{"meta":{"query_hash":"9a90c165c28e","filters":{"venue":"CIRP journal of manufacturing science and technology"},"cohort_total":46,"direct_labels_cover":0,"predictions_cover":46,"exported":46,"export_cap":100000,"truncated":false,"label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"permalink":"https://metacan.xera.ac/q/9a90c165c28e","api":"https://metacan.xera.ac/api/v1/cohort?venue=CIRP+journal+of+manufacturing+science+and+technology"},"results":[{"id":"W1070785770","doi":"10.1016/j.cirpj.2015.05.006","title":"Modeling and scheduling a flexible manufacturing cell with parallel processing capability","year":2015,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Scheduling and Optimization Algorithms","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Scheduling (production processes); Computer science; Distributed computing; Manufacturing engineering; Engineering; Operations management","score_opus":0.014846747365592298,"score_gpt":0.22501935470344026,"score_spread":0.21017260733784796,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1070785770","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8923129,0.0013605475,0.10562215,0.0002105075,0.00010337402,0.000063460684,2.8693023e-7,0.00015603597,0.00017076249],"genre_scores_gemma":[0.8706519,0.000077284254,0.12919284,0.000015833806,0.000038383863,0.0000019606382,1.2737546e-7,0.000015318801,0.0000063516663],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99874943,0.000008289925,0.00030499665,0.00023333136,0.00036129568,0.00034265654],"domain_scores_gemma":[0.9992437,0.000015916821,0.000100574456,0.0001590125,0.0002686118,0.00021218807],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00086294825,0.00016870932,0.00024835975,0.0006185573,0.00021481769,0.00015942809,0.0002828651,0.00010794718,0.0000013662984],"category_scores_gemma":[0.00007533624,0.00013531675,0.00001560496,0.00029060547,0.00040206566,0.0006165796,0.000073791474,0.00042171558,8.535306e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000017513064,0.000015984268,0.00040908117,0.00008435235,0.000009932545,0.000020130045,0.00045352223,0.9655856,0.00067671924,0.000024068435,0.000001722265,0.032701377],"study_design_scores_gemma":[0.0010133965,0.00015587627,0.00014075892,0.0001562163,0.000029715653,0.0008371022,0.002480242,0.75748503,0.23552553,0.0018490831,0.00004019767,0.00028685638],"about_ca_topic_score_codex":0.000004096228,"about_ca_topic_score_gemma":0.0000015763518,"teacher_disagreement_score":0.23484883,"about_ca_system_score_codex":0.00009133221,"about_ca_system_score_gemma":0.00017435271,"threshold_uncertainty_score":0.5518057},"labels":[],"label_agreement":null},{"id":"W1874907880","doi":"10.1016/j.cirpj.2015.09.004","title":"Product family formation by matching Bill-of-Materials trees","year":2015,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Product Development and Customization","field":"Business, Management and Accounting","cited_by":35,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Similarity (geometry); Product (mathematics); Matching (statistics); Tree (set theory); Component (thermodynamics); Field (mathematics); Computer science; Process (computing); Cluster analysis; Hierarchical clustering; Variety (cybernetics); Tree structure; Industrial engineering; Engineering; Mathematics; Artificial intelligence; Algorithm; Binary tree; Combinatorics","score_opus":0.0155105967496475,"score_gpt":0.21444738192976479,"score_spread":0.1989367851801173,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1874907880","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9963432,0.00023281923,0.00040230807,0.0021488145,0.00041369197,0.00007875582,3.619698e-7,0.000032727523,0.00034731277],"genre_scores_gemma":[0.99926305,0.000030689822,0.00044343274,0.00009204302,0.00014643866,0.0000011643206,0.0000013892192,0.0000051881498,0.000016623155],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99900603,0.00000404241,0.0003380405,0.00013236553,0.00035031015,0.00016918175],"domain_scores_gemma":[0.9988985,0.000006023612,0.0005366534,0.00011055859,0.00043481714,0.000013416822],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0014749491,0.00008607267,0.0001761289,0.00084423,0.00012923034,0.00014106104,0.00033865118,0.00004072699,0.0000034736092],"category_scores_gemma":[0.00029574864,0.000059481332,0.000011554197,0.00047678285,0.00022163229,0.0023703072,0.00012538006,0.00008242002,0.0000055037144],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00007278591,0.000080203434,0.0026233473,0.00014267697,0.000023797578,0.00001020442,0.00043677448,0.00011204522,0.8794273,0.0028923904,0.00763786,0.10654063],"study_design_scores_gemma":[0.00039732576,0.000025188197,0.0022686836,0.000063505766,0.00001741784,0.00003943247,0.00074589445,0.00002042966,0.96818686,0.021016885,0.0071010604,0.00011734925],"about_ca_topic_score_codex":0.000020171454,"about_ca_topic_score_gemma":0.0000013427145,"teacher_disagreement_score":0.10642328,"about_ca_system_score_codex":0.00003469601,"about_ca_system_score_gemma":0.000073519564,"threshold_uncertainty_score":0.24255784},"labels":[],"label_agreement":null},{"id":"W1977733940","doi":"10.1016/j.cirpj.2010.06.004","title":"A periodicity metric for assessing maintenance strategies","year":2010,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Reliability and Maintenance Optimization","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Metric (unit); Reset (finance); Computer science; Function (biology); Reliability engineering; Domain (mathematical analysis); Mathematical optimization; Engineering; Mathematics; Operations management","score_opus":0.0060018091268388895,"score_gpt":0.23334477185404576,"score_spread":0.22734296272720686,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1977733940","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9331719,0.000105057174,0.065303564,0.0004339222,0.0004941504,0.000075368174,6.331193e-7,0.00006238894,0.00035296782],"genre_scores_gemma":[0.98460746,0.00009479037,0.015228558,0.000014664132,0.000039282717,0.0000031149077,8.777869e-8,0.0000063604716,0.0000056596373],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99927306,0.0000028443765,0.00021017401,0.00011795112,0.00015153622,0.00024441065],"domain_scores_gemma":[0.99937946,0.000042525884,0.00009730038,0.00012892055,0.00029965953,0.000052156254],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00079299475,0.000082552855,0.00015668046,0.00061227405,0.00018509252,0.00018179009,0.00029606768,0.00009593775,0.000003581131],"category_scores_gemma":[0.00049232383,0.00006594904,0.000026427235,0.00040439123,0.0006281517,0.0008162395,0.000029229988,0.00033874175,3.9298573e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003376676,0.00008827741,0.0024306495,0.00045956456,0.0000598226,0.000038304926,0.00075828965,0.039802905,0.4578653,0.027618114,0.0006014016,0.4702436],"study_design_scores_gemma":[0.0011828679,0.00029574742,0.01761009,0.00016955138,0.000048048303,0.0010056071,0.0037786015,0.034427926,0.86718625,0.06522597,0.008589332,0.00048004332],"about_ca_topic_score_codex":0.0000011641516,"about_ca_topic_score_gemma":0.0000034568543,"teacher_disagreement_score":0.46976358,"about_ca_system_score_codex":0.000041583302,"about_ca_system_score_gemma":0.00012491943,"threshold_uncertainty_score":0.26893237},"labels":[],"label_agreement":null},{"id":"W1994736107","doi":"10.1016/j.cirpj.2014.05.001","title":"Modeling and active damping of structural vibrations in machine tools","year":2014,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Iterative Learning Control Systems","field":"Engineering","cited_by":29,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Vibration; Control theory (sociology); Bandwidth (computing); Machine tool; Vibration control; Engineering; Servomechanism; Control engineering; Controller (irrigation); Servomotor; Active vibration control; Computer science; Control (management); Physics; Mechanical engineering; Acoustics; Artificial intelligence","score_opus":0.007240650223422633,"score_gpt":0.21943202343809412,"score_spread":0.2121913732146715,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W1994736107","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9879562,0.0002679037,0.01132613,0.00016576207,0.00009499923,0.00004759366,6.8788665e-7,0.000020390718,0.00012032607],"genre_scores_gemma":[0.9990721,0.000014054726,0.00087928266,0.0000058447163,0.000021616977,8.017979e-7,9.909497e-8,0.000005013413,0.0000012249455],"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.999355,0.000015828005,0.00025264375,0.00009355628,0.00013365186,0.00014931399],"domain_scores_gemma":[0.9996643,0.000055414304,0.00008471149,0.00008174954,0.0000831108,0.000030715044],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00046340626,0.00007407923,0.00020084379,0.00065653876,0.00007790011,0.000044165536,0.00016372462,0.000053978405,0.0000011680795],"category_scores_gemma":[0.00026347817,0.00006276716,0.000011425714,0.00018893965,0.00019010686,0.00046443514,0.000040103336,0.00027165466,1.3288265e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000023269102,0.000009028417,0.007906336,0.00012225701,0.000042503838,0.000012285422,0.0022187647,0.35470727,0.3656386,0.0040149065,0.0000015555349,0.26530322],"study_design_scores_gemma":[0.00062327675,0.0001216238,0.014626083,0.00017641037,0.000008754855,0.00021564888,0.00047251827,0.80203795,0.17796884,0.0035751588,0.000040083367,0.00013363577],"about_ca_topic_score_codex":0.00000604613,"about_ca_topic_score_gemma":0.00001000629,"teacher_disagreement_score":0.44733068,"about_ca_system_score_codex":0.00004369568,"about_ca_system_score_gemma":0.000023340372,"threshold_uncertainty_score":0.25595704},"labels":[],"label_agreement":null},{"id":"W2005324271","doi":"10.1016/j.cirpj.2012.10.006","title":"Multi-criteria decision support for sustainability assessment of manufacturing system reuse","year":2012,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Sustainable Supply Chain Management","field":"Business, Management and Accounting","cited_by":67,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Reuse; Sustainability; Environmental economics; Decision support system; Business; Risk analysis (engineering); Engineering; Computer science; Economics; Waste management","score_opus":0.015344700133381328,"score_gpt":0.29117380533386467,"score_spread":0.2758291052004833,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2005324271","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98344344,0.00009289663,0.013684537,0.0010422278,0.0007931225,0.0005752847,0.000001435548,0.00007320835,0.00029384412],"genre_scores_gemma":[0.98290414,0.00001014876,0.016671978,0.000078680976,0.00025908437,0.000019120469,9.093624e-7,0.000020022926,0.000035910078],"study_design_codex":"design_other","study_design_gemma":"observational","domain_scores_codex":[0.997522,0.000012648859,0.00075237494,0.00032973036,0.000629278,0.0007539592],"domain_scores_gemma":[0.9972309,0.00011381254,0.0008926537,0.00062230625,0.0010865236,0.000053788717],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0051242677,0.00022784556,0.00046320504,0.002173674,0.00039870862,0.00019933528,0.0012369782,0.00012501335,0.000021558095],"category_scores_gemma":[0.0012037518,0.00019148026,0.00009327508,0.0005131712,0.00055224606,0.002113792,0.001023992,0.00024901933,0.0000018673262],"study_design_candidate":"observational","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0008467595,0.0026781438,0.2621793,0.022788895,0.0005786097,0.0004958507,0.0012375541,0.0017588915,0.02303411,0.09437879,0.0056442153,0.5843789],"study_design_scores_gemma":[0.009738377,0.0007637283,0.4076717,0.0010849666,0.00075772434,0.00057757023,0.057660457,0.009994768,0.3542409,0.050574582,0.1050107,0.0019245556],"about_ca_topic_score_codex":0.000025781512,"about_ca_topic_score_gemma":0.000002403869,"teacher_disagreement_score":0.5824543,"about_ca_system_score_codex":0.00053761096,"about_ca_system_score_gemma":0.00018319034,"threshold_uncertainty_score":0.78083384},"labels":[],"label_agreement":null},{"id":"W2027824825","doi":"10.1016/j.cirpj.2012.03.006","title":"Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes","year":2012,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; Université Laval; Alcoa (Canada)","funders":"National Research Council Canada; Natural Sciences and Engineering Research Council of Canada; Université Laval","keywords":"Mandrel; Aluminium; Die (integrated circuit); Tube (container); Mechanical engineering; Engineering; Point (geometry); Variable (mathematics); Sizing; Structural engineering; Engineering drawing; Materials science; Composite material; Geometry; Mathematics","score_opus":0.010086008585137638,"score_gpt":0.24529378153191375,"score_spread":0.2352077729467761,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2027824825","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.58896786,0.00045200696,0.4101898,0.0000720386,0.000085834596,0.0001592541,8.680905e-7,0.00002725404,0.000045079938],"genre_scores_gemma":[0.96449846,0.00004651575,0.035412714,0.0000033905983,0.000024832832,0.0000038827707,1.7002291e-7,0.000006085831,0.000003975857],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99930596,0.000003448215,0.00033236822,0.00005611135,0.0001780534,0.00012406881],"domain_scores_gemma":[0.9993068,0.00007655408,0.0002163408,0.00013884754,0.00023500963,0.000026471265],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008735072,0.000059948117,0.00016999397,0.000350456,0.000053787553,0.000006320436,0.00028471282,0.000078055076,0.0000022096706],"category_scores_gemma":[0.00023409215,0.00004360314,0.000022643553,0.00033299666,0.00023533324,0.00032973505,0.00003250651,0.00009488901,4.3213472e-8],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00003982801,0.000079878846,0.005327636,0.0010294341,0.00009605043,1.4507008e-7,0.0013989183,0.21573605,0.65227294,0.027887043,0.00010389959,0.09602817],"study_design_scores_gemma":[0.00012607109,0.000054935328,0.000851805,0.00006433751,0.000028428083,0.00002537998,0.00014555265,0.019173138,0.97581553,0.0034971181,0.00017533201,0.000042339],"about_ca_topic_score_codex":0.0000036927736,"about_ca_topic_score_gemma":1.5602647e-7,"teacher_disagreement_score":0.37553057,"about_ca_system_score_codex":0.000018619561,"about_ca_system_score_gemma":0.0000632843,"threshold_uncertainty_score":0.17780845},"labels":[],"label_agreement":null},{"id":"W2042658032","doi":"10.1016/j.cirpj.2012.12.002","title":"Mechanics of change: A framework to reconfigure manufacturing systems","year":2013,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Flexible and Reconfigurable Manufacturing Systems","field":"Engineering","cited_by":70,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Control reconfiguration; Reconfigurability; Flexibility (engineering); Controller (irrigation); Sustainability; Supply chain; Control system; Computer science; Control (management); Engineering; Control engineering; Embedded system; Business; Artificial intelligence; Economics","score_opus":0.01919170904178728,"score_gpt":0.22567116527349157,"score_spread":0.2064794562317043,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2042658032","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9920552,0.0015636451,0.002497283,0.00063035684,0.0019743794,0.00047232874,0.0000030829274,0.00016195662,0.0006417778],"genre_scores_gemma":[0.9983617,0.00028982488,0.0009930498,0.000050069095,0.00019549386,0.00003134471,1.8443926e-7,0.000032146243,0.00004615899],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9978355,0.000019383326,0.0007431773,0.00028572584,0.00051966537,0.0005965603],"domain_scores_gemma":[0.9985076,0.00008113112,0.00040316326,0.0004425492,0.0003088472,0.00025666575],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00081686536,0.0002749918,0.0006068337,0.0018309249,0.00015882037,0.0001530373,0.0009054334,0.00030615827,0.00004112562],"category_scores_gemma":[0.00015331082,0.00022580099,0.00006708417,0.00048970233,0.00021810493,0.00060055224,0.000111503476,0.0006061399,0.000032510714],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000057963487,0.00017202043,0.0007339947,0.0038839153,0.0006489188,0.00021172226,0.0041261245,0.03066316,0.23261514,0.011020022,0.003763351,0.71210366],"study_design_scores_gemma":[0.0002495713,0.0002716288,0.0013267584,0.00087984855,0.000026889664,0.0006414709,0.0011298695,0.0008774744,0.98427624,0.0054602437,0.004513319,0.00034666684],"about_ca_topic_score_codex":0.00004973142,"about_ca_topic_score_gemma":0.000002082042,"teacher_disagreement_score":0.7516611,"about_ca_system_score_codex":0.00012668913,"about_ca_system_score_gemma":0.00006312583,"threshold_uncertainty_score":0.9207897},"labels":[],"label_agreement":null},{"id":"W2043916816","doi":"10.1016/j.cirpj.2013.04.001","title":"On the micro and nanoparticle emission during machining of titanium and aluminum alloys","year":2013,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Materials science; Titanium alloy; Aluminium; Titanium; Machining; Metallurgy; Alloy; Thermal; Particle (ecology); Geology","score_opus":0.004010297812765337,"score_gpt":0.19460770115906095,"score_spread":0.1905974033462956,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2043916816","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99841475,0.0004516811,0.00042753693,0.00049816904,0.00006092047,0.000043706397,2.0864246e-7,0.00002252446,0.000080494145],"genre_scores_gemma":[0.99829006,0.00027568938,0.0013927097,0.000016312886,0.000010259094,0.0000010265892,2.5297844e-8,0.0000058560076,0.0000080599075],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9995148,0.0000040898135,0.00015137687,0.00008796681,0.000106293344,0.00013546017],"domain_scores_gemma":[0.9996971,0.00004264923,0.000083232786,0.00007584446,0.000058948022,0.000042250762],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00020645405,0.00006757385,0.00010292716,0.00017424938,0.00015546699,0.000037771246,0.00012550634,0.00003915045,0.000004793148],"category_scores_gemma":[0.00010122131,0.000045326833,0.0000069920593,0.0001177338,0.00027600245,0.00024459348,0.000060800056,0.00016154708,3.0623406e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000008842919,0.0000103527345,0.0016949434,0.00008362123,0.0000122586225,0.000003847999,0.0003343679,0.0037544984,0.96432877,0.0006332758,0.00003115085,0.02910405],"study_design_scores_gemma":[0.00019159786,0.000081140635,0.0054401117,0.00009265042,0.000006528288,0.00015147634,0.00033095415,0.0032003617,0.9871346,0.0032642556,0.00004116032,0.00006516945],"about_ca_topic_score_codex":0.0000013724676,"about_ca_topic_score_gemma":2.684757e-7,"teacher_disagreement_score":0.029038882,"about_ca_system_score_codex":0.000012813896,"about_ca_system_score_gemma":0.000010751135,"threshold_uncertainty_score":0.18483746},"labels":[],"label_agreement":null},{"id":"W2083387274","doi":"10.1016/j.cirpj.2008.06.003","title":"Chatter stability of milling in frequency and discrete time domain","year":2008,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":317,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Discretization; Stability (learning theory); Machining; Frequency domain; Control theory (sociology); Time domain; Process (computing); Harmonics; Domain (mathematical analysis); Engineering; Computer science; Mechanical engineering; Mathematics; Mathematical analysis; Artificial intelligence","score_opus":0.006311199253750427,"score_gpt":0.2059932831517132,"score_spread":0.19968208389796277,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2083387274","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99231917,0.00068597816,0.006637236,0.00015294214,0.000038095928,0.000030681666,5.8723475e-7,0.000017988797,0.00011734601],"genre_scores_gemma":[0.9881364,0.00047015666,0.011373789,0.0000061273554,0.000007663563,4.8722194e-7,7.9643684e-8,0.0000043455807,9.3612925e-7],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99944395,0.0000038275334,0.0002122365,0.0000924105,0.00011187303,0.00013571848],"domain_scores_gemma":[0.99973863,0.000020251317,0.00007980402,0.000074910306,0.00005593678,0.000030459205],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00028981586,0.0000624114,0.00014876538,0.00034848106,0.00006535994,0.0000070340857,0.00012918183,0.000047794863,0.000004118176],"category_scores_gemma":[0.00005906411,0.00005270545,0.000008845928,0.00020836931,0.00044901777,0.00028831392,0.00003248655,0.00016444705,1.8190222e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00007121371,0.00011188369,0.15583965,0.0008360703,0.000062723826,0.0002596342,0.0072333985,0.053688228,0.6800799,0.0019163778,0.000021053407,0.099879876],"study_design_scores_gemma":[0.00091475,0.0002924287,0.029133573,0.00023911637,0.000011080523,0.00078957685,0.0005035119,0.005250724,0.9270836,0.03539337,0.00009367003,0.00029457227],"about_ca_topic_score_codex":0.0000015798836,"about_ca_topic_score_gemma":0.0000013004327,"teacher_disagreement_score":0.24700375,"about_ca_system_score_codex":0.000026472726,"about_ca_system_score_gemma":0.000025366542,"threshold_uncertainty_score":0.2149266},"labels":[],"label_agreement":null},{"id":"W2304786101","doi":"10.1016/j.cirpj.2016.02.005","title":"Receptance coupling based algorithm for the identification of contact parameters at holder–tool interface","year":2016,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":35,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Interface (matter); Coupling (piping); Frequency response; Machine tool; Stability (learning theory); Substructure; Engineering; Position (finance); Vibration; Control theory (sociology); Algorithm; Computer science; Mechanical engineering; Structural engineering; Acoustics; Artificial intelligence; Physics","score_opus":0.00877426307148852,"score_gpt":0.2386599152504525,"score_spread":0.22988565217896398,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2304786101","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.3448497,0.0005378944,0.65404487,0.00029922152,0.00017633222,0.00006490127,0.0000021681162,0.00002281043,0.0000021036792],"genre_scores_gemma":[0.98061097,0.00044853744,0.018900972,0.0000078788735,0.000010699461,0.000004511113,9.377456e-8,0.000007361015,0.000008983045],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99934626,0.0000019298557,0.00028210404,0.00010165,0.00013125029,0.00013680966],"domain_scores_gemma":[0.9992795,0.00015867033,0.00024305162,0.00012536773,0.00017396541,0.000019440762],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00051031576,0.0000678882,0.000116970776,0.00019186581,0.00012909845,0.000020409794,0.00027358098,0.000044861685,0.0000019906797],"category_scores_gemma":[0.00019271563,0.000040862516,0.000021439972,0.00014907203,0.00024874904,0.000242463,0.000025958256,0.00007870786,3.2022402e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000016102063,0.000007361599,0.0001060455,0.000042327076,0.000017696451,7.247235e-7,0.00004720013,0.08860169,0.18635145,0.00008186009,0.00001909304,0.72470844],"study_design_scores_gemma":[0.00029999297,0.0000644915,0.00029861083,0.00008224288,0.0000128971,0.000016882199,0.000058461836,0.13836253,0.85987395,0.0005660759,0.00030695312,0.000056899113],"about_ca_topic_score_codex":2.5611098e-7,"about_ca_topic_score_gemma":5.184321e-7,"teacher_disagreement_score":0.7246516,"about_ca_system_score_codex":0.00005557045,"about_ca_system_score_gemma":0.000027172215,"threshold_uncertainty_score":0.1666325},"labels":[],"label_agreement":null},{"id":"W2531578507","doi":"10.1016/j.cirpj.2016.09.003","title":"2-DOF dynamic model of vibro-compactor used for the carbon anodes block production","year":2016,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Fiber-reinforced polymer composites","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Aluminerie Alouette (Canada); Université du Québec à Chicoutimi","funders":"Canada Economic Development for Quebec Regions; National Science and Technology Entrepreneurship Development Board; Foundation of the American College of Allergy, Asthma & Immunology","keywords":"Acceleration; Anode; Vibration; Rigidity (electromagnetism); Compaction; Earthquake shaking table; Block (permutation group theory); Dynamic compaction; Engineering; Structural engineering; Mechanical engineering; Materials science; Electrode; Physics; Acoustics; Mathematics; Geotechnical engineering","score_opus":0.007876605619746414,"score_gpt":0.21077263731756313,"score_spread":0.20289603169781673,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2531578507","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9946236,0.000461556,0.00322112,0.0012328831,0.0002678148,0.000108943525,0.000002218146,0.00005438009,0.000027500022],"genre_scores_gemma":[0.9989471,0.00007794856,0.0008976864,0.000004198059,0.000025849777,0.0000043423756,3.545057e-8,0.000010470332,0.000032382228],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9992056,0.0000035228643,0.00025066678,0.00011317525,0.00020170948,0.00022531931],"domain_scores_gemma":[0.99938977,0.00008085148,0.00014270497,0.0002251342,0.00012482257,0.00003674738],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00030882464,0.00010182407,0.00017481965,0.00046227698,0.00009187967,0.000018182192,0.00042910597,0.00006445987,8.909238e-7],"category_scores_gemma":[0.00009482005,0.000058395945,0.000034196488,0.0001790669,0.00052667235,0.00022635638,0.000044166634,0.00012228775,2.2767762e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000008858021,0.000004520556,0.000111753056,0.00002717585,0.000021889102,4.188487e-7,0.00008344193,0.017948149,0.9712952,0.00008728843,0.00001492795,0.010396404],"study_design_scores_gemma":[0.00022522251,0.000079451966,0.0003074262,0.0000689958,0.000021349633,0.00007782324,0.000045484565,0.049170386,0.94857603,0.0013041922,0.00004881424,0.000074806565],"about_ca_topic_score_codex":0.00000182395,"about_ca_topic_score_gemma":0.0000025465658,"teacher_disagreement_score":0.031222237,"about_ca_system_score_codex":0.00006971103,"about_ca_system_score_gemma":0.0000562408,"threshold_uncertainty_score":0.23813176},"labels":[],"label_agreement":null},{"id":"W2803773846","doi":"10.1016/j.cirpj.2018.05.001","title":"Methodology for reconfigurable fixture architecture design","year":2018,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Product Development and Customization","field":"Business, Management and Accounting","cited_by":43,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Windsor","funders":"","keywords":"Fixture; Computer science; Product design; Architecture; Modular design; Product (mathematics); Configuration design; Resource (disambiguation); Embedded system; Engineering; Systems engineering; Manufacturing engineering; Reliability engineering; Mechanical engineering","score_opus":0.041337613935135596,"score_gpt":0.25886558578039365,"score_spread":0.21752797184525804,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2803773846","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.78271013,0.0003646026,0.19364777,0.018214276,0.0018771184,0.00045192943,5.238504e-7,0.00013152043,0.0026021],"genre_scores_gemma":[0.9682025,0.000015833275,0.030212458,0.00065292337,0.0007948781,0.00000463581,4.2619092e-7,0.000009498647,0.000106853746],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9990873,0.000008206468,0.00023461285,0.00021385036,0.00017415482,0.00028190354],"domain_scores_gemma":[0.99882364,0.000060217422,0.00034042742,0.00013216482,0.0006299047,0.000013660316],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0022594107,0.00010474172,0.00019466614,0.0011008611,0.00039323478,0.00012676486,0.00046561743,0.00010237923,0.00003079326],"category_scores_gemma":[0.0011054238,0.00008034839,0.000023736175,0.0005420954,0.0005991422,0.0006612551,0.00006709492,0.00016773627,0.000007994822],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00032285717,0.00005483195,0.0011300027,0.00015703357,0.00006829942,0.000018613802,0.0002996465,0.00012444131,0.111295275,0.018616406,0.011257164,0.8566554],"study_design_scores_gemma":[0.0006818896,0.00013451099,0.001179871,0.000056045672,0.000044818767,0.00018440686,0.00022504295,0.0001666282,0.6767473,0.21438244,0.1059848,0.00021219211],"about_ca_topic_score_codex":0.0000019980982,"about_ca_topic_score_gemma":0.0000023637258,"teacher_disagreement_score":0.8564432,"about_ca_system_score_codex":0.000025238662,"about_ca_system_score_gemma":0.00010603439,"threshold_uncertainty_score":0.32765123},"labels":[],"label_agreement":null},{"id":"W2995871999","doi":"10.1016/j.cirpj.2019.11.006","title":"Chatter stability of synchronized elliptical vibration assisted milling","year":2019,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":37,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Vibration; Actuator; Ultrasonic sensor; Materials science; Acoustics; Amplitude; Time domain; Chip; Mechanical engineering; Engineering; Physics; Optics; Computer science","score_opus":0.006629968285562995,"score_gpt":0.2136508044791858,"score_spread":0.2070208361936228,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W2995871999","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.94594836,0.00024343381,0.053254355,0.00015968134,0.00017633676,0.000049485876,3.9519708e-7,0.000035062993,0.00013286113],"genre_scores_gemma":[0.99231195,0.00010450755,0.0075504677,0.000009880392,0.000014789669,4.88547e-7,1.9603559e-7,0.0000057458064,0.0000019865386],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9993276,0.000004377356,0.00024877183,0.00010117661,0.00017772746,0.00014035686],"domain_scores_gemma":[0.9995498,0.000031626452,0.000117205185,0.000111675574,0.0001567041,0.00003295804],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00033892784,0.00006757144,0.00016693314,0.00028761316,0.000048800215,0.000019704137,0.00016995182,0.000066876244,0.000018660261],"category_scores_gemma":[0.00008494229,0.00005684883,0.000016965023,0.0002284928,0.0002103296,0.0003454354,0.000031194868,0.00017740192,0.0000011648585],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000051708437,0.000062000116,0.006757722,0.00057129684,0.000046442918,0.000009118486,0.0004199049,0.10266918,0.7385072,0.0010918354,0.000010548962,0.14980304],"study_design_scores_gemma":[0.00036216236,0.00014319239,0.00272009,0.00007983865,0.000011405003,0.000066895416,0.00015021775,0.023092268,0.9719349,0.00122559,0.0001206443,0.00009280905],"about_ca_topic_score_codex":3.238468e-7,"about_ca_topic_score_gemma":3.5232006e-7,"teacher_disagreement_score":0.23342769,"about_ca_system_score_codex":0.00004419365,"about_ca_system_score_gemma":0.00004216509,"threshold_uncertainty_score":0.23182279},"labels":[],"label_agreement":null},{"id":"W3181851684","doi":"10.1016/j.cirpj.2021.06.019","title":"Experimental comparison of different automatically tuned control strategies for active vibration control","year":2021,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":17,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Bayerisches Staatsministerium für Wissenschaft, Forschung und Kunst; Bayerisches Staatsministerium für Bildung und Kultus, Wissenschaft und Kunst; University of Waterloo","keywords":"Controller (irrigation); Control theory (sociology); Vibration; Particle swarm optimization; Engineering; Control engineering; Vibration control; Mode (computer interface); Machine tool; Computer science; Control (management); Mechanical engineering; Artificial intelligence; Acoustics; Algorithm","score_opus":0.007682525848317643,"score_gpt":0.2654782178958026,"score_spread":0.257795692047485,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3181851684","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.6185141,0.00031160258,0.38081136,0.00013478115,0.00009638406,0.00006197133,0.0000019016946,0.000029279357,0.00003858154],"genre_scores_gemma":[0.9951907,0.000017372151,0.004751541,0.0000127184085,0.000015651787,0.0000047609306,4.808495e-7,0.000005801783,9.963035e-7],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9993632,0.0000055305372,0.00026444704,0.00008911359,0.00014474693,0.00013298086],"domain_scores_gemma":[0.99946845,0.00006423643,0.0001527481,0.000066841385,0.0002142845,0.000033472457],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000098896504,0.00007866044,0.00024202242,0.00017411169,0.000088437126,0.000041036008,0.00012366482,0.00005572071,0.0000040551863],"category_scores_gemma":[0.00008794343,0.00006564141,0.000023743916,0.00010346189,0.00018656997,0.0003436676,0.000014463236,0.00011108543,7.077502e-8],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008908137,0.00011442432,0.000246833,0.00013620975,0.00007439215,0.0000050827507,0.000648184,0.12418778,0.83315545,0.0055899573,0.00001069483,0.03574192],"study_design_scores_gemma":[0.0009874101,0.00022252927,0.00076958234,0.000039425722,0.000020366671,0.000024953824,0.0017483808,0.06178156,0.9310582,0.0032662796,0.000016457405,0.00006480772],"about_ca_topic_score_codex":1.4731955e-7,"about_ca_topic_score_gemma":6.853147e-7,"teacher_disagreement_score":0.37667656,"about_ca_system_score_codex":0.000038034057,"about_ca_system_score_gemma":0.000075986645,"threshold_uncertainty_score":0.2676779},"labels":[],"label_agreement":null},{"id":"W3210436978","doi":"10.1016/j.cirpj.2021.10.001","title":"Modelling and indirect measurement of machine tool equivalent joint compliances","year":2021,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Measurement and Metrology Techniques","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada; Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada; VINNOVA","keywords":"Kinematics; Jacobian matrix and determinant; Stiffness; Position (finance); Displacement (psychology); Angular displacement; Machine tool; Orientation (vector space); Mathematics; Joint (building); Simulation; Structural engineering; Control theory (sociology); Computer science; Engineering; Geometry; Physics; Mechanical engineering; Applied mathematics; Classical mechanics; Artificial intelligence","score_opus":0.0446339888279951,"score_gpt":0.2426247892294795,"score_spread":0.1979908004014844,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3210436978","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.942662,0.007312506,0.04926131,0.00027034208,0.00015186603,0.000054054468,8.8306734e-7,0.00006257395,0.00022447376],"genre_scores_gemma":[0.9861977,0.0017879539,0.011974798,0.00001314655,0.00001498352,0.0000015685604,7.9907586e-8,0.0000064677247,0.000003281201],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9989423,0.000009552165,0.00031944443,0.00013902222,0.00038026116,0.00020942211],"domain_scores_gemma":[0.99934226,0.000013504212,0.00013534735,0.0001308599,0.00033051654,0.00004753136],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010003713,0.000104675986,0.00028457865,0.00047372087,0.00008651519,0.000016725353,0.00016611969,0.00006655545,0.000003826209],"category_scores_gemma":[0.000099707024,0.00009019661,0.000025695703,0.00021956654,0.0003884679,0.00019589251,0.00007370857,0.0002439415,1.5783479e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000021893098,0.00006528246,0.0037310687,0.0002886071,0.00012512486,0.00008145129,0.00017096999,0.01805004,0.8108224,0.0008373628,0.00006569598,0.16574006],"study_design_scores_gemma":[0.00023520715,0.000098841505,0.00088066515,0.00013674906,0.00002276046,0.00021271105,0.000074683034,0.0018780779,0.99062556,0.0050929007,0.0006496134,0.00009225794],"about_ca_topic_score_codex":8.0476616e-7,"about_ca_topic_score_gemma":0.0000015183177,"teacher_disagreement_score":0.17980309,"about_ca_system_score_codex":0.00006953756,"about_ca_system_score_gemma":0.00006475305,"threshold_uncertainty_score":0.3678111},"labels":[],"label_agreement":null},{"id":"W3216255475","doi":"10.1016/j.cirpj.2021.11.003","title":"Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem","year":2021,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Laser and Thermal Forming Techniques","field":"Engineering","cited_by":22,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada; Canada Research Chairs","keywords":"Peening; Shot peening; Curvature; Fuselage; Inverse; Structural engineering; Saddle; Shot (pellet); Sheet metal; Process (computing); Plane (geometry); Materials science; Mechanics; Engineering; Geometry; Computer science; Mathematics; Physics; Composite material; Residual stress; Metallurgy","score_opus":0.010433447406324098,"score_gpt":0.223312639063015,"score_spread":0.2128791916566909,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W3216255475","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96051615,0.00021047506,0.036264706,0.0020849877,0.000110030116,0.00010393336,0.0000017345781,0.00011783597,0.00059013726],"genre_scores_gemma":[0.98647684,0.0001431293,0.013193813,0.00012946773,0.000032256245,0.000003221401,2.7761098e-7,0.000009375427,0.0000115916255],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9992446,0.000007966847,0.00020200641,0.00013204163,0.00018732712,0.00022607362],"domain_scores_gemma":[0.999615,0.000025715422,0.00005393216,0.00011551788,0.00011147176,0.00007834038],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00042727476,0.0000976267,0.00014363977,0.00027115335,0.00019022962,0.000080880985,0.00029550536,0.000075433265,0.00001026944],"category_scores_gemma":[0.00006346223,0.00006849215,0.000019832447,0.00028749215,0.00019810899,0.00032180664,0.00017006202,0.00027000133,9.659655e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000057721016,0.00012945662,0.0053612934,0.00034389782,0.00018612573,0.0005218408,0.0052456,0.116595544,0.081612065,0.0018271175,0.0014875752,0.78663176],"study_design_scores_gemma":[0.00042246073,0.00037108143,0.0013473254,0.00020660575,0.000038231934,0.001828316,0.00096881523,0.033476114,0.9434376,0.012370393,0.0051901443,0.00034296254],"about_ca_topic_score_codex":0.000002281689,"about_ca_topic_score_gemma":0.0000066294556,"teacher_disagreement_score":0.86182547,"about_ca_system_score_codex":0.000045986042,"about_ca_system_score_gemma":0.000046576773,"threshold_uncertainty_score":0.27930287},"labels":[],"label_agreement":null},{"id":"W4205263895","doi":"10.1016/j.cirpj.2021.12.009","title":"Deep learning LSTM for predicting thermally induced geometric errors using rotary axes’ powers as input parameters","year":2022,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Measurement and Metrology Techniques","field":"Engineering","cited_by":34,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Artificial intelligence; Control theory (sociology); Computer science; Deep learning; Computer vision; Engineering","score_opus":0.018881995999506223,"score_gpt":0.25041430971665146,"score_spread":0.23153231371714525,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4205263895","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9778857,0.00067948573,0.020423006,0.000115040864,0.00038157296,0.00018705303,5.6239674e-7,0.00020984482,0.00011773664],"genre_scores_gemma":[0.9882636,0.00006927798,0.011544303,0.00005121573,0.000028474413,0.000015388287,3.2728846e-7,0.000023088609,0.000004318162],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9985339,0.00002227461,0.0003485713,0.00021655773,0.00041083942,0.00046786838],"domain_scores_gemma":[0.99929136,0.00008780682,0.00025852918,0.00014375658,0.00013446344,0.00008406199],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0016419507,0.00016038661,0.00027036172,0.0023619188,0.00062573433,0.000031077245,0.00052702695,0.00011044274,0.000008261921],"category_scores_gemma":[0.00053457153,0.0001580736,0.00005623534,0.00091693463,0.00025491713,0.00038386055,0.00016218406,0.0009375926,2.3606448e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00009829589,0.00005525816,0.013987417,0.00007661344,0.00017051786,0.00009638658,0.0006107122,0.19645444,0.51435506,0.00014907913,0.000022249109,0.273924],"study_design_scores_gemma":[0.0010388086,0.0016711307,0.0026660347,0.00006096014,0.0000950773,0.0011640241,0.0032409665,0.01440771,0.96965784,0.004091411,0.001465485,0.0004405563],"about_ca_topic_score_codex":0.000003534729,"about_ca_topic_score_gemma":6.782257e-7,"teacher_disagreement_score":0.45530277,"about_ca_system_score_codex":0.00027797965,"about_ca_system_score_gemma":0.00008838074,"threshold_uncertainty_score":0.6446054},"labels":[],"label_agreement":null},{"id":"W4225159762","doi":"10.1016/j.cirpj.2022.04.009","title":"Monitoring of in-process force coefficients and tool wear","year":2022,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":37,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Dynamometer; Machining; Mechanical engineering; Shear force; Enhanced Data Rates for GSM Evolution; Tool wear; Process (computing); Resultant force; Milling cutter; Shearing (physics); Materials science; Engineering; Computer science; Structural engineering; Physics; Composite material; Classical mechanics","score_opus":0.005379097270662246,"score_gpt":0.23523244493386908,"score_spread":0.22985334766320684,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4225159762","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9954449,0.00074206427,0.0035246173,0.000043001564,0.00015153557,0.00003109461,5.071972e-7,0.000020392588,0.0000419142],"genre_scores_gemma":[0.9983855,0.00022738022,0.0013650443,0.0000031496709,0.000008283568,0.0000016354749,3.9188127e-8,0.0000052820433,0.000003668577],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9994089,0.0000028790614,0.00017964523,0.0000855845,0.00018794344,0.00013502863],"domain_scores_gemma":[0.9997605,0.000016005391,0.00008823307,0.000058863614,0.00005468826,0.000021691683],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00029845978,0.000054276174,0.00011770205,0.0005052627,0.00012022507,0.000012734053,0.00019784691,0.000023581675,0.0000019358245],"category_scores_gemma":[0.00006128434,0.00005272964,0.0000068898853,0.0003753812,0.00014703129,0.00020688267,0.00008064873,0.00021641384,3.833092e-8],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000019067957,0.000027706648,0.021578055,0.00015508552,0.000009024115,0.000022017775,0.000862204,0.8138155,0.01624169,0.00024090806,0.0000016633172,0.14702712],"study_design_scores_gemma":[0.001093032,0.00039177595,0.014742898,0.00019641912,0.000016568407,0.0005035843,0.0047421586,0.023114637,0.9470494,0.0076398896,0.00024171143,0.0002679308],"about_ca_topic_score_codex":4.747407e-7,"about_ca_topic_score_gemma":1.2919273e-7,"teacher_disagreement_score":0.9308077,"about_ca_system_score_codex":0.000038002632,"about_ca_system_score_gemma":0.00002964759,"threshold_uncertainty_score":0.21502523},"labels":[],"label_agreement":null},{"id":"W4317771809","doi":"10.1016/j.cirpj.2022.12.018","title":"Analysis of machining green compacts of a sinter-hardenable powder metallurgy steel: A perspective of material removal mechanism","year":2023,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Powder Metallurgy Techniques and Materials","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université Laval","funders":"Ministry of Education, India","keywords":"Machining; Materials science; Metallurgy; Machinability; Enhanced Data Rates for GSM Evolution; Powder metallurgy; Tool wear; Microstructure; Engineering","score_opus":0.013034863891585053,"score_gpt":0.2505381425105917,"score_spread":0.23750327861900664,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4317771809","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.99825215,0.000101262136,0.0007726037,0.00011239779,0.0002378813,0.00007212378,0.000017222948,0.000092787224,0.00034156433],"genre_scores_gemma":[0.9984396,0.000120342076,0.0013839019,0.000004811923,0.000015421208,0.0000012867555,7.765089e-7,0.000013631802,0.000020237665],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9985038,0.000024274499,0.0006249226,0.00017343332,0.00038424318,0.00028933474],"domain_scores_gemma":[0.9988771,0.0000372426,0.00046119944,0.00024883903,0.00031326723,0.00006236596],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0012373257,0.000149205,0.00079433847,0.0029771302,0.00004987321,0.000021997987,0.0005154477,0.00011373517,0.0000555219],"category_scores_gemma":[0.00010919959,0.00012706021,0.00012474734,0.001227373,0.00044650745,0.00023134334,0.00018485468,0.00014787933,5.6896846e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000034937122,0.000025370637,0.00003451501,0.0001127729,0.0006805713,0.000054590964,0.0004981335,0.0009676728,0.9910936,0.0048721517,0.000013429723,0.0016122852],"study_design_scores_gemma":[0.0002246393,0.00020532815,0.0012208545,0.00009109465,0.0003344247,0.00013957176,0.0008752946,0.0012629079,0.9865569,0.008886011,0.00009338272,0.000109606015],"about_ca_topic_score_codex":0.000086436885,"about_ca_topic_score_gemma":0.000007731908,"teacher_disagreement_score":0.0045366846,"about_ca_system_score_codex":0.00006099227,"about_ca_system_score_gemma":0.00006424254,"threshold_uncertainty_score":0.51813644},"labels":[],"label_agreement":null},{"id":"W4318677295","doi":"10.1016/j.cirpj.2023.01.005","title":"Planar image-space trajectory planning algorithm for contour following in robotic machining","year":2023,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Robotics and Sensor-Based Localization","field":"Engineering","cited_by":10,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Carleton University","funders":"","keywords":"Trajectory; Machining; Computer vision; Motion planning; CAD; Workspace; Controller (irrigation); Planar; Robot; Computer science; Artificial intelligence; Engineering; Algorithm; Control theory (sociology); Engineering drawing; Mechanical engineering; Computer graphics (images); Control (management)","score_opus":0.01213901598431795,"score_gpt":0.24623475719603347,"score_spread":0.2340957412117155,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4318677295","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7867563,0.0004049938,0.21144772,0.0003684569,0.00060046447,0.00011548693,0.0000011745499,0.00016010906,0.00014530901],"genre_scores_gemma":[0.98629487,0.000043093325,0.0135706635,0.000014831653,0.000043543252,0.0000026259213,6.392421e-7,0.000016478123,0.000013265795],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9990222,0.000007690209,0.00026977406,0.00014506189,0.0002039741,0.00035129205],"domain_scores_gemma":[0.9996254,0.000088003304,0.0000772961,0.00009413001,0.000054653585,0.000060549668],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00075153867,0.000109932516,0.00023028757,0.0012971588,0.00014703246,0.000063182146,0.0002403019,0.000090225425,0.0000014063866],"category_scores_gemma":[0.00013512182,0.000105193205,0.00003815933,0.00051896257,0.00012495789,0.0002609923,0.000021712764,0.00025312754,0.0000010314888],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012443559,0.000022379143,0.0020905097,0.000121121455,0.000068589674,0.00067161804,0.0009788844,0.7777497,0.060239192,0.00042316405,0.00072246185,0.1568999],"study_design_scores_gemma":[0.0012671931,0.00018584915,0.005949889,0.00031983413,0.000030661777,0.00018287775,0.0017917883,0.8775236,0.10880866,0.0032895287,0.0003377823,0.00031235223],"about_ca_topic_score_codex":0.000002256487,"about_ca_topic_score_gemma":0.0000017770855,"teacher_disagreement_score":0.19953857,"about_ca_system_score_codex":0.00008204535,"about_ca_system_score_gemma":0.000050960214,"threshold_uncertainty_score":0.42896542},"labels":[],"label_agreement":null},{"id":"W4320473770","doi":"10.1016/j.cirpj.2022.11.021","title":"Characterization of microstructure and residual stress following the friction stir welding of dissimilar aluminum alloys","year":2023,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Welding Techniques Analysis","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia, Okanagan Campus; University of British Columbia","funders":"","keywords":"Residual stress; Materials science; Electron backscatter diffraction; Friction stir welding; Welding; Microstructure; Diffraction; Metallurgy; Stress (linguistics); Composite material; Optics","score_opus":0.0061660970782912924,"score_gpt":0.22519717176574044,"score_spread":0.21903107468744915,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4320473770","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9965289,0.00011532426,0.0027495497,0.0003222557,0.00014464448,0.0000530279,0.00000490892,0.00007427212,0.0000071122204],"genre_scores_gemma":[0.998422,0.00044949053,0.001084658,0.0000037046802,0.000025818304,0.000001060967,0.0000010495671,0.000008829806,0.0000033839779],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9991938,0.000008801509,0.00029336178,0.00011335783,0.00022653419,0.0001641461],"domain_scores_gemma":[0.9994854,0.000037942827,0.00021349207,0.00015204717,0.000083112245,0.000028033806],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00048314733,0.00008913781,0.00020734503,0.000688465,0.00013737219,0.000022125529,0.00028761732,0.00008442572,0.0000011243376],"category_scores_gemma":[0.00010401963,0.00006707284,0.000032709737,0.0006415359,0.00030319596,0.0002715725,0.000101593265,0.0002069863,7.7040184e-8],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0000033911003,0.0000029514301,0.0030962161,0.000047232257,0.0000345207,0.0000072656853,0.00022551109,0.002173866,0.9851261,0.00007347549,0.000012863768,0.009196647],"study_design_scores_gemma":[0.000091388414,0.000041718136,0.018984238,0.00010939916,0.00003754268,0.000040519997,0.00037761626,0.0008141657,0.9778967,0.001454805,0.00008770691,0.00006421666],"about_ca_topic_score_codex":0.0000017547576,"about_ca_topic_score_gemma":0.0000013980698,"teacher_disagreement_score":0.015888022,"about_ca_system_score_codex":0.00002774297,"about_ca_system_score_gemma":0.000017876027,"threshold_uncertainty_score":0.2735151},"labels":[],"label_agreement":null},{"id":"W4379046899","doi":"10.1016/j.cirpj.2023.05.004","title":"Identification and effect of chip shear band on chatter vibration in the turning of Nickel Alloy 718","year":2023,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":6,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Adiabatic shear band; Chip formation; Machining; Vibration; Materials science; Chip; Shear (geology); Alloy; Natural frequency; Structural engineering; Metallurgy; Acoustics; Tool wear; Engineering; Composite material; Physics; Electrical engineering","score_opus":0.0054188500923071335,"score_gpt":0.23435742228069803,"score_spread":0.2289385721883909,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4379046899","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9982235,0.00012589853,0.001188433,0.00030298953,0.00006459909,0.000053398755,3.7962562e-7,0.000016219265,0.000024597306],"genre_scores_gemma":[0.999623,0.00022904374,0.00012313048,0.000008082687,0.000009255485,0.0000014311605,2.7863112e-7,0.000003845097,0.0000019134675],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9994901,0.0000104642,0.0001909602,0.00007376748,0.00014509229,0.000089638226],"domain_scores_gemma":[0.9996827,0.00007682046,0.00011807949,0.00007603256,0.000035056215,0.0000113129045],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00076723914,0.000052150648,0.0001110384,0.00050407,0.000052958912,0.000017888578,0.00014168289,0.000041259176,6.7012513e-7],"category_scores_gemma":[0.00013626344,0.000035929763,0.000009319052,0.00035957518,0.00015091625,0.000207877,0.000015926566,0.00014280126,3.150474e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00005817876,0.000023435598,0.008552632,0.0005498292,0.000022006487,0.000011617597,0.002119333,0.37472665,0.49977538,0.00048068573,0.000037537447,0.1136427],"study_design_scores_gemma":[0.0003061384,0.00023691599,0.04120139,0.00013732903,0.000009334611,0.00003622583,0.00021898869,0.011717039,0.9452667,0.000788418,0.000026738,0.000054733428],"about_ca_topic_score_codex":6.228118e-7,"about_ca_topic_score_gemma":6.3783926e-7,"teacher_disagreement_score":0.44549137,"about_ca_system_score_codex":0.000010119144,"about_ca_system_score_gemma":0.000008723855,"threshold_uncertainty_score":0.14651732},"labels":[],"label_agreement":null},{"id":"W4380489216","doi":"10.1016/j.cirpj.2023.06.004","title":"Corrigendum to “Analysis of machining green compacts of a sinter-hardenable powder metallurgy steel: A perspective of material removal mechanism” [CIRP Journal of Manufacturing Science and Technology 41 (2023) 430–445]","year":2023,"lang":"en","type":"erratum","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Université Laval","funders":"","keywords":"Machining; Metallurgy; Powder metallurgy; Materials science; Mechanism (biology); Perspective (graphical); Manufacturing engineering; Engineering; Computer science; Microstructure","score_opus":0.01170767705845014,"score_gpt":0.2501838249735942,"score_spread":0.23847614791514407,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4380489216","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.97327733,0.002492523,0.013539898,0.0007021792,0.008548384,0.00040235653,0.000098667064,0.00014961878,0.0007890421],"genre_scores_gemma":[0.99210167,0.0008905288,0.006410038,0.000012723391,0.000114117924,0.0000025371924,0.0000026608438,0.00005846582,0.00040724076],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99587613,0.000031734708,0.0015014095,0.000554343,0.0013303393,0.000706067],"domain_scores_gemma":[0.99467653,0.00006790468,0.0022848651,0.0004830245,0.002273435,0.00021421451],"candidate_categories":["metaepi_narrow","bibliometrics"],"consensus_categories":[],"category_scores_codex":[0.0021580202,0.00046563928,0.0018623531,0.01127089,0.00026616926,0.00010265212,0.0017009367,0.00047925528,0.000028417677],"category_scores_gemma":[0.0009689545,0.00041564033,0.00017230348,0.0036384007,0.0017490953,0.00068095524,0.0006692527,0.0012253834,5.2779075e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0013243781,0.00062576,0.0003426384,0.0064865686,0.011313893,0.001715836,0.01121974,0.24499898,0.63105476,0.0107277315,0.004048857,0.076140836],"study_design_scores_gemma":[0.0009679931,0.0014358731,0.0005752668,0.0016830041,0.001648525,0.001640868,0.00630581,0.007706234,0.9672021,0.008830673,0.0013175012,0.00068613025],"about_ca_topic_score_codex":0.00007719426,"about_ca_topic_score_gemma":0.000045966917,"teacher_disagreement_score":0.33614734,"about_ca_system_score_codex":0.00038856256,"about_ca_system_score_gemma":0.00075783127,"threshold_uncertainty_score":0.9999355},"labels":[],"label_agreement":null},{"id":"W4385657923","doi":"10.1016/j.cirpj.2023.07.008","title":"Effect of equiaxed grains and secondary phase particles on mechanical properties and corrosion behaviour of CMT- based wire arc additive manufactured AZ31 Mg alloy","year":2023,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Magnesium Alloys: Properties and Applications","field":"Materials Science","cited_by":42,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Department of Mechanical Engineering, University of Alberta; National Institute of Technology Karnataka, Surathkal; Department of Science and Technology, Ministry of Science and Technology, India","keywords":"Equiaxed crystals; Materials science; Microstructure; Metallurgy; Alloy; Corrosion; Ultimate tensile strength; Elongation; Dendrite (mathematics); Phase (matter); Deposition (geology); Composite material","score_opus":0.018197886524440588,"score_gpt":0.25974314431196327,"score_spread":0.24154525778752267,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4385657923","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9983882,0.00012406781,0.000028876351,0.0010382213,0.00010000424,0.00024114236,0.000025860687,0.000039792703,0.000013861431],"genre_scores_gemma":[0.99960345,0.00008181263,0.00022235919,0.000036389527,0.000017867389,0.000015326475,9.5092537e-7,0.000009061214,0.000012796422],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9985735,0.000061246035,0.00040175056,0.0003021556,0.0003703575,0.0002910135],"domain_scores_gemma":[0.9990359,0.00013233461,0.00035847392,0.00021433228,0.000146829,0.00011215367],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0013214315,0.00015858309,0.00037428565,0.0004446093,0.00026118077,0.000050781004,0.0003375692,0.000104827115,0.000030638945],"category_scores_gemma":[0.0002554002,0.00010474069,0.00003575169,0.00025067732,0.0014790725,0.00022152996,0.00020923016,0.00020637759,0.0000016010335],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00020346695,0.00006478701,0.0001114347,0.00010237459,0.0000031993698,0.000012639888,0.0001067497,0.000010502979,0.9717905,0.00018043841,0.000038792565,0.027375104],"study_design_scores_gemma":[0.0012313119,0.0025295636,0.002227551,0.0001467224,0.000041979205,0.00006779432,0.0003401626,0.00033794483,0.99247706,0.0004116922,0.00007889268,0.00010930386],"about_ca_topic_score_codex":0.000013025517,"about_ca_topic_score_gemma":0.0000048670627,"teacher_disagreement_score":0.0272658,"about_ca_system_score_codex":0.000021479607,"about_ca_system_score_gemma":0.000104548926,"threshold_uncertainty_score":0.54497045},"labels":[],"label_agreement":null},{"id":"W4391435507","doi":"10.1016/j.cirpj.2024.01.005","title":"Digital twin assisted intelligent machining process monitoring and control","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":41,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Machining; Process (computing); Engineering; Sensor fusion; Tool wear; Accelerometer; Transient (computer programming); Control engineering; Real-time computing; Computer science; Mechanical engineering; Artificial intelligence","score_opus":0.006733099673252616,"score_gpt":0.24868670503874848,"score_spread":0.24195360536549587,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4391435507","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9250517,0.0045992476,0.069111206,0.00022260072,0.00045028175,0.000048519716,0.0000010625167,0.00020135885,0.00031401144],"genre_scores_gemma":[0.99855494,0.00036966614,0.0009936598,0.000003978564,0.000054582393,0.0000015186644,1.0954418e-7,0.000011997697,0.000009514777],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99929917,0.0000019504275,0.00020305435,0.00013944949,0.00017108765,0.00018529862],"domain_scores_gemma":[0.9997022,0.000039012142,0.000049831957,0.00006022156,0.00008467971,0.00006406071],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00023261138,0.00009982583,0.00013983657,0.0005305335,0.00011537889,0.00025400583,0.0001679036,0.000057098136,0.000001334482],"category_scores_gemma":[0.00010913394,0.000082435785,0.000013665266,0.0002967124,0.00020666803,0.00073516916,0.00003347915,0.0003029664,6.172873e-7],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000006677668,0.0000076522165,0.0020377967,0.00019022812,0.000034013334,0.00006283514,0.00028580186,0.023501894,0.0043557226,0.00020386788,0.0000038316243,0.9693097],"study_design_scores_gemma":[0.0010878163,0.0005206195,0.0066378186,0.0019214437,0.00012366586,0.0047120606,0.0026085936,0.12010456,0.8425115,0.0146288965,0.004329218,0.0008138165],"about_ca_topic_score_codex":1.361975e-7,"about_ca_topic_score_gemma":8.390177e-8,"teacher_disagreement_score":0.96849585,"about_ca_system_score_codex":0.0000425937,"about_ca_system_score_gemma":0.000041803447,"threshold_uncertainty_score":0.33616337},"labels":[],"label_agreement":null},{"id":"W4391669492","doi":"10.1016/j.cirpj.2024.01.009","title":"A unified FFT-based mechanistic force coefficient identification model for isotropic and anisotropic materials","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":8,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Machining; Rake; Isotropy; Rake angle; Mechanical engineering; Kinematics; Drilling; Materials science; Deflection (physics); Tool wear; Structural engineering; Engineering; Physics; Classical mechanics","score_opus":0.008545647024143906,"score_gpt":0.23971604082384557,"score_spread":0.23117039379970167,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4391669492","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.35117295,0.00044670547,0.6478484,0.00018006687,0.00019752797,0.000070709386,0.0000033869803,0.00007524885,0.0000049590203],"genre_scores_gemma":[0.98763716,0.00016493286,0.0121282665,0.000010971879,0.000018594888,0.0000061320006,9.0843906e-7,0.000011248311,0.000021777289],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9993662,0.000002512506,0.00021272883,0.00014465975,0.00011710426,0.00015678469],"domain_scores_gemma":[0.99968463,0.000027907736,0.00006450101,0.00008175168,0.00010477998,0.000036407655],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00021260855,0.00008351666,0.00012381913,0.0004454968,0.00013757778,0.0001349465,0.00014455875,0.00005743487,0.0000012519916],"category_scores_gemma":[0.000073699266,0.000072420524,0.000011625449,0.00018575863,0.00014134383,0.00021746503,0.000022881388,0.000087864886,3.4166328e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000020714775,0.000014009834,0.0000058444016,0.000701223,0.000019652993,0.000011502371,0.00020403203,0.51045084,0.43022838,0.0241478,0.000026397434,0.034169596],"study_design_scores_gemma":[0.00015028066,0.00006353911,0.000019530105,0.00006655273,0.000020227073,0.000044181532,0.00003931225,0.6670867,0.31851965,0.013848286,0.000077325516,0.00006441486],"about_ca_topic_score_codex":2.5419575e-7,"about_ca_topic_score_gemma":4.132921e-7,"teacher_disagreement_score":0.6364642,"about_ca_system_score_codex":0.000049657014,"about_ca_system_score_gemma":0.00006215712,"threshold_uncertainty_score":0.29532233},"labels":[],"label_agreement":null},{"id":"W4392436326","doi":"10.1016/j.cirpj.2024.02.005","title":"Thermo-mechanical finite element analysis of the solid-state metal deposition via lateral friction surfacing","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Welding Techniques Analysis","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":false,"route_ca_aff":false,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"","funders":"Office of Naval Research; General Motors of Canada; General Motors Corporation; National Science Foundation","keywords":"Materials science; Finite element method; Substrate (aquarium); Deposition (geology); Composite material; Dwell time; Fabrication; Thermal; Stress (linguistics); Material properties; Thermal conductivity; Die (integrated circuit); Process (computing); Structural engineering; Engineering; Nanotechnology","score_opus":0.005709170091453646,"score_gpt":0.23553537233785526,"score_spread":0.22982620224640163,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4392436326","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.80421203,0.00021617574,0.1951014,0.00017028915,0.00014640062,0.000038015256,0.0000019586485,0.00009728722,0.000016426045],"genre_scores_gemma":[0.99788564,0.00014927477,0.0019296274,0.000007720577,0.000012779932,0.0000015880423,3.0074037e-7,0.000008520218,0.0000045619818],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9989689,0.0000138257865,0.00036882516,0.000149865,0.00030069266,0.00019791268],"domain_scores_gemma":[0.99952257,0.000039977018,0.00012143305,0.00018799036,0.000093648465,0.00003441398],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006038888,0.00010467817,0.00025130872,0.0012698198,0.00011908023,0.00004844701,0.0003276351,0.00006574903,0.000007909693],"category_scores_gemma":[0.000035181616,0.000072887386,0.00012631528,0.0015513876,0.00017658662,0.000286088,0.000095032796,0.0003061612,4.6396195e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.0000061815945,0.000017490087,0.00060072687,0.000050324303,0.0008969656,0.00003403097,0.00019973429,0.2706596,0.65603405,0.00039380835,0.000008548385,0.07109856],"study_design_scores_gemma":[0.000043491014,0.000044365133,0.0010866836,0.00004844799,0.00042140417,0.00004544514,0.000026362832,0.19207315,0.801685,0.004417003,0.000037887872,0.00007077258],"about_ca_topic_score_codex":0.0000060250954,"about_ca_topic_score_gemma":0.000009752301,"teacher_disagreement_score":0.19367358,"about_ca_system_score_codex":0.00012375177,"about_ca_system_score_gemma":0.000022712034,"threshold_uncertainty_score":0.29722613},"labels":[],"label_agreement":null},{"id":"W4393103364","doi":"10.1016/j.cirpj.2024.03.004","title":"Horngear and carrier design for braiding tailorable composite preforms","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Material Properties and Applications","field":"Materials Science","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Composite number; Materials science; Composite material; Mechanical engineering; Computer science; Engineering","score_opus":0.02070822507057849,"score_gpt":0.25045511574221074,"score_spread":0.22974689067163226,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4393103364","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9905565,0.00091448246,0.0063033076,0.0016718069,0.00025396433,0.00018341048,0.0000050328485,0.000048128455,0.000063372034],"genre_scores_gemma":[0.994738,0.00009453443,0.0049920585,0.000028997098,0.00006003268,0.000013899444,9.829481e-8,0.000006825608,0.00006556019],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99922234,0.000007316929,0.00020038986,0.00019817833,0.00014586834,0.00022588538],"domain_scores_gemma":[0.9996017,0.00003959314,0.000080614336,0.00010756116,0.000103821105,0.00006666946],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0010118022,0.000079219135,0.0001439451,0.00026873327,0.00035753343,0.00033831192,0.00027959005,0.00005490254,0.00001554907],"category_scores_gemma":[0.000059906743,0.00005211342,0.000015273426,0.00015008968,0.0005525452,0.0004595886,0.00010580314,0.000094646566,0.000002953692],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000012803118,0.0000054201378,0.000010450068,0.000056454835,0.00000383101,0.0000040173236,0.00009594711,0.00002768121,0.9815368,0.0018396544,0.00011781579,0.0162891],"study_design_scores_gemma":[0.00010856562,0.00016490446,0.00006338704,0.00007627309,0.0000130076005,0.00023084898,0.00015128996,0.00040490844,0.97855484,0.01172429,0.008433124,0.00007455244],"about_ca_topic_score_codex":0.0000041648273,"about_ca_topic_score_gemma":3.6514584e-7,"teacher_disagreement_score":0.016214548,"about_ca_system_score_codex":0.000033699886,"about_ca_system_score_gemma":0.00009053025,"threshold_uncertainty_score":0.32623497},"labels":[],"label_agreement":null},{"id":"W4396554532","doi":"10.1016/j.cirpj.2024.04.008","title":"Physics based models for characterization of machining performance – A critical review","year":2024,"lang":"en","type":"review","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":36,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"National Research Council Canada; University of British Columbia; McGill University","funders":"","keywords":"Machining; Characterization (materials science); Mechanical engineering; Computer science; Engineering; Manufacturing engineering; Materials science; Systems engineering; Nanotechnology","score_opus":0.03321355867917534,"score_gpt":0.3105007309753048,"score_spread":0.2772871722961294,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4396554532","genre_codex":"review","genre_gemma":"review","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"review","genre_consensus":"review","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.00006533383,0.846593,0.1527824,0.00005207022,0.0002496362,0.00017158213,0.000010687387,0.000052365336,0.000022929149],"genre_scores_gemma":[0.004323354,0.9901318,0.0054251617,0.000014704625,0.00005245978,0.000015476582,0.000004986817,0.000029348465,0.0000027380863],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9988957,0.000005913526,0.0005374816,0.00017127547,0.00019530708,0.00019430216],"domain_scores_gemma":[0.99925345,0.00005711404,0.0002770558,0.00013924311,0.00023186281,0.00004130068],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004644552,0.00019092693,0.0007686705,0.0004941904,0.00008081222,0.000032577827,0.000333164,0.00012649897,0.0000011167876],"category_scores_gemma":[0.0001415882,0.0001473804,0.0000898961,0.00047701818,0.00022499489,0.00041300693,0.00004583578,0.00037562288,3.9299223e-7],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[9.872589e-7,0.0000052283235,9.3040875e-8,0.077213734,0.00001487396,0.0000015272125,0.000008282741,0.0025785472,0.000026568003,0.00039398993,0.0000046371874,0.9197515],"study_design_scores_gemma":[0.00044404686,0.00057621516,0.0000014667905,0.34371445,0.002942523,0.0006248199,0.000017127673,0.3753473,0.009373181,0.0071526477,0.25873625,0.0010699776],"about_ca_topic_score_codex":3.758909e-8,"about_ca_topic_score_gemma":1.6530608e-8,"teacher_disagreement_score":0.91868156,"about_ca_system_score_codex":0.000054665034,"about_ca_system_score_gemma":0.00019907822,"threshold_uncertainty_score":0.60099983},"labels":[],"label_agreement":null},{"id":"W4399555617","doi":"10.1016/j.cirpj.2024.05.018","title":"Identification of dynamic coefficient matrix for drilling process simulations from measured tool geometry, axial force and torque","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":9,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Torque; Process (computing); Identification (biology); Matrix (chemical analysis); Drilling; Mechanical engineering; Geometry; Engineering; Control theory (sociology); Structural engineering; Computer science; Mathematics; Physics; Materials science; Control (management); Artificial intelligence","score_opus":0.005717566469279433,"score_gpt":0.2666975760396359,"score_spread":0.26098000957035644,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4399555617","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.6149852,0.00117929,0.38348064,0.000064332635,0.00017203594,0.00006705529,0.000008112766,0.000041596526,0.0000017148205],"genre_scores_gemma":[0.9960937,0.0001555046,0.0037062136,0.0000018714499,0.00002250081,0.0000025028694,0.0000012750818,0.000009736528,0.0000067210435],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99928415,0.000002128878,0.00029059467,0.00013812182,0.00016270544,0.00012230323],"domain_scores_gemma":[0.9995191,0.0000696217,0.00010681228,0.00007467479,0.00020424773,0.000025542575],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002892422,0.00007356567,0.0001300348,0.0005344257,0.000116671166,0.00007390127,0.0001424388,0.00006359809,0.0000011407211],"category_scores_gemma":[0.00020494053,0.00006633802,0.000016275744,0.00034744974,0.0001577235,0.00033925756,0.000020196756,0.000116041716,1.0431416e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000011402919,0.000009555568,0.00008956449,0.00030494411,0.000025038586,0.0000016079791,0.00032806137,0.8648542,0.07358129,0.0004968933,0.0000018753303,0.060295552],"study_design_scores_gemma":[0.00018530646,0.00005284296,0.0003698393,0.0001299337,0.00003443727,0.000024724686,0.00016611324,0.7492212,0.2373503,0.012328202,0.00004705117,0.00009002597],"about_ca_topic_score_codex":5.582614e-7,"about_ca_topic_score_gemma":0.0000015082919,"teacher_disagreement_score":0.38110843,"about_ca_system_score_codex":0.000045288976,"about_ca_system_score_gemma":0.0000501791,"threshold_uncertainty_score":0.27051857},"labels":[],"label_agreement":null},{"id":"W4399765925","doi":"10.1016/j.cirpj.2024.06.003","title":"A multiscale finite element modeling for predicting the surface integrity induced by thermo-mechanical loads during high-speed milling of Ti-6Al-4V","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Finite element method; Materials science; Surface integrity; Surface (topology); Mechanical engineering; Structural engineering; Composite material; Engineering; Surface roughness; Geometry; Mathematics","score_opus":0.012045492050963379,"score_gpt":0.2460553869781955,"score_spread":0.23400989492723212,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4399765925","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.7719394,0.0009891244,0.2263371,0.00029003076,0.0002477344,0.0001022978,0.0000047105477,0.00008271321,0.0000069107937],"genre_scores_gemma":[0.9929168,0.00036236012,0.00664631,0.000006367106,0.000042545456,0.0000025295521,6.2301103e-7,0.000018028202,0.000004408832],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9989065,0.0000073463148,0.00039786863,0.00018760472,0.0002325409,0.0002681187],"domain_scores_gemma":[0.9994398,0.00012051134,0.00011611824,0.00012675177,0.0001519758,0.000044894154],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007431241,0.00012939775,0.00020417664,0.0002314098,0.00022176138,0.00006772579,0.00035032677,0.00010884312,0.0000020953612],"category_scores_gemma":[0.00019583845,0.00009287094,0.000038304122,0.00030125087,0.00013004249,0.00031111867,0.00008488347,0.0005376527,1.8558669e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000015596765,0.000011447842,0.000032796714,0.00019129575,0.000033103515,0.0000028008797,0.00032460777,0.7545002,0.23086894,0.00020907218,0.0000037237755,0.013806418],"study_design_scores_gemma":[0.0001904708,0.00007312836,0.0000121676285,0.00018332388,0.000017924966,0.000021786664,0.0002720219,0.57309955,0.42475682,0.0012816401,0.000021894512,0.00006922475],"about_ca_topic_score_codex":0.0000062304607,"about_ca_topic_score_gemma":0.0000017344438,"teacher_disagreement_score":0.22097746,"about_ca_system_score_codex":0.00007346375,"about_ca_system_score_gemma":0.00005201401,"threshold_uncertainty_score":0.3787167},"labels":[],"label_agreement":null},{"id":"W4399909450","doi":"10.1016/j.cirpj.2024.06.005","title":"Modeling and identification of clamping contact stiffness","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Adhesion, Friction, and Surface Interactions","field":"Engineering","cited_by":5,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Clamping; Stiffness; Identification (biology); Structural engineering; Contact theory; Materials science; Mechanical engineering; Engineering; Computer science","score_opus":0.009423454612005068,"score_gpt":0.241024274234787,"score_spread":0.23160081962278195,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4399909450","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.98128045,0.0015840164,0.016281184,0.00017543197,0.00052883674,0.000028938213,8.079757e-7,0.00006497327,0.000055363264],"genre_scores_gemma":[0.99909675,0.0006734446,0.00018648645,0.000002058442,0.000024440393,6.728685e-7,8.004263e-8,0.0000058063506,0.000010259195],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9993666,0.0000039577885,0.00027994986,0.000099688106,0.00013973124,0.00011011079],"domain_scores_gemma":[0.9996837,0.00003316166,0.000046772893,0.00007887171,0.00012334,0.00003420093],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00038211592,0.00006164689,0.000116675394,0.00066849944,0.00011326868,0.0000691712,0.0001231903,0.00005492861,0.0000028391712],"category_scores_gemma":[0.000060106882,0.00005349928,0.00001751079,0.00023921931,0.0001348951,0.000504872,0.000021971311,0.00019815894,8.163734e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00000908652,0.000017219598,0.00059340335,0.00029193732,0.00006676104,0.000025245763,0.0011679449,0.038925648,0.8261021,0.0032587035,0.000050447856,0.12949152],"study_design_scores_gemma":[0.00015870696,0.000059124737,0.004661382,0.00037045206,0.000042045158,0.0006390192,0.0017072421,0.30900627,0.6759142,0.006666602,0.0006232235,0.00015168909],"about_ca_topic_score_codex":0.000003822551,"about_ca_topic_score_gemma":0.0000020600487,"teacher_disagreement_score":0.27008063,"about_ca_system_score_codex":0.000043658838,"about_ca_system_score_gemma":0.000041106043,"threshold_uncertainty_score":0.21816373},"labels":[],"label_agreement":null},{"id":"W4399999836","doi":"10.1016/j.cirpj.2024.06.008","title":"Enhancing multi-facility manufacturing resilience through integrated product and supply chain network design","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Supply Chain Resilience and Risk Management","field":"Business, Management and Accounting","cited_by":9,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Toronto Metropolitan University","funders":"Natural Sciences and Engineering Research Council of Canada; Government of Canada","keywords":"Supply chain; Resilience (materials science); Product design; Product (mathematics); Manufacturing engineering; Systems engineering; Business; Computer science; Engineering","score_opus":0.015733095509035146,"score_gpt":0.24153384365805763,"score_spread":0.22580074814902248,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4399999836","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.94465554,0.0047545265,0.044877063,0.0037321635,0.001147349,0.0004574407,9.657317e-7,0.0002306618,0.00014431041],"genre_scores_gemma":[0.9914084,0.00066606945,0.007161161,0.00029398515,0.00034762028,0.000010113101,6.342216e-7,0.000014713876,0.0000972997],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9975365,0.0000212421,0.0005424596,0.0006706485,0.0005403314,0.00068882364],"domain_scores_gemma":[0.99902856,0.00011729097,0.00027702225,0.00032015817,0.00021670596,0.000040264982],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0026819203,0.0002913016,0.00036917286,0.0011192652,0.00065083924,0.00074801786,0.0007433216,0.000107344335,0.000021560638],"category_scores_gemma":[0.00044292366,0.00021616255,0.00005028864,0.0010933643,0.0011761829,0.0025060622,0.000491157,0.00058759534,0.000017822065],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00017011282,0.00022515978,0.012187736,0.0021961157,0.00021649343,0.0015073663,0.0012532007,0.008026367,0.032074686,0.009117087,0.0037593346,0.92926633],"study_design_scores_gemma":[0.0013566791,0.0002724948,0.02534772,0.002212557,0.0002680377,0.0007723051,0.0053912555,0.010253547,0.82952315,0.04834987,0.07491543,0.0013369467],"about_ca_topic_score_codex":0.000083884006,"about_ca_topic_score_gemma":0.000028271312,"teacher_disagreement_score":0.9279294,"about_ca_system_score_codex":0.000097678814,"about_ca_system_score_gemma":0.00014404577,"threshold_uncertainty_score":0.8814853},"labels":[],"label_agreement":null},{"id":"W4400378793","doi":"10.1016/j.cirpj.2024.06.012","title":"Special Issue on Machinability Revisited: Integrated Machining Performance For Assessment of Cutting Tools (IMPACT)","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Machinability; Machining; Manufacturing engineering; Engineering; Mechanical engineering; Computer science","score_opus":0.011988094638059693,"score_gpt":0.29858136367619403,"score_spread":0.2865932690381343,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4400378793","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9626383,0.00037834383,0.03435193,0.00018021847,0.00066190824,0.00014307469,0.000008588881,0.00011307139,0.0015245652],"genre_scores_gemma":[0.98745495,0.0002579175,0.011868036,0.000008895202,0.00038281712,0.0000027002743,0.0000012176073,0.00001325646,0.0000102113],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99903905,0.000006402849,0.0003536264,0.00016935602,0.00021163964,0.0002199066],"domain_scores_gemma":[0.9994274,0.00010076697,0.00012530852,0.000121320605,0.00017893479,0.00004631409],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00086416426,0.0001284849,0.00023959372,0.0006341586,0.0001363907,0.00009746142,0.00025822918,0.00007309434,0.000014488413],"category_scores_gemma":[0.00027108006,0.00009844842,0.000041849806,0.00043427193,0.00018962946,0.0005538947,0.00003804009,0.0004118921,4.1036597e-7],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00001894559,0.000014865483,0.00092392886,0.0004859191,0.000028107941,0.0000058162577,0.00015355807,0.11599748,0.001687682,0.0009466502,0.00012064573,0.8796164],"study_design_scores_gemma":[0.0009032539,0.002126175,0.011540295,0.0024734465,0.0001009572,0.00038980326,0.0006076614,0.64076793,0.30708486,0.004578291,0.028852565,0.0005747666],"about_ca_topic_score_codex":6.4284677e-7,"about_ca_topic_score_gemma":1.9779213e-7,"teacher_disagreement_score":0.8790416,"about_ca_system_score_codex":0.00016397201,"about_ca_system_score_gemma":0.00012881402,"threshold_uncertainty_score":0.401461},"labels":[],"label_agreement":null},{"id":"W4403623358","doi":"10.1016/j.cirpj.2024.10.005","title":"Digital dynamic modeling and topology optimized design of shell face mills","year":2024,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Face (sociological concept); Topology (electrical circuits); Shell (structure); Computer science; Engineering; Mechanical engineering; Electrical engineering; Sociology","score_opus":0.006776056069359214,"score_gpt":0.22947577908889802,"score_spread":0.2226997230195388,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4403623358","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.33769786,0.0041631847,0.65768933,0.00013845105,0.00013674473,0.000037529953,0.00000105682,0.0000616524,0.000074191856],"genre_scores_gemma":[0.9769021,0.0018333044,0.021229573,0.0000042998654,0.000008049684,6.7063655e-7,1.6421849e-7,0.0000093193385,0.000012512257],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9993849,0.0000029574865,0.00021736982,0.00012560945,0.000109873574,0.00015933941],"domain_scores_gemma":[0.99972695,0.000044980563,0.000048371978,0.00007092014,0.00006984977,0.00003893194],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00022887519,0.000086772656,0.0001709026,0.00051540113,0.00006011514,0.0000639074,0.00016948207,0.000073008945,0.0000018365433],"category_scores_gemma":[0.00007885259,0.00007266833,0.0000141613045,0.00022075207,0.0002989927,0.00047063356,0.00005207313,0.0001969229,3.253302e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000006369114,0.0000032620271,0.000006579315,0.00006567083,0.000012383672,0.000011622557,0.000108288834,0.90821683,0.0042358283,0.00014632755,0.0000021517562,0.08718467],"study_design_scores_gemma":[0.0001808306,0.00009681842,0.0000072039356,0.000105903804,0.000014691555,0.0003409003,0.00023188912,0.957913,0.0353395,0.005615096,0.000064836924,0.00008936227],"about_ca_topic_score_codex":2.4518303e-7,"about_ca_topic_score_gemma":1.234831e-7,"teacher_disagreement_score":0.63920426,"about_ca_system_score_codex":0.000028880111,"about_ca_system_score_gemma":0.00004361236,"threshold_uncertainty_score":0.29633284},"labels":[],"label_agreement":null},{"id":"W4408909728","doi":"10.1016/j.cirpj.2025.03.005","title":"Advanced ultra-high precision system (NanoCyl) for accurate cylindricity measurements","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Measurement and Metrology Techniques","field":"Engineering","cited_by":3,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Polytechnique Montréal","funders":"European Partnership on Metrology","keywords":"Computer science","score_opus":0.015340969059881162,"score_gpt":0.26101396102733837,"score_spread":0.2456729919674572,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4408909728","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.8780099,0.000909666,0.11860557,0.0001994301,0.00088802463,0.0003063549,0.0000018364166,0.0002743827,0.0008048244],"genre_scores_gemma":[0.98948926,0.00015937244,0.010258068,0.00002305324,0.000024453382,0.000018654462,2.233936e-7,0.000009356337,0.000017557459],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99875546,0.000009991663,0.00039197895,0.00020460304,0.00029617472,0.0003417694],"domain_scores_gemma":[0.999071,0.000054874192,0.00016790541,0.00020642902,0.00044152426,0.000058285787],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0011827803,0.00015301336,0.0003187535,0.0010490019,0.0002237315,0.000032319567,0.000501947,0.00014426374,8.845595e-7],"category_scores_gemma":[0.00028736365,0.0001287513,0.000041053423,0.00044456465,0.00026817134,0.0003826764,0.000040658935,0.00025612567,4.870916e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00008134212,0.000029699502,0.00079956296,0.00021794083,0.00007097688,0.000007714572,0.000031926644,0.0018669452,0.71988124,0.001671596,0.00015721947,0.27518386],"study_design_scores_gemma":[0.0006926644,0.00013636678,0.0012036333,0.0002222175,0.000034034445,0.0000404369,0.0000881646,0.00012454164,0.9923403,0.0034872547,0.0015180523,0.00011230635],"about_ca_topic_score_codex":4.4045385e-7,"about_ca_topic_score_gemma":0.0000010450838,"teacher_disagreement_score":0.27507153,"about_ca_system_score_codex":0.00024343039,"about_ca_system_score_gemma":0.00008610142,"threshold_uncertainty_score":0.5250326},"labels":[],"label_agreement":null},{"id":"W4409019383","doi":"10.1016/j.cirpj.2025.03.003","title":"Machine learning models for predicting volumetric errors based on scale and master balls artefact probing data","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Measurement and Metrology Techniques","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Dawson College; Université de Montréal; Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Scale (ratio); Computer science; Artificial intelligence; Machine learning; Cartography; Geography","score_opus":0.030132598940537814,"score_gpt":0.2505831989997685,"score_spread":0.22045060005923067,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4409019383","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.6708645,0.0012762691,0.32573128,0.00072677084,0.0002369578,0.00026277755,0.0000047581125,0.00024483266,0.00065182196],"genre_scores_gemma":[0.98552793,0.00013856807,0.014222153,0.000044122415,0.00001761327,0.0000057751977,9.748488e-7,0.000010558423,0.000032280972],"study_design_codex":"design_other","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9989962,0.0000100609395,0.00025975853,0.0002439377,0.00019904801,0.00029096924],"domain_scores_gemma":[0.99940515,0.000084176456,0.00011405785,0.00022868339,0.00011663623,0.000051298728],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0013150725,0.00013072227,0.0002284467,0.0016310879,0.00023372588,0.000042828928,0.00044629024,0.00010585598,0.0000010811536],"category_scores_gemma":[0.00032862034,0.000113370974,0.00001883278,0.00042738195,0.0002571894,0.000483541,0.0001219701,0.0004301778,1.07521316e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00015883248,0.00009937703,0.0626074,0.0005314989,0.00013187599,0.000023491975,0.00020093462,0.121229574,0.063419476,0.00067956187,0.0002971217,0.75062084],"study_design_scores_gemma":[0.0010043982,0.000422662,0.0014782863,0.00032929078,0.00006719669,0.000047572088,0.00015278229,0.7427621,0.2448027,0.0061490154,0.0025725928,0.00021140435],"about_ca_topic_score_codex":9.646046e-7,"about_ca_topic_score_gemma":0.0000026393532,"teacher_disagreement_score":0.7504094,"about_ca_system_score_codex":0.00006376498,"about_ca_system_score_gemma":0.000051681178,"threshold_uncertainty_score":0.4623134},"labels":[],"label_agreement":null},{"id":"W4409986319","doi":"10.1016/j.cirpj.2025.04.005","title":"Two-stage LP/NLP feedrate optimization for spline toolpaths","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced Numerical Analysis Techniques","field":"Engineering","cited_by":4,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of Waterloo","funders":"Natural Sciences and Engineering Research Council of Canada; Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada; Pratt and Whitney Canada","keywords":"Stage (stratigraphy); Artificial intelligence; Spline (mechanical); Engineering drawing; Computer science; Computer vision; Mathematics; Engineering; Mechanical engineering; Geology","score_opus":0.005453050098344694,"score_gpt":0.25978099877639504,"score_spread":0.25432794867805036,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4409986319","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.3122218,0.00038820013,0.6859887,0.0006430841,0.00013962253,0.00009967831,0.000001612838,0.00017985134,0.0003374223],"genre_scores_gemma":[0.9061801,0.00023534654,0.09339518,0.000053545675,0.000022863915,0.0000061861533,3.8257002e-7,0.000008032763,0.000098351586],"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9991856,0.0000037302111,0.00029636797,0.00014781019,0.00014016945,0.00022632205],"domain_scores_gemma":[0.9994437,0.00003954919,0.00011143691,0.00015561987,0.0002060332,0.000043680302],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00038027074,0.000105732426,0.00022577414,0.000924592,0.00013715391,0.00004561908,0.00036377774,0.00006984457,0.000006098658],"category_scores_gemma":[0.00018182037,0.000090377296,0.000038263417,0.00065523427,0.00030426675,0.00033462714,0.00006813317,0.0001986226,4.4752383e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000032016003,0.000051203777,0.00032413795,0.00015640068,0.000090195164,0.000025241568,0.000044135802,0.5243127,0.09519176,0.00709664,0.0002749811,0.37240064],"study_design_scores_gemma":[0.00037824438,0.00009819803,0.00009186364,0.00006731727,0.000034560413,0.000028702569,0.00009212245,0.083535716,0.89914465,0.013255699,0.0031339375,0.00013900957],"about_ca_topic_score_codex":9.875913e-7,"about_ca_topic_score_gemma":0.0000010146985,"teacher_disagreement_score":0.8039529,"about_ca_system_score_codex":0.000093311035,"about_ca_system_score_gemma":0.00004521146,"threshold_uncertainty_score":0.36854792},"labels":[],"label_agreement":null},{"id":"W4411033197","doi":"10.1016/j.cirpj.2025.04.012","title":"Effects of cutting direction and average chip thicknesses on the wood and bamboo milling dust morphological characteristics","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Textile materials and evaluations","field":"Materials Science","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of New Brunswick","funders":"","keywords":"Bamboo; Materials science; Chip; Composite material; Pulp and paper industry; Engineering; Telecommunications","score_opus":0.010359602362362755,"score_gpt":0.24299882424615196,"score_spread":0.23263922188378922,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411033197","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9973748,0.0002666076,0.00019025708,0.001603508,0.00037466927,0.00009737305,0.0000016013655,0.000018284745,0.0000729096],"genre_scores_gemma":[0.99933577,0.00030226086,0.00023065934,0.00008513202,0.0000300253,0.0000031122618,6.688218e-8,0.000002792493,0.000010192217],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9991474,0.000048034206,0.000265729,0.00017811956,0.00019295746,0.00016775492],"domain_scores_gemma":[0.9991519,0.00032584558,0.00025883797,0.00010849552,0.00012265665,0.00003228369],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0013711918,0.000090817804,0.0002168031,0.00029870382,0.00042509648,0.00011585524,0.00021248679,0.00008250514,0.000011396026],"category_scores_gemma":[0.0011026376,0.00005611169,0.000013398511,0.00017969652,0.0008462379,0.00014145164,0.0001460471,0.00017363529,7.245527e-7],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000015505822,0.0000224499,0.0005592479,0.0000725573,0.0000051634483,0.00001120049,0.000116547424,0.0000079636475,0.9843519,0.0015000931,0.000009397805,0.0133280065],"study_design_scores_gemma":[0.00018011981,0.0001498555,0.055031817,0.00021502914,0.00002449271,0.00013683416,0.00013328673,0.000056925135,0.94009966,0.00383048,0.000085918124,0.0000555953],"about_ca_topic_score_codex":0.000003404424,"about_ca_topic_score_gemma":4.868352e-7,"teacher_disagreement_score":0.05447257,"about_ca_system_score_codex":0.000019045903,"about_ca_system_score_gemma":0.00005464762,"threshold_uncertainty_score":0.32695416},"labels":[],"label_agreement":null},{"id":"W4411231661","doi":"10.1016/j.cirpj.2025.05.015","title":"Optimization of clamping conditions in thin-walled part machining to minimize forced vibrations, Part I: Model for the single tool –workpiece contact location","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Clamping; Machining; Vibration; Mechanical engineering; Materials science; Engineering; Structural engineering; Acoustics; Physics","score_opus":0.011936692872436231,"score_gpt":0.25279654366496424,"score_spread":0.240859850792528,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411231661","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.06655686,0.00032902445,0.93161374,0.00095152354,0.0001965412,0.00022553414,0.000002729049,0.000039848084,0.000084198655],"genre_scores_gemma":[0.957612,0.00014653025,0.042103816,0.00007057103,0.000015638614,0.000023981647,0.0000019231297,0.000007780866,0.000017787628],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9991515,0.000006770235,0.00041549132,0.00012954252,0.00012516847,0.00017152722],"domain_scores_gemma":[0.9992603,0.00016128481,0.00016766906,0.00013006305,0.0002566724,0.000024005538],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00046563253,0.000091973525,0.0001772559,0.00057031703,0.00022376425,0.000049488557,0.00024414038,0.000071962975,0.0000021008843],"category_scores_gemma":[0.0005046815,0.00007739411,0.000021270867,0.0005823995,0.0001103707,0.00040258144,0.000032783682,0.0001570411,8.344567e-8],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000017544728,0.00001142591,0.00006551683,0.000041029154,0.000010780482,2.1438444e-7,0.00016935909,0.9889557,0.0021760832,0.0021165756,0.000027724896,0.006408097],"study_design_scores_gemma":[0.0004740788,0.000050956238,0.0001956121,0.000282671,0.000024506375,0.000006538692,0.00032851496,0.95092475,0.044647444,0.0028467951,0.00013338498,0.000084718464],"about_ca_topic_score_codex":9.639951e-7,"about_ca_topic_score_gemma":0.0000065918616,"teacher_disagreement_score":0.8910551,"about_ca_system_score_codex":0.00007652774,"about_ca_system_score_gemma":0.00011061778,"threshold_uncertainty_score":0.31560403},"labels":[],"label_agreement":null},{"id":"W4411260469","doi":"10.1016/j.cirpj.2025.05.014","title":"Optimization of clamping conditions in thin-walled part machining to minimize forced vibrations, part II: Dynamic updating of clamping force and location with position dependent dynamics","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Sandvik Coromant; Pratt and Whitney Canada","keywords":"Clamping; Vibration; Position (finance); Machining; Dynamics (music); Control theory (sociology); Structural engineering; Engineering; Mechanical engineering; Physics; Computer science; Acoustics","score_opus":0.0033715408831827775,"score_gpt":0.228295383247534,"score_spread":0.22492384236435123,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411260469","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.4909473,0.0001349873,0.50838006,0.00025981592,0.000061156075,0.0001080105,0.0000022047102,0.000024754347,0.00008171116],"genre_scores_gemma":[0.9549339,0.00017378652,0.044836134,0.000020294285,0.00000533602,0.000006858584,0.000007202181,0.000008831663,0.00000767933],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.99899906,0.000011908087,0.0004905708,0.0001642211,0.00016875891,0.00016549924],"domain_scores_gemma":[0.9992085,0.000059350306,0.00029569148,0.00011047616,0.00029180065,0.000034178607],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00039874276,0.00011021609,0.00023099463,0.0009809039,0.00021691497,0.000032246433,0.00015250225,0.000082460865,0.0000015538607],"category_scores_gemma":[0.00020041746,0.00010709274,0.000011412675,0.0007734774,0.0001584729,0.00053224206,0.00005656525,0.0001957512,2.6184388e-8],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00002349166,0.000012333752,0.0007068775,0.00012154245,0.000014407933,0.0000010302972,0.00023288061,0.98904055,0.0033894905,0.0018132817,7.0623076e-7,0.004643389],"study_design_scores_gemma":[0.0008798962,0.00018971783,0.0018253645,0.0014382683,0.000047389218,0.00006238632,0.0018554234,0.91951525,0.07158837,0.0024259607,0.000003811092,0.00016817688],"about_ca_topic_score_codex":0.000002955739,"about_ca_topic_score_gemma":0.000034776043,"teacher_disagreement_score":0.46398658,"about_ca_system_score_codex":0.0001238587,"about_ca_system_score_gemma":0.000104861676,"threshold_uncertainty_score":0.43671152},"labels":[],"label_agreement":null},{"id":"W4411405427","doi":"10.1016/j.cirpj.2025.06.010","title":"Impact of surface post-treatments on corrosion resistance in heat-treated laser-powder bed fused Nickel Aluminum Bronze","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Metallurgy and Material Science","field":"Materials Science","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Dalhousie University","funders":"Apollo; Ocean Frontier Institute; Defence Research and Development Canada; Dalhousie University; Natural Sciences and Engineering Research Council of Canada; Canada Research Chairs","keywords":"Metallurgy; Bronze; Materials science; Nickel; Aluminium; Corrosion","score_opus":0.00824910385704517,"score_gpt":0.26426448212038584,"score_spread":0.25601537826334064,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411405427","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9984825,0.00015343293,0.000013614129,0.00050605304,0.0003820547,0.00015489389,0.000008050431,0.000025642255,0.00027371643],"genre_scores_gemma":[0.9992563,0.00007462975,0.0004150176,0.00004289932,0.0000081063445,0.0000018192293,4.9774565e-7,0.000005332675,0.00019535898],"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.99811465,0.000062281826,0.0005289492,0.00038623277,0.00045594622,0.00045196578],"domain_scores_gemma":[0.9988414,0.00009044741,0.0003183647,0.00035418622,0.00029659015,0.000098977376],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0012959485,0.00019031434,0.00043256814,0.00079825876,0.00021753184,0.00007292101,0.0007848006,0.00014189395,0.00006665509],"category_scores_gemma":[0.00035276116,0.00013565777,0.000058153848,0.0008612146,0.0010721904,0.0004593336,0.00017080085,0.00019396718,0.000009347887],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00023345962,0.00013293876,0.005484674,0.000018979375,0.000006556142,0.000035561745,0.000089026675,0.00016200327,0.992966,0.00025520442,0.00003781707,0.0005778083],"study_design_scores_gemma":[0.0008158678,0.00050653063,0.06464008,0.0002435795,0.000016010978,0.000026816608,0.00008778602,0.000009439536,0.9321508,0.0013374127,0.000055453474,0.00011025557],"about_ca_topic_score_codex":0.00015015254,"about_ca_topic_score_gemma":0.000076015225,"teacher_disagreement_score":0.060815204,"about_ca_system_score_codex":0.00023453672,"about_ca_system_score_gemma":0.00039210104,"threshold_uncertainty_score":0.5531963},"labels":[],"label_agreement":null},{"id":"W4411585707","doi":"10.1016/j.cirpj.2025.06.017","title":"Look-ahead stress-oriented trajectory planning to improve the strength of fused filament fabricated parts","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":2,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"Ontario Tech University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Trajectory; Stress (linguistics); Protein filament; Materials science; Structural engineering; Engineering; Mechanical engineering; Computer science; Composite material; Physics","score_opus":0.009153242944215479,"score_gpt":0.23756246352591376,"score_spread":0.22840922058169827,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4411585707","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.9941731,0.0004347219,0.0033463934,0.00090793386,0.00039887603,0.00014379212,0.0000074193886,0.00022900073,0.00035872744],"genre_scores_gemma":[0.9989991,0.000054626664,0.0008542153,0.000028374143,0.000020346193,0.0000069996645,3.2872074e-7,0.000009208389,0.000026776816],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9986924,0.000013760603,0.000420239,0.00022867748,0.00027251468,0.00037239262],"domain_scores_gemma":[0.99908745,0.00012987149,0.00018533625,0.00036961443,0.00017127494,0.00005647006],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00054570555,0.00017811936,0.0003025281,0.0010809707,0.00021036617,0.000042448108,0.00080075976,0.00012246704,0.000005208919],"category_scores_gemma":[0.0004042083,0.00012804719,0.000043659806,0.0006360855,0.0007642604,0.00012503352,0.00025281298,0.00052060594,0.0000010642771],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000092449714,0.00018575785,0.006997507,0.00041725658,0.00043892278,0.00010231624,0.0015365863,0.01939477,0.17583485,0.004428826,0.0025651644,0.7880056],"study_design_scores_gemma":[0.0002648793,0.00014728922,0.010376959,0.00025166245,0.000024952395,0.000018530238,0.0013578364,0.00033034093,0.98367065,0.001325107,0.0021089283,0.00012288692],"about_ca_topic_score_codex":0.0000045306833,"about_ca_topic_score_gemma":0.0000018330286,"teacher_disagreement_score":0.80783576,"about_ca_system_score_codex":0.00009282181,"about_ca_system_score_gemma":0.000084581916,"threshold_uncertainty_score":0.5221613},"labels":[],"label_agreement":null},{"id":"W4416426736","doi":"10.1016/j.cirpj.2025.11.006","title":"Hybrid neural network framework for predicting tool tip dynamics via receptance coupling","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Contact Mechanics and Variational Inequalities","field":"Computer Science","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Pratt and Whitney Canada; Sandvik","keywords":"Coupling (piping); Artificial neural network; Dynamics (music); Control theory (sociology); System dynamics","score_opus":0.011388657037991216,"score_gpt":0.25632977973341203,"score_spread":0.24494112269542082,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4416426736","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.33240312,0.00027835733,0.66268396,0.0034890932,0.001004648,0.00007873114,0.0000010860776,0.00004197385,0.000019010358],"genre_scores_gemma":[0.9342508,0.000043342447,0.0653504,0.00021179141,0.000110069384,0.000005113446,2.2263586e-7,0.0000039189913,0.00002435372],"study_design_codex":"theoretical_or_conceptual","study_design_gemma":"theoretical_or_conceptual","domain_scores_codex":[0.99870104,0.00000854955,0.0003957414,0.0002630603,0.0002741967,0.00035741276],"domain_scores_gemma":[0.99863696,0.00033556228,0.00034197152,0.00026682852,0.00037315808,0.000045527886],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0015265384,0.000112025205,0.00021656815,0.0004458075,0.00049491297,0.00022290244,0.0011020479,0.00008158442,0.0000012767039],"category_scores_gemma":[0.0005843702,0.00010152975,0.000044959066,0.00048286447,0.000088999856,0.00055828,0.00030683965,0.0003498886,2.6649946e-7],"study_design_candidate":"theoretical_or_conceptual","study_design_consensus":"theoretical_or_conceptual","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.000009853974,0.000011477112,0.0005325113,0.000021270298,0.000017003902,0.00000648456,0.00005909032,0.001017767,0.00040194765,0.8891706,0.000037193153,0.10871484],"study_design_scores_gemma":[0.0001891645,0.00011894763,0.0005801022,0.0001393067,0.000010428623,0.0000832413,0.00008644811,0.48789287,0.019981885,0.49047458,0.00033639924,0.00010662884],"about_ca_topic_score_codex":0.0000025330146,"about_ca_topic_score_gemma":0.000002383236,"teacher_disagreement_score":0.60184765,"about_ca_system_score_codex":0.00012148763,"about_ca_system_score_gemma":0.0002317355,"threshold_uncertainty_score":0.41402632},"labels":[],"label_agreement":null},{"id":"W4416818757","doi":"10.1016/j.cirpj.2025.11.011","title":"Modeling multi-directional CFRP cutting mechanics with ply-constraining effect","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":1,"is_retracted":false,"has_abstract":true,"route_ca_aff":true,"route_ca_fund":true,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada; Canada Research Chairs","keywords":"Fracture mechanics; Fracture (geology); Carbon fiber reinforced polymer; Stress (linguistics); Failure mode and effects analysis; Fibre-reinforced plastic; Damage mechanics; Strain rate; Chip formation","score_opus":0.0046501296919738665,"score_gpt":0.2262442965133561,"score_spread":0.22159416682138222,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W4416818757","genre_codex":"methods","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":null,"domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.37714475,0.0004130288,0.6217727,0.0000884575,0.0001869157,0.000041895026,2.5775805e-7,0.00011324199,0.0002387746],"genre_scores_gemma":[0.9588536,0.00009559883,0.040998477,0.000016501068,0.000017313952,0.0000020568102,1.3469908e-7,0.000008237814,0.000008083372],"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","domain_scores_codex":[0.9992711,0.0000047545964,0.00020303066,0.00014217738,0.00016343684,0.00021550016],"domain_scores_gemma":[0.9996186,0.000040340557,0.000069084555,0.00008084005,0.00015211708,0.00003904362],"candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004702686,0.00011016379,0.00017215798,0.0006537031,0.00024908778,0.00005284064,0.00020602053,0.0000719144,0.0000014168078],"category_scores_gemma":[0.00015930961,0.0000883736,0.000016245367,0.0004361076,0.00013146999,0.00033108582,0.000044653712,0.0003425447,2.3627332e-7],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00000950402,0.000005473886,0.00015409371,0.000055998913,0.000022283295,0.000008902715,0.00005218495,0.90456283,0.0030903046,0.0006401419,0.0000016288267,0.09139665],"study_design_scores_gemma":[0.00059200317,0.0001167625,0.000038097627,0.00029946002,0.000027976748,0.00027253397,0.00024717915,0.84499735,0.15126733,0.0019145042,0.00009503663,0.00013179127],"about_ca_topic_score_codex":9.55771e-7,"about_ca_topic_score_gemma":0.0000014191928,"teacher_disagreement_score":0.58170885,"about_ca_system_score_codex":0.0000624062,"about_ca_system_score_gemma":0.00008484667,"threshold_uncertainty_score":0.36037707},"labels":[],"label_agreement":null},{"id":"W7114896510","doi":"10.1016/j.cirpj.2025.12.003","title":"Reviewers for CIRP journal of manufacturing science and technology, 2025","year":2025,"lang":"en","type":"article","venue":"CIRP journal of manufacturing science and technology","topic":"Academic Publishing and Open Access","field":"Decision Sciences","cited_by":0,"is_retracted":false,"has_abstract":false,"route_ca_aff":true,"route_ca_fund":false,"route_ca_venue":false,"route_about_ca":false,"ca_institutions":"University of British Columbia","funders":"","keywords":"Computer-integrated manufacturing; Manufacturing; Advanced manufacturing","score_opus":0.03793708510992642,"score_gpt":0.37575634193248664,"score_spread":0.3378192568225602,"validation_status":"score_only:v0-immature-baseline","prediction":{"id":"W7114896510","genre_codex":"empirical","genre_gemma":"empirical","domain_codex":null,"domain_gemma":null,"model_version":"codex-gemma-dda1882f352a","genre_candidate":"empirical","genre_consensus":"empirical","domain_candidate":null,"domain_consensus":null,"prediction_status":"machine_predicted_unvalidated","genre_scores_codex":[0.96001595,0.005600053,0.0027509986,0.028745871,0.0016747655,0.0002744558,0.0000037029465,0.000033926317,0.0009002919],"genre_scores_gemma":[0.99443877,0.001168796,0.0036008784,0.00037907774,0.00010347142,0.000004151113,6.217491e-8,0.000008526753,0.00029625258],"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","domain_scores_codex":[0.9942997,0.000055040215,0.0017115686,0.00071547786,0.0024452987,0.00077289593],"domain_scores_gemma":[0.99203074,0.00074667146,0.002062714,0.000684876,0.004206355,0.0002686681],"candidate_categories":["metaresearch","sts","scholarly_communication","open_science"],"consensus_categories":[],"category_scores_codex":[0.027348846,0.00026823944,0.0008851627,0.008990066,0.0012428104,0.001374822,0.007198146,0.00036599435,0.000013467995],"category_scores_gemma":[0.03274342,0.00018598637,0.00010326944,0.0046189018,0.00644016,0.0039230394,0.001397605,0.0013721093,0.0000024892963],"study_design_candidate":"design_other","study_design_consensus":null,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_system_candidate":false,"about_ca_system_consensus":false,"study_design_scores_codex":[0.00006268485,0.000052494644,0.0069908244,0.000076880824,0.00004955557,0.000045564397,0.00018045511,0.00003146354,0.010687805,0.005310321,0.011319879,0.9651921],"study_design_scores_gemma":[0.0013200868,0.00040957,0.007483953,0.0007750029,0.00009263705,0.0015838305,0.0036387136,0.000112298396,0.6890177,0.19556335,0.09966058,0.00034226818],"about_ca_topic_score_codex":0.0000044023745,"about_ca_topic_score_gemma":0.00000237737,"teacher_disagreement_score":0.9648498,"about_ca_system_score_codex":0.00026491252,"about_ca_system_score_gemma":0.0021449977,"threshold_uncertainty_score":0.99966186},"labels":[],"label_agreement":null}]}