{"meta":{"query_hash":"008a0d3ff3e8","filters":{"venue":"3D Printing and Additive Manufacturing"},"cohort_total":19,"direct_labels_cover":0,"predictions_cover":19,"exported":19,"export_cap":100000,"truncated":false,"label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"permalink":"https://metacan.xera.ac/q/008a0d3ff3e8","api":"https://metacan.xera.ac/api/v1/cohort?venue=3D+Printing+and+Additive+Manufacturing"},"results":[{"id":"W2113581305","doi":"10.1089/3dp.2014.0006","title":"Bioplotting Alginate/Hyaluronic Acid Hydrogel Scaffolds with Structural Integrity and Preserved Schwann Cell Viability","year":2014,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Nerve injury and regeneration","field":"Neuroscience","cited_by":72,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Saskatchewan","funders":"Natural Sciences and Engineering Research Council of Canada; Saskatchewan Health Research Foundation","keywords":"Scaffold; Hyaluronic acid; Polyethylenimine; Viability assay; Biocompatibility; Tissue engineering; Biomedical engineering; Materials science; Chemistry; Nanotechnology; Cell; Anatomy; Biochemistry","score_opus":0.013659457498215266,"score_gpt":0.22769936495462204,"score_spread":0.21403990745640677,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2113581305","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9972203,0.00003603065,0.00076584576,0.000118265496,0.00010347956,0.000257467,0.000019866422,0.00015253416,0.0013262384],"genre_scores_gemma":[0.99824166,0.000006434275,0.0013425215,0.00008150862,0.00014314431,0.000015103249,0.000007347118,0.000025468384,0.00013679363],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.998131,0.00024153694,0.000243458,0.0007573028,0.00021439153,0.0004123112],"domain_scores_gemma":[0.9991119,0.00029487244,0.00017613069,0.00025055266,0.000036061923,0.0001305176],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00046543896,0.00027852634,0.00023826426,0.00007922215,0.0006786323,0.00021173291,0.00015949272,0.00009402498,0.000033478496],"category_scores_gemma":[0.00023475426,0.00020914392,0.000041003528,0.00007646835,0.0003009826,0.0004017391,0.0002635165,0.00039412343,0.0000052151104],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00012865805,0.000066282555,0.011392635,0.00043903632,0.0000227686,0.000018216015,0.00071280857,0.0001908093,0.8886655,0.0018152348,0.000011775661,0.096536286],"study_design_scores_gemma":[0.00045434968,0.0001482206,0.021498092,0.00008608184,0.000016683576,0.000023466002,0.000060081675,0.0069310064,0.9693796,0.00084128196,0.00027566327,0.00028546233],"about_ca_topic_score_codex":0.000053382286,"about_ca_topic_score_gemma":0.000013977823,"teacher_disagreement_score":0.096250825,"about_ca_system_score_codex":0.000029845529,"about_ca_system_score_gemma":0.000021653788,"threshold_uncertainty_score":0.8528642},"labels":[],"label_agreement":null},{"id":"W2757740176","doi":"10.1089/3dp.2017.0028","title":"Rapid Fabrication of Multilayer Microfluidic Devices Using the Liquid Crystal Display-Based Stereolithography 3D Printing System","year":2017,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"3D Printing in Biomedical Research","field":"Engineering","cited_by":51,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Kelowna General Hospital; University of British Columbia, Okanagan Campus; University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Stereolithography; Fabrication; Microfluidics; 3D printing; Liquid-crystal display; Materials science; Process (computing); Fused deposition modeling; Nanotechnology; Computer hardware; Computer science; Optoelectronics; Composite material","score_opus":0.025224675857817933,"score_gpt":0.2695418980802985,"score_spread":0.24431722222248056,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2757740176","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9649607,0.00046566364,0.032233514,0.000034298053,0.00029577676,0.00040530288,0.000035563775,0.00022228919,0.0013468941],"genre_scores_gemma":[0.99345446,0.00007242583,0.006091803,0.000015159811,0.00025190905,0.00003051918,0.00000961488,0.00006150705,0.000012626541],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9977865,0.00013852742,0.0005502565,0.00045576307,0.00045170108,0.00061725476],"domain_scores_gemma":[0.998139,0.00047154265,0.0003787741,0.0007266785,0.00013674023,0.00014723322],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0011292264,0.00033277116,0.00037188706,0.00024664702,0.0010016635,0.00031854055,0.00064605003,0.00013988862,0.000030355099],"category_scores_gemma":[0.00034401575,0.00026529626,0.00013727142,0.00010072801,0.0004494658,0.00024590193,0.00046593035,0.0005181745,0.0000053964636],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0002638067,0.00017834596,0.043727253,0.010499046,0.0011180645,0.00006822384,0.0031875672,0.004683371,0.30584985,0.0003743298,0.00010313601,0.629947],"study_design_scores_gemma":[0.00062767393,0.00005181015,0.13668017,0.001884899,0.00007743637,0.000017354812,0.00055798347,0.117429264,0.7379589,0.000004846487,0.004233011,0.00047661984],"about_ca_topic_score_codex":0.00015258855,"about_ca_topic_score_gemma":0.0000046101068,"teacher_disagreement_score":0.6294704,"about_ca_system_score_codex":0.00008000651,"about_ca_system_score_gemma":0.00003508678,"threshold_uncertainty_score":0.9999799},"labels":[],"label_agreement":null},{"id":"W2762342641","doi":"10.1089/3dp.2017.0032","title":"3D Printed Sandstone Strength: Curing of Furfuryl Alcohol Resin-Based Sandstones","year":2017,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Innovations in Concrete and Construction Materials","field":"Engineering","cited_by":61,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"CMG Reservoir Simulation Foundation","keywords":"Furfuryl alcohol; Compressive strength; Curing (chemistry); Materials science; Composite material; Bed; Classification of discontinuities; Flexural strength; Fabrication; Mechanical strength; Geotechnical engineering; Geology; Mathematics; Chemistry; Anisotropy","score_opus":0.016616961395115468,"score_gpt":0.2511222656061743,"score_spread":0.2345053042110588,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2762342641","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98635834,0.00004686399,0.0020558028,0.000030889805,0.00055819395,0.0001430689,0.000056535482,0.00021798603,0.010532323],"genre_scores_gemma":[0.99377257,0.000039202303,0.005810067,0.000014301547,0.00021406828,0.000018382183,0.00001787637,0.000035329595,0.0000782222],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99885184,0.00002584063,0.00041322765,0.0002704033,0.00015212648,0.00028659464],"domain_scores_gemma":[0.9990743,0.00011267012,0.00024226692,0.00044410359,0.00007528159,0.000051424846],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002512478,0.00023451149,0.00030913827,0.0001808227,0.00047888662,0.00016914862,0.00021619663,0.00009619435,0.00021474468],"category_scores_gemma":[0.00013038683,0.0002405825,0.0000551409,0.000041181636,0.00019489459,0.00021465925,0.00012347505,0.00020772204,0.000007653059],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009158874,0.00003326337,0.008460687,0.00095871947,0.0003685881,0.000032284144,0.00061826996,0.0032999404,0.13508879,0.0014840639,0.00016175749,0.84940207],"study_design_scores_gemma":[0.00062006025,0.000016104097,0.044836443,0.00041467944,0.000027698761,0.000009992021,0.000089496,0.0029654824,0.94774777,0.000082570295,0.0028957294,0.00029400698],"about_ca_topic_score_codex":0.00004148671,"about_ca_topic_score_gemma":0.0000049889795,"teacher_disagreement_score":0.84910804,"about_ca_system_score_codex":0.00002954588,"about_ca_system_score_gemma":0.000019904004,"threshold_uncertainty_score":0.98106694},"labels":[],"label_agreement":null},{"id":"W2966886624","doi":"10.1089/3dp.2018.0102","title":"Tendon-Driven Functionally Gradient Soft Robotic Gripper 3D Printed with Intermixed Extrudate of Hard and Soft Thermoplastics","year":2019,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Soft Robotics and Applications","field":"Engineering","cited_by":41,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"Natural Sciences and Engineering Research Council of Canada; Alberta Innovates","keywords":"Materials science; Composite material; 3d printed; Die swell; Delamination (geology); Polymer; Soft robotics; Fused deposition modeling; 3D printing; Extrusion; Biomedical engineering; Computer science","score_opus":0.007208990379992002,"score_gpt":0.18210834350811664,"score_spread":0.17489935312812463,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2966886624","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9287895,0.000043419244,0.06978897,0.000023076453,0.00013590016,0.0002502093,0.000022536593,0.00013771947,0.0008086816],"genre_scores_gemma":[0.9916953,0.000039148134,0.007919405,0.000017649045,0.000053708103,0.000023390665,0.000024419242,0.00004113784,0.00018584305],"study_design_codex":"simulation_or_modeling","study_design_gemma":"observational","domain_scores_codex":[0.99907744,0.0000132613795,0.00023209504,0.00029933377,0.00012795553,0.00024993662],"domain_scores_gemma":[0.99939334,0.00020427736,0.000087047374,0.00018452766,0.000049689756,0.00008112752],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000070448245,0.00021909927,0.00025093128,0.00009189014,0.000087755565,0.000050008315,0.000088098845,0.00005341002,0.000073797],"category_scores_gemma":[0.000021172127,0.0001841555,0.00003495652,0.000053103795,0.000098538636,0.00008992251,0.00010398184,0.00022438196,0.000014279478],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00013724939,0.00020398831,0.06597194,0.0014731564,0.0012401454,0.000024444744,0.002842054,0.61847234,0.038347825,0.0028356293,0.00015696598,0.26829425],"study_design_scores_gemma":[0.0015928692,0.00020800551,0.6920971,0.0009780787,0.0001813981,0.00010008275,0.0005750149,0.23872861,0.060475573,0.00030217099,0.0038309866,0.00093009387],"about_ca_topic_score_codex":0.0000071797303,"about_ca_topic_score_gemma":0.000006355961,"teacher_disagreement_score":0.62612516,"about_ca_system_score_codex":0.000025477571,"about_ca_system_score_gemma":0.000010904108,"threshold_uncertainty_score":0.75096434},"labels":[],"label_agreement":null},{"id":"W2967430692","doi":"10.1089/3dp.2019.0023","title":"Workflow Development of a 3D Printed Novel Implant Abutment","year":2019,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Dental Implant Techniques and Outcomes","field":"Dentistry","cited_by":9,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Thames Valley Children's Centre; Western University","funders":"Schulich School of Medicine and Dentistry; Schulich School of Medicine and Dentistry, Western University","keywords":"Abutment; Implant; 3D printing; Materials science; Stereolithography; Workflow; Titanium; Swaging; Fabrication; Dental implant; Computer science; Engineering drawing; Mechanical engineering; Engineering; Composite material; Structural engineering; Metallurgy; Database; Medicine","score_opus":0.01800489244183659,"score_gpt":0.2628735544829894,"score_spread":0.2448686620411528,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2967430692","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9914306,0.000025474543,0.003658946,0.0000070768947,0.0004546879,0.000340961,0.000062272054,0.00014525537,0.0038747662],"genre_scores_gemma":[0.9694942,0.000008965786,0.028888585,0.000051523228,0.000040197603,0.000018880251,0.000047737976,0.00002399835,0.0014258962],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99861896,0.000018403003,0.00042324566,0.00036650655,0.00023326521,0.0003396075],"domain_scores_gemma":[0.999344,0.00011633789,0.00022260156,0.00020987936,0.000031029253,0.000076162476],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021247701,0.00022923945,0.0003267241,0.000113010516,0.00010475987,0.000058392994,0.00015710514,0.00007869457,0.00034768996],"category_scores_gemma":[0.000018331568,0.00019848713,0.00006540788,0.000045573466,0.00003290094,0.00009996279,0.00036070115,0.00019764104,0.00013092344],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00011126035,0.00022742462,0.022624264,0.00048965967,0.00034383612,0.00019571082,0.0013744724,0.000018991428,0.03230765,0.00047357104,0.00021406802,0.9416191],"study_design_scores_gemma":[0.0006870076,0.000034092503,0.29693264,0.00048119907,0.000019877003,0.0004611688,0.00018258928,0.00008348439,0.6845328,0.00003204581,0.01624644,0.00030662975],"about_ca_topic_score_codex":0.000037669768,"about_ca_topic_score_gemma":0.000021902779,"teacher_disagreement_score":0.9413125,"about_ca_system_score_codex":0.000058917984,"about_ca_system_score_gemma":0.00002220006,"threshold_uncertainty_score":0.809407},"labels":[],"label_agreement":null},{"id":"W3018084364","doi":"10.1089/3dp.2020.0106","title":"Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain","year":2020,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Infection Control and Ventilation","field":"Medicine","cited_by":125,"is_retracted":false,"has_abstract":true,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Queen's University; Queen's University Belfast","keywords":"Pandemic; Coronavirus disease 2019 (COVID-19); Face shield; Supply chain; Personal protective equipment; 2019-20 coronavirus outbreak; Business; Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2); Supply and demand; Health care; Marketing; Medicine; Economic growth; Economics; Virology","score_opus":0.024529330052773815,"score_gpt":0.2816140090113964,"score_spread":0.2570846789586226,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3018084364","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98914886,0.0000602014,0.0006027679,0.006076166,0.00004495695,0.00063094107,0.00027814094,0.000055795448,0.0031021526],"genre_scores_gemma":[0.98443735,0.00006159217,0.000027416298,0.015049926,0.0002963633,0.0000426162,0.000039987714,0.000015668182,0.000029084264],"study_design_codex":"design_other","study_design_gemma":"observational","domain_scores_codex":[0.9987578,0.0001708819,0.00022262638,0.0003714322,0.00018806811,0.00028921227],"domain_scores_gemma":[0.998934,0.00060364325,0.00013409293,0.00012299698,0.000017661429,0.00018763787],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00043346122,0.0002485483,0.00026081572,0.000058443486,0.00037598348,0.0001168506,0.00006412532,0.00008398964,0.000079601436],"category_scores_gemma":[0.00031418906,0.00014208496,0.00006753524,0.00006851291,0.000111166264,0.00006673454,0.00007777662,0.00043012123,0.0000025849229],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0013881796,0.00017829618,0.45536909,0.00048300019,0.00060334505,0.00028131346,0.014629644,0.00065497967,0.0002697266,0.002246151,0.001808084,0.52208817],"study_design_scores_gemma":[0.0021608248,0.00024332387,0.95366746,0.0002622622,0.00008402758,0.00011219772,0.0018488697,0.0031724398,0.008365561,0.0003541304,0.029419445,0.0003094854],"about_ca_topic_score_codex":0.0002610612,"about_ca_topic_score_gemma":0.00012249518,"teacher_disagreement_score":0.5217787,"about_ca_system_score_codex":0.000115750525,"about_ca_system_score_gemma":0.000044312583,"threshold_uncertainty_score":0.57940567},"labels":[],"label_agreement":null},{"id":"W3131586924","doi":"10.1089/3dp.2020.0140","title":"Three-Dimensional Printing of Calcium Carbonate/Hydroxyapatite Scaffolds at Low Temperature for Bone Tissue Engineering","year":2021,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Bone Tissue Engineering Materials","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Scaffold; Biocompatibility; Materials science; Tissue engineering; Bone tissue; Biomedical engineering; Artificial bone; Nanotechnology; Composite material; Metallurgy","score_opus":0.006973160912402069,"score_gpt":0.2020614319488688,"score_spread":0.19508827103646673,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3131586924","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99411905,0.00074843486,0.003371731,0.00002056683,0.0006894422,0.00032181686,0.00013635424,0.00042600362,0.0001666161],"genre_scores_gemma":[0.98363096,0.000019365816,0.015517952,0.0000110162555,0.00033250387,0.00006307653,0.00008963548,0.00013128312,0.00020421011],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9982217,0.000017278584,0.00051316735,0.000465822,0.00022507287,0.00055693754],"domain_scores_gemma":[0.9991191,0.00025479833,0.00010456546,0.00029472742,0.0000936844,0.0001331096],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00025889568,0.00041502752,0.00056818547,0.00014595441,0.00013231872,0.00007408482,0.00011149862,0.00019470848,0.000102554826],"category_scores_gemma":[0.00011305623,0.0004607178,0.000098768,0.000108060376,0.000040379335,0.00013941765,0.00025302332,0.00020008368,0.0000069987964],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000011110051,0.000017627443,0.00007320473,0.0012700973,0.0001370982,0.000048326383,0.00027367438,0.107109554,0.88393265,0.00008218619,0.000092922935,0.0069515365],"study_design_scores_gemma":[0.00046321572,0.000021021711,0.0052040243,0.00063388306,0.00003919372,0.000068208785,0.00001624281,0.028176509,0.9626461,0.000026144158,0.0022356447,0.0004697795],"about_ca_topic_score_codex":0.000022489196,"about_ca_topic_score_gemma":0.000012881738,"teacher_disagreement_score":0.078933045,"about_ca_system_score_codex":0.00009833157,"about_ca_system_score_gemma":0.000022012486,"threshold_uncertainty_score":0.99978447},"labels":[],"label_agreement":null},{"id":"W4200322528","doi":"10.1089/3dp.2021.0194","title":"Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine","year":2021,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université de Sherbrooke","funders":"","keywords":"Materials science; Fabrication; Polyamide; Composite material; 3D printing; Fused filament fabrication; Deflection (physics); Composite number; Thermoplastic; Acrylonitrile butadiene styrene; Finite element method; Structural engineering; Engineering","score_opus":0.009486778722191174,"score_gpt":0.21420060123596515,"score_spread":0.20471382251377399,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4200322528","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9881788,0.00020842213,0.007505574,0.000066834626,0.00029688614,0.00025336785,0.00076850574,0.0006819557,0.0020396467],"genre_scores_gemma":[0.98762614,0.00041700606,0.011090189,0.000054909066,0.00022849033,0.000082958206,0.00019768812,0.00009913204,0.00020347016],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99782586,0.00007177196,0.000583876,0.00069049024,0.00018958503,0.0006384045],"domain_scores_gemma":[0.99847436,0.00067257887,0.0002064577,0.00037100323,0.00013699883,0.00013861277],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00030976805,0.0005513972,0.0007212809,0.00024729673,0.00033611755,0.00014914732,0.00016248849,0.00022020812,0.00018429435],"category_scores_gemma":[0.0001798164,0.0005642403,0.00011336012,0.000073640695,0.00024266377,0.00020903494,0.0007092024,0.0003360111,0.0000028175918],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000078849516,0.00006378756,0.00007805842,0.0011185888,0.00058712135,0.0010031338,0.0005039156,0.00031235177,0.027402002,0.001407718,0.0005019535,0.96694255],"study_design_scores_gemma":[0.0007673394,0.000059638805,0.0039851647,0.00029901153,0.000092686554,0.0010863169,0.00040834383,0.0005559761,0.9824939,0.0017144567,0.007936227,0.000600937],"about_ca_topic_score_codex":0.000110064364,"about_ca_topic_score_gemma":0.00004657768,"teacher_disagreement_score":0.96634156,"about_ca_system_score_codex":0.00006944991,"about_ca_system_score_gemma":0.000020951778,"threshold_uncertainty_score":0.99968094},"labels":[],"label_agreement":null},{"id":"W4281786415","doi":"10.1089/3dp.2021.0247","title":"Experimental Study on Mechanical Properties of 3D-Printed Specimens of Iron Oxide, Quartz, and Bedded Composites Under Uniaxial Compression and Indirect Tensile Strength","year":2022,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Innovations in Concrete and Construction Materials","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Alberta","funders":"","keywords":"Ultimate tensile strength; Materials science; Composite material; Compressive strength; Brittleness; Breakage; Compression (physics); Quartz","score_opus":0.018794548825222395,"score_gpt":0.22711563490069325,"score_spread":0.20832108607547087,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4281786415","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9992184,0.000047770845,0.000033098044,0.0000052137325,0.000103805396,0.00028422708,0.000036602225,0.000058923,0.00021197194],"genre_scores_gemma":[0.9993297,0.0000048309935,0.0005698477,0.000007314811,0.000026744854,0.000028116392,0.000008517899,0.000015482,0.000009474962],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9991869,0.000081890794,0.00028027417,0.00019463834,0.0001385656,0.00011777355],"domain_scores_gemma":[0.99968517,0.00007421737,0.00009335584,0.000099956065,0.000023542923,0.000023773393],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00013660407,0.00014192643,0.00024634783,0.00012298922,0.00018733305,0.000025482452,0.00005019364,0.000028295477,0.00006357873],"category_scores_gemma":[0.000009659905,0.00013219101,0.000014584194,0.00004605992,0.000079952806,0.00005530079,0.00020556722,0.00015246702,2.330463e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000073320065,0.00006929059,0.0003205254,0.000058300524,0.00007391738,0.0000021763472,0.0011273933,0.0006917808,0.99323475,0.00019585618,0.000005644776,0.004147016],"study_design_scores_gemma":[0.00057030807,0.00023017984,0.008669044,0.0001030446,0.00001683104,0.000011247824,0.006764189,0.00093305483,0.9825087,0.000012644826,0.000044455657,0.00013626991],"about_ca_topic_score_codex":0.000021392492,"about_ca_topic_score_gemma":9.1398823e-7,"teacher_disagreement_score":0.010726049,"about_ca_system_score_codex":0.000023483983,"about_ca_system_score_gemma":0.0000051262714,"threshold_uncertainty_score":0.53905934},"labels":[],"label_agreement":null},{"id":"W4282918546","doi":"10.1089/3dp.2022.0018","title":"Design of Lattice Structures Based on U* Load Path Analysis","year":2022,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Topology Optimization in Engineering","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Manitoba","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Truss; Lattice (music); Stiffness; Finite element method; Cantilever; Structural engineering; Topology optimization; Topology (electrical circuits); Computer science; Materials science; Mechanical engineering; Mathematics; Engineering; Physics; Acoustics","score_opus":0.008068982027421614,"score_gpt":0.19912945209210597,"score_spread":0.19106047006468435,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4282918546","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.19151016,0.00007405821,0.80579066,0.00001529885,0.00020983761,0.00015713407,0.000063841115,0.0003227886,0.0018562009],"genre_scores_gemma":[0.9716328,0.0000074344553,0.028211616,0.00002848581,0.00002595206,0.000025219306,0.000016094311,0.000026324913,0.000026101916],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99915516,0.00006237741,0.0001931185,0.00020117882,0.00019217726,0.0001960083],"domain_scores_gemma":[0.99943477,0.00027900806,0.00005961745,0.00016740663,0.00001931032,0.00003986584],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021383131,0.00015394765,0.00021394019,0.00027158452,0.0001511826,0.000016469205,0.00010720009,0.00003437267,0.00049878855],"category_scores_gemma":[0.000038721002,0.00016934736,0.000051709645,0.00019890002,0.000033027995,0.000042503547,0.000068168854,0.000258262,0.0000010839954],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000008145799,0.0000067412593,0.00019181472,0.000029316532,0.0001553739,0.0000051166344,0.0002154793,0.9939205,0.00015063523,0.00007438278,0.000018657569,0.005223854],"study_design_scores_gemma":[0.00022978941,0.00003312245,0.008204784,0.000012323604,0.000110644345,0.000002548735,0.00010329679,0.9630885,0.027651656,0.00005400878,0.00031908776,0.0001902467],"about_ca_topic_score_codex":0.000007767289,"about_ca_topic_score_gemma":4.4389753e-7,"teacher_disagreement_score":0.78012264,"about_ca_system_score_codex":0.00007502501,"about_ca_system_score_gemma":0.000011390372,"threshold_uncertainty_score":0.69057846},"labels":[],"label_agreement":null},{"id":"W4283831539","doi":"10.1089/3dp.2021.0147","title":"Improving the 3D Printability of Sugar Glass to Engineer Sacrificial Vascular Templates","year":2022,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"3D Printing in Biomedical Research","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Centre hospitalier universitaire de Québec; Université Laval; McGill University","funders":"Fonds de recherche du Québec – Nature et technologies; Breakthrough T1D Canada; Natural Sciences and Engineering Research Council of Canada; Michigan Diabetes Research Center, University of Michigan; Centre québécois sur les matériaux fonctionnels; Canada Research Chairs; McGill University","keywords":"Materials science; Glass transition; Sucrose; Tissue engineering; Template; Dissolution; Sugar; Composite material; Chemical engineering; Nanotechnology; Biomedical engineering; Chemistry; Polymer","score_opus":0.010241481257091139,"score_gpt":0.2266506461630728,"score_spread":0.21640916490598164,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4283831539","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9866058,0.000094786534,0.011125842,0.00007760676,0.00032613083,0.00042552405,0.000050183586,0.00022430967,0.001069821],"genre_scores_gemma":[0.9954332,0.00001382404,0.0041643786,0.00003183467,0.00015727864,0.00010091415,0.000008734745,0.00004558914,0.000044209097],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99801505,0.00012739569,0.00038033308,0.00038672364,0.00055782736,0.0005326531],"domain_scores_gemma":[0.9987133,0.0006481872,0.00006115517,0.00038684378,0.00004845225,0.00014203228],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0015214538,0.00022499228,0.00027142902,0.00016371124,0.00040187032,0.00006282861,0.0004115508,0.000055317298,0.00035493766],"category_scores_gemma":[0.0005127674,0.00019074029,0.00009179358,0.0002072176,0.000117955446,0.000067171604,0.0009225338,0.0007765195,0.000010828007],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00004394634,0.00009021458,0.002995884,0.00078875944,0.00031992275,0.000022502123,0.003401907,0.049334843,0.037573833,0.00038203545,0.0002072826,0.90483886],"study_design_scores_gemma":[0.00074336707,0.00019061065,0.12108185,0.0001738402,0.00007131517,0.000030874664,0.0017500543,0.070443206,0.73111504,0.00026179085,0.07315679,0.0009812419],"about_ca_topic_score_codex":0.0001558092,"about_ca_topic_score_gemma":0.000006977609,"teacher_disagreement_score":0.90385765,"about_ca_system_score_codex":0.00012542178,"about_ca_system_score_gemma":0.000028684979,"threshold_uncertainty_score":0.7778163},"labels":[],"label_agreement":null},{"id":"W4293240718","doi":"10.1089/3dp.2022.0012","title":"Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization","year":2022,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Western University","funders":"","keywords":"Particle swarm optimization; Software; Ideal (ethics); Computer science; 3D printing; Particle (ecology); Software engineering; Engineering; Mechanical engineering; Operating system; Geology; Algorithm","score_opus":0.03550200683438716,"score_gpt":0.2816153709894851,"score_spread":0.24611336415509794,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4293240718","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.69494027,0.000009969696,0.30373278,0.000021986834,0.00014529661,0.00049927965,0.00013444264,0.0005009785,0.000015033789],"genre_scores_gemma":[0.89814395,0.00000476516,0.10121426,0.00003406672,0.00006449321,0.00027698654,0.00016895759,0.0000814034,0.000011112771],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99799204,0.0001406056,0.0005782384,0.0005213467,0.00023101215,0.00053674827],"domain_scores_gemma":[0.9987872,0.00037472334,0.00036449236,0.00031744887,0.00007227155,0.00008382526],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0006513504,0.00029807852,0.00035487846,0.00015023602,0.0008245813,0.00023826728,0.00040290455,0.0000706419,0.00016094795],"category_scores_gemma":[0.0001661935,0.00034640898,0.000065417946,0.00016676745,0.000078910016,0.0003806014,0.0005439664,0.00022386975,5.900828e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006758501,0.000059297377,0.0019447494,0.00014023445,0.00008576991,0.0000018965793,0.0007891998,0.7512024,0.0054771705,0.000059694306,0.000017808039,0.2401542],"study_design_scores_gemma":[0.00078178494,0.000109922315,0.0033017034,0.00005293458,0.000048864254,0.0000032942455,0.0015000674,0.3219658,0.671539,0.00010298409,0.00026842733,0.00032519174],"about_ca_topic_score_codex":0.00027740592,"about_ca_topic_score_gemma":0.000011536903,"teacher_disagreement_score":0.6660618,"about_ca_system_score_codex":0.00016671118,"about_ca_system_score_gemma":0.000037035847,"threshold_uncertainty_score":0.9998988},"labels":[],"label_agreement":null},{"id":"W4328051503","doi":"10.1089/3dp.2022.0241","title":"Development of 3D-Printable Albumin–Alginate Foam for Wound Dressing Applications","year":2023,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Wound Healing and Treatments","field":"Medicine","cited_by":12,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure; Université de Montréal; University of Prince Edward Island","funders":"","keywords":"Biomaterial; Materials science; Porosity; Leaching (pedology); Chemical engineering; Sodium alginate; Biomedical engineering; Composite material; Sodium; Chemistry; Nanotechnology","score_opus":0.03766590224589692,"score_gpt":0.3181220989771585,"score_spread":0.28045619673126154,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4328051503","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98718065,0.00008844599,0.008685671,0.00010768677,0.00006108136,0.0006886755,0.000025716337,0.00016333997,0.002998717],"genre_scores_gemma":[0.9490075,0.000028030003,0.048945922,0.000025484285,0.00010183179,0.00026464445,0.000110638,0.000027567057,0.0014883877],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9989714,0.000010908153,0.00027566237,0.00030165075,0.00013173428,0.00030866291],"domain_scores_gemma":[0.9993954,0.00018221239,0.0001244873,0.00015040538,0.000058583908,0.00008892746],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002558865,0.00014729162,0.00025115968,0.00014619119,0.00039681947,0.000030288176,0.000045956065,0.000055357777,0.00002051862],"category_scores_gemma":[0.00003841384,0.0001339113,0.00004405459,0.00008765052,0.00004892235,0.000048257833,0.00008401882,0.000113593924,0.000024040875],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000060197355,0.00013037524,0.0027237863,0.0011825684,0.00028064338,0.000009844985,0.0020359652,0.000032690845,0.0044223946,0.00029184073,0.00008599619,0.9887437],"study_design_scores_gemma":[0.0022059367,0.000078127305,0.13281018,0.0011557459,0.00017324374,0.000023072165,0.0009785747,0.00056268275,0.73883575,0.00054406817,0.12230835,0.00032429828],"about_ca_topic_score_codex":0.000016843343,"about_ca_topic_score_gemma":0.0000041141543,"teacher_disagreement_score":0.9884194,"about_ca_system_score_codex":0.000059260332,"about_ca_system_score_gemma":0.00007486925,"threshold_uncertainty_score":0.54607445},"labels":[],"label_agreement":null},{"id":"W4387473881","doi":"10.1089/3dp.2023.0114","title":"Establishment of Select Printing Parameters for Low-Cost Fused Deposition Modeling Printed Cast Iron Through Experimental Optimization","year":2023,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Guelph","funders":"","keywords":"3D printing; 3d printed; Deposition (geology); Cast iron; Fused deposition modeling; Materials science; Computer science; Process engineering; Metallurgy; Engineering drawing; Manufacturing engineering; Engineering; Geology","score_opus":0.022382433433038043,"score_gpt":0.24499683347092494,"score_spread":0.2226144000378869,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4387473881","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.73351735,0.00003464767,0.26374146,0.000023019686,0.00019022729,0.00066581654,0.00005238096,0.0014254528,0.0003496245],"genre_scores_gemma":[0.9524917,0.00009958774,0.04676876,0.0000138723435,0.00007593889,0.00025240288,0.00017880641,0.000096839896,0.000022083283],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99788815,0.00004569754,0.0005718519,0.000583966,0.00023453808,0.0006757793],"domain_scores_gemma":[0.9990593,0.00031247005,0.00019346952,0.0002860904,0.00007793629,0.0000707379],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00033086268,0.0004279597,0.0004281317,0.00031701152,0.00033721593,0.00012974149,0.00021896671,0.00017579,0.00001941268],"category_scores_gemma":[0.00018377134,0.0004549805,0.0001302509,0.00021616739,0.000097172815,0.000350095,0.000274392,0.0003452432,0.0000049802265],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003578973,0.000038938517,0.00006759022,0.00047254594,0.00010251202,0.000007532293,0.001113655,0.9074948,0.005881963,0.00007839674,0.000045156186,0.08466112],"study_design_scores_gemma":[0.00040256005,0.000036895723,0.00023161552,0.0003061269,0.00002287274,0.0000067085994,0.00084738684,0.43102387,0.566686,0.00006752467,0.00007090596,0.00029752645],"about_ca_topic_score_codex":0.000049515595,"about_ca_topic_score_gemma":0.0000037105742,"teacher_disagreement_score":0.560804,"about_ca_system_score_codex":0.00013531787,"about_ca_system_score_gemma":0.000014022789,"threshold_uncertainty_score":0.9997902},"labels":[],"label_agreement":null},{"id":"W4387503692","doi":"10.1089/3dp.2023.0086","title":"Additive Manufacturability and Parametric Studies on an Extended Three-Dimensional Re-Entrant Auxetic Structure with Angled Struts","year":2023,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Cellular and Composite Structures","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"First Nations Health and Social Secretariat of Manitoba; University of Manitoba","funders":"Ministère de la Défense Nationale","keywords":"Auxetics; Materials science; Parametric statistics; Design for manufacturability; Finite element method; Composite material; Honeycomb structure; Fabrication; Stiffness; Reentrancy; Structural engineering; Mechanical engineering; Computer science; Engineering; Mathematics","score_opus":0.013365348240980792,"score_gpt":0.2354923455625671,"score_spread":0.2221269973215863,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4387503692","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9981625,0.00023435995,0.00007581358,0.00002614442,0.00022740345,0.00034276844,0.000209823,0.0005144661,0.00020671517],"genre_scores_gemma":[0.99884814,0.00006996772,0.00068571884,0.000034203054,0.00013495087,0.000020849937,0.00012926893,0.00005470286,0.000022197308],"study_design_codex":"design_other","study_design_gemma":"observational","domain_scores_codex":[0.9981524,0.000074962874,0.00028712975,0.0006621996,0.00031958317,0.0005037415],"domain_scores_gemma":[0.9989529,0.00045349365,0.00008182413,0.00028947592,0.00005154248,0.00017071553],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00016368958,0.0004632233,0.00043634567,0.00028499373,0.00036960302,0.000119649114,0.000118372074,0.00010746001,0.00008160062],"category_scores_gemma":[0.00005630126,0.00035850215,0.000050247047,0.00020399054,0.0001955939,0.0001741717,0.00012691549,0.00048447063,0.000005312778],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00073214504,0.000117810094,0.0033773175,0.001216807,0.002154833,0.00071763474,0.007141289,0.1224281,0.009207354,0.00055536325,0.00032848466,0.8520229],"study_design_scores_gemma":[0.001244169,0.0004172864,0.6078971,0.00036612386,0.00013728737,0.00009225594,0.0012244703,0.01815981,0.36571428,0.0035227432,0.00024027092,0.0009842225],"about_ca_topic_score_codex":0.000018703646,"about_ca_topic_score_gemma":0.00010987061,"teacher_disagreement_score":0.85103863,"about_ca_system_score_codex":0.00006124209,"about_ca_system_score_gemma":0.000012130954,"threshold_uncertainty_score":0.9998867},"labels":[],"label_agreement":null},{"id":"W4390509282","doi":"10.1089/3dp.2023.0177","title":"Laser Powder Bed Fusion of Stainless Steel 316L for Rectangular Micropillar Array with High Geometrical Accuracy and Hardness","year":2024,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Additive Manufacturing Materials and Processes","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Materials science; Laser; Fusion; Scanning electron microscope; Design for manufacturability; Composite material; Vickers hardness test; Optics; Microstructure; Mechanical engineering","score_opus":0.007605742978579566,"score_gpt":0.2104779593807208,"score_spread":0.20287221640214123,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4390509282","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98645496,0.000835965,0.011149341,0.00003663937,0.0003090282,0.0003599455,0.00037559308,0.00025213894,0.00022638535],"genre_scores_gemma":[0.99560064,0.00038371657,0.003458482,0.000017555201,0.00022734657,0.000050776136,0.000071413764,0.00007787877,0.000112182206],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99871874,0.00003131666,0.00028763124,0.00043405464,0.00016081386,0.0003674614],"domain_scores_gemma":[0.99905074,0.0005709303,0.000073250776,0.00014279199,0.00006869466,0.000093598275],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002180193,0.00032554136,0.0003953499,0.00023835452,0.00015861973,0.00020860782,0.000097549106,0.00010584109,0.000092671835],"category_scores_gemma":[0.00008361871,0.00025841102,0.000048608803,0.000118754055,0.00010208158,0.00022229385,0.00008678233,0.0001963572,0.0000023966631],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0003406225,0.000093122566,0.00038472423,0.013621827,0.0010807341,0.00014103844,0.0029368347,0.0014225708,0.19860573,0.000573351,0.00076994294,0.78002954],"study_design_scores_gemma":[0.00044627386,0.00009761383,0.0048761023,0.00074174383,0.000073735675,0.000024372855,0.000228306,0.00030729765,0.97467166,0.00026077652,0.017881144,0.0003909925],"about_ca_topic_score_codex":0.00002326367,"about_ca_topic_score_gemma":0.000004012587,"teacher_disagreement_score":0.7796385,"about_ca_system_score_codex":0.00003358856,"about_ca_system_score_gemma":0.00001868288,"threshold_uncertainty_score":0.9999868},"labels":[],"label_agreement":null},{"id":"W4394728464","doi":"10.1089/3dp.2023.0174","title":"Printing of Cantilevers and Millifluidic Devices Using Ultrasound Waves","year":2024,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Concordia University","funders":"","keywords":"Cantilever; Materials science; Acoustics; Ultrasound; Optoelectronics; Nanotechnology; Composite material; Physics","score_opus":0.013300538850384798,"score_gpt":0.22452144466396504,"score_spread":0.21122090581358025,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4394728464","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9902812,0.0020759604,0.0042876787,0.000019095567,0.00030603152,0.00016502378,0.000058548416,0.0011422628,0.0016641966],"genre_scores_gemma":[0.99233687,0.0007442625,0.006637339,0.000012720471,0.00012936021,0.000008953665,0.000009159678,0.00007193393,0.000049412352],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9983606,0.000036469093,0.00040811507,0.00051537005,0.00018641955,0.00049303315],"domain_scores_gemma":[0.9989626,0.0006181162,0.000082076156,0.00021886881,0.000030776882,0.000087567554],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0003177594,0.00039218023,0.0003925437,0.00035546522,0.00022579319,0.00019670783,0.00016653923,0.00014963698,0.000046175544],"category_scores_gemma":[0.00014036345,0.0003729009,0.000080958554,0.00013153923,0.000284619,0.00026883362,0.00026821613,0.00048529106,0.0000050769804],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012354653,0.000023286651,0.005377028,0.0038763306,0.00073104573,0.00010000022,0.0026000582,0.0022366825,0.045218926,0.001252564,0.00019966367,0.9383721],"study_design_scores_gemma":[0.00017197474,0.000027773109,0.034522887,0.0015411148,0.0000963498,0.00013167495,0.0009498578,0.010995975,0.94321704,0.00065033475,0.0070929374,0.0006020658],"about_ca_topic_score_codex":0.00008895968,"about_ca_topic_score_gemma":0.0000084877765,"teacher_disagreement_score":0.93777,"about_ca_system_score_codex":0.000051477713,"about_ca_system_score_gemma":0.000018951197,"threshold_uncertainty_score":0.99987227},"labels":[],"label_agreement":null},{"id":"W4402981838","doi":"10.1089/3dp.2023.0337","title":"Four-Dimensional Multistep Vertical Printing for Hygroresponsive Shape Change with Nonplanar Rest-State Geometries","year":2024,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Advanced Materials and Mechanics","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"","keywords":"Actuator; Rest (music); Kinematics; Planar; Mechanical engineering; Laminar flow; Materials science; 3D printing; Computer science; Composite number; Composite material; Engineering; Acoustics; Aerospace engineering; Computer graphics (images); Physics; Artificial intelligence","score_opus":0.021584981176042774,"score_gpt":0.23131225041986192,"score_spread":0.20972726924381915,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4402981838","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97262156,0.00032369135,0.025270306,0.000052136358,0.00047008405,0.00045328215,0.00015221792,0.000499566,0.000157174],"genre_scores_gemma":[0.9859437,0.00008481902,0.01327053,0.00005097574,0.00030459624,0.0001326694,0.00003281523,0.000084482344,0.00009543232],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.998744,0.000015661823,0.00022747376,0.00039318323,0.0001506736,0.00046899347],"domain_scores_gemma":[0.9992104,0.00048738997,0.000027370656,0.00011915664,0.000045646157,0.00011004113],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00020859826,0.00027398873,0.0002586366,0.00016907732,0.00018306178,0.00014959463,0.000071692724,0.00006746208,0.000040929117],"category_scores_gemma":[0.00009761019,0.0002326852,0.00004886021,0.0000736124,0.00004185285,0.00024336345,0.00010244659,0.00021506567,0.000012333544],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00048085363,0.000037442347,0.000112764974,0.0028634565,0.00051296846,0.00057404337,0.0017898629,0.006875707,0.05063457,0.00229798,0.000116394134,0.93370396],"study_design_scores_gemma":[0.0008000262,0.00019483785,0.007828003,0.0014514669,0.00008595242,0.00013993286,0.00013420229,0.10625685,0.85118794,0.0009839617,0.030133018,0.00080383476],"about_ca_topic_score_codex":0.000008802211,"about_ca_topic_score_gemma":0.000009173002,"teacher_disagreement_score":0.93290013,"about_ca_system_score_codex":0.000049058766,"about_ca_system_score_gemma":0.0000143069565,"threshold_uncertainty_score":0.94886273},"labels":[],"label_agreement":null},{"id":"W4408019320","doi":"10.1089/3dp.2024.0130","title":"Designing UV-Curable Resin-Made Polymeric Foams with Lattice Structures for Desired Stiffness via Machine Learning","year":2025,"lang":"en","type":"article","venue":"3D Printing and Additive Manufacturing","topic":"Polymer composites and self-healing","field":"Materials Science","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Regina","funders":"","keywords":"Materials science; Composite material; Stiffness; Lattice (music); Acoustics; Physics","score_opus":0.011422290615632344,"score_gpt":0.235044392217577,"score_spread":0.22362210160194465,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4408019320","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8284725,0.00079827587,0.16918917,0.00009246514,0.00019427456,0.00033557467,0.000024473933,0.00022747576,0.0006658097],"genre_scores_gemma":[0.96029854,0.000019314708,0.038788285,0.00013913983,0.0001141582,0.000042325544,0.00002695619,0.00003933317,0.0005319742],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9980707,0.00014232556,0.0003295314,0.00062332134,0.0001891236,0.0006449791],"domain_scores_gemma":[0.9986248,0.00078013964,0.00023135956,0.00019873178,0.000056321336,0.000108617925],"candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00038151836,0.00032697775,0.00038499804,0.00016558777,0.0011547386,0.00033668242,0.00022360873,0.000080926984,0.000060575516],"category_scores_gemma":[0.0001051568,0.00027497442,0.00005765275,0.00013060549,0.00011068911,0.00024065036,0.00017878402,0.00029071415,0.0000031570305],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00050812704,0.000042788703,0.0013883968,0.00052933634,0.00013556132,0.00002480156,0.0011165394,0.0035854003,0.79214287,0.0006718961,0.000017245025,0.19983706],"study_design_scores_gemma":[0.0007897438,0.00007890142,0.0069309967,0.00037417648,0.00009220797,0.000022261645,0.00025743037,0.006993315,0.9827803,0.00060587213,0.0007027642,0.0003720803],"about_ca_topic_score_codex":0.000370803,"about_ca_topic_score_gemma":0.000017312483,"teacher_disagreement_score":0.19946498,"about_ca_system_score_codex":0.000048411217,"about_ca_system_score_gemma":0.00005042439,"threshold_uncertainty_score":0.99997026},"labels":[],"label_agreement":null}]}