.000018855664,0.000007563828,0.00001854923,0.000037632486,0.000019250072,0.0007286849],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99972135,0.0000530461,0.000012601572,0.00005423729,0.00013040015,0.000028347453],"domain_scores_gemma":[0.99936587,0.00034575746,0.000143862,0.00004054317,0.00007688351,0.000027136975],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00042429834,0.00024076519,0.00030765947,0.00037858376,0.00009545933,0.00021449797,0.00026335957,0.0005638016,0.0003469801],"category_scores_gemma":[0.00094077626,0.00025332297,0.00010250481,0.00020425883,0.00046148204,0.00040195533,0.00019349284,0.00036508916,0.00009763483],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00011020804,0.000010135983,0.00092259125,0.000027231721,0.0000013538082,0.000033046934,0.000052213323,0.00018921733,0.9926509,0.000035781497,0.000010621376,0.00595672],"study_design_scores_gemma":[0.000007892459,0.00026298678,0.007198791,0.0000035766166,0.0000074002924,0.00018941633,0.000034412078,0.004726507,0.98729324,0.00003724426,0.00022963197,0.000008862],"about_ca_topic_score_codex":0.00022927858,"about_ca_topic_score_gemma":0.0003652972,"teacher_disagreement_score":0.0005638016,"about_ca_system_score_codex":0.00017238145,"about_ca_system_score_gemma":0.00011398394,"threshold_uncertainty_score":0.002243936},"labels":[],"label_agreement":null},{"id":"W2047109400","doi":"10.1002/pen.20195","title":"A temperature‐dependent adaptive controller. Part I: Controller methodology and open‐loop testing","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"National Research Council Canada; National Science Council","keywords":"Setpoint; Materials science; Reciprocating motion; Mold; Controller (irrigation); Open-loop controller; Mechanics; Molding (decorative); Temperature control; Composite material; Control theory (sociology); Mechanical engineering; Closed loop; Computer science; Control engineering; Engineering","score_opus":0.052707136639280866,"score_gpt":0.2527751335647015,"score_spread":0.20006799692542063,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2047109400","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.02683624,0.00017606895,0.9686432,0.0000480731,0.000043848602,0.00026122227,0.00001873071,0.0005963884,0.0033762855],"genre_scores_gemma":[0.8339908,0.00012804483,0.16127878,0.000050278777,0.000017782766,0.00047645395,0.00004846357,0.00007435855,0.003935034],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99945396,0.000118112985,0.000031881034,0.00010106122,0.0002652931,0.000029603756],"domain_scores_gemma":[0.99912435,0.00039789875,0.00009555674,0.00011241288,0.00024273497,0.000027144935],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010050663,0.0004464028,0.00028298324,0.00038541053,0.00026106808,0.00058912707,0.00080072694,0.00050125644,0.003107884],"category_scores_gemma":[0.0017153551,0.0002237498,0.0002643888,0.00014852984,0.00073613564,0.00053431175,0.00041781354,0.0006995268,0.00038294736],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00051226385,0.0005201458,0.0013330806,0.00073250843,0.00012293119,0.00026442454,0.0004903765,0.21830557,0.39958936,0.020062944,0.0010219739,0.3570445],"study_design_scores_gemma":[0.00008141324,0.000937636,0.00087111833,0.00003666228,0.000022435837,0.0001086967,0.000030326726,0.8737268,0.117446944,0.0032202222,0.0034834663,0.000034232206],"about_ca_topic_score_codex":0.0010787417,"about_ca_topic_score_gemma":0.00058045064,"teacher_disagreement_score":0.003107884,"about_ca_system_score_codex":0.00042219245,"about_ca_system_score_gemma":0.00044883383,"threshold_uncertainty_score":0.010396898},"labels":[],"label_agreement":null},{"id":"W2048136617","doi":"10.4028/www.scientific.net/ssp.141-143.9","title":"Theory and Technology of Semisolid Metal Molding","year":2008,"lang":"en","type":"article","venue":"Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Husky Injection Molding Systems (Canada)","funders":"","keywords":"Molding (decorative); Thixotropy; Materials science; Raw material; Extrusion; Extrusion moulding; Slurry; Metal injection molding; Metallurgy; Liquidus; Die casting; Casting; Composite material; Alloy; Sintering; Chemistry","score_opus":0.0316215806700688,"score_gpt":0.2667972591085303,"score_spread":0.2351756784384615,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2048136617","genre_codex":"methods","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"review","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0134614855,0.056464422,0.6581244,0.0030793964,0.002164544,0.00017568868,0.00050723844,0.0006816135,0.26534125],"genre_scores_gemma":[0.4975436,0.072781414,0.26858172,0.001848399,0.002961808,0.00096214947,0.0007357471,0.00034943386,0.15423569],"study_design_codex":"theoretical_or_conceptual","study_design_gemma":"not_applicable","domain_scores_codex":[0.99960643,0.000068849506,0.000022514694,0.00008839937,0.00017027909,0.000043490225],"domain_scores_gemma":[0.99971133,0.00010474305,0.00003747862,0.00006209171,0.00006393881,0.00002037384],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00040014068,0.0006103427,0.0007009716,0.0012041607,0.0005514073,0.0019867793,0.0011123398,0.0013067444,0.0070516686],"category_scores_gemma":[0.0006273076,0.00053737086,0.00070161826,0.00078303163,0.0027720674,0.0018351269,0.00096214795,0.0018913382,0.0023680956],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000009230713,0.00001086837,0.000059155293,0.00016421216,0.000004878036,0.0000665545,0.000070336464,0.0063975547,0.0017909067,0.9754754,0.0020633526,0.013887682],"study_design_scores_gemma":[0.000015689679,0.00007141649,0.0002201663,0.00012938528,0.000005637085,0.00033288318,0.000030033803,0.039274383,0.0021711346,0.8117594,0.14595717,0.000032749344],"about_ca_topic_score_codex":0.0007705553,"about_ca_topic_score_gemma":0.00044946256,"teacher_disagreement_score":0.0070516686,"about_ca_system_score_codex":0.0014950586,"about_ca_system_score_gemma":0.00085507164,"threshold_uncertainty_score":0.023590207},"labels":[],"label_agreement":null},{"id":"W2048876684","doi":"10.3139/217.1695","title":"Three-dimensional Numerical Modeling of Co-injection Molding","year":2002,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":10,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Core (optical fiber); Isothermal process; Molding (decorative); Work (physics); Finite element method; Polymer; Mechanics; Composite material; Newtonian fluid; Flow (mathematics); Mechanical engineering; Thermodynamics; Physics; Engineering","score_opus":0.028465529365655134,"score_gpt":0.2468312405571754,"score_spread":0.21836571119152026,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2048876684","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.2736971,0.00019312165,0.69950575,0.00024571645,0.00011018388,0.00014523856,0.0002565857,0.0012971547,0.024549136],"genre_scores_gemma":[0.9159313,0.00011616833,0.07719362,0.000042162992,0.000010446678,0.00015920284,0.00012211733,0.00009283571,0.0063322023],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99981636,0.00003140539,0.000008570262,0.000023544984,0.000093026,0.00002699322],"domain_scores_gemma":[0.9996848,0.00013631322,0.0000407364,0.000041613246,0.000070249516,0.000026345],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026781406,0.00044114824,0.00039011563,0.00035387403,0.00039970834,0.0007629458,0.0006984819,0.0009213651,0.0027216065],"category_scores_gemma":[0.0007478736,0.00027974276,0.00041006712,0.0002392608,0.0007798066,0.00039665555,0.0004784352,0.00046884708,0.00042428094],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000027544937,0.000028173472,0.00039027896,0.00001801038,0.000005279451,0.00007246654,0.0000410256,0.9847193,0.007941508,0.0032567694,0.00014165424,0.0033579222],"study_design_scores_gemma":[0.0000033730823,0.0000058492788,0.000056379224,0.0000014036715,9.838283e-7,0.000007471466,0.0000031918744,0.9977198,0.0017488921,0.00013681134,0.0003136123,0.0000021487247],"about_ca_topic_score_codex":0.0042098532,"about_ca_topic_score_gemma":0.0023892883,"teacher_disagreement_score":0.0042098532,"about_ca_system_score_codex":0.0005965454,"about_ca_system_score_gemma":0.00083500275,"threshold_uncertainty_score":0.009104669},"labels":[],"label_agreement":null},{"id":"W2050466255","doi":"10.1007/bf03016993","title":"A compressed air technique for monitoring block injection pressures","year":2006,"lang":"en","type":"article","venue":"Canadian Journal of Anesthesia/Journal canadien d anesthésie","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"","keywords":"Compressed air; Block (permutation group theory); Environmental science; Mathematics; Engineering; Mechanical engineering","score_opus":0.010251458584318494,"score_gpt":0.20184145740382411,"score_spread":0.1915899988195056,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2050466255","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8568564,0.014640104,0.107764356,0.0016171507,0.0015032481,0.00136658,0.001386339,0.0022674375,0.01259834],"genre_scores_gemma":[0.9276741,0.0033371157,0.063546784,0.0008592867,0.00041834702,0.00038057193,0.0001948939,0.00015558951,0.0034333237],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99867564,0.00023783605,0.000091295035,0.0001805359,0.00073944574,0.000075156204],"domain_scores_gemma":[0.9974843,0.0012852616,0.00029940094,0.00017505724,0.00048724096,0.00026859788],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008074647,0.0006090237,0.0004336431,0.0014788059,0.00065572193,0.0005160307,0.00050435396,0.00086618034,0.0016068867],"category_scores_gemma":[0.0035155239,0.00026986483,0.00027639602,0.0006959109,0.00072628434,0.00076421624,0.00038458197,0.0010541676,0.00028164766],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0100493,0.0005343048,0.0421685,0.0009942302,0.00017450124,0.003067706,0.0010319612,0.0003652873,0.5978681,0.0010409749,0.004653697,0.3380516],"study_design_scores_gemma":[0.0011932146,0.013986152,0.20733365,0.00037681198,0.00088420406,0.05369025,0.00038231764,0.014192477,0.67268217,0.00053264375,0.034419138,0.00032699146],"about_ca_topic_score_codex":0.0026186074,"about_ca_topic_score_gemma":0.0042203045,"teacher_disagreement_score":0.0026186074,"about_ca_system_score_codex":0.00040578342,"about_ca_system_score_gemma":0.0011036703,"threshold_uncertainty_score":0.005375564},"labels":[],"label_agreement":null},{"id":"W2054106700","doi":"10.1016/j.jmatprotec.2007.10.066","title":"Fabrication of metal matrix composites by metal injection molding—A review","year":2007,"lang":"en","type":"article","venue":"Journal of Materials Processing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":181,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Western University","funders":"","keywords":"Fabrication; Materials science; Molding (decorative); Composite number; Composite material; Metal injection molding; Metal matrix composite; Matrix (chemical analysis); Metal; Metallurgy; Sintering","score_opus":0.010320495521400998,"score_gpt":0.2596951543436318,"score_spread":0.24937465882223078,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2054106700","genre_codex":"review","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"review","genre_consensus":"review","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.012392292,0.96713936,0.014316337,0.00021164813,0.00030608554,0.000048715898,0.000040080515,0.00009031491,0.005455142],"genre_scores_gemma":[0.03547455,0.93829983,0.018606026,0.00023223979,0.000334155,0.00007112962,0.000121445024,0.000047681944,0.006812846],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.9997259,0.000022301194,0.000038759892,0.00008091116,0.00011158075,0.000020601956],"domain_scores_gemma":[0.9996351,0.00017032602,0.0000655499,0.000023160193,0.00008855151,0.000017321521],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00059854524,0.0007280951,0.0011033618,0.0011894432,0.00034453592,0.00080029556,0.0009888719,0.00077786844,0.001180724],"category_scores_gemma":[0.0004578769,0.00049778586,0.00040047878,0.0012244105,0.00035026326,0.0012878377,0.00031567397,0.00066915946,0.0011774461],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0001461058,0.00034671792,0.00047410117,0.011058576,0.00010898368,0.0003686649,0.00014804631,0.0013469091,0.211648,0.0034875877,0.0030170844,0.7678492],"study_design_scores_gemma":[0.000046188004,0.00089794456,0.0016825225,0.00084607996,0.00027098967,0.0030147256,0.0001408838,0.0020923312,0.4844129,0.0013561693,0.5051722,0.000067001565],"about_ca_topic_score_codex":0.0003880467,"about_ca_topic_score_gemma":0.00075474114,"teacher_disagreement_score":0.0011894432,"about_ca_system_score_codex":0.00030559208,"about_ca_system_score_gemma":0.00048746596,"threshold_uncertainty_score":0.00394994},"labels":[],"label_agreement":null},{"id":"W2055278028","doi":"10.6000/1929-5995.2013.02.01.1","title":"The Use of an In-Situ Measurement to Probe the Solidification Kinetics of Injection-Molded HDPE/PP Blends","year":2013,"lang":"en","type":"article","venue":"Journal of Research Updates in Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"Anhui Provincial Department of Education; Anhui University; National Natural Science Foundation of China","keywords":"Materials science; High-density polyethylene; Molding (decorative); Kinetics; Blow molding; Crystallization; In situ; Composite material; Polymer; Thermodynamics; Polyethylene; Mold","score_opus":0.10163105761339634,"score_gpt":0.3290202372098127,"score_spread":0.22738917959641636,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2055278028","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.94603896,0.00061014807,0.05039736,0.00006143476,0.000059468686,0.000063011954,0.00035665426,0.00021097457,0.00220207],"genre_scores_gemma":[0.9844487,0.0005423361,0.013250443,0.000035375346,0.000018085817,0.00004531869,0.00013145541,0.00005431562,0.001473937],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998429,0.000020109992,0.000009449772,0.000057121757,0.000048994516,0.000021456417],"domain_scores_gemma":[0.9997243,0.00012062931,0.000056630317,0.00003356701,0.000048942147,0.000015826352],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00024985944,0.00042372898,0.00022122628,0.00022403261,0.00020123697,0.00037242495,0.00025237314,0.00029886773,0.00086390704],"category_scores_gemma":[0.00037032814,0.00022378475,0.000139122,0.00020441295,0.00035786183,0.00045436877,0.00013899272,0.00069903035,0.00014880074],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00002419366,0.000010787762,0.00016732117,0.000012929793,0.0000017220876,0.000008744082,0.000015887348,0.000047601832,0.99907863,0.000032033764,0.0000075863613,0.0005926619],"study_design_scores_gemma":[9.965798e-7,0.00001787221,0.00055334804,6.2741395e-7,0.0000028719064,0.000009902594,0.000005185202,0.0005574477,0.9987161,0.000006756538,0.00012772041,0.0000012722551],"about_ca_topic_score_codex":0.00054744876,"about_ca_topic_score_gemma":0.00078080414,"teacher_disagreement_score":0.00086390704,"about_ca_system_score_codex":0.00026696714,"about_ca_system_score_gemma":0.00016706405,"threshold_uncertainty_score":0.0028900504},"labels":[],"label_agreement":null},{"id":"W2057808611","doi":"10.1002/pen.10988","title":"Metal injection molding: 3D modeling of nonisothermal filling","year":2002,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":29,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Mechanics; Rotational symmetry; Inertia; Flow (mathematics); Finite element method; Transfer molding; Diaphragm (acoustics); Free surface; Mold; Composite material; Molding (decorative); Thermodynamics; Classical mechanics; Physics","score_opus":0.01815929018792513,"score_gpt":0.19141641673414936,"score_spread":0.17325712654622422,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2057808611","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.49119243,0.00018293136,0.48820135,0.0002456278,0.000053226213,0.00013114937,0.00046088075,0.0017972151,0.017735131],"genre_scores_gemma":[0.9642536,0.00011012182,0.032547884,0.00003451835,0.00000777755,0.00013408491,0.00012882995,0.00012959767,0.002653579],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99988806,0.000024356294,0.0000050774474,0.000014672366,0.000046571353,0.000021179307],"domain_scores_gemma":[0.99975103,0.00013608662,0.000032762422,0.000032181117,0.000032760923,0.000015098501],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00025873902,0.00038635172,0.00041521818,0.0003271249,0.00034872425,0.00083974673,0.0007807252,0.0009847846,0.0018733889],"category_scores_gemma":[0.0006958774,0.00042780695,0.0006075236,0.0002266402,0.0007765072,0.00042788632,0.00036859806,0.00039022832,0.0003027127],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000018856015,0.000016908665,0.00033488896,0.000011122811,0.0000037340772,0.000040644558,0.000035850884,0.99326587,0.0029588884,0.001574702,0.00006985858,0.0016687528],"study_design_scores_gemma":[0.000003963134,0.0000047061944,0.00007736272,0.0000010702997,0.0000010831,0.00000522088,0.0000026631697,0.998705,0.0008577179,0.00015768633,0.0001811787,0.0000022493261],"about_ca_topic_score_codex":0.0071386173,"about_ca_topic_score_gemma":0.003569315,"teacher_disagreement_score":0.0071386173,"about_ca_system_score_codex":0.0007113344,"about_ca_system_score_gemma":0.00082285586,"threshold_uncertainty_score":0.014194131},"labels":[],"label_agreement":null},{"id":"W2066244481","doi":"10.4028/www.scientific.net/amr.409.763","title":"Interparticle Liquid Film Formation during Spark Plasma Sintering of Inconel 718 Superalloy","year":2011,"lang":"en","type":"article","venue":"Advanced materials research","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"","keywords":"Inconel; Materials science; Superalloy; Spark plasma sintering; Metallurgy; Sintering; Microstructure; Powder metallurgy; Particle (ecology); Liquid phase; Near net shape; Machining; Alloy","score_opus":0.07193246726881689,"score_gpt":0.29134195950514596,"score_spread":0.21940949223632908,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2066244481","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9988906,0.00017510552,0.00041903503,0.000006657399,0.0000026742732,0.0000053381177,0.000029784052,0.000017815153,0.00045309766],"genre_scores_gemma":[0.9985102,0.000116591444,0.0004991172,0.000003920876,0.0000013801953,0.000005581263,0.00009243853,0.000012433361,0.00075820705],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998541,0.000010994968,0.000011184784,0.000026056296,0.00006453898,0.000033194137],"domain_scores_gemma":[0.99990714,0.000020552134,0.000025739706,0.000009115111,0.000026262223,0.000011183233],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00014082761,0.0001876111,0.00026138112,0.0002931651,0.00021940796,0.00025929665,0.00022342424,0.00018958541,0.0008197086],"category_scores_gemma":[0.00020828983,0.00019632337,0.000193011,0.00024949573,0.00024918787,0.00029740646,0.00017298837,0.00021605506,0.00015297372],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000072866824,0.000007444546,0.00032427208,0.00003850248,0.0000037704679,0.00015644134,0.000094852534,0.00015581003,0.9977028,0.000056975794,0.000017879463,0.0013684073],"study_design_scores_gemma":[0.000004682317,0.00011684245,0.0030329667,0.0000028226016,0.000005407776,0.00007081947,0.00004840632,0.00082110596,0.9954391,0.000012454032,0.00044247363,0.0000028323898],"about_ca_topic_score_codex":0.001645737,"about_ca_topic_score_gemma":0.0031579277,"teacher_disagreement_score":0.001645737,"about_ca_system_score_codex":0.0002255464,"about_ca_system_score_gemma":0.0001747195,"threshold_uncertainty_score":0.0032723546},"labels":[],"label_agreement":null},{"id":"W2066886122","doi":"10.1002/pen.10718","title":"Melting and densification of thermoplastic powders","year":2001,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":71,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University; Queen's University","funders":"","keywords":"Materials science; Coalescence (physics); Surface tension; Shrinkage; Thermoplastic; Viscosity; Composite material; Polymer; Melting point; Particle (ecology); Dissolution; Thermodynamics; Chemical engineering","score_opus":0.008103773758132937,"score_gpt":0.18559314652395612,"score_spread":0.1774893727658232,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2066886122","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99477947,0.000532223,0.0038241367,0.000009374064,0.0000049162345,0.000010706038,0.00007430605,0.00004010492,0.0007247765],"genre_scores_gemma":[0.9976821,0.00017960757,0.0012474181,0.000005776725,0.0000025220163,0.000007415227,0.00009967014,0.000011845115,0.00076368934],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99982196,0.000015813548,0.000011244466,0.000044297652,0.00007871384,0.000028108203],"domain_scores_gemma":[0.9998204,0.00006496325,0.000047360227,0.000021043888,0.00003059819,0.00001567573],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022433444,0.00015646082,0.00028534568,0.00030686706,0.00013659566,0.00023959205,0.00015421933,0.00012769159,0.0013783987],"category_scores_gemma":[0.00047484817,0.00016103506,0.00022936058,0.00018874256,0.000306908,0.00033080555,0.00021103672,0.00035464403,0.00020091009],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00012385655,0.000016750144,0.0005270054,0.000038136517,0.000004678873,0.000048006106,0.000064770145,0.00061713386,0.9947336,0.00016488925,0.00001212091,0.003649188],"study_design_scores_gemma":[0.0000052737246,0.00013565957,0.002729888,0.0000034985044,0.0000047915614,0.00004142749,0.00001410341,0.0034194589,0.9932909,0.000039983923,0.00031241705,0.0000026254115],"about_ca_topic_score_codex":0.00052829756,"about_ca_topic_score_gemma":0.0004573216,"teacher_disagreement_score":0.0013783987,"about_ca_system_score_codex":0.0002728894,"about_ca_system_score_gemma":0.00011116493,"threshold_uncertainty_score":0.004611194},"labels":[],"label_agreement":null},{"id":"W2068297950","doi":"10.3139/217.1864","title":"Design Sensitivity Analysis for the Optimization of the Injection Molding Process","year":2005,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; National Research Council Canada","funders":"","keywords":"Sensitivity (control systems); Mold; Finite element method; Molding (decorative); Materials science; Isothermal process; Process (computing); Transfer molding; Mechanical engineering; Injection molding machine; Work (physics); Mechanics; Composite material; Computer science; Engineering; Structural engineering; Thermodynamics","score_opus":0.020899045772219974,"score_gpt":0.2530714667453964,"score_spread":0.23217242097317642,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2068297950","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0858025,0.000384656,0.90793425,0.00017106961,0.000031543215,0.00014734695,0.000083000436,0.00036523363,0.0050803707],"genre_scores_gemma":[0.9444089,0.00017116728,0.05344132,0.000043818465,0.000012203044,0.00018423542,0.00006375568,0.000070824,0.0016038154],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9990125,0.0004884281,0.000022557027,0.000080028745,0.00032697734,0.00006956408],"domain_scores_gemma":[0.9952833,0.004165065,0.00014863898,0.00009578402,0.00028291636,0.000024207578],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0028276544,0.0009212457,0.0007046037,0.0009430745,0.0002677109,0.0006874101,0.0003513666,0.00076270953,0.002132842],"category_scores_gemma":[0.005494799,0.00051210925,0.0012173987,0.0003169523,0.00060104055,0.00040618007,0.00053224835,0.000674027,0.00017664708],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000034965244,0.000017024131,0.00020506106,0.000044832766,0.000024712721,0.000018622004,0.000018088578,0.98984957,0.0028997215,0.0019041373,0.00006977284,0.0049134884],"study_design_scores_gemma":[0.000003826653,0.000027290449,0.00012703947,0.000003823968,0.000007714233,0.000004860812,0.0000026039352,0.99758387,0.0015041331,0.00056228077,0.00016814545,0.00000437379],"about_ca_topic_score_codex":0.0031685533,"about_ca_topic_score_gemma":0.0011139076,"teacher_disagreement_score":0.0031685533,"about_ca_system_score_codex":0.0009838023,"about_ca_system_score_gemma":0.00077199034,"threshold_uncertainty_score":0.014954269},"labels":[],"label_agreement":null},{"id":"W206881674","doi":"10.1023/a:1006737210909","title":"A statistical analysis of the factors affecting thermal debinding in powder injection molded parts","year":2000,"lang":"en","type":"article","venue":"Journal of Materials Science Letters","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Toronto","funders":"","keywords":"Materials science; Mineralogy; Chemistry","score_opus":0.01233189248719649,"score_gpt":0.22834264062512658,"score_spread":0.2160107481379301,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W206881674","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98372847,0.00025723502,0.015159819,0.000019563575,0.000013191883,0.00004359909,0.000270056,0.00011196783,0.00039612994],"genre_scores_gemma":[0.9975454,0.000044398003,0.0018653215,0.000005254541,0.000008415283,0.000024608933,0.00028463907,0.000020059688,0.00020182181],"study_design_codex":"observational","study_design_gemma":"observational","domain_scores_codex":[0.9971884,0.00069864764,0.00036222747,0.00053676096,0.0009878068,0.00022611501],"domain_scores_gemma":[0.9262654,0.060897835,0.0054606833,0.0026101035,0.00420345,0.000562518],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.004961294,0.00038290906,0.0007575845,0.0021219754,0.00049008155,0.0008912944,0.0005228656,0.00042350567,0.0016983488],"category_scores_gemma":[0.017406171,0.00028514524,0.0012145165,0.0024434635,0.0009703171,0.00069294934,0.00032052954,0.0007030536,0.00040059467],"study_design_candidate":"observational","study_design_consensus":"observational","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0110919,0.0010577467,0.6147546,0.00042118476,0.0012128125,0.0005854278,0.00041978926,0.014676947,0.22497968,0.000984479,0.00040918821,0.1294062],"study_design_scores_gemma":[0.000030511026,0.0029312482,0.92513686,0.000012422076,0.00050604186,0.0005875412,0.00029532917,0.031625457,0.03783239,0.00042167,0.0005561911,0.00006447589],"about_ca_topic_score_codex":0.0010177129,"about_ca_topic_score_gemma":0.0010816611,"teacher_disagreement_score":0.004961294,"about_ca_system_score_codex":0.00046768412,"about_ca_system_score_gemma":0.0007450219,"threshold_uncertainty_score":0.026238143},"labels":[],"label_agreement":null},{"id":"W2069615458","doi":"10.2316/journal.201.2008.2.201-1682","title":"A NEW METHOD FOR MONITORING AND TUNING PLASTIC INJECTION MOLDING MACHINES","year":2008,"lang":"en","type":"article","venue":"Control and Intelligent Systems","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Support vector machine; Injection molding machine; Molding (decorative); Artificial neural network; Computer science; SIGNAL (programming language); Radial basis function; Quality (philosophy); Artificial intelligence; Engineering; Mechanical engineering; Materials science","score_opus":0.025474307563272767,"score_gpt":0.2568786522793725,"score_spread":0.23140434471609975,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2069615458","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.014207003,0.0005602567,0.981154,0.00007800404,0.00012559397,0.00006063813,0.000055712484,0.0017200066,0.0020388411],"genre_scores_gemma":[0.41446105,0.0005488895,0.5780547,0.00017154738,0.000112509726,0.00018342386,0.0001423107,0.00013880225,0.006186758],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99884146,0.000115202325,0.000050232462,0.00022039938,0.0007403482,0.00003237933],"domain_scores_gemma":[0.9992562,0.00017410156,0.00012458602,0.0001261448,0.00028562036,0.00003334058],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005518148,0.0005342598,0.00065070525,0.0010699526,0.00024185875,0.0005034303,0.0008975232,0.0006508023,0.0012475116],"category_scores_gemma":[0.0011700953,0.00033071032,0.0002840661,0.000536959,0.0003486031,0.0009552831,0.00051445275,0.0005947338,0.00047936052],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002560826,0.000082027,0.0017997645,0.0003378985,0.000053958574,0.0001287448,0.00012421583,0.010289045,0.37492034,0.0027547334,0.0016750199,0.6075782],"study_design_scores_gemma":[0.000117261676,0.00059455,0.0061468007,0.000071102724,0.00011694128,0.0012971938,0.0000605163,0.50000507,0.4467788,0.002155143,0.042464823,0.00019183397],"about_ca_topic_score_codex":0.00047591826,"about_ca_topic_score_gemma":0.0006586347,"teacher_disagreement_score":0.0012475116,"about_ca_system_score_codex":0.00034869087,"about_ca_system_score_gemma":0.0002968416,"threshold_uncertainty_score":0.004173398},"labels":[],"label_agreement":null},{"id":"W2071884348","doi":"10.1002/pen.20852","title":"Real‐time diagnosis of co‐injection molding using ultrasound","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":32,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Core (optical fiber); Mold; Molding (decorative); Composite material; Ultrasonic sensor; Compression molding; Flow (mathematics); Transfer molding; Volume (thermodynamics); Ultrasound; Acoustics; Mechanics","score_opus":0.01239342602266878,"score_gpt":0.2333673714544833,"score_spread":0.22097394543181453,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2071884348","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8243206,0.001319119,0.1718388,0.00010027382,0.00007227469,0.00007234738,0.00012820901,0.0010294984,0.0011189934],"genre_scores_gemma":[0.9649466,0.00031055268,0.03402166,0.000032183274,0.000020777718,0.000024890212,0.000043421594,0.000022040656,0.0005778093],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996921,0.000068273264,0.000010964039,0.00006986312,0.00013087699,0.000027968885],"domain_scores_gemma":[0.9991366,0.00049925386,0.00014298147,0.000041546817,0.00014919737,0.000030449164],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00043228953,0.00034244114,0.00025120546,0.0006999926,0.00008615612,0.0003509481,0.0003042009,0.00046885555,0.00051921135],"category_scores_gemma":[0.0012712894,0.0002286662,0.000105207626,0.00024047107,0.00038407106,0.00033248507,0.000267542,0.00034516913,0.00020060343],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00037144226,0.000043925676,0.006065873,0.00011308984,0.000011872738,0.0001415428,0.00013517565,0.0016132563,0.94460475,0.00022429855,0.00021336888,0.046461288],"study_design_scores_gemma":[0.00003144099,0.00026883485,0.012370702,0.000017986129,0.000034469846,0.00055433594,0.000061943734,0.083908625,0.9017044,0.00015748903,0.0008637167,0.000026071762],"about_ca_topic_score_codex":0.000408318,"about_ca_topic_score_gemma":0.0004534629,"teacher_disagreement_score":0.0006999926,"about_ca_system_score_codex":0.00027492922,"about_ca_system_score_gemma":0.0001672472,"threshold_uncertainty_score":0.0022861362},"labels":[],"label_agreement":null},{"id":"W2072348623","doi":"10.1002/pen.20707","title":"Preform shape and operating condition optimization for the stretch blow molding process","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":35,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Finite element method; Sequential quadratic programming; Robustness (evolution); Mathematical optimization; Process (computing); Parameterized complexity; Quadratic programming; Blow molding; Computer science; Materials science; Mechanical engineering; Algorithm; Mathematics; Structural engineering; Engineering; Composite material; Mold","score_opus":0.009213904355402437,"score_gpt":0.2320898117512723,"score_spread":0.22287590739586988,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2072348623","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.32357424,0.00015839857,0.67308944,0.00007444752,0.000011257357,0.00006906604,0.000052999127,0.00046640055,0.0025037737],"genre_scores_gemma":[0.92136794,0.00005470983,0.07788579,0.000009019537,0.000003386868,0.000044938493,0.000046012425,0.000047072866,0.0005411227],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997838,0.00003106687,0.000009044312,0.00003418503,0.0001252838,0.00001668475],"domain_scores_gemma":[0.99964094,0.00017147703,0.00007923639,0.000035605783,0.00006248169,0.000010223471],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00055660086,0.00040132625,0.0003167656,0.0002193726,0.00021111885,0.00027703473,0.0003490414,0.00034745078,0.00069862243],"category_scores_gemma":[0.00082222925,0.0002447566,0.00028327908,0.00012581746,0.00029432453,0.00035669288,0.00027115876,0.00035550792,0.000108528395],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000117164,0.0000692312,0.0014503418,0.000098773555,0.000012105018,0.00006417927,0.000053719355,0.8295048,0.1144234,0.001194158,0.00015857974,0.052853607],"study_design_scores_gemma":[0.000011637772,0.000089707246,0.0005322963,0.0000030143638,0.000005299821,0.000020702535,0.0000063432612,0.95941263,0.039299134,0.000320964,0.00029139972,0.0000067759765],"about_ca_topic_score_codex":0.0009969966,"about_ca_topic_score_gemma":0.0016979204,"teacher_disagreement_score":0.0009969966,"about_ca_system_score_codex":0.00041045982,"about_ca_system_score_gemma":0.0006959776,"threshold_uncertainty_score":0.0029780269},"labels":[],"label_agreement":null},{"id":"W207259310","doi":"10.5006/c2005-05386","title":"Corrosion Due to Process Instability in a Hot Lean Amine System","year":2005,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Shell (Canada)","funders":"","keywords":"Corrosion; Process (computing); Instability; Materials science; Amine gas treating; Process engineering; Metallurgy; Environmental science; Forensic engineering; Computer science; Engineering; Mechanics; Environmental engineering","score_opus":0.012325187616857055,"score_gpt":0.21961642636241388,"score_spread":0.20729123874555683,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W207259310","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9991115,0.000073167466,0.0005903441,0.0000106425105,0.000003182733,0.000004507951,0.000014822533,0.000023414694,0.00016840936],"genre_scores_gemma":[0.9992242,0.000035087603,0.00030412583,0.000007948154,0.0000022060938,0.0000019769582,0.000027285083,0.00000493999,0.00039230703],"study_design_codex":"bench_or_experimental","study_design_gemma":"observational","domain_scores_codex":[0.99969864,0.00005335041,0.00001959521,0.000044120057,0.00012746695,0.000056811583],"domain_scores_gemma":[0.9995441,0.00012140567,0.000105390194,0.00004612863,0.00014173094,0.00004136431],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00037455684,0.00019552979,0.00040651226,0.00026947918,0.00030848596,0.00035682245,0.0002410539,0.0003662289,0.0007944552],"category_scores_gemma":[0.00046629526,0.00015639474,0.00030171548,0.00018513357,0.00024418786,0.00024806283,0.00025873064,0.00033712888,0.00019308794],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00066917646,0.000050906096,0.002236816,0.000045069777,0.000017502527,0.00038180742,0.000104915765,0.0010868977,0.99256706,0.000043858614,0.000049489176,0.002746537],"study_design_scores_gemma":[0.000019472602,0.0013087526,0.007532569,0.0000033076456,0.00002914699,0.00022665401,0.000052407726,0.0066976063,0.98380405,0.00002561955,0.0002915607,0.000008806536],"about_ca_topic_score_codex":0.0014577842,"about_ca_topic_score_gemma":0.0016531652,"teacher_disagreement_score":0.0014577842,"about_ca_system_score_codex":0.0003766948,"about_ca_system_score_gemma":0.00015334583,"threshold_uncertainty_score":0.0028986335},"labels":[],"label_agreement":null},{"id":"W2083832246","doi":"10.1016/j.compositesa.2012.06.010","title":"Spring-in behavior of curved composites manufactured by Flexible Injection","year":2012,"lang":"en","type":"article","venue":"Composites Part A Applied Science and Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Distortion (music); Materials science; Molding (decorative); Composite number; Composite material; Fabrication; Repeatability; Mechanical engineering; Structural engineering; Engineering; Mathematics","score_opus":0.013518757317330309,"score_gpt":0.22111035818383093,"score_spread":0.2075916008665006,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2083832246","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99789596,0.000038352373,0.0008359256,0.00002191806,0.000010095079,0.0000038141636,0.00007353918,0.00006626228,0.0010541021],"genre_scores_gemma":[0.9981294,0.000018013823,0.00041775074,0.000008320659,0.0000018570822,0.000002614279,0.00006196037,0.000021043028,0.0013389962],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998462,0.000015732268,0.0000049394084,0.000025706175,0.00005857177,0.000048942373],"domain_scores_gemma":[0.99960107,0.00011438293,0.00009248597,0.000037631602,0.0000832845,0.00007114074],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00017996863,0.00025604988,0.00019095805,0.00038662786,0.00035586974,0.00024776475,0.0002898451,0.00041589778,0.004074009],"category_scores_gemma":[0.00035727944,0.00020218169,0.00024817354,0.00019504305,0.00043851478,0.00023124901,0.0001498114,0.00031204172,0.00043644378],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00063307374,0.000073976866,0.0009960488,0.000029676476,0.0000103623815,0.0001641917,0.00016862713,0.00430386,0.9909374,0.00024398624,0.00015848804,0.0022803503],"study_design_scores_gemma":[0.000035510187,0.0008832823,0.031787813,0.000015287256,0.000027041817,0.00012488994,0.00022482396,0.056194607,0.9093462,0.00016194221,0.0011569823,0.00004161551],"about_ca_topic_score_codex":0.0015229029,"about_ca_topic_score_gemma":0.0022779093,"teacher_disagreement_score":0.004074009,"about_ca_system_score_codex":0.00029944786,"about_ca_system_score_gemma":0.00021952136,"threshold_uncertainty_score":0.0136289},"labels":[],"label_agreement":null},{"id":"W2084303877","doi":"10.1115/msec2011-50228","title":"Optimal Sensor Location to Estimate Temperature Distribution in an Injection Mould","year":2011,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Sensitivity (control systems); Cluster analysis; Finite element method; Similarity (geometry); Artificial neural network; Wireless sensor network; Temperature measurement; Cluster (spacecraft); Distribution (mathematics); Computer science; Thermal; Biological system; Algorithm; Mathematics; Artificial intelligence; Engineering; Electronic engineering; Structural engineering; Physics; Mathematical analysis","score_opus":0.02046355786792324,"score_gpt":0.24778138743423408,"score_spread":0.22731782956631086,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2084303877","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.2133946,0.0001384948,0.7847565,0.00007110416,0.00001970879,0.000032100146,0.000041866202,0.00059091765,0.00095474697],"genre_scores_gemma":[0.9248746,0.000052541887,0.07455471,0.000013857955,0.000004202892,0.000026441448,0.000030498133,0.000027278138,0.00041602284],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9995586,0.00010285779,0.000019016019,0.00011232176,0.00017456898,0.000032533022],"domain_scores_gemma":[0.9994097,0.00026884777,0.000094053685,0.00004910971,0.00016005816,0.000018346705],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00047953028,0.0006137011,0.0005606127,0.0006027153,0.00023836936,0.00038377385,0.00045775884,0.0005776613,0.00052453985],"category_scores_gemma":[0.0021278893,0.0003788977,0.00027265146,0.00022831743,0.00037151697,0.0008139469,0.00032146412,0.00032842986,0.00020927822],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00036525255,0.00008343959,0.004342036,0.00010776353,0.00003778655,0.00007940726,0.00010993457,0.77229387,0.15495068,0.0012970188,0.00027228807,0.06606051],"study_design_scores_gemma":[0.0000065765275,0.000051076466,0.0010329693,0.000005465955,0.000007176008,0.000018743647,0.000015906222,0.9659918,0.032354854,0.00036280314,0.00014257409,0.000010033842],"about_ca_topic_score_codex":0.0017093893,"about_ca_topic_score_gemma":0.0021652284,"teacher_disagreement_score":0.0017093893,"about_ca_system_score_codex":0.00050664437,"about_ca_system_score_gemma":0.00055298075,"threshold_uncertainty_score":0.0036759377},"labels":[],"label_agreement":null},{"id":"W2086966016","doi":"10.1177/0095244314538439","title":"Characterization of the injection molding process of passive vibration isolators","year":2014,"lang":"en","type":"article","venue":"Journal of Elastomers & Plastics","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Curing (chemistry); Molding (decorative); Stiffness; Natural rubber; Vibration isolation; Elastomer; Mechanical engineering; Vibration; Composite material; Computer science; Engineering; Acoustics","score_opus":0.004328860996645901,"score_gpt":0.18702538496131735,"score_spread":0.18269652396467145,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2086966016","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9761202,0.0003447838,0.022099288,0.000015088545,0.000012910755,0.000067895715,0.00017231637,0.00010519604,0.001062337],"genre_scores_gemma":[0.991026,0.00016678161,0.008005177,0.0000071434533,0.0000042375013,0.000032340264,0.00011670001,0.000039944414,0.0006017141],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997043,0.00003227975,0.000021885193,0.00005912689,0.00014846053,0.000033872082],"domain_scores_gemma":[0.99919266,0.00033389102,0.0001944837,0.00010617356,0.00015069194,0.00002206063],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004044593,0.00023925648,0.00021199428,0.00033295358,0.00019166581,0.0002798044,0.00022854001,0.00023761691,0.0005477885],"category_scores_gemma":[0.001015763,0.0001391041,0.00019914893,0.00028504277,0.00027999334,0.00021179003,0.00010508641,0.00025068986,0.0001654635],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006300903,0.000043865068,0.001858817,0.00008815799,0.0000034645248,0.00007643603,0.0001320914,0.0030098523,0.9873022,0.000113069684,0.00002721071,0.0072819847],"study_design_scores_gemma":[0.0000039393735,0.00041874187,0.009770856,0.0000073501437,0.000009357845,0.000078650766,0.000052538806,0.009647105,0.9792085,0.00003331055,0.0007620364,0.000007652451],"about_ca_topic_score_codex":0.00042252924,"about_ca_topic_score_gemma":0.0005488419,"teacher_disagreement_score":0.0005477885,"about_ca_system_score_codex":0.00015439665,"about_ca_system_score_gemma":0.00016193413,"threshold_uncertainty_score":0.002139032},"labels":[],"label_agreement":null},{"id":"W2091818944","doi":"10.1002/pen.22143","title":"Morphology development in the gate region of microinjection‐molded thermoplastics","year":2011,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University; National Research Council Canada; McGill University; Micromolding Solutions (Canada)","funders":"","keywords":"Polyoxymethylene; Materials science; Polarized light microscopy; Differential scanning calorimetry; Composite material; Molding (decorative); Microinjection; Optical microscope; Scanning electron microscope; Morphology (biology); Polyethylene; Shear (geology); Polymer; Optics","score_opus":0.02388762957434593,"score_gpt":0.18858970705196296,"score_spread":0.16470207747761703,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2091818944","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99720544,0.00013437867,0.0017464167,0.000005874515,0.0000066692473,0.0000071173413,0.000043786844,0.000036840618,0.00081351266],"genre_scores_gemma":[0.997924,0.000074489064,0.0010822968,0.000005466406,0.0000014563428,0.0000049819964,0.00004910751,0.000013904694,0.00084432005],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999708,0.0000014980544,0.0000012120167,0.00000764514,0.00001150039,0.000007404251],"domain_scores_gemma":[0.99990594,0.000021528302,0.000030624713,0.000013016994,0.000013075395,0.000015742859],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000034357592,0.00010602218,0.00007478202,0.00013037176,0.000086299195,0.00016247127,0.00008350719,0.00011093462,0.0005369994],"category_scores_gemma":[0.00009693304,0.00011296778,0.00008686103,0.00008166436,0.00017694412,0.00012832301,0.00008447366,0.00016466646,0.000100818164],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001727619,0.0000042999736,0.00020116012,0.00000567208,0.0000010018836,0.00005009631,0.000021775139,0.00008000819,0.9986558,0.00005406195,0.0000085529055,0.0009004227],"study_design_scores_gemma":[0.0000036028468,0.000076231,0.008034365,0.00000197522,0.0000033803906,0.00010723243,0.000016963219,0.00072854373,0.9904082,0.000021404167,0.00059572805,0.0000023447235],"about_ca_topic_score_codex":0.00029399304,"about_ca_topic_score_gemma":0.00047158796,"teacher_disagreement_score":0.0005369994,"about_ca_system_score_codex":0.00013042995,"about_ca_system_score_gemma":0.00007163387,"threshold_uncertainty_score":0.001796484},"labels":[],"label_agreement":null},{"id":"W2092220344","doi":"10.1109/ccece.2012.6334974","title":"A new concept to reject perturbations in a TMP process due to raw materials properties variation","year":2012,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Centre de Recherche Industrielle du Québec","funders":"","keywords":"Raw material; Process engineering; Variation (astronomy); Process (computing); Process variation; Computer science; Quality (philosophy); Process control; Refining (metallurgy); Product (mathematics); Environmental science; Manufacturing engineering; Materials science; Engineering; Mathematics","score_opus":0.019724573683340914,"score_gpt":0.23213179052185676,"score_spread":0.21240721683851585,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2092220344","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.047706153,0.0017011141,0.94015855,0.00044418324,0.00056215044,0.00023556616,0.000059997656,0.0011838116,0.007948451],"genre_scores_gemma":[0.48330483,0.001703498,0.500855,0.0007798996,0.0005085705,0.0005343953,0.0001323586,0.00019406564,0.011987359],"study_design_codex":"bench_or_experimental","study_design_gemma":"theoretical_or_conceptual","domain_scores_codex":[0.99939454,0.00004887335,0.000035466204,0.00020446428,0.0002661894,0.000050424853],"domain_scores_gemma":[0.9995534,0.00009416109,0.00011938319,0.00009058977,0.00010049536,0.000041999545],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005993564,0.00071220536,0.0007311364,0.0006517662,0.00046156123,0.0010696388,0.0013913355,0.0010383199,0.0015126963],"category_scores_gemma":[0.0005012586,0.0003827868,0.00065930287,0.00029158432,0.0011256883,0.0020489993,0.00096073264,0.0013464463,0.0006530691],"study_design_candidate":"theoretical_or_conceptual","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013342028,0.0001673055,0.00019358644,0.00022076156,0.00002135775,0.00014258863,0.00011099741,0.0017797193,0.9085875,0.027743133,0.00048258508,0.060416967],"study_design_scores_gemma":[0.000108094384,0.0022528626,0.0012311665,0.000044855587,0.00010342226,0.0015620056,0.000070355265,0.07165781,0.86025184,0.011873477,0.05072776,0.0001163532],"about_ca_topic_score_codex":0.00012722633,"about_ca_topic_score_gemma":0.00010321988,"teacher_disagreement_score":0.0015126963,"about_ca_system_score_codex":0.00030674363,"about_ca_system_score_gemma":0.0005414183,"threshold_uncertainty_score":0.005060494},"labels":[],"label_agreement":null},{"id":"W2095204883","doi":"10.1115/detc2006-99379","title":"A Multi-Agent System for Distributed, Internet Enabled Cutter/Workpiece Engagement Extractions","year":2006,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Distributed computing; Computer science; Computation; Scheduling (production processes); Overhead (engineering); Process (computing); The Internet; Multi-agent system; Engineering; Artificial intelligence; Algorithm; Operating system","score_opus":0.027080964505609848,"score_gpt":0.23015793853242875,"score_spread":0.2030769740268189,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2095204883","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.015426628,0.0002889381,0.9745282,0.00022874768,0.00010733884,0.00027031885,0.000051396397,0.0035037652,0.0055946778],"genre_scores_gemma":[0.37552074,0.00041468703,0.6134587,0.0001353772,0.000076663826,0.0005997083,0.00019260752,0.00014392754,0.009457664],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9995403,0.00013374533,0.000045122204,0.00008086467,0.00015769394,0.000042346244],"domain_scores_gemma":[0.9996197,0.00010879666,0.000044670975,0.00006245344,0.000097246724,0.00006705882],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00068623293,0.00035414184,0.00048809042,0.00036669933,0.0008746964,0.0012911009,0.0013367229,0.00097469595,0.003200245],"category_scores_gemma":[0.00092296343,0.00026008004,0.00034450062,0.00028906163,0.00043044525,0.00096744165,0.0010867831,0.00082108466,0.00082466914],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00069603836,0.0006888668,0.002372572,0.0005220457,0.00019047759,0.0019246979,0.0008102831,0.36895463,0.09609366,0.10117381,0.0142704025,0.41230246],"study_design_scores_gemma":[0.00012671911,0.00021644782,0.000401482,0.000025379424,0.000045505778,0.00023303568,0.00005734667,0.9406161,0.01189785,0.0062620714,0.04008149,0.000036679823],"about_ca_topic_score_codex":0.0019051589,"about_ca_topic_score_gemma":0.0022051907,"teacher_disagreement_score":0.003200245,"about_ca_system_score_codex":0.00051743817,"about_ca_system_score_gemma":0.0010201888,"threshold_uncertainty_score":0.010705829},"labels":[],"label_agreement":null},{"id":"W2102302523","doi":"10.1002/pen.11015","title":"Residual thermal stresses in injection moldings of thermoplastics: A theoretical and experimental study","year":2002,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":80,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"","keywords":"Materials science; Composite material; Residual stress; Viscoelasticity; Molding (decorative); Shrinkage; Stress (linguistics); Polystyrene; Creep; Finite element method; Thermal; Polymer; Structural engineering; Thermodynamics","score_opus":0.00816533247933371,"score_gpt":0.2045208762849441,"score_spread":0.19635554380561038,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2102302523","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9881918,0.00052239746,0.010010294,0.00002079949,0.000008754152,0.000021740258,0.00004051456,0.00012248415,0.0010612764],"genre_scores_gemma":[0.9975865,0.0002510837,0.0017635527,0.0000028911047,0.0000045896795,0.000010573275,0.00004591245,0.0000105827285,0.00032423026],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997689,0.000024920242,0.000008829674,0.000026096099,0.00014900388,0.00002233033],"domain_scores_gemma":[0.99952865,0.00021651281,0.000086760076,0.00006872993,0.000080209116,0.00001925241],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00041156728,0.00039774092,0.00022890574,0.00032333843,0.00022855352,0.0002254948,0.00040815846,0.00033676767,0.0008177138],"category_scores_gemma":[0.000774651,0.00022034234,0.00019689418,0.00020186076,0.0007885194,0.00038004483,0.00013498697,0.0003045314,0.0001767893],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002400202,0.00028663524,0.002337949,0.00014851223,0.000008379726,0.00015853312,0.00027731108,0.023227101,0.9549732,0.0011140978,0.000093314644,0.01713502],"study_design_scores_gemma":[0.000034192024,0.0010609954,0.005729033,0.000022114547,0.000018451865,0.00013545317,0.0000571475,0.08179235,0.90980357,0.000270853,0.0010575047,0.000018490495],"about_ca_topic_score_codex":0.0005148258,"about_ca_topic_score_gemma":0.00038812292,"teacher_disagreement_score":0.0008177138,"about_ca_system_score_codex":0.00028214353,"about_ca_system_score_gemma":0.00013449424,"threshold_uncertainty_score":0.0027355552},"labels":[],"label_agreement":null},{"id":"W2104285703","doi":"10.1002/fld.2125","title":"Finite element and sensitivity analysis of thermally induced flow instabilities","year":2009,"lang":"en","type":"article","venue":"International Journal for Numerical Methods in Fluids","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada; Government of Canada","keywords":"Sensitivity (control systems); Flow (mathematics); Mechanics; Finite element method; Dimensionless quantity; Viscosity; Materials science; Newtonian fluid; Mathematics; Thermodynamics; Physics; Engineering","score_opus":0.040359636343282754,"score_gpt":0.3668954429416421,"score_spread":0.32653580659835935,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2104285703","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.19151773,0.00020496118,0.80237645,0.00019573543,0.000046901296,0.00015872618,0.00009312078,0.00043486225,0.00497151],"genre_scores_gemma":[0.88974243,0.00008230254,0.10784817,0.000040523035,0.000011481044,0.000174783,0.00007483883,0.00006785736,0.0019576943],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9994313,0.00026422285,0.000022517039,0.00005202703,0.00019059793,0.00003928832],"domain_scores_gemma":[0.9969446,0.0023871544,0.00017064535,0.00013286628,0.0003138792,0.000050829858],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0016662134,0.0005736117,0.00061623874,0.00095671084,0.00039024543,0.0006212913,0.00057330343,0.0010566924,0.0017115086],"category_scores_gemma":[0.004010518,0.000449133,0.0008287565,0.0003210332,0.0009906589,0.00034575173,0.00067629485,0.0007464176,0.00018992646],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000026952206,0.00003034682,0.00040742732,0.000021367992,0.000014172385,0.000025183292,0.000027793363,0.9892643,0.0039962493,0.0029420666,0.000058622245,0.0031854738],"study_design_scores_gemma":[0.0000011441788,0.000004952249,0.00003512992,0.0000015385834,7.572057e-7,0.000002299678,0.0000013409401,0.99923265,0.0004887259,0.00018640028,0.00004344317,0.0000015171515],"about_ca_topic_score_codex":0.0033139815,"about_ca_topic_score_gemma":0.0012677532,"teacher_disagreement_score":0.0033139815,"about_ca_system_score_codex":0.0006819896,"about_ca_system_score_gemma":0.0006406405,"threshold_uncertainty_score":0.008811891},"labels":[],"label_agreement":null},{"id":"W2104579473","doi":"10.1106/37hu-lnpj-mc6c-ynrn","title":"Three Dimensional Filling Analysis of Gas-Assisted Injection Molding","year":2001,"lang":"en","type":"article","venue":"Journal of Reinforced Plastics and Composites","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Finite element method; Molding (decorative); Polymer; Finite volume method; Shell (structure); Flow (mathematics); Core (optical fiber); Composite material; Tracking (education); Volume (thermodynamics); Mold; Mechanics; Mechanical engineering; Thermodynamics; Structural engineering; Engineering","score_opus":0.012878146192122068,"score_gpt":0.2058544884053999,"score_spread":0.19297634221327783,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2104579473","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.40672866,0.00022334873,0.58135355,0.00011213685,0.000038976585,0.000052221185,0.000100322584,0.00062827585,0.010762478],"genre_scores_gemma":[0.97166574,0.000093053226,0.025486067,0.000018750672,0.0000042528404,0.00003127499,0.000045961217,0.000052065683,0.0026026962],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999174,0.000013645256,0.0000029374487,0.000008613691,0.00004685597,0.000010484075],"domain_scores_gemma":[0.9998703,0.000055680775,0.000018966952,0.000013263691,0.000033351338,0.000008432941],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016348793,0.00025236135,0.0002513248,0.00023711857,0.00022296928,0.0005214921,0.00028716054,0.0005535962,0.0010010097],"category_scores_gemma":[0.00040462648,0.00019098281,0.00032323395,0.000102684055,0.00044634982,0.00028911151,0.00024244103,0.00018605308,0.00016365045],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00005023084,0.000037792903,0.0012411065,0.000039854916,0.000008299957,0.00015395385,0.00012178891,0.9290094,0.046420604,0.009302296,0.0002417571,0.013372924],"study_design_scores_gemma":[0.0000015145927,0.000008683123,0.00020855464,0.0000017756947,0.0000013749446,0.000016015703,0.0000060410102,0.9943303,0.0046505644,0.00037512352,0.0003961597,0.0000038745807],"about_ca_topic_score_codex":0.0019866829,"about_ca_topic_score_gemma":0.0010651402,"teacher_disagreement_score":0.0019866829,"about_ca_system_score_codex":0.00033376113,"about_ca_system_score_gemma":0.00047736897,"threshold_uncertainty_score":0.003950238},"labels":[],"label_agreement":null},{"id":"W2109507330","doi":"10.1109/ias.1997.626283","title":"Electrostatic lubrication of moulds","year":2002,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Cégep de Sorel-Tracy; Western University","funders":"","keywords":"Lubrication; Materials science; Lubricant; Powder metallurgy; Powder coating; Metallurgy; Composite material; Coating; Injection moulding; Microstructure","score_opus":0.012967867830296883,"score_gpt":0.16048079300794332,"score_spread":0.14751292517764644,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2109507330","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.76016736,0.0036324828,0.22431545,0.00026699385,0.0002781096,0.0002565973,0.0002288747,0.0032782273,0.007575894],"genre_scores_gemma":[0.94604486,0.00058124174,0.04562561,0.00007747562,0.00003429897,0.00003719349,0.00019484466,0.00014861472,0.007256008],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9994973,0.00003382879,0.000026197664,0.00006469883,0.00032853262,0.000049404574],"domain_scores_gemma":[0.9997135,0.0000571343,0.00004657894,0.000054115033,0.00010168074,0.000026961192],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00032722813,0.00038666284,0.00064469525,0.0004679051,0.00039469337,0.0004152354,0.0007304988,0.00036998285,0.0022925504],"category_scores_gemma":[0.0008886403,0.00021071301,0.0003024816,0.00025840866,0.00040799705,0.00051384995,0.00059523486,0.00034487227,0.00048309282],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0001302634,0.00002461519,0.00046401806,0.00021915275,0.000007802689,0.00010913371,0.00006809785,0.000877203,0.9505261,0.0009858719,0.00046395455,0.046123624],"study_design_scores_gemma":[0.000031411157,0.0003796465,0.0017712482,0.000011429632,0.000011082089,0.00056514394,0.000014989604,0.00787675,0.9760359,0.0001975096,0.013088221,0.000016658683],"about_ca_topic_score_codex":0.0005606028,"about_ca_topic_score_gemma":0.0007671981,"teacher_disagreement_score":0.0022925504,"about_ca_system_score_codex":0.00045046586,"about_ca_system_score_gemma":0.00027783064,"threshold_uncertainty_score":0.0076693296},"labels":[],"label_agreement":null},{"id":"W2111637554","doi":"10.3139/217.1013","title":"A New Scheme for Controlling Part Cooling in Injection Molding","year":2007,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Setpoint; Coolant; Materials science; Temperature control; Molding (decorative); Mold; Volumetric flow rate; Controller (irrigation); Flow control (data); Mechanical engineering; Flow (mathematics); Control theory (sociology); Mechanics; Computer science; Engineering; Control (management); Composite material","score_opus":0.01744777316600985,"score_gpt":0.2630806789317365,"score_spread":0.24563290576572663,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2111637554","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.05646393,0.00021883535,0.93842447,0.0000993261,0.00012094921,0.0001905464,0.000030261015,0.0012236845,0.0032279617],"genre_scores_gemma":[0.7856235,0.000118170195,0.2112349,0.000043271037,0.000027814076,0.00017264052,0.000029383375,0.000030932024,0.0027194354],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998084,0.00003122357,0.000012441739,0.000056012745,0.00007696789,0.000014994355],"domain_scores_gemma":[0.99983966,0.000043130374,0.000028331753,0.00003398355,0.000043788274,0.0000110331275],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00028252415,0.0003814324,0.00033618463,0.00027731882,0.00030507514,0.00032441915,0.0009841144,0.000300596,0.0012977633],"category_scores_gemma":[0.00039673192,0.00018946415,0.00016915491,0.0001401312,0.00037384764,0.0004162843,0.00028828415,0.00046172293,0.00021832343],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00033625413,0.00018778956,0.0007587551,0.00024729993,0.00003284678,0.000121078505,0.00021934386,0.08791226,0.5968621,0.011326418,0.0011058339,0.30089],"study_design_scores_gemma":[0.000057677564,0.0003810813,0.0007356783,0.000016761292,0.000023537696,0.000110166045,0.000007570038,0.8856272,0.10557331,0.00096374686,0.006469649,0.00003359288],"about_ca_topic_score_codex":0.0010010211,"about_ca_topic_score_gemma":0.0011477645,"teacher_disagreement_score":0.0012977633,"about_ca_system_score_codex":0.00032464255,"about_ca_system_score_gemma":0.00028604353,"threshold_uncertainty_score":0.004341483},"labels":[],"label_agreement":null},{"id":"W2117224904","doi":"10.1002/app.10450","title":"A study on weld line morphology and mechanical strength of injection molded polystyrene/poly(methyl methacrylate) blends","year":2002,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université Laval","funders":"","keywords":"Materials science; Composite material; Weld line; Ultimate tensile strength; Methyl methacrylate; Polystyrene; Poly(methyl methacrylate); Scanning electron microscope; Izod impact strength test; Polymer blend; Phase (matter); Welding; Polymer; Polymerization; Copolymer; Chemistry","score_opus":0.023980149949326728,"score_gpt":0.24756490576074894,"score_spread":0.2235847558114222,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2117224904","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9950519,0.0007246097,0.0035190668,0.000014445692,0.000008185817,0.000011806501,0.00005150183,0.000054945267,0.00056359894],"genre_scores_gemma":[0.9972996,0.0002511767,0.0017127971,0.000011606022,0.000002812045,0.000007234906,0.000057073914,0.000017338896,0.00064038154],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99989736,0.000007366225,0.0000063083144,0.000020455866,0.000055623474,0.000012777754],"domain_scores_gemma":[0.9997552,0.00003614352,0.000090335496,0.000019500272,0.00006931979,0.00002941846],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00013764111,0.00022230252,0.0001384673,0.00034254184,0.00012356685,0.00021110778,0.00014168413,0.00023864316,0.00071531016],"category_scores_gemma":[0.00025518786,0.00017425914,0.00016394579,0.0001587768,0.00013742893,0.0002530671,0.00009533888,0.00022283728,0.00016300305],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00000886798,0.000004164961,0.00024261797,0.000006963857,0.0000017834607,0.00001624049,0.00000647701,0.000044774133,0.99901617,0.000008097638,0.0000031248187,0.0006407573],"study_design_scores_gemma":[0.0000019156062,0.0001215909,0.0074756267,0.0000025528154,0.000010580399,0.00006713434,0.000015303227,0.0007721741,0.99124134,0.000008067202,0.00028053348,0.000003143783],"about_ca_topic_score_codex":0.00055407255,"about_ca_topic_score_gemma":0.00060078054,"teacher_disagreement_score":0.00071531016,"about_ca_system_score_codex":0.00014208404,"about_ca_system_score_gemma":0.00006849717,"threshold_uncertainty_score":0.0023929477},"labels":[],"label_agreement":null},{"id":"W2122693417","doi":"10.1002/pen.20196","title":"A temperature‐dependent adaptive controller. Part II: Design and implementation","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"National Research Council Canada; National Science Council","keywords":"Setpoint; Temperature control; Controller (irrigation); Mold; Materials science; Control theory (sociology); Tracking (education); Process (computing); PID controller; Open-loop controller; Atmospheric temperature range; Mechanical engineering; Computer science; Control engineering; Control (management); Engineering; Closed loop; Composite material; Thermodynamics; Physics","score_opus":0.011478334481948843,"score_gpt":0.21477031827236603,"score_spread":0.20329198379041719,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2122693417","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.007803953,0.00020013377,0.9784067,0.00009200891,0.00010333914,0.0003557143,0.00006419986,0.0046082335,0.008365783],"genre_scores_gemma":[0.593761,0.0002928743,0.38651457,0.00027118754,0.00010311903,0.001243135,0.00023396985,0.00033273333,0.017247349],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99972767,0.000029185767,0.000016263282,0.00008284633,0.00012085287,0.000023228215],"domain_scores_gemma":[0.9997459,0.000052646534,0.000022891903,0.000043579294,0.000120509685,0.0000144847845],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003570181,0.00050396327,0.0003306485,0.00036799838,0.00032066493,0.00078882906,0.0012765628,0.0007412417,0.0062615564],"category_scores_gemma":[0.0006519194,0.0002915001,0.0002592628,0.0001855225,0.00032857584,0.0003964911,0.00030362487,0.0006760036,0.002096614],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0003345689,0.00026532082,0.0013871219,0.0005272581,0.00010997436,0.00027064412,0.00029163755,0.1358228,0.20132059,0.014322017,0.007131635,0.63821644],"study_design_scores_gemma":[0.00013252567,0.00041704637,0.0011458464,0.00005206799,0.00004562792,0.0002834955,0.000019966677,0.8674794,0.0990731,0.0016825716,0.02962564,0.00004272332],"about_ca_topic_score_codex":0.0016857304,"about_ca_topic_score_gemma":0.0010726802,"teacher_disagreement_score":0.0062615564,"about_ca_system_score_codex":0.0003883629,"about_ca_system_score_gemma":0.00050374906,"threshold_uncertainty_score":0.02094698},"labels":[],"label_agreement":null},{"id":"W2125308992","doi":"10.1002/adv.20193","title":"Helical flow of polymer melts in extruders, part II: Model simulation and validation","year":2010,"lang":"en","type":"article","venue":"Advances in Polymer Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Toronto Metropolitan University","funders":"","keywords":"Materials science; Polymer; Molding (decorative); Polyethylene; Work (physics); Injection molding machine; Melt flow index; Flow (mathematics); Mechanics; Volumetric flow rate; Polyethylene terephthalate; Computer simulation; Mechanical engineering; Computer science; Composite material; Simulation; Copolymer; Engineering","score_opus":0.008609137238025045,"score_gpt":0.2522427281208944,"score_spread":0.24363359088286934,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2125308992","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9292081,0.00019550962,0.0661827,0.000084799205,0.000020521351,0.00017795089,0.0003596123,0.00029849948,0.0034723023],"genre_scores_gemma":[0.98513675,0.00013858893,0.013497645,0.000010133095,0.0000037367768,0.00012928928,0.00016976209,0.000018359255,0.0008957294],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998523,0.000045926372,0.0000120122095,0.000020126872,0.00004459282,0.000024987554],"domain_scores_gemma":[0.9993813,0.0003612332,0.00006437437,0.00008665716,0.00008746084,0.000019038882],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00072993967,0.0003966251,0.0006807337,0.00037553077,0.00038619537,0.0005454568,0.00053186214,0.0007509563,0.00093673967],"category_scores_gemma":[0.0012194646,0.00024882366,0.00044941652,0.00029582676,0.0004708495,0.00033777664,0.00037971055,0.00052962155,0.00015955689],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006568822,0.00008337351,0.0010777359,0.000045065597,0.000009530088,0.00004820036,0.00003966805,0.98775566,0.0072015417,0.0011425227,0.000050307543,0.002480773],"study_design_scores_gemma":[0.000015959755,0.00007411609,0.00029993925,0.0000039019337,0.0000029295484,0.0000058537157,0.000009034286,0.99331,0.006035039,0.00010727096,0.00013245917,0.0000035454673],"about_ca_topic_score_codex":0.0038969747,"about_ca_topic_score_gemma":0.0014513189,"teacher_disagreement_score":0.0038969747,"about_ca_system_score_codex":0.0005055826,"about_ca_system_score_gemma":0.00060023856,"threshold_uncertainty_score":0.007748604},"labels":[],"label_agreement":null},{"id":"W2129161072","doi":"10.4028/www.scientific.net/amm.275-277.2161","title":"The Viscosity Model of Ti-6Al-4V Feedstocks in Metal Powder Injection Molding","year":2013,"lang":"en","type":"article","venue":"Applied Mechanics and Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"","keywords":"Metal injection molding; Molding (decorative); Materials science; Viscosity; Raw material; Metal powder; Composite material; Field (mathematics); Metal; Metallurgy; Mechanical engineering; Engineering; Mathematics; Chemistry","score_opus":0.010564460522000047,"score_gpt":0.18328859153414737,"score_spread":0.17272413101214731,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2129161072","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.284033,0.0021229426,0.660249,0.0006997919,0.00020182795,0.00018677165,0.0006797871,0.001070442,0.050756425],"genre_scores_gemma":[0.95929444,0.0010241619,0.015831618,0.000055628232,0.000024902223,0.00012658362,0.00031664848,0.00009133732,0.023234691],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999833,0.000017863724,0.000008860516,0.00003691343,0.00008101828,0.000022379221],"domain_scores_gemma":[0.99994457,0.000015395013,0.000010476663,0.000005325207,0.000021048832,0.0000031383772],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016173924,0.00041993562,0.00036919556,0.0004269014,0.00026999376,0.00054978015,0.0008402826,0.0007677075,0.0011643337],"category_scores_gemma":[0.00034230095,0.00028172822,0.0006445389,0.0003837305,0.00028275076,0.0008317525,0.00019908477,0.00042665013,0.00035663813],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008400813,0.00007334297,0.0009884615,0.0001728967,0.000018381754,0.0002326025,0.00011989541,0.8653593,0.09559261,0.018154342,0.0007468176,0.018457426],"study_design_scores_gemma":[0.0000056802464,0.000031385956,0.0003265477,0.0000042959105,0.0000058898895,0.000033073346,0.000007752302,0.98777884,0.009812421,0.0008665808,0.0011196928,0.000007828751],"about_ca_topic_score_codex":0.007904247,"about_ca_topic_score_gemma":0.003121146,"teacher_disagreement_score":0.007904247,"about_ca_system_score_codex":0.0006455975,"about_ca_system_score_gemma":0.0006307266,"threshold_uncertainty_score":0.015716493},"labels":[],"label_agreement":null},{"id":"W2137098870","doi":"10.1109/icma.2005.1626673","title":"Cavity temperature control in plastic injection molding","year":2006,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Setpoint; Coolant; Injection molding machine; Molding (decorative); Mold; Temperature control; Materials science; Mechanical engineering; Controller (irrigation); Water cooling; Engineering; Composite material; Computer science","score_opus":0.003261641262720253,"score_gpt":0.166053860662242,"score_spread":0.16279221939952176,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2137098870","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.26491612,0.0015973193,0.722475,0.00014965901,0.0001408845,0.000072195144,0.000032168136,0.001440575,0.009176062],"genre_scores_gemma":[0.9683735,0.0002652613,0.029318128,0.00001663142,0.000019061983,0.000019095041,0.000009883295,0.000034621,0.0019438837],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99988174,0.00001913419,0.0000036381593,0.000024626022,0.000056852397,0.000013906792],"domain_scores_gemma":[0.99991155,0.000037559377,0.000017071525,0.000010239042,0.000018778892,0.000004717887],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016928189,0.00020144391,0.00022575381,0.000103012004,0.00013644439,0.00026335655,0.00031231792,0.00016501335,0.000675839],"category_scores_gemma":[0.00032284716,0.00013361353,0.00012311908,0.00008667734,0.0002957952,0.0002399695,0.00017334602,0.00025943117,0.0001387582],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00024315207,0.00007063169,0.0005510976,0.00014157515,0.000017292132,0.00013242231,0.00012868553,0.173165,0.6775124,0.00657838,0.0005763478,0.14088304],"study_design_scores_gemma":[0.000052116757,0.0004070044,0.0012432961,0.000011812578,0.00001824896,0.00011016118,0.00001389162,0.7411597,0.24871677,0.0016828639,0.0065534157,0.000030748095],"about_ca_topic_score_codex":0.0006449909,"about_ca_topic_score_gemma":0.00062993355,"teacher_disagreement_score":0.000675839,"about_ca_system_score_codex":0.00022780252,"about_ca_system_score_gemma":0.00016142,"threshold_uncertainty_score":0.0022608638},"labels":[],"label_agreement":null},{"id":"W2139829580","doi":"10.1109/ultsym.1997.663136","title":"Advances in on-line monitoring of polymer injection molding process","year":2002,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"","keywords":"Materials science; Shrinkage; Ultrasonic sensor; Molding (decorative); Composite material; Rod; Weld line; Polymer; Transducer; Flow (mathematics); Process (computing); Acoustics; Welding; Mechanics; Computer science","score_opus":0.02816182446448302,"score_gpt":0.25895292627565375,"score_spread":0.23079110181117074,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2139829580","genre_codex":"methods","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"review","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.42100978,0.0114713805,0.5438447,0.00074513536,0.00036104437,0.0003694477,0.00056814065,0.0033531378,0.018277273],"genre_scores_gemma":[0.6771881,0.006478192,0.30416867,0.00026868368,0.0003024215,0.00022851149,0.00063579134,0.0002761566,0.010453527],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.9981364,0.0004896365,0.000075262986,0.0003207546,0.00089138706,0.00008655779],"domain_scores_gemma":[0.99673456,0.0009808389,0.00048750083,0.00051017833,0.0011855927,0.00010125001],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0014392191,0.0008169984,0.0005933979,0.0011428925,0.00019845593,0.0009470129,0.0016434995,0.00086020783,0.002163428],"category_scores_gemma":[0.0020215674,0.00035040584,0.0002475737,0.0006694873,0.000284362,0.0011551996,0.0005539955,0.00081402564,0.0008964083],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00028636036,0.00038175116,0.005658473,0.00041427577,0.000026682263,0.00010156922,0.00018663846,0.001175595,0.7768135,0.0008457784,0.0009843765,0.213125],"study_design_scores_gemma":[0.000030382946,0.000627219,0.007209336,0.00005341234,0.00006799953,0.00069938245,0.000058778798,0.021003747,0.9517242,0.0002787507,0.01819559,0.000051311505],"about_ca_topic_score_codex":0.0005979354,"about_ca_topic_score_gemma":0.00075629266,"teacher_disagreement_score":0.002163428,"about_ca_system_score_codex":0.00044851928,"about_ca_system_score_gemma":0.00033325242,"threshold_uncertainty_score":0.007611394},"labels":[],"label_agreement":null},{"id":"W2150862675","doi":"10.1109/tepm.2006.874964","title":"Effects of Fluid Properties on Dispensing Processes for Electronics Packaging","year":2006,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":54,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Materials science; Electronics; Electronic packaging; Printed circuit board; Coating; Epoxy; Surface tension; Adhesive; Integrated circuit packaging; Process engineering; Composite material; Mechanical engineering; Integrated circuit; Engineering; Electrical engineering; Optoelectronics","score_opus":0.007399130290290004,"score_gpt":0.19097440743631625,"score_spread":0.18357527714602623,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2150862675","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.93976325,0.007553413,0.04815988,0.00024128772,0.00027766882,0.00025186088,0.00022157733,0.00038401264,0.0031469401],"genre_scores_gemma":[0.97357357,0.0028401588,0.02169305,0.00015666016,0.00008354443,0.000079883495,0.0001412362,0.00012781037,0.0013040799],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99861634,0.00025838974,0.00013847431,0.00017057358,0.0007201909,0.00009601931],"domain_scores_gemma":[0.99641466,0.002256438,0.0006386836,0.0001555973,0.00042882175,0.00010577745],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008811975,0.0007076798,0.00047581983,0.0005583668,0.00042673943,0.00085541763,0.00041157808,0.0005909647,0.000978227],"category_scores_gemma":[0.0050341,0.00033026733,0.00032801903,0.00045004758,0.0004041681,0.0011607242,0.00052439485,0.0006459939,0.00039930348],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00020156411,0.00004228734,0.00021479298,0.00012540621,0.000006650249,0.00009920221,0.000091697984,0.0002333075,0.9898705,0.000067466724,0.000035411973,0.009011858],"study_design_scores_gemma":[0.0000047535823,0.00016465396,0.00039071936,0.000004374389,0.000009703736,0.00004784074,0.000019083252,0.0009680256,0.99783736,0.000019063626,0.0005266046,0.000007782596],"about_ca_topic_score_codex":0.00048402877,"about_ca_topic_score_gemma":0.00053482974,"teacher_disagreement_score":0.000978227,"about_ca_system_score_codex":0.00029590237,"about_ca_system_score_gemma":0.00023017619,"threshold_uncertainty_score":0.0046602488},"labels":[],"label_agreement":null},{"id":"W2152790554","doi":"10.1002/adv.21449","title":"Controlling Process Parameters during Plastication in Plastic Injection Molding Using Model Predictive Control","year":2014,"lang":"en","type":"article","venue":"Advances in Polymer Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Materials science; Injection molding machine; Multivariable calculus; Viscosity; Molding (decorative); Model predictive control; Controller (irrigation); Rotational speed; Process (computing); Control theory (sociology); Mechanical engineering; Control engineering; Computer science; Composite material; Control (management); Engineering; Artificial intelligence","score_opus":0.0055447383875193495,"score_gpt":0.22486131545319235,"score_spread":0.219316577065673,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2152790554","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.23371036,0.00038404294,0.7606986,0.00018605602,0.000049930375,0.0001205252,0.00004528687,0.0011629012,0.0036423102],"genre_scores_gemma":[0.984189,0.0000771498,0.015246578,0.000010014466,0.00000377539,0.000028963339,0.000010917424,0.000010683966,0.00042296606],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99983656,0.000034136272,0.000008579203,0.000027683416,0.00007527781,0.000017672413],"domain_scores_gemma":[0.999731,0.0001565496,0.00005391261,0.000018172832,0.000034678942,0.0000057283787],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003747529,0.00036729724,0.00025992288,0.0001915213,0.00022214699,0.00045285214,0.00034489087,0.00020983806,0.00043951435],"category_scores_gemma":[0.000742029,0.00021110475,0.00015114798,0.00013123837,0.000308989,0.00032167137,0.00019588918,0.00045738937,0.00007823194],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00021625964,0.00020648404,0.0016447774,0.00032895702,0.00003315467,0.00013692961,0.00024137874,0.5865997,0.29910648,0.0028059569,0.00044312066,0.108236834],"study_design_scores_gemma":[0.00001456117,0.00014519204,0.00047709604,0.000008120805,0.000012000926,0.000017257913,0.000012521905,0.9136449,0.08453658,0.00033290396,0.00078671577,0.000012083475],"about_ca_topic_score_codex":0.0014155485,"about_ca_topic_score_gemma":0.0016444935,"teacher_disagreement_score":0.0014155485,"about_ca_system_score_codex":0.0003011752,"about_ca_system_score_gemma":0.0003575522,"threshold_uncertainty_score":0.0028146505},"labels":[],"label_agreement":null},{"id":"W2156404620","doi":"10.1002/nme.370","title":"Three‐dimensional finite element solution of gas‐assisted injection moulding","year":2001,"lang":"en","type":"article","venue":"International Journal for Numerical Methods in Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":45,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Finite element method; Conservation of mass; Injection moulding; Compressibility; Momentum (technical analysis); Viscosity; Mechanics; Energy conservation; Mechanical engineering; Polymer; Materials science; Flow (mathematics); Thermodynamics; Engineering; Composite material; Physics","score_opus":0.04484939112372518,"score_gpt":0.3505847384550066,"score_spread":0.30573534733128144,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2156404620","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.043325085,0.00009202133,0.95131487,0.000115272764,0.000038809452,0.00008068084,0.00009400181,0.00036646606,0.004572714],"genre_scores_gemma":[0.43935838,0.00016199566,0.5515517,0.00007213621,0.000020679752,0.0004625181,0.00027262518,0.00018593894,0.007914073],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997824,0.000059332942,0.00001092403,0.000024652123,0.0000989029,0.000023797873],"domain_scores_gemma":[0.9994659,0.00032851857,0.000035894976,0.00004203253,0.00010296896,0.00002478484],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00066187844,0.0004812617,0.00064336334,0.0004429929,0.00040755115,0.00064815395,0.0008170712,0.0017776128,0.0032907783],"category_scores_gemma":[0.0014819143,0.00043946932,0.0005389225,0.000268424,0.00088415213,0.00042511412,0.0006803481,0.0007214232,0.00056752417],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000045355802,0.000034042245,0.00034745288,0.00006251971,0.000010638771,0.0000580176,0.00010888067,0.9713101,0.008767354,0.006899627,0.0003163353,0.012039665],"study_design_scores_gemma":[0.0000072018106,0.0000075249377,0.000034405854,0.000004331663,0.0000011696824,0.000008098943,0.000006986095,0.9974921,0.0013075396,0.00047765614,0.0006500179,0.0000030995936],"about_ca_topic_score_codex":0.0031753592,"about_ca_topic_score_gemma":0.002103342,"teacher_disagreement_score":0.0032907783,"about_ca_system_score_codex":0.00048033978,"about_ca_system_score_gemma":0.0010581939,"threshold_uncertainty_score":0.0110087395},"labels":[],"label_agreement":null},{"id":"W2159787959","doi":"10.1002/pc.21096","title":"Experimental study of flexible injection to manufacture parts of strong curvature","year":2011,"lang":"en","type":"article","venue":"Polymer Composites","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Thermosetting polymer; Composite material; Mold; Deformation (meteorology); Composite number; Curvature; Reinforcement; Process (computing); Computer science","score_opus":0.030675015685894952,"score_gpt":0.24074175614003337,"score_spread":0.21006674045413842,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2159787959","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99484396,0.0000993595,0.0043753427,0.000008644502,0.000008967694,0.000045830573,0.000057635207,0.000041673655,0.0005184879],"genre_scores_gemma":[0.99449676,0.00005242793,0.004844059,0.0000090905505,0.0000025003953,0.000026315598,0.00005928078,0.000015752938,0.00049377576],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9995735,0.000054365555,0.000024825315,0.00009011474,0.00016985503,0.000087349115],"domain_scores_gemma":[0.99903536,0.00030725208,0.00022840941,0.0002045975,0.00016236058,0.00006205055],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000485237,0.0004915131,0.00028850467,0.00035124703,0.00024841004,0.00018732887,0.00036844506,0.0005348195,0.0014152991],"category_scores_gemma":[0.00063483935,0.00022557481,0.00033109993,0.00033676333,0.0004778953,0.00021651619,0.00033783106,0.000390489,0.00028940965],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00014322303,0.00011194419,0.0003068861,0.000042718493,0.000005935128,0.00009990192,0.00008555461,0.00089536817,0.9967535,0.00007340324,0.000020923071,0.0014606451],"study_design_scores_gemma":[0.000019974148,0.0029696387,0.0042966045,0.0000059100485,0.00001543836,0.00008276285,0.000034830988,0.0027853537,0.98929465,0.000024906285,0.0004607652,0.000009270453],"about_ca_topic_score_codex":0.00028566743,"about_ca_topic_score_gemma":0.00034671408,"teacher_disagreement_score":0.0014152991,"about_ca_system_score_codex":0.0001944014,"about_ca_system_score_gemma":0.00012940224,"threshold_uncertainty_score":0.004734695},"labels":[],"label_agreement":null},{"id":"W2160022449","doi":"10.1002/pen.21632","title":"Characterization of the microinjection molding process","year":2010,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":40,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University; National Research Council Canada; McGill University","funders":"","keywords":"Plunger; Materials science; Polycarbonate; Injection molding machine; Polyoxymethylene; Molding (decorative); Mechanical engineering; Composite material; Process (computing); Mold; Metering mode; Computer science; Polymer; Engineering","score_opus":0.004176174053905247,"score_gpt":0.18348736747635716,"score_spread":0.17931119342245191,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2160022449","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.89448535,0.0011463253,0.10013745,0.00007027975,0.000058966616,0.0003048397,0.00059087586,0.0007014935,0.002504429],"genre_scores_gemma":[0.95990163,0.00045559197,0.03724623,0.000031957818,0.00001642464,0.00015319417,0.000395979,0.00009144518,0.0017075342],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99969804,0.000016888154,0.000021677417,0.000057680285,0.00017825518,0.00002743907],"domain_scores_gemma":[0.99919266,0.00032270973,0.0001860891,0.000097820994,0.00017276965,0.000028084056],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00037229666,0.0002473347,0.0002495031,0.0003613156,0.000164221,0.00026473613,0.0002434983,0.00019088377,0.0011137086],"category_scores_gemma":[0.0010723599,0.00012764728,0.00014735067,0.00030562325,0.00024372291,0.0002947755,0.0001276637,0.00029437305,0.0002622028],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000033221484,0.000020925612,0.00052692014,0.00005099077,0.0000018514371,0.00004434246,0.000044439916,0.00037947748,0.98781955,0.00013261223,0.000055771834,0.010889823],"study_design_scores_gemma":[0.00000354942,0.00014936441,0.0036691295,0.000004551221,0.0000048126985,0.00005553736,0.000009138439,0.0021210276,0.9926938,0.000030847026,0.001254171,0.0000040483415],"about_ca_topic_score_codex":0.0003424248,"about_ca_topic_score_gemma":0.00040496202,"teacher_disagreement_score":0.0011137086,"about_ca_system_score_codex":0.00022499527,"about_ca_system_score_gemma":0.00033561478,"threshold_uncertainty_score":0.0037257671},"labels":[],"label_agreement":null},{"id":"W2165136139","doi":"10.1109/6104.895075","title":"Modeling of time-pressure fluid dispensing processes","year":2000,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":62,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Fluid dynamics; Fluid pressure; Process (computing); Materials science; Volumetric flow rate; Flow (mathematics); Mechanical engineering; Process engineering; Computer science; Mechanics; Engineering; Physics","score_opus":0.0075641368031247125,"score_gpt":0.19221645638250653,"score_spread":0.18465231957938183,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2165136139","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.04002736,0.00089236617,0.9343187,0.00036227395,0.00016866095,0.00022050318,0.00052842865,0.0008708594,0.022610825],"genre_scores_gemma":[0.85137117,0.0025993062,0.10101902,0.00013742718,0.000098050536,0.0010983334,0.0008182918,0.00021519556,0.04264321],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9995389,0.000060312068,0.000030770505,0.00009439213,0.00021277663,0.000062913925],"domain_scores_gemma":[0.99955493,0.00018572337,0.00008585326,0.00003433768,0.000109256136,0.000029780791],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00046718153,0.001140338,0.0011096584,0.0006226589,0.0006198062,0.0018469704,0.002311767,0.003277679,0.0032774145],"category_scores_gemma":[0.001373144,0.0005342183,0.0010469266,0.0005957979,0.00073102495,0.0014475266,0.0008166124,0.0010924288,0.00096949283],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000035031135,0.000037719477,0.00019178745,0.00007184653,0.000008209597,0.00012604518,0.000049848528,0.97916794,0.0063875853,0.010087317,0.00020038041,0.0036363516],"study_design_scores_gemma":[0.0000057973202,0.000011630205,0.00003667907,0.000002703231,0.0000024963276,0.00001647463,0.0000036627455,0.99739826,0.0009221526,0.0008625844,0.00073300727,0.0000045212178],"about_ca_topic_score_codex":0.009049506,"about_ca_topic_score_gemma":0.0025012505,"teacher_disagreement_score":0.009049506,"about_ca_system_score_codex":0.0009286591,"about_ca_system_score_gemma":0.0012638187,"threshold_uncertainty_score":0.017993689},"labels":[],"label_agreement":null},{"id":"W2167500414","doi":"10.1016/j.compositesa.2015.11.006","title":"Compression moulding of Carbon/PEEK Randomly-Oriented Strands composites: A 2D Finite Element model to predict the squeeze flow behaviour","year":2015,"lang":"en","type":"article","venue":"Composites Part A Applied Science and Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada; McGill University","keywords":"Peek; Materials science; Composite material; Thermoplastic; Finite element method; Viscosity; Yield (engineering); Composite number; Compression (physics); Flow (mathematics); Structural engineering; Mathematics; Geometry; Polymer","score_opus":0.02324834943139767,"score_gpt":0.23266153518100238,"score_spread":0.2094131857496047,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2167500414","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.94515914,0.00017907865,0.04547124,0.00011226631,0.000036017584,0.00006573388,0.00021925531,0.00033109565,0.008426083],"genre_scores_gemma":[0.99241626,0.000070530994,0.0052666,0.000012955999,0.0000035328005,0.000025935573,0.000078873236,0.00003766643,0.0020875575],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99995184,0.0000063369985,0.0000021715814,0.000008974555,0.000020985426,0.000009698238],"domain_scores_gemma":[0.99985814,0.000074647316,0.000020200197,0.000013161617,0.00001947522,0.000014403494],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016163872,0.00040400232,0.00035754166,0.0003231708,0.00031024558,0.00042242068,0.0004764441,0.0009279498,0.0019643286],"category_scores_gemma":[0.0003964068,0.00033535348,0.00032684777,0.00021256687,0.00041711674,0.00033993542,0.00019462135,0.00043440727,0.00018632523],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000072373114,0.000054831882,0.0006843346,0.00003197727,0.000006299304,0.000080073754,0.00003051944,0.9756448,0.019071475,0.0007410986,0.00009534393,0.003486826],"study_design_scores_gemma":[0.0000040805935,0.000014045977,0.00028369718,0.0000016551207,0.0000016326103,0.0000045608613,0.0000032631583,0.9972205,0.0023687505,0.00003514364,0.000060372033,0.0000022908334],"about_ca_topic_score_codex":0.0111473035,"about_ca_topic_score_gemma":0.009993855,"teacher_disagreement_score":0.0111473035,"about_ca_system_score_codex":0.00057616073,"about_ca_system_score_gemma":0.00075986714,"threshold_uncertainty_score":0.022164822},"labels":[],"label_agreement":null},{"id":"W2168594880","doi":"10.1002/pen.20887","title":"Thermal residual stress development for semi‐crystalline polymers in rotational molding","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Calgary","funders":"","keywords":"Materials science; Residual stress; Composite material; Molding (decorative); Exothermic reaction; Thermoelastic damping; Crystallization; Polymer; Endothermic process; Crystallization of polymers; Crystallinity; Stress (linguistics); Thermal; Thermodynamics; Adsorption","score_opus":0.011689130217829696,"score_gpt":0.22039967053697568,"score_spread":0.208710540319146,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2168594880","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98661464,0.0002588903,0.012268514,0.000019219775,0.000007989935,0.000009163153,0.000022980801,0.00006559001,0.0007331358],"genre_scores_gemma":[0.9986572,0.000053811065,0.0010782771,0.0000015511713,0.0000010588172,0.0000035639923,0.000012148126,0.000005707685,0.00018669099],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999151,0.000014532667,0.000003960171,0.000012641742,0.000039215418,0.000014497907],"domain_scores_gemma":[0.99983823,0.00006906034,0.000052804164,0.000016254831,0.000016975398,0.00000672315],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019670468,0.00018531832,0.00018516959,0.0001441122,0.00010174697,0.00023735926,0.0001531195,0.00015254985,0.0006719999],"category_scores_gemma":[0.00033402373,0.0001161908,0.0002071747,0.00010318258,0.0003217051,0.0001792984,0.000110222136,0.00013911245,0.000097745135],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013624132,0.000056047757,0.0015927458,0.00007887705,0.000009808131,0.00013076187,0.000071731236,0.0679391,0.920023,0.0014300597,0.0000988443,0.008432795],"study_design_scores_gemma":[0.000023553743,0.00044374124,0.0046227286,0.000008715143,0.000010437735,0.00011183045,0.000023177321,0.4746689,0.51919377,0.00035040994,0.0005283912,0.000014295866],"about_ca_topic_score_codex":0.0004808907,"about_ca_topic_score_gemma":0.00032363296,"teacher_disagreement_score":0.0006719999,"about_ca_system_score_codex":0.000251494,"about_ca_system_score_gemma":0.00015243265,"threshold_uncertainty_score":0.0022481084},"labels":[],"label_agreement":null},{"id":"W2180255397","doi":"10.1002/cjce.22394","title":"Three‐dimensional modelling and simulation of sequential co‐injection moulding with application to a toothbrush handle","year":2015,"lang":"en","type":"article","venue":"The Canadian Journal of Chemical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"National Natural Science Foundation of China","keywords":"Injection moulding; Transient (computer programming); Materials science; Flow (mathematics); Process (computing); Mechanical engineering; Mechanics; Block (permutation group theory); Computer science; Finite volume method; Level set method; Molding (decorative); Composite material; Engineering; Physics; Mathematics; Geometry","score_opus":0.021372341609864308,"score_gpt":0.20870604182297567,"score_spread":0.18733370021311135,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2180255397","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.82227445,0.0003017192,0.16272336,0.00024249159,0.00007651972,0.0001499467,0.0003907554,0.00097290636,0.012867792],"genre_scores_gemma":[0.9822677,0.00011696172,0.015229785,0.000016336064,0.0000053333874,0.00009062873,0.00012605637,0.000041563948,0.0021056032],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99991715,0.000012034592,0.000003877025,0.000012642659,0.000030536663,0.000023673698],"domain_scores_gemma":[0.9998282,0.000077448836,0.000024045672,0.000018194785,0.00002771417,0.000024266295],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021497627,0.00043226295,0.0004804078,0.00034997336,0.00045272414,0.0006749809,0.00070872554,0.0012129182,0.0018484682],"category_scores_gemma":[0.00049909216,0.00037509983,0.0006247504,0.00030886353,0.00060825853,0.0003318821,0.0003995369,0.00045201092,0.00017690228],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003433366,0.0000308723,0.0007126541,0.000020381285,0.000007359562,0.00006632247,0.00003487617,0.99126595,0.0049857334,0.00094023073,0.00009955869,0.0018017548],"study_design_scores_gemma":[0.0000046147156,0.000011448008,0.00019328539,0.0000011870256,0.0000018063112,0.000005983595,0.000005087848,0.99900526,0.00056161307,0.000061755934,0.00014577543,0.000002092219],"about_ca_topic_score_codex":0.014853898,"about_ca_topic_score_gemma":0.0063959644,"teacher_disagreement_score":0.014853898,"about_ca_system_score_codex":0.00068470655,"about_ca_system_score_gemma":0.0012992834,"threshold_uncertainty_score":0.029534876},"labels":[],"label_agreement":null},{"id":"W2186696467","doi":"10.1109/tepm.2003.820824","title":"Off-line control of time-pressure dispensing processes for electronics packaging","year":2003,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":47,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Queen's University; University of Saskatchewan","funders":"","keywords":"Electronics; Pressure control; Electronic packaging; Process control; Process (computing); Computer science; Mechanical engineering; Materials science; Engineering; Electronic engineering; Electrical engineering","score_opus":0.008518147756332566,"score_gpt":0.20862018631220194,"score_spread":0.2001020385558694,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2186696467","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.09438698,0.0006952491,0.8964481,0.00012764335,0.00015826664,0.00014282133,0.000060083734,0.001280741,0.0067002014],"genre_scores_gemma":[0.9473657,0.00039532897,0.049125656,0.00004569201,0.00003264181,0.00007330537,0.000046967012,0.000055092485,0.0028596069],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99973434,0.00003698981,0.000014142782,0.000049260827,0.00014758467,0.00001764104],"domain_scores_gemma":[0.99972945,0.00010299699,0.000069373884,0.000028200755,0.000059573602,0.0000104242445],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019656311,0.0006297904,0.0003399599,0.00015115533,0.00020875846,0.00065323815,0.0008014112,0.00041364168,0.0010879164],"category_scores_gemma":[0.00051825756,0.00018249097,0.00027460934,0.00012912982,0.00024974727,0.0004251662,0.00021561734,0.00039629836,0.00032979067],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00040635685,0.0004647411,0.0007960103,0.00057236385,0.000035742032,0.00036717305,0.00029230208,0.1646971,0.6095078,0.007694781,0.0017704898,0.21339522],"study_design_scores_gemma":[0.000022518081,0.0002876268,0.00031898168,0.000008596487,0.000013884754,0.00011764182,0.000010909863,0.89115983,0.104146026,0.00061697344,0.003281861,0.000015130328],"about_ca_topic_score_codex":0.0010019324,"about_ca_topic_score_gemma":0.0009951954,"teacher_disagreement_score":0.0010879164,"about_ca_system_score_codex":0.00029121895,"about_ca_system_score_gemma":0.00024547524,"threshold_uncertainty_score":0.0036394},"labels":[],"label_agreement":null},{"id":"W2222410142","doi":"10.1139/tcsme-2006-0026","title":"DESIGN AND VERIFICATION OF A CLAMPING SYSTEM FOR MICRO-INJECTION MOLDING MACHINE","year":2006,"lang":"en","type":"article","venue":"Transactions of the Canadian Society for Mechanical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Clamping; Injection molding machine; Molding (decorative); Automation; Mechanical engineering; Mold; Engineering; Computer science; Materials science; Composite material","score_opus":0.011537447128175692,"score_gpt":0.1816972938215504,"score_spread":0.1701598466933747,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2222410142","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.11393961,0.0007456496,0.8686864,0.00045789924,0.00047834756,0.0014094529,0.00023115023,0.006350346,0.007701221],"genre_scores_gemma":[0.7631095,0.00022473717,0.23026182,0.00014134013,0.00007220112,0.00052834273,0.0002569258,0.00016521578,0.0052399472],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9982665,0.00018208542,0.00014598874,0.0003523965,0.0009118808,0.00014111173],"domain_scores_gemma":[0.99846977,0.0002487717,0.00020587507,0.0002481114,0.0007383731,0.00008913323],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0013337701,0.0005795802,0.000592445,0.0005597275,0.0006550471,0.0008408292,0.0018556189,0.001188464,0.0031471758],"category_scores_gemma":[0.0018566683,0.00042294126,0.00041410822,0.00016249777,0.0005305032,0.00089291495,0.0005788405,0.0006595477,0.0007112829],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0006094704,0.0002308918,0.004006433,0.0010340627,0.00009226248,0.0007754723,0.000605428,0.017545257,0.7979546,0.015188692,0.0032780545,0.15867938],"study_design_scores_gemma":[0.00038101242,0.002335045,0.0053122775,0.00012741242,0.00015022678,0.00096519646,0.000081699705,0.1354326,0.8114043,0.0009765394,0.042716596,0.00011722893],"about_ca_topic_score_codex":0.001422336,"about_ca_topic_score_gemma":0.0007645695,"teacher_disagreement_score":0.0031471758,"about_ca_system_score_codex":0.0007429492,"about_ca_system_score_gemma":0.0016361901,"threshold_uncertainty_score":0.010528386},"labels":[],"label_agreement":null},{"id":"W2247921322","doi":"10.2172/1089084","title":"Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites","year":2013,"lang":"en","type":"report","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Corporation; Quarter (Canadian coin); Engineering; Engineering management; Business; Manufacturing engineering; Political science; Law; History","score_opus":0.02504230334828753,"score_gpt":0.2264584496626034,"score_spread":0.20141614631431587,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2247921322","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.04869158,0.0006394686,0.92766905,0.00016255991,0.00010188702,0.00012499922,0.00017913987,0.0038974923,0.018533744],"genre_scores_gemma":[0.7356336,0.0009461115,0.25189888,0.000033148302,0.0000352879,0.00022725154,0.0004315426,0.00056796824,0.010226237],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997749,0.000025593119,0.000008396828,0.000023206107,0.0001523191,0.000015729225],"domain_scores_gemma":[0.9995802,0.00026983977,0.00003768023,0.000030301642,0.00007234338,0.000009656783],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00052789337,0.0006767252,0.000359979,0.00056810107,0.0003049649,0.00092722545,0.0006453841,0.00037967472,0.0034676625],"category_scores_gemma":[0.001122097,0.00045876877,0.000456907,0.00026282805,0.00026307773,0.00064685213,0.0004252712,0.0007001144,0.0005572909],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00005349161,0.00009706645,0.0009062363,0.00012878557,0.000016565507,0.000106003026,0.000075705735,0.8752031,0.023258455,0.008983135,0.001259537,0.08991186],"study_design_scores_gemma":[0.0000029487105,0.000012999307,0.00009705694,0.0000062484833,0.0000025359616,0.0000071959807,0.0000071382788,0.9939319,0.004118615,0.0006574354,0.0011527792,0.0000032240875],"about_ca_topic_score_codex":0.0042510773,"about_ca_topic_score_gemma":0.0062580174,"teacher_disagreement_score":0.0042510773,"about_ca_system_score_codex":0.0004633112,"about_ca_system_score_gemma":0.0007750482,"threshold_uncertainty_score":0.011600435},"labels":[],"label_agreement":null},{"id":"W2253573193","doi":"10.1149/ma2013-02/15/1541","title":"Low Pressure Liquid Extrusion Porosimetry for Determination of Pore Size Distribution in Gas Diffusion and Microporous Layers","year":2013,"lang":"en","type":"article","venue":"ECS Meeting Abstracts","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"","keywords":"Porosimetry; Microporous material; Extrusion; Materials science; Diffusion; Porosity; Mineralogy; Composite material; Chemical engineering; Thermodynamics; Porous medium; Chemistry","score_opus":0.00623707582075539,"score_gpt":0.20470524957727373,"score_spread":0.19846817375651835,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2253573193","genre_codex":"empirical","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.780563,0.0033589432,0.20536138,0.0002754526,0.00016414319,0.00016658836,0.003109152,0.0011689593,0.0058323657],"genre_scores_gemma":[0.89833605,0.002414854,0.08994615,0.00011067817,0.000048281443,0.00022178818,0.002801337,0.0002745316,0.005846339],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997166,0.000049148646,0.000022780167,0.00006598842,0.00012170557,0.00002380979],"domain_scores_gemma":[0.9994103,0.00035906746,0.00005285737,0.0000612674,0.00008901085,0.000027459517],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005234912,0.00036893203,0.00024378706,0.00053335645,0.00024302931,0.00029272857,0.0004108752,0.0005417552,0.0036243415],"category_scores_gemma":[0.0008560597,0.00028480103,0.00018221974,0.00039264225,0.00025851463,0.0006859325,0.0001746419,0.00069344253,0.0011315595],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000056647994,0.000011108875,0.00012580593,0.000029960913,0.0000020216144,0.000013146011,0.000008414762,0.000024085179,0.9973629,0.00004625534,0.000074455704,0.0022452478],"study_design_scores_gemma":[0.0000059687636,0.00006922927,0.0017381504,0.0000034723707,0.0000058628652,0.00007002735,0.000007840219,0.0009032872,0.99609476,0.000028948058,0.001068894,0.0000035567602],"about_ca_topic_score_codex":0.00029822302,"about_ca_topic_score_gemma":0.0006110441,"teacher_disagreement_score":0.0036243415,"about_ca_system_score_codex":0.00016040305,"about_ca_system_score_gemma":0.00014572301,"threshold_uncertainty_score":0.012124658},"labels":[],"label_agreement":null},{"id":"W2309689014","doi":"","title":"Laminated Injection Mould with Conformal Cooling Channels: Optimization, Fabrication and Testing","year":2013,"lang":"en","type":"article","venue":"UWSpace (University of Waterloo)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Conformal map; Stacking; Materials science; Fabrication; Die (integrated circuit); Mechanical engineering; Sheet metal; Water cooling; Composite material; Engineering drawing; Structural engineering; Engineering; Geometry; Nanotechnology; Mathematics","score_opus":0.01031554426081298,"score_gpt":0.15550582082274023,"score_spread":0.14519027656192723,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2309689014","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9345692,0.0004996828,0.058341563,0.00007159831,0.000039681585,0.00028516623,0.00031527344,0.00060669816,0.0052712257],"genre_scores_gemma":[0.9446789,0.00019839828,0.053616814,0.0000066878883,0.00000573278,0.00013214133,0.00012503446,0.00006740879,0.0011688609],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996394,0.000034167057,0.000014902358,0.000041208346,0.00021356164,0.00005674941],"domain_scores_gemma":[0.99939287,0.0001867496,0.00014204206,0.00009087657,0.00016283743,0.000024669938],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006202509,0.00043384815,0.00044305457,0.0004349967,0.00021771727,0.00034823423,0.00043624226,0.00033684442,0.0011759547],"category_scores_gemma":[0.00091648,0.0002746649,0.00029771368,0.0004778789,0.000273789,0.00023361715,0.00015005101,0.00026670587,0.00013982007],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002976684,0.00030736675,0.004873137,0.00075142656,0.000059150596,0.00023787265,0.00018878542,0.24560808,0.69298255,0.0014978709,0.0010454002,0.052150715],"study_design_scores_gemma":[0.00008434591,0.0016042001,0.011248155,0.000034815926,0.000059607835,0.00013913255,0.00006255116,0.25818583,0.7244578,0.00019367386,0.003875116,0.00005470663],"about_ca_topic_score_codex":0.001489472,"about_ca_topic_score_gemma":0.002351232,"teacher_disagreement_score":0.001489472,"about_ca_system_score_codex":0.0005273525,"about_ca_system_score_gemma":0.00043436975,"threshold_uncertainty_score":0.0039339066},"labels":[],"label_agreement":null},{"id":"W2320252346","doi":"10.2514/6.2001-2568","title":"Three dimensional modeling and simulation of injection molding processes","year":2001,"lang":"en","type":"article","venue":"15th AIAA Computational Fluid Dynamics Conference","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Molding (decorative); Computer science; Solid modeling; Materials science; Mechanical engineering; Engineering drawing; Engineering; Artificial intelligence","score_opus":0.024668518536875066,"score_gpt":0.23768308404091099,"score_spread":0.2130145655040359,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2320252346","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.67183053,0.0009600321,0.2775228,0.0011128562,0.00030771593,0.00024262164,0.001056793,0.0020404903,0.04492607],"genre_scores_gemma":[0.9705091,0.0003672016,0.023943651,0.000085733576,0.000029012848,0.000134785,0.000307251,0.00014858822,0.0044746394],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99975604,0.000054740107,0.000012611435,0.000022591454,0.000107527296,0.000046471905],"domain_scores_gemma":[0.9994661,0.00025980975,0.00006794725,0.0000576839,0.00007647883,0.00007199562],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00031386202,0.0006603537,0.0009328062,0.00050080824,0.0008036003,0.0016390277,0.0012769853,0.001914101,0.0028227577],"category_scores_gemma":[0.0012436167,0.0008393339,0.0007371025,0.00058129744,0.00093970256,0.0009830742,0.00085263944,0.0010745283,0.00039636865],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000023587681,0.000033681823,0.00025067,0.000010938391,0.0000061691317,0.000035952995,0.00001894702,0.9957455,0.0011291206,0.0016335852,0.00010352592,0.0010083517],"study_design_scores_gemma":[0.000006951047,0.0000063362536,0.00009070826,0.0000010799149,0.0000016129541,0.0000043359673,0.000003670879,0.9989365,0.00042209777,0.00033088698,0.00019232409,0.0000035842295],"about_ca_topic_score_codex":0.015014536,"about_ca_topic_score_gemma":0.008687809,"teacher_disagreement_score":0.015014536,"about_ca_system_score_codex":0.00095939584,"about_ca_system_score_gemma":0.0013026288,"threshold_uncertainty_score":0.029854298},"labels":[],"label_agreement":null},{"id":"W2330055048","doi":"10.1063/1.4942342","title":"Production of micron-sized polymer particles for additive manufacturing by melt emulsification","year":2016,"lang":"en","type":"article","venue":"AIP conference proceedings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Institute of Particle Physics","funders":"","keywords":"Materials science; Polymer; Breakup; Composite material; Scanning electron microscope; Surface tension; Ultimate tensile strength; Extrusion; Phase (matter); Chemistry","score_opus":0.018071726830769814,"score_gpt":0.21820034131998634,"score_spread":0.2001286144892165,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2330055048","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7677631,0.0045415564,0.21413319,0.00016366216,0.0002942802,0.00043405092,0.0011731429,0.0015817279,0.00991534],"genre_scores_gemma":[0.807476,0.0024936441,0.18310581,0.00006650957,0.00004131887,0.0001974487,0.00089194695,0.00035271212,0.005374693],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998098,0.000010594587,0.000016472059,0.00004853177,0.00009277404,0.000021968306],"domain_scores_gemma":[0.9998264,0.000039262413,0.00004070717,0.00003287905,0.000036163958,0.000024698438],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002164683,0.00043699855,0.00046220754,0.0006085223,0.00018602311,0.00045587943,0.00027614817,0.00043313744,0.0011949508],"category_scores_gemma":[0.0002940962,0.0002792232,0.00040896333,0.00027746323,0.00017197529,0.00040175804,0.00032667365,0.00068654265,0.0011754989],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000008545273,0.000012571465,0.000039609644,0.000037629125,0.000003494747,0.000034663524,0.00000887577,0.00008312437,0.99656844,0.00014345889,0.000032995165,0.003026646],"study_design_scores_gemma":[0.0000034423094,0.00007850277,0.00027419947,0.00000355198,0.000007177017,0.00006809793,0.0000034598847,0.0005954194,0.9969879,0.00004226966,0.0019337556,0.0000023328155],"about_ca_topic_score_codex":0.000108946464,"about_ca_topic_score_gemma":0.00024506156,"teacher_disagreement_score":0.0011949508,"about_ca_system_score_codex":0.00020661211,"about_ca_system_score_gemma":0.0001531293,"threshold_uncertainty_score":0.0039975047},"labels":[],"label_agreement":null},{"id":"W2337335714","doi":"10.1080/16864360.2015.1059203","title":"Mold modification methods to fix warpage problems for plastic molding products","year":2015,"lang":"en","type":"article","venue":"Computer-Aided Design and Applications","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"","keywords":"Mold; Molding (decorative); Materials science; Composite material; Plastic packaging; Polymer science","score_opus":0.11996598153364695,"score_gpt":0.31397639569187413,"score_spread":0.19401041415822717,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2337335714","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.07625355,0.0013503815,0.90517503,0.000105291016,0.00020872707,0.00023032636,0.00006422986,0.001632037,0.014980477],"genre_scores_gemma":[0.5651803,0.0011416796,0.41331694,0.00009957114,0.00006122453,0.00017888873,0.00018720346,0.00058692455,0.019247338],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998167,0.000021638267,0.000014036997,0.000031831896,0.00009517733,0.000020500029],"domain_scores_gemma":[0.99972206,0.00009922788,0.000053012256,0.00006768354,0.000045494955,0.000012487475],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00023380165,0.0008900542,0.00049289525,0.0010050922,0.00037839796,0.0004139689,0.0007019132,0.0004219691,0.0062934374],"category_scores_gemma":[0.0009923347,0.00034347302,0.0006293839,0.0005610109,0.00040128475,0.00063834974,0.0005914095,0.0007262854,0.0009833379],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00022179625,0.0002927399,0.0012907763,0.00048521828,0.00007429328,0.00041268423,0.00026792043,0.088086516,0.15765633,0.011819323,0.0029590607,0.7364333],"study_design_scores_gemma":[0.00013037527,0.0012559352,0.0029185202,0.00014840896,0.00019992655,0.0014432857,0.00025324695,0.7084847,0.22344185,0.014616437,0.047042392,0.00006486216],"about_ca_topic_score_codex":0.00035139438,"about_ca_topic_score_gemma":0.0010507301,"teacher_disagreement_score":0.0062934374,"about_ca_system_score_codex":0.00017164534,"about_ca_system_score_gemma":0.00029279134,"threshold_uncertainty_score":0.021053672},"labels":[],"label_agreement":null},{"id":"W2350186085","doi":"","title":"Design of hot nitrogen pneumatic conveyance system for bottle-grade PET","year":2006,"lang":"en","type":"article","venue":"China Synthetic Fiber Industry","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Bottle; Nozzle; Compressed air; Nitrogen; Gas compressor; Automotive engineering; Environmental science; Materials science; Engineering; Nuclear engineering; Mechanical engineering; Chemistry","score_opus":0.018637930351497998,"score_gpt":0.20994469638871052,"score_spread":0.19130676603721253,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2350186085","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.39085802,0.0013210264,0.5871545,0.00037567472,0.00039834384,0.0012998799,0.0004873378,0.0055949353,0.012510256],"genre_scores_gemma":[0.8512914,0.00034582638,0.13636713,0.0001272751,0.0001299387,0.0005092762,0.00039311367,0.00013156419,0.010704466],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.9995085,0.00004823558,0.000030030436,0.00016641758,0.00020573733,0.000041073206],"domain_scores_gemma":[0.9996698,0.00004789437,0.00006859963,0.000034034565,0.00015345357,0.00002619364],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004466471,0.00070431404,0.00045563935,0.00042605412,0.0004864798,0.00041479745,0.0013547338,0.00046770374,0.002426285],"category_scores_gemma":[0.00041807233,0.00039209297,0.00025651243,0.0002719899,0.00025728668,0.00057749945,0.00030040118,0.00021528457,0.000520244],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00041950823,0.00008741631,0.0020784335,0.0006044284,0.00003758675,0.00034274434,0.00028879906,0.004919736,0.9087069,0.0031147585,0.0026603513,0.07673931],"study_design_scores_gemma":[0.00034917385,0.00277177,0.014188573,0.000059168997,0.00019331103,0.0020917829,0.000100535115,0.103680335,0.815072,0.0005316259,0.0607437,0.0002179615],"about_ca_topic_score_codex":0.0013141343,"about_ca_topic_score_gemma":0.0013332514,"teacher_disagreement_score":0.002426285,"about_ca_system_score_codex":0.00066404534,"about_ca_system_score_gemma":0.0007518439,"threshold_uncertainty_score":0.008116782},"labels":[],"label_agreement":null},{"id":"W2352559840","doi":"","title":"Application of Fuzzy Self-adaptive PID Control for Injection Molding Machine Cylinder Temperature Control","year":2012,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"CAE (Canada)","funders":"","keywords":"Injection molding machine; PID controller; Multivariable calculus; Control theory (sociology); Temperature control; Cylinder; Molding (decorative); Coupling (piping); Fuzzy control system; Control engineering; Control system; Computer science; Fuzzy logic; Engineering; Mold; Materials science; Mechanical engineering; Control (management); Composite material; Artificial intelligence","score_opus":0.007349804794886026,"score_gpt":0.20855901407819677,"score_spread":0.20120920928331074,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2352559840","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.06703583,0.00053096097,0.92554593,0.00012676096,0.00021406104,0.000060887083,0.000015821874,0.0011483806,0.0053213984],"genre_scores_gemma":[0.9537357,0.00018021937,0.043765526,0.000046996716,0.000035381054,0.000036052745,0.000017835899,0.00002128102,0.0021609769],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99971,0.00004826726,0.000017857641,0.000059718634,0.00014118323,0.000022816042],"domain_scores_gemma":[0.9997907,0.000055323202,0.000017803713,0.00001597145,0.00011149471,0.000008848396],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003495079,0.00026092425,0.00029257816,0.0002798999,0.00024445925,0.00036593468,0.00046932267,0.00031567758,0.0006506596],"category_scores_gemma":[0.00079248473,0.00014258704,0.00025159257,0.00018432054,0.00022985315,0.00029106077,0.00023404542,0.00026063883,0.00012576827],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0005239002,0.00017764662,0.0027016427,0.00029927926,0.00009345166,0.0004237182,0.00030674363,0.28720716,0.16920902,0.006905936,0.0024549332,0.5296966],"study_design_scores_gemma":[0.000041601284,0.0001552098,0.0011274413,0.000008063207,0.000025266889,0.000086248714,0.000013917407,0.9712412,0.024123235,0.0006735656,0.0024829598,0.00002138883],"about_ca_topic_score_codex":0.0023829637,"about_ca_topic_score_gemma":0.0014372277,"teacher_disagreement_score":0.0023829637,"about_ca_system_score_codex":0.00021494308,"about_ca_system_score_gemma":0.00030175087,"threshold_uncertainty_score":0.004738152},"labels":[],"label_agreement":null},{"id":"W2404608147","doi":"10.4028/www.scientific.net/msf.857.286","title":"Segregation Measurement of Inconel 718 Feedstocks Used in Low-Pressure Metal Injection Molding","year":2016,"lang":"en","type":"article","venue":"Materials science forum","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"","keywords":"Materials science; Wax; Paraffin wax; Molding (decorative); Composite material; Raw material; Metal injection molding; Shrinkage; Melting point; Metal powder; Metallurgy; Powder metallurgy; Thermogravimetric analysis; Metal; Sintering; Chemical engineering","score_opus":0.017413911377358274,"score_gpt":0.21535983296194205,"score_spread":0.1979459215845838,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2404608147","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9962478,0.00030175244,0.0024576914,0.0000091542215,0.000006013232,0.000021281463,0.00022901167,0.000047261394,0.0006799143],"genre_scores_gemma":[0.99267983,0.00042234312,0.0052766344,0.000011505773,0.000002025972,0.00003249405,0.00049206783,0.00004186763,0.0010412687],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996245,0.00003494271,0.000035706085,0.00008604194,0.00016787686,0.000050890194],"domain_scores_gemma":[0.99978966,0.000027636508,0.00005988582,0.0000149573125,0.00008747105,0.000020470638],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00020090932,0.0003831506,0.00031606635,0.0005346551,0.00022812549,0.00030761605,0.00024924893,0.00028770944,0.000531874],"category_scores_gemma":[0.0003334485,0.00016782692,0.00022016447,0.00076310395,0.0001634753,0.00028044803,0.00015782706,0.0003881514,0.00022876915],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004720524,0.00001098613,0.00030816786,0.000019855364,0.0000023682571,0.000019117222,0.00001543538,0.000085586056,0.9985759,0.000009828143,0.000005710911,0.00089984294],"study_design_scores_gemma":[0.000001138418,0.000059973325,0.0017635959,0.0000017056594,0.0000051484208,0.000011676349,0.000017170685,0.00030974587,0.99765515,0.0000036197353,0.00016945276,0.0000015303349],"about_ca_topic_score_codex":0.0014138833,"about_ca_topic_score_gemma":0.0030221976,"teacher_disagreement_score":0.0014138833,"about_ca_system_score_codex":0.00029376414,"about_ca_system_score_gemma":0.0001686661,"threshold_uncertainty_score":0.0028113127},"labels":[],"label_agreement":null},{"id":"W2405999279","doi":"10.1016/j.powtec.2016.05.046","title":"Improvement of flow of an iron-copper-graphite powder mix through additions of nanoparticles","year":2016,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Rio Tinto (Canada); National Research Council Canada; Université Laval","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Lubricant; Nanoparticle; Copper; Materials science; Carbon black; Graphite; Ferrous; Mixing (physics); Powder metallurgy; Chemical engineering; Metallurgy; Composite material; Sintering; Nanotechnology","score_opus":0.009832327986765874,"score_gpt":0.2137986428744658,"score_spread":0.20396631488769992,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2405999279","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9889264,0.00041535328,0.007745504,0.000079169564,0.000035495603,0.00004986776,0.00012927412,0.00032263206,0.0022961986],"genre_scores_gemma":[0.99217004,0.00017552005,0.00571452,0.000012168097,0.000010478717,0.000023170382,0.00008546402,0.000032453703,0.0017761198],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998447,0.000017698665,0.000014697833,0.000038129896,0.0000646148,0.00002020299],"domain_scores_gemma":[0.999897,0.000028420629,0.000034086577,0.0000105934,0.000017344162,0.000012505345],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026392363,0.0003037665,0.00021240581,0.00038858363,0.00020184286,0.00033273493,0.00021711361,0.00035649064,0.0012253154],"category_scores_gemma":[0.00027102357,0.00017969616,0.00023540319,0.0002469212,0.00016918556,0.0003860864,0.0001297357,0.0003640939,0.00024035946],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00015051967,0.000032080694,0.00014487005,0.000047300644,0.0000024529247,0.000028169989,0.000019802435,0.000118473254,0.9967834,0.00012807496,0.000029884222,0.0025149493],"study_design_scores_gemma":[0.0000056410645,0.000071299844,0.00040408198,0.0000018240437,0.0000037342804,0.000012149204,0.0000037742657,0.0008121886,0.9983687,0.000008881896,0.0003061173,0.000001748914],"about_ca_topic_score_codex":0.00040852692,"about_ca_topic_score_gemma":0.0007371071,"teacher_disagreement_score":0.0012253154,"about_ca_system_score_codex":0.0002197207,"about_ca_system_score_gemma":0.00023839234,"threshold_uncertainty_score":0.0040991306},"labels":[],"label_agreement":null},{"id":"W2461992771","doi":"10.1177/0021998316650273","title":"An experimental technique to characterize interply void formation in unidirectional prepregs","year":2016,"lang":"en","type":"article","venue":"Journal of Composite Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"Technische Universität München; University of Bristol; McGill University; Deutsche Forschungsgemeinschaft; Engineering and Physical Sciences Research Council; University of Southern California","keywords":"Materials science; Composite material; Void (composites); Vaporization; Contact angle; Moisture; Autoclave; Groove (engineering); Enhanced Data Rates for GSM Evolution; Contact region; Contact area; Layer (electronics)","score_opus":0.012952558160118857,"score_gpt":0.2451092769227345,"score_spread":0.23215671876261562,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2461992771","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9580618,0.0005009802,0.03964211,0.000026330292,0.000041599054,0.00011516821,0.00029664833,0.00023602738,0.0010794159],"genre_scores_gemma":[0.9615176,0.00033505057,0.036677584,0.000024504396,0.000009968412,0.00017752196,0.00019251936,0.000057017045,0.0010083043],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998147,0.000013499028,0.00001222211,0.000052639814,0.000068898735,0.0000379959],"domain_scores_gemma":[0.9995559,0.00012288426,0.00012473445,0.00009766404,0.00007839694,0.000020373605],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021474967,0.00035688656,0.00019777287,0.00028842408,0.00032121045,0.00020969826,0.00031068543,0.00038187887,0.00093390886],"category_scores_gemma":[0.0003544992,0.00020797072,0.00016149099,0.00020362472,0.00028860342,0.00029016082,0.00022378177,0.0005548111,0.0002228834],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000010947479,0.000008173269,0.00012776977,0.000024455925,6.9614447e-7,0.000021048376,0.000026517406,0.00002463749,0.99901354,0.000029289848,0.0000077659015,0.0007051341],"study_design_scores_gemma":[0.0000017513917,0.00013244717,0.001721381,0.000002031611,0.0000030145654,0.00007253154,0.000021423502,0.00035921473,0.9972101,0.000013696665,0.00046010278,0.0000023399673],"about_ca_topic_score_codex":0.00032762426,"about_ca_topic_score_gemma":0.00066332775,"teacher_disagreement_score":0.00093390886,"about_ca_system_score_codex":0.0001495609,"about_ca_system_score_gemma":0.00016797485,"threshold_uncertainty_score":0.003124237},"labels":[],"label_agreement":null},{"id":"W2462580488","doi":"","title":"Numerical Simulation of the Filling Stage in the Micro-Injection Molding Process","year":2004,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Isothermal process; Mechanics; Momentum (technical analysis); Molding (decorative); Finite element method; Materials science; Transfer molding; Flow (mathematics); Work (physics); Newtonian fluid; Computer simulation; Stage (stratigraphy); Mechanical engineering; Mold; Composite material; Thermodynamics; Physics; Engineering; Geology","score_opus":0.01683910939935071,"score_gpt":0.24377968826201285,"score_spread":0.22694057886266214,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2462580488","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8226733,0.0004141802,0.09937063,0.00074207765,0.00023914306,0.00016361714,0.000617722,0.0006670529,0.07511236],"genre_scores_gemma":[0.98047227,0.00008012567,0.012880247,0.000034313944,0.0000101071555,0.000039561495,0.000126093,0.0000574708,0.0062999623],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998776,0.000017913311,0.0000048584584,0.000017008057,0.000054594002,0.00002801257],"domain_scores_gemma":[0.9995327,0.00024954864,0.00005734011,0.000033470027,0.00008883567,0.00003811916],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002117674,0.00023649113,0.0005200977,0.00027066979,0.0005327709,0.00066418556,0.00068790914,0.0012018919,0.0056978916],"category_scores_gemma":[0.0010002418,0.0003407042,0.00037796152,0.0003206851,0.00052987225,0.0004924315,0.0002876653,0.00041007652,0.00047460973],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009052445,0.00005016352,0.00092188304,0.00005527288,0.000006889164,0.00009046438,0.000040254236,0.98508275,0.006395644,0.0041028205,0.00033052935,0.0028328714],"study_design_scores_gemma":[0.000010739458,0.000016493077,0.00026187112,0.0000024954454,0.0000019133536,0.000009997262,0.0000068619747,0.99748516,0.0017154464,0.00021190592,0.0002731557,0.0000038849325],"about_ca_topic_score_codex":0.008077813,"about_ca_topic_score_gemma":0.0050569456,"teacher_disagreement_score":0.008077813,"about_ca_system_score_codex":0.0008393427,"about_ca_system_score_gemma":0.0011415678,"threshold_uncertainty_score":0.019061387},"labels":[],"label_agreement":null},{"id":"W2466489180","doi":"10.1155/2016/7078045","title":"Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding","year":2016,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada; Polytechnique Montréal","keywords":"Materials science; Rheology; Composite material; Molding (decorative); Raw material; Shear thinning; Viscosity; Wax; Shear rate; Mixing (physics); Inconel; Shear (geology); Apparent viscosity; Organic chemistry","score_opus":0.008370658764332708,"score_gpt":0.2051737400330508,"score_spread":0.1968030812687181,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2466489180","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9976802,0.00037021478,0.0009521209,0.000010677326,0.0000061222463,0.000020461293,0.00020105044,0.00003990942,0.00071933353],"genre_scores_gemma":[0.9971143,0.000333975,0.001610409,0.000008656911,0.0000028607203,0.000016346292,0.00023871871,0.00003437961,0.0006404295],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996012,0.00004395479,0.00006349834,0.00006605863,0.00016541446,0.00005986705],"domain_scores_gemma":[0.99936324,0.00021045032,0.00021409863,0.000060012666,0.00011454585,0.000037712598],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000352293,0.00041574775,0.00034769485,0.0005216631,0.00018114707,0.00032579593,0.00021986468,0.0002912534,0.00090858573],"category_scores_gemma":[0.001052717,0.00018189356,0.00023926469,0.00068745005,0.0001996107,0.00032735826,0.00013050671,0.00036616274,0.000262795],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013009862,0.000029944977,0.000725909,0.000054712924,0.000006209902,0.00005577278,0.00003963714,0.0004918226,0.9951616,0.00003875456,0.0000150250335,0.0032505523],"study_design_scores_gemma":[0.0000025298189,0.00016411263,0.0031435832,0.0000038590842,0.000008123307,0.00002270891,0.00000974983,0.00041290818,0.99599946,0.0000058233545,0.00022393982,0.0000033370243],"about_ca_topic_score_codex":0.0008188445,"about_ca_topic_score_gemma":0.0015215186,"teacher_disagreement_score":0.00090858573,"about_ca_system_score_codex":0.00025048057,"about_ca_system_score_gemma":0.00018746931,"threshold_uncertainty_score":0.0030395389},"labels":[],"label_agreement":null},{"id":"W2472393671","doi":"10.1002/pen.24369","title":"Factors Affecting Gloss and Color of Decorative Pressure Sensitive Adhesive Films During Thermomechanical Deformation","year":2016,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"BP (Canada); McMaster University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Gloss (optics); Materials science; Crystallinity; Composite material; Adhesive; Surface finish; Surface roughness; Amorphous solid; Crystallography; Layer (electronics)","score_opus":0.009345095642524595,"score_gpt":0.1985394338916393,"score_spread":0.18919433824911472,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2472393671","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9988556,0.0002607889,0.0003990787,0.000009907481,0.0000040078316,0.0000046377145,0.00003393447,0.000006123214,0.00042579114],"genre_scores_gemma":[0.9987919,0.00023316161,0.0004096225,0.000012268516,0.0000020056646,0.000006343123,0.00006129569,0.000011134577,0.00047233398],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998709,0.000012743634,0.000008828974,0.000020318372,0.000053770007,0.00003347592],"domain_scores_gemma":[0.99968493,0.00008356774,0.000100662735,0.000032773132,0.000072637326,0.000025310386],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00014421901,0.00025425287,0.00016107298,0.00017203482,0.0002013767,0.0003695549,0.00014275097,0.00019795021,0.0007127835],"category_scores_gemma":[0.00043430703,0.00021104657,0.00014780942,0.00021294256,0.00023920562,0.00025283388,0.00015316012,0.0003978926,0.00011245532],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000029877772,0.0000045536376,0.0005044982,0.000013684638,0.000004437789,0.000040694886,0.000041515887,0.000052114417,0.9986499,0.000011906418,0.000009398903,0.00063757185],"study_design_scores_gemma":[0.000003164055,0.00011347921,0.020643342,0.0000038030591,0.000023521321,0.00009312282,0.00010541616,0.00056950306,0.9781179,0.000010332237,0.0003101277,0.0000062117797],"about_ca_topic_score_codex":0.0009219166,"about_ca_topic_score_gemma":0.0017385349,"teacher_disagreement_score":0.0009219166,"about_ca_system_score_codex":0.00019415667,"about_ca_system_score_gemma":0.000077619035,"threshold_uncertainty_score":0.0023844838},"labels":[],"label_agreement":null},{"id":"W2474049929","doi":"10.1002/pen.24352","title":"Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites","year":2016,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":25,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University; Western University","funders":"","keywords":"Materials science; Masterbatch; Composite material; Electrical resistivity and conductivity; Polystyrene; Percolation threshold; Nanocomposite; Microstructure; Carbon nanotube; Shearing (physics); Molding (decorative); Anisotropy; Carbon black; Polymer","score_opus":0.009175813930318438,"score_gpt":0.18198070267319924,"score_spread":0.1728048887428808,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2474049929","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9981742,0.00015912745,0.0009399207,0.000016963675,0.000009731074,0.000005864032,0.00008454476,0.000034206176,0.00057526876],"genre_scores_gemma":[0.9983335,0.00006786779,0.00084575475,0.0000069071225,0.0000029127991,0.000006553436,0.000057390997,0.000010254989,0.0006688924],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999074,0.0000058496944,0.00000659665,0.000023652367,0.000042045802,0.000014440501],"domain_scores_gemma":[0.9997731,0.00005695947,0.00007235672,0.000016634078,0.000052134732,0.000028888293],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011530628,0.00016825777,0.00010625274,0.00021085028,0.00009326254,0.00017565144,0.00010164087,0.00017408692,0.0006670334],"category_scores_gemma":[0.00026320192,0.00015224439,0.0001229566,0.00013792871,0.00015072283,0.00019574261,0.00006787341,0.000197283,0.000136119],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00002751537,0.000007716393,0.00014854084,0.000008487507,0.0000013037793,0.00002188478,0.00001244727,0.000107874446,0.9989687,0.000020400297,0.0000120812565,0.0006630705],"study_design_scores_gemma":[0.0000025022127,0.0000759104,0.003955472,0.0000013880502,0.0000047638005,0.000031152646,0.0000095096775,0.0012074776,0.9945517,0.0000066593443,0.00015058093,0.0000028853076],"about_ca_topic_score_codex":0.00037921188,"about_ca_topic_score_gemma":0.00077953027,"teacher_disagreement_score":0.0006670334,"about_ca_system_score_codex":0.00018954148,"about_ca_system_score_gemma":0.00007590946,"threshold_uncertainty_score":0.0022314787},"labels":[],"label_agreement":null},{"id":"W248446882","doi":"","title":"Powder Injection Molding (PIM) for Low Cost Manufacturing of Intricate Parts to Net-Shape","year":2006,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Metal injection molding; Aerospace; Molding (decorative); Near net shape; Manufacturing engineering; Powder metallurgy; Flexibility (engineering); Materials science; Injection moulding; Mechanical engineering; Process engineering; Engineering; Metallurgy; Sintering","score_opus":0.013005262151750295,"score_gpt":0.21512515056838813,"score_spread":0.20211988841663783,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W248446882","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.07947749,0.0117454035,0.8350229,0.00046371465,0.00052107195,0.00037737307,0.00040479464,0.0035880401,0.068399124],"genre_scores_gemma":[0.45191315,0.007816544,0.51399344,0.00017723099,0.00014803524,0.00019423784,0.00061035744,0.00041140275,0.02473565],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9995982,0.000023410805,0.000014963564,0.000038047314,0.00030007496,0.000025258807],"domain_scores_gemma":[0.9997868,0.00006562691,0.000047924605,0.000052983138,0.00003204036,0.000014683365],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00033236243,0.00048945827,0.0003474493,0.00058738224,0.0003302292,0.0005228947,0.00049308536,0.00036443665,0.0036916777],"category_scores_gemma":[0.00040800482,0.000253301,0.00036796276,0.00052547717,0.00035518373,0.0005394511,0.00043707833,0.00067010144,0.0016959065],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013691261,0.00008822023,0.00052323745,0.0006905668,0.000019004563,0.0003467042,0.00012110183,0.002477586,0.6863933,0.020276098,0.005131289,0.28379598],"study_design_scores_gemma":[0.00004304229,0.00060588,0.0015209512,0.000054470886,0.00004367585,0.001996785,0.00002689729,0.016743628,0.82975703,0.0026507878,0.14653373,0.000023044286],"about_ca_topic_score_codex":0.0001809815,"about_ca_topic_score_gemma":0.0005717806,"teacher_disagreement_score":0.0036916777,"about_ca_system_score_codex":0.00029358437,"about_ca_system_score_gemma":0.000345711,"threshold_uncertainty_score":0.012349904},"labels":[],"label_agreement":null},{"id":"W2488602521","doi":"10.1016/b978-188420791-4.50008-0","title":"Design Optimization of Gas Channels for an Air Cleaner Assembly Using CAE Simulations","year":2001,"lang":"en","type":"book-chapter","venue":"Elsevier eBooks","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Process engineering; Mechanical engineering; Environmental science; Engineering; Computer science","score_opus":0.05922664656196309,"score_gpt":0.2615137792167774,"score_spread":0.2022871326548143,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2488602521","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.18837854,0.0018454571,0.7006969,0.0008719805,0.0002614935,0.00036689086,0.00064214645,0.0016084809,0.10532818],"genre_scores_gemma":[0.7868479,0.00079224084,0.19693041,0.00011705496,0.00005095011,0.00063023204,0.0003081027,0.00040428273,0.013918955],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99987376,0.000028884811,0.0000037915377,0.000020237825,0.000050943145,0.000022441001],"domain_scores_gemma":[0.99957794,0.00027618711,0.000028720817,0.000025148931,0.00007173521,0.000020301766],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004289964,0.000682552,0.0009994031,0.00050468673,0.0007924689,0.0010884409,0.00086492876,0.0013670862,0.006088472],"category_scores_gemma":[0.0011725851,0.0007444974,0.0007505961,0.00044730987,0.0005555684,0.00057180953,0.00042971736,0.0008036822,0.0005567022],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000016198146,0.0000126387295,0.00007236225,0.000028466147,0.0000050350163,0.000010147594,0.000008018602,0.9942678,0.0009486314,0.001686377,0.00025144024,0.002692843],"study_design_scores_gemma":[0.000009179181,0.0000075189064,0.00002542602,0.0000029456849,0.0000025168736,0.0000020452167,0.000003407451,0.9987717,0.00040927256,0.00031930345,0.00044450824,0.0000022333593],"about_ca_topic_score_codex":0.00920049,"about_ca_topic_score_gemma":0.009562076,"teacher_disagreement_score":0.00920049,"about_ca_system_score_codex":0.0011404315,"about_ca_system_score_gemma":0.0018580084,"threshold_uncertainty_score":0.02036792},"labels":[],"label_agreement":null},{"id":"W2497882088","doi":"10.1142/9789812770943_0003","title":"REAL-TIME AND IN-LINE ULTRASONIC DIAGNOSTICS OF POLYMER PROCESSES","year":2007,"lang":"en","type":"book-chapter","venue":"WORLD SCIENTIFIC eBooks","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Carleton University; National Research Council Canada","funders":"","keywords":"Ultrasonic sensor; Materials science; Line (geometry); Polymer; Acoustics; Composite material; Physics; Mathematics","score_opus":0.023842724482632725,"score_gpt":0.22738760418485915,"score_spread":0.20354487970222643,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2497882088","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.053045448,0.021597574,0.8128596,0.00075666496,0.0007945027,0.0001668767,0.0004468719,0.004562486,0.10577],"genre_scores_gemma":[0.37666866,0.01575149,0.28378922,0.0006930424,0.0007950212,0.00016331494,0.00065391674,0.0008509111,0.32063434],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.99966466,0.00004063551,0.000008925101,0.000051522988,0.00021155733,0.000022692599],"domain_scores_gemma":[0.9997012,0.0001679764,0.000023717732,0.0000361355,0.00005977588,0.000011056983],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002853432,0.0005007655,0.00035105503,0.00041809503,0.00013836988,0.0008449258,0.001031533,0.00067373127,0.0075560827],"category_scores_gemma":[0.0004427392,0.00035150044,0.00013982727,0.00037175044,0.0003487771,0.0010825761,0.00035798465,0.00058608735,0.0027071997],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0001922549,0.000099853256,0.00031073263,0.00038301694,0.00001274244,0.00010717188,0.00028557098,0.0014325907,0.5730604,0.007508279,0.0082286885,0.4083786],"study_design_scores_gemma":[0.000034059285,0.00030304183,0.0015731014,0.00010682937,0.0000397027,0.0015593448,0.00010946492,0.025145132,0.8117354,0.004235845,0.15511988,0.000038211],"about_ca_topic_score_codex":0.00016657,"about_ca_topic_score_gemma":0.0003669275,"teacher_disagreement_score":0.0075560827,"about_ca_system_score_codex":0.00022363332,"about_ca_system_score_gemma":0.00016774819,"threshold_uncertainty_score":0.025277615},"labels":[],"label_agreement":null},{"id":"W2514009078","doi":"10.4028/www.scientific.net/kem.704.118","title":"New Titanium Alloy Feedstock for High Performance Metal Injection Molding Parts","year":2016,"lang":"en","type":"article","venue":"Key engineering materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Metal injection molding; Raw material; Materials science; Titanium; Aerospace; Metallurgy; Molding (decorative); Sintering; Titanium alloy; Alloy; Automotive industry; Composite material; Engineering","score_opus":0.010682305074116476,"score_gpt":0.1843963250048833,"score_spread":0.17371401993076682,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2514009078","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.92668575,0.0017988501,0.053102266,0.0001057631,0.00019284044,0.00019943563,0.00080354547,0.0010560896,0.016055392],"genre_scores_gemma":[0.9434296,0.0009800832,0.045902263,0.00003971742,0.000021702186,0.00006376796,0.0007188145,0.00018067528,0.008663465],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99980074,0.000008615306,0.000012061063,0.000027074837,0.00012782242,0.000023839948],"domain_scores_gemma":[0.9999182,0.000012285842,0.000025808424,0.000009267873,0.000022611026,0.000011654142],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00013195099,0.0004317941,0.00023526633,0.0006429933,0.00018141983,0.00035442723,0.00038715065,0.00036187452,0.0015490612],"category_scores_gemma":[0.00020569944,0.00018676226,0.0002509345,0.00049077783,0.00015153112,0.00038840828,0.00017782328,0.00051202165,0.00070386747],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000025402956,0.000013703657,0.000082591476,0.000045462213,0.00000285007,0.000044416836,0.000007618321,0.00031096124,0.9954268,0.00021868132,0.00005266848,0.0037688278],"study_design_scores_gemma":[0.000004078964,0.000107236716,0.00053512235,0.0000036850863,0.0000057508028,0.000053559816,0.0000058875385,0.0010590053,0.99531955,0.00003656958,0.0028655918,0.0000041136464],"about_ca_topic_score_codex":0.000513163,"about_ca_topic_score_gemma":0.0022589925,"teacher_disagreement_score":0.0015490612,"about_ca_system_score_codex":0.000504796,"about_ca_system_score_gemma":0.00026039613,"threshold_uncertainty_score":0.005182147},"labels":[],"label_agreement":null},{"id":"W2525796921","doi":"10.1002/pat.3946","title":"Morphology and flow effect of microinjection‐molded plastic microgears","year":2016,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"","keywords":"Materials science; Differential scanning calorimetry; Microinjection; Molding (decorative); Microstructure; Optical microscope; Layer (electronics); Composite material; Process (computing); Polymer; Morphology (biology); Thermal; Polarized light microscopy; Scanning electron microscope; Computer science; Optics","score_opus":0.004849071536620785,"score_gpt":0.20420424484720937,"score_spread":0.19935517331058858,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2525796921","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99718106,0.00023271078,0.001198693,0.00001468179,0.0000151894155,0.0000082083725,0.00004685041,0.000067787114,0.001234885],"genre_scores_gemma":[0.9980077,0.00010480066,0.0008891531,0.000009155276,0.0000035028997,0.0000041659696,0.000032418113,0.000015858048,0.0009333128],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999548,0.000003840524,0.00000235364,0.000012151945,0.000014580777,0.000012221621],"domain_scores_gemma":[0.9998809,0.000033397017,0.00004089555,0.00001130334,0.000019688423,0.00001381574],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000071811766,0.00012827798,0.000071478426,0.00016429555,0.00012350276,0.00026018347,0.000090117996,0.0001212415,0.0012472918],"category_scores_gemma":[0.00022007021,0.00012789252,0.00008679843,0.00007683906,0.0002208467,0.0002027933,0.00006677941,0.00014128399,0.0001313275],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000087862005,0.000017941593,0.0005751744,0.000024332663,0.0000025979107,0.00011417402,0.000059139227,0.0006791646,0.9937177,0.00016905171,0.00005563999,0.004497282],"study_design_scores_gemma":[0.000010626202,0.00025207814,0.012819323,0.0000069321513,0.0000105953295,0.00012302659,0.000060620438,0.0048384927,0.9806573,0.000043737866,0.0011684388,0.000008821621],"about_ca_topic_score_codex":0.000599701,"about_ca_topic_score_gemma":0.00076080253,"teacher_disagreement_score":0.0012472918,"about_ca_system_score_codex":0.00017436851,"about_ca_system_score_gemma":0.00009288143,"threshold_uncertainty_score":0.0041725636},"labels":[],"label_agreement":null},{"id":"W2562701335","doi":"","title":"Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite","year":2016,"lang":"en","type":"dissertation","venue":"TSpace","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"University of Toronto; Department of Chemicals and Petrochemicals, Ministry of Chemicals and Fertilizers, India","keywords":"Composite number; Molding (decorative); Composite material; Natural fiber; Materials science; Pulp and paper industry; Engineering","score_opus":0.009454997456742964,"score_gpt":0.2619997690916537,"score_spread":0.25254477163491074,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2562701335","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99338734,0.00031230022,0.005096508,0.000011084142,0.00001662163,0.000020970954,0.0000754561,0.00010270135,0.0009771191],"genre_scores_gemma":[0.99280614,0.00024032149,0.005461662,0.0000059671775,0.0000033628078,0.000013032571,0.00005764372,0.000025397983,0.0013864535],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999454,0.000005010078,0.000004234141,0.000012759359,0.000022901364,0.000009694708],"domain_scores_gemma":[0.9998951,0.000025006575,0.000046641555,0.0000140275915,0.000010703684,0.000008562319],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00010080652,0.00018754906,0.000092326794,0.00013438195,0.00006175016,0.00011223025,0.00012409489,0.000092921575,0.0007847351],"category_scores_gemma":[0.000108964115,0.000109072964,0.00019034144,0.00009477941,0.00008824719,0.00011426656,0.00008337972,0.00023967681,0.00011486456],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000026945612,0.0000163068,0.00016583645,0.00004423817,0.0000020226812,0.000051579627,0.000023058597,0.00040736026,0.9959013,0.00006731756,0.000013111481,0.0032808902],"study_design_scores_gemma":[0.0000015628941,0.00024813708,0.0023859036,0.0000042995066,0.000003119212,0.000042781503,0.0000073149067,0.0012348864,0.9954686,0.000012188773,0.00058866467,0.000002499604],"about_ca_topic_score_codex":0.00024893117,"about_ca_topic_score_gemma":0.00048327772,"teacher_disagreement_score":0.0007847351,"about_ca_system_score_codex":0.000078332494,"about_ca_system_score_gemma":0.000071335024,"threshold_uncertainty_score":0.0026251674},"labels":[],"label_agreement":null},{"id":"W2568870496","doi":"10.1007/s00170-016-9889-1","title":"Low-pressure powder injection molding using an innovative injection press concept","year":2017,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada; École de technologie supérieure","keywords":"Materials science; Raw material; Wax; Paraffin wax; Injection molding machine; Viscosity; Molding (decorative); Thermogravimetric analysis; Mold; Stearic acid; Rheology; Composite material; Process (computing); Waste management; Chemical engineering; Engineering","score_opus":0.01970216845779997,"score_gpt":0.2769310203039309,"score_spread":0.2572288518461309,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2568870496","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.5225494,0.004007801,0.4515552,0.00046530092,0.00073094503,0.000598115,0.00021221211,0.0023064082,0.01757456],"genre_scores_gemma":[0.79103005,0.001133213,0.19973251,0.00014351634,0.0002470075,0.00020943212,0.00012820901,0.00016889987,0.007207168],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996413,0.000023731196,0.000019269239,0.00007520313,0.00021616003,0.000024314595],"domain_scores_gemma":[0.9998036,0.000037901023,0.0000749469,0.000031215382,0.00003352539,0.000018856397],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00038262844,0.0005426373,0.00045525018,0.00042373748,0.00022928166,0.00062686956,0.0007900335,0.0005774827,0.0014587194],"category_scores_gemma":[0.00022962995,0.00034253762,0.0004095251,0.00023726489,0.0004495562,0.0011939376,0.00044977697,0.0007577877,0.00061860785],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008735452,0.00010341295,0.00015721623,0.00015787927,0.000010787321,0.0000735596,0.000032226188,0.00041174452,0.98156816,0.003424836,0.00018424368,0.013788519],"study_design_scores_gemma":[0.00005981429,0.00075911946,0.0009649732,0.00000811831,0.000022664892,0.0003100136,0.0000095564965,0.009200241,0.9818123,0.0003175143,0.0065101534,0.000025491769],"about_ca_topic_score_codex":0.00006481909,"about_ca_topic_score_gemma":0.000114520175,"teacher_disagreement_score":0.0014587194,"about_ca_system_score_codex":0.00021935001,"about_ca_system_score_gemma":0.00032489584,"threshold_uncertainty_score":0.0048799515},"labels":[],"label_agreement":null},{"id":"W2604315831","doi":"10.1016/j.polymertesting.2017.04.008","title":"Automated image analysis to characterize the melt densification stage of polymer sintering processes","year":2017,"lang":"en","type":"article","venue":"Polymer Testing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University","funders":"","keywords":"Materials science; Sintering; Bubble; Polymer; Visualization; Melt flow index; Dissolution; Process (computing); Particle size; Composite material; Computer science; Artificial intelligence; Chemical engineering","score_opus":0.04660257563746957,"score_gpt":0.2722835332226799,"score_spread":0.22568095758521034,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2604315831","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.54473203,0.00040742254,0.44405556,0.00011056441,0.000037704136,0.00017720927,0.0007674284,0.004678588,0.0050335],"genre_scores_gemma":[0.7699766,0.00023373042,0.22520994,0.00005490963,0.000026377002,0.00018757694,0.0007358369,0.0004302377,0.0031448547],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997981,0.000020213767,0.000009876001,0.000032909957,0.00011065012,0.000028280207],"domain_scores_gemma":[0.99943334,0.00017180364,0.00007316766,0.00007508029,0.00023065785,0.000015996175],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022528613,0.0003563812,0.0002328666,0.0013797389,0.0002500208,0.00047118182,0.0004476302,0.00029073103,0.0020349845],"category_scores_gemma":[0.00050446915,0.00025645984,0.00019412224,0.00052349665,0.00019811807,0.0003730774,0.00023555184,0.0003182103,0.00047067925],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00018014862,0.00011960782,0.0035425366,0.000103598744,0.000029041756,0.000052803163,0.00009617662,0.005264624,0.8396391,0.000852059,0.0010752741,0.149045],"study_design_scores_gemma":[0.00001748621,0.00010657588,0.019009452,0.000010108937,0.00003046594,0.00015286569,0.00004891662,0.20219235,0.77486384,0.00041168655,0.0031327454,0.000023431268],"about_ca_topic_score_codex":0.001863832,"about_ca_topic_score_gemma":0.0041380827,"teacher_disagreement_score":0.0020349845,"about_ca_system_score_codex":0.0004353566,"about_ca_system_score_gemma":0.0003918417,"threshold_uncertainty_score":0.0068077445},"labels":[],"label_agreement":null},{"id":"W2607449659","doi":"10.1016/j.powtec.2017.04.051","title":"Design of trimodal Fe micro-nanopowder feedstock for micro powder injection molding","year":2017,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"","keywords":"Raw material; Materials science; Extrusion; Homogeneity (statistics); Agglomerate; Composite material; Rheometer; Particle size; Particle-size distribution; Plastics extrusion; Rheology; Chemical engineering","score_opus":0.02671147327221964,"score_gpt":0.2519808278670164,"score_spread":0.22526935459479677,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2607449659","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8488955,0.00078419404,0.14108722,0.00012316642,0.00007247309,0.00019286425,0.000428144,0.0005172229,0.007899252],"genre_scores_gemma":[0.9450417,0.0002791033,0.052228156,0.00001895878,0.000009187437,0.00011881658,0.00017237269,0.000048447717,0.0020832366],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999218,0.0000036698107,0.0000050629865,0.000025749954,0.0000291692,0.000014561133],"domain_scores_gemma":[0.9999238,0.000009851551,0.00002728966,0.000008167503,0.000021814223,0.000009029729],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011650944,0.00028360987,0.00026994536,0.00020321025,0.00018986217,0.00032233968,0.00033490668,0.00029812384,0.0007517494],"category_scores_gemma":[0.00013808254,0.00018117228,0.00023673523,0.00018054509,0.00012453742,0.0003152526,0.00015531374,0.0002529841,0.000342159],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000037376918,0.000022561651,0.00013639286,0.00006650828,0.00000449443,0.000028652386,0.00000823405,0.003095488,0.99161154,0.00046721974,0.000058396206,0.004463256],"study_design_scores_gemma":[0.000013183324,0.00016489194,0.00068158156,0.0000038533162,0.0000089785935,0.000040633142,0.000011690075,0.023888059,0.97318745,0.000101059675,0.0018922993,0.0000063849807],"about_ca_topic_score_codex":0.00056106946,"about_ca_topic_score_gemma":0.0017021099,"teacher_disagreement_score":0.0007517494,"about_ca_system_score_codex":0.0005074273,"about_ca_system_score_gemma":0.0003117649,"threshold_uncertainty_score":0.0036816597},"labels":[],"label_agreement":null},{"id":"W2608960573","doi":"10.3968/9453","title":"Synthesizing and Performance Test of a New Aciding Gelatinizer ZCY-1","year":2017,"lang":"en","type":"article","venue":"Advances in petroleum exploration and development","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Cationic polymerization; Mass fraction; Monomer; Polymerization; Aqueous solution; Viscosity; Chemical engineering; Chemistry; Polymer chemistry; Shearing (physics); Fraction (chemistry); Redox; Materials science; Organic chemistry; Polymer; Composite material","score_opus":0.027620880102230252,"score_gpt":0.24217383126235179,"score_spread":0.21455295116012152,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2608960573","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97865456,0.0017985881,0.016223783,0.00008251036,0.00003837465,0.000111317466,0.0001436808,0.00017265095,0.0027744675],"genre_scores_gemma":[0.9731312,0.0014960768,0.02155979,0.000042900017,0.000015850545,0.00006234409,0.0002171793,0.000050115043,0.0034245115],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998703,0.000013011837,0.000010084077,0.000038397335,0.00004900333,0.00001919787],"domain_scores_gemma":[0.9998845,0.00002206734,0.00003837767,0.000008865672,0.00002302589,0.000023141882],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022753356,0.00029854904,0.00019162506,0.00034132434,0.00010957878,0.00020984568,0.00018163619,0.00026701193,0.0009599042],"category_scores_gemma":[0.0002573713,0.00013927836,0.00023478724,0.00022938465,0.00017237257,0.00045047875,0.00018373427,0.00030332833,0.00025814766],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000039172304,0.000013857642,0.00014451706,0.00005658036,0.0000029503303,0.00003420842,0.000011827867,0.00009426639,0.9976411,0.00006200534,0.00001734159,0.0018822397],"study_design_scores_gemma":[0.0000061806063,0.00020323387,0.000938077,0.0000031607576,0.000011259678,0.00006238841,0.000009459958,0.0006792518,0.9969309,0.000007937941,0.0011442261,0.0000039398815],"about_ca_topic_score_codex":0.00048349774,"about_ca_topic_score_gemma":0.00067083206,"teacher_disagreement_score":0.0009599042,"about_ca_system_score_codex":0.0001603662,"about_ca_system_score_gemma":0.00017433609,"threshold_uncertainty_score":0.0032112002},"labels":[],"label_agreement":null},{"id":"W2610098306","doi":"","title":"The influence of mold cooling flow rate on dynamic mechanical properties of injection molded polycarbonate at the University of New Brunswick Fredericton, New Brunswick","year":2002,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Polycarbonate; Mold; Flow (mathematics); Composite material; Materials science; Volumetric flow rate; Heat flow; Meteorology; Mechanics; Physics","score_opus":0.01431218937392897,"score_gpt":0.18235408746777418,"score_spread":0.1680418980938452,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2610098306","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99741614,0.0004488117,0.0006903732,0.00003268304,0.00001485218,0.0000073427204,0.00006829085,0.000015804033,0.0013056681],"genre_scores_gemma":[0.99725693,0.00027330715,0.0005571258,0.000014806368,0.000003692277,0.0000063243333,0.000102212856,0.000015672174,0.0017698804],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99982893,0.000012960128,0.000009564113,0.000025750582,0.00008311169,0.000039772032],"domain_scores_gemma":[0.9995351,0.00019197869,0.00007518625,0.000024944537,0.00013457322,0.000038340924],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00027979427,0.00014180456,0.000125038,0.0002181029,0.00021492624,0.0003187903,0.00015597745,0.00012349781,0.0010460857],"category_scores_gemma":[0.0006351637,0.00015084792,0.00011403862,0.00018484202,0.00015673797,0.00017803807,0.00009069932,0.0002261282,0.00019457497],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00017598626,0.00002088447,0.0011787298,0.000020497037,0.0000038808744,0.000033697324,0.00003407861,0.0007067366,0.99430555,0.00006190992,0.00005824986,0.0033997295],"study_design_scores_gemma":[0.0000045347047,0.00016126948,0.0085987095,0.000003851352,0.0000085072115,0.000018196151,0.000014426388,0.0012977809,0.98929507,0.000005516496,0.00058694585,0.0000052729065],"about_ca_topic_score_codex":0.009471772,"about_ca_topic_score_gemma":0.02126649,"teacher_disagreement_score":0.009471772,"about_ca_system_score_codex":0.00057924585,"about_ca_system_score_gemma":0.0004597545,"threshold_uncertainty_score":0.01883328},"labels":[],"label_agreement":null},{"id":"W2739229577","doi":"10.1016/j.powtec.2017.07.056","title":"Influence of segregation on rheological properties of wax-based feedstocks","year":2017,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"Pratt and Whitney Canada; Pratt & Whitney","keywords":"Rheology; Materials science; Shear thinning; Viscosity; Dilatant; Wax; Composite material; Shear rate","score_opus":0.019215957518785885,"score_gpt":0.22233144248557815,"score_spread":0.20311548496679227,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2739229577","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9984505,0.00035558717,0.00054753624,0.000016529817,0.000008761006,0.000004597494,0.000058977654,0.000013208529,0.0005441443],"genre_scores_gemma":[0.99884856,0.00024012,0.0003834495,0.00000879101,0.0000035243622,0.000003905446,0.000063547974,0.000015805192,0.00043219767],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99984515,0.000023756915,0.000019485853,0.000029799268,0.00004254848,0.00003926147],"domain_scores_gemma":[0.9997756,0.000087759174,0.000059900285,0.000015550819,0.000039097966,0.000022011342],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00018897718,0.00027157477,0.00023291657,0.00025537016,0.00018036751,0.0004929653,0.000118373784,0.00014866231,0.0009611095],"category_scores_gemma":[0.0005208173,0.00015504609,0.0001788328,0.0003011192,0.0001995091,0.0003640066,0.00016769239,0.00036661577,0.0002663298],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00031288713,0.000030768995,0.0004734271,0.000042001757,0.00000873355,0.00004531319,0.00002651009,0.00024948939,0.9970906,0.00006215347,0.000017692904,0.0016404497],"study_design_scores_gemma":[0.000002862312,0.000054306598,0.00068748416,0.0000019520871,0.000006571001,0.000008719021,0.000011668809,0.00041537097,0.9986571,0.0000073215947,0.00014513047,0.0000014558486],"about_ca_topic_score_codex":0.0006667115,"about_ca_topic_score_gemma":0.00089186145,"teacher_disagreement_score":0.0009611095,"about_ca_system_score_codex":0.00020282541,"about_ca_system_score_gemma":0.00023860518,"threshold_uncertainty_score":0.0032151937},"labels":[],"label_agreement":null},{"id":"W2742417094","doi":"10.1155/2017/2748070","title":"Optimization of Alumina Slurry for Oxide-Oxide Ceramic Composites Manufactured by Injection Molding","year":2017,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal; Natural Sciences and Engineering Research Council of Canada","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Suspension (topology); Composite material; Slurry; Rheology; Ceramic; Molding (decorative); Oxide; Viscosity; Newtonian fluid; Metallurgy","score_opus":0.006580774112851724,"score_gpt":0.22833488197659546,"score_spread":0.22175410786374375,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2742417094","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97617525,0.0016135293,0.017821291,0.00008663877,0.000080703634,0.00012201921,0.00025207538,0.0002513044,0.0035970772],"genre_scores_gemma":[0.97670776,0.00097535836,0.020465437,0.00003708748,0.000020430793,0.00008476449,0.00028899423,0.00013210619,0.0012881425],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99965405,0.00004141488,0.000039992734,0.00008665518,0.00013344432,0.00004441406],"domain_scores_gemma":[0.99977916,0.00006420566,0.00007040841,0.000015362608,0.000054857082,0.000016069167],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00036524775,0.00046786666,0.0004743449,0.00038856437,0.00022914201,0.00052947795,0.0003303577,0.000311152,0.0010218185],"category_scores_gemma":[0.0005672776,0.00020880446,0.00035017225,0.00031091063,0.00017278494,0.00028925543,0.00018753046,0.00048151243,0.00054305175],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000035339766,0.000027082946,0.00008014813,0.00006210449,0.0000031941663,0.000021609958,0.000015485208,0.00021664052,0.9977424,0.000031130894,0.000017588805,0.0017472329],"study_design_scores_gemma":[0.000007038237,0.00021987825,0.0006381,0.000006646533,0.000013857003,0.000026528916,0.000020468857,0.0012471685,0.9969626,0.000015805315,0.00083702226,0.000004860927],"about_ca_topic_score_codex":0.00046535366,"about_ca_topic_score_gemma":0.0016583737,"teacher_disagreement_score":0.0010218185,"about_ca_system_score_codex":0.0002132258,"about_ca_system_score_gemma":0.00025778438,"threshold_uncertainty_score":0.003418386},"labels":[],"label_agreement":null},{"id":"W2767184710","doi":"10.1002/sia.6332","title":"Analysis of polymer parts: buried problems","year":2017,"lang":"en","type":"article","venue":"Surface and Interface Analysis","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"","keywords":"Polycarbonate; Acrylonitrile butadiene styrene; Polymer; Materials science; Automotive industry; Composite material; Alloy; Forensic engineering; Engineering","score_opus":0.018362088331760243,"score_gpt":0.2537343035768525,"score_spread":0.23537221524509228,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2767184710","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.4012103,0.0015113215,0.58712244,0.000216325,0.00004353405,0.00007960282,0.00018758445,0.0008575593,0.0087713795],"genre_scores_gemma":[0.884373,0.00074729667,0.10602458,0.000058348323,0.000020209072,0.00004022793,0.00030989537,0.0002740952,0.008152323],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.99952674,0.00003403995,0.000014684222,0.00008346866,0.00028174891,0.000059279206],"domain_scores_gemma":[0.99927765,0.00027488035,0.00014146967,0.000117202995,0.00016152477,0.00002722712],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00036932513,0.0006506004,0.0004711692,0.00094423984,0.00032041923,0.00094486214,0.0005479661,0.00083060726,0.0035763273],"category_scores_gemma":[0.001260146,0.0003604888,0.00046993257,0.00052896066,0.0006906744,0.0014130857,0.00058937026,0.00063811865,0.0008064651],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00025254852,0.00015414164,0.009808674,0.00074881664,0.000087102824,0.0019124103,0.00070738525,0.14711091,0.58951515,0.016282,0.0016686781,0.23175214],"study_design_scores_gemma":[0.000014691363,0.00048308633,0.012536238,0.00009956353,0.000048258353,0.0024316835,0.0007026824,0.6428968,0.30671406,0.022341762,0.011684315,0.00004689701],"about_ca_topic_score_codex":0.00042054817,"about_ca_topic_score_gemma":0.00035623327,"teacher_disagreement_score":0.0035763273,"about_ca_system_score_codex":0.0003012705,"about_ca_system_score_gemma":0.0002954581,"threshold_uncertainty_score":0.011964023},"labels":[],"label_agreement":null},{"id":"W2769818498","doi":"10.1002/cjce.23072","title":"Three‐dimensional simulations of non‐isothermal flow for gas penetration in complex cavity during gas assisted injection moulding process","year":2017,"lang":"en","type":"article","venue":"The Canadian Journal of Chemical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"National Natural Science Foundation of China","keywords":"Mechanics; Penetration (warfare); Isothermal process; Flow (mathematics); Mechanical engineering; Materials science; Thermodynamics; Mathematics; Physics; Engineering","score_opus":0.02515376654250111,"score_gpt":0.23971068783627966,"score_spread":0.21455692129377854,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2769818498","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9564435,0.000107381275,0.03852136,0.0001280771,0.000027818483,0.000036107722,0.00008068759,0.00021327657,0.0044418257],"genre_scores_gemma":[0.9947277,0.00003178297,0.0044662957,0.000010986373,0.0000021078592,0.000020004896,0.000026742971,0.000016826576,0.00069757225],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999342,0.0000148855015,0.0000025931538,0.000008263148,0.000019594894,0.000020525033],"domain_scores_gemma":[0.9998084,0.00010520735,0.000026234875,0.000016127362,0.000024785862,0.000019325613],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022189655,0.00036093517,0.00032090774,0.00029124896,0.00044920298,0.000438036,0.0004464875,0.00088085094,0.0011260953],"category_scores_gemma":[0.0005070048,0.00020748092,0.00040419702,0.00020948963,0.0006785868,0.0004055672,0.0003503586,0.00038606286,0.00007326951],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006359394,0.000040285606,0.0014003617,0.00002495681,0.000008636514,0.00014336008,0.000075768556,0.9852771,0.009238598,0.0015265552,0.00012267337,0.0020781097],"study_design_scores_gemma":[0.000005329609,0.00001111746,0.00026708,0.0000013003412,0.0000011873606,0.0000062734925,0.000008070541,0.9985146,0.0010424783,0.00007476046,0.00006510551,0.0000027598853],"about_ca_topic_score_codex":0.007259492,"about_ca_topic_score_gemma":0.003254101,"teacher_disagreement_score":0.007259492,"about_ca_system_score_codex":0.00051515986,"about_ca_system_score_gemma":0.00057657075,"threshold_uncertainty_score":0.014434457},"labels":[],"label_agreement":null},{"id":"W2770204655","doi":"10.3139/217.3472","title":"Flow and Thermal History Effects on Morphology and Tensile Behavior of Poly(oxymethylene) Micro Injection Molded Parts","year":2017,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Micromolding Solutions (Canada); National Research Council Canada; McGill University","funders":"","keywords":"Materials science; Crystallinity; Differential scanning calorimetry; Composite material; Molding (decorative); Shrinkage; Polymer; Morphology (biology); Microstructure","score_opus":0.016384870416484728,"score_gpt":0.23712998811784688,"score_spread":0.22074511770136215,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2770204655","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9988452,0.00014163452,0.00067937,0.000004207095,0.000004788972,0.000004258011,0.000032124895,0.000016625458,0.00027180463],"genre_scores_gemma":[0.9992933,0.00006122384,0.00033019678,0.000003017149,0.0000014353129,0.0000030405083,0.000027767317,0.000005469764,0.0002744116],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99995124,0.000005497219,0.000003021509,0.000011748344,0.000017784818,0.000010786851],"domain_scores_gemma":[0.9997284,0.00011329636,0.0000926595,0.000016284821,0.000030056328,0.000019348112],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000113178576,0.0001474724,0.00007549582,0.00018201431,0.000070768045,0.00019265283,0.000087817716,0.0001024077,0.00080036226],"category_scores_gemma":[0.00030945186,0.00012872204,0.000083613566,0.00010761143,0.0001593919,0.00019101158,0.00005860881,0.0001403987,0.00008448139],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00007678203,0.0000149559655,0.0005479907,0.000011398925,0.0000018711501,0.00003522422,0.000026869338,0.00031117673,0.99721247,0.000029022716,0.000008373773,0.0017238255],"study_design_scores_gemma":[0.0000031957115,0.00018920374,0.01260472,0.0000023274388,0.000005521126,0.000031813877,0.000014326297,0.0026943833,0.98428345,0.000009743568,0.0001578136,0.000003563483],"about_ca_topic_score_codex":0.0002623839,"about_ca_topic_score_gemma":0.00040211072,"teacher_disagreement_score":0.00080036226,"about_ca_system_score_codex":0.000120766126,"about_ca_system_score_gemma":0.000051098938,"threshold_uncertainty_score":0.0026775002},"labels":[],"label_agreement":null},{"id":"W2774721578","doi":"","title":"Multi-station injection molding, design and analysis using evolutionary algorithms","year":2001,"lang":"en","type":"dissertation","venue":"TSpace","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Molding (decorative); Computer science; Algorithm; Engineering; Mechanical engineering","score_opus":0.043361835930542714,"score_gpt":0.31636360710054506,"score_spread":0.27300177117000235,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2774721578","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.014660157,0.00028049303,0.9781692,0.000067125045,0.000025635849,0.000054583306,0.000047832997,0.0004506917,0.0062443377],"genre_scores_gemma":[0.513747,0.00062873145,0.47081053,0.000050232047,0.000042140095,0.0002391421,0.00018090048,0.00027328552,0.014028089],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997732,0.00004289321,0.000007910994,0.00003476362,0.00011883473,0.000022509947],"domain_scores_gemma":[0.9994856,0.00028305402,0.00006338362,0.000049379592,0.00010452435,0.000014010271],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00052046665,0.0006446319,0.0007071546,0.00072361215,0.00035050674,0.000842237,0.0008709731,0.00067144545,0.004853178],"category_scores_gemma":[0.0013237831,0.00057413324,0.00070318364,0.0008901784,0.0004355793,0.0004906076,0.00036166917,0.0005794866,0.0005956747],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000023560899,0.000023554518,0.00022462668,0.000061184866,0.000018760486,0.000021543265,0.000016035114,0.9618373,0.0034713887,0.0040271077,0.0005154361,0.029759452],"study_design_scores_gemma":[0.0000067891797,0.000018122497,0.00009836483,0.0000036853144,0.000007313504,0.000007176639,0.0000027946671,0.99675757,0.0014854312,0.0009133171,0.0006972468,0.0000022563888],"about_ca_topic_score_codex":0.0034969437,"about_ca_topic_score_gemma":0.006492746,"teacher_disagreement_score":0.004853178,"about_ca_system_score_codex":0.0008009364,"about_ca_system_score_gemma":0.00094131555,"threshold_uncertainty_score":0.01623553},"labels":[],"label_agreement":null},{"id":"W2789999280","doi":"10.1002/pat.4282","title":"Microinjection molding of multiwalled carbon nanotubes (<scp>CNT</scp>)–filled polycarbonate nanocomposites and comparison with electrical and morphological properties of various other <scp>CNT</scp>‐filled thermoplastic micromoldings","year":2018,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University; Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Masterbatch; Composite material; Nanocomposite; Polycarbonate; Carbon nanotube; Molding (decorative); Thermoplastic; Polymer; Polybutylene terephthalate; Polyester","score_opus":0.009571834548363063,"score_gpt":0.20770231524066107,"score_spread":0.19813048069229802,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2789999280","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99556524,0.00026363664,0.0035426135,0.000010793063,0.000017680957,0.000025733469,0.00008831412,0.00008794406,0.0003980855],"genre_scores_gemma":[0.99298155,0.00020542818,0.005931484,0.000007999976,0.000007689804,0.000025297453,0.00008195155,0.00003637109,0.0007222209],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99990165,0.0000066398975,0.000008210806,0.00003342036,0.00003199042,0.000018112636],"domain_scores_gemma":[0.9997174,0.000077347104,0.0001095549,0.00002971714,0.00003361941,0.000032424137],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00014222733,0.00029765323,0.00013396844,0.00025211796,0.000106151965,0.0001675992,0.00014621823,0.00019513196,0.00039886884],"category_scores_gemma":[0.00023056958,0.00016263619,0.000209379,0.00014098428,0.0002012481,0.00021122799,0.00009328735,0.00023732168,0.00011139978],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012245659,0.0000056451004,0.00005544344,0.0000110456995,0.0000013126785,0.000020503883,0.000010560596,0.000067388006,0.999326,0.00001538976,0.0000036238994,0.0004709379],"study_design_scores_gemma":[9.988804e-7,0.00006159496,0.0011082415,0.0000010548912,0.0000028863374,0.000017344206,0.0000031944942,0.00045915841,0.99823594,0.0000027992473,0.00010521152,0.0000015793803],"about_ca_topic_score_codex":0.00031890156,"about_ca_topic_score_gemma":0.0008587578,"teacher_disagreement_score":0.00039886884,"about_ca_system_score_codex":0.00014656372,"about_ca_system_score_gemma":0.000084415435,"threshold_uncertainty_score":0.0013343692},"labels":[],"label_agreement":null},{"id":"W2800386581","doi":"10.1063/1.5027617","title":"Nonlinear core deflection in injection molding","year":2018,"lang":"en","type":"article","venue":"Physics of Fluids","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Queen's University","funders":"Natural Sciences and Engineering Research Council of Canada; King Mongkut's University of Technology North Bangkok; Thailand Research Fund","keywords":"Deflection (physics); Physics; Boundary value problem; Nonlinear system; Core (optical fiber); Mechanics; Differential equation; Mathematical analysis; Ordinary differential equation; Classical mechanics; Mathematics; Optics","score_opus":0.030682712533793215,"score_gpt":0.26076929161864115,"score_spread":0.23008657908484795,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2800386581","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7041885,0.00056593487,0.2729128,0.00035504968,0.000082369275,0.00008404065,0.000047426987,0.00055510865,0.021208743],"genre_scores_gemma":[0.9824348,0.000119320284,0.015024851,0.000040061925,0.000008225972,0.000012217918,0.000014614469,0.000030143065,0.0023156905],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998872,0.00001215787,0.0000031067193,0.00001515421,0.000062699575,0.000019619814],"domain_scores_gemma":[0.99983263,0.00009601256,0.000021370692,0.000017700713,0.000022724655,0.0000095015275],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00017718876,0.00022324346,0.00020426935,0.00012246339,0.00023133124,0.00029864383,0.00035331614,0.00043804583,0.00093059754],"category_scores_gemma":[0.0006666397,0.00017523253,0.00013574245,0.000118133365,0.0007267337,0.00043045552,0.00044260352,0.0003718398,0.00016842729],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00023014423,0.00011274847,0.0022677032,0.00019588294,0.000011820239,0.00044134478,0.00043485785,0.32612017,0.5955855,0.03271761,0.00086273445,0.041019436],"study_design_scores_gemma":[0.000019245503,0.000043308664,0.00046256298,0.000009353159,0.000002387357,0.00006922942,0.00001695288,0.9304403,0.06592762,0.0020486556,0.0009477369,0.000012646535],"about_ca_topic_score_codex":0.0014972592,"about_ca_topic_score_gemma":0.0016782609,"teacher_disagreement_score":0.0014972592,"about_ca_system_score_codex":0.0005739169,"about_ca_system_score_gemma":0.00028900185,"threshold_uncertainty_score":0.0041640997},"labels":[],"label_agreement":null},{"id":"W2894498520","doi":"10.3390/nano8100779","title":"Effect of Hybrid Carbon Fillers on the Electrical and Morphological Properties of Polystyrene Nanocomposites in Microinjection Molding","year":2018,"lang":"en","type":"article","venue":"Nanomaterials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University; Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Composite material; Carbon nanotube; Polystyrene; Carbon black; Mold; Shearing (physics); Nanocomposite; Molding (decorative); Scanning electron microscope; Annealing (glass); Polymer","score_opus":0.009827424760368417,"score_gpt":0.20345552833869665,"score_spread":0.19362810357832824,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2894498520","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9977969,0.00040117576,0.0011242998,0.000012053454,0.000010139365,0.0000145200365,0.000058240887,0.0000683821,0.00051431113],"genre_scores_gemma":[0.9970144,0.00028291374,0.0019706413,0.000011735699,0.000004498009,0.000015651309,0.00006743029,0.000023251449,0.000609455],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999892,0.0000110418105,0.000010953406,0.00003369295,0.000031919717,0.000020333338],"domain_scores_gemma":[0.99980897,0.00005200739,0.00006566656,0.000015505504,0.00002553392,0.000032382977],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00012735439,0.00037341507,0.0001755446,0.00019087012,0.000109612534,0.00023697957,0.00013025831,0.0001851666,0.00055270566],"category_scores_gemma":[0.00020041704,0.00019334807,0.00019101177,0.00011728292,0.00014622477,0.000182169,0.000106880325,0.00024213216,0.00013035658],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000017219092,0.000006429483,0.00003481933,0.000014117755,0.0000017452038,0.000011387552,0.0000067952155,0.000042583455,0.9994911,0.000010118276,0.0000028269726,0.0003607721],"study_design_scores_gemma":[9.621702e-7,0.00006424527,0.0007188247,0.0000013030409,0.0000048847887,0.000010554506,0.0000037404718,0.0002708526,0.9988201,0.0000022113827,0.0001006742,0.0000016653278],"about_ca_topic_score_codex":0.00045693223,"about_ca_topic_score_gemma":0.0011515855,"teacher_disagreement_score":0.00055270566,"about_ca_system_score_codex":0.00017081398,"about_ca_system_score_gemma":0.00009984973,"threshold_uncertainty_score":0.0018489957},"labels":[],"label_agreement":null},{"id":"W2900961893","doi":"10.1002/pen.24939","title":"Numerical simulation of suction blow molding process for producing curved ducts","year":2018,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Blow molding; Materials science; Mold; Mechanics; Composite material; Thermoforming; Deformation (meteorology); Molding (decorative); Viscoelasticity; Physics","score_opus":0.020082703027772947,"score_gpt":0.2596179768388199,"score_spread":0.23953527381104692,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2900961893","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.91066986,0.0005557744,0.05453557,0.00043590087,0.00014726429,0.00015916629,0.00085679285,0.00047848056,0.032161213],"genre_scores_gemma":[0.9842343,0.00015512049,0.01212948,0.000026051466,0.000008476342,0.000083199644,0.00022166438,0.000027972288,0.0031137003],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99988425,0.000024341665,0.000007313895,0.000014531441,0.000035404857,0.00003424949],"domain_scores_gemma":[0.9995615,0.0002520582,0.000057417386,0.000023413091,0.00006447366,0.000041092037],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026579938,0.00045136438,0.00056776736,0.0004699113,0.00057679147,0.0006524822,0.0005719196,0.0011595732,0.003160772],"category_scores_gemma":[0.0008579975,0.00024067776,0.00046548544,0.0004573142,0.0005143684,0.00035557503,0.00038571723,0.00043593923,0.00018377214],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006335821,0.00005174388,0.0019587174,0.000055920413,0.00000970562,0.00016038536,0.00006188887,0.99009037,0.003152757,0.0017434214,0.00029825146,0.0023533776],"study_design_scores_gemma":[0.000007809824,0.000018303335,0.00026556442,0.000003533739,0.0000019163433,0.000007914766,0.000017079677,0.99877435,0.0005295587,0.0001424588,0.00022858287,0.0000029104804],"about_ca_topic_score_codex":0.011480432,"about_ca_topic_score_gemma":0.0074465224,"teacher_disagreement_score":0.011480432,"about_ca_system_score_codex":0.00064738194,"about_ca_system_score_gemma":0.00077140424,"threshold_uncertainty_score":0.022827208},"labels":[],"label_agreement":null},{"id":"W2906445763","doi":"10.17265/2159-5275/2018.06.003","title":"Design of Hard Compaction Rollers for Automated Fiber Placement on Complex Mandrel Geometries","year":2018,"lang":"en","type":"article","venue":"Journal of Mechanics Engineering and Automation","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Concordia University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mandrel; Compaction; Materials science; Fiber; Mechanical engineering; Structural engineering; Engineering; Engineering drawing; Computer science; Composite material","score_opus":0.03433655769942027,"score_gpt":0.23959640599528872,"score_spread":0.20525984829586846,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2906445763","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.07098508,0.0001001262,0.9235388,0.000042503907,0.000021482205,0.00012498193,0.000035357454,0.0003866651,0.004765029],"genre_scores_gemma":[0.58599,0.000129803,0.41073075,0.000023919014,0.00001888627,0.00012467125,0.00005084802,0.00010594384,0.0028251125],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997845,0.000040233925,0.000010789909,0.00004422795,0.000093040515,0.000027048744],"domain_scores_gemma":[0.9996805,0.00011828959,0.00009619041,0.000047485108,0.00004066473,0.000016927235],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003265444,0.00056422927,0.00040657836,0.0002835493,0.00026783498,0.00042659402,0.00067935133,0.00042490932,0.0020287752],"category_scores_gemma":[0.00064777996,0.00032479642,0.00029512367,0.00012978629,0.00034634175,0.00036236254,0.0004331756,0.00033678097,0.0003484961],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00018979382,0.00008769614,0.0012111692,0.00038725563,0.00004165735,0.00036748935,0.0002517589,0.59399736,0.24696296,0.015130233,0.00091946195,0.14045307],"study_design_scores_gemma":[0.000060682123,0.00078021234,0.001273267,0.000031590527,0.000035469406,0.000252135,0.00009449176,0.91926545,0.063850455,0.0028008309,0.011523541,0.000031883443],"about_ca_topic_score_codex":0.00033917534,"about_ca_topic_score_gemma":0.00090150733,"teacher_disagreement_score":0.0020287752,"about_ca_system_score_codex":0.00024341403,"about_ca_system_score_gemma":0.00033018013,"threshold_uncertainty_score":0.006786883},"labels":[],"label_agreement":null},{"id":"W2910074366","doi":"10.1002/app.47507","title":"Morphology and thermal expansion in large HDPE injection moldings","year":2019,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Government of British Columbia; Electronic Arts (Canada)","funders":"Simon Fraser University","keywords":"Materials science; Composite material; Scanning electron microscope; Differential scanning calorimetry; Thermomechanical analysis; Anisotropy; Crystallinity; Thermal expansion; Core (optical fiber); Molding (decorative); Spherulite (polymer physics); Glass transition; Optical microscope; Birefringence; Polymer; Optics","score_opus":0.005636362298365183,"score_gpt":0.20440975531812608,"score_spread":0.1987733930197609,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2910074366","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.998357,0.00007652053,0.0010725242,0.000002993107,0.0000024025442,0.000005894343,0.00004369479,0.000029004092,0.00040995717],"genre_scores_gemma":[0.99834704,0.000036566573,0.0009640323,0.0000038128396,0.0000014127743,0.0000056954573,0.000050503026,0.000018694429,0.0005722648],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999509,0.0000039421197,0.0000024881804,0.000014976283,0.000018612245,0.000009091426],"domain_scores_gemma":[0.999853,0.00003873223,0.000053226096,0.00001404818,0.000020043777,0.000020928055],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00008577362,0.00013922286,0.00007931989,0.00019436987,0.000070187976,0.00023721559,0.00006574786,0.000090477326,0.00045935716],"category_scores_gemma":[0.00012599166,0.00010147286,0.0000737589,0.00008240383,0.0001712618,0.00014931796,0.00007994494,0.00015285853,0.00009680991],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003386896,0.0000067210585,0.0005480258,0.000006088798,0.0000010832383,0.00004329626,0.000019391447,0.00015941108,0.9981536,0.000027597209,0.00000803306,0.0009928772],"study_design_scores_gemma":[0.0000039855536,0.00012611107,0.021860382,0.0000024037945,0.000005046151,0.00009760036,0.00002732154,0.0012182797,0.9761704,0.000015434243,0.00046929152,0.0000038540334],"about_ca_topic_score_codex":0.00024536013,"about_ca_topic_score_gemma":0.00033018767,"teacher_disagreement_score":0.00045935716,"about_ca_system_score_codex":0.00015253646,"about_ca_system_score_gemma":0.000052553703,"threshold_uncertainty_score":0.0015366673},"labels":[],"label_agreement":null},{"id":"W2937268965","doi":"10.3139/9781569906361.006","title":"Microinjection Molding of Filler-Loaded Polymer Nanocomposites","year":2019,"lang":"en","type":"book-chapter","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Filler (materials); Molding (decorative); Polymer science; Materials science; Nanocomposite; Composite material","score_opus":0.011502115286032434,"score_gpt":0.18442455264110158,"score_spread":0.17292243735506915,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2937268965","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.46987343,0.017848052,0.11749676,0.0005716373,0.001818302,0.00041502673,0.0010051059,0.0077901306,0.38318172],"genre_scores_gemma":[0.702785,0.007595192,0.0417131,0.00019984959,0.00015106746,0.00015334928,0.00065372547,0.000923359,0.24582541],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99991786,0.000003065449,0.0000028846152,0.000020033398,0.000044966182,0.00001119064],"domain_scores_gemma":[0.99995303,0.000014463323,0.00001092602,0.000010008863,0.0000060636758,0.0000054835837],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00007802423,0.00031069553,0.00014626858,0.0003227588,0.00013766867,0.00034632246,0.00017670555,0.00018747324,0.007823221],"category_scores_gemma":[0.00009105385,0.00020745619,0.00023436721,0.00016880414,0.00014757902,0.00033934467,0.00022056852,0.00053934724,0.0030034361],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003026024,0.000050503746,0.000044276825,0.00018700534,0.0000036346466,0.00012590604,0.00005073585,0.0005459145,0.93990606,0.0016267507,0.0020725639,0.055356465],"study_design_scores_gemma":[0.000003794806,0.00008705799,0.00042226605,0.000015697742,0.000004951102,0.00015128519,0.000008652201,0.0022240262,0.9694857,0.00017063603,0.027419467,0.0000064906767],"about_ca_topic_score_codex":0.00021510298,"about_ca_topic_score_gemma":0.00080930314,"teacher_disagreement_score":0.007823221,"about_ca_system_score_codex":0.0002823144,"about_ca_system_score_gemma":0.00014329662,"threshold_uncertainty_score":0.026171327},"labels":[],"label_agreement":null},{"id":"W2943663204","doi":"10.1115/1.4043680","title":"Design of Conformal Porous Structures for the Cooling System of an Injection Mold Fabricated by Additive Manufacturing Process","year":2019,"lang":"en","type":"article","venue":"Journal of Mechanical Design","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mold; Conformal map; Molding (decorative); Materials science; Porosity; Pressure drop; Water cooling; Mechanical engineering; Composite material; Mechanics; Engineering; Geometry","score_opus":0.01885152493816628,"score_gpt":0.2285442000900862,"score_spread":0.20969267515191992,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2943663204","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.436995,0.00046905692,0.55146617,0.0001416261,0.000118182936,0.00018735876,0.00017202519,0.00053197466,0.009918556],"genre_scores_gemma":[0.9156207,0.00013563597,0.08344699,0.000013456548,0.000008621921,0.00006875571,0.000036385314,0.000019185896,0.00065021124],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998902,0.000012165271,0.000005038084,0.000025076068,0.00004728825,0.000020202406],"domain_scores_gemma":[0.99981266,0.000033323347,0.000062187726,0.000020186859,0.000058184218,0.000013523043],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00013864142,0.00023891247,0.00019653689,0.00032496892,0.00017603488,0.00029714144,0.00034749004,0.00025297445,0.00064697914],"category_scores_gemma":[0.00033773607,0.0001827832,0.00024103966,0.00020791758,0.00028483034,0.00020981186,0.00018453912,0.0001657471,0.00011494959],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009242867,0.00007701949,0.0011603888,0.00031238352,0.000029390903,0.00023570952,0.00008728999,0.09871423,0.8623538,0.01229925,0.00063484174,0.024003299],"study_design_scores_gemma":[0.00011656985,0.00070200255,0.0031846035,0.000033876364,0.000075144744,0.0004235059,0.00005262268,0.46330434,0.51972634,0.0011588153,0.0111657325,0.00005643614],"about_ca_topic_score_codex":0.00072557526,"about_ca_topic_score_gemma":0.00094667333,"teacher_disagreement_score":0.00072557526,"about_ca_system_score_codex":0.00037683558,"about_ca_system_score_gemma":0.00054867193,"threshold_uncertainty_score":0.0027341247},"labels":[],"label_agreement":null},{"id":"W2950451986","doi":"10.1063/1.5100257","title":"A simplified semi-analytical model for the filling and cooling process in plastic molding","year":2019,"lang":"en","type":"article","venue":"Physics of Fluids","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Husky Injection Molding Systems (Canada); Université Laval","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Molding (decorative); Blow molding; Mechanics; Mold; Thermal; Process (computing); Lubrication; Mechanical engineering; Composite material; Physics; Materials science; Thermodynamics; Engineering; Computer science","score_opus":0.02784675110429416,"score_gpt":0.2552287221284763,"score_spread":0.22738197102418214,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2950451986","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.049869597,0.0016712405,0.90924335,0.00056980085,0.00023257254,0.00029952463,0.0011091072,0.00080329896,0.036201462],"genre_scores_gemma":[0.84590083,0.0025428475,0.083716825,0.00024174115,0.0001457408,0.0013566084,0.0007846338,0.00029197393,0.06501882],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997105,0.000054630706,0.000015180024,0.00006316492,0.0001179598,0.000038541017],"domain_scores_gemma":[0.99969614,0.00013733658,0.000049939365,0.000025260078,0.000074697884,0.000016606395],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00034135656,0.0008399372,0.001211476,0.00054155383,0.0007243107,0.0011641313,0.0021361196,0.0025442906,0.004476212],"category_scores_gemma":[0.00087456184,0.000677538,0.0010715858,0.00072495214,0.0009469863,0.0011388335,0.0006447149,0.00096936215,0.0011797386],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000026746342,0.000030972024,0.00019270227,0.0001707399,0.000009400335,0.00013263547,0.000095381445,0.97520995,0.006557222,0.013732256,0.0004712477,0.0033707104],"study_design_scores_gemma":[0.0000071181043,0.000011192414,0.00006862262,0.0000054751877,0.0000035173584,0.000027648759,0.000005606097,0.99758255,0.000485888,0.0009173768,0.0008790693,0.0000058861538],"about_ca_topic_score_codex":0.008012494,"about_ca_topic_score_gemma":0.003455457,"teacher_disagreement_score":0.008012494,"about_ca_system_score_codex":0.0009718936,"about_ca_system_score_gemma":0.0013886893,"threshold_uncertainty_score":0.015931726},"labels":[],"label_agreement":null},{"id":"W2952401611","doi":"10.1002/pen.25154","title":"Properties of microinjection‐molded polypropylene/graphite composites","year":2019,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University; Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Graphite; Polypropylene; Composite material; Differential scanning calorimetry; Molding (decorative); Shearing (physics); Crystallization; Exfoliation joint; Electrical conductor; Chemical engineering","score_opus":0.005906841646750418,"score_gpt":0.16539705662379842,"score_spread":0.159490214977048,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2952401611","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9967064,0.00046453654,0.0019174556,0.000015723299,0.00001953902,0.000012179073,0.00012014869,0.0000746712,0.00066936243],"genre_scores_gemma":[0.997666,0.00016846122,0.0014143212,0.000010528987,0.0000041302947,0.000011183747,0.00008723232,0.000025689656,0.00061247963],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998586,0.0000104397695,0.000009155362,0.000033224856,0.000068784306,0.000019794637],"domain_scores_gemma":[0.9997154,0.00007374152,0.00008770369,0.00003302463,0.000054070202,0.000036005156],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001507858,0.00031065076,0.00016870325,0.0003295596,0.0001537489,0.00024034317,0.0001142756,0.0002865351,0.0006197689],"category_scores_gemma":[0.00033322474,0.00021723144,0.00022170242,0.0001930145,0.00019118196,0.0002582683,0.00011574472,0.00034753958,0.00020475118],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000044113916,0.000007693857,0.00016416542,0.00002634773,0.0000034574841,0.000043152882,0.000018564426,0.00018305736,0.9984382,0.000020258245,0.000010467467,0.0010405569],"study_design_scores_gemma":[0.000002685704,0.0000960415,0.0038810458,0.000002771692,0.000007820404,0.000065939465,0.000011244093,0.00068816904,0.99495304,0.000007763283,0.0002781567,0.00000522127],"about_ca_topic_score_codex":0.00031578686,"about_ca_topic_score_gemma":0.0007606018,"teacher_disagreement_score":0.0006197689,"about_ca_system_score_codex":0.00016563051,"about_ca_system_score_gemma":0.00010688685,"threshold_uncertainty_score":0.0020733476},"labels":[],"label_agreement":null},{"id":"W2969914493","doi":"10.1007/s11665-019-04276-9","title":"Effect of Powder Shape and Size on Rheological, Thermal, and Segregation Properties of Low-Pressure Powder Injection Molding Feedstocks","year":2019,"lang":"en","type":"article","venue":"Journal of Materials Engineering and Performance","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Mitacs","keywords":"Materials science; Raw material; Viscosity; Rheology; Thermogravimetric analysis; Particle size; Molding (decorative); Composite material; Rheometer; Viscometer; Volume (thermodynamics); Volume fraction; Differential scanning calorimetry; Chemical engineering; Thermodynamics","score_opus":0.005490866233555554,"score_gpt":0.18090836156592852,"score_spread":0.17541749533237297,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2969914493","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99922776,0.00010342947,0.00020915615,0.00001245589,0.0000069829243,0.0000034107272,0.00005983778,0.000013843923,0.0003630751],"genre_scores_gemma":[0.9992931,0.00007114861,0.00020670454,0.000010318514,0.000002519379,0.000003192176,0.000062658975,0.0000138528585,0.00033652177],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99980384,0.00002573604,0.000024544954,0.000043545842,0.0000630602,0.0000392482],"domain_scores_gemma":[0.99937266,0.00030104877,0.000121480625,0.00004659105,0.00009275638,0.00006543914],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022356256,0.00023980596,0.00021909607,0.00021583209,0.0001602074,0.00036070985,0.00020204407,0.00022165952,0.0012495457],"category_scores_gemma":[0.0008533701,0.00022276209,0.00020299065,0.00024522634,0.00023135486,0.00037438283,0.00015158833,0.00036600066,0.0002688171],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0008384216,0.00006942687,0.0010598758,0.00003115135,0.000009315772,0.00006582444,0.000030172541,0.00046113518,0.9945425,0.000030961764,0.000035486766,0.0028257128],"study_design_scores_gemma":[0.00001136697,0.00023291113,0.003170713,0.0000016174183,0.000010569224,0.000020693815,0.000015480513,0.0010536838,0.99536574,0.000007270345,0.00010541537,0.0000044414683],"about_ca_topic_score_codex":0.00072075974,"about_ca_topic_score_gemma":0.0013723896,"teacher_disagreement_score":0.0012495457,"about_ca_system_score_codex":0.00022325454,"about_ca_system_score_gemma":0.00018026453,"threshold_uncertainty_score":0.004180193},"labels":[],"label_agreement":null},{"id":"W2973205641","doi":"10.23919/acc.2019.8814611","title":"Data-Driven Control of Rotational Molding Process","year":2019,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University","funders":"","keywords":"Model predictive control; Control theory (sociology); Trajectory; Process (computing); Quality (philosophy); Process control; Computer science; State-space representation; Control (management); Physics; Algorithm","score_opus":0.020456241271906327,"score_gpt":0.2430563940311401,"score_spread":0.22260015275923378,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2973205641","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.034405705,0.00027899904,0.9593311,0.00021277924,0.00006671341,0.000088142275,0.0001985402,0.00048746724,0.004930598],"genre_scores_gemma":[0.9760401,0.0001718149,0.021645898,0.000033282304,0.000020635895,0.00014044778,0.00015587467,0.000035100195,0.0017569666],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9993874,0.00010142543,0.00003099579,0.00017336041,0.00024303934,0.000063743144],"domain_scores_gemma":[0.9994006,0.00022052506,0.00016307802,0.00003947964,0.0001551925,0.00002107646],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009041292,0.0010034364,0.0007472297,0.00030318694,0.00035060834,0.001174886,0.0009785319,0.0004933867,0.001271037],"category_scores_gemma":[0.0012335934,0.00038985373,0.0005590165,0.00026568156,0.0006738992,0.0006007101,0.00086680613,0.0009016392,0.00023795974],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000068619345,0.000030104718,0.00021891885,0.00009458754,0.000013660263,0.000040690407,0.000040934916,0.97926384,0.00509064,0.005080089,0.00023795392,0.009819926],"study_design_scores_gemma":[0.000007029605,0.000035010868,0.000081131286,0.0000030645765,0.0000029508813,0.0000035317153,0.0000021617868,0.99759525,0.0012257867,0.0007326271,0.00030790103,0.0000034986413],"about_ca_topic_score_codex":0.0071581844,"about_ca_topic_score_gemma":0.0044174576,"teacher_disagreement_score":0.0071581844,"about_ca_system_score_codex":0.0007939186,"about_ca_system_score_gemma":0.0011097942,"threshold_uncertainty_score":0.014233053},"labels":[],"label_agreement":null},{"id":"W2992706217","doi":"10.1002/pat.4819","title":"Simulation of crystallization evolution of polyoxymethylene during microinjection molding cycle","year":2019,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"","keywords":"Polyoxymethylene; Materials science; Molding (decorative); Crystallization; Dissipation; Thermal; Mechanics; Work (physics); Interconnectivity; Crystallinity; Parametric statistics; Composite material; Phase (matter); Mechanical engineering; Thermodynamics; Polymer; Computer science","score_opus":0.005359157826418616,"score_gpt":0.21505227295420182,"score_spread":0.20969311512778321,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2992706217","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.92488104,0.0001927847,0.059279077,0.00025532785,0.00004482744,0.00008314205,0.00037223657,0.00026271504,0.01462885],"genre_scores_gemma":[0.99163944,0.00007892138,0.0056981477,0.000019196763,0.0000033670278,0.00008681096,0.000088918794,0.000019178648,0.002366058],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999387,0.000009867928,0.000002580665,0.000010053923,0.00001761072,0.00002112422],"domain_scores_gemma":[0.9997309,0.00016284172,0.00004056606,0.00001418466,0.000029456905,0.000022108517],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00018653322,0.0003358342,0.00040963228,0.0002771782,0.00037643433,0.0004600732,0.0005011339,0.001088416,0.001997261],"category_scores_gemma":[0.00052967103,0.00025201633,0.00052999146,0.00022794245,0.0004919816,0.0002953612,0.00027469787,0.0004363554,0.0001032688],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000037753973,0.000028005607,0.0007990433,0.000030868752,0.000007950859,0.00007374583,0.0000307181,0.9909422,0.0055746445,0.0014455129,0.00007231994,0.00095732464],"study_design_scores_gemma":[0.0000046716077,0.000017369066,0.00023745895,0.0000020044831,0.000002000587,0.0000061386863,0.000006233775,0.99864537,0.0008998261,0.000088791945,0.00008788019,0.0000023180894],"about_ca_topic_score_codex":0.009497925,"about_ca_topic_score_gemma":0.004389168,"teacher_disagreement_score":0.009497925,"about_ca_system_score_codex":0.00066098495,"about_ca_system_score_gemma":0.0006531725,"threshold_uncertainty_score":0.018885255},"labels":[],"label_agreement":null},{"id":"W2999400887","doi":"10.3390/jcs4010010","title":"A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II—Applications","year":2020,"lang":"en","type":"article","venue":"Journal of Composites Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Dimensionless quantity; Composite number; Materials science; Mold; Molding (decorative); Composite material; Fabrication; Aerospace; Automotive industry; Viscosity; Mechanical engineering; Engineering; Mechanics; Physics","score_opus":0.024978717502008613,"score_gpt":0.2536551895416073,"score_spread":0.2286764720395987,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2999400887","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.010208989,0.001598944,0.982357,0.00008506488,0.0001648213,0.00018540477,0.000038650163,0.0002884346,0.005072747],"genre_scores_gemma":[0.27474847,0.00237388,0.7172296,0.00008326103,0.00018144929,0.0007228168,0.00012053906,0.00028744884,0.004252521],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999159,0.0002610403,0.00006208795,0.00011908665,0.00036939204,0.00002944014],"domain_scores_gemma":[0.998459,0.0008294753,0.00030595495,0.0001762325,0.00020781725,0.000021638392],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0012127674,0.0008929779,0.0004717188,0.00099453,0.00036253614,0.0008499228,0.000773253,0.0007889384,0.0020597912],"category_scores_gemma":[0.004200987,0.00039816578,0.00044400222,0.0012371889,0.0010329915,0.0010259867,0.00045538667,0.0009486918,0.00059738633],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00018629432,0.00018178699,0.0026302938,0.0011799649,0.000025860769,0.00032571593,0.0004792979,0.29466993,0.2114801,0.13400678,0.003979629,0.35085425],"study_design_scores_gemma":[0.000026843805,0.00058224914,0.0020970595,0.00017604539,0.000029946941,0.0004776296,0.0000755026,0.7942757,0.102963544,0.022358717,0.07683146,0.000105244784],"about_ca_topic_score_codex":0.0003406605,"about_ca_topic_score_gemma":0.000326806,"teacher_disagreement_score":0.0020597912,"about_ca_system_score_codex":0.000978819,"about_ca_system_score_gemma":0.00068323896,"threshold_uncertainty_score":0.007101834},"labels":[],"label_agreement":null},{"id":"W3013564592","doi":"10.1299/jsmemecj.2019.f11103","title":"On Ultra-compact Gear Manufactured by Micro Metal Powder Injection Molding","year":2019,"lang":"en","type":"article","venue":"The Proceedings of Mechanical Engineering Congress Japan","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Microsemi (Canada)","funders":"","keywords":"Molding (decorative); Materials science; Mold; Composite material; Metallurgy","score_opus":0.0063893495402361205,"score_gpt":0.19283916672838083,"score_spread":0.1864498171881447,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3013564592","genre_codex":"empirical","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.90911406,0.001917547,0.083870776,0.000045386365,0.00008815401,0.000066874345,0.00012448378,0.0005537085,0.004219016],"genre_scores_gemma":[0.94191486,0.0004026971,0.05569609,0.000012246241,0.000014258157,0.000018161656,0.000110991656,0.000037916157,0.0017927202],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.9995372,0.000016930766,0.000024662302,0.000057343103,0.00034051947,0.000023345345],"domain_scores_gemma":[0.9996656,0.00006345164,0.00010356018,0.000089049725,0.00006237232,0.000016034124],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00033595058,0.00022090819,0.00034182108,0.0004988113,0.000121875906,0.00020953658,0.0003313791,0.00018928936,0.00071171584],"category_scores_gemma":[0.0004976438,0.00016605937,0.0002171979,0.00032352775,0.00024667557,0.00030269768,0.00026451715,0.00015548816,0.00025857083],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000080802674,0.000021838776,0.0029245708,0.00020455333,0.000007968666,0.0001570586,0.000098617515,0.001623106,0.9334721,0.00081639027,0.00016104126,0.06043187],"study_design_scores_gemma":[0.000031119034,0.0010862646,0.033648696,0.00002943522,0.000047609967,0.0016718314,0.00004663303,0.019423451,0.93272895,0.0002548717,0.011002086,0.000028953895],"about_ca_topic_score_codex":0.00022963979,"about_ca_topic_score_gemma":0.0004313563,"teacher_disagreement_score":0.00071171584,"about_ca_system_score_codex":0.00013166605,"about_ca_system_score_gemma":0.00013377798,"threshold_uncertainty_score":0.0023809075},"labels":[],"label_agreement":null},{"id":"W3027703770","doi":"10.1520/mpc20190149","title":"Threshold Concentration of Surfactant Agent in Feedstocks Used for Low-Pressure Powder Injection Molding","year":2020,"lang":"en","type":"article","venue":"Materials Performance and Characterization","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Materials science; Pulmonary surfactant; Molding (decorative); Composite material; Chemical engineering","score_opus":0.015243122727734773,"score_gpt":0.20259526571505077,"score_spread":0.187352142987316,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3027703770","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99332315,0.0008615461,0.004833511,0.000019786288,0.00001908288,0.00007162651,0.00011372571,0.000092318434,0.0006653583],"genre_scores_gemma":[0.9929558,0.0004635131,0.0058986684,0.000013335346,0.000004517034,0.000051988885,0.0001447097,0.00003412992,0.00043334631],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9994485,0.0000859125,0.000087662294,0.00011401416,0.00019443408,0.00006949105],"domain_scores_gemma":[0.99948967,0.00016396277,0.00017202974,0.000048348793,0.0000840412,0.000041916723],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00034142213,0.0005172515,0.0003813815,0.0003657873,0.00015391671,0.0005185298,0.00031172863,0.0003963745,0.00070131273],"category_scores_gemma":[0.0008274071,0.00019951252,0.00026184358,0.00029276457,0.00024355935,0.0004000268,0.0002126439,0.0004937746,0.00022065475],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004111941,0.000015959127,0.0001674024,0.00002509043,0.000003192663,0.000017092965,0.000008009241,0.000072664945,0.9989594,0.000017503236,0.0000032032883,0.0006692974],"study_design_scores_gemma":[0.0000017860723,0.00008012454,0.00038063037,0.000002294548,0.0000049509895,0.000006677366,0.000003952784,0.00019356134,0.99922717,0.0000036142194,0.000094071846,0.0000011651981],"about_ca_topic_score_codex":0.00074488384,"about_ca_topic_score_gemma":0.0011361596,"teacher_disagreement_score":0.00074488384,"about_ca_system_score_codex":0.000335879,"about_ca_system_score_gemma":0.000254846,"threshold_uncertainty_score":0.002436936},"labels":[],"label_agreement":null},{"id":"W3040622894","doi":"10.1177/0021998320938454","title":"Injection molding of short fiber thermoplastic bio-composites: Prediction of the fiber orientation","year":2020,"lang":"en","type":"article","venue":"Journal of Composite Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":17,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université Laval","funders":"","keywords":"Materials science; Composite material; Molding (decorative); Fiber; Mold; Thermoplastic; Rheology; Orientation (vector space); Anisotropy; Compression molding; Aspect ratio (aeronautics); Thermoplastic composites; Flow (mathematics); Geometry; Optics; Mathematics","score_opus":0.016297516448225257,"score_gpt":0.21082928583676205,"score_spread":0.1945317693885368,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3040622894","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.86203676,0.00016582456,0.13661927,0.000018159755,0.000014955484,0.000029325849,0.000102650534,0.0004490643,0.000563971],"genre_scores_gemma":[0.9785765,0.00011466691,0.020897593,0.0000024025255,0.0000019004726,0.000011530704,0.00005454509,0.000021954193,0.00031888514],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99995077,0.0000063177968,0.0000026158846,0.00001192195,0.000023600576,0.0000047294425],"domain_scores_gemma":[0.9997931,0.000097118165,0.00006076277,0.000019489375,0.000018570092,0.000010977639],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016853846,0.0003788354,0.00014223695,0.00023233323,0.00006880866,0.00015356459,0.0001517804,0.0002383371,0.0004622344],"category_scores_gemma":[0.0003159648,0.00016390969,0.000166912,0.00012792728,0.00016683101,0.00015423493,0.00007626928,0.00021087521,0.000115245275],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002145671,0.00006557352,0.0038269754,0.0000714804,0.000008014771,0.000060277725,0.000047620342,0.07950763,0.889869,0.00021421259,0.00005698501,0.026057675],"study_design_scores_gemma":[0.0000045196175,0.00010651188,0.003872188,0.000004285949,0.0000060666794,0.000031064166,0.0000075146468,0.37003812,0.62568855,0.000058214213,0.00017505109,0.000007985549],"about_ca_topic_score_codex":0.000995725,"about_ca_topic_score_gemma":0.0014655266,"teacher_disagreement_score":0.000995725,"about_ca_system_score_codex":0.00020586074,"about_ca_system_score_gemma":0.00021206422,"threshold_uncertainty_score":0.0019798279},"labels":[],"label_agreement":null},{"id":"W3047717235","doi":"10.4325/seikeikakou.22.385","title":"The Surface Quality of Low-Pressure Injection Molded Articles Obtained by a Cavity/Core Mold Pair Given a Difference in Temperature and/or Surface Roughness","year":2010,"lang":"en","type":"article","venue":"Seikei-Kakou","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Barrick Gold (Canada)","funders":"","keywords":"Mold; Materials science; Core (optical fiber); Surface roughness; Molding (decorative); Composite material; Surface (topology); Surface finish; Significant difference","score_opus":0.016774022186018846,"score_gpt":0.24293169543744475,"score_spread":0.2261576732514259,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3047717235","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99542326,0.00018797422,0.0030875627,0.000017272605,0.00001611403,0.000013480402,0.00007295134,0.000050088634,0.0011313098],"genre_scores_gemma":[0.99669397,0.00009262924,0.002005096,0.000012397401,0.0000035813096,0.000008180082,0.00009812228,0.00004652727,0.0010395478],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998323,0.000016742686,0.0000107357355,0.00003407023,0.0000730321,0.000033040207],"domain_scores_gemma":[0.9994947,0.00014263442,0.000107123284,0.00007453967,0.00012445862,0.00005647311],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00027452374,0.00023187383,0.0001687171,0.00028986446,0.00016108081,0.0003909192,0.000134233,0.00028395103,0.0014722898],"category_scores_gemma":[0.0006021928,0.0001630284,0.00023444497,0.00023302318,0.00027738756,0.00029591986,0.00014519165,0.0004645167,0.0002511238],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003477458,0.000007378391,0.00033437493,0.000014897328,0.000002627356,0.000029025006,0.000023873521,0.000048575996,0.9983217,0.000025586942,0.000010836755,0.0011463395],"study_design_scores_gemma":[0.000003609016,0.00019848291,0.0076452987,0.0000017683394,0.000009928794,0.0000735009,0.000026356312,0.00045933644,0.99133694,0.000014642758,0.00022594555,0.000004096624],"about_ca_topic_score_codex":0.00027267795,"about_ca_topic_score_gemma":0.0005465486,"teacher_disagreement_score":0.0014722898,"about_ca_system_score_codex":0.00013066771,"about_ca_system_score_gemma":0.00009483275,"threshold_uncertainty_score":0.0049253106},"labels":[],"label_agreement":null},{"id":"W3081813012","doi":"10.1115/1.4048268","title":"Effect of Binder Constituents and Solids Loading on the Rheological Behavior of Irregular Iron-Based Feedstocks","year":2020,"lang":"en","type":"article","venue":"Journal of Manufacturing Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":10,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Rio Tinto (Canada); École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Wax; Materials science; Paraffin wax; Raw material; Rheology; Rheometer; Composite material; Molding (decorative); Pulmonary surfactant; Viscosity; Carnauba wax; Stearic acid; Chemical engineering; Chemistry; Organic chemistry","score_opus":0.011964327972733219,"score_gpt":0.2097160485517801,"score_spread":0.19775172057904689,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3081813012","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99899167,0.00014137418,0.0004976523,0.000004576729,0.0000032583469,0.000012649909,0.00004199096,0.000011711665,0.000295244],"genre_scores_gemma":[0.99819714,0.00016529368,0.001268284,0.0000055537867,0.0000018426657,0.000010661934,0.00005716397,0.000009744327,0.0002844054],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996904,0.000055754066,0.00003861058,0.000051451592,0.00012074838,0.000043034826],"domain_scores_gemma":[0.999645,0.00012794933,0.00010282489,0.00003234131,0.00006040989,0.00003144502],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00031305515,0.00034924375,0.00028522138,0.0002706342,0.0001444158,0.00030493815,0.00016371631,0.00015914589,0.000675687],"category_scores_gemma":[0.00060833996,0.00014697404,0.0001492771,0.00027293988,0.00025058878,0.0002467273,0.00016588354,0.00034592432,0.0001420747],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00015373058,0.000037538986,0.00047800448,0.00003012226,0.0000049250866,0.000018417179,0.000022776821,0.00018782048,0.99767655,0.0000108253835,0.0000037213217,0.0013755203],"study_design_scores_gemma":[0.0000025835388,0.00025117147,0.0019803809,0.0000020321486,0.000007716908,0.000010483779,0.000012463315,0.00036307413,0.99725133,0.0000031254056,0.00011366656,0.0000019980573],"about_ca_topic_score_codex":0.0005912275,"about_ca_topic_score_gemma":0.0014008804,"teacher_disagreement_score":0.000675687,"about_ca_system_score_codex":0.00019839748,"about_ca_system_score_gemma":0.00015442669,"threshold_uncertainty_score":0.002260387},"labels":[],"label_agreement":null},{"id":"W3087187822","doi":"10.1002/app.49879","title":"Motion control for uniaxial rotational molding","year":2020,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Queen's University","keywords":"Rotational speed; Materials science; Mixing (physics); Mold; Rotation around a fixed axis; Molding (decorative); Rotation (mathematics); Composite material; Flow (mathematics); Volumetric flow rate; Mechanical engineering; Mechanics; Computer science","score_opus":0.014930203667352464,"score_gpt":0.21661745970482169,"score_spread":0.20168725603746923,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3087187822","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.76177067,0.00083318196,0.22684704,0.0001316057,0.000097515316,0.00019008509,0.00013220447,0.00079921464,0.00919847],"genre_scores_gemma":[0.9842892,0.00011342308,0.013806774,0.000008741271,0.0000056144663,0.000028099896,0.000042144657,0.000014784548,0.0016912274],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9998615,0.000019635185,0.000013498707,0.000027296757,0.000059404843,0.000018793486],"domain_scores_gemma":[0.99975103,0.00006407528,0.00010021257,0.000031872085,0.00004255295,0.000010216098],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00023229401,0.00031788772,0.00014402387,0.0001568317,0.00016660288,0.0002292904,0.00025415688,0.00011778299,0.0024888406],"category_scores_gemma":[0.00051697105,0.00008626999,0.00010320246,0.00011334327,0.00019529725,0.00017780192,0.00019127366,0.00015998467,0.00024613662],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000668837,0.00012845025,0.0008760437,0.0002911636,0.00000836512,0.000089288376,0.00009569685,0.01990873,0.86708325,0.0029885282,0.00044774194,0.10741389],"study_design_scores_gemma":[0.00010716667,0.0017335762,0.007783526,0.000030296811,0.000025617725,0.00014110847,0.000033274693,0.21760094,0.7605593,0.000488714,0.0114570595,0.00003941111],"about_ca_topic_score_codex":0.0008563714,"about_ca_topic_score_gemma":0.0011153559,"teacher_disagreement_score":0.0024888406,"about_ca_system_score_codex":0.00021622263,"about_ca_system_score_gemma":0.00013166328,"threshold_uncertainty_score":0.008326054},"labels":[],"label_agreement":null},{"id":"W3095946254","doi":"10.1115/detc2020-22150","title":"Machine Learning Aided Design and Optimization of Conformal Porous Structures","year":2020,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McGill University","funders":"","keywords":"Conformal map; Molding (decorative); Porosity; Variance (accounting); Computer science; Surrogate model; Machine learning; Process (computing); Water cooling; Materials science; Artificial intelligence; Mechanical engineering; Mathematical optimization; Mathematics; Engineering; Mathematical analysis","score_opus":0.018232681219818078,"score_gpt":0.19257284220051912,"score_spread":0.17434016098070104,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3095946254","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.24574819,0.00035191805,0.7407902,0.00019244138,0.00005506502,0.00012100662,0.00015907173,0.0007430748,0.011839062],"genre_scores_gemma":[0.894849,0.00006943827,0.10299505,0.000037338476,0.000005921173,0.00012837666,0.00010283089,0.0000360692,0.0017759048],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99979085,0.000053102125,0.000006978382,0.000035369256,0.00007783511,0.000035787478],"domain_scores_gemma":[0.9995685,0.000257285,0.000052833686,0.000024633691,0.00008473095,0.000012039302],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004904131,0.00045208176,0.0005670716,0.00034239265,0.00017564725,0.00045849752,0.0004028065,0.000562634,0.0015736596],"category_scores_gemma":[0.00085125165,0.0003124442,0.00049415557,0.00026860138,0.0004450489,0.00020915095,0.00034323585,0.00048591252,0.00017419684],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000010687648,0.000014681608,0.00018730872,0.000018043605,0.000004560937,0.000016618553,0.0000046968576,0.99192166,0.0016178626,0.0005928654,0.00007666765,0.005534288],"study_design_scores_gemma":[0.000002689933,0.000012775584,0.000049322352,0.0000010695222,0.0000010379974,0.0000019383617,0.0000014647258,0.9992986,0.00042803359,0.00010416171,0.00009807443,7.9649965e-7],"about_ca_topic_score_codex":0.0032291722,"about_ca_topic_score_gemma":0.003376364,"teacher_disagreement_score":0.0032291722,"about_ca_system_score_codex":0.0004693602,"about_ca_system_score_gemma":0.0009120175,"threshold_uncertainty_score":0.0064207315},"labels":[],"label_agreement":null},{"id":"W3103735856","doi":"10.1115/detc2001/dfm-21187","title":"Design of an Evaluative Tool for a Multi-Station Injection Molding System Using an Evolutionary Algorithm","year":2001,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Toronto","funders":"","keywords":"Molding (decorative); Computer science; Conceptual design; Injection molding machine; Evolutionary algorithm; Genetic algorithm; Process (computing); Variety (cybernetics); Product (mathematics); Systems design; Algorithm; Engineering; Mechanical engineering; Artificial intelligence; Machine learning; Mathematics; Software engineering; Human–computer interaction","score_opus":0.10264160225631026,"score_gpt":0.31460017042043364,"score_spread":0.2119585681641234,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3103735856","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.049819563,0.00003611909,0.9455504,0.00006654211,0.000015218941,0.0003089634,0.00001974796,0.0009212788,0.003262254],"genre_scores_gemma":[0.5628178,0.00003645744,0.43346652,0.000036564477,0.0000072644884,0.0004990972,0.00003097389,0.000087471206,0.0030178025],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99960274,0.00012383024,0.000018982939,0.0000668668,0.00014625945,0.00004147663],"domain_scores_gemma":[0.9993309,0.0003290495,0.00008106808,0.000050581828,0.00017681786,0.00003161384],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0012179335,0.0005372859,0.00044183253,0.00045192344,0.0004121403,0.0007645328,0.00094722636,0.00078075944,0.004485047],"category_scores_gemma":[0.0018831769,0.00035146644,0.00027567334,0.00020704594,0.0004022434,0.0006603326,0.00037911558,0.0004550894,0.00037767374],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0004542213,0.0003485842,0.0017836085,0.00030575448,0.00006186085,0.00028236103,0.0002497979,0.6801457,0.10677432,0.012532426,0.0009647914,0.19609664],"study_design_scores_gemma":[0.000061518534,0.0002492045,0.000322761,0.000013556476,0.000023904711,0.000035033758,0.000019955123,0.98023635,0.016853822,0.00052211276,0.0016514234,0.000010254585],"about_ca_topic_score_codex":0.0010330043,"about_ca_topic_score_gemma":0.0008387115,"teacher_disagreement_score":0.004485047,"about_ca_system_score_codex":0.0005317065,"about_ca_system_score_gemma":0.0007184079,"threshold_uncertainty_score":0.015003979},"labels":[],"label_agreement":null},{"id":"W3107530477","doi":"10.4325/seikeikakou.31.97","title":"Screw Plasticating Technology for Injection Molding","year":2019,"lang":"en","type":"article","venue":"Seikei-Kakou","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Husky Injection Molding Systems (Canada)","funders":"","keywords":"Materials science; Molding (decorative); Composite material; Mechanical engineering; Engineering","score_opus":0.006335277506064935,"score_gpt":0.19729666751839076,"score_spread":0.19096139001232582,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3107530477","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.33086812,0.019575212,0.571829,0.00059044646,0.0012432071,0.00048077316,0.00087805535,0.0036414186,0.07089382],"genre_scores_gemma":[0.8166985,0.006292671,0.14301448,0.00018674329,0.00016657912,0.00018371349,0.0007273095,0.00044110607,0.032288983],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99965763,0.000026595304,0.000024189772,0.00006979998,0.0001864369,0.00003539795],"domain_scores_gemma":[0.9998536,0.000028083372,0.000040802184,0.000019012346,0.000048509,0.000009952826],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00024787273,0.0006886852,0.00031898456,0.0009289782,0.00044211923,0.0005226894,0.00056151405,0.00032020485,0.0039725923],"category_scores_gemma":[0.00024727342,0.00035023352,0.00046559813,0.00085141713,0.0003563887,0.00095912075,0.00031249426,0.00069753535,0.0012975297],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008109579,0.00004829625,0.00055684254,0.00035593478,0.000016078473,0.00016221116,0.00009178584,0.0008893704,0.928261,0.008192084,0.0011546044,0.060190685],"study_design_scores_gemma":[0.000010702557,0.00022514474,0.0010818467,0.000013820819,0.000030364843,0.00022197765,0.000019688281,0.0029114634,0.9689417,0.00035260792,0.026175622,0.000014926962],"about_ca_topic_score_codex":0.00053232873,"about_ca_topic_score_gemma":0.0010519435,"teacher_disagreement_score":0.0039725923,"about_ca_system_score_codex":0.0004363891,"about_ca_system_score_gemma":0.0005390412,"threshold_uncertainty_score":0.01328963},"labels":[],"label_agreement":null},{"id":"W3118454352","doi":"10.1080/09500839.2020.1871089","title":"Analysis of isothermal solidification kinetics during TLP bonding involving two-dimensional solid–liquid interface migration","year":2021,"lang":"en","type":"article","venue":"Philosophical Magazine Letters","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Manitoba","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Isothermal process; Kinetics; Work (physics); Diffusion; Thermodynamics; Materials science; RADIUS; Curvature; Phase (matter); Transient (computer programming); Mechanics; Constant (computer programming); Chemistry; Classical mechanics; Physics; Geometry","score_opus":0.017226275203283535,"score_gpt":0.2486495934253085,"score_spread":0.23142331822202497,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3118454352","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9272978,0.0003262382,0.06950978,0.00005096828,0.00001700065,0.000042703286,0.00010019652,0.00020083126,0.0024545882],"genre_scores_gemma":[0.9949431,0.00016235995,0.0041506668,0.0000049968526,0.0000024149492,0.000026931728,0.000045135723,0.000016135653,0.0006482666],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99993443,0.000005666434,0.0000031463233,0.000014670416,0.000031650798,0.000010444594],"domain_scores_gemma":[0.999879,0.00005448298,0.000028967446,0.000012894669,0.000017907036,0.0000068038844],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00017160753,0.00023371962,0.00025640705,0.000265677,0.00015137659,0.000268711,0.0002445814,0.00020109619,0.0006449967],"category_scores_gemma":[0.0003683573,0.00016640777,0.00023636084,0.00023501433,0.00033845278,0.0004051076,0.00017053797,0.00043420275,0.00015160207],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00012394697,0.00011172299,0.0024907812,0.0001451304,0.000017341255,0.0001553317,0.0002004066,0.067568526,0.9116706,0.005438955,0.00012393668,0.011953247],"study_design_scores_gemma":[0.000006542528,0.00006610504,0.0019682918,0.0000033958731,0.0000061691203,0.000033769466,0.00002322941,0.68384653,0.31317896,0.00040846117,0.00044715757,0.000011371382],"about_ca_topic_score_codex":0.0011331738,"about_ca_topic_score_gemma":0.00058414583,"teacher_disagreement_score":0.0011331738,"about_ca_system_score_codex":0.00036209438,"about_ca_system_score_gemma":0.00030775715,"threshold_uncertainty_score":0.002627194},"labels":[],"label_agreement":null},{"id":"W3119914849","doi":"10.1002/pat.5206","title":"Experimental investigation and numerical simulation of the microinjection molding process through an expanding flow configuration","year":2021,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University; McGill University Health Centre","funders":"","keywords":"Materials science; Polyoxymethylene; Composite material; Molding (decorative); Mold; Solid mechanics; Flow (mathematics); Transverse plane; Microinjection; Thermal; Shear (geology); Polarized light microscopy; Polymer; Mechanics; Optics; Structural engineering; Thermodynamics","score_opus":0.020771546739544244,"score_gpt":0.2793813624374525,"score_spread":0.25860981569790825,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3119914849","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97610426,0.00010017744,0.017253729,0.00006255465,0.000021282276,0.00007281395,0.00052328163,0.00026560345,0.0055962116],"genre_scores_gemma":[0.99155265,0.00006483323,0.007661744,0.0000059849667,0.0000023626358,0.000059954124,0.0001352598,0.000013928953,0.0005032528],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99991345,0.000008829165,0.0000040706664,0.000021191989,0.000030661096,0.00002183623],"domain_scores_gemma":[0.99972874,0.00013156206,0.000048504422,0.000039418475,0.00003468207,0.000017120734],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019167094,0.00031786558,0.00034744234,0.00018634992,0.00034376179,0.00028750242,0.00045233977,0.0004477047,0.0022449093],"category_scores_gemma":[0.0004329151,0.00014665206,0.00019052265,0.0002778301,0.00039180546,0.00021425862,0.00021333295,0.00033470622,0.00010340518],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00040161435,0.0005392018,0.0045329975,0.00032353634,0.000021364174,0.00036936623,0.00022160601,0.72245693,0.2525758,0.00495143,0.0004456413,0.013160406],"study_design_scores_gemma":[0.000038489867,0.00039894215,0.00254297,0.000009136497,0.000009973496,0.000039731898,0.000036441612,0.93191576,0.06399347,0.00035691742,0.00064307876,0.000015228592],"about_ca_topic_score_codex":0.0013673389,"about_ca_topic_score_gemma":0.0011673893,"teacher_disagreement_score":0.0022449093,"about_ca_system_score_codex":0.00025773252,"about_ca_system_score_gemma":0.0003765772,"threshold_uncertainty_score":0.0075100064},"labels":[],"label_agreement":null},{"id":"W3122369779","doi":"10.1007/s12289-021-01612-0","title":"Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding","year":2021,"lang":"en","type":"article","venue":"International Journal of Material Forming","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Mitacs","keywords":"Metal injection molding; Raw material; Materials science; Mold; Molding (decorative); Metal powder; Metallurgy; Composite material; Metal; Sintering","score_opus":0.01974120844196169,"score_gpt":0.2611000956357182,"score_spread":0.24135888719375648,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3122369779","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99487704,0.000049540908,0.0024557728,0.000021281588,0.000008935551,0.000014370787,0.00012360288,0.00006944392,0.0023800363],"genre_scores_gemma":[0.9983891,0.000026829839,0.0011045015,0.0000024402873,7.6581915e-7,0.000006287438,0.000042917,0.000008595278,0.00041855537],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999907,0.000011430129,0.000005616995,0.000020032687,0.000034546894,0.00002129696],"domain_scores_gemma":[0.99966323,0.00019551371,0.00004362505,0.000030072431,0.00005503012,0.000012555915],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001714636,0.00028611743,0.00040517634,0.00024831554,0.00033891128,0.00040058166,0.00046628082,0.0006086787,0.0017598573],"category_scores_gemma":[0.00052551745,0.00019610541,0.00036866343,0.00028502566,0.00036347276,0.00037785617,0.00015259568,0.00023350758,0.00014442366],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0009016216,0.0004369527,0.009791193,0.0004542207,0.000028640961,0.0007628741,0.00024638386,0.7576883,0.21084538,0.001618497,0.0003745415,0.016851362],"study_design_scores_gemma":[0.00004452627,0.00046234234,0.0049853106,0.000010941769,0.000027229684,0.000057493056,0.00010368161,0.8907962,0.10276844,0.0001591489,0.0005679686,0.00001664603],"about_ca_topic_score_codex":0.0032193337,"about_ca_topic_score_gemma":0.0023347682,"teacher_disagreement_score":0.0032193337,"about_ca_system_score_codex":0.00031303722,"about_ca_system_score_gemma":0.00032346766,"threshold_uncertainty_score":0.006401181},"labels":[],"label_agreement":null},{"id":"W3127739352","doi":"10.3390/met11020264","title":"Effect of Thermal Debinding Conditions on the Sintered Density of Low-Pressure Powder Injection Molded Iron Parts","year":2021,"lang":"en","type":"article","venue":"Metals","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Rio Tinto (Canada); École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Sintering; Materials science; Metal injection molding; Raw material; Mold; Molding (decorative); Ceramic; Viscosity; Composite material; Iron powder; Metal powder; Metal; Injection moulding; Metallurgy","score_opus":0.012899723238032368,"score_gpt":0.231802344616007,"score_spread":0.21890262137797462,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3127739352","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99822944,0.00036411872,0.00077011925,0.000010014077,0.0000070892297,0.0000071501477,0.000050861403,0.000032218733,0.00052889716],"genre_scores_gemma":[0.998648,0.00018337244,0.0007080652,0.0000073479478,0.0000019663632,0.0000063426446,0.000063823245,0.000023571694,0.00035745118],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999796,0.000018906492,0.000023812727,0.000048508748,0.00006861718,0.00004419776],"domain_scores_gemma":[0.9994149,0.00026141986,0.00014720975,0.00004464862,0.000100670586,0.000031052117],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026238314,0.000313516,0.00028220488,0.00035052578,0.0001532514,0.00032476542,0.00022955202,0.0002364093,0.0014485249],"category_scores_gemma":[0.00091246894,0.00030609072,0.00021515897,0.00032255394,0.00031572304,0.00035100582,0.00016112397,0.00044651987,0.00031311545],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002838737,0.00002851597,0.00070362946,0.00008582161,0.0000075011694,0.00007115967,0.00012005844,0.0003873483,0.9956376,0.00004275454,0.000017893013,0.0026138618],"study_design_scores_gemma":[0.0000035174337,0.0001460848,0.0036627098,0.0000049925156,0.000009325433,0.000027414042,0.00004109221,0.00072202866,0.9952017,0.000006364283,0.00017045526,0.000004225028],"about_ca_topic_score_codex":0.00067937846,"about_ca_topic_score_gemma":0.0014302363,"teacher_disagreement_score":0.0014485249,"about_ca_system_score_codex":0.00022859426,"about_ca_system_score_gemma":0.00013836197,"threshold_uncertainty_score":0.0048457384},"labels":[],"label_agreement":null},{"id":"W3167903548","doi":"10.1139/tcsme-2021-0053","title":"Multi-objective optimization of GFRP injection molding process parameters, using GA-ELM, MOFA, and GRA-TOPSIS","year":2021,"lang":"en","type":"article","venue":"Transactions of the Canadian Society for Mechanical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"TOPSIS; Shrinkage; Volume (thermodynamics); Extreme learning machine; Multi-objective optimization; Genetic algorithm; Materials science; Molding (decorative); Fibre-reinforced plastic; Computer science; Composite material; Mathematics; Artificial intelligence; Machine learning; Artificial neural network","score_opus":0.020076762052870963,"score_gpt":0.21937576459471886,"score_spread":0.1992990025418479,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3167903548","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.36382255,0.00066522765,0.627775,0.00015987678,0.00006740914,0.00022760646,0.00014847652,0.0006419788,0.006491846],"genre_scores_gemma":[0.796528,0.0002243568,0.2011304,0.00004120577,0.0000075827656,0.0003094565,0.00012543457,0.00005010739,0.0015835289],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997054,0.00007446301,0.000018202165,0.000043945118,0.00011179906,0.000046143996],"domain_scores_gemma":[0.9994822,0.00029020294,0.000074293894,0.000022517735,0.00011564797,0.000015077378],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010845792,0.0011632101,0.00072490796,0.0010641078,0.00044805094,0.00075364904,0.0006936256,0.0008859509,0.0008985766],"category_scores_gemma":[0.0013969903,0.00045650147,0.0011057989,0.00074979186,0.00033844777,0.00039479308,0.00041871466,0.0006812672,0.000102260354],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003802541,0.000051851148,0.00058639265,0.00007520822,0.000028075665,0.000041740725,0.000027688013,0.9763291,0.0041529844,0.00071775995,0.00012434435,0.017826801],"study_design_scores_gemma":[0.000007863183,0.000056846362,0.0002076118,0.000004185251,0.000008442466,0.0000066610546,0.000009183984,0.9973558,0.002018207,0.00016873037,0.00015137548,0.000005038093],"about_ca_topic_score_codex":0.0069837575,"about_ca_topic_score_gemma":0.0065854187,"teacher_disagreement_score":0.0069837575,"about_ca_system_score_codex":0.0008093948,"about_ca_system_score_gemma":0.0009442542,"threshold_uncertainty_score":0.013886213},"labels":[],"label_agreement":null},{"id":"W3194099314","doi":"10.1007/s11665-021-06061-z","title":"Multiphysics Modeling and Experimental Investigation of the Deposition Process in Fused Filament Fabrication Method, under High-Viscosity and Non-Newtonian Material Flow","year":2021,"lang":"en","type":"article","venue":"Journal of Materials Engineering and Performance","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Okanagan University College; University of British Columbia, Okanagan Campus; University of British Columbia","funders":"","keywords":"Multiphysics; Materials science; Fabrication; Viscosity; Deposition (geology); Protein filament; Flow (mathematics); Newtonian fluid; Process (computing); Composite material; Mechanics; Mechanical engineering; Thermodynamics; Finite element method; Computer science; Engineering; Physics","score_opus":0.010086799796872792,"score_gpt":0.2124483041685232,"score_spread":0.2023615043716504,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3194099314","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.95731425,0.00038834204,0.034662746,0.00022403031,0.000045106946,0.000041167008,0.0002770278,0.0003214186,0.006725886],"genre_scores_gemma":[0.995047,0.00013301084,0.003834583,0.0000114121785,0.0000054874745,0.000020118285,0.000069254114,0.000019344097,0.00085982616],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999863,0.000010191551,0.0000053966,0.000034646462,0.00006769262,0.000019066416],"domain_scores_gemma":[0.99980015,0.00009012357,0.000039658968,0.000022820906,0.000038923466,0.0000083116465],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002466913,0.0002955801,0.00028820004,0.00020876901,0.00045938187,0.00033916143,0.00050073094,0.0006191387,0.0012898969],"category_scores_gemma":[0.0003692695,0.0003151255,0.00037098755,0.00030606272,0.00029110405,0.00057584746,0.00012912317,0.00030630763,0.00016638477],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0003752596,0.00034990552,0.0041814037,0.00026016537,0.00002847069,0.0003055802,0.00026447035,0.19367288,0.782834,0.0031238846,0.0007212416,0.013882799],"study_design_scores_gemma":[0.000020341618,0.0001368619,0.0068292515,0.0000068768068,0.00001606419,0.00006601655,0.000042606018,0.8446193,0.1472452,0.00024931954,0.0007475382,0.00002075309],"about_ca_topic_score_codex":0.0025176157,"about_ca_topic_score_gemma":0.0016295423,"teacher_disagreement_score":0.0025176157,"about_ca_system_score_codex":0.00051973324,"about_ca_system_score_gemma":0.000409661,"threshold_uncertainty_score":0.0050059557},"labels":[],"label_agreement":null},{"id":"W3208499264","doi":"10.1504/ijmpt.2022.120657","title":"Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology","year":2022,"lang":"en","type":"article","venue":"International Journal of Materials and Product Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Response surface methodology; Volumetric flow rate; Process (computing); Production (economics); Production rate; Process engineering; Stability (learning theory); Injection moulding; Design of experiments; Materials science; Mathematics; Computer science; Engineering; Statistics; Composite material; Mechanics","score_opus":0.0380398600001955,"score_gpt":0.3023599702144715,"score_spread":0.264320110214276,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3208499264","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.46479985,0.0006950509,0.5295436,0.00007576699,0.000032935463,0.000370097,0.00013587777,0.00039996082,0.003946956],"genre_scores_gemma":[0.79471534,0.00028609214,0.20303676,0.000020991967,0.000006653167,0.0004812849,0.00012026087,0.000058624893,0.0012741457],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99970704,0.000079518024,0.000018021969,0.00005081258,0.00010703942,0.000037605274],"domain_scores_gemma":[0.9996025,0.00026271743,0.000053655287,0.000016264983,0.00005485361,0.000010084318],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0011143533,0.0008104093,0.0008404127,0.0007842959,0.00022386607,0.0006568882,0.00043420686,0.000635451,0.00088269],"category_scores_gemma":[0.0007710988,0.00029650444,0.00082216936,0.0004733859,0.0002906645,0.00027999893,0.00034894273,0.00047127836,0.00011280695],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013375572,0.00019108054,0.0009947354,0.00046534557,0.000054003347,0.00006742524,0.000052394727,0.8618872,0.090578705,0.0010683052,0.000120238845,0.04438676],"study_design_scores_gemma":[0.00001894234,0.0004378748,0.001120697,0.0000106267335,0.000019858919,0.000019702422,0.000018753659,0.974144,0.02332312,0.0003851614,0.0004864443,0.000014783504],"about_ca_topic_score_codex":0.0012281453,"about_ca_topic_score_gemma":0.001616366,"teacher_disagreement_score":0.0012281453,"about_ca_system_score_codex":0.00043974066,"about_ca_system_score_gemma":0.00068784854,"threshold_uncertainty_score":0.0058933496},"labels":[],"label_agreement":null},{"id":"W3208604072","doi":"10.1016/j.matchar.2021.111555","title":"Determining the heat treatment behaviour of metal injection moulded and wrought alloy 718 using differential scanning calorimetry","year":2021,"lang":"en","type":"article","venue":"Materials Characterization","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Dalhousie University","funders":"Natural Sciences and Engineering Research Council of Canada; Pratt and Whitney Canada","keywords":"Endothermic process; Exothermic reaction; Materials science; Differential scanning calorimetry; Dissolution; Solvus; Alloy; Precipitation; Metallurgy; Carbide; Phase (matter); Chemical engineering; Analytical Chemistry (journal); Superalloy; Adsorption; Thermodynamics; Chemistry; Chromatography","score_opus":0.023271102716712972,"score_gpt":0.23249161748860894,"score_spread":0.20922051477189596,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3208604072","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9961402,0.00020755045,0.0018189929,0.000028500828,0.000013685232,0.000012969243,0.00035278258,0.000096866825,0.0013284114],"genre_scores_gemma":[0.99481803,0.00010075154,0.001968088,0.000010986847,0.0000028819052,0.000016275446,0.00031178334,0.000036362468,0.002734856],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99972266,0.00001634251,0.000016577385,0.000048149155,0.00015579765,0.00004048121],"domain_scores_gemma":[0.9997985,0.000046356756,0.000034585304,0.000020865695,0.000090351125,0.0000094312845],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019525256,0.00026216332,0.00027145492,0.00046921129,0.0003018832,0.0002548664,0.00030625475,0.0002877432,0.0015779517],"category_scores_gemma":[0.0003942718,0.00017626987,0.00018357458,0.00044970535,0.00027231604,0.00023706612,0.00009344396,0.0002792048,0.0003111618],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009509406,0.000011157117,0.0008555826,0.000032705702,0.00000389547,0.00002960708,0.000061958126,0.0003893559,0.9956474,0.00006947298,0.00008247784,0.0027214184],"study_design_scores_gemma":[0.0000020938235,0.000084800464,0.0068611195,0.0000016452643,0.000005771498,0.000028072764,0.000030373092,0.001435316,0.99071676,0.000010836927,0.0008173685,0.000005748575],"about_ca_topic_score_codex":0.002752356,"about_ca_topic_score_gemma":0.0063411472,"teacher_disagreement_score":0.002752356,"about_ca_system_score_codex":0.00049701374,"about_ca_system_score_gemma":0.0002458432,"threshold_uncertainty_score":0.00547266},"labels":[],"label_agreement":null},{"id":"W3212175260","doi":"10.1115/imece2000-1223","title":"Design Sensitivity Analysis Applied to Injection Molding Process: Injection Pressure and Multi-Gate Location Optimization","year":2000,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Sensitivity (control systems); Sequential quadratic programming; Finite element method; Robustness (evolution); Mathematical optimization; Computer science; Quadratic programming; Control theory (sociology); Mathematics; Engineering; Electronic engineering; Structural engineering","score_opus":0.014013825429691113,"score_gpt":0.2185720088052188,"score_spread":0.20455818337552767,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3212175260","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.035324473,0.00024300496,0.96046984,0.00013298048,0.000024770152,0.00007255428,0.00003301986,0.000132607,0.0035667694],"genre_scores_gemma":[0.9055046,0.0002579766,0.09215921,0.000043524375,0.000014721683,0.00018935249,0.000039363727,0.00006324937,0.0017280537],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9994772,0.00026927597,0.000016286165,0.000046386387,0.00015321668,0.00003762604],"domain_scores_gemma":[0.99866045,0.001059293,0.00008549785,0.000048795275,0.00012890143,0.000017093897],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0016642966,0.0008121503,0.0007660172,0.0006750984,0.000350825,0.000679283,0.00036682954,0.00072170724,0.0013652797],"category_scores_gemma":[0.0024510464,0.0004548825,0.00090101693,0.00035314492,0.00062682293,0.0004185979,0.0006200186,0.0005144094,0.00013354576],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012142218,0.0000083706755,0.00013957007,0.000028128119,0.000011985957,0.000015301028,0.000008801495,0.99339664,0.0016509324,0.0018393844,0.0000374471,0.0028513242],"study_design_scores_gemma":[0.000002340048,0.000009329366,0.00004880138,0.0000024343883,0.0000035609607,0.0000040639998,0.0000014880321,0.998295,0.0010398171,0.0004646969,0.00012643069,0.000002058604],"about_ca_topic_score_codex":0.0029258623,"about_ca_topic_score_gemma":0.0011785518,"teacher_disagreement_score":0.0029258623,"about_ca_system_score_codex":0.0007838319,"about_ca_system_score_gemma":0.00093367044,"threshold_uncertainty_score":0.008801758},"labels":[],"label_agreement":null},{"id":"W3217149774","doi":"10.1016/j.mechmat.2021.104175","title":"Predicting the multiaxial stress-strain behavior of polyethylene terephthalate (PET) at different strain rates and temperatures above Tg by using an Artificial Neural Network","year":2021,"lang":"en","type":"article","venue":"Mechanics of Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"China Scholarship Council; Queen's University","keywords":"Materials science; Polyethylene terephthalate; Stress (linguistics); Composite material; Artificial neural network; Deformation (meteorology); Strain rate; Strain (injury); Backpropagation; Work (physics); Constant (computer programming); Stress–strain curve; Plane stress; Structural engineering; Finite element method; Mechanical engineering; Artificial intelligence; Computer science","score_opus":0.02375439054326724,"score_gpt":0.24669293690032046,"score_spread":0.2229385463570532,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3217149774","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98766685,0.00008093037,0.011716568,0.000031491494,0.000009877453,0.0000065397335,0.0000588681,0.00005861159,0.00037031973],"genre_scores_gemma":[0.99701905,0.00005162481,0.0025316856,0.0000036837264,0.0000014840851,0.0000054165707,0.000051672294,0.0000040338655,0.00033130642],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999622,0.0000045221063,0.0000032525882,0.000011610503,0.000013833318,0.0000045941606],"domain_scores_gemma":[0.99986386,0.00006872755,0.000029222778,0.00000733878,0.000025103209,0.0000057229795],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001350301,0.0003654644,0.0001243198,0.00019774045,0.00010943353,0.00018223815,0.00016545513,0.00037779185,0.00032916054],"category_scores_gemma":[0.0003441625,0.000173214,0.00019296499,0.0001814489,0.00013015438,0.00032006353,0.0000791222,0.00020718914,0.000047672875],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00026525778,0.00017542955,0.012639526,0.000103759805,0.000031794665,0.0001372891,0.000048396163,0.7438478,0.20696342,0.00025772976,0.00016532563,0.035364233],"study_design_scores_gemma":[0.000001944243,0.000058408285,0.0038279453,0.0000014232812,0.000005095498,0.000010162846,0.000007275377,0.9689078,0.027088026,0.00003954051,0.000048283182,0.000004156041],"about_ca_topic_score_codex":0.0024520867,"about_ca_topic_score_gemma":0.0036011625,"teacher_disagreement_score":0.0024520867,"about_ca_system_score_codex":0.0002117783,"about_ca_system_score_gemma":0.00015732131,"threshold_uncertainty_score":0.0048756003},"labels":[],"label_agreement":null},{"id":"W4205791444","doi":"10.1007/s00170-021-08115-x","title":"Thermographic analysis of a long fiber–reinforced thermoplastic compression molding process","year":2022,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"","keywords":"Thermography; Compression molding; Materials science; Molding (decorative); Thermocouple; Compression (physics); Composite material; Thermoplastic; Temperature measurement; Process (computing); Mold; Mechanical engineering; Computer science; Optics; Engineering; Infrared","score_opus":0.006711190089603917,"score_gpt":0.2301436610648113,"score_spread":0.22343247097520738,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4205791444","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9907492,0.000610252,0.006139639,0.0000444618,0.000017756849,0.000018033074,0.0001584212,0.00018073543,0.002081655],"genre_scores_gemma":[0.99738055,0.00010013919,0.001368869,0.000010060157,0.0000036069275,0.000006528812,0.00007025978,0.000021343547,0.0010386867],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99988353,0.000007613631,0.000005030163,0.000025821118,0.000060794344,0.000017243143],"domain_scores_gemma":[0.9997429,0.000079216974,0.00006824184,0.000027679213,0.000060332895,0.000021595626],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00012949912,0.00017171376,0.00016368415,0.00036027926,0.00022369495,0.00022682591,0.00017790656,0.00023273563,0.0020739646],"category_scores_gemma":[0.00021904989,0.00011676603,0.0001606763,0.00030142165,0.00022110458,0.00024004134,0.00010879914,0.00024594425,0.00019047779],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009548232,0.000020685313,0.00047614417,0.000027155915,0.000003436375,0.000055199613,0.000047249236,0.00062189595,0.99400747,0.00007624175,0.000043022726,0.0045259628],"study_design_scores_gemma":[0.0000055880555,0.00017255853,0.013975398,0.0000040965124,0.000014532749,0.000058773727,0.000029910152,0.0063209385,0.9784695,0.000025910294,0.00091410393,0.000008601112],"about_ca_topic_score_codex":0.0013563591,"about_ca_topic_score_gemma":0.0017101632,"teacher_disagreement_score":0.0020739646,"about_ca_system_score_codex":0.00030216857,"about_ca_system_score_gemma":0.00024919215,"threshold_uncertainty_score":0.0069381595},"labels":[],"label_agreement":null},{"id":"W4230182743","doi":"10.5539/jmsr.v5n2p105","title":"Effect of Maleic Anhydride Modification on the Mechanical Properties of a Highly Filled Glass Fibre Reinforced, Low-Viscosity Polypropylene for Injection Moulding","year":2016,"lang":"en","type":"article","venue":"Journal of Materials Science Research","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Materials science; Composite material; Ultimate tensile strength; Izod impact strength test; Polypropylene; Maleic anhydride; Glass fiber; Modulus; Brittleness; Stiffness; Injection moulding; Young's modulus; Viscosity; Polymer; Copolymer","score_opus":0.05781729208061491,"score_gpt":0.32203000372395346,"score_spread":0.26421271164333854,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4230182743","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.998524,0.00030119243,0.0005720044,0.000010729441,0.000010733504,0.00001033144,0.000041340656,0.00002478355,0.00050496194],"genre_scores_gemma":[0.99798006,0.00021073144,0.000853394,0.0000105042145,0.0000038664857,0.0000065635977,0.00005331195,0.000013348747,0.0008682382],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99991274,0.000011331655,0.000007940285,0.000020151176,0.000030296518,0.000017473953],"domain_scores_gemma":[0.9998386,0.0000349304,0.00006945998,0.000009403157,0.000019903617,0.00002769982],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011308386,0.00034511252,0.00015521707,0.00014274103,0.00006997932,0.00017626466,0.00012295671,0.00020250483,0.0011847069],"category_scores_gemma":[0.0002214392,0.00012248744,0.00015589433,0.000107257794,0.0001148523,0.00020967868,0.00008074396,0.00027934246,0.00023117781],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000061487044,0.000016485674,0.000059528662,0.000026406236,0.0000027784974,0.000020912217,0.0000056204167,0.00007600294,0.9990096,0.0000102916,0.0000050305757,0.0007058772],"study_design_scores_gemma":[0.0000028370982,0.0003102283,0.0014026512,0.000001779109,0.000007100512,0.00002119995,0.0000034678537,0.00022819564,0.99777776,0.0000019671693,0.00023991292,0.0000028419481],"about_ca_topic_score_codex":0.00027719987,"about_ca_topic_score_gemma":0.0005594861,"teacher_disagreement_score":0.0011847069,"about_ca_system_score_codex":0.00010295741,"about_ca_system_score_gemma":0.00008872063,"threshold_uncertainty_score":0.003963232},"labels":[],"label_agreement":null},{"id":"W4232151865","doi":"10.1007/978-3-662-53120-4_300428","title":"Micro End Mill","year":2019,"lang":"en","type":"book-chapter","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université du Québec à Trois-Rivières","funders":"","keywords":"Mill; Environmental science; Engineering; Mechanical engineering","score_opus":0.01351150517068339,"score_gpt":0.1766227147031283,"score_spread":0.1631112095324449,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4232151865","genre_codex":"other","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0037036154,0.0037869436,0.05397353,0.00030611263,0.0010162734,0.00015546031,0.0011853463,0.0027099203,0.93316287],"genre_scores_gemma":[0.0064177914,0.00096310896,0.010235936,0.00011910747,0.000060709128,0.000037979356,0.0007000822,0.0002784023,0.98118687],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999629,0.0000075388866,0.000007668262,0.00006788946,0.00026210825,0.000025730264],"domain_scores_gemma":[0.9998568,0.000020313339,0.0000086035625,0.00002860024,0.000071914095,0.000013765327],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00018026092,0.0009504678,0.0005999171,0.0017982175,0.001110845,0.0015302183,0.00081650546,0.0007547238,0.20125923],"category_scores_gemma":[0.00025588833,0.00069018453,0.00038530893,0.0010604429,0.00032396635,0.0012493,0.0010397576,0.0016274994,0.08153061],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000103253304,0.00009841774,0.00019774472,0.0004269307,0.000010330565,0.00017475292,0.0001349495,0.0008108272,0.063257016,0.034720693,0.20462492,0.6954402],"study_design_scores_gemma":[0.000009971594,0.00005067849,0.0006514142,0.000057013924,0.000009643422,0.00036288108,0.000037931895,0.0012018448,0.035618834,0.0028983552,0.95908576,0.000015620937],"about_ca_topic_score_codex":0.00075607066,"about_ca_topic_score_gemma":0.0039980332,"teacher_disagreement_score":0.20125923,"about_ca_system_score_codex":0.000470688,"about_ca_system_score_gemma":0.00047599498,"threshold_uncertainty_score":0.67327917},"labels":[],"label_agreement":null},{"id":"W4233311312","doi":"10.1515/ipp-2007-0003","title":"Real-time Diagnosis of Micro Powder Injection Molding Using Integrated Ultrasonic Sensors","year":2007,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"","keywords":"Mold; Materials science; Ultrasonic sensor; Molding (decorative); Raw material; Composite material; Ceramic; Insert (composites); Ultrasonic testing; Injection molding machine; Mechanical engineering; Acoustics","score_opus":0.013718081778418002,"score_gpt":0.2525403713436126,"score_spread":0.23882228956519463,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4233311312","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8211892,0.0012341017,0.1739139,0.00011401581,0.000091530266,0.00006226287,0.00021758422,0.0018042212,0.0013731943],"genre_scores_gemma":[0.9558868,0.0002098296,0.04277693,0.000030548705,0.000014538539,0.000026869406,0.00007214777,0.00002632878,0.0009560926],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999683,0.000034760316,0.000013285485,0.00006750472,0.00017391716,0.000027647586],"domain_scores_gemma":[0.9996138,0.00018030663,0.00007347059,0.00001982226,0.0000950393,0.000017499591],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00028071823,0.00030853716,0.00028999575,0.00037735884,0.00007141043,0.00032378358,0.00029323302,0.0003715524,0.0006380195],"category_scores_gemma":[0.0006255801,0.00023809339,0.000114719856,0.00022021022,0.0002491679,0.00033986298,0.00013033235,0.00022619852,0.00017984648],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00017047719,0.00002420806,0.0014447639,0.000045692665,0.0000051806273,0.000038289403,0.000036883575,0.0005536165,0.977788,0.0001312017,0.00010779901,0.019653942],"study_design_scores_gemma":[0.00001732068,0.00018113227,0.0040850425,0.000004862486,0.000016990773,0.00012682994,0.000020440655,0.028766362,0.96605366,0.000050173476,0.00066537806,0.000011819048],"about_ca_topic_score_codex":0.00048871426,"about_ca_topic_score_gemma":0.0007676833,"teacher_disagreement_score":0.0006380195,"about_ca_system_score_codex":0.00031090557,"about_ca_system_score_gemma":0.00017603069,"threshold_uncertainty_score":0.002255857},"labels":[],"label_agreement":null},{"id":"W4236318818","doi":"10.1002/pat.4143","title":"Morphology and flow effect of microinjection‐molded plastic microgears","year":2017,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; McGill University","funders":"","keywords":"Volume (thermodynamics); Materials science; Polymer science; Humanities; Computer science; Art history; Art; Physics; Thermodynamics","score_opus":0.007068407306377245,"score_gpt":0.2292528945909181,"score_spread":0.22218448728454085,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4236318818","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9949018,0.00031786304,0.0013350399,0.000041695832,0.00006617974,0.00001258023,0.000084104926,0.000099615856,0.0031410758],"genre_scores_gemma":[0.9963337,0.00014479627,0.0007559655,0.00002280703,0.000010278639,0.0000056284925,0.00005195816,0.00003470146,0.0026400136],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99993587,0.0000036218255,0.000002709951,0.000018973824,0.000018151819,0.000020630196],"domain_scores_gemma":[0.9998418,0.000054408938,0.000042584586,0.000011851346,0.00002734669,0.00002206888],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00009607374,0.00014705886,0.00007982024,0.00014109173,0.00012918857,0.00041174525,0.00014993758,0.0001939317,0.0031263416],"category_scores_gemma":[0.00024662263,0.0001190288,0.000117889176,0.00006853212,0.00022986147,0.0002797601,0.00008571655,0.00020114087,0.00030036597],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00020643784,0.00003273846,0.00026606297,0.00002247225,0.0000030784645,0.0000651423,0.000069948896,0.00042838903,0.9929039,0.00016673421,0.00014376981,0.0056914226],"study_design_scores_gemma":[0.000018769613,0.0002599805,0.005755167,0.0000054404136,0.000011146993,0.00004173588,0.000046582034,0.0032571724,0.9894182,0.000037431644,0.001139101,0.000009175643],"about_ca_topic_score_codex":0.0006349561,"about_ca_topic_score_gemma":0.0007665309,"teacher_disagreement_score":0.0031263416,"about_ca_system_score_codex":0.00023444254,"about_ca_system_score_gemma":0.00012071328,"threshold_uncertainty_score":0.010458708},"labels":[],"label_agreement":null},{"id":"W4255645318","doi":"10.1515/iupac.69.0595","title":"Characterization of Finite Length Composites: Part II. Mechanical Performance of Injection Moulded Composites","year":2016,"lang":"en","type":"dataset","venue":"IUPAC Standards Online","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université de Sherbrooke","funders":"","keywords":"Composite material; Materials science; Stiffness; Ultimate tensile strength; Polypropylene; Injection moulding; Toughness; Kevlar; Glass fiber; Polyamide; Stress (linguistics); Modulus; Creep; Aramid; Tensile testing; Fiber; Epoxy","score_opus":0.012901000771404034,"score_gpt":0.29506159620901207,"score_spread":0.282160595437608,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4255645318","genre_codex":"dataset","genre_gemma":"dataset","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"dataset","genre_consensus":"dataset","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0030828186,0.00065999676,0.0003439705,0.000056285782,0.000027244645,0.00007744774,0.9946291,0.0005217935,0.0006013289],"genre_scores_gemma":[0.0023276857,0.00026260462,0.00094452006,0.000031907388,0.0000064231795,0.00029643055,0.9954857,0.00004415031,0.00060048176],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99864584,0.00016405385,0.0002591132,0.00037319848,0.00041003237,0.00014776475],"domain_scores_gemma":[0.99817836,0.0005662684,0.00030564793,0.00036590375,0.00047381662,0.00010990499],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0013339866,0.0022975456,0.0015339296,0.0041821646,0.0005684586,0.0014442888,0.0022255532,0.0021617871,0.010126405],"category_scores_gemma":[0.004209399,0.00054061983,0.0019544053,0.0037839313,0.00049079774,0.0007729373,0.0013805835,0.0013190516,0.016354643],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0017553467,0.00081284915,0.018679963,0.028311742,0.0008443267,0.00063082104,0.0002498547,0.012050028,0.012575621,0.0014661602,0.8454585,0.07716476],"study_design_scores_gemma":[0.00082115934,0.0003468261,0.06117051,0.0019982832,0.0002603145,0.00052884134,0.00022351151,0.0041166884,0.009288832,0.0015073128,0.91959053,0.0001471546],"about_ca_topic_score_codex":0.011977169,"about_ca_topic_score_gemma":0.02048802,"teacher_disagreement_score":0.011977169,"about_ca_system_score_codex":0.0011936732,"about_ca_system_score_gemma":0.0016524924,"threshold_uncertainty_score":0.03387624},"labels":[],"label_agreement":null},{"id":"W4280496718","doi":"10.21203/rs.3.rs-1623191/v1","title":"Machine Learning Models to Accelerate the Design of Polymeric Long-Acting Injectables","year":2022,"lang":"en","type":"preprint","venue":"Research Square","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Toronto","funders":"Natural Sciences and Engineering Research Council of Canada; Advanced Research Projects Agency; Defense Advanced Research Projects Agency; Vector Institute","keywords":"Computer science; Mathematics","score_opus":0.19651593262909176,"score_gpt":0.35218124369129494,"score_spread":0.1556653110622032,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4280496718","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.10186339,0.0009871991,0.889099,0.00046099126,0.00010706113,0.00017386109,0.00024185918,0.0021469758,0.004919651],"genre_scores_gemma":[0.6980989,0.00037664274,0.2967958,0.00014135712,0.000041905245,0.00032936124,0.0005603417,0.00021615422,0.0034394576],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997594,0.00007645678,0.000017082508,0.000050422626,0.0000631361,0.000033497032],"domain_scores_gemma":[0.997924,0.0014778312,0.00015363196,0.000077513345,0.00031814523,0.00004892306],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010625978,0.00094947807,0.0007659635,0.00069995725,0.00026493258,0.0007695617,0.0009439164,0.00105827,0.0028795172],"category_scores_gemma":[0.0031893298,0.0005739549,0.0008145017,0.00042505682,0.00036893293,0.00058090617,0.0004508729,0.0014959496,0.0006266724],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001809929,0.00003233574,0.00030010167,0.00002980886,0.00001020862,0.000015885902,0.0000062653057,0.9867458,0.0006746662,0.0006836183,0.0002008991,0.011282237],"study_design_scores_gemma":[0.0000014466599,0.0000058134665,0.000019469897,0.0000024280516,0.0000013721121,0.0000010778134,7.722615e-7,0.99942577,0.00024141636,0.00020558361,0.000094269104,7.154509e-7],"about_ca_topic_score_codex":0.0053370837,"about_ca_topic_score_gemma":0.0048773726,"teacher_disagreement_score":0.0053370837,"about_ca_system_score_codex":0.00095178996,"about_ca_system_score_gemma":0.0011232975,"threshold_uncertainty_score":0.010612071},"labels":[],"label_agreement":null},{"id":"W4281619626","doi":"10.1007/s11661-022-06734-x","title":"Sintering Time Dependent Supersolidus Liquid Phase Sintering Behaviour of a Metal Injection Molded Nickel-Base Superalloy","year":2022,"lang":"en","type":"article","venue":"Metallurgical and Materials Transactions A","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Dalhousie University","funders":"","keywords":"Sintering; Materials science; Superalloy; Distortion (music); Metallurgy; Liquid phase; Phase (matter); Composite material; Microstructure; Thermodynamics","score_opus":0.01394741154322373,"score_gpt":0.21963866745242544,"score_spread":0.2056912559092017,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4281619626","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99895525,0.00009829547,0.0003691229,0.0000131247,0.0000065075037,0.0000025719946,0.00008880146,0.000053048487,0.0004132774],"genre_scores_gemma":[0.99905974,0.000049164155,0.00015310654,0.0000046094206,0.0000021472604,0.0000021995718,0.00008649983,0.000015259538,0.0006272436],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999026,0.000007926541,0.0000073487718,0.000023753026,0.00004026977,0.00001805443],"domain_scores_gemma":[0.99971396,0.00009332889,0.000062144005,0.000029612673,0.000076119235,0.000024790237],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00013761198,0.00019100557,0.00022632665,0.00018012931,0.00016623664,0.00018380929,0.00019565548,0.00017844868,0.0017559455],"category_scores_gemma":[0.0002897075,0.00011320956,0.00015154138,0.00019475352,0.00024416763,0.00022023037,0.00008410608,0.0002228101,0.00024697464],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0005445011,0.000023897006,0.0006710482,0.00003544192,0.000006875803,0.00011928726,0.00010700523,0.0005699086,0.99590826,0.000058069032,0.0000850308,0.0018706787],"study_design_scores_gemma":[0.000007748822,0.00030485156,0.0059170187,0.000002383542,0.00000776229,0.000035760688,0.000046816753,0.0039966702,0.9894035,0.000010000769,0.00026126887,0.000006194513],"about_ca_topic_score_codex":0.0028915782,"about_ca_topic_score_gemma":0.0031767979,"teacher_disagreement_score":0.0028915782,"about_ca_system_score_codex":0.00025681197,"about_ca_system_score_gemma":0.00020176262,"threshold_uncertainty_score":0.005874276},"labels":[],"label_agreement":null},{"id":"W4285004692","doi":"10.1002/cjce.24538","title":"Experimental methods in chemical engineering: Reactive extrusion","year":2022,"lang":"en","type":"article","venue":"The Canadian Journal of Chemical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"University of British Columbia; Polytechnique Montréal","funders":"","keywords":"Polypropylene; Materials science; Reactive extrusion; Extrusion; Compatibilization; Residence time (fluid dynamics); Residence time distribution; Polymer; Mixing (physics); Chemical engineering; Maleic anhydride; Depolymerization; Process engineering; Compounding; Rheology; Composite number; Composite material; Mechanical engineering; Copolymer; Polymer chemistry; Polymer blend; Chemistry; Engineering","score_opus":0.015687703219240744,"score_gpt":0.23928174886525969,"score_spread":0.22359404564601895,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4285004692","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0494059,0.07438523,0.7589628,0.0027606802,0.0041594845,0.0026241783,0.0030729328,0.0039872997,0.10064153],"genre_scores_gemma":[0.25386336,0.06418383,0.59493065,0.0024845516,0.0014134155,0.0065319748,0.0045247977,0.0014519285,0.07061558],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99604166,0.0005362488,0.000309524,0.0009964433,0.0019513426,0.00016473647],"domain_scores_gemma":[0.9988599,0.00026162152,0.00016731836,0.00034985362,0.00031518086,0.000046218636],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.002786552,0.0013036055,0.0010363829,0.0019210394,0.0009287255,0.0017359986,0.0014933477,0.0013606222,0.009219522],"category_scores_gemma":[0.0018555324,0.0008004332,0.00084787514,0.0020576203,0.0015001863,0.0025630277,0.0016173265,0.0024069713,0.0073583266],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0004338332,0.0006659942,0.0012144026,0.009520976,0.00014068649,0.0005511769,0.0005391989,0.0027727592,0.5817582,0.09114968,0.02031364,0.29093936],"study_design_scores_gemma":[0.00012578716,0.0006728277,0.0012721997,0.00059204013,0.000076518714,0.00082972355,0.000117391755,0.0033957907,0.5027269,0.008582445,0.4814995,0.00010881851],"about_ca_topic_score_codex":0.0004020492,"about_ca_topic_score_gemma":0.0004970571,"teacher_disagreement_score":0.009219522,"about_ca_system_score_codex":0.0012068229,"about_ca_system_score_gemma":0.0010352264,"threshold_uncertainty_score":0.030842364},"labels":[],"label_agreement":null},{"id":"W4308675030","doi":"10.5281/zenodo.7309021","title":"Machine Learning Models to Accelerate the Design of Polymeric Long-Acting Injectables","year":2022,"lang":"en","type":"article","venue":"Zenodo (CERN European Organization for Nuclear Research)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Toronto","funders":"","keywords":"Computer science","score_opus":0.07941124654428518,"score_gpt":0.2246782520519972,"score_spread":0.14526700550771204,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4308675030","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.1200561,0.0033378636,0.8575423,0.0009358784,0.00026296577,0.00040472613,0.002346602,0.007624487,0.00748908],"genre_scores_gemma":[0.4747981,0.0011182305,0.51300025,0.0003090876,0.0000973897,0.00070549734,0.004925687,0.0003259139,0.004719854],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9995945,0.00011411186,0.000036561392,0.00010924817,0.000092074646,0.00005347586],"domain_scores_gemma":[0.99751115,0.0017455424,0.00014218326,0.000109440276,0.00043720953,0.000054338823],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0012834662,0.0013458643,0.0009842846,0.0011176377,0.0003114669,0.0011918378,0.0014595162,0.0012444301,0.0036266425],"category_scores_gemma":[0.0048241443,0.00069449114,0.0012640818,0.0008378146,0.00030853477,0.00080299634,0.0006080012,0.0018549124,0.0012564056],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00007360725,0.00009424563,0.0010802307,0.00012121222,0.000038143116,0.000050455048,0.000017683573,0.9258554,0.0010571798,0.001256545,0.0019125572,0.06844275],"study_design_scores_gemma":[0.0000053646677,0.000012894512,0.00006363551,0.0000060786747,0.0000044367475,0.0000029761131,0.0000028141958,0.998547,0.000396576,0.00049064355,0.0004657456,0.0000017921362],"about_ca_topic_score_codex":0.008267535,"about_ca_topic_score_gemma":0.009448282,"teacher_disagreement_score":0.008267535,"about_ca_system_score_codex":0.0011942612,"about_ca_system_score_gemma":0.0014379895,"threshold_uncertainty_score":0.016438782},"labels":[],"label_agreement":null},{"id":"W4309468886","doi":"10.1139/tcsme-2022-0048","title":"Application of mold flow analysis to the study of plastic gear rack injection molding warpage","year":2022,"lang":"en","type":"article","venue":"Transactions of the Canadian Society for Mechanical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Mold; Molding (decorative); Taguchi methods; Materials science; Design of experiments; Factorial experiment; Mechanical engineering; Composite material; Computer-aided engineering; Orthogonal array; Injection molding machine; Response surface methodology; Flow (mathematics); Engineering drawing; Engineering; Computer science; Mathematics","score_opus":0.009765214422458233,"score_gpt":0.19635235521042094,"score_spread":0.1865871407879627,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4309468886","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.54439247,0.002258322,0.44948867,0.00006374329,0.00008392516,0.00041869402,0.00029878799,0.0005910002,0.0024044113],"genre_scores_gemma":[0.8904211,0.0012759465,0.10658438,0.000032882643,0.000019520185,0.00017126572,0.00018895928,0.000081336744,0.001224654],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9994723,0.00008706899,0.000037373946,0.000080334205,0.000284633,0.000038245253],"domain_scores_gemma":[0.999265,0.00037348308,0.00012819952,0.000060784732,0.00015437733,0.000018122211],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009059583,0.0005977477,0.0005495159,0.0014055021,0.0002597029,0.00041157962,0.0002625603,0.00026536663,0.0008378305],"category_scores_gemma":[0.001330972,0.00021864238,0.00040682024,0.00077457086,0.00039875493,0.00056571764,0.0001684305,0.00046577107,0.00015027968],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00015264544,0.00014656268,0.00452324,0.00027238994,0.000017683715,0.00012469255,0.0001878893,0.005237661,0.9029553,0.00065117853,0.00008335915,0.085647434],"study_design_scores_gemma":[0.000010631171,0.0007056279,0.0144411465,0.00001854652,0.000033679436,0.00021251455,0.00008527185,0.041395556,0.94066554,0.00041271225,0.0019867679,0.000032052114],"about_ca_topic_score_codex":0.00070932484,"about_ca_topic_score_gemma":0.0009442852,"teacher_disagreement_score":0.0014055021,"about_ca_system_score_codex":0.0003058763,"about_ca_system_score_gemma":0.00041202854,"threshold_uncertainty_score":0.0047912598},"labels":[],"label_agreement":null},{"id":"W4310869952","doi":"10.21203/rs.3.rs-2298601/v1","title":"Surface Properties of Molds for Powder Injection Molding and Their Effect on Feedstock Moldability and Mold Adhesion","year":2022,"lang":"en","type":"preprint","venue":"Research Square","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mold; Materials science; Adhesion; Composite material; Raw material; Molding (decorative); Surface energy; Adhesive; Surface tension; Polymer; Paint adhesion testing; Layer (electronics)","score_opus":0.06549102477454698,"score_gpt":0.32598140768660955,"score_spread":0.26049038291206256,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4310869952","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9969613,0.00045921915,0.0015730328,0.000011548391,0.000016171745,0.00001254555,0.00014925792,0.000045694207,0.0007712111],"genre_scores_gemma":[0.99800545,0.00021407318,0.0010561306,0.000007244475,0.0000039172282,0.00001000034,0.00012608968,0.000043026455,0.0005340791],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996916,0.000029369437,0.000021577987,0.000054896027,0.00015086817,0.000051662588],"domain_scores_gemma":[0.9995028,0.00021479139,0.00012326894,0.000059017068,0.00006667057,0.000033380977],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00024326069,0.00041539656,0.00033969877,0.00030094726,0.00012233302,0.00040321142,0.00018093802,0.00023494847,0.0013535796],"category_scores_gemma":[0.00077299925,0.00016872094,0.00028085502,0.00039975406,0.00021101884,0.00023148878,0.00021965745,0.00038143553,0.00021005087],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006167229,0.00001805704,0.00035054795,0.000036150344,0.000005841546,0.000032557084,0.000024344956,0.00022036023,0.99749905,0.000025287432,0.000011003437,0.0017151226],"study_design_scores_gemma":[0.0000022079623,0.00011314366,0.0026187717,0.0000024569288,0.000006899445,0.000016571694,0.0000114826535,0.00051310164,0.99653554,0.0000062621993,0.0001710249,0.0000024049264],"about_ca_topic_score_codex":0.00048477424,"about_ca_topic_score_gemma":0.0007306398,"teacher_disagreement_score":0.0013535796,"about_ca_system_score_codex":0.00017534153,"about_ca_system_score_gemma":0.00010300277,"threshold_uncertainty_score":0.0045282245},"labels":[],"label_agreement":null},{"id":"W4313855446","doi":"10.22541/au.167330563.32218729/v1","title":"GENERAL INDUSTRIAL PROCESS OPTIMIZATION METHOD TO LEVERAGE MACHINE LEARNING APPLIED TO INJECTION MOLDING","year":2023,"lang":"en","type":"preprint","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick; Ontario Tech University","funders":"Natural Sciences and Engineering Research Council of Canada; Mitacs; New Brunswick Innovation Foundation","keywords":"Automation; Leverage (statistics); Manufacturing engineering; Industrial engineering; Computer science; Generality; Artificial intelligence; Process (computing); Industrial production; Context (archaeology); Machine learning; Engineering; Mechanical engineering","score_opus":0.0635212351000316,"score_gpt":0.29063002247898595,"score_spread":0.22710878737895435,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4313855446","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.003022659,0.000106397994,0.9941723,0.0000524864,0.000017118577,0.00005340602,0.00002970132,0.0003420915,0.002203838],"genre_scores_gemma":[0.24885243,0.00027242125,0.74203247,0.0001140769,0.00005804394,0.00040916103,0.0002620143,0.00032725392,0.0076721613],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99968314,0.00006664839,0.000018744064,0.000074389594,0.0001307295,0.00002635506],"domain_scores_gemma":[0.99978703,0.000085552594,0.000026018393,0.00002457056,0.00006803307,0.000008834062],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008267975,0.0008622795,0.0007043244,0.00060041447,0.0003006132,0.0006385086,0.0009866129,0.0010239151,0.0034556247],"category_scores_gemma":[0.0011226519,0.00041918672,0.0009393167,0.0005294926,0.00040379728,0.0005005954,0.0008532912,0.0010131419,0.00076518033],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000033436543,0.00006596166,0.00047269132,0.00013970517,0.000032949127,0.00007537916,0.000034616674,0.89459515,0.0074062427,0.009045482,0.0009791339,0.08711928],"study_design_scores_gemma":[0.0000029867576,0.000010480232,0.00004974361,0.0000033210179,0.0000026450257,0.000008096912,0.000002016948,0.99680555,0.0009263373,0.0012179321,0.00096882554,0.000002050276],"about_ca_topic_score_codex":0.0035813865,"about_ca_topic_score_gemma":0.0036407611,"teacher_disagreement_score":0.0035813865,"about_ca_system_score_codex":0.0005811889,"about_ca_system_score_gemma":0.0012158105,"threshold_uncertainty_score":0.011560261},"labels":[],"label_agreement":null},{"id":"W4318220075","doi":"10.1515/ipp-2022-4288","title":"Influence of mold cavity thickness on electrical, morphological and thermal properties of polypropylene/carbon micromoldings","year":2023,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"China Postdoctoral Science Foundation; National Natural Science Foundation of China","keywords":"Materials science; Polypropylene; Composite material; Molding (decorative); Crystallinity; Differential scanning calorimetry; Shearing (physics); Carbon black; Mold; Carbon fibers; Polymer; Thermal","score_opus":0.01571681789909727,"score_gpt":0.22558223343329004,"score_spread":0.20986541553419277,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4318220075","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99829036,0.00022642534,0.00096234895,0.0000070561114,0.000010152723,0.0000070407855,0.000051057497,0.00003972473,0.000405799],"genre_scores_gemma":[0.99848455,0.00008246256,0.0009963408,0.0000067199408,0.0000023388322,0.000005982804,0.0000378373,0.000019972429,0.00036391788],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99988055,0.000009568347,0.0000110435785,0.000031971325,0.00004228639,0.000024540748],"domain_scores_gemma":[0.99949527,0.00018446837,0.00014028169,0.00006294305,0.00007613045,0.00004087997],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00016443065,0.00027855736,0.00014629368,0.00016491787,0.00010871419,0.00022157562,0.00012746154,0.00016704701,0.00066421117],"category_scores_gemma":[0.00055829977,0.00016781139,0.00014355866,0.000108404056,0.00017536792,0.00025985896,0.000115627445,0.00022088188,0.0001402491],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000029594763,0.0000071322897,0.00025520104,0.000019225678,0.0000031846753,0.000031780473,0.000016439795,0.00015390849,0.99821883,0.000015397169,0.000009022072,0.0012401742],"study_design_scores_gemma":[0.0000013199659,0.000108774264,0.0034719892,0.0000020155928,0.0000071861637,0.000031524396,0.000012945992,0.000367773,0.9957996,0.0000039535535,0.00019001585,0.0000028508084],"about_ca_topic_score_codex":0.00021999869,"about_ca_topic_score_gemma":0.0005858584,"teacher_disagreement_score":0.00066421117,"about_ca_system_score_codex":0.000117059004,"about_ca_system_score_gemma":0.00008621521,"threshold_uncertainty_score":0.0022220016},"labels":[],"label_agreement":null},{"id":"W4322207981","doi":"10.1007/s00170-023-11148-z","title":"Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion","year":2023,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mold; Materials science; Adhesion; Composite material; Raw material; Molding (decorative); Surface energy; Adhesive; Surface tension; Polymer; Layer (electronics)","score_opus":0.013303737057626112,"score_gpt":0.23504315630926997,"score_spread":0.22173941925164387,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4322207981","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9983852,0.0003290907,0.0005436852,0.000019544139,0.00001795381,0.000009160171,0.00012315084,0.000019298655,0.00055299065],"genre_scores_gemma":[0.998733,0.00016331232,0.00048427284,0.000012055217,0.0000048302904,0.0000076005995,0.00012830636,0.000023342382,0.00044325643],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99978966,0.000019855814,0.000013884733,0.00003656483,0.00008875638,0.000051309402],"domain_scores_gemma":[0.9995407,0.0001623117,0.0001315678,0.000045241744,0.000077998186,0.000042220207],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019664747,0.0002965084,0.00022541548,0.00024079619,0.00017927754,0.00037109188,0.00017627525,0.00025650143,0.0013608405],"category_scores_gemma":[0.0007215793,0.00022364568,0.00035873285,0.0003101539,0.00022270942,0.00032686646,0.00019013103,0.00043083707,0.00022614913],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00019136738,0.000026710886,0.0005904877,0.000029876368,0.0000058623173,0.000036471138,0.000029429873,0.00016000662,0.99740183,0.000027936469,0.000021706312,0.0014784827],"study_design_scores_gemma":[0.000005281884,0.00023674955,0.0048437687,0.0000025117495,0.00001023873,0.000024990108,0.000027798727,0.0005498249,0.99409735,0.000009082698,0.00018874583,0.0000036481667],"about_ca_topic_score_codex":0.0006843249,"about_ca_topic_score_gemma":0.0010720335,"teacher_disagreement_score":0.0013608405,"about_ca_system_score_codex":0.00025244942,"about_ca_system_score_gemma":0.00014212972,"threshold_uncertainty_score":0.004552424},"labels":[],"label_agreement":null},{"id":"W4323276161","doi":"10.1016/j.powtec.2023.118395","title":"Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding","year":2023,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Rio Tinto (Canada); École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Metal injection molding; Iron powder; Raw material; Ultimate tensile strength; Molding (decorative); Sintering; Metal powder; Composite material; Viscosity; Ceramic; Microstructure; Particle size; Metallurgy; Relative density; Carbonyl iron; Powder metallurgy; Particle (ecology); Metal; Chemical engineering","score_opus":0.013486748390145678,"score_gpt":0.21009477867789708,"score_spread":0.1966080302877514,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4323276161","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99890697,0.0001595031,0.00039753836,0.000009915032,0.000007781004,0.0000049562755,0.000044774362,0.000012420995,0.00045616503],"genre_scores_gemma":[0.9992687,0.00009683109,0.0002966444,0.0000055712026,0.0000030355632,0.0000039990564,0.00004299473,0.000012793442,0.00026943325],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99975985,0.000030548166,0.000031227,0.00006250766,0.00007781993,0.000038009108],"domain_scores_gemma":[0.99923384,0.00037593945,0.00016708387,0.000052183397,0.0001254962,0.000045361252],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002938039,0.00024078517,0.0002510599,0.00022480526,0.00014305674,0.0003868507,0.00016896808,0.00023772796,0.0010672524],"category_scores_gemma":[0.0011092045,0.00019049848,0.00021243092,0.0002710029,0.0002623341,0.0003925257,0.00015901649,0.00030322972,0.00021172783],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00043637864,0.00004757766,0.0009568535,0.000066749155,0.000009999876,0.00007868896,0.000046611083,0.0006117246,0.9950264,0.000048863414,0.000024562527,0.0026455591],"study_design_scores_gemma":[0.000009483349,0.0003505533,0.005057909,0.000003045949,0.000016636082,0.000031755502,0.000027467737,0.0012623976,0.993038,0.0000125463575,0.00018424311,0.000005859702],"about_ca_topic_score_codex":0.00060620595,"about_ca_topic_score_gemma":0.0012582463,"teacher_disagreement_score":0.0010672524,"about_ca_system_score_codex":0.00020953297,"about_ca_system_score_gemma":0.00016816941,"threshold_uncertainty_score":0.0035703182},"labels":[],"label_agreement":null},{"id":"W4360783462","doi":"10.2139/ssrn.4398208","title":"Thermo-Viscoelastic Multiscale Homogenization of Additively Manufactured Short Fiber Reinforced Polymers from Direct Microstructure Characterization","year":2023,"lang":"en","type":"article","venue":"SSRN Electronic Journal","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Homogenization (climate); Microstructure; Materials science; Viscoelasticity; Composite material; Characterization (materials science); Polymer; Nanotechnology","score_opus":0.005177830012814446,"score_gpt":0.18944405207976997,"score_spread":0.18426622206695553,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4360783462","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9808928,0.00031423997,0.016941996,0.000023792265,0.0000124123435,0.000018500601,0.00017097562,0.00009167546,0.0015336572],"genre_scores_gemma":[0.9949654,0.00013012992,0.004210658,0.0000075913117,0.0000053107406,0.000014445262,0.00008119538,0.000019234712,0.0005659977],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999205,0.000005396725,0.0000036524357,0.000023398661,0.000035690406,0.000011359983],"domain_scores_gemma":[0.9999194,0.00002665321,0.00002264554,0.000010019079,0.000014815616,0.0000064277374],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011724948,0.00016462267,0.00013759322,0.0002382987,0.00010878659,0.00020399569,0.00010525769,0.00014628127,0.00096902135],"category_scores_gemma":[0.00017388222,0.00012601292,0.00013799817,0.00017163961,0.00019994406,0.00026452699,0.00016558456,0.00030410173,0.00014666156],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001435047,0.0000055184028,0.00013104644,0.0000159985,0.0000017623616,0.000017591803,0.000024376008,0.00031136815,0.9975101,0.000071489245,0.000013665357,0.0018826207],"study_design_scores_gemma":[0.000002493664,0.00006996793,0.0059338445,0.000004115908,0.000010222511,0.000044614808,0.000022861872,0.010021383,0.9833113,0.00004015549,0.0005333996,0.0000056758427],"about_ca_topic_score_codex":0.000296362,"about_ca_topic_score_gemma":0.000761258,"teacher_disagreement_score":0.00096902135,"about_ca_system_score_codex":0.0001275604,"about_ca_system_score_gemma":0.00009467724,"threshold_uncertainty_score":0.0032417178},"labels":[],"label_agreement":null},{"id":"W4367399684","doi":"10.1061/jmcee7.mteng-15212","title":"Comprehensive Investigation of Influential Mix-Design Factors on the Microsurfacing Mixture Performance","year":2023,"lang":"en","type":"article","venue":"Journal of Materials in Civil Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Civil engineering; Construction engineering; Engineering","score_opus":0.02818180293008353,"score_gpt":0.20711470909480773,"score_spread":0.17893290616472418,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4367399684","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96720785,0.0058209915,0.02286047,0.00007591577,0.000048390164,0.00021583553,0.00034879264,0.00025395746,0.0031678497],"genre_scores_gemma":[0.9840206,0.0021367997,0.011902266,0.000038208884,0.00001337092,0.0001258238,0.000268125,0.00010111866,0.0013936885],"study_design_codex":"bench_or_experimental","study_design_gemma":"observational","domain_scores_codex":[0.99863607,0.00019672795,0.00013788891,0.00021422132,0.000712461,0.00010265217],"domain_scores_gemma":[0.99893194,0.00036304703,0.00029482966,0.000060246824,0.00029062573,0.0000591703],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0015540348,0.00093286217,0.00077737635,0.0010319891,0.00034519774,0.0010333507,0.00042737776,0.0004328359,0.001832841],"category_scores_gemma":[0.0022445747,0.00028133823,0.0005176757,0.0008463128,0.00019119745,0.001090162,0.0005887468,0.00041102522,0.0007359627],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0008789123,0.0004029718,0.018056715,0.0014132244,0.00019417601,0.00026253704,0.0001094982,0.00788168,0.90534705,0.00032258334,0.00026775725,0.06486292],"study_design_scores_gemma":[0.00002505505,0.0024742023,0.03614978,0.00005495365,0.00048584334,0.0003589985,0.00019330868,0.019136844,0.934516,0.00015517509,0.0063798195,0.000069970374],"about_ca_topic_score_codex":0.00078771816,"about_ca_topic_score_gemma":0.0018469917,"teacher_disagreement_score":0.001832841,"about_ca_system_score_codex":0.00046976394,"about_ca_system_score_gemma":0.0004839367,"threshold_uncertainty_score":0.008218646},"labels":[],"label_agreement":null},{"id":"W4379141428","doi":"10.1080/00325899.2023.2218678","title":"Mold filling behaviour of LPIM feedstocks using numerical simulations and real-scale injections","year":2023,"lang":"en","type":"article","venue":"Powder Metallurgy","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mold; Materials science; Bar (unit); Flow (mathematics); Scale (ratio); Raw material; Composite material; Mechanics; Computer simulation; Die (integrated circuit); Nanotechnology","score_opus":0.0320827110545247,"score_gpt":0.26278857815966733,"score_spread":0.23070586710514263,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4379141428","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97851276,0.00012932783,0.0159152,0.00004220612,0.000017598759,0.0000580678,0.00047241442,0.00038208262,0.0044702752],"genre_scores_gemma":[0.9890603,0.000082993996,0.009813501,0.000006521587,0.0000026459459,0.00004942271,0.00018586504,0.0000437502,0.0007550315],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998524,0.000014496928,0.0000107573915,0.000027077424,0.00007032397,0.000024914672],"domain_scores_gemma":[0.99963295,0.00019473034,0.0000600331,0.00003906674,0.000061242376,0.000011922572],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003115967,0.00037956506,0.00043126958,0.00033080176,0.00024621922,0.00061614654,0.0005022831,0.00056482304,0.0015424378],"category_scores_gemma":[0.00080258475,0.00017391187,0.00030126018,0.00039235264,0.0003938212,0.00039267013,0.00021496357,0.00035552145,0.00019400418],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00041659462,0.00034150464,0.004354471,0.00055171613,0.00002725418,0.00031577903,0.00037252952,0.76220787,0.20746157,0.0022697982,0.0004117003,0.021269295],"study_design_scores_gemma":[0.000026133695,0.00015758726,0.0014130113,0.000014241798,0.000009002721,0.000031657797,0.00005673785,0.90961397,0.08751716,0.00020772297,0.0009362277,0.00001658507],"about_ca_topic_score_codex":0.0024117266,"about_ca_topic_score_gemma":0.001554769,"teacher_disagreement_score":0.0024117266,"about_ca_system_score_codex":0.000583122,"about_ca_system_score_gemma":0.00038063238,"threshold_uncertainty_score":0.0051600337},"labels":[],"label_agreement":null},{"id":"W4386223084","doi":"10.4028/p-s9nhqr","title":"An Application of Injection Molding to Semisolid Processing of Metallic Alloys: A Role of SIMA in Feedstock Transformation","year":2023,"lang":"en","type":"article","venue":"Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Natural Resources Canada","funders":"","keywords":"Materials science; Sima; Raw material; Shearing (physics); Plunger; Metallurgy; Molding (decorative); Formability; Composite material; Mechanical engineering","score_opus":0.027030418742252375,"score_gpt":0.2893487715119153,"score_spread":0.2623183527696629,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4386223084","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8022416,0.039982747,0.11635593,0.0008013794,0.00029919125,0.00010542489,0.0001959597,0.00051507767,0.03950271],"genre_scores_gemma":[0.96891564,0.007589693,0.019466171,0.00007085195,0.00003787946,0.000017941706,0.00007067178,0.000039679468,0.0037913546],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99988496,0.000015054682,0.0000073595334,0.00003428331,0.000042731986,0.00001545246],"domain_scores_gemma":[0.9999138,0.000023626322,0.000020081903,0.000019699983,0.000015856911,0.000006996981],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00018868012,0.00026977272,0.00020719031,0.00031659714,0.00019819895,0.0005322767,0.00022015249,0.00029820172,0.00094082736],"category_scores_gemma":[0.00020434162,0.00019305444,0.00032016364,0.00031087772,0.0005441756,0.000451333,0.00031885717,0.000556923,0.0004342265],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00011260908,0.00006733847,0.00061096734,0.00037469674,0.00001260221,0.00019661541,0.0001578459,0.0018816435,0.9380066,0.015541359,0.00020721147,0.042830482],"study_design_scores_gemma":[0.000008467237,0.00035744233,0.0009781553,0.000023235338,0.000012859863,0.00021225405,0.000031129937,0.0053451243,0.97495306,0.0018869203,0.016177494,0.000013812114],"about_ca_topic_score_codex":0.00025525186,"about_ca_topic_score_gemma":0.00031787346,"teacher_disagreement_score":0.00094082736,"about_ca_system_score_codex":0.00033036937,"about_ca_system_score_gemma":0.00019574318,"threshold_uncertainty_score":0.0031473637},"labels":[],"label_agreement":null},{"id":"W4386697354","doi":"10.20944/preprints202309.0831.v1","title":"Injection Flow Rate Threshold Preventing Atypical In-Cavity Pressure during Low-Pressure Powder Injection Molding","year":2023,"lang":"en","type":"preprint","venue":"Preprints.org","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Mold; Molding (decorative); Composite material; Viscosity; Volumetric flow rate; Metal injection molding; Raw material; Transfer molding; Flow (mathematics); Injection moulding; Melt flow index; Weld line; Welding; Polymer; Mechanics; Sintering; Chemistry","score_opus":0.06971894992119548,"score_gpt":0.29280864417777297,"score_spread":0.2230896942565775,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4386697354","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9596225,0.0004302271,0.03753032,0.00004966339,0.000033808272,0.000079637844,0.00011778379,0.00075913494,0.0013768679],"genre_scores_gemma":[0.99272776,0.00009187623,0.0068386486,0.000010693376,0.0000046840637,0.000027972821,0.000041393934,0.00005297365,0.00020389231],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99948573,0.000044341286,0.000032475604,0.00010265156,0.00023316988,0.00010149889],"domain_scores_gemma":[0.9988003,0.00047542824,0.00040429807,0.00011567713,0.00015683463,0.000047425197],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00065184664,0.00042862442,0.0004768326,0.00030455174,0.00018447456,0.0007210472,0.0005438218,0.00038672626,0.0010076818],"category_scores_gemma":[0.001896929,0.00022334779,0.00022674505,0.00018683671,0.00047936485,0.0007201322,0.00035896327,0.0005527349,0.00024636014],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00030449807,0.000110044144,0.0020697755,0.00020522851,0.000007243504,0.000107067826,0.00008381671,0.004488147,0.9817624,0.00036865324,0.000096004915,0.010397014],"study_design_scores_gemma":[0.000013728382,0.00030930556,0.0033252833,0.000009638096,0.000009689468,0.0000305209,0.000016287984,0.017936343,0.977792,0.00009113805,0.0004557415,0.000010225122],"about_ca_topic_score_codex":0.00040037936,"about_ca_topic_score_gemma":0.00042305133,"teacher_disagreement_score":0.0010076818,"about_ca_system_score_codex":0.00039379852,"about_ca_system_score_gemma":0.00041765507,"threshold_uncertainty_score":0.0034473538},"labels":[],"label_agreement":null},{"id":"W4388498468","doi":"10.3390/powders2040044","title":"Injection Flow Rate Threshold Preventing Atypical In-Cavity Pressure during Low-Pressure Powder Injection Molding","year":2023,"lang":"en","type":"article","venue":"Powders","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Mold; Molding (decorative); Composite material; Viscosity; Volumetric flow rate; Metal injection molding; Raw material; Transfer molding; Melt flow index; Weld line; Injection moulding; Flow (mathematics); Welding; Polymer; Mechanics; Sintering; Chemistry","score_opus":0.012571730561597815,"score_gpt":0.2225988554925028,"score_spread":0.21002712493090497,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4388498468","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96695954,0.00034946497,0.03092618,0.000037102687,0.00002249053,0.000064193584,0.000083749306,0.0004875213,0.0010696622],"genre_scores_gemma":[0.9937795,0.000086683685,0.0058725597,0.000008707396,0.0000035842284,0.000023891405,0.00003057282,0.000032492277,0.00016205582],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999602,0.0000351352,0.000026586675,0.00007827669,0.00018180463,0.000076161385],"domain_scores_gemma":[0.99909353,0.0003608276,0.0003309658,0.000074120806,0.00010809349,0.000032412434],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005343319,0.00036682028,0.00041332026,0.00025879528,0.00016305887,0.0005698376,0.00048806387,0.00032680694,0.00082623947],"category_scores_gemma":[0.0014579681,0.00019800439,0.00021944812,0.0001627471,0.0004283932,0.0006462643,0.00028991335,0.00046417763,0.00018342778],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00023157908,0.00008691166,0.0018271275,0.00016201382,0.0000059739805,0.00008650739,0.00006720947,0.0039537246,0.9845755,0.00030694547,0.000064491374,0.008632069],"study_design_scores_gemma":[0.000012419856,0.00031107763,0.003228441,0.000007834689,0.000009213805,0.000028316257,0.000014893554,0.017231617,0.9786805,0.00007357122,0.000392742,0.0000094735215],"about_ca_topic_score_codex":0.00039619562,"about_ca_topic_score_gemma":0.00045942346,"teacher_disagreement_score":0.00082623947,"about_ca_system_score_codex":0.00035928885,"about_ca_system_score_gemma":0.00036652648,"threshold_uncertainty_score":0.0028257966},"labels":[],"label_agreement":null},{"id":"W4389741493","doi":"10.1108/rpj-08-2023-0266","title":"Optimization of the printability envelope of low-viscosity powder-binder feedstocks used in material extrusion 3D printing","year":2023,"lang":"en","type":"article","venue":"Rapid Prototyping Journal","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Extrusion; Materials science; Rheology; Viscosity; Rheometry; Composite material; Mold; 3D printing; Molding (decorative); Nozzle; Raw material; Shear rate; Envelope (radar); Extrusion moulding; Metal injection molding; Plastics extrusion; Sintering; Mechanical engineering; Chemistry; Computer science","score_opus":0.016092829307483986,"score_gpt":0.2226364874615809,"score_spread":0.20654365815409692,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4389741493","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9843783,0.00079682824,0.013042154,0.000021141519,0.000009845447,0.00003390706,0.0001650513,0.00006953795,0.0014833199],"genre_scores_gemma":[0.9893506,0.0004872566,0.009266766,0.000012761303,0.000004737401,0.000031915904,0.00014621037,0.000036721565,0.0006629129],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9995844,0.000043028987,0.00004380031,0.000077462006,0.00020907921,0.00004213014],"domain_scores_gemma":[0.9996501,0.00008399397,0.0001488642,0.000030457608,0.00006467917,0.00002184014],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00035047985,0.00032279204,0.0002851942,0.00043327262,0.00014370178,0.0005079667,0.00020011055,0.00025880613,0.00069249584],"category_scores_gemma":[0.0006400305,0.00015873836,0.00032573382,0.0004158849,0.00015551009,0.0004360126,0.00020338275,0.00047550493,0.00029342627],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006688392,0.000024492725,0.0004943007,0.00006276467,0.000005422805,0.000054208016,0.000015200818,0.00065390655,0.9949144,0.000052202035,0.000010105071,0.0036460261],"study_design_scores_gemma":[0.0000033718725,0.00016105824,0.002506527,0.0000053063695,0.000010909396,0.00006007812,0.00001263132,0.0014625511,0.9952602,0.000020707512,0.00049189833,0.0000048439983],"about_ca_topic_score_codex":0.00031389852,"about_ca_topic_score_gemma":0.0007390354,"teacher_disagreement_score":0.00069249584,"about_ca_system_score_codex":0.0002743657,"about_ca_system_score_gemma":0.00015329935,"threshold_uncertainty_score":0.0023165941},"labels":[],"label_agreement":null},{"id":"W4391890455","doi":"10.1039/d3ta06274k","title":"Inverse design of porous materials: a diffusion model approach","year":2024,"lang":"en","type":"article","venue":"Journal of Materials Chemistry A","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":38,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Toronto","funders":"National Supercomputing Center, Korea Institute of Science and Technology Information; Natural Sciences and Engineering Research Council of Canada; National Research Foundation of Korea; National Research Foundation","keywords":"Diffusion; Domain (mathematical analysis); Inverse; Porosity; Porous medium; Computer science; Materials science; Mathematics; Geometry; Composite material; Physics; Thermodynamics; Mathematical analysis","score_opus":0.027027000641963537,"score_gpt":0.21844202226736448,"score_spread":0.19141502162540094,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4391890455","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0080893235,0.00016535183,0.9871661,0.0001310224,0.000017403123,0.00003699356,0.000021838569,0.000115965784,0.0042559826],"genre_scores_gemma":[0.6014156,0.00083916297,0.38776124,0.00012988492,0.00002815599,0.00045029033,0.00008486139,0.0001312818,0.009159626],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998272,0.000043122185,0.000006084501,0.000028465029,0.00008059882,0.00001454854],"domain_scores_gemma":[0.9997533,0.00014649802,0.000022424949,0.00002054666,0.00004633521,0.000010902564],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005051399,0.00041582936,0.0006128971,0.00033846195,0.00022723805,0.0007617877,0.00067574176,0.00089110766,0.0015052481],"category_scores_gemma":[0.000949507,0.0004898219,0.00063119835,0.0002176021,0.00064493367,0.00067285215,0.00070569874,0.000782907,0.00031243704],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000063052736,0.00005326771,0.00015665809,0.00021737632,0.000022858892,0.000065844506,0.00007849061,0.87150323,0.035316307,0.06990975,0.0004596256,0.02215353],"study_design_scores_gemma":[0.000010691851,0.000043503947,0.000027129243,0.000007765472,0.0000053827002,0.000019807787,0.00000784422,0.9896645,0.0040129097,0.0045380364,0.0016559421,0.0000064865494],"about_ca_topic_score_codex":0.0010524417,"about_ca_topic_score_gemma":0.00093980733,"teacher_disagreement_score":0.0015052481,"about_ca_system_score_codex":0.000552112,"about_ca_system_score_gemma":0.0007617877,"threshold_uncertainty_score":0.005035579},"labels":[],"label_agreement":null},{"id":"W4394684679","doi":"10.18686/cest.v2i2.134","title":"Polymeric field synergy principle: Revealing the intrinsic mechanism of screw channel optimization to enhance thermal management and process efficiency","year":2024,"lang":"en","type":"article","venue":"Clean Energy Science and Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Natural Science Foundation of Shandong Province; University of Toronto; National Natural Science Foundation of China","keywords":"Mechanism (biology); Process (computing); Field (mathematics); Channel (broadcasting); Thermal; Materials science; Mechanical engineering; Process engineering; Nanotechnology; Computer science; Biochemical engineering; Engineering; Physics; Thermodynamics; Mathematics; Telecommunications","score_opus":0.004550606288130995,"score_gpt":0.22279171084125654,"score_spread":0.21824110455312554,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4394684679","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.6693029,0.0007791496,0.31754354,0.00015120285,0.000042783522,0.00007907861,0.000067367524,0.00049555243,0.011538533],"genre_scores_gemma":[0.9781822,0.00018150987,0.020942353,0.000014431197,0.000005630734,0.000023777304,0.000013707623,0.00001695564,0.0006193823],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999889,0.000015503449,0.000006220342,0.000023693834,0.000041016887,0.000024529842],"domain_scores_gemma":[0.99990475,0.000029574321,0.000028844523,0.000011381775,0.000016410777,0.000008960176],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00029493857,0.00033239348,0.00021556186,0.00037043198,0.00017064191,0.00038871422,0.00026049124,0.00025583245,0.0013077174],"category_scores_gemma":[0.00028466393,0.00016406635,0.00023424077,0.00021886847,0.0004134479,0.00066199264,0.00034059118,0.00023825758,0.00015639966],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00024646436,0.000104943225,0.0019234108,0.00018903676,0.000022488108,0.00011267551,0.00006026877,0.058175113,0.87161124,0.022042217,0.00024369241,0.045268428],"study_design_scores_gemma":[0.00006136994,0.00079631264,0.0033541971,0.000020622743,0.000034929006,0.00019765376,0.00006436521,0.4268825,0.5579363,0.0051652137,0.005446451,0.000040088034],"about_ca_topic_score_codex":0.00016463084,"about_ca_topic_score_gemma":0.00029974148,"teacher_disagreement_score":0.0013077174,"about_ca_system_score_codex":0.00020038072,"about_ca_system_score_gemma":0.00034114913,"threshold_uncertainty_score":0.004374802},"labels":[],"label_agreement":null},{"id":"W4396806983","doi":"10.5267/j.esm.2024.1.002","title":"Study on the influence of injection molding parameters on the warpage using simulation and Taguchi method","year":2024,"lang":"en","type":"article","venue":"Engineering Solid Mechanics","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Taguchi methods; Molding (decorative); Materials science; Composite material; Mechanical engineering; Engineering drawing; Structural engineering; Engineering","score_opus":0.04004343069802693,"score_gpt":0.29118562472707127,"score_spread":0.25114219402904436,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4396806983","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7450573,0.0011169853,0.25069478,0.00007802177,0.00005186408,0.00007941809,0.00008802141,0.00036196556,0.0024717299],"genre_scores_gemma":[0.9605777,0.00043717364,0.038367428,0.000012991153,0.0000055734295,0.000048254464,0.000052732677,0.000029205132,0.00046881268],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9995435,0.00011192774,0.000040031042,0.00006391466,0.00018679608,0.000053714837],"domain_scores_gemma":[0.99887806,0.00077071524,0.00013197868,0.00005697897,0.0001479397,0.000014383024],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00078644574,0.000604315,0.0005870501,0.00044991504,0.00021362462,0.0004366937,0.0003032644,0.00036050138,0.00047864183],"category_scores_gemma":[0.0013996563,0.00036535916,0.00062723196,0.00047847282,0.0002211491,0.00046324058,0.0001676051,0.00035095614,0.000085797095],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00034868796,0.00024678625,0.011254016,0.0006415029,0.0001005028,0.0002344337,0.0003436453,0.4902916,0.4158029,0.0013734038,0.00029891805,0.07906349],"study_design_scores_gemma":[0.000017165825,0.00053824484,0.0032053355,0.000017514729,0.00008368369,0.00007912299,0.00004673673,0.7898918,0.20502442,0.00023138952,0.00082165306,0.000042964097],"about_ca_topic_score_codex":0.0011302286,"about_ca_topic_score_gemma":0.0012450401,"teacher_disagreement_score":0.0011302286,"about_ca_system_score_codex":0.00026644918,"about_ca_system_score_gemma":0.0003212065,"threshold_uncertainty_score":0.0041591525},"labels":[],"label_agreement":null},{"id":"W4396883662","doi":"10.1016/j.engappai.2024.108602","title":"Recognition of local fiber orientation state in prepreg platelet molded composites via deep learning","year":2024,"lang":"en","type":"article","venue":"Engineering Applications of Artificial Intelligence","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":7,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Old Dominion University","keywords":"Composite material; Computer science; Fiber; Orientation (vector space); Materials science; Geometry","score_opus":0.01428348504715468,"score_gpt":0.23899600407288765,"score_spread":0.22471251902573297,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4396883662","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8592381,0.0002153012,0.13805653,0.00008675898,0.000035833877,0.0000105816,0.00018152497,0.0006573994,0.0015179822],"genre_scores_gemma":[0.98500395,0.00007909657,0.013871439,0.000016247703,0.0000057670086,0.0000048528127,0.00013097815,0.000018679353,0.00086904765],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99997365,0.0000023689681,8.932036e-7,0.00000917716,0.0000073466517,0.000006545274],"domain_scores_gemma":[0.9999298,0.00001704145,0.000019861098,0.000009201067,0.000015873762,0.000008196674],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00008709051,0.0002536345,0.00014785833,0.000284681,0.000094090516,0.00018159965,0.00019466608,0.00023872555,0.00046080616],"category_scores_gemma":[0.00016280609,0.00012479251,0.00017981904,0.00018464788,0.00016045797,0.00027327603,0.00016167325,0.00032427817,0.00012689411],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0008433504,0.00023431829,0.011033178,0.00012981829,0.00006560795,0.00027667062,0.00007064751,0.18084916,0.5827374,0.0020587363,0.0016329071,0.22006832],"study_design_scores_gemma":[0.00000357408,0.000035964604,0.0031832063,0.0000027742792,0.000009481345,0.000026800517,0.000011840734,0.94849515,0.04759466,0.00040820628,0.0002213851,0.0000069336047],"about_ca_topic_score_codex":0.0019347362,"about_ca_topic_score_gemma":0.0042054974,"teacher_disagreement_score":0.0019347362,"about_ca_system_score_codex":0.00019317817,"about_ca_system_score_gemma":0.00017854638,"threshold_uncertainty_score":0.0038468838},"labels":[],"label_agreement":null},{"id":"W4399513911","doi":"10.1021/acs.macromol.3c02502","title":"Interplay between Chain Relaxation Time and Melt Crystallization Time in Microinjection Molding of Polyoxymethylene","year":2024,"lang":"en","type":"article","venue":"Macromolecules","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":10,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"State Key Laboratory of Polymer Materials Engineering; China Postdoctoral Science Foundation; National Natural Science Foundation of China; Deutsche Forschungsgemeinschaft","keywords":"Polyoxymethylene; Crystallization; Differential scanning calorimetry; Materials science; Crystallization of polymers; Rheology; Molding (decorative); Relaxation (psychology); Polarized light microscopy; Optical microscope; Composite material; Polymer; Polymer chemistry; Thermodynamics; Scanning electron microscope; Chemistry; Optics; Organic chemistry","score_opus":0.006023296236923844,"score_gpt":0.22329525269598294,"score_spread":0.21727195645905908,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4399513911","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99575907,0.00036904233,0.0034012045,0.000018385796,0.000005552684,0.0000073437814,0.000023406985,0.00002872307,0.00038722303],"genre_scores_gemma":[0.9989673,0.00012956426,0.0006640646,0.0000031119853,0.0000018865821,0.0000046839828,0.000015207861,0.000010068362,0.00020409482],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9999232,0.000010160042,0.0000034441312,0.000022342001,0.000019325214,0.000021554579],"domain_scores_gemma":[0.9997589,0.00013104634,0.000061653234,0.000011133884,0.000019096895,0.0000182713],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019304027,0.00017944977,0.00014110385,0.00017575061,0.00013402275,0.00018116037,0.00011741417,0.00012257847,0.00057754345],"category_scores_gemma":[0.00045787904,0.00013957419,0.00014583045,0.00014401879,0.00022442684,0.00030359853,0.000089591296,0.00030928667,0.00008506359],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00010556029,0.000018175602,0.0008093314,0.000024263032,0.0000037231355,0.000035401998,0.00006702613,0.0008615383,0.9951669,0.00015296704,0.000012736237,0.0027424423],"study_design_scores_gemma":[0.000004750196,0.000093770905,0.0039755553,0.0000035300222,0.000008235806,0.00002483142,0.00001449396,0.012469037,0.98323214,0.000039797982,0.00012852631,0.000005325495],"about_ca_topic_score_codex":0.0007378254,"about_ca_topic_score_gemma":0.00093476934,"teacher_disagreement_score":0.0007378254,"about_ca_system_score_codex":0.0002810586,"about_ca_system_score_gemma":0.00022128849,"threshold_uncertainty_score":0.0020393133},"labels":[],"label_agreement":null},{"id":"W4400002399","doi":"10.3390/polym16131796","title":"Injection Molding of Polymers and Polymer Composites","year":2024,"lang":"en","type":"editorial","venue":"Polymers","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"China Postdoctoral Science Foundation; National Natural Science Foundation of China","keywords":"Materials science; Molding (decorative); Aerospace; Polymer; Composite material; Electronics; Electronic packaging; Engineering","score_opus":0.00624005937476235,"score_gpt":0.21604129616714352,"score_spread":0.20980123679238116,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4400002399","genre_codex":"editorial","genre_gemma":"editorial","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"editorial","genre_consensus":"editorial","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.00013448021,0.054536823,0.00063727715,0.01775228,0.9206438,0.00003310135,0.000044118442,0.00008976931,0.0061284155],"genre_scores_gemma":[0.002827699,0.07939777,0.0011864543,0.04278941,0.8009462,0.00008495346,0.000098325625,0.00014214875,0.072527155],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99780923,0.00027458376,0.00028226734,0.00026421223,0.0012669167,0.000102850936],"domain_scores_gemma":[0.99592245,0.0019294171,0.0003544951,0.0001664438,0.0012680981,0.00035914956],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.003028182,0.0020980341,0.0012425457,0.0016193443,0.0012162721,0.0026522675,0.0016875258,0.0073725185,0.003916944],"category_scores_gemma":[0.0065193973,0.00081308413,0.0011008258,0.00083256286,0.0020168235,0.0027446812,0.0010802915,0.011310885,0.0050932784],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006316666,0.000023923467,0.000019867346,0.00075536995,0.000020006713,0.00021798245,0.000019910574,0.0000778959,0.0011827062,0.002177754,0.94890267,0.046538714],"study_design_scores_gemma":[0.00001447599,0.000020619018,0.0000611232,0.00011987571,0.000009339193,0.0001530204,0.000004817993,0.000048700163,0.00069629826,0.0006076341,0.9982559,0.000008194728],"about_ca_topic_score_codex":0.001220722,"about_ca_topic_score_gemma":0.003355454,"teacher_disagreement_score":0.0073725185,"about_ca_system_score_codex":0.0015676863,"about_ca_system_score_gemma":0.0016559449,"threshold_uncertainty_score":0.016014755},"labels":[],"label_agreement":null},{"id":"W4400698187","doi":"10.1016/j.heliyon.2024.e34655","title":"Linking mechanochemistry with the green chemistry principles: Review article","year":2024,"lang":"en","type":"review","venue":"Heliyon","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":47,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Universitat Politècnica de Catalunya; United Nations Educational, Scientific and Cultural Organization","keywords":"Mechanochemistry; Ball mill; Nanotechnology; Extrusion; Green chemistry; Process engineering; Materials science; Mechanical engineering; Engineering; Chemistry; Chemical engineering; Organic chemistry; Metallurgy; Catalysis; Reaction mechanism","score_opus":0.03765017602331658,"score_gpt":0.2661883546077822,"score_spread":0.2285381785844656,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4400698187","genre_codex":"review","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"review","genre_consensus":"review","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0003032789,0.99681145,0.00031787725,0.00014961883,0.00034664207,0.000007558614,0.000016174528,0.000011438643,0.0020359051],"genre_scores_gemma":[0.0015222755,0.9964334,0.00041581367,0.00011654974,0.00025921094,0.000008427205,0.00002322093,0.0000023113982,0.0012187726],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.9997838,0.000021801688,0.00002596551,0.000048080565,0.00009027582,0.000030152421],"domain_scores_gemma":[0.99974877,0.000098961376,0.00004587863,0.000010583025,0.0000723353,0.000023461313],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00040773166,0.001161245,0.0010731667,0.0028210725,0.00035025357,0.0013045111,0.0006683685,0.00082287943,0.004494939],"category_scores_gemma":[0.00049248314,0.00033679188,0.00051894685,0.0037943888,0.00049516885,0.001677343,0.0007826538,0.0012548245,0.0018950881],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000058741025,0.0001606372,0.00020217846,0.0474691,0.00011705198,0.00033343432,0.00012689682,0.0007809291,0.010083894,0.008501092,0.025815481,0.9063505],"study_design_scores_gemma":[0.0000061768314,0.00008697916,0.0005519215,0.0034144465,0.00010113256,0.0009691754,0.00006128971,0.000120900455,0.0026479377,0.0016944538,0.99032646,0.000019146568],"about_ca_topic_score_codex":0.00081455096,"about_ca_topic_score_gemma":0.0012474325,"teacher_disagreement_score":0.004494939,"about_ca_system_score_codex":0.0005930162,"about_ca_system_score_gemma":0.0011843042,"threshold_uncertainty_score":0.01503706},"labels":[],"label_agreement":null},{"id":"W4401946118","doi":"10.1016/j.compositesa.2024.108437","title":"Deep learning-based microstructure analysis of multi-component heterogeneous composites during preparation","year":2024,"lang":"en","type":"article","venue":"Composites Part A Applied Science and Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Object Research Systems (Canada)","funders":"National Natural Science Foundation of China","keywords":"Materials science; Microstructure; Composite material; Component (thermodynamics)","score_opus":0.008763634130716763,"score_gpt":0.22459678647826842,"score_spread":0.21583315234755165,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4401946118","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.89171743,0.00025705603,0.10464351,0.00009429871,0.000026631902,0.000019121784,0.00026736662,0.0004949383,0.0024796054],"genre_scores_gemma":[0.9854402,0.000058689635,0.013385021,0.000011676876,0.0000034314307,0.000006719537,0.00013120074,0.000024013518,0.00093894196],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999474,0.0000036634112,0.0000021894305,0.000014368573,0.000019683668,0.000012746943],"domain_scores_gemma":[0.9998834,0.00003111937,0.000024184532,0.000010664901,0.000040501043,0.0000100101615],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00015052679,0.00022910704,0.00018645904,0.0004177072,0.0001292121,0.00022929478,0.00025282663,0.00024511392,0.0008769108],"category_scores_gemma":[0.00023271966,0.00016489901,0.00021209354,0.00026983267,0.0001819895,0.00032446155,0.00018243756,0.00028448133,0.00013166065],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00046457117,0.00022835449,0.009653995,0.00014777824,0.000044678585,0.00016262228,0.000097892465,0.29011,0.5763035,0.0016817135,0.0010721772,0.12003279],"study_design_scores_gemma":[0.000002822502,0.000034325945,0.0054750005,0.0000026218743,0.000008003493,0.00001993011,0.000014291794,0.94472784,0.049159955,0.00027634736,0.00027170233,0.000007060008],"about_ca_topic_score_codex":0.0036637539,"about_ca_topic_score_gemma":0.007890103,"teacher_disagreement_score":0.0036637539,"about_ca_system_score_codex":0.00037447488,"about_ca_system_score_gemma":0.00036426834,"threshold_uncertainty_score":0.00728482},"labels":[],"label_agreement":null},{"id":"W4402306202","doi":"10.1016/j.ifacol.2024.08.410","title":"Enhancing process flowsheet design through masked hybrid Proximal Policy Optimization","year":2024,"lang":"en","type":"article","venue":"IFAC-PapersOnLine","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Process (computing); Computer science; Process engineering; Engineering; Operating system","score_opus":0.016685369136186776,"score_gpt":0.2552166625662387,"score_spread":0.23853129343005192,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4402306202","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.021598104,0.00007696921,0.9761795,0.000061668215,0.000019171104,0.00005124014,0.000014375882,0.00020666563,0.0017921891],"genre_scores_gemma":[0.71034974,0.00013713686,0.28626207,0.0000692407,0.000019536907,0.00017004588,0.000048928774,0.00006957179,0.0028737136],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9996087,0.00011920799,0.00001595484,0.00006987915,0.0001324894,0.000053816377],"domain_scores_gemma":[0.99944526,0.00030992602,0.000074506206,0.000055579978,0.00007447346,0.000040243598],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001010169,0.00072427443,0.0005901752,0.00032279143,0.00028599333,0.000766391,0.0006949145,0.00084797124,0.0018254919],"category_scores_gemma":[0.0016659747,0.00041068878,0.0004877802,0.0001917969,0.0006949423,0.0006621242,0.0010324843,0.00097094825,0.00035569692],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000062633044,0.00004088952,0.00021126885,0.000042530053,0.0000149581265,0.000031916636,0.000027376602,0.97329074,0.0052200006,0.004971499,0.00013684662,0.015949303],"study_design_scores_gemma":[0.000006661478,0.000049952752,0.00002443001,0.0000026208163,0.0000028050617,0.0000063811167,0.000003363571,0.9968021,0.0014354105,0.0013332496,0.00033073715,0.0000022580311],"about_ca_topic_score_codex":0.0010420945,"about_ca_topic_score_gemma":0.001032562,"teacher_disagreement_score":0.0018254919,"about_ca_system_score_codex":0.00043424556,"about_ca_system_score_gemma":0.0014784801,"threshold_uncertainty_score":0.0061068535},"labels":[],"label_agreement":null},{"id":"W4402309762","doi":"10.1016/j.ifacol.2024.08.381","title":"Utilizing Neural Networks for Image-based Model Predictive Controller of a batch Rotational Molding process","year":2024,"lang":"en","type":"article","venue":"IFAC-PapersOnLine","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"McMaster University","funders":"","keywords":"Artificial neural network; Process (computing); Artificial intelligence; Model predictive control; Controller (irrigation); Computer science; Computer vision; Control engineering; Control theory (sociology); Engineering; Biology; Control (management)","score_opus":0.017862247432208645,"score_gpt":0.26148260872299156,"score_spread":0.2436203612907829,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4402309762","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.08678788,0.00039042524,0.9045638,0.000278409,0.00008224074,0.00007244187,0.00008813892,0.0008813451,0.006855294],"genre_scores_gemma":[0.9672606,0.00011632512,0.02972509,0.000040048704,0.000012381463,0.00009749044,0.000059619262,0.000017845894,0.0026706927],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99988174,0.000018510382,0.000006755894,0.00003869332,0.00003907095,0.000015147119],"domain_scores_gemma":[0.999811,0.00007994879,0.00003552043,0.000013328992,0.000053461383,0.000006669789],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003257127,0.0005731581,0.0003698741,0.0002052698,0.0003096375,0.00066660414,0.00062408205,0.0006010701,0.0013712152],"category_scores_gemma":[0.0006034333,0.00026629376,0.0003913797,0.00018999926,0.00037729248,0.0004321027,0.0003249581,0.0008052749,0.0001880074],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004608513,0.000022629456,0.0002814441,0.00003373455,0.000014287677,0.000028636667,0.000026651405,0.9770181,0.0040500457,0.0010464349,0.00020500601,0.017226957],"study_design_scores_gemma":[0.0000013448613,0.000010439271,0.000050180282,0.0000013166601,0.0000018824401,0.0000013494117,0.0000010487653,0.99925715,0.00048426646,0.0001277031,0.00006195753,0.0000013270741],"about_ca_topic_score_codex":0.015048056,"about_ca_topic_score_gemma":0.011814507,"teacher_disagreement_score":0.015048056,"about_ca_system_score_codex":0.00068628095,"about_ca_system_score_gemma":0.0006541849,"threshold_uncertainty_score":0.029920936},"labels":[],"label_agreement":null},{"id":"W4402452668","doi":"10.11159/mvml24.120","title":"Integrating Canny Filter and Convolutional Neural Networks for Quality Defect Detection in Injection Molding Process","year":2024,"lang":"en","type":"article","venue":"Proceedings of the World Congress on Electrical Engineering and Computer Systems and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"Centre National pour la Recherche Scientifique et Technique","keywords":"Convolutional neural network; Computer science; Artificial intelligence; Process (computing); Filter (signal processing); Computer vision; Molding (decorative); Canny edge detector; Artificial neural network; Pattern recognition (psychology); Materials science; Image processing; Edge detection; Image (mathematics); Composite material","score_opus":0.011476553293656263,"score_gpt":0.2292866163764096,"score_spread":0.21781006308275333,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4402452668","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.37626323,0.0013730964,0.6151662,0.0002895287,0.00015852327,0.00007027361,0.00016320804,0.0030084297,0.0035075415],"genre_scores_gemma":[0.86064017,0.00048032132,0.13464782,0.00006701476,0.000033138345,0.000024225557,0.00016098435,0.00008834003,0.0038579837],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99976,0.00002363328,0.000010061409,0.00005674002,0.000114462884,0.00003520166],"domain_scores_gemma":[0.999548,0.00010066517,0.000050755876,0.00003274059,0.0002494573,0.000018275095],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005563943,0.0005526485,0.0004120835,0.0010006598,0.00020823006,0.00049435155,0.00048192203,0.00063721463,0.0006882498],"category_scores_gemma":[0.000798346,0.0002823903,0.00044399843,0.00045697557,0.0001718435,0.0007342219,0.00028907182,0.00037899252,0.00021296125],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0006402308,0.0003206163,0.0107403975,0.00021668551,0.00011276317,0.0001581744,0.00008190367,0.09351746,0.21235679,0.0014642817,0.0022602177,0.67813045],"study_design_scores_gemma":[0.0000068647764,0.000098465374,0.004003668,0.000007442149,0.00004837029,0.000038961847,0.000009703134,0.93263936,0.062299334,0.00025352873,0.00058240164,0.000011889085],"about_ca_topic_score_codex":0.008795473,"about_ca_topic_score_gemma":0.012293048,"teacher_disagreement_score":0.008795473,"about_ca_system_score_codex":0.0006709386,"about_ca_system_score_gemma":0.0007494347,"threshold_uncertainty_score":0.01748854},"labels":[],"label_agreement":null},{"id":"W4402966453","doi":"10.1016/j.porgcoat.2024.108815","title":"Insights into powder coating excellence: Unveiling the effects of particle-size distribution","year":2024,"lang":"en","type":"article","venue":"Progress in Organic Coatings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Excellence; Particle-size distribution; Powder coating; Coating; Particle size; Distribution (mathematics); Metallurgy; Particle (ecology); Chemical engineering; Composite material; Mathematics","score_opus":0.005417399537517466,"score_gpt":0.220900797443863,"score_spread":0.21548339790634555,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4402966453","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8335905,0.013302735,0.13470317,0.0016858793,0.00021732287,0.000057438716,0.0002177386,0.00049209065,0.015732983],"genre_scores_gemma":[0.9797742,0.0047565415,0.013637126,0.00015486828,0.0000705233,0.000011796276,0.000059988983,0.00011496107,0.0014199271],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996213,0.00004463059,0.000020618923,0.00010230258,0.0001550513,0.00005611196],"domain_scores_gemma":[0.99942446,0.00027855267,0.00011369762,0.00007361677,0.000081694256,0.000027991973],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007254342,0.00048272088,0.00044116628,0.00029459514,0.00025053503,0.0011113029,0.00056401204,0.0004584418,0.0011409769],"category_scores_gemma":[0.0014123827,0.000292008,0.00025258618,0.0002530509,0.00064690056,0.0025635017,0.0005787875,0.0011170448,0.00032568572],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008020726,0.00008368432,0.0009257963,0.00022352536,0.000016718946,0.000082093895,0.00011418933,0.002072348,0.9640242,0.0071469923,0.0003011588,0.024929116],"study_design_scores_gemma":[0.000017015711,0.00020650239,0.003447033,0.000014165028,0.00003336386,0.00014345505,0.000098981676,0.030248282,0.9574623,0.0029182504,0.0053871917,0.000023533941],"about_ca_topic_score_codex":0.00073018,"about_ca_topic_score_gemma":0.000886673,"teacher_disagreement_score":0.0011409769,"about_ca_system_score_codex":0.000574382,"about_ca_system_score_gemma":0.00040629003,"threshold_uncertainty_score":0.0041674376},"labels":[],"label_agreement":null},{"id":"W4403131257","doi":"10.1007/s12206-024-0927-x","title":"Analysis and experimental study of mixing performance of screw structure for two-component composite coating based on EDEM-CFD","year":2024,"lang":"en","type":"article","venue":"Journal of Mechanical Science and Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Memorial University of Newfoundland","funders":"","keywords":"Composite number; Coating; Computational fluid dynamics; Mixing (physics); Component (thermodynamics); Materials science; Composite material; Structural engineering; Mechanical engineering; Engineering; Physics; Thermodynamics; Aerospace engineering","score_opus":0.010373079824215335,"score_gpt":0.2593659796062931,"score_spread":0.24899289978207775,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4403131257","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9879865,0.00024742246,0.00938706,0.000029552346,0.000030967993,0.000018920824,0.00017152369,0.00012809328,0.0020000322],"genre_scores_gemma":[0.9957177,0.00007490496,0.0033127812,0.0000052918044,0.0000033901997,0.000008334551,0.000072150964,0.000014783881,0.0007906038],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99976486,0.000021473472,0.000012606183,0.000046540663,0.00012475255,0.00002970288],"domain_scores_gemma":[0.99960834,0.00016128618,0.000042154465,0.000031355143,0.00014200713,0.000014864779],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00043006323,0.00033012943,0.00034896686,0.0003871586,0.00035949648,0.00036087394,0.00043902232,0.0004607348,0.0016402963],"category_scores_gemma":[0.0005934541,0.0001985712,0.00040337004,0.00034723358,0.00031548442,0.00043057598,0.00018445327,0.00028014337,0.00019458572],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0007273083,0.00017795601,0.0046373243,0.00028581143,0.000022857053,0.00016737153,0.00023763871,0.0119944895,0.9572838,0.0005780291,0.00038964048,0.02349784],"study_design_scores_gemma":[0.000036012872,0.00059737987,0.016256908,0.000012381008,0.00005505917,0.00008209207,0.00013590933,0.10699515,0.87432927,0.00008782401,0.001373631,0.000038421807],"about_ca_topic_score_codex":0.0013374845,"about_ca_topic_score_gemma":0.0014961825,"teacher_disagreement_score":0.0016402963,"about_ca_system_score_codex":0.00034728457,"about_ca_system_score_gemma":0.00020358452,"threshold_uncertainty_score":0.005487323},"labels":[],"label_agreement":null},{"id":"W4403805961","doi":"10.1111/exsy.13769","title":"General Industrial Process Optimization Method to Leverage Machine Learning Applied to Injection Moulding","year":2024,"lang":"en","type":"article","venue":"Expert Systems","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick; Ontario Tech University","funders":"Natural Sciences and Engineering Research Council of Canada; Mitacs; New Brunswick Innovation Foundation","keywords":"Computer science; Leverage (statistics); Injection moulding; Process (computing); Manufacturing engineering; Industrial engineering; Artificial intelligence; Materials science; Composite material","score_opus":0.032825277755391895,"score_gpt":0.28371511367915514,"score_spread":0.25088983592376324,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4403805961","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.013128591,0.000107638094,0.98440266,0.000064698965,0.000011313207,0.000047124162,0.000019301908,0.00030392542,0.0019147939],"genre_scores_gemma":[0.58468544,0.0001281709,0.4117846,0.00006195712,0.00002587725,0.00015794921,0.000099727884,0.00011828225,0.0029380503],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99971086,0.00008324378,0.000018009272,0.000066479406,0.000093764946,0.000027656924],"domain_scores_gemma":[0.9995753,0.00023620453,0.000046076082,0.000028292246,0.000101154874,0.000012953555],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010250708,0.0006754211,0.000736076,0.0007679346,0.0003237447,0.0006228093,0.000796185,0.0008491125,0.0018219652],"category_scores_gemma":[0.0015223462,0.00038380167,0.0007895973,0.00049643964,0.0004424658,0.00045051912,0.0006628758,0.0007572251,0.00026317258],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000027136333,0.000033094733,0.0004953558,0.00005369772,0.000017885615,0.00003769498,0.000021541688,0.94757503,0.0032372526,0.0025334232,0.00019995219,0.045767978],"study_design_scores_gemma":[0.00000127752,0.000007649988,0.000046821566,0.0000015479766,0.0000014451314,0.0000029371008,0.0000014364008,0.99895453,0.00041279438,0.00041408904,0.00015442522,0.0000010847797],"about_ca_topic_score_codex":0.0039463346,"about_ca_topic_score_gemma":0.003814376,"teacher_disagreement_score":0.0039463346,"about_ca_system_score_codex":0.00064364175,"about_ca_system_score_gemma":0.0009933965,"threshold_uncertainty_score":0.007846713},"labels":[],"label_agreement":null},{"id":"W4407640866","doi":"10.4071/001c.129514","title":"The Quarter Factor Prediction of Mold Void Mechanism between Structure Ratio and Molding Gate","year":2025,"lang":"en","type":"article","venue":"IMAPSource Proceedings","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Void (composites); Quarter (Canadian coin); Molding (decorative); Mold; Materials science; Mechanism (biology); Composite material; Physics; History; Archaeology","score_opus":0.006607439586433087,"score_gpt":0.19161415600510381,"score_spread":0.18500671641867072,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4407640866","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8735216,0.00017099213,0.12384224,0.00004933443,0.00002198739,0.000024930854,0.00009234412,0.0005377,0.0017388881],"genre_scores_gemma":[0.997191,0.000027890052,0.002329989,0.0000029860726,0.0000014854784,0.0000036525605,0.000024410589,0.0000201831,0.0003984792],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999101,0.000012758021,0.0000031560853,0.00002873491,0.000027291186,0.000017973756],"domain_scores_gemma":[0.9994209,0.00038656057,0.000074171614,0.000037299134,0.00005962841,0.000021459084],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00027972757,0.0004499914,0.00018418473,0.0002620771,0.00012352868,0.00024101118,0.00022643956,0.00036233384,0.0010481387],"category_scores_gemma":[0.001446332,0.00022831872,0.00039052716,0.00011892284,0.00015947872,0.0003385886,0.00012768026,0.00024183732,0.00018133958],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00021830735,0.000074610936,0.031169545,0.000068548514,0.000034500386,0.0002496977,0.00008396761,0.8442781,0.08638335,0.0010780045,0.00030776003,0.03605361],"study_design_scores_gemma":[0.0000030961837,0.000041795614,0.00366684,0.0000022470354,0.000008634872,0.000019833244,0.0000064234127,0.98391706,0.01211466,0.00008614601,0.00012843273,0.0000047983312],"about_ca_topic_score_codex":0.003489211,"about_ca_topic_score_gemma":0.0024397168,"teacher_disagreement_score":0.003489211,"about_ca_system_score_codex":0.00023042805,"about_ca_system_score_gemma":0.00036509213,"threshold_uncertainty_score":0.006937802},"labels":[],"label_agreement":null},{"id":"W4407824156","doi":"10.1002/9781394356294.ch14","title":"Downhole Pressure and Temperature Observations at a CO <sub>2</sub> Injector Under Differing Injection Conditions","year":2025,"lang":"en","type":"other","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"University of Alberta","funders":"","keywords":"Injector; Materials science; Environmental science; Mechanics; Thermodynamics; Physics","score_opus":0.010893439986916937,"score_gpt":0.2099014506863727,"score_spread":0.19900801069945576,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4407824156","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98607165,0.000027975535,0.0033031697,0.00013140944,0.000045156063,0.000044075583,0.002240892,0.00063329237,0.007502463],"genre_scores_gemma":[0.9973242,0.000016239432,0.001153838,0.000021205315,0.0000053020717,0.000015519585,0.0006737053,0.000022195783,0.0007676974],"study_design_codex":"bench_or_experimental","study_design_gemma":"observational","domain_scores_codex":[0.99970967,0.000013093515,0.00000885933,0.000049224527,0.00014573458,0.00007344198],"domain_scores_gemma":[0.99966025,0.000040566138,0.00005882227,0.000032895037,0.00014866934,0.000058689016],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021423044,0.00026405274,0.00015524075,0.0005347403,0.0005083515,0.00041444725,0.0005258795,0.0005971222,0.0017464992],"category_scores_gemma":[0.00052894856,0.00018309108,0.0001873376,0.00055090874,0.00045584593,0.0005316452,0.00047951704,0.00063307653,0.0003295279],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0019219662,0.00088150206,0.2562448,0.00013421569,0.00007513117,0.001192513,0.0016287926,0.0059376205,0.6619797,0.0012516048,0.007817071,0.06093503],"study_design_scores_gemma":[0.000116206356,0.00076601753,0.7634276,0.000015664536,0.00006652531,0.00040389894,0.0008390118,0.0391798,0.18644108,0.00048204843,0.008152694,0.000109433124],"about_ca_topic_score_codex":0.014744966,"about_ca_topic_score_gemma":0.027663486,"teacher_disagreement_score":0.014744966,"about_ca_system_score_codex":0.0004734507,"about_ca_system_score_gemma":0.0006131367,"threshold_uncertainty_score":0.029318273},"labels":[],"label_agreement":null},{"id":"W4409344354","doi":"10.32497/jrm.v19i2.5669","title":"Optimasi Parameter Plastic Injection Molding pada Mold ID Card Holder Landscape untuk Menurunkan Cacat Sink Mark","year":2024,"lang":"id","type":"article","venue":"Jurnal Rekayasa Mesin","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Encana (Canada)","funders":"","keywords":"Mold; Sink (geography); Molding (decorative); Physics; Computer science; Materials science; Composite material; Geography; Cartography","score_opus":0.016490872728997227,"score_gpt":0.23512442792021665,"score_spread":0.2186335551912194,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4409344354","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.79063696,0.0070599015,0.13062069,0.00052771915,0.000567331,0.00044300721,0.0013763168,0.002276741,0.06649132],"genre_scores_gemma":[0.938254,0.0015989387,0.04422508,0.00006979629,0.00001837326,0.00015179568,0.00049832236,0.00028511108,0.014898619],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9996269,0.000037583868,0.000022766393,0.00007518497,0.00018376551,0.000053799246],"domain_scores_gemma":[0.9996431,0.00009198135,0.00007514633,0.000037476813,0.00012194268,0.000030401328],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000536719,0.00080470106,0.00047934795,0.000670594,0.0003135121,0.0013472845,0.0004985606,0.00056467444,0.008361561],"category_scores_gemma":[0.000669472,0.00035693817,0.0005948373,0.0004623591,0.00022889221,0.00061786425,0.0003386459,0.00055505516,0.0016516644],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0014221042,0.0007801224,0.006677704,0.0015393633,0.00007972835,0.00036651423,0.00023413297,0.06525554,0.7633207,0.0025503333,0.0044592745,0.15331458],"study_design_scores_gemma":[0.000092918715,0.0030994655,0.016472002,0.00012495735,0.00025020246,0.00031610733,0.0003971678,0.110291764,0.8338369,0.0010080514,0.033951923,0.0001585046],"about_ca_topic_score_codex":0.0010374666,"about_ca_topic_score_gemma":0.0025972384,"teacher_disagreement_score":0.008361561,"about_ca_system_score_codex":0.00041169694,"about_ca_system_score_gemma":0.00049521413,"threshold_uncertainty_score":0.027972162},"labels":[],"label_agreement":null},{"id":"W4409360158","doi":"10.1139/tcsme-2024-0055","title":"Study on residual stress effects to cracking in the injection molding product—a case study of CPVC male threaded adapter fittings with copper insert","year":2025,"lang":"en","type":"article","venue":"Transactions of the Canadian Society for Mechanical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"Đại học Đà Nẵng","keywords":"Residual stress; Materials science; Molding (decorative); Cracking; Insert (composites); Adapter (computing); Copper; Composite material; Engineering; Metallurgy","score_opus":0.01622018378642155,"score_gpt":0.23169348898114547,"score_spread":0.21547330519472394,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4409360158","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9966763,0.00040283895,0.0021022868,0.000018271629,0.000009599134,0.000040386272,0.000041478204,0.000031240368,0.00067755807],"genre_scores_gemma":[0.99647576,0.00016225626,0.0023568228,0.000007812909,0.0000046330492,0.000010263861,0.0000351265,0.000012779079,0.000934571],"study_design_codex":"bench_or_experimental","study_design_gemma":"observational","domain_scores_codex":[0.9992787,0.00007590345,0.000050814742,0.00013740841,0.00038313313,0.00007397438],"domain_scores_gemma":[0.9983493,0.0005243897,0.00038316977,0.0001924014,0.00048543513,0.000065271895],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006388863,0.00038221554,0.0004693515,0.0006657207,0.0004600085,0.0005713824,0.0005436984,0.00093413494,0.0010507201],"category_scores_gemma":[0.0012328041,0.00024421557,0.00059493876,0.00042629786,0.00052023184,0.00043223985,0.0002975627,0.00037140382,0.00021272014],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0006710395,0.0005289341,0.045169182,0.00099776,0.000056685494,0.009985153,0.0027421252,0.012276415,0.8572646,0.00043361945,0.0004410924,0.06943337],"study_design_scores_gemma":[0.000035991783,0.008188463,0.15552253,0.00011943175,0.0002407074,0.009526829,0.0036894183,0.042637885,0.77240187,0.0002097208,0.007296338,0.00013083067],"about_ca_topic_score_codex":0.0014770342,"about_ca_topic_score_gemma":0.0027697708,"teacher_disagreement_score":0.0014770342,"about_ca_system_score_codex":0.00036578803,"about_ca_system_score_gemma":0.00022528635,"threshold_uncertainty_score":0.003515005},"labels":[],"label_agreement":null},{"id":"W4409480627","doi":"10.3390/polym17081067","title":"A Hybrid Artificial Neural Network Approach for Modeling the Behavior of Polyethylene Terephthalate (PET) Under Conditions Applicable to Stretch Blow Molding","year":2025,"lang":"en","type":"article","venue":"Polymers","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"China Scholarship Council; Queen's University; Queen's University Belfast","keywords":"Artificial neural network; Materials science; Molding (decorative); Polyethylene terephthalate; Finite element method; Deformation (meteorology); Nonlinear system; Viscoelasticity; Blow molding; Process (computing); Computer science; Stress (linguistics); Mechanical engineering; Digital image correlation; Constitutive equation; Range (aeronautics); Forming processes; Biological system; Composite material; Structural engineering; Artificial intelligence; Mold; Engineering","score_opus":0.02654963980379125,"score_gpt":0.25985622792436963,"score_spread":0.2333065881205784,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4409480627","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.13691857,0.00083036063,0.84972596,0.00021756276,0.000072209776,0.00008629333,0.00032019452,0.0006163788,0.011212398],"genre_scores_gemma":[0.92783487,0.0005533345,0.061737794,0.000077973855,0.000023210892,0.00033545814,0.00034725745,0.000044928165,0.009045032],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9999043,0.00002389379,0.000006467522,0.000024330688,0.000029525609,0.000011519195],"domain_scores_gemma":[0.99986637,0.00006478941,0.000016657443,0.0000072975163,0.00003989638,0.0000048676516],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002611333,0.00052386755,0.00033978914,0.00027213697,0.00019243364,0.000412769,0.00057480205,0.0009517287,0.0010967787],"category_scores_gemma":[0.0003967221,0.0002876535,0.0004883782,0.00026170458,0.00022509054,0.00040156062,0.00029711312,0.00048515445,0.00018505027],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001299184,0.000013013354,0.00024314686,0.000022386934,0.000009234373,0.000023578368,0.0000087790895,0.9916515,0.001823378,0.0003309002,0.00006887492,0.0057922164],"study_design_scores_gemma":[6.501604e-7,0.000005830894,0.00006699772,0.0000018388222,0.0000013823751,0.0000023833898,0.0000011633729,0.99947506,0.00025877001,0.000084445135,0.00010019647,0.0000012454035],"about_ca_topic_score_codex":0.006065695,"about_ca_topic_score_gemma":0.0058170496,"teacher_disagreement_score":0.006065695,"about_ca_system_score_codex":0.00039825635,"about_ca_system_score_gemma":0.0004637113,"threshold_uncertainty_score":0.012060761},"labels":[],"label_agreement":null},{"id":"W4410088885","doi":"10.1117/12.3051162","title":"Visco-hyperelastic computational model for injection-molded thermoplastic polyurethane","year":2025,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"York University","funders":"","keywords":"Hyperelastic material; Thermoplastic polyurethane; Materials science; Polyurethane; Composite material; Thermoplastic; Thermoforming; Finite element method; Structural engineering; Engineering; Elastomer","score_opus":0.011616773357957461,"score_gpt":0.23152414787390938,"score_spread":0.2199073745159519,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4410088885","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0795548,0.0005006846,0.88167495,0.0004890405,0.00010208156,0.00016926613,0.0005434849,0.00051132817,0.036454424],"genre_scores_gemma":[0.8617575,0.0008148768,0.10246765,0.0002463967,0.000049976195,0.0008598162,0.0005738234,0.00023083825,0.03299906],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998779,0.000027079635,0.0000063912116,0.000022632596,0.000048215825,0.00001761966],"domain_scores_gemma":[0.9998809,0.00004659723,0.00002047278,0.000014776595,0.00002684109,0.000010369858],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00019400641,0.00050659775,0.00052264787,0.0004034271,0.00050592603,0.0007532204,0.0012464913,0.0013328285,0.00300398],"category_scores_gemma":[0.00046469207,0.0004449946,0.0006262727,0.00038096635,0.0006410858,0.0007059291,0.000613312,0.0007355963,0.000588378],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012036781,0.000021292946,0.00016882164,0.000017333608,0.0000050617787,0.000046889603,0.00002001646,0.98913306,0.0028625303,0.0058176415,0.00014842273,0.0017468643],"study_design_scores_gemma":[0.0000013265836,0.000003249403,0.000030076282,0.0000012060655,9.2229175e-7,0.0000059568274,0.0000018553499,0.99919933,0.0002197644,0.00026065233,0.00027384624,0.0000017442618],"about_ca_topic_score_codex":0.005222647,"about_ca_topic_score_gemma":0.0039341757,"teacher_disagreement_score":0.005222647,"about_ca_system_score_codex":0.00054418936,"about_ca_system_score_gemma":0.0009980458,"threshold_uncertainty_score":0.0103845},"labels":[],"label_agreement":null},{"id":"W4410861738","doi":"10.3390/powders4020015","title":"Classification of Metallic Powder Morphology Using Traditional and Automated Static Image Analysis: A Comparative Study","year":2025,"lang":"en","type":"article","venue":"Powders","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada","funders":"","keywords":"Morphology (biology); Materials science; Artificial intelligence; Computer vision; Computer science; Biology; Zoology","score_opus":0.0679088747895211,"score_gpt":0.31052027590112646,"score_spread":0.24261140111160537,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4410861738","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96443,0.00072263833,0.03046659,0.000041796564,0.000023777067,0.00013380105,0.0002973924,0.00038366226,0.0035003414],"genre_scores_gemma":[0.9585262,0.0006930123,0.038321823,0.000029201597,0.000026776634,0.000054777807,0.00062164303,0.00009341152,0.0016333013],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9991566,0.0001021373,0.00007226309,0.00016600541,0.0004396842,0.000063362204],"domain_scores_gemma":[0.9976446,0.00077886577,0.00024085377,0.00018061957,0.0010865323,0.00006853094],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0011314232,0.0003189061,0.00053955545,0.004167204,0.00031700035,0.0009862267,0.0004477175,0.00046105706,0.0011088527],"category_scores_gemma":[0.0022343965,0.00022649506,0.0005159594,0.0019407534,0.00046435065,0.0007048018,0.00033419032,0.00022128153,0.00040623583],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.002371483,0.00061456853,0.10524183,0.000702271,0.00022326288,0.00052981795,0.0010345738,0.0040803854,0.44996667,0.00057106675,0.00083728903,0.43382677],"study_design_scores_gemma":[0.00007006248,0.0024310483,0.62486976,0.00006262328,0.0004056528,0.002896965,0.0016992077,0.09291036,0.2687448,0.00046228606,0.0053166854,0.00013060316],"about_ca_topic_score_codex":0.002454655,"about_ca_topic_score_gemma":0.0032674926,"teacher_disagreement_score":0.004167204,"about_ca_system_score_codex":0.00042681347,"about_ca_system_score_gemma":0.00025984953,"threshold_uncertainty_score":0.0059836507},"labels":[],"label_agreement":null},{"id":"W4411377760","doi":"10.1088/1361-6439/ade160","title":"Considering microtexture geometry to improve micro-injection molding fidelity","year":2025,"lang":"en","type":"article","venue":"Journal of Micromechanics and Microengineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université Laval; École de Technologie Supérieure; McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Molding (decorative); Materials science; Composite material; Geometry; Engineering drawing; Mechanical engineering; Engineering; Mathematics","score_opus":0.004746551233559784,"score_gpt":0.20069331716157104,"score_spread":0.19594676592801125,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411377760","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.911316,0.000771962,0.08393619,0.000099527824,0.00005797003,0.00006758736,0.00012762622,0.00059533934,0.003027854],"genre_scores_gemma":[0.9843476,0.00017464896,0.015140281,0.00001410753,0.000006571387,0.000013984947,0.00003703828,0.00005587437,0.00020998108],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99974006,0.000024052566,0.000027221904,0.00006145577,0.00009684425,0.00005041194],"domain_scores_gemma":[0.9988242,0.00046379844,0.00037460454,0.00018284698,0.000119962824,0.00003458077],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00032463757,0.0004296815,0.00022461503,0.00023967521,0.00012768415,0.0005346195,0.0003418607,0.00027815264,0.0009594292],"category_scores_gemma":[0.0012217322,0.00022113431,0.00014406521,0.00019529855,0.00026289898,0.0004735193,0.00025472746,0.0003668028,0.00025451358],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000029136041,0.000028174492,0.0011204891,0.000070440095,0.0000050674175,0.000051640163,0.000027592105,0.008156071,0.98335475,0.00030462217,0.000056895045,0.006795103],"study_design_scores_gemma":[0.000004202932,0.00012353263,0.0029609099,0.0000075313083,0.000013362318,0.000047386908,0.000017979044,0.03236295,0.9636243,0.00007647184,0.0007513857,0.000009927277],"about_ca_topic_score_codex":0.0004342083,"about_ca_topic_score_gemma":0.0008830353,"teacher_disagreement_score":0.0009594292,"about_ca_system_score_codex":0.00026961433,"about_ca_system_score_gemma":0.00022380013,"threshold_uncertainty_score":0.003209591},"labels":[],"label_agreement":null},{"id":"W4412819935","doi":"10.3390/powders4030022","title":"Numerical Simulation and Experimental Study of the Thermal Wick-Debinding Used in Low-Pressure Powder Injection Molding","year":2025,"lang":"en","type":"article","venue":"Powders","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada; Mitacs","keywords":"Molding (decorative); Materials science; Thermal; Composite material; Computer simulation; Mechanics; Thermodynamics; Physics","score_opus":0.013423852150866425,"score_gpt":0.2600432807257772,"score_spread":0.2466194285749108,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4412819935","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9297987,0.00028920837,0.061497148,0.000138823,0.000056366418,0.000089742316,0.00046521594,0.00039795256,0.0072667645],"genre_scores_gemma":[0.9815238,0.00013263243,0.017333657,0.000010874816,0.0000030537608,0.000058931335,0.00013553593,0.000023938528,0.00077750284],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997831,0.000023072987,0.000013453953,0.000038863975,0.00010310513,0.000038375718],"domain_scores_gemma":[0.9993949,0.00034355276,0.0000745837,0.000068236826,0.00009632428,0.000022352655],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005157541,0.00030289544,0.0004701947,0.0002976518,0.00034032486,0.0004844834,0.00051601225,0.00069906126,0.0015075383],"category_scores_gemma":[0.0009908326,0.00016478034,0.00034721603,0.0004443863,0.00049806753,0.00036300372,0.00022585996,0.00049356074,0.00018742838],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002712656,0.0003583244,0.0038196289,0.00049687584,0.000018851197,0.00035585766,0.00028720117,0.7368229,0.23446944,0.005305536,0.0006169074,0.017177263],"study_design_scores_gemma":[0.000017572916,0.00013026215,0.0009277682,0.000009915659,0.0000078049725,0.000025532405,0.00003068424,0.9362902,0.061563782,0.00025621813,0.0007288278,0.000011384492],"about_ca_topic_score_codex":0.0020910506,"about_ca_topic_score_gemma":0.0015718342,"teacher_disagreement_score":0.0020910506,"about_ca_system_score_codex":0.00042562096,"about_ca_system_score_gemma":0.00048245915,"threshold_uncertainty_score":0.005043268},"labels":[],"label_agreement":null},{"id":"W4413984361","doi":"10.1016/j.ces.2025.122562","title":"Adaptive transfer learning with C-P-T sensor fusion for few-shot anomaly diagnosis in injection molding process","year":2025,"lang":"en","type":"article","venue":"Chemical Engineering Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"Research Grants Council, University Grants Committee; National Natural Science Foundation of China","keywords":"Process (computing); Anomaly (physics); Fusion; Molding (decorative); Transfer molding; Anomaly detection; Artificial intelligence; Materials science; Computer science; Physics; Composite material; Condensed matter physics","score_opus":0.012057304037472419,"score_gpt":0.22483397640571676,"score_spread":0.21277667236824432,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4413984361","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.14438418,0.00064394134,0.85156745,0.00029525757,0.00013902706,0.000043836222,0.00008991719,0.0010900066,0.0017463521],"genre_scores_gemma":[0.9475154,0.00019689128,0.05073232,0.0000812316,0.00003708768,0.000029589077,0.000093952855,0.000034965244,0.0012784876],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997124,0.00004187124,0.000013610984,0.000092245034,0.00009942091,0.00004049296],"domain_scores_gemma":[0.99968016,0.00011358764,0.000044667075,0.000034131972,0.0001094108,0.000018024064],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00045023725,0.0005921154,0.00065919483,0.0005270201,0.00032983214,0.0005207853,0.00076074235,0.0009422505,0.0006677738],"category_scores_gemma":[0.0011112054,0.00023125914,0.0004851001,0.000515847,0.00034531296,0.0011348644,0.0007854507,0.0008987787,0.00025232407],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000833147,0.00036615808,0.0053224503,0.00023267845,0.00012571382,0.0002729168,0.00015064383,0.33525354,0.10503619,0.0027419515,0.0024454403,0.5472191],"study_design_scores_gemma":[0.0000028573716,0.000038121292,0.00078589463,0.0000023874234,0.0000069670436,0.000029711753,0.00000799562,0.990221,0.008186441,0.000529953,0.00018191665,0.0000066825337],"about_ca_topic_score_codex":0.002495207,"about_ca_topic_score_gemma":0.0019612834,"teacher_disagreement_score":0.002495207,"about_ca_system_score_codex":0.00035548926,"about_ca_system_score_gemma":0.0005171948,"threshold_uncertainty_score":0.004961431},"labels":[],"label_agreement":null},{"id":"W4414306939","doi":"10.1016/j.ces.2025.122634","title":"Fast soft sensor model migration in injection molding processes: A reconstruction based deep learning framework","year":2025,"lang":"en","type":"article","venue":"Chemical Engineering Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"Research Grants Council, University Grants Committee; National Natural Science Foundation of China","keywords":"Soft sensor; Leverage (statistics); Process (computing); Deep learning; Transfer of learning; Production line; Production (economics); Molding (decorative); Process modeling","score_opus":0.00680796835114899,"score_gpt":0.20930887669893306,"score_spread":0.20250090834778406,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4414306939","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.039994273,0.00029568607,0.9575759,0.00018288058,0.000045994348,0.000022466063,0.000052074007,0.00084208546,0.0009886624],"genre_scores_gemma":[0.8469149,0.0002739446,0.14873211,0.00013154704,0.000036000154,0.00005706973,0.00018754178,0.00016253219,0.0035043282],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99986994,0.000021772688,0.0000069227617,0.000035312398,0.000040037663,0.000026041751],"domain_scores_gemma":[0.99965227,0.00013671236,0.000060457933,0.00005453737,0.00006696896,0.000029120234],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003981256,0.00070012605,0.0007283474,0.00034796976,0.000246393,0.00061769,0.0011599809,0.0011651109,0.001342218],"category_scores_gemma":[0.0009913604,0.00054320577,0.00056326936,0.00038699753,0.0004567622,0.0011085834,0.0009513212,0.0014995778,0.00034946093],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00014174219,0.00006936276,0.0006258953,0.000056845627,0.000027404307,0.000054888413,0.00003246803,0.9061273,0.010173531,0.002930748,0.0005510387,0.07920889],"study_design_scores_gemma":[8.6913957e-7,0.000004588143,0.000021536507,7.9761446e-7,8.4520985e-7,0.0000027727242,9.1087304e-7,0.99907243,0.0006168769,0.00023012687,0.00004718149,9.679628e-7],"about_ca_topic_score_codex":0.005563001,"about_ca_topic_score_gemma":0.0044901515,"teacher_disagreement_score":0.005563001,"about_ca_system_score_codex":0.00054498,"about_ca_system_score_gemma":0.0008396539,"threshold_uncertainty_score":0.011061251},"labels":[],"label_agreement":null},{"id":"W4416273535","doi":"10.1016/j.jeurceramsoc.2025.117998","title":"Supercritical CO₂ debinding: A promising method for binder removal in ceramic fabrication with potential applications in additive manufacturing – A review","year":2025,"lang":"en","type":"article","venue":"Journal of the European Ceramic Society","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Ceramic; Supercritical fluid; Fabrication; Thermal diffusivity; Work (physics); Process (computing); Supercritical fluid extraction","score_opus":0.011258449596620814,"score_gpt":0.2617899295723946,"score_spread":0.2505314799757738,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4416273535","genre_codex":"review","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"review","genre_consensus":"review","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.00405105,0.9892564,0.0038307894,0.00019540722,0.0002582957,0.000022469203,0.00003604852,0.000038271446,0.00231125],"genre_scores_gemma":[0.018107219,0.97630376,0.0026433365,0.00017743905,0.00025190355,0.00002535329,0.00007640014,0.00001580918,0.0023987913],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.99945384,0.00003397338,0.000047752914,0.000120724406,0.00028366546,0.000059944774],"domain_scores_gemma":[0.9994899,0.00022139127,0.00010189443,0.00002407406,0.00013907939,0.000023654084],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0011720201,0.0012008414,0.0013404397,0.0019963384,0.00041461203,0.0012680395,0.0011671687,0.0011343305,0.0014315649],"category_scores_gemma":[0.00066869723,0.0006160496,0.0006861051,0.0022501627,0.0009738726,0.0018757024,0.0007875564,0.0016647666,0.001259173],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00021667712,0.00042528435,0.00039787893,0.030820614,0.00025305655,0.00042855248,0.000202243,0.0022719654,0.16036443,0.0063694213,0.006178328,0.79207146],"study_design_scores_gemma":[0.000042326854,0.0009126724,0.0020084358,0.0014456786,0.00039718914,0.0017102573,0.00019495789,0.0019424413,0.25291333,0.002057528,0.73619413,0.00018112296],"about_ca_topic_score_codex":0.001195995,"about_ca_topic_score_gemma":0.0018896223,"teacher_disagreement_score":0.0019963384,"about_ca_system_score_codex":0.00064632494,"about_ca_system_score_gemma":0.0008826244,"threshold_uncertainty_score":0.006198287},"labels":[],"label_agreement":null},{"id":"W6924559104","doi":"10.15468/dl.xjvx4c","title":"Occurrence Download","year":2022,"lang":"en","type":"dataset","venue":"Global Biodiversity Information Facility","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Matching (statistics); Download; Alien; Range (aeronautics); State (computer science)","score_opus":0.013312171998356737,"score_gpt":0.19215263884935618,"score_spread":0.17884046685099944,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6924559104","genre_codex":"dataset","genre_gemma":"dataset","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"dataset","genre_consensus":"dataset","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0000559969,0.000032835447,0.000043720953,0.00003744644,0.00001449837,0.000006464456,0.9988205,0.00041631763,0.0005722354],"genre_scores_gemma":[0.00015402502,0.000034791785,0.00021055377,0.00004374614,0.0000035138892,0.000042054806,0.9990157,0.00010265467,0.0003929064],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99893683,0.00014264579,0.00013767942,0.00038653234,0.00022384906,0.00017240467],"domain_scores_gemma":[0.99777067,0.0006377095,0.00020745979,0.00057421834,0.0005637357,0.00024621072],"candidate_categories":["insufficient_payload"],"consensus_categories":[],"category_scores_codex":[0.0009666696,0.002408623,0.0016040441,0.0047376123,0.0010563557,0.0025665138,0.0029297515,0.002411091,0.1135769],"category_scores_gemma":[0.0056412425,0.00086735556,0.0014167887,0.0088047525,0.00049656956,0.0021535123,0.002485547,0.002037181,0.18795356],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000041198487,0.000018070159,0.0005036673,0.00063682994,0.00001767589,0.000018866198,0.000023695491,0.00019888488,0.00014645746,0.00037154567,0.99626946,0.0017535645],"study_design_scores_gemma":[0.000098732286,0.000014584848,0.00208388,0.00022919543,0.000018428256,0.00004241744,0.00008111395,0.00026457658,0.0002469469,0.000902262,0.9959943,0.000023485083],"about_ca_topic_score_codex":0.022806903,"about_ca_topic_score_gemma":0.037402567,"teacher_disagreement_score":0.8864231,"about_ca_system_score_codex":0.0015978705,"about_ca_system_score_gemma":0.0024285272,"threshold_uncertainty_score":0.37995255},"labels":[],"label_agreement":null},{"id":"W6931520105","doi":"10.5281/zenodo.7819379","title":"FIG. 1 in A study of the morphology and distribution of four Achnanthidium Kütz. species (Bacillariophyta), implications for ecological status assessment, and description of two new European species","year":2022,"lang":"en","type":"other","venue":"Zenodo (CERN European Organization for Nuclear Research)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Canadian Museum of Nature","funders":"","keywords":"Shetland; Distribution (mathematics); Morphology (biology); Nestedness; STREAMS","score_opus":0.06549969970601886,"score_gpt":0.2621180701029797,"score_spread":0.19661837039696084,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6931520105","genre_codex":"empirical","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.73848367,0.0050800075,0.011908698,0.00036582645,0.00032781714,0.0011128072,0.026418054,0.0005250111,0.21577808],"genre_scores_gemma":[0.8529314,0.0016998927,0.038957067,0.00037633016,0.00006213272,0.00079498976,0.020475494,0.00018094391,0.08452186],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.9998964,0.0000166886,0.000009894489,0.00004619354,0.000015789818,0.000015041509],"domain_scores_gemma":[0.9998883,0.000036041758,0.00002545799,0.00001756267,0.000017858682,0.000014638015],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001498667,0.0003378768,0.0001517901,0.0017134789,0.0009115878,0.00030626176,0.00043788276,0.00022808417,0.026043989],"category_scores_gemma":[0.00017670993,0.00014777547,0.00016936699,0.0014687869,0.0002452785,0.000458219,0.0005103272,0.00027925379,0.0059048156],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0011637307,0.00025812202,0.18372749,0.0014895461,0.00013121295,0.0020659345,0.0034953714,0.0016120955,0.1081168,0.004533798,0.051464934,0.64194095],"study_design_scores_gemma":[0.00004369324,0.0003442775,0.6351113,0.00011106946,0.00007410981,0.0035646746,0.0016352067,0.0006023316,0.005324338,0.0006649012,0.35249227,0.000031902942],"about_ca_topic_score_codex":0.0048903134,"about_ca_topic_score_gemma":0.017369404,"teacher_disagreement_score":0.026043989,"about_ca_system_score_codex":0.00034796642,"about_ca_system_score_gemma":0.00010910282,"threshold_uncertainty_score":0.08712578},"labels":[],"label_agreement":null},{"id":"W6979372690","doi":"","title":"PERRY: Policy Evaluation with Confidence Intervals using Auxiliary Data","year":2025,"lang":"en","type":"article","venue":"ArXiv.org","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"National Institutes of Health; National Human Genome Research Institute; Parker Institute for Cancer Immunotherapy; Canadian Institute for Advanced Research","keywords":"Task (project management); Confidence interval; Reinforcement learning; Value (mathematics); Ground truth; Construct (python library)","score_opus":0.14170254193722395,"score_gpt":0.3492679357619882,"score_spread":0.20756539382476427,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6979372690","genre_codex":"methods","genre_gemma":"methods","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"methods","genre_consensus":"methods","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.0111075,0.00048754914,0.9841644,0.00055904157,0.00009191423,0.000099053985,0.00037475888,0.0010363072,0.002079556],"genre_scores_gemma":[0.6586113,0.000550706,0.33435172,0.0006531653,0.0002076744,0.0004721914,0.0019251369,0.00074233307,0.0024857635],"study_design_codex":"simulation_or_modeling","study_design_gemma":"theoretical_or_conceptual","domain_scores_codex":[0.9903616,0.0050497088,0.00048638636,0.0017355013,0.001975109,0.0003916167],"domain_scores_gemma":[0.8885505,0.09389629,0.004016079,0.007837908,0.0046071326,0.0010920615],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.017627362,0.0020377191,0.0022694818,0.0021722773,0.00072840607,0.003456385,0.0034075072,0.0028210415,0.006242732],"category_scores_gemma":[0.12262419,0.001247997,0.0014629192,0.0015036287,0.0029719283,0.0059647434,0.004292029,0.00567508,0.000887906],"study_design_candidate":"theoretical_or_conceptual","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00039063115,0.00014633586,0.004510305,0.00026553505,0.00015867365,0.00011654614,0.00018674816,0.8252169,0.00077147613,0.07746467,0.003859828,0.08691231],"study_design_scores_gemma":[0.000030695337,0.000048596652,0.00025000973,0.00004817435,0.00001201689,0.000020791776,0.00001073449,0.96509236,0.0008846286,0.032663852,0.0009212387,0.000016910351],"about_ca_topic_score_codex":0.004744139,"about_ca_topic_score_gemma":0.0032886174,"teacher_disagreement_score":0.017627362,"about_ca_system_score_codex":0.0023270561,"about_ca_system_score_gemma":0.0029836034,"threshold_uncertainty_score":0.09322351},"labels":[],"label_agreement":null},{"id":"W6987112038","doi":"","title":"Search for dark matter candidates in the channel of Mono-H($\\\\to\\\\gamma\\\\gamma$) at the ATLAS experiment","year":2018,"lang":"en","type":"other","venue":"CERN Document Server (European Organization for Nuclear Research)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Nexen (Canada)","funders":"","keywords":"Atlas (anatomy); Large Hadron Collider; Dark matter; ATLAS experiment; Higgs boson; Atlas detector; Photon; Channel (broadcasting); Detector","score_opus":0.024202586528231575,"score_gpt":0.26034607429126905,"score_spread":0.23614348776303748,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6987112038","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98369193,0.0005172652,0.004731398,0.00011718561,0.000021792219,0.00003490939,0.0015878464,0.0003510662,0.008946585],"genre_scores_gemma":[0.9933202,0.00012880912,0.0022576565,0.000036373294,0.000014323075,0.000012000841,0.0015344364,0.000030755073,0.0026654527],"study_design_codex":"bench_or_experimental","study_design_gemma":"observational","domain_scores_codex":[0.9997545,0.000033658096,0.0000057959724,0.00006450456,0.000058062713,0.00008349596],"domain_scores_gemma":[0.9997029,0.00006885332,0.00008929099,0.000029115434,0.000035890003,0.000073977266],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00066239276,0.0006241728,0.0005262042,0.0017093534,0.00067109073,0.0012190562,0.00047410457,0.0006013821,0.0054568653],"category_scores_gemma":[0.00034856805,0.00026825487,0.00037575173,0.0011560395,0.00023286593,0.00035469883,0.00048456536,0.00018621174,0.0011828549],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.011988257,0.0010117855,0.33562753,0.00054041686,0.00041467234,0.0056180125,0.000497414,0.0042437855,0.5325251,0.028364252,0.008617371,0.07055143],"study_design_scores_gemma":[0.0006005686,0.0017070665,0.19852449,0.00007417465,0.0006142226,0.0024883715,0.0006557958,0.058276344,0.706082,0.007139595,0.023649454,0.00018792879],"about_ca_topic_score_codex":0.0011734494,"about_ca_topic_score_gemma":0.0018622075,"teacher_disagreement_score":0.0054568653,"about_ca_system_score_codex":0.00036980092,"about_ca_system_score_gemma":0.0004714945,"threshold_uncertainty_score":0.018255055},"labels":[],"label_agreement":null},{"id":"W6990116289","doi":"","title":"Computational and experimental evaluation of two models for the simulation of thermoplastics injection molding","year":2000,"lang":"en","type":"dissertation","venue":"eScholarship@McGill (McGill)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"McGill University","keywords":"Flow (mathematics); Molding (decorative); Nozzle; Polystyrene; Injection molding machine; Fountain; Work (physics); Computer simulation; Amorphous solid","score_opus":0.03866127234228364,"score_gpt":0.28768864850337,"score_spread":0.24902737616108636,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6990116289","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8365283,0.0011686011,0.1415752,0.00068236253,0.00036413426,0.00046944988,0.0012301569,0.0016839285,0.016297925],"genre_scores_gemma":[0.96263605,0.00036505162,0.03483769,0.00004885259,0.00001563246,0.00036878523,0.0004379834,0.000086428314,0.0012035646],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9994822,0.00013970312,0.00004200901,0.0000698963,0.00020133906,0.000064822976],"domain_scores_gemma":[0.99725264,0.0017352679,0.00018669476,0.00029839316,0.00043435412,0.00009265271],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00128324,0.0009545039,0.00081999414,0.0008584244,0.0005557492,0.0011487828,0.0015401066,0.0015735907,0.003024811],"category_scores_gemma":[0.004171581,0.00042761696,0.000587237,0.000676495,0.0006842434,0.00096757297,0.0005074266,0.00084595295,0.00031560686],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00021839567,0.00031889192,0.0014624672,0.00016407465,0.000016572185,0.0000683777,0.0000683504,0.9766888,0.007148991,0.0033124478,0.00032382575,0.010208776],"study_design_scores_gemma":[0.00001663301,0.00007779956,0.00024214797,0.0000066567804,0.000004338529,0.000006344752,0.0000120547575,0.99521035,0.004016065,0.00014382342,0.00025729486,0.0000064647716],"about_ca_topic_score_codex":0.004727223,"about_ca_topic_score_gemma":0.0035243663,"teacher_disagreement_score":0.004727223,"about_ca_system_score_codex":0.0014441024,"about_ca_system_score_gemma":0.00094195653,"threshold_uncertainty_score":0.010477722},"labels":[],"label_agreement":null},{"id":"W6991572080","doi":"","title":"Horinzontal plastic injection molding machine: Safety checklist","year":2011,"lang":"en","type":"article","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Institut de recherche Robert-Sauvé en santé et en sécurité du travail","funders":"","keywords":"Checklist; Molding (decorative); Materials testing","score_opus":0.0159915572347613,"score_gpt":0.18710291153639497,"score_spread":0.17111135430163366,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6991572080","genre_codex":"methods","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.2899857,0.0031891526,0.46615535,0.0073676934,0.0020827602,0.025345536,0.021756917,0.047552705,0.13656431],"genre_scores_gemma":[0.49762064,0.002709597,0.3569198,0.0032709534,0.00064536015,0.015854264,0.029110245,0.0029469873,0.0909221],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.99676174,0.0006463232,0.00046505083,0.00013234546,0.0018161571,0.00017834966],"domain_scores_gemma":[0.9867448,0.0030541786,0.0019648601,0.0012368344,0.0065895026,0.0004098048],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0035076027,0.0008500629,0.0004892859,0.0018213444,0.0008666599,0.00052852294,0.0012940395,0.0008608851,0.013266956],"category_scores_gemma":[0.009227701,0.00042355052,0.0002800072,0.0003842895,0.0003832823,0.0006677232,0.00092201104,0.0006588478,0.006938662],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0034018417,0.0016410651,0.024727104,0.0028313044,0.000059319325,0.0025226707,0.00096578273,0.0054742116,0.16906524,0.0034751785,0.28660163,0.4992346],"study_design_scores_gemma":[0.00063722586,0.0030124772,0.059002966,0.0010617434,0.00011014423,0.004262327,0.0005812366,0.010991204,0.14968608,0.001827381,0.76860386,0.0002233943],"about_ca_topic_score_codex":0.00066830445,"about_ca_topic_score_gemma":0.0018805107,"teacher_disagreement_score":0.013266956,"about_ca_system_score_codex":0.00055722083,"about_ca_system_score_gemma":0.0026646748,"threshold_uncertainty_score":0.044382393},"labels":[],"label_agreement":null},{"id":"W6992853437","doi":"","title":"Morphological and mechanical comparision of injection and compression moulding in-line compounding of direct long fibre thermoplastics","year":2010,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Compounding; Injection moulding; Sheet moulding compound; Extrusion; Glass fiber; Plastics extrusion; Compression (physics); Compression molding; Injection molding machine","score_opus":0.016978543104851727,"score_gpt":0.23672742495797802,"score_spread":0.2197488818531263,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6992853437","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99296427,0.00043660347,0.0028269128,0.000013349251,0.000017261333,0.00002904962,0.0002022477,0.00008354382,0.0034267749],"genre_scores_gemma":[0.99310124,0.00013589069,0.004070895,0.000011193385,0.0000054244874,0.00001703311,0.00018246667,0.0000309883,0.0024447995],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99986935,0.0000079899755,0.000007823108,0.000029018593,0.00006075929,0.000025019743],"domain_scores_gemma":[0.99971014,0.000066000335,0.00006669062,0.000041118656,0.00008535427,0.00003064954],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00011981398,0.0001777809,0.00009109432,0.0005139621,0.00013152149,0.00021004365,0.000107704036,0.00020278306,0.0017203318],"category_scores_gemma":[0.0003048114,0.00013900928,0.00017550845,0.00020613866,0.0002909004,0.00015684232,0.000106158644,0.00029952693,0.00020313624],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006146723,0.000014891266,0.000834788,0.000035463097,0.000002660993,0.000052625273,0.000047082787,0.0003398884,0.9928578,0.00016012827,0.000040729,0.0055525014],"study_design_scores_gemma":[0.0000045203997,0.00033305938,0.053485256,0.000010147706,0.000016124233,0.0003178678,0.00007221227,0.0017958075,0.9410823,0.000054038395,0.0028137795,0.000014929496],"about_ca_topic_score_codex":0.00073656574,"about_ca_topic_score_gemma":0.001506576,"teacher_disagreement_score":0.0017203318,"about_ca_system_score_codex":0.00019388011,"about_ca_system_score_gemma":0.00011806907,"threshold_uncertainty_score":0.0057551265},"labels":[],"label_agreement":null},{"id":"W6992920122","doi":"","title":"Morphological zones in micro injection molding of poly(oxymethylene)","year":2012,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Polyoxymethylene; Molding (decorative); Morphology (biology); Optical microscope; Compression molding; Transverse plane","score_opus":0.021743358561322666,"score_gpt":0.23003677417737375,"score_spread":0.20829341561605108,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6992920122","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98367554,0.00033284258,0.013164042,0.0000144435235,0.000012831263,0.00003254057,0.00007441504,0.00014646449,0.0025469682],"genre_scores_gemma":[0.9915092,0.0001639265,0.006777961,0.00001014942,0.0000030671358,0.00001788619,0.00007115127,0.00003168769,0.0014148831],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99992335,0.000005572461,0.000003898665,0.00002129995,0.00003159107,0.000014259812],"domain_scores_gemma":[0.9998425,0.000039610408,0.00006317929,0.000016215914,0.00001739085,0.000021004935],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000113704504,0.00020194778,0.00007276422,0.00019111378,0.000097603275,0.00027617448,0.00014714652,0.00012109534,0.0005461544],"category_scores_gemma":[0.00014717248,0.00017410502,0.0001246977,0.00013168954,0.00020575966,0.00018169248,0.00012991247,0.00028674962,0.0001332837],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000013254894,0.0000056098156,0.00009431789,0.000008025665,4.8266077e-7,0.000017666425,0.000013853253,0.00009871355,0.99883276,0.000081340615,0.0000049492246,0.0008290897],"study_design_scores_gemma":[0.0000031656964,0.000060893002,0.0022243476,0.0000020429084,0.000002362373,0.00004509795,0.0000060716393,0.00059539854,0.9966012,0.000018392802,0.00043897747,0.0000018764898],"about_ca_topic_score_codex":0.00028105243,"about_ca_topic_score_gemma":0.000594822,"teacher_disagreement_score":0.0005461544,"about_ca_system_score_codex":0.00015143881,"about_ca_system_score_gemma":0.00012924931,"threshold_uncertainty_score":0.0018270612},"labels":[],"label_agreement":null},{"id":"W6993077633","doi":"","title":"Numerical simulation of shrinkage and warpage deformation of an intermittent-extrusion blow molded part: validation case study","year":2018,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Shrinkage; Blow molding; Molding (decorative); Extrusion; Thermoplastic; Deformation (meteorology); Mold; Computer simulation; Residual stress; Work (physics)","score_opus":0.02156860140164069,"score_gpt":0.2626383100990147,"score_spread":0.24106970869737404,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6993077633","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97938293,0.00016067244,0.013797003,0.00009843137,0.00002979756,0.000060132938,0.00041074993,0.0002019043,0.005858371],"genre_scores_gemma":[0.9920918,0.00006594237,0.006209887,0.000011796404,0.000003125146,0.00004423886,0.0001927463,0.000016497937,0.0013641383],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99984515,0.000028335071,0.000011325422,0.000023064453,0.000057957328,0.000034187262],"domain_scores_gemma":[0.999203,0.00047721702,0.00008507422,0.000067864865,0.000120375465,0.000046417637],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003288842,0.0005377834,0.00060164125,0.0004412794,0.00041532863,0.0006362874,0.0007355308,0.0016352758,0.0023702043],"category_scores_gemma":[0.0009348084,0.00025907846,0.00068896747,0.00041007396,0.0006485049,0.00027248356,0.00042130452,0.00045022822,0.00019085249],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0000989453,0.000073718635,0.0028582034,0.00008158789,0.000014791216,0.0003545539,0.000072793606,0.98669225,0.0064342553,0.00032900777,0.00016843606,0.0028214485],"study_design_scores_gemma":[0.000014740781,0.00009369744,0.0013574354,0.000009062377,0.0000059841504,0.00003324349,0.000048400318,0.9956755,0.0024521246,0.00006772093,0.00023607325,0.0000060659595],"about_ca_topic_score_codex":0.006979493,"about_ca_topic_score_gemma":0.005921246,"teacher_disagreement_score":0.006979493,"about_ca_system_score_codex":0.00036406924,"about_ca_system_score_gemma":0.0004821573,"threshold_uncertainty_score":0.013877749},"labels":[],"label_agreement":null},{"id":"W6995552849","doi":"","title":"Optimization of the Injection Molding Process Using Design Sensitivity Analysis","year":2005,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Sensitivity (control systems); Process (computing); Molding (decorative); Manufacturing process; Component (thermodynamics); Process variable","score_opus":0.023224543719259066,"score_gpt":0.23307884038203305,"score_spread":0.209854296662774,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6995552849","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.29170993,0.0005797753,0.6648895,0.00072880916,0.00022205588,0.0004637457,0.00024701445,0.0017078785,0.039451282],"genre_scores_gemma":[0.9359294,0.00015833492,0.057750113,0.000047569476,0.000018212691,0.00011338058,0.0000989976,0.00022306135,0.005660969],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999305,0.00023577793,0.000018953338,0.000066785775,0.00032515175,0.000048418897],"domain_scores_gemma":[0.9985637,0.00078898243,0.00015959829,0.00009613941,0.00036314863,0.00002835481],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0011104124,0.00066657393,0.00072768173,0.00060012896,0.0003581069,0.0007960401,0.00037156677,0.00054673746,0.005516003],"category_scores_gemma":[0.0039646756,0.0004063722,0.00051820936,0.00027511147,0.0002834866,0.0007732721,0.00039189958,0.00042264603,0.00076170824],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0003525662,0.000098986384,0.0011956325,0.00035535256,0.00005422077,0.00010853741,0.00004218025,0.8678433,0.049509566,0.0031653403,0.0016785163,0.075595856],"study_design_scores_gemma":[0.00002847546,0.00014462993,0.00082029676,0.00001547111,0.000026103455,0.000023554408,0.0000133339045,0.96666527,0.029569466,0.001099432,0.0015801992,0.000013813316],"about_ca_topic_score_codex":0.0009995211,"about_ca_topic_score_gemma":0.0013843924,"teacher_disagreement_score":0.005516003,"about_ca_system_score_codex":0.0005777032,"about_ca_system_score_gemma":0.0007857581,"threshold_uncertainty_score":0.018452823},"labels":[],"label_agreement":null},{"id":"W6997038441","doi":"","title":"Temperature Measurement Using Ultrasound During Injection Molding","year":2004,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Temperature measurement; Ultrasound; Thermography; Molding (decorative); Temperature control","score_opus":0.020082177885302283,"score_gpt":0.20509737611581758,"score_spread":0.1850151982305153,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6997038441","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9503206,0.0006776349,0.03208478,0.00023161613,0.00050902995,0.00027726317,0.00021927049,0.00082915655,0.014850735],"genre_scores_gemma":[0.9707646,0.000200656,0.0131198075,0.00008503264,0.00005123478,0.00008614943,0.0001767648,0.0002560203,0.015259783],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9992587,0.00007912962,0.00002946445,0.000109747496,0.00045066082,0.00007235971],"domain_scores_gemma":[0.99833256,0.00036970142,0.00014715316,0.00016682861,0.0008909792,0.00009276684],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004156564,0.00023874194,0.00033969842,0.00050489797,0.0004669573,0.00044196838,0.00032289146,0.00043509935,0.0059917984],"category_scores_gemma":[0.0017360217,0.000255921,0.00015080046,0.00028876445,0.00041250212,0.0005595573,0.00029104884,0.00055581494,0.001452174],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00020370734,0.000041080784,0.0013789845,0.00005486548,0.000004299303,0.000086846856,0.00015840962,0.00013436232,0.98404205,0.00013461075,0.00037081665,0.0133899],"study_design_scores_gemma":[0.000008270872,0.00017242953,0.00459972,0.000003705852,0.00000810929,0.000049650847,0.000045122455,0.0017301354,0.9909855,0.000022286233,0.0023667845,0.000008260719],"about_ca_topic_score_codex":0.0005791095,"about_ca_topic_score_gemma":0.0011820693,"teacher_disagreement_score":0.0059917984,"about_ca_system_score_codex":0.00027465282,"about_ca_system_score_gemma":0.0003572459,"threshold_uncertainty_score":0.020044506},"labels":[],"label_agreement":null},{"id":"W6998805221","doi":"","title":"Bank Of Canada Cuts Rates, What's Next.!","year":2024,"lang":"en","type":"other","venue":"Internet Archive (Internet Archive)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Officer; Government (linguistics); Grandparent; Recapitalization; Bad debt","score_opus":0.011535221256772381,"score_gpt":0.21056421475981255,"score_spread":0.19902899350304015,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W6998805221","genre_codex":"other","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":"other","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.00325727,0.0029292654,0.0005245319,0.13340561,0.0148022575,0.0001688378,0.013339464,0.001502453,0.83007026],"genre_scores_gemma":[0.0065770443,0.00068236486,0.00032781606,0.015808558,0.00031268035,0.000033679455,0.0013320096,0.00031979266,0.9746061],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99806494,0.000053134965,0.00004027012,0.00011133898,0.0011070651,0.00062329095],"domain_scores_gemma":[0.9975157,0.0001073803,0.00006601417,0.00009502161,0.0016572641,0.0005586589],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009966699,0.00068223104,0.00046925776,0.0010553091,0.0075105173,0.0074337255,0.00090463547,0.0047503863,0.19522],"category_scores_gemma":[0.004787393,0.0005075318,0.0005261362,0.0015539038,0.0011840543,0.0020391955,0.0010242527,0.0037202484,0.07774721],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":true,"about_ca_topic_consensus":true,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000010408151,0.0000068489867,0.00027912462,0.000008902766,0.0000011088989,0.000022412032,0.00003678401,0.000015819625,0.000052330055,0.0028591617,0.9902744,0.0064325957],"study_design_scores_gemma":[0.0000042558613,0.0000031574677,0.0013642869,0.000013806556,0.0000013558837,0.000007548929,0.00012105895,0.00002339342,0.00006439621,0.00020244539,0.9981857,0.000008675988],"about_ca_topic_score_codex":0.9134211,"about_ca_topic_score_gemma":0.9512127,"teacher_disagreement_score":0.19522,"about_ca_system_score_codex":0.017006189,"about_ca_system_score_gemma":0.032608375,"threshold_uncertainty_score":0.65307593},"labels":[],"label_agreement":null},{"id":"W7005528268","doi":"","title":"Real-Time Diagnosis of Micro Powder Injection Molding Using Ultrasound","year":2006,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Ultrasound; Molding (decorative); Ultrasonic sensor; Ultrasonic imaging","score_opus":0.011277252785416823,"score_gpt":0.21312177305277774,"score_spread":0.2018445202673609,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7005528268","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8488113,0.001869744,0.14378548,0.0002589371,0.00016392797,0.0001291097,0.000110543275,0.0008824619,0.0039885244],"genre_scores_gemma":[0.9649379,0.0003786985,0.031848434,0.000055591092,0.00003563276,0.00002807695,0.00005684089,0.000042104704,0.0026165408],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997098,0.000036096895,0.000010509664,0.000041908206,0.0001823111,0.000019381365],"domain_scores_gemma":[0.9993223,0.00032210676,0.00010917104,0.00004112748,0.00017583146,0.00002953199],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00030348016,0.00022041691,0.00024351456,0.000514154,0.000135128,0.00040791905,0.00025767455,0.0005170753,0.001166844],"category_scores_gemma":[0.0009083222,0.00020995995,0.00010538546,0.0001724597,0.00032229084,0.0004627954,0.00017888872,0.00027493786,0.00034986442],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00029356338,0.000028163826,0.0026109272,0.00008069244,0.0000060970847,0.00017727478,0.00007094864,0.0005992141,0.96150744,0.00023231725,0.00017759968,0.03421583],"study_design_scores_gemma":[0.000020747259,0.00023890505,0.008861628,0.000008956159,0.000021716189,0.00042415384,0.00006096208,0.031198949,0.9577778,0.000108503205,0.0012651125,0.000012550758],"about_ca_topic_score_codex":0.0004621291,"about_ca_topic_score_gemma":0.00067985844,"teacher_disagreement_score":0.001166844,"about_ca_system_score_codex":0.00020433519,"about_ca_system_score_gemma":0.0002271538,"threshold_uncertainty_score":0.0039035082},"labels":[],"label_agreement":null},{"id":"W7009371654","doi":"","title":"Effect of Processing Parameters on Microstructure and Tensile Properties of PLLA Using Micro-Injection Molding","year":2006,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Microstructure; Ultimate tensile strength; Molding (decorative); Deformation (meteorology); Tensile testing","score_opus":0.009816504925522863,"score_gpt":0.20336625916343204,"score_spread":0.19354975423790918,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7009371654","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99752694,0.00031194795,0.0009703689,0.00004643914,0.00002817305,0.000017460861,0.000059539936,0.000041456155,0.0009976386],"genre_scores_gemma":[0.9972531,0.00012477627,0.0009792732,0.000021137017,0.000009768993,0.000012459772,0.000071621624,0.000029275456,0.0014986087],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.999889,0.000015394422,0.00001106174,0.000029189838,0.00003052547,0.000024839665],"domain_scores_gemma":[0.99949443,0.00022542258,0.00010341663,0.000035110315,0.00009398831,0.000047639223],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00020114164,0.0001232504,0.00017487668,0.0001351066,0.00017597983,0.00025260568,0.00015686594,0.00020562416,0.0024976768],"category_scores_gemma":[0.0006674821,0.0001759862,0.00011624344,0.00014456597,0.00012354362,0.00038717408,0.00009136514,0.00021656141,0.00038502362],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00040841303,0.000030464222,0.00034727374,0.00003285441,0.0000033632484,0.000038151706,0.000023283646,0.00014784603,0.99629587,0.00002391538,0.00004757793,0.0026009886],"study_design_scores_gemma":[0.000011972727,0.00017465671,0.0021657688,0.00000139772,0.0000060453385,0.000020673233,0.000008467594,0.00051313196,0.9968587,0.000006841191,0.00022963819,0.000002620945],"about_ca_topic_score_codex":0.00035984692,"about_ca_topic_score_gemma":0.00088138774,"teacher_disagreement_score":0.0024976768,"about_ca_system_score_codex":0.00011373888,"about_ca_system_score_gemma":0.00012237187,"threshold_uncertainty_score":0.008355558},"labels":[],"label_agreement":null},{"id":"W7015477424","doi":"","title":"Three-dimensional numerical simulation of the gas/water assisted injection molding","year":2005,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Flow (mathematics); Computer simulation; Finite element method; Flow conditions; Transient flow; Channel (broadcasting); Molding (decorative); Tracking (education)","score_opus":0.01787300193070099,"score_gpt":0.22418249328551393,"score_spread":0.20630949135481294,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7015477424","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7158998,0.00022181313,0.2548028,0.00041080778,0.00013593955,0.0001994015,0.0006996071,0.0013153435,0.02631452],"genre_scores_gemma":[0.9347169,0.00013342775,0.0598635,0.00006607862,0.00000892932,0.00021678083,0.0002513021,0.00010538889,0.0046377424],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998833,0.000019852618,0.0000052058226,0.000012680303,0.00005429871,0.000024504638],"domain_scores_gemma":[0.99967325,0.00018053192,0.00003268604,0.000029691295,0.00005086851,0.000033010452],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00026035568,0.00030664363,0.00036476564,0.0002624937,0.00044939233,0.00054606225,0.00061232346,0.0008933115,0.002364227],"category_scores_gemma":[0.00081670616,0.00025191373,0.00036237563,0.0002837716,0.00074844545,0.00039667898,0.0003756722,0.0005162051,0.00025808712],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004959243,0.000043823427,0.0006708515,0.000032618307,0.0000070627534,0.00011529903,0.00008588438,0.9814332,0.011129747,0.0030577395,0.00023005431,0.0031441848],"study_design_scores_gemma":[0.0000074751006,0.000010176875,0.00011734951,0.000002006998,0.000001398179,0.000008869252,0.000007405684,0.99647504,0.002831151,0.00015868548,0.00037634713,0.0000040731243],"about_ca_topic_score_codex":0.005598721,"about_ca_topic_score_gemma":0.0031020935,"teacher_disagreement_score":0.005598721,"about_ca_system_score_codex":0.0005748492,"about_ca_system_score_gemma":0.0009464054,"threshold_uncertainty_score":0.0111323},"labels":[],"label_agreement":null},{"id":"W7018648278","doi":"","title":"3D Injection Molding Simulation of Semi-Solid Magnesium Alloys","year":2008,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Magnesium; Molding (decorative); Magnesium alloy; Deformation (meteorology); Welding","score_opus":0.019975311419053295,"score_gpt":0.22997157038039673,"score_spread":0.20999625896134344,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7018648278","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.89949805,0.00026287267,0.0419812,0.00040883923,0.00014771605,0.00013566088,0.0014697223,0.0012356171,0.05486027],"genre_scores_gemma":[0.9874751,0.00007114863,0.008580006,0.000034120134,0.00000911207,0.000041512973,0.00026017564,0.00015067421,0.0033782045],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998759,0.000023976336,0.0000057459906,0.000015537005,0.000053834563,0.000024950592],"domain_scores_gemma":[0.9994055,0.00036251423,0.000060684437,0.000038999642,0.000090873575,0.000041464096],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00023133193,0.00053330406,0.0006506841,0.00047583727,0.00046707844,0.0008124351,0.000940683,0.0015857425,0.00925797],"category_scores_gemma":[0.0010038796,0.0006026151,0.000667924,0.00039251204,0.0004866412,0.00043294998,0.0003530547,0.0004081301,0.0006478618],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00005667208,0.000027179949,0.00056703604,0.00003581723,0.000010545581,0.000109784305,0.00003228037,0.99462247,0.0018659575,0.00086153636,0.00023271235,0.0015780719],"study_design_scores_gemma":[0.0000141527435,0.000018412207,0.00019430937,0.0000033858691,0.0000032141497,0.0000099062945,0.000008470022,0.9984769,0.0008613369,0.00012189583,0.0002848524,0.0000032064409],"about_ca_topic_score_codex":0.01027907,"about_ca_topic_score_gemma":0.008613857,"teacher_disagreement_score":0.01027907,"about_ca_system_score_codex":0.0008846275,"about_ca_system_score_gemma":0.0009432849,"threshold_uncertainty_score":0.03097099},"labels":[],"label_agreement":null},{"id":"W7039121008","doi":"","title":"Les liens nocturnes, le lien social chez les travailleurs de nuit","year":2000,"lang":"fr","type":"other","venue":"Library and Archives Canada (Government of Canada)","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Lien; Context (archaeology); Identity (music); Relation (database)","score_opus":0.004801882911418944,"score_gpt":0.1398125156640775,"score_spread":0.13501063275265857,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7039121008","genre_codex":"empirical","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.635797,0.03413207,0.0014160811,0.034431156,0.0014003481,0.0001845424,0.0046061897,0.00030265484,0.28772992],"genre_scores_gemma":[0.5331837,0.016161995,0.0009430324,0.0011466906,0.00027729277,0.000115611016,0.0007925316,0.0001270761,0.44725198],"study_design_codex":"design_other","study_design_gemma":"not_applicable","domain_scores_codex":[0.99929273,0.00010111567,0.000029204692,0.00006424558,0.00029375684,0.00021898194],"domain_scores_gemma":[0.99799263,0.0003555963,0.00034562184,0.000044469616,0.00049431523,0.00076733244],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00077469304,0.00046755018,0.00028180398,0.0017471013,0.011201456,0.004390752,0.00084980053,0.0019009952,0.032492977],"category_scores_gemma":[0.003930847,0.0003555862,0.00024056075,0.0027842661,0.002902186,0.0019782146,0.0015284343,0.0022524227,0.003100466],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":true,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00059955934,0.0007207386,0.2289276,0.00069642527,0.000038608334,0.008602927,0.12743472,0.00081749086,0.0018210973,0.049105715,0.16143426,0.41980082],"study_design_scores_gemma":[0.00003260859,0.00026449547,0.2991999,0.00054666563,0.00002606628,0.0034617365,0.15701368,0.0003939111,0.0010247732,0.0030915944,0.5348521,0.000092517395],"about_ca_topic_score_codex":0.81964976,"about_ca_topic_score_gemma":0.91298217,"teacher_disagreement_score":0.81964976,"about_ca_system_score_codex":0.013275936,"about_ca_system_score_gemma":0.020469865,"threshold_uncertainty_score":0.36282468},"labels":[],"label_agreement":null},{"id":"W7043047923","doi":"","title":"Royal Bank of Canada Cuts Innergex Renewable Energy (OTCMKTS:INGXF) Price Target to $29.00","year":2021,"lang":"en","type":"other","venue":"","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Renewable energy; Energy (signal processing); Energy policy; Government (linguistics)","score_opus":0.0061117423269200525,"score_gpt":0.1731309154991538,"score_spread":0.16701917317223375,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7043047923","genre_codex":"other","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":"other","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.00077124283,0.0019232976,0.000896506,0.008781572,0.0031750847,0.00015538922,0.00989671,0.0015965458,0.9728036],"genre_scores_gemma":[0.00094346545,0.00043089667,0.00014080323,0.00038320653,0.000055688837,0.00001191201,0.0011183652,0.0002632995,0.9966523],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99786574,0.000045383156,0.00003706507,0.00017503768,0.0015243089,0.00035244657],"domain_scores_gemma":[0.99651587,0.00015056109,0.00008300893,0.00016000906,0.0021714454,0.00091912394],"candidate_categories":["insufficient_payload"],"consensus_categories":[],"category_scores_codex":[0.0010897964,0.0014616924,0.0010277843,0.0021094098,0.0034640129,0.0074012447,0.0012516893,0.004470372,0.5488809],"category_scores_gemma":[0.0033441607,0.0009150909,0.0008849566,0.0017075097,0.0011142243,0.0019426183,0.0016829737,0.003811699,0.46740827],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":true,"about_ca_topic_consensus":true,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004450081,0.000015577145,0.00007892829,0.000048271835,0.000002458793,0.00002733139,0.000012162446,0.000076100456,0.0002404324,0.0044050533,0.97595257,0.019096602],"study_design_scores_gemma":[0.0000069586577,0.000008273034,0.00044812102,0.00003439102,0.0000017982574,0.000016059505,0.000027059597,0.00006983971,0.0001288233,0.0003922343,0.9988588,0.000007802385],"about_ca_topic_score_codex":0.5914196,"about_ca_topic_score_gemma":0.70881605,"teacher_disagreement_score":0.5488809,"about_ca_system_score_codex":0.010119624,"about_ca_system_score_gemma":0.026679946,"threshold_uncertainty_score":0.82197326},"labels":[],"label_agreement":null},{"id":"W7071645890","doi":"","title":"Three-dimensional numerical modeling of segregation in powder injection molding","year":2009,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Molding (decorative); Sintering; Particle (ecology); Diffusion; Flow (mathematics); Computer simulation; Phase (matter)","score_opus":0.01754404662741778,"score_gpt":0.222655402397418,"score_spread":0.2051113557700002,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7071645890","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.48249826,0.0004351795,0.50046724,0.00040951627,0.00008182475,0.00011974458,0.0002527602,0.00087778823,0.014857651],"genre_scores_gemma":[0.93787897,0.0002098435,0.05888594,0.000049576727,0.000011318195,0.000105191015,0.00011247303,0.00007915104,0.0026675225],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9998547,0.000031382944,0.000008724358,0.000017000095,0.000066623026,0.000021630836],"domain_scores_gemma":[0.99967766,0.00015910351,0.000047776044,0.00002700642,0.000060920815,0.000027599124],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00032746128,0.00039139314,0.0004640447,0.00038955858,0.0004628698,0.00096525915,0.00058489066,0.0010992059,0.00097598997],"category_scores_gemma":[0.0010830072,0.00034009732,0.0004610067,0.0003319438,0.0008500654,0.00053656293,0.00041124685,0.00045057427,0.00021714738],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000038226914,0.00003607758,0.0007137407,0.000020185513,0.0000066784764,0.000080450816,0.000049248996,0.98392916,0.008159723,0.004522423,0.00010490143,0.0023392302],"study_design_scores_gemma":[0.0000043142327,0.0000044562053,0.00008012955,0.0000010587545,0.0000010741585,0.000006849789,0.000002693852,0.99884284,0.00074643525,0.00018125106,0.0001269729,0.0000018627817],"about_ca_topic_score_codex":0.007902639,"about_ca_topic_score_gemma":0.0029871685,"teacher_disagreement_score":0.007902639,"about_ca_system_score_codex":0.00084676984,"about_ca_system_score_gemma":0.0008470958,"threshold_uncertainty_score":0.015713334},"labels":[],"label_agreement":null},{"id":"W7132135207","doi":"","title":"Optimization through simulation: NRC software reduces design times, optimizes process","year":2022,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Software; Product (mathematics); Process (computing); Finite element method; General partnership; Molding (decorative); Research council","score_opus":0.02813129110383146,"score_gpt":0.2447969894560155,"score_spread":0.21666569835218402,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132135207","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.010851044,0.00028731395,0.86840487,0.00033724168,0.000212316,0.00024540015,0.0024428589,0.07501774,0.04220112],"genre_scores_gemma":[0.11502154,0.00067508174,0.8316761,0.0003692833,0.000075845295,0.0011919396,0.0056371773,0.02439572,0.020957256],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99884474,0.00021775924,0.00006578353,0.00014307105,0.0006457103,0.000082982944],"domain_scores_gemma":[0.9977736,0.0009651026,0.00015699603,0.00038084734,0.0006664875,0.000057036053],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0014372051,0.0015203478,0.00096390315,0.00096701866,0.0005318464,0.0013656716,0.0016735547,0.00086940057,0.029036611],"category_scores_gemma":[0.004686918,0.00089649117,0.0010664073,0.00087440066,0.00045582314,0.001095202,0.0008652754,0.0015350905,0.00790104],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0003182154,0.00032080925,0.0032669022,0.0009858197,0.00019017392,0.0001311091,0.00022499914,0.5156094,0.023183597,0.027631562,0.104843155,0.32329437],"study_design_scores_gemma":[0.00010391365,0.00006340512,0.00045117657,0.00006963298,0.000054530858,0.000054350185,0.000022504473,0.90375143,0.01295982,0.004063876,0.07836527,0.00004016921],"about_ca_topic_score_codex":0.008418899,"about_ca_topic_score_gemma":0.011806298,"teacher_disagreement_score":0.029036611,"about_ca_system_score_codex":0.0007472513,"about_ca_system_score_gemma":0.0032946921,"threshold_uncertainty_score":0.09713715},"labels":[],"label_agreement":null},{"id":"W7132307547","doi":"","title":"Development of a topology optimization framework for cooling channel design in die casting molds","year":2021,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Topology optimization; Development (topology); Computation; Channel (broadcasting); Work (physics); Topology (electrical circuits); Optimal design","score_opus":0.047859570309890014,"score_gpt":0.2584797387054955,"score_spread":0.2106201683956055,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132307547","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.002903268,0.000068975096,0.99505913,0.000033550794,0.000011108876,0.000032893706,0.000026582356,0.0001399421,0.0017245964],"genre_scores_gemma":[0.15469135,0.00034976454,0.84161127,0.000042603537,0.000033441047,0.0002516234,0.00014612649,0.0002613858,0.0026125123],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9997969,0.000050586215,0.0000074645277,0.000024249228,0.00010107161,0.000019651261],"domain_scores_gemma":[0.99984574,0.00007027765,0.0000125055385,0.000017189788,0.000041899035,0.0000123416585],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00081566477,0.00071042386,0.00073265936,0.00047783018,0.00037107614,0.0007878806,0.0009326386,0.00080248533,0.0017039648],"category_scores_gemma":[0.0008309081,0.00042562402,0.0007238315,0.0003135417,0.0006086749,0.0005740361,0.0007678381,0.0013203432,0.00040754513],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001193959,0.000026145646,0.00011073177,0.00007983898,0.0000098369865,0.000031188174,0.00002728926,0.9259967,0.0071858554,0.04178563,0.00047909652,0.024255676],"study_design_scores_gemma":[0.000005475924,0.000022810042,0.000034043664,0.000008561536,0.0000023541168,0.000012194952,0.0000056483696,0.9905455,0.0012677384,0.005905973,0.0021859834,0.000003684905],"about_ca_topic_score_codex":0.001761411,"about_ca_topic_score_gemma":0.0023357314,"teacher_disagreement_score":0.001761411,"about_ca_system_score_codex":0.00055687915,"about_ca_system_score_gemma":0.0014023681,"threshold_uncertainty_score":0.00570035},"labels":[],"label_agreement":null},{"id":"W7132381124","doi":"","title":"Powder injection moulding at Canada’s National Research Council","year":2008,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Research council; Injection moulding; National standard; Research centre; Key (lock)","score_opus":0.13657808407397184,"score_gpt":0.26454503763952736,"score_spread":0.1279669535655555,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132381124","genre_codex":"other","genre_gemma":"other","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"other","genre_consensus":"other","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.03670606,0.017172022,0.06805981,0.02192062,0.0036381017,0.001001892,0.017527658,0.008337508,0.82563627],"genre_scores_gemma":[0.112287864,0.00893066,0.044545952,0.001216676,0.00019132523,0.00015583345,0.007932014,0.00086978707,0.8238699],"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","domain_scores_codex":[0.99696404,0.000073614494,0.000045548182,0.00022191566,0.0024107012,0.00028424538],"domain_scores_gemma":[0.9948177,0.00019161787,0.000118248405,0.00024332516,0.0039847596,0.0006444122],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0019814416,0.0005888141,0.0007499655,0.0018434899,0.0030200118,0.002043352,0.00127433,0.00086371193,0.05463168],"category_scores_gemma":[0.0014232458,0.0004198548,0.00043701538,0.0014993259,0.00080137997,0.0007496407,0.00083863083,0.0017022451,0.0110925315],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","about_ca_topic_candidate":true,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0004779034,0.0004550876,0.002899694,0.0006837227,0.00003866205,0.0006004808,0.0006300545,0.0018632638,0.081918925,0.0616418,0.49482262,0.35396782],"study_design_scores_gemma":[0.000049513656,0.00015155571,0.0031468773,0.000079741636,0.000018134631,0.00013173882,0.00007990683,0.0021147795,0.023163583,0.00083233236,0.97020185,0.000029954888],"about_ca_topic_score_codex":0.5907049,"about_ca_topic_score_gemma":0.7816647,"teacher_disagreement_score":0.5907049,"about_ca_system_score_codex":0.01417643,"about_ca_system_score_gemma":0.039725125,"threshold_uncertainty_score":0.823411},"labels":[],"label_agreement":null},{"id":"W7132440392","doi":"","title":"Benefits of supercritical CO₂ debinding for titanium powder injection moulding?","year":2010,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":false,"ca_institutions":"","funders":"","keywords":"Supercritical fluid; Titanium; Environmentally friendly; Titanium alloy; Titanium dioxide; Titanium powder; Contamination","score_opus":0.01512304606167471,"score_gpt":0.23079524936428406,"score_spread":0.21567220330260933,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132440392","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96400845,0.005679556,0.021859003,0.00027582934,0.000060699298,0.00003732727,0.00011283745,0.00026848403,0.0076977015],"genre_scores_gemma":[0.988525,0.0013440271,0.008487212,0.000036234036,0.00001624793,0.0000071079153,0.000067676665,0.000028042516,0.0014885006],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9997751,0.00004146598,0.000014273794,0.00003363726,0.00010165122,0.00003388825],"domain_scores_gemma":[0.9997347,0.000098581324,0.00006758036,0.000034200373,0.00005363982,0.000011303314],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00035672518,0.0002764134,0.00019369202,0.00028525782,0.00016608676,0.00047009767,0.00019394112,0.0003403912,0.0015585843],"category_scores_gemma":[0.00049055804,0.00015784391,0.00020529659,0.0002681454,0.00029238465,0.00042755666,0.00017654084,0.00026554632,0.00039544565],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00019098495,0.000024794483,0.00035166738,0.000098317,0.000004986667,0.000039972037,0.000023488983,0.00028149592,0.9866399,0.00024093976,0.000042563166,0.012060834],"study_design_scores_gemma":[0.0000037464822,0.00018111915,0.0012279799,0.0000043291266,0.00001602901,0.00009971111,0.000020160582,0.00068792794,0.996197,0.00004756577,0.0015091071,0.0000052338337],"about_ca_topic_score_codex":0.0006192225,"about_ca_topic_score_gemma":0.001989544,"teacher_disagreement_score":0.0015585843,"about_ca_system_score_codex":0.00020728535,"about_ca_system_score_gemma":0.00021628139,"threshold_uncertainty_score":0.0052139163},"labels":[],"label_agreement":null},{"id":"W7132449632","doi":"","title":"Titanium and titanium alloy powder injection moulding: matching application requirements","year":2010,"lang":"en","type":"article","venue":"NPARC","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":false,"route_ca_venue":true,"route_about_ca":true,"ca_institutions":"","funders":"","keywords":"Aerospace; Titanium; Titanium alloy; Matching (statistics); Alloy; Powder metallurgy","score_opus":0.01085616473623854,"score_gpt":0.22616980998875588,"score_spread":0.21531364525251734,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132449632","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.47594047,0.015902042,0.41248542,0.0033465438,0.0005211359,0.00066334155,0.00043559418,0.0025432021,0.08816214],"genre_scores_gemma":[0.7324175,0.007465796,0.2403751,0.0005021616,0.0001465066,0.0001658648,0.0005297838,0.0005126329,0.017884608],"study_design_codex":"bench_or_experimental","study_design_gemma":"not_applicable","domain_scores_codex":[0.99820757,0.00009982759,0.00005949551,0.00014885592,0.0013047225,0.00017957315],"domain_scores_gemma":[0.9995328,0.00009672219,0.00006530623,0.000057625726,0.00020774335,0.00003985516],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001524189,0.00037581872,0.00035931834,0.0007045933,0.0005260184,0.001196432,0.0008474636,0.0010443626,0.001472777],"category_scores_gemma":[0.0014259204,0.00032742912,0.0003225146,0.00057753443,0.0003887572,0.0012324213,0.0005654077,0.0008359035,0.00095934694],"study_design_candidate":"not_applicable","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00017450636,0.00009247181,0.0009550927,0.00028546085,0.0000062187905,0.00017256479,0.00011114325,0.0026833322,0.87339246,0.006643113,0.0015979761,0.11388555],"study_design_scores_gemma":[0.0000411403,0.0007572062,0.005389509,0.000039453545,0.000031401574,0.0015557101,0.00019832482,0.018570423,0.89880306,0.0030254412,0.071542576,0.00004580324],"about_ca_topic_score_codex":0.0014445198,"about_ca_topic_score_gemma":0.0038756118,"teacher_disagreement_score":0.001524189,"about_ca_system_score_codex":0.0009537052,"about_ca_system_score_gemma":0.00097371306,"threshold_uncertainty_score":0.008060813},"labels":[],"label_agreement":null},{"id":"W7132950340","doi":"","title":"Fabrication of In-mold Pressure and Temperature Sensors using Masked Wire-arc Thermal Spray","year":2022,"lang":"","type":"dissertation","venue":"TSpace","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"University of Toronto","keywords":"Fabrication; Thermocouple; Gauge factor; Strain gauge; Deposition (geology); Pressure sensor; Molding (decorative); Coating; Bending; Thermal spraying","score_opus":0.014988969109361533,"score_gpt":0.2780030123773574,"score_spread":0.2630140432679959,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7132950340","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9548306,0.00045738506,0.039902586,0.000056190176,0.000056968674,0.00012240872,0.0002515144,0.00041531987,0.0039071785],"genre_scores_gemma":[0.930158,0.0005666961,0.06344242,0.000023010005,0.000013405792,0.000075747324,0.00019893597,0.00006599292,0.0054556928],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99986315,0.000006588839,0.0000062269414,0.000037132537,0.000071553404,0.00001538375],"domain_scores_gemma":[0.9998779,0.000019211479,0.000045224737,0.000023333934,0.000025138277,0.000009240803],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000116193245,0.00029916564,0.00017382899,0.00014193456,0.00010618679,0.00024010956,0.00027836225,0.00014609155,0.0007241823],"category_scores_gemma":[0.00020919839,0.0002432289,0.00014369807,0.00010872934,0.00013774208,0.00020856349,0.00017055635,0.00024019978,0.00028026654],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000008866808,0.000010164468,0.00008359983,0.000020199659,0.0000016959725,0.000019845302,0.00001583025,0.00008428943,0.9974419,0.000051696723,0.000027570928,0.0022343765],"study_design_scores_gemma":[0.000001983705,0.00005024602,0.000746999,8.4430883e-7,0.0000024680005,0.00002719619,0.0000042802985,0.0008065551,0.99779046,0.000008127748,0.00055934757,0.000001442385],"about_ca_topic_score_codex":0.00045870102,"about_ca_topic_score_gemma":0.0009515338,"teacher_disagreement_score":0.0007241823,"about_ca_system_score_codex":0.00019992654,"about_ca_system_score_gemma":0.00021693959,"threshold_uncertainty_score":0.0024226904},"labels":[],"label_agreement":null},{"id":"W965931222","doi":"10.1007/978-3-642-21538-4_11","title":"Thermal Dynamic Modeling and Control of Injection Moulding Process","year":2011,"lang":"en","type":"book-chapter","venue":"Lecture notes in computer science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Injection moulding; Computer science; PID controller; Controller (irrigation); Process (computing); Finite element method; Control theory (sociology); Control engineering; Identification (biology); Thermal; System dynamics; Artificial neural network; Radial basis function; Temperature control; Mechanical engineering; Control (management); Engineering; Artificial intelligence","score_opus":0.013530930999018746,"score_gpt":0.2136766185243147,"score_spread":0.20014568752529593,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W965931222","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"metacan-v3-hybrid-931329e0061c","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.090159684,0.001525448,0.8723427,0.0002270507,0.00012491488,0.000084003805,0.00012488558,0.0009810046,0.034430247],"genre_scores_gemma":[0.97488767,0.0005269471,0.013498762,0.000025252208,0.000019297075,0.000060365648,0.000075113014,0.000060791193,0.010845806],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99988925,0.000017745357,0.0000036039162,0.000023874754,0.00005320702,0.0000123767195],"domain_scores_gemma":[0.9999509,0.000017742848,0.000009799092,0.00000622965,0.000012851583,0.0000024528726],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00014052165,0.00041606135,0.00053995213,0.0001886141,0.00027016396,0.00052557053,0.00068099523,0.0004069845,0.0021270602],"category_scores_gemma":[0.00018145045,0.00029777642,0.00045880093,0.0001859612,0.00024961255,0.0004253794,0.00027641578,0.00032176462,0.00030136187],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000063719075,0.000030040002,0.00016414015,0.00006620695,0.00001252576,0.00003953228,0.000031280066,0.94661707,0.027864698,0.0045396746,0.00033189348,0.020239277],"study_design_scores_gemma":[0.000002862808,0.000015240954,0.00014321394,0.0000018650157,0.0000032324524,0.0000064761443,0.0000019909812,0.99610776,0.002808007,0.00038661313,0.0005203324,0.0000023858192],"about_ca_topic_score_codex":0.003429539,"about_ca_topic_score_gemma":0.0025595776,"teacher_disagreement_score":0.003429539,"about_ca_system_score_codex":0.00042055015,"about_ca_system_score_gemma":0.0002953466,"threshold_uncertainty_score":0.0071157217},"labels":[],"label_agreement":null}]}