{"meta":{"page":1,"per_page":50,"max_per_page":100,"total":1448,"total_is_capped":false,"direct_labels_cover":5,"predictions_cover":1448,"direct_label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline (scores rank; they never assert a category)","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"query_hash":"942886198e6a","filters":{"topic":"Additive Manufacturing and 3D Printing Technologies"}},"results":[{"id":"W2021883569","doi":"10.1108/13552540810862028","title":"Effect of processing conditions on the bonding quality of FDM polymer filaments","year":2008,"lang":"en","type":"article","venue":"Rapid Prototyping Journal","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":1227,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Calgary; Ontario Tech University; Jacobs (Canada)","funders":"","keywords":"Materials science; Polymer; Composite material; Fused deposition modeling; Deposition (geology); Fused filament fabrication; Creep; Fabrication; Deformation (meteorology); Work (physics); Protein filament; Sintering; 3D printing; Mechanical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.03174830961938751,"gpt":0.2886767624871424,"spread":0.2569284528677549,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007749111,0.0001370915,0.0002520528,0.0001403883,0.0002841383,0.00001572921,0.000218477,0.00006472068,0.0000808198],"category_scores_gemma":[0.0002546422,0.00009093934,0.0001148727,0.0001343503,0.0001611979,0.00008047199,0.00003019899,0.0004499776,0.000004006825],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000034026,"about_ca_system_score_gemma":0.00001969531,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002778108,"about_ca_topic_score_gemma":6.672686e-8,"domain_scores_codex":[0.9990005,0.0001412324,0.0003652452,0.0000878301,0.0002099436,0.00019528],"domain_scores_gemma":[0.9991846,0.000359203,0.0002164629,0.000169567,0.00004227222,0.00002791519],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0009896415,0.0004111124,0.02733156,0.005617743,0.001602522,0.0000754978,0.006140269,0.00526492,0.2813893,0.010834,0.008830512,0.6515129],"study_design_scores_gemma":[0.0003163097,0.0002292979,0.007756655,0.0005773329,0.00001300381,0.00005443404,0.00006517157,0.0002474791,0.9898981,0.0003373736,0.0003909426,0.000113868],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9966506,0.0004615176,0.000816053,0.0001062058,0.00009458678,0.0003804941,0.000008425431,0.0001615865,0.001320572],"genre_scores_gemma":[0.9995713,0.00006681821,0.0001990986,0.00001124234,0.00004954774,0.00004875824,0.000001246076,0.00001855636,0.00003346788],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7085088,"threshold_uncertainty_score":0.3708399,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2043658412","doi":"10.1016/s1526-6125(04)70071-7","title":"Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process","year":2004,"lang":"en","type":"article","venue":"Journal of Manufacturing Processes","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":737,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Calgary","funders":"Natural Sciences and Engineering Research Council of Canada; Zhejiang University; University of Calgary","keywords":"Fused deposition modeling; Materials science; Acrylonitrile butadiene styrene; Deposition (geology); Polymer; Composite material; Fused filament fabrication; Process (computing); Protein filament; Thermal; 3D printing; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.02431885060201534,"gpt":0.2458718730015429,"spread":0.2215530223995275,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003239304,0.0001751661,0.0002666858,0.0003172874,0.00007134373,0.00005078913,0.0003955835,0.00009830924,0.000001739355],"category_scores_gemma":[0.00008441722,0.0001286731,0.00006348918,0.0001549323,0.00002334371,0.000613169,0.00002849219,0.0004103372,0.000001042292],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000767157,"about_ca_system_score_gemma":0.00004161019,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001817945,"about_ca_topic_score_gemma":0.000009704118,"domain_scores_codex":[0.9986777,0.00001477329,0.0006324482,0.00009884852,0.0003528032,0.0002234047],"domain_scores_gemma":[0.9994669,0.00006069638,0.0002067885,0.0001331671,0.0001058438,0.00002658535],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001518433,0.00002797689,0.00005722619,0.0007292117,0.00002954632,0.000006707081,0.001762206,0.9930521,0.0001994348,0.000004256214,0.000003071328,0.004113035],"study_design_scores_gemma":[0.0005345952,0.00006520955,0.0001740379,0.0007951655,0.00004012836,0.00004866367,0.001675146,0.02329849,0.9691135,0.004092669,0.000003056772,0.00015937],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8980668,0.0004198898,0.1010565,0.0001101938,0.00005144847,0.0000979221,0.000003665976,0.00008231686,0.0001113235],"genre_scores_gemma":[0.9984905,0.0001280169,0.001254819,0.00001243133,0.00008123277,0.000006553409,0.000003973057,0.00002154372,9.509722e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.9697537,"threshold_uncertainty_score":0.5247138,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3022580245","doi":"10.1002/advs.201902307","title":"Multi‐Material 3D and 4D Printing: A Survey","year":2020,"lang":"en","type":"review","venue":"Advanced Science","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":632,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"3D printing; Computer science; Process (computing); Dimension (graph theory); Three dimensional printing; Manufacturing engineering; 3d printed; Computer-aided technologies; Emerging technologies; Nanotechnology; Systems engineering; Engineering; Mechanical engineering; Materials science; Artificial intelligence","retraction":null,"screen_n_in":null,"score":{"opus":0.05097390265259097,"gpt":0.3092461352628683,"spread":0.2582722326102773,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0003653409,0.0003230772,0.0007004797,0.0001572833,0.0001871534,0.0001639187,0.0006680659,0.0001173794,0.000007492057],"category_scores_gemma":[0.0008295168,0.0002730585,0.0000541525,0.0005047747,0.0005891344,0.0001708268,0.0004932901,0.0003662563,0.00002721622],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007101151,"about_ca_system_score_gemma":0.00008077075,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000055613,"about_ca_topic_score_gemma":0.000003879705,"domain_scores_codex":[0.9986057,0.00003064131,0.0002741426,0.0005360166,0.0001683804,0.0003851278],"domain_scores_gemma":[0.9992975,0.0001482127,0.00009332792,0.0003422275,0.0000322499,0.00008648237],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[4.307423e-7,0.00000211249,0.000002190732,0.001236457,0.000007462684,0.000005560297,0.00001587027,0.00004084172,0.00003565815,0.00002393494,0.000006267154,0.9986232],"study_design_scores_gemma":[0.00007190843,0.00001932828,0.0001902032,0.001864386,0.00002817484,0.00001934559,0.000008326293,0.0009733834,0.001174277,0.00002976778,0.9951174,0.0005035404],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.000736676,0.9912618,0.004956573,0.000004513401,0.0007395775,0.00037327,0.00009304674,0.001641343,0.0001931368],"genre_scores_gemma":[0.001840548,0.9615467,0.03646288,0.000003662757,0.000038969,0.00003562777,0.00001224814,0.00004077894,0.000018581],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9981197,"threshold_uncertainty_score":0.9999722,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2346885928","doi":"10.1002/adma.201506215","title":"Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications","year":2016,"lang":"en","type":"article","venue":"Advanced Materials","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":600,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Nanocomposite; 3D printing; Nanotechnology; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.008428566308584486,"gpt":0.2179481817074867,"spread":0.2095196153989022,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001021876,0.0001264224,0.0001624824,0.00007581077,0.00005531055,0.00001028899,0.00009197344,0.00006082889,0.00005260507],"category_scores_gemma":[0.00002235268,0.00009312446,0.00002001789,0.00002482173,0.00008838406,0.0001076388,0.0001031127,0.00003836815,0.000009004087],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000272238,"about_ca_system_score_gemma":0.000003686873,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003217265,"about_ca_topic_score_gemma":0.000001193302,"domain_scores_codex":[0.9993693,0.000005670146,0.0002177795,0.0001668412,0.00009224567,0.0001481889],"domain_scores_gemma":[0.999595,0.0001121462,0.00006407459,0.0001730766,0.00003453398,0.000021134],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000006857089,0.000005209835,0.00004423374,0.00005781019,0.00001424047,6.54126e-7,0.000003125705,0.00006426161,0.8045895,0.0006715337,0.00001485828,0.1945277],"study_design_scores_gemma":[0.0001527273,0.00001424056,0.00157486,0.0001213697,0.000005117434,0.00001036143,0.000004189303,0.00000562388,0.986806,0.004896235,0.006285667,0.0001235951],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9615927,0.00007493018,0.03662226,0.00003570014,0.00009320071,0.0002477286,0.00004936902,0.001001468,0.0002825968],"genre_scores_gemma":[0.9572909,0.00004304008,0.0424244,0.000003573828,0.0000606057,0.0001302912,0.000004058767,0.00002154306,0.00002153985],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1944041,"threshold_uncertainty_score":0.3797505,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2942580786","doi":"10.1126/sciadv.aav5790","title":"Grayscale digital light processing 3D printing for highly functionally graded materials","year":2019,"lang":"en","type":"article","venue":"Science Advances","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":539,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Surrey Memorial Hospital","funders":"Air Force Office of Scientific Research; National Natural Science Foundation of China; National Science Foundation","keywords":"Grayscale; Digital Light Processing; Computer science; Computer graphics (images); Digital printing; 3D printing; Computer vision; Materials science; Artificial intelligence; Engineering drawing; Composite material; Engineering; Image (mathematics)","retraction":null,"screen_n_in":null,"score":{"opus":0.00816269502717379,"gpt":0.2228162575712056,"spread":0.2146535625440318,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001754415,0.000132421,0.0001371131,0.0001274268,0.0002031754,0.0002721311,0.0003603178,0.00003618116,0.00001650817],"category_scores_gemma":[0.0001631091,0.0001111142,0.00002744893,0.0002525531,0.0001808169,0.001293162,0.00008652209,0.00006940169,0.00005161967],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004645094,"about_ca_system_score_gemma":0.0000371917,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":3.347296e-7,"about_ca_topic_score_gemma":5.868196e-7,"domain_scores_codex":[0.9989637,0.000002260857,0.0001657657,0.0003018215,0.0002067501,0.000359729],"domain_scores_gemma":[0.9996192,0.00005813531,0.00005643353,0.0001682209,0.0000659102,0.00003210883],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001379867,0.00002074046,0.001324514,0.0004319358,0.00001105766,0.000001270355,0.0001794734,0.004148605,0.6017044,0.001363358,0.00008553611,0.3907153],"study_design_scores_gemma":[0.0001269392,0.00003764979,0.001773112,0.00009198844,0.000002961826,0.000004377358,0.0001737805,0.0004233248,0.9690776,0.004403278,0.02366743,0.0002175658],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9887477,0.0002181046,0.00627375,0.00009613733,0.0008606726,0.0002280391,0.00001317778,0.001095177,0.002467275],"genre_scores_gemma":[0.9903742,0.000007809655,0.009166005,0.00001070035,0.00007670679,0.0000345902,0.000004430107,0.00001596493,0.0003096086],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3904977,"threshold_uncertainty_score":0.4531104,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3209394607","doi":"10.1016/j.jmrt.2021.10.108","title":"A review on voids of 3D printed parts by fused filament fabrication","year":2021,"lang":"en","type":"review","venue":"Journal of Materials Research and Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":423,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of British Columbia","funders":"Qilu University of Technology; Shandong Academy of Sciences","keywords":"Fabrication; Fused filament fabrication; Materials science; Void (composites); 3D printing; Rapid prototyping; Nanotechnology; Porosity; Fused deposition modeling; Limiting; Mechanical engineering; Computer science; Composite material; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.07556997946825016,"gpt":0.3664333739426549,"spread":0.2908633944744047,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001282119,0.0002423493,0.001690638,0.000830234,0.00004275687,0.00003303663,0.0004861252,0.0004390962,0.00009296526],"category_scores_gemma":[0.00136061,0.0001776487,0.00009172093,0.0004936512,0.0002378115,0.00003367091,0.0002554413,0.0008877374,0.0000101112],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001053422,"about_ca_system_score_gemma":0.00008252796,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001584868,"about_ca_topic_score_gemma":1.994037e-7,"domain_scores_codex":[0.9980609,0.000205768,0.000941112,0.0002013841,0.0002779976,0.0003128347],"domain_scores_gemma":[0.9984565,0.0002491974,0.0004500955,0.0004174024,0.000379411,0.00004739313],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000004437639,0.00005473215,2.429183e-7,0.03100071,0.0002137186,0.00002822475,0.00000325985,4.312572e-7,0.000738371,0.0002244318,0.02553168,0.9421998],"study_design_scores_gemma":[0.0001029092,0.0003639666,4.337837e-7,0.06502076,0.00007274873,0.0001074302,0.00001332994,5.185777e-7,0.06768297,0.0003639338,0.8661405,0.0001304748],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.001163796,0.9977985,0.00006475369,0.0002209716,0.0001622493,0.0003570738,0.00006859097,0.0001107425,0.00005331472],"genre_scores_gemma":[0.001347499,0.9981005,0.0003380701,0.000004537584,0.0000508311,0.00005456133,0.00002623063,0.00003440747,0.00004331941],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9420693,"threshold_uncertainty_score":0.7244303,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3116495124","doi":"10.1016/j.actbio.2020.12.044","title":"3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications","year":2020,"lang":"en","type":"review","venue":"Acta Biomaterialia","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":418,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"3D printing; Dentistry; 3d printed; Drill; Three dimensional printing; Materials science; Medicine; Engineering; Biomedical engineering; Mechanical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.02606042024839025,"gpt":0.2643949768635161,"spread":0.2383345566151258,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002941992,0.00049047,0.001188069,0.000286674,0.000117024,0.0004359258,0.0001940152,0.00046336,0.00001570186],"category_scores_gemma":[0.00008747296,0.000475966,0.00004994448,0.0001761061,0.0001766121,0.0001047,0.0006180654,0.0001994845,0.000005732041],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004269427,"about_ca_system_score_gemma":0.0000252571,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000051429,"about_ca_topic_score_gemma":0.000002505667,"domain_scores_codex":[0.9983372,0.00005082423,0.0006385269,0.0005406949,0.00008480938,0.0003479397],"domain_scores_gemma":[0.9993883,0.0000520968,0.0002082349,0.0002730066,0.00001160396,0.00006675298],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000001472172,0.000005092094,0.00004595981,0.01271224,0.00005388024,0.00003312703,0.00002026617,9.948463e-9,0.001644338,0.0001404937,0.00003268301,0.9853104],"study_design_scores_gemma":[0.00005396711,0.00000619058,0.0002661998,0.002830145,0.00009918329,0.0002244911,0.00001331051,0.000004385009,0.01344221,0.00007471757,0.9824457,0.0005394988],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0917047,0.899847,0.0006192548,0.0000526974,0.00121496,0.002116405,0.0005204176,0.003820919,0.0001036368],"genre_scores_gemma":[0.01633783,0.978842,0.004050821,0.000004167566,0.0001543878,0.000365121,0.0001269272,0.0001106956,0.000008040312],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.984771,"threshold_uncertainty_score":0.9997692,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2040806210","doi":"10.1007/s00170-015-6994-5","title":"Additive manufacturing-enabled design theory and methodology: a critical review","year":2015,"lang":"en","type":"review","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":353,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Design for manufacturability; Computer science; Engineering design process; Process (computing); Product design; Set (abstract data type); Designtheory; Manufacturing engineering; Iterative design; Systems engineering; Industrial engineering; Product (mathematics); Engineering; Mathematics; Operations management; Mechanical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.09233143927701648,"gpt":0.3648294894551886,"spread":0.2724980501781721,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow","research_integrity"],"consensus_categories":[],"category_scores_codex":[0.003389034,0.0007742885,0.002254382,0.001059211,0.0001160259,0.00007706294,0.002779767,0.0006403641,0.0000737886],"category_scores_gemma":[0.003533137,0.0005130415,0.0004158594,0.0001600414,0.0007294866,0.0002487179,0.0008739246,0.002574452,0.00003217971],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0004232733,"about_ca_system_score_gemma":0.0001543038,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":9.203176e-7,"about_ca_topic_score_gemma":6.048123e-7,"domain_scores_codex":[0.9965765,0.0005907515,0.001316888,0.0004391884,0.0005269079,0.0005497336],"domain_scores_gemma":[0.9937904,0.004246667,0.0008461284,0.0006726497,0.000326225,0.0001179086],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.00004189662,0.00001688511,1.934189e-8,0.002580131,0.0008437555,0.0002414733,0.00002624252,0.0001991493,0.000004548124,0.002330347,0.003097501,0.9906181],"study_design_scores_gemma":[0.0002771121,0.000140953,6.025368e-7,0.01871629,0.0008325307,0.003465931,0.0001222637,0.000006568458,0.02133343,0.1183564,0.8362411,0.0005068167],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00007592684,0.9647002,0.03141865,0.0008336763,0.001511027,0.0005478085,0.00005538952,0.0006869446,0.0001703336],"genre_scores_gemma":[0.0002862108,0.9742371,0.02477964,0.0001230956,0.0002767919,0.00009707326,0.00001094587,0.0001218714,0.00006720001],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9901112,"threshold_uncertainty_score":0.9997321,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2068507382","doi":"10.1007/s00170-014-5835-2","title":"Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)","year":2014,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":347,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Sheridan College","funders":"","keywords":"Raster graphics; Ultimate tensile strength; Process (computing); Orientation (vector space); Process variable; Differential evolution; Response surface methodology; Air gap (plumbing); Design of experiments; Group method of data handling; Fused deposition modeling; Raster data; Materials science; Mechanical engineering; Structural engineering; Computer science; Mathematics; Engineering; Algorithm; Composite material; Geometry; Artificial intelligence; 3D printing; Statistics; Machine learning","retraction":null,"screen_n_in":null,"score":{"opus":0.02001712045236692,"gpt":0.2716361348650239,"spread":0.251619014412657,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003867552,0.0001490907,0.0001852354,0.000312559,0.0001328637,0.00006851365,0.0004790603,0.0001420805,0.000001284858],"category_scores_gemma":[0.0002191754,0.0001227502,0.00003005975,0.00004482797,0.00008144367,0.000346604,0.0001734218,0.0003075933,6.561021e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001055413,"about_ca_system_score_gemma":0.00000896419,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006666354,"about_ca_topic_score_gemma":0.000002271761,"domain_scores_codex":[0.9991344,0.00002554929,0.0003190081,0.0001956976,0.0001485909,0.0001767558],"domain_scores_gemma":[0.9992069,0.0002319285,0.0002253795,0.000200996,0.000109473,0.00002533541],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00006966329,0.00001013254,0.00004722862,0.00003735948,0.00009446545,9.936938e-7,0.00005523332,0.9296488,0.008494206,0.0003820809,0.000003293315,0.0611566],"study_design_scores_gemma":[0.000510344,0.00006161704,0.00009568917,0.0001194718,0.00005674563,0.0001679629,0.00008659423,0.819523,0.1522675,0.02697749,0.00003889304,0.00009466567],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.4584968,0.00007790882,0.5408576,0.000146825,0.000198384,0.00007790313,0.000008176051,0.000134728,0.000001719281],"genre_scores_gemma":[0.6625344,0.0001216793,0.3372019,0.000007413761,0.00009998264,0.000005727642,0.00001061993,0.00001742646,8.308842e-7],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.2040376,"threshold_uncertainty_score":0.5005608,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2763986224","doi":"10.3390/jmmp1020013","title":"Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review","year":2017,"lang":"en","type":"review","venue":"Journal of Manufacturing and Materials Processing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":340,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Orthopedic surgery; Computer science; Biomedical engineering; Mechanical engineering; Engineering; Nanotechnology; Materials science; Medicine; Surgery","retraction":null,"screen_n_in":null,"score":{"opus":0.04277555881359094,"gpt":0.3105080383468631,"spread":0.2677324795332721,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0008274615,0.0006153436,0.002599356,0.0005482454,0.0001845277,0.0002228033,0.0004429019,0.0003566519,0.00003686185],"category_scores_gemma":[0.0001384425,0.0004648531,0.0001400856,0.00005101145,0.0001797828,0.000356348,0.0002251914,0.0005422071,0.000001264745],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007088525,"about_ca_system_score_gemma":0.00009217107,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001031595,"about_ca_topic_score_gemma":0.000002376422,"domain_scores_codex":[0.9972966,0.0001198102,0.001618262,0.0003436474,0.0002668789,0.0003547422],"domain_scores_gemma":[0.99735,0.0002287768,0.001943904,0.0003174378,0.00006910277,0.00009074861],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001074414,0.00001126922,2.330745e-7,0.08777409,0.0001567592,0.00002928344,0.00004314485,0.000001514489,0.00007078819,0.00001613374,0.00004952792,0.9118365],"study_design_scores_gemma":[0.0006786104,0.0001054653,0.0006657491,0.1729102,0.001811977,0.00205696,0.0001239473,5.363781e-7,0.4482267,0.00282389,0.3693921,0.001203805],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.04020507,0.9583242,0.0001410296,0.00001328357,0.0003406164,0.0005705783,0.0002537377,0.0001021062,0.00004939325],"genre_scores_gemma":[0.04142185,0.9572424,0.0008760229,0.000008995153,0.0002496095,0.00005284272,0.00005330151,0.00007841309,0.00001652309],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9106327,"threshold_uncertainty_score":0.9997803,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2889947847","doi":"10.1016/j.carbpol.2018.09.027","title":"3D printing using plant-derived cellulose and its derivatives: A review","year":2018,"lang":"en","type":"review","venue":"Carbohydrate Polymers","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":332,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"FPInnovations; University of New Brunswick","funders":"Canada Research Chairs","keywords":"Cellulose; Microcrystalline cellulose; 3D printing; Polymer science; 3d printed; Polymer; Materials science; Chemical engineering; Organic chemistry; Chemistry; Engineering; Composite material; Manufacturing engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.04976041466546831,"gpt":0.2776334006185246,"spread":0.2278729859530563,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002184882,0.0008094332,0.00171439,0.0003321129,0.0001338974,0.00006823774,0.0004422757,0.0004121118,0.00006860712],"category_scores_gemma":[0.0001766424,0.0007233568,0.0002683567,0.0004025774,0.0001865897,0.0001125369,0.0003648409,0.0006552575,0.00005456214],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000128375,"about_ca_system_score_gemma":0.00007180058,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000008396993,"about_ca_topic_score_gemma":6.574996e-7,"domain_scores_codex":[0.9978094,0.0001147573,0.0006814642,0.0006060202,0.0001615971,0.0006267297],"domain_scores_gemma":[0.9988719,0.0001663715,0.0003118745,0.0004866745,0.00003718965,0.0001260062],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000001102167,0.000009268489,4.6383e-7,0.1234984,0.0006120653,0.00005755006,0.0001352299,0.00000668855,0.0003264266,0.0000604444,0.0003466072,0.8749458],"study_design_scores_gemma":[0.0001322199,0.00003269009,9.432357e-7,0.1429975,0.001388489,0.0001040467,0.00004314912,0.001929898,0.008850363,0.00001893674,0.8428062,0.001695587],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0009402786,0.9956169,0.000186836,0.000007308599,0.0004189202,0.0006895131,0.00008573451,0.001163805,0.0008906639],"genre_scores_gemma":[0.0004421845,0.9982847,0.0006756834,0.00002816143,0.0001743807,0.00007715727,0.0000697731,0.0001799967,0.00006794368],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.8732502,"threshold_uncertainty_score":0.9995217,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2277674528","doi":"10.1108/rpj-07-2014-0083","title":"An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments","year":2016,"lang":"en","type":"article","venue":"Rapid Prototyping Journal","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":292,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"University of British Columbia; National Science Foundation","keywords":"Fused deposition modeling; Taguchi methods; Ultimate tensile strength; Materials science; Polylactic acid; Ductility (Earth science); Design of experiments; 3D printing; Composite material; Polymer; Creep; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.03640125577715948,"gpt":0.2411785120396978,"spread":0.2047772562625383,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003253244,0.0001328613,0.0001941836,0.0001251568,0.00008217237,0.00001902058,0.0001673508,0.00009062354,0.000009600532],"category_scores_gemma":[0.00003967388,0.00007415772,0.00004422049,0.00006407926,0.00003290428,0.0002513384,0.00001348756,0.0001210298,1.533704e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005059455,"about_ca_system_score_gemma":0.00002343072,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001233988,"about_ca_topic_score_gemma":3.071531e-8,"domain_scores_codex":[0.9991918,0.00005467971,0.0002947492,0.0001338686,0.000139419,0.0001855494],"domain_scores_gemma":[0.9995156,0.00002797076,0.0001364701,0.0001614817,0.0001165106,0.00004197627],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.0004092873,0.00007361095,0.000007245433,0.0001265391,0.00008791783,5.764157e-7,0.0001165382,0.6408173,0.2828974,0.00003189042,0.000002346573,0.07542934],"study_design_scores_gemma":[0.000422438,0.000293713,0.000002008607,0.0001413072,0.00001297271,0.00002208477,0.00003753893,0.5167695,0.4821124,0.0001121039,6.627922e-7,0.00007333399],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.01606892,0.00008904027,0.9827206,0.00001432098,0.00003044569,0.0008861251,0.000002224538,0.0001702936,0.00001798852],"genre_scores_gemma":[0.596,0.00002679259,0.4038052,0.00000124266,0.00002283711,0.0001194583,0.000001407336,0.00002235384,7.545621e-7],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.579931,"threshold_uncertainty_score":0.3024064,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2002836284","doi":"10.1016/s1526-6125(02)70139-4","title":"Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties","year":2002,"lang":"en","type":"article","venue":"Journal of Manufacturing Processes","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":284,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Calgary","funders":"","keywords":"Fused deposition modeling; Fabrication; Materials science; Composite number; Deposition (geology); Mechanical engineering; 3D printing; Composite material; Engineering drawing; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.02306482064658729,"gpt":0.207850733167555,"spread":0.1847859125209677,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001579127,0.0001545249,0.0004881602,0.0003303336,0.00006174621,0.00004460616,0.0001586342,0.00005591949,0.000005192159],"category_scores_gemma":[0.0001334514,0.0001016857,0.00008192599,0.0001307048,0.00005554273,0.0001801167,0.00002001642,0.0001405945,2.596694e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001920294,"about_ca_system_score_gemma":0.00001154399,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002399423,"about_ca_topic_score_gemma":0.000002399269,"domain_scores_codex":[0.9991632,0.00001076212,0.0004083163,0.0001070483,0.0001657691,0.0001449177],"domain_scores_gemma":[0.9991892,0.0001034734,0.0002572735,0.0001029739,0.0003146306,0.00003247867],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0004171628,0.0000721695,0.0005991204,0.001948062,0.001552318,0.000004299177,0.0004812779,0.9842598,0.0006972589,0.000004585886,0.00001720224,0.009946739],"study_design_scores_gemma":[0.001854525,0.0003197613,0.001182816,0.000408225,0.0006749167,0.00003450784,0.0001971939,0.1122894,0.8822865,0.0003926072,0.0001289579,0.0002306083],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.778358,0.001159468,0.2199548,0.00006618151,0.00001897966,0.0002973588,0.000003058594,0.00009065078,0.00005141443],"genre_scores_gemma":[0.9921421,0.0003165188,0.007422904,0.000004887563,0.00003520371,0.00003772561,8.433592e-7,0.00001872278,0.00002102545],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8815892,"threshold_uncertainty_score":0.4146621,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3037146998","doi":"10.3390/mi11070633","title":"Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review","year":2020,"lang":"en","type":"review","venue":"Micromachines","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":272,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Motion planning; Path (computing); Process (computing); Computer science; Subtractive color; Quality (philosophy); Benchmark (surveying); Industrial engineering; Manufacturing engineering; Engineering; Artificial intelligence","retraction":null,"screen_n_in":null,"score":{"opus":0.04284914536003061,"gpt":0.3215402019546726,"spread":0.2786910565946421,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002494431,0.0008995599,0.002415811,0.0003017466,0.00007212356,0.0003404948,0.0005695862,0.000336477,0.00009398821],"category_scores_gemma":[0.0003654875,0.0007616393,0.0002314993,0.0002033757,0.00007126615,0.0002606019,0.0006622425,0.0007896895,0.0001044352],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001038033,"about_ca_system_score_gemma":0.00004822575,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00008167658,"about_ca_topic_score_gemma":0.000007396972,"domain_scores_codex":[0.9975802,0.0001863898,0.0008929002,0.000692633,0.0001571921,0.0004906992],"domain_scores_gemma":[0.9985785,0.0006073122,0.0002233626,0.0004544352,0.00001830828,0.0001180697],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.00001268018,0.00001765567,0.000001787726,0.04990784,0.0002375171,0.0002551394,0.0001689537,0.00009752773,0.00005090454,0.00002387942,0.007768728,0.9414574],"study_design_scores_gemma":[0.0001330673,0.00003845475,0.00007570416,0.05752413,0.0001936767,0.00007481736,0.00002495703,0.00002361544,0.0007814675,0.00006795753,0.9400643,0.0009978156],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.002332672,0.9931282,0.0001169378,0.00005379651,0.0001983602,0.001105954,0.001577175,0.001299135,0.0001877307],"genre_scores_gemma":[0.000271782,0.9949272,0.003700476,0.00007198277,0.0001480137,0.0001781992,0.0005117846,0.000146535,0.00004401178],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9404595,"threshold_uncertainty_score":0.9994835,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2801723236","doi":"10.1021/acsomega.8b00129","title":"Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)","year":2018,"lang":"en","type":"article","venue":"ACS Omega","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":259,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"Natural Sciences and Engineering Research Council of Canada; Ontario Ministry of Agriculture, Food and Rural Affairs; University of Guelph","keywords":"Materials science; Fused deposition modeling; Composite material; Heat deflection temperature; Scanning electron microscope; Differential scanning calorimetry; Izod impact strength test; Annealing (glass); Polylactic acid; Dynamic mechanical analysis; Lactic acid; Atmospheric temperature range; 3D printing; Polymer; Ultimate tensile strength","retraction":null,"screen_n_in":null,"score":{"opus":0.01866230848631337,"gpt":0.2235424693391546,"spread":0.2048801608528413,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001094178,0.0001696252,0.0001919981,0.0001191559,0.0001990007,0.0000472533,0.0001282727,0.00009647258,7.978271e-7],"category_scores_gemma":[0.0001279216,0.0001091035,0.00002165017,0.000152498,0.0001703338,0.0002888798,0.0001070377,0.0002471097,1.223391e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004143317,"about_ca_system_score_gemma":0.00001863283,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00009476514,"about_ca_topic_score_gemma":0.00004687794,"domain_scores_codex":[0.9992077,0.00002515016,0.000258951,0.0001908427,0.0001195463,0.0001977835],"domain_scores_gemma":[0.9995,0.00005711617,0.00008663115,0.0002331878,0.00009483671,0.00002826235],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.0005286488,0.00009573535,0.006010185,0.003823041,0.0004095996,0.000006203033,0.008915722,0.05610844,0.6370762,0.0004545803,0.00002596193,0.2865457],"study_design_scores_gemma":[0.000235504,0.00003495194,0.003082629,0.0002471507,0.0000269775,0.00001007375,0.0002991249,0.5760579,0.4191558,0.0007197969,6.202447e-7,0.0001294789],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9750626,0.002456086,0.02194239,0.00001906721,0.00003363815,0.0001476664,0.00001483699,0.0002245191,0.00009920779],"genre_scores_gemma":[0.9956062,0.00004592895,0.0042606,0.000001580276,0.00003610703,0.000006602492,0.000003451242,0.00002842291,0.0000110425],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5199495,"threshold_uncertainty_score":0.4449113,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2103417572","doi":"10.1155/2014/598531","title":"Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process","year":2014,"lang":"en","type":"article","venue":"International Journal of Manufacturing Engineering","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":250,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Sheridan College","funders":"","keywords":"Raster graphics; Process (computing); Ultimate tensile strength; Deposition (geology); Design of experiments; Fused deposition modeling; Mechanical engineering; Characterization (materials science); Process engineering; Process variable; Computer science; Process optimization; Materials science; Engineering drawing; Mathematics; Engineering; Composite material; 3D printing; Nanotechnology; Artificial intelligence","retraction":null,"screen_n_in":null,"score":{"opus":0.009682487009971109,"gpt":0.1894085858290313,"spread":0.1797260988190602,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002200159,0.0001461265,0.0002134581,0.0001736045,0.00002582267,0.00003454958,0.0002868921,0.00007962356,0.000004365882],"category_scores_gemma":[0.00005807839,0.0001111363,0.00005749701,0.00003445691,0.00003437021,0.000215906,0.00004158171,0.0002065692,1.806376e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003282518,"about_ca_system_score_gemma":0.000005402714,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003799574,"about_ca_topic_score_gemma":2.615886e-7,"domain_scores_codex":[0.9990192,0.0000139378,0.0004605233,0.00009202303,0.0002981117,0.0001162059],"domain_scores_gemma":[0.9994163,0.00006049537,0.0002610567,0.0001014172,0.0001319841,0.00002873295],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000214652,0.00001185595,0.000006513597,0.0001098357,0.00009327134,8.090812e-7,0.0001602981,0.9242718,0.07006908,0.00004395154,0.00000468855,0.00520648],"study_design_scores_gemma":[0.0001645494,0.00002191305,0.0001173632,0.0001974722,0.00001574123,0.00002308329,0.00002422606,0.3393835,0.6598534,0.0000632868,0.00006361697,0.00007185304],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5373644,0.00004903945,0.462246,0.00005376744,0.0001829016,0.00004314018,0.000004722051,0.00004929886,0.000006685812],"genre_scores_gemma":[0.9954489,0.0001090421,0.004304633,0.000006651597,0.00008712109,0.000004084416,0.000009372622,0.00002565178,0.000004486467],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5897843,"threshold_uncertainty_score":0.4532008,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2955696789","doi":"10.1016/j.actbio.2019.06.040","title":"Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces","year":2019,"lang":"en","type":"article","venue":"Acta Biomaterialia","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":224,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Toronto; Okanagan University College; University of British Columbia, Okanagan Campus; University of British Columbia","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Polydimethylsiloxane; Porosity; Biocompatibility; Composite material; Polymer; Tissue engineering; Mold; Scaffold; Template; Simulated body fluid; Permeability (electromagnetism); Biomedical engineering; Nanotechnology; Scanning electron microscope; Membrane","retraction":null,"screen_n_in":null,"score":{"opus":0.01166103402234414,"gpt":0.1911818299987919,"spread":0.1795207959764477,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001629063,0.0002597789,0.0003724686,0.00007237031,0.00005291809,0.00006173489,0.0002231221,0.0001652478,0.00005353148],"category_scores_gemma":[0.00003340571,0.0001901562,0.00002814733,0.0001043155,0.0002018826,0.0001015258,0.000118922,0.00004866493,0.00001048215],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003681681,"about_ca_system_score_gemma":0.00001134688,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001929194,"about_ca_topic_score_gemma":0.000007382045,"domain_scores_codex":[0.9988805,0.00004438179,0.0003027339,0.0003242706,0.0001452489,0.0003028855],"domain_scores_gemma":[0.9994883,0.0000290498,0.00008059349,0.0003076478,0.00004840976,0.00004601799],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001633068,0.00003989884,0.0009682643,0.0002032376,0.00007945994,0.000001941458,0.0001919877,0.000008298832,0.9975394,0.00002692961,0.0002407886,0.0005364823],"study_design_scores_gemma":[0.0003304159,0.0002702788,0.006818309,0.00008898681,0.00002489169,0.00001264879,0.0002354984,0.0007666869,0.9909049,0.0000327862,0.0002437241,0.0002708643],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9983294,0.00007079412,0.00006304828,0.00006133797,0.0002826888,0.0003159341,0.00006525149,0.0007741703,0.00003735506],"genre_scores_gemma":[0.9986356,0.0000153447,0.001232646,0.000003680779,0.00001317913,0.00001697389,0.0000201643,0.00003563444,0.00002672726],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.006634495,"threshold_uncertainty_score":0.7754344,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4200078716","doi":"10.1016/j.bioactmat.2021.12.027","title":"Additively manufactured metallic biomaterials","year":2021,"lang":"en","type":"review","venue":"Bioactive Materials","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":219,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Waterloo","funders":"National Institute of Arthritis and Musculoskeletal and Skin Diseases; Natural Sciences and Engineering Research Council of Canada; National Institutes of Health","keywords":"Scaffold; Biocompatible material; Materials science; Nanotechnology; Tissue engineering; Computer science; Durability; Porosity; Fabrication; Mechanical engineering; Manufacturing engineering; Biomedical engineering; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.04974746071482871,"gpt":0.2890725476302026,"spread":0.2393250869153739,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow","insufficient_payload"],"consensus_categories":["insufficient_payload"],"category_scores_codex":[0.0003012974,0.00115022,0.003597127,0.0004335749,0.0001130993,0.0003611335,0.0006736256,0.000931058,0.002939315],"category_scores_gemma":[0.0001677299,0.0009446362,0.0005457894,0.0002532139,0.0001820786,0.0001368647,0.000383897,0.0002146416,0.0008358992],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002551322,"about_ca_system_score_gemma":0.00007681407,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001500227,"about_ca_topic_score_gemma":8.847096e-7,"domain_scores_codex":[0.9970147,0.0003411416,0.0009581327,0.000768211,0.0002406969,0.0006771405],"domain_scores_gemma":[0.9983889,0.0002633853,0.0003800526,0.0008054445,0.00006482468,0.0000973599],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000004265778,0.00003752114,2.014938e-8,0.0128935,0.002165184,0.000143893,0.00003758087,6.767544e-7,0.003852873,0.0005139016,0.005790147,0.9745604],"study_design_scores_gemma":[0.00006479939,0.0000148395,0.000002062972,0.003704885,0.0004623482,0.0000436514,0.00002173768,7.515144e-8,0.3221212,0.0001126046,0.6727561,0.0006957486],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0005861855,0.9875481,0.00009595102,0.000005440666,0.002808911,0.0008022988,0.004718157,0.002614863,0.0008201184],"genre_scores_gemma":[0.0006509735,0.995186,0.0008761385,0.000007904344,0.0005366781,0.0005010146,0.001698832,0.0002729669,0.0002695131],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9738647,"threshold_uncertainty_score":0.9999421,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4367322327","doi":"10.1016/j.ajps.2023.100812","title":"Additive manufacturing of sustainable biomaterials for biomedical applications","year":2023,"lang":"en","type":"review","venue":"Asian Journal of Pharmaceutical Sciences","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":209,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Western University","funders":"","keywords":"3D bioprinting; Biopolymer; Nanotechnology; 3D printing; Biocompatibility; Environmentally friendly; Materials science; Drug delivery; 3d printed; Tissue engineering; Biocompatible material; Biomedical engineering; Polymer; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.08895660710070107,"gpt":0.3949307020676566,"spread":0.3059740949669555,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001139394,0.0002600047,0.001029178,0.0006410013,0.0001373149,0.00006222407,0.0008929161,0.0001986695,0.0000583253],"category_scores_gemma":[0.0002534785,0.0001832979,0.0003806945,0.0004856069,0.000698271,0.0001265347,0.0001395922,0.0002384703,0.00001502082],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008367375,"about_ca_system_score_gemma":0.0001455964,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":6.712488e-7,"about_ca_topic_score_gemma":8.300558e-8,"domain_scores_codex":[0.9980395,0.00005832066,0.0009088198,0.0001996299,0.0003198384,0.0004738638],"domain_scores_gemma":[0.9986147,0.0006001065,0.0004387409,0.0001246286,0.00008297971,0.0001387893],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000002256004,0.00001997171,6.355145e-8,0.008192391,0.0001923957,0.00001982709,0.00002522525,0.000008171432,0.00001337901,0.001802133,0.00108687,0.9886373],"study_design_scores_gemma":[0.0001102482,0.000101165,8.582315e-7,0.002365094,0.0002956612,0.00005695964,0.0003884105,0.00002102378,0.01222936,0.00312453,0.981113,0.0001937164],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00006990734,0.9745474,0.02105977,0.0001714203,0.000834398,0.001342793,0.0003913221,0.000425209,0.001157787],"genre_scores_gemma":[0.002155184,0.9937055,0.003503928,0.000003711621,0.0003980373,0.0001258546,0.00001313288,0.00004370138,0.00005096806],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9884436,"threshold_uncertainty_score":0.7474672,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2894199312","doi":"10.1016/j.mtcomm.2018.09.017","title":"Effect of infill patterns on the mechanical performance of lightweight 3D-printed cellular PLA parts","year":2018,"lang":"en","type":"article","venue":"Materials Today Communications","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":208,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université de Sherbrooke","funders":"","keywords":"Infill; Materials science; Ultimate tensile strength; Stiffness; Composite material; Flexural strength; Structural engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01600073438068986,"gpt":0.2338277187678169,"spread":0.217826984387127,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004917195,0.0001352112,0.00023261,0.00006299427,0.0001141059,0.00001451028,0.000910413,0.00008678606,0.0002313281],"category_scores_gemma":[0.0001300307,0.00009089319,0.00003826901,0.0000769938,0.0002085387,0.00003279611,0.0003967853,0.0001393159,0.00005087226],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001590379,"about_ca_system_score_gemma":0.000004395611,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001697107,"about_ca_topic_score_gemma":0.000004387069,"domain_scores_codex":[0.9991806,0.0001765083,0.0003101304,0.0000936365,0.00009715598,0.0001420234],"domain_scores_gemma":[0.9978095,0.0004264542,0.0001038407,0.0015969,0.00004747334,0.00001583621],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000891611,0.000101494,0.0006038939,0.0004577207,0.0001846209,6.585443e-7,0.0006954959,0.0001927095,0.9771986,0.01043769,0.0007289905,0.009308933],"study_design_scores_gemma":[0.00009479257,0.0002469442,0.001253166,0.0001821437,0.00001770042,7.221527e-7,0.00001222444,0.0009386613,0.9952888,0.00009685614,0.001779931,0.00008803383],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9976808,0.00002274248,0.0003132042,0.0001970532,0.0001700242,0.0001955055,0.00006014962,0.0002581085,0.001102411],"genre_scores_gemma":[0.999247,0.0001170716,0.0004851476,0.000009377046,0.00003026079,0.00005379397,0.000019888,0.00001991032,0.00001762399],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01809019,"threshold_uncertainty_score":0.3706517,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2026979966","doi":"10.1002/smll.201300975","title":"Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems","year":2013,"lang":"en","type":"article","venue":"Small","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":203,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"3D printing; Fabrication; Materials science; Protein filament; Thermoplastic; Solvent; Inkwell; Microstructure; Polymer; Fused filament fabrication; Rigidity (electromagnetism); Nanotechnology; Microsystem; Composite material; 3d printer; Evaporation; Chemical engineering; Mechanical engineering; Chemistry; Organic chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.01837817886478405,"gpt":0.1905018218635476,"spread":0.1721236429987636,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00007378198,0.0001155932,0.0001342346,0.00007219252,0.0000426003,0.00001655811,0.000133045,0.00007674791,0.0001769081],"category_scores_gemma":[0.00003918073,0.0001056043,0.00006009851,0.00005349841,0.00005293536,0.00004621059,0.00009351744,0.0001535378,0.000191967],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002178265,"about_ca_system_score_gemma":0.000006297756,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00009178039,"about_ca_topic_score_gemma":0.00002159855,"domain_scores_codex":[0.9993858,0.000006012244,0.0001978651,0.0001289553,0.00008917791,0.0001921387],"domain_scores_gemma":[0.9996415,0.00006190142,0.00004451751,0.000170474,0.00005570862,0.00002589922],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001935375,0.0001932577,0.06711437,0.001156745,0.0005838086,0.00001449155,0.0003854929,0.06442786,0.6778155,0.003662132,0.01217872,0.1724483],"study_design_scores_gemma":[0.0005520454,0.0000544471,0.2105578,0.0002730704,0.00001939691,0.00002853249,0.0001597886,0.05635507,0.7232437,0.002645168,0.005584247,0.0005267637],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9925544,0.00008701147,0.004958934,0.00003830704,0.0003543369,0.0001317727,0.000006793103,0.0005776466,0.001290796],"genre_scores_gemma":[0.9919232,0.000001414861,0.007797309,0.000006346837,0.00006825445,0.0000235547,0.000006948108,0.00002004982,0.000152947],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1719215,"threshold_uncertainty_score":0.4306419,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2157025026","doi":"10.1002/jbm.a.32834","title":"Design of three‐dimensional biomimetic scaffolds","year":2010,"lang":"en","type":"review","venue":"Journal of Biomedical Materials Research Part A","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":202,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Toronto","funders":"Natural Sciences and Engineering Research Council of Canada; Canadian Institutes of Health Research","keywords":"Materials science; Nanotechnology; Biomimetics","retraction":null,"screen_n_in":null,"score":{"opus":0.1409783442797857,"gpt":0.3766855233048563,"spread":0.2357071790250705,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.005271102,0.0003384422,0.001963837,0.001388978,0.00007049313,0.00006913572,0.001043037,0.0008747681,0.0007128203],"category_scores_gemma":[0.001088066,0.0002230902,0.0002877734,0.0004976089,0.0009009704,0.00006667681,0.0003583347,0.001083931,0.0001037764],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009317057,"about_ca_system_score_gemma":0.0003714882,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003904806,"about_ca_topic_score_gemma":2.599767e-7,"domain_scores_codex":[0.995954,0.0004656679,0.001535231,0.0002047411,0.001265407,0.0005749252],"domain_scores_gemma":[0.9972558,0.001329985,0.0004741693,0.0004117377,0.0003005317,0.0002277702],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.0000281783,0.0001081483,1.100415e-7,0.009561574,0.0004198345,0.000173234,0.000009471951,0.000007389498,0.009776723,0.00003458684,0.0155471,0.9643337],"study_design_scores_gemma":[0.0002041891,0.0003895745,0.00000174303,0.0134436,0.0001402532,0.000270624,0.000003659734,0.00002455914,0.02530463,0.0009034983,0.9590719,0.0002417237],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.002063471,0.9932097,0.001609487,0.0000624192,0.002274733,0.0005005664,0.0001230958,0.0001236878,0.00003280191],"genre_scores_gemma":[0.0008216042,0.992833,0.005342936,0.000001527876,0.0008496928,0.00002890634,0.00001949184,0.00007734227,0.00002556181],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.964092,"threshold_uncertainty_score":0.9097354,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2297981365","doi":"10.1108/rpj-11-2014-0149","title":"Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process","year":2016,"lang":"en","type":"article","venue":"Rapid Prototyping Journal","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":198,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Beihang University; McGill University","keywords":"Taguchi methods; Process (computing); Process engineering; Orthogonal array; Design of experiments; Process variable; Materials science; Quality (philosophy); Response surface methodology; Product (mathematics); Manufacturing process; Manufacturing engineering; Engineering drawing; Mechanical engineering; Computer science; Engineering; Composite material; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.02689421152502779,"gpt":0.2824318623199655,"spread":0.2555376507949377,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0009142425,0.0003647667,0.0004358617,0.0002262442,0.0003448265,0.0001180427,0.0003285991,0.0001901141,0.0000397877],"category_scores_gemma":[0.0008150701,0.0002792309,0.0001208085,0.00007469798,0.0001411079,0.0007204436,0.00007214111,0.0004325115,0.000001106938],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001090923,"about_ca_system_score_gemma":0.00005084456,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003514482,"about_ca_topic_score_gemma":6.098542e-7,"domain_scores_codex":[0.9979655,0.00007097478,0.0007322316,0.0003792553,0.0002682185,0.0005838937],"domain_scores_gemma":[0.9981781,0.0007481803,0.0005687457,0.0002316227,0.0001626262,0.0001107882],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001929047,0.00003275062,0.0003577532,0.002386153,0.0002277141,0.000004734566,0.0008129044,0.07630832,0.005483118,0.00002991477,0.00002471062,0.914139],"study_design_scores_gemma":[0.001006749,0.000103259,0.001212699,0.0008773512,0.00003621215,0.00005187688,0.0005832083,0.009802603,0.9835255,0.002243346,0.00009901993,0.0004581573],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.7780418,0.0002053266,0.2198,0.0001541794,0.0001563641,0.001102271,0.00003724985,0.0004456064,0.0000572437],"genre_scores_gemma":[0.9721581,0.0002085682,0.02727744,0.00001470594,0.00009942731,0.000152728,0.000004398498,0.00007720467,0.000007375763],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.9780424,"threshold_uncertainty_score":0.999966,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W811242086","doi":"10.1016/j.jmapro.2015.06.024","title":"A new part consolidation method to embrace the design freedom of additive manufacturing","year":2015,"lang":"en","type":"article","venue":"Journal of Manufacturing Processes","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":192,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada; Faculty of Engineering, McGill University","keywords":"Consolidation (business); CAD; Manufacturing engineering; Computer science; Engineering; Engineering drawing","retraction":null,"screen_n_in":null,"score":{"opus":0.04320923083793677,"gpt":0.2729461249939052,"spread":0.2297368941559685,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001094833,0.0003104359,0.0004809146,0.0003317689,0.00008721297,0.00009279958,0.0007477942,0.0001281185,0.00005273658],"category_scores_gemma":[0.0009415959,0.0002185077,0.0001079448,0.0001780496,0.00006512376,0.0003648572,0.0001485455,0.0005148036,0.00002010303],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001064051,"about_ca_system_score_gemma":0.0002202421,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002095452,"about_ca_topic_score_gemma":0.000006155888,"domain_scores_codex":[0.9981536,0.0001103464,0.0006873894,0.0001988331,0.0004968228,0.0003529757],"domain_scores_gemma":[0.9978108,0.0009089581,0.0004699136,0.000312642,0.0002862096,0.0002114956],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0002476105,0.00004876093,0.00001898505,0.0004118563,0.000434736,0.00004254246,0.002925504,0.7504785,0.0005182021,0.00004807143,0.06138346,0.1834417],"study_design_scores_gemma":[0.0004259233,0.0001968874,0.0003232897,0.0003039349,0.00007315542,0.0001172796,0.0009261819,0.00009416187,0.9534826,0.003029058,0.04078918,0.0002383003],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.1214822,0.0005402889,0.8751354,0.0006358926,0.0006475896,0.0003231478,0.00001803064,0.0003152135,0.0009022263],"genre_scores_gemma":[0.8532196,0.0001174989,0.1459134,0.00004954726,0.000441344,0.00001200584,0.000002077261,0.00005295718,0.0001915693],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.9529644,"threshold_uncertainty_score":0.8910486,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2884812296","doi":"10.4028/www.scientific.net/ssp.278.1","title":"A Review of Metal Additive Manufacturing Technologies","year":2018,"lang":"en","type":"review","venue":"Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":188,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Materials science; Inconel; Metallurgy; Microstructure; Aerospace; Aluminium; Nickel; Alloy; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.05812838298563823,"gpt":0.3211192050561984,"spread":0.2629908220705602,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow","open_science","research_integrity"],"consensus_categories":["metaepi_narrow","open_science"],"category_scores_codex":[0.002615611,0.003491273,0.007682483,0.001598034,0.0007601361,0.0004944106,0.006974583,0.0006300196,0.0002420442],"category_scores_gemma":[0.0008470023,0.002994894,0.000796223,0.001185253,0.001718365,0.001615417,0.01373332,0.002670536,0.0005060537],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0004586071,"about_ca_system_score_gemma":0.0003630215,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00006586221,"about_ca_topic_score_gemma":0.00007740095,"domain_scores_codex":[0.9865844,0.0007036673,0.004143312,0.004203174,0.001259185,0.003106218],"domain_scores_gemma":[0.9863076,0.001160786,0.00228109,0.009297311,0.0003378916,0.0006153498],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.0000673612,0.0002786753,0.000001502935,0.07918933,0.003057995,0.0001168028,0.0004729042,0.00005949673,0.00001073768,0.00002161954,0.0533662,0.8633574],"study_design_scores_gemma":[0.0009141162,0.000354455,0.000005084154,0.0392402,0.001737602,0.00009615274,0.0003686626,0.000831349,0.0009069312,0.00144638,0.9510006,0.003098471],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0003335737,0.8429291,0.002054855,0.00005290191,0.001158648,0.003201134,0.1459336,0.003329671,0.001006588],"genre_scores_gemma":[0.000275821,0.9467421,0.0009595106,0.000122637,0.000417165,0.000510079,0.05002096,0.0006157318,0.0003359983],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.8976344,"threshold_uncertainty_score":0.9996303,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2767383620","doi":"10.1016/j.addma.2017.11.004","title":"Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures","year":2017,"lang":"en","type":"article","venue":"Additive manufacturing","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":181,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Taguchi methods; Materials science; Fused deposition modeling; Fabrication; Lattice (music); Lattice constant; Manufacturing process; Modulus; Composite material; Mechanical engineering; 3D printing; Optics; Engineering; Diffraction","retraction":null,"screen_n_in":null,"score":{"opus":0.02499034994364965,"gpt":0.2814403440212548,"spread":0.2564499940776052,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002295135,0.0002281395,0.0002954952,0.00009297286,0.000382052,0.00006558905,0.000587024,0.0001149726,0.000008551681],"category_scores_gemma":[0.0003420333,0.0001844813,0.0001199281,0.00003051619,0.0001280047,0.0002396489,0.00009554056,0.000227269,5.690835e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003785081,"about_ca_system_score_gemma":0.0000087955,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00009187119,"about_ca_topic_score_gemma":0.00000568572,"domain_scores_codex":[0.9989433,0.00002676506,0.0003358448,0.0002547271,0.0001737714,0.0002656332],"domain_scores_gemma":[0.9983944,0.00059979,0.0003317909,0.0005346947,0.0001110328,0.00002824768],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006620752,0.00002408228,0.00002779546,0.0004556494,0.0004407943,8.378248e-7,0.001060736,0.5705239,0.009239685,0.0004316971,0.0002733959,0.4174553],"study_design_scores_gemma":[0.0002083493,0.00002480302,0.000374797,0.00008174183,0.00006836132,0.000001295318,0.0004228473,0.2790286,0.7168497,0.002759889,0.00003067924,0.0001488949],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.339162,0.0001104699,0.6596364,0.00005188654,0.0001274327,0.0003373897,0.0001702682,0.0001826959,0.0002214213],"genre_scores_gemma":[0.9229341,0.00005431824,0.07678809,0.0000102741,0.00003247774,0.00009700648,0.00003823016,0.00003895588,0.000006567786],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.7076101,"threshold_uncertainty_score":0.7522928,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2959858195","doi":"10.1007/s00170-019-04074-6","title":"Large-scale 3D printers for additive manufacturing: design considerations and challenges","year":2019,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":179,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Ontario Tech University","funders":"National Research Council Canada; University of Ontario Institute of Technology","keywords":"3D printing; Extrusion; Fused filament fabrication; 3d printed; Fused deposition modeling; Scale (ratio); Manufacturing engineering; Plastics extrusion; Process (computing); Mechanical engineering; Process engineering; Engineering drawing; Computer science; Engineering; Materials science; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.01965298033990014,"gpt":0.2418177412634315,"spread":0.2221647609235313,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003442941,0.0002445906,0.0003159987,0.0004404756,0.00009989121,0.00005409351,0.0006657789,0.0001629796,0.00005152604],"category_scores_gemma":[0.0001734764,0.0001892016,0.00009743875,0.00002958511,0.0001473332,0.000222218,0.0002405164,0.0005094093,0.000009073367],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001161636,"about_ca_system_score_gemma":0.0000215382,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":4.358412e-7,"about_ca_topic_score_gemma":0.000005124423,"domain_scores_codex":[0.9988074,0.00002232532,0.0004117922,0.0002291984,0.0002091846,0.0003201533],"domain_scores_gemma":[0.9986396,0.0006296452,0.0002505317,0.0002937352,0.0001466649,0.00003980191],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0006513569,0.0002053934,0.0000661434,0.0003058926,0.002570163,0.0001455328,0.003139554,0.1792042,0.02198065,0.03051638,0.003080729,0.7581339],"study_design_scores_gemma":[0.0009939218,0.0001868871,0.0004091097,0.0001252405,0.00002906604,0.0003395595,0.001821708,0.001143884,0.8893483,0.06812714,0.03724839,0.0002267516],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9104546,0.00126846,0.07824817,0.006914355,0.001471828,0.000544743,0.00004669326,0.0006312269,0.0004198683],"genre_scores_gemma":[0.9580137,0.002651607,0.03901506,0.0000795156,0.0001064999,0.00003738365,0.00000271874,0.00004026624,0.00005321146],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8673677,"threshold_uncertainty_score":0.7715419,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1686988970","doi":"10.1108/rpj-09-2013-0093","title":"Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer","year":2015,"lang":"en","type":"article","venue":"Rapid Prototyping Journal","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":171,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Glenrose Rehabilitation Hospital; University of Alberta","funders":"","keywords":"3D printing; Rapid prototyping; Infill; 3d printer; Engineering drawing; Design of experiments; Fused deposition modeling; Orientation (vector space); Mechanical engineering; Computer science; Materials science; 3d printed; Composite material; Structural engineering; Manufacturing engineering; Engineering; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.06424646822443372,"gpt":0.254817178269364,"spread":0.1905707100449302,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001303706,0.00009062253,0.0001286027,0.00005896611,0.0000525048,0.0000253531,0.0001447923,0.00005183706,0.00003276392],"category_scores_gemma":[0.0005038672,0.00005621352,0.0000357299,0.00004582227,0.0001050687,0.00009425062,0.00009562238,0.0001890945,9.517607e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004420096,"about_ca_system_score_gemma":0.00006646294,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002584215,"about_ca_topic_score_gemma":4.631497e-7,"domain_scores_codex":[0.9990976,0.0001079569,0.0002518722,0.0000697563,0.0003588953,0.0001139483],"domain_scores_gemma":[0.9994281,0.00001997294,0.0001254937,0.0001370838,0.0002626551,0.00002670482],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0002815778,0.00007693522,0.001895624,0.0005320609,0.0004029577,0.000002152859,0.002016546,0.01362427,0.1448562,0.0001859402,0.0006482769,0.8354774],"study_design_scores_gemma":[0.0005379351,0.00006126626,0.005643135,0.0005286463,0.00005009001,0.00008447141,0.0001144692,0.01090362,0.9793361,0.001904809,0.0007340694,0.0001014178],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9980505,0.0006360924,0.0002162525,0.00008023957,0.0003212452,0.0004552164,0.000002395211,0.00005628698,0.0001818423],"genre_scores_gemma":[0.9982578,0.00002585361,0.001600489,0.000003983595,0.00006315716,0.00003218586,2.626714e-7,0.00001147843,0.000004752026],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.835376,"threshold_uncertainty_score":0.2292321,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2051471119","doi":"10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1","title":"Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell","year":2000,"lang":"en","type":"article","venue":"Journal of Biomedical Materials Research","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":170,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université Laval","funders":"","keywords":"Materials science; Fabrication; Ceramic; Casting; 3D printing; Composite material; Undercut; Mold; Porosity; Shell (structure); Layer (electronics); Engineering drawing","retraction":null,"screen_n_in":null,"score":{"opus":0.03065506779994986,"gpt":0.2859066521832293,"spread":0.2552515843832794,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001008608,0.0001092145,0.0002843809,0.0002028864,0.00004961164,0.00004828215,0.0002581942,0.0001329028,0.0005660901],"category_scores_gemma":[0.0001381504,0.00007121557,0.00001866313,0.0001752404,0.0003344698,0.00008386911,0.00005785358,0.0003309069,0.0000124614],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004455946,"about_ca_system_score_gemma":0.0000437103,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00009719547,"about_ca_topic_score_gemma":0.000001858799,"domain_scores_codex":[0.9985957,0.0001288561,0.0003944593,0.0001140849,0.0005114733,0.0002554698],"domain_scores_gemma":[0.9992186,0.0002980735,0.00008678273,0.0001508498,0.0001473279,0.00009831061],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0006174458,0.00009374391,0.0002534739,0.0002356841,0.0002009163,0.0001263081,0.0003649811,0.0005956835,0.8515161,0.00001060271,0.001996451,0.1439886],"study_design_scores_gemma":[0.0006209725,0.0005274009,0.01515577,0.0003993014,0.0000154414,0.0001359805,0.0001286698,0.0005930871,0.9800627,0.0006525315,0.001582472,0.0001257238],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9952101,0.0001845871,0.004104848,0.0001366812,0.00008352059,0.0001236412,0.00004511034,0.00005300965,0.0000585456],"genre_scores_gemma":[0.9936977,0.0007466816,0.005389747,0.000002844836,0.0001016723,0.000001415408,0.000007861679,0.00001752447,0.00003455793],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1438629,"threshold_uncertainty_score":0.619829,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2898863411","doi":"10.1007/s00170-018-2827-7","title":"3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts","year":2018,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":169,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"PricewaterhouseCoopers (Canada)","funders":"","keywords":"Crew; 3D printing; Process (computing); Fused filament fabrication; Aerospace engineering; International Space Station; Mechanical engineering; Phase (matter); Engineering; Manufacturing engineering; Systems engineering; Computer science; Aeronautics; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01313600470299662,"gpt":0.2501648218044178,"spread":0.2370288171014212,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003273382,0.000190475,0.0002971787,0.0008665798,0.00007163747,0.00002233826,0.0007008996,0.000227453,0.000009083684],"category_scores_gemma":[0.0001833818,0.0001542502,0.00004434403,0.0001472737,0.0003833404,0.0001774951,0.0003551312,0.0005157498,0.000001423852],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001087486,"about_ca_system_score_gemma":0.00001724877,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006153515,"about_ca_topic_score_gemma":0.000004586758,"domain_scores_codex":[0.9985405,0.00001758134,0.0008111791,0.0001908273,0.0002064252,0.0002335223],"domain_scores_gemma":[0.9991711,0.00007076547,0.0003659421,0.0002414541,0.0001280172,0.00002267111],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0008391471,0.0001092752,0.0004208425,0.00005787069,0.0003471412,0.0001651318,0.0006062922,0.1203586,0.6951437,0.004214712,0.00009243454,0.1776449],"study_design_scores_gemma":[0.0008268506,0.0001630997,0.0001892412,0.0003406356,0.000009015947,0.0003521405,0.0004062207,0.01162079,0.96522,0.02033372,0.0003963658,0.0001419081],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9939666,0.0002331262,0.003532675,0.0009158885,0.000686997,0.0001176535,0.000009124788,0.0002910317,0.0002468805],"genre_scores_gemma":[0.9856339,0.0001620537,0.01409539,0.000008178768,0.00006287105,0.000003640254,0.000003415464,0.000022701,0.000007856954],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2700763,"threshold_uncertainty_score":0.6290141,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2092404702","doi":"10.5539/jsd.v3n3p68","title":"Tools for Sustainable Product Design: Additive Manufacturing","year":2010,"lang":"en","type":"article","venue":"Journal of Sustainable Development","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":165,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":true,"about_ca":false},"ca_institutions":"","funders":"","keywords":"Product (mathematics); Sustainability; Product design; Sustainable design; Business; Manufacturing engineering; Computer science; Emerging technologies; Pleasure; Risk analysis (engineering); Engineering; Psychology","retraction":null,"screen_n_in":null,"score":{"opus":0.01606931032993044,"gpt":0.2237588698091711,"spread":0.2076895594792406,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00111849,0.0002701308,0.0003463115,0.0004409409,0.0002814761,0.0002378868,0.0004393808,0.0001218169,0.00005633663],"category_scores_gemma":[0.001147014,0.0002384333,0.0001019154,0.0001429385,0.00006316563,0.0008160967,0.0001362343,0.0006381967,0.000006564551],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0003506775,"about_ca_system_score_gemma":0.0003157093,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001858806,"about_ca_topic_score_gemma":6.293122e-7,"domain_scores_codex":[0.9981874,0.00001818862,0.0005425865,0.0001892728,0.0002509575,0.0008116546],"domain_scores_gemma":[0.9984265,0.0003272571,0.0002137145,0.0002201827,0.0007052621,0.0001071138],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0005415222,0.0003627822,0.0001241784,0.003393601,0.001492041,0.003883478,0.005910797,0.02396072,0.008889822,0.01947638,0.100642,0.8313227],"study_design_scores_gemma":[0.0003843711,0.00007042848,0.001657546,0.00003241884,0.00001771674,0.00007303699,0.007070108,0.00005648901,0.6804478,0.003830622,0.3060894,0.0002700977],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8667887,0.0001896471,0.1285666,0.0002392102,0.0005821276,0.001112761,0.000002998305,0.000477928,0.002040054],"genre_scores_gemma":[0.9162264,0.00003032147,0.08045863,0.00001717599,0.0002374922,0.00009545544,0.000004495403,0.0000521162,0.002877907],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8310526,"threshold_uncertainty_score":0.9723028,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2076921505","doi":"10.1039/c4nr02041c","title":"Three-dimensional printing of freeform helical microstructures: a review","year":2014,"lang":"en","type":"review","venue":"Nanoscale","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":162,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"3D printing; Fabrication; Materials science; Microfabrication; Fused deposition modeling; Nanotechnology; Microstructure; Deposition (geology); Fused filament fabrication; Microelectromechanical systems; Microelectronics; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.0214568284779811,"gpt":0.2709919532778225,"spread":0.2495351247998414,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002051329,0.0004769918,0.001928861,0.0001482183,0.00005115739,0.00001784082,0.0005624277,0.0004858075,0.00007756909],"category_scores_gemma":[0.0002318448,0.0003601657,0.0005590186,0.0002046462,0.0001303109,0.00004020915,0.0002938483,0.0007226414,0.00007630971],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006434241,"about_ca_system_score_gemma":0.00003970716,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007594178,"about_ca_topic_score_gemma":0.00000593856,"domain_scores_codex":[0.9982607,0.00002736022,0.0007841487,0.0003466535,0.0002282243,0.0003529577],"domain_scores_gemma":[0.9987826,0.0002027907,0.000252327,0.0006607981,0.00004744209,0.00005402299],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[3.177651e-7,0.000005821743,0.000001003514,0.08525492,0.00007586069,0.000002310178,0.000001573387,0.000003845807,0.000004807784,0.00009651101,0.003964575,0.9105884],"study_design_scores_gemma":[0.00005061305,0.00001711968,0.00000874044,0.07143985,0.0002173932,0.00004000365,3.946495e-7,0.00002723316,0.0005530941,0.000218935,0.9270839,0.0003427361],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00003634882,0.9969255,0.001004394,0.00001157526,0.0003191964,0.0004681015,0.00006873011,0.0006814813,0.0004846574],"genre_scores_gemma":[0.0000499046,0.9963306,0.003187237,0.00002335359,0.0001297379,0.00006112403,0.00006291593,0.00008729312,0.00006780239],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9231193,"threshold_uncertainty_score":0.999885,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2959661596","doi":"10.1016/j.compositesb.2019.107101","title":"Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing","year":2019,"lang":"en","type":"article","venue":"Composites Part B Engineering","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":162,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Toronto Metropolitan University; McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Composite material; Turbine blade; Scrap; Ultimate tensile strength; Composite number; Reuse; Microstructure; Grinding; Fabrication; Fibre-reinforced plastic; Turbine; Mechanical engineering; Waste management","retraction":null,"screen_n_in":null,"score":{"opus":0.0115534254666396,"gpt":0.2095396354458326,"spread":0.197986209979193,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001244626,0.0003033325,0.0004178954,0.0003306372,0.00003330013,0.00004322904,0.000262361,0.0001493333,0.0000269028],"category_scores_gemma":[0.0001017832,0.0003315239,0.0001078584,0.0001360031,0.00002805025,0.0002712299,0.0001231791,0.0002951956,0.00001523528],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001126789,"about_ca_system_score_gemma":0.000006074669,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000149532,"about_ca_topic_score_gemma":0.000003771958,"domain_scores_codex":[0.9987218,0.000008813404,0.0004403905,0.0002811212,0.0001304966,0.0004174199],"domain_scores_gemma":[0.9989566,0.0005385268,0.00007426405,0.0003482657,0.00003255516,0.00004985674],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002901653,0.00001089463,0.000727329,0.0004948393,0.0001096628,0.000003893001,0.0002242036,0.8957864,0.09869099,0.0001645151,0.0001665358,0.003591707],"study_design_scores_gemma":[0.0004969944,0.00005667948,0.00329863,0.0005571941,0.00001249423,0.000002389484,0.0000387454,0.1657659,0.8258355,0.00004899805,0.003553372,0.0003332084],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9871786,0.00009447469,0.01102821,0.000009605716,0.0004128734,0.0004329912,0.00003861246,0.0006503064,0.0001543561],"genre_scores_gemma":[0.979598,0.00004022359,0.0199916,0.000006003796,0.00005963781,0.00003958785,0.00007352143,0.00006806698,0.0001233386],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7300206,"threshold_uncertainty_score":0.9999137,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2632955854","doi":"10.1080/20550340.2017.1341125","title":"Characterizing short-fiber-reinforced composites produced using additive manufacturing","year":2017,"lang":"en","type":"article","venue":"Advanced Manufacturing Polymer & Composites Science","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":161,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Kowa Company","keywords":"Materials science; Composite material; Polylactic acid; Crystallinity; Ultimate tensile strength; Extrusion; Annealing (glass); Protein filament; Tensile testing; Fused filament fabrication; Young's modulus; Microstructure; Polymer; Elastic modulus","retraction":null,"screen_n_in":null,"score":{"opus":0.01973802264221288,"gpt":0.2592866281123778,"spread":0.239548605470165,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow","sts","scholarly_communication"],"consensus_categories":[],"category_scores_codex":[0.0003727254,0.0008976377,0.000722554,0.0006311491,0.003414234,0.001186127,0.002944117,0.0001867842,0.00008757224],"category_scores_gemma":[0.0001190031,0.000909656,0.0002109255,0.0001663931,0.001558615,0.002806482,0.00140777,0.0008341082,0.0001094786],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0003949267,"about_ca_system_score_gemma":0.00006516178,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00008043242,"about_ca_topic_score_gemma":0.000005024628,"domain_scores_codex":[0.9955119,0.0000308482,0.0006759828,0.00129433,0.0007862395,0.001700687],"domain_scores_gemma":[0.9967595,0.0001884982,0.0003548595,0.002255723,0.000100753,0.0003406669],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002996214,0.000018964,0.0001081174,0.00008058472,0.00006772923,0.00003947849,0.0002099996,0.01351681,0.8996894,0.0001149478,0.00001639642,0.0861076],"study_design_scores_gemma":[0.0003646066,0.00005952001,0.009749824,0.0003322708,0.00004635011,0.00007345254,0.00008617095,0.007432075,0.9796165,0.000104851,0.001010941,0.001123491],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9882185,0.0002057562,0.002870974,0.0001292564,0.001116821,0.0005398625,0.0000589095,0.002412165,0.004447729],"genre_scores_gemma":[0.9894854,0.00005404518,0.009567403,0.00006989657,0.0002274272,0.00005382454,0.00002763641,0.0001313273,0.0003830818],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.08498411,"threshold_uncertainty_score":0.9998507,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2373114253","doi":"10.1016/j.jmbbm.2016.04.041","title":"Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting","year":2016,"lang":"en","type":"article","venue":"Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":157,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada; Canadian Institutes of Health Research; China Scholarship Council","keywords":"Selective laser melting; Materials science; Porosity; Compensation (psychology); Composite material; Biomaterial; Mechanical engineering; Nanotechnology; Engineering; Microstructure","retraction":null,"screen_n_in":null,"score":{"opus":0.01896754800684678,"gpt":0.2569828283440718,"spread":0.238015280337225,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.004582828,0.0006498532,0.00243704,0.001005752,0.00008159944,0.00009161403,0.001506259,0.0008679869,0.0004108206],"category_scores_gemma":[0.001553591,0.0003663061,0.0002891096,0.0007494561,0.0005302365,0.0003305967,0.0005699952,0.0004567178,0.000004453257],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002805544,"about_ca_system_score_gemma":0.0002188605,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00005243783,"about_ca_topic_score_gemma":0.000004720468,"domain_scores_codex":[0.9920156,0.0005680473,0.004353171,0.0004344567,0.001865153,0.0007635952],"domain_scores_gemma":[0.9950322,0.0005885155,0.002639961,0.0005324422,0.0006324232,0.0005744894],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0009957544,0.0006345581,0.00003863218,0.00023431,0.0001545101,0.0002145906,0.00006185062,0.000004244305,0.9852793,0.0002854946,0.0001090454,0.01198771],"study_design_scores_gemma":[0.002836124,0.003684589,0.003139125,0.00229331,0.0005491124,0.001377771,0.0002316347,0.000004060958,0.9839574,0.001456067,0.00004271409,0.0004281412],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9918754,0.00006272578,0.003438837,0.0007776281,0.002735107,0.0006396829,0.0004041118,0.00006546765,0.000001099039],"genre_scores_gemma":[0.9924542,0.0001496094,0.006869004,0.00002803746,0.0003615869,0.00003173502,0.000006491446,0.00009496859,0.000004349164],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01155957,"threshold_uncertainty_score":0.9998789,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4247499714","doi":"10.1201/9780203910795","title":"Rapid Prototyping Technology","year":2001,"lang":"en","type":"book","venue":"","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":153,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"Office of Naval Research; Natural Sciences and Engineering Research Council of Canada; Vlaamse regering; Financiadora de Estudos e Projetos; Vrije Universiteit Brussel; Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Ministério da Ciência, Tecnologia e Inovação; Fonds Wetenschappelijk Onderzoek; Kementerian Sains, Teknologi dan Inovasi; Islamic Azad University; Conselho Nacional de Desenvolvimento Científico e Tecnológico; National Natural Science Foundation of China; Deutscher Akademischer Austauschdienst; Fundação de Amparo à Pesquisa do Estado de São Paulo; Belgian Federal Science Policy Office","keywords":"Rapid prototyping; Computer science; Engineering; Mechanical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01404461996728866,"gpt":0.2036644545737615,"spread":0.1896198346064729,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00005466458,0.0003375996,0.0003250389,0.00049037,0.00005019998,0.00002301536,0.0004109804,0.0008401078,0.0007681501],"category_scores_gemma":[0.00003206646,0.0003219444,0.00008049545,0.0001000926,0.0001227064,0.00003030169,0.0001501737,0.0008683513,0.0006086417],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001425182,"about_ca_system_score_gemma":0.00003069452,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":5.181276e-7,"about_ca_topic_score_gemma":0.000001385111,"domain_scores_codex":[0.9990949,0.000003178527,0.0002093675,0.0002702743,0.0000891399,0.0003331287],"domain_scores_gemma":[0.9993684,0.00003117937,0.00003928538,0.0005089903,0.00002682362,0.00002537763],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000001139489,0.000003813773,0.000002057834,0.000178301,0.0001041619,0.00003871618,0.000006772982,0.00006355545,0.000009740881,0.01443136,0.2104048,0.7747556],"study_design_scores_gemma":[0.00006021576,0.00002191476,0.000002740829,0.0001666341,0.00001238107,0.00002405575,0.00000935355,0.0002217155,0.00740047,0.05018359,0.9415315,0.0003653976],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"other","genre_gemma":"other","genre_scores_codex":[0.00004862235,0.001532337,0.002925158,0.0001093335,0.0002335385,0.000430138,0.000007474816,0.01365998,0.9810534],"genre_scores_gemma":[0.001260658,0.001998208,0.003674377,0.00002269922,0.0002115335,0.0001895918,0.00003492988,0.0001564706,0.9924515],"genre_candidate":"other","genre_consensus":"other","teacher_disagreement_score":0.7743902,"threshold_uncertainty_score":0.9999233,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2473797470","doi":"10.1145/2897824.2925958","title":"Connected fermat spirals for layered fabrication","year":2016,"lang":"en","type":"article","venue":"ACM Transactions on Graphics","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":152,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Simon Fraser University","funders":"","keywords":"Fabrication; Geometry; Fermat's Last Theorem; Mathematics; Curvature; Spiral (railway); Mathematical analysis; Discrete mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.0303853997769502,"gpt":0.2434007027499819,"spread":0.2130153029730317,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00006059235,0.0001243345,0.0001075884,0.0001855901,0.0001146919,0.00001497199,0.0002177902,0.000117126,0.00003801875],"category_scores_gemma":[0.0001152312,0.0000956314,0.00008678864,0.000160515,0.00005436991,0.00008032838,0.000002862462,0.0001069986,0.00002919561],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000283574,"about_ca_system_score_gemma":0.00000458491,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002192278,"about_ca_topic_score_gemma":0.000006806044,"domain_scores_codex":[0.9994488,0.000009604275,0.0001373996,0.0001491406,0.00007129883,0.0001837644],"domain_scores_gemma":[0.9991366,0.0003348163,0.00002268726,0.0004197415,0.00005719189,0.00002892382],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006311819,0.0001295525,0.0001883019,0.0001563269,0.0003428871,0.000002022962,0.0001539566,0.003688608,0.0366231,0.008840764,0.005421896,0.9443895],"study_design_scores_gemma":[0.0009222301,0.0001357638,0.004649263,0.0001040239,0.00004075046,0.000004251225,0.00005317172,0.001270158,0.9142592,0.04707747,0.03104782,0.0004358846],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.1079569,0.00002150598,0.8884051,0.001129853,0.0002433515,0.0001907231,0.0001027855,0.001831559,0.0001181483],"genre_scores_gemma":[0.9952656,0.000156679,0.004252164,0.00005624453,0.00002319199,0.0001237609,0.000005605197,0.00002795215,0.00008881238],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.9439536,"threshold_uncertainty_score":0.3899736,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3211725161","doi":"10.1039/d1ra04060j","title":"Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective","year":2021,"lang":"en","type":"review","venue":"RSC Advances","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":149,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"Natural Sciences and Engineering Research Council of Canada; College of Engineering, Michigan State University; Ontario Ministry of Economic Development, Job Creation and Trade; Ontario Ministry of Agriculture, Food and Rural Affairs; Ministero dello Sviluppo Economico; University of Guelph; Ministry of Agriculture, Food and Rural Affairs; Michigan State University","keywords":"Manufacturing engineering; Manufacturing process; Process (computing); Process engineering; Computer science; Nanotechnology; Biochemical engineering; Engineering; Materials science; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.0152478433334298,"gpt":0.2708461809811453,"spread":0.2555983376477155,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.000152352,0.0005597734,0.001914588,0.0003849213,0.00009210151,0.00002896779,0.0002966032,0.0004031965,0.00003587428],"category_scores_gemma":[0.0002660649,0.0004669107,0.0001010581,0.0003286253,0.000170076,0.0001209369,0.0002129257,0.0003163814,0.000003742392],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000180021,"about_ca_system_score_gemma":0.00009691666,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":7.627339e-7,"about_ca_topic_score_gemma":7.72028e-7,"domain_scores_codex":[0.998217,0.00003845893,0.0006018518,0.0005948343,0.000152772,0.000395033],"domain_scores_gemma":[0.9989492,0.0001610432,0.0003663272,0.0003423876,0.0001507099,0.00003030354],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000007800286,0.0000122979,3.951367e-7,0.009541036,0.0002950658,0.000004484333,0.00003213599,0.000001100286,0.00002089464,0.0002250599,0.0001111766,0.9897485],"study_design_scores_gemma":[0.0002133834,0.00002699486,0.000003375485,0.003429511,0.0001495421,0.00002275169,0.0001699628,1.419865e-7,0.2128987,0.0003569683,0.7823484,0.0003802293],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0001855946,0.9959491,0.0003435283,0.00003389728,0.0008148772,0.001300858,0.0004836562,0.0006852384,0.0002032883],"genre_scores_gemma":[0.0001675906,0.9811875,0.01718642,0.000002176473,0.0002573185,0.0008943987,0.0001625673,0.00009281302,0.00004917885],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9893683,"threshold_uncertainty_score":0.9997783,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1996251002","doi":"10.1080/00207543.2014.937013","title":"Energy consumption model of Binder-jetting additive manufacturing processes","year":2014,"lang":"en","type":"article","venue":"International Journal of Production Research","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":147,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Energy consumption; Aerospace; Automotive industry; Process engineering; Mechanical engineering; Process (computing); Ceramic; Manufacturing engineering; Engineering; Product (mathematics); Energy (signal processing); Automotive engineering; Computer science; Materials science; Composite material; Mathematics; Aerospace engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.0752313566858412,"gpt":0.3321943070566795,"spread":0.2569629503708383,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009701572,0.00009162145,0.0001414555,0.000681152,0.00005910943,0.00003881872,0.0003963042,0.00006463053,0.00004228963],"category_scores_gemma":[0.001165304,0.0000836369,0.00004925056,0.00009925881,0.000142839,0.0002540132,0.00008801117,0.0004119444,0.000005867976],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001092296,"about_ca_system_score_gemma":0.00004855918,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005976749,"about_ca_topic_score_gemma":0.000003234082,"domain_scores_codex":[0.9985434,0.00006396279,0.0003614158,0.0001315437,0.000725682,0.0001739569],"domain_scores_gemma":[0.9981882,0.0002146151,0.0001691432,0.0001196256,0.001273477,0.00003493129],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001519392,0.0001392131,0.000402003,0.0003467711,0.0004691032,0.00001142249,0.0006506494,0.2912015,0.05056117,0.002464818,0.00738259,0.6462188],"study_design_scores_gemma":[0.0001574296,0.00004752551,0.0003197168,0.0001961785,0.000005251279,0.00004151877,0.0001260895,0.01038953,0.9786101,0.007236392,0.002791309,0.00007895252],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8908092,0.0001394208,0.1058714,0.0006956013,0.0008822435,0.00006036981,0.00001186442,0.0001282242,0.001401597],"genre_scores_gemma":[0.9959735,0.0004889656,0.00288754,0.000005548236,0.0004839602,0.000005526491,0.000003854873,0.0000167899,0.0001343528],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.9280489,"threshold_uncertainty_score":0.3410614,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4309769113","doi":"10.1016/j.heliyon.2022.e11701","title":"Application of fused deposition modeling (FDM) on bone scaffold manufacturing process: A review","year":2022,"lang":"en","type":"review","venue":"Heliyon","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":140,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"Calgary Arts Development; Kementerian Riset Teknologi Dan Pendidikan Tinggi Republik Indonesia; American Bureau of Shipping","keywords":"Scaffold; Biocompatible material; 3D printing; Bone grafting; Process (computing); Biomedical engineering; Fused deposition modeling; Materials science; Computer science; Engineering; Dentistry; Medicine; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.03777798293598393,"gpt":0.2837052400179936,"spread":0.2459272570820096,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002481551,0.0004767755,0.001284108,0.0003376533,0.00009992201,0.0000171457,0.0004064019,0.0002479964,0.00006198656],"category_scores_gemma":[0.00005812776,0.0004483415,0.0003400719,0.0002490788,0.00002274221,0.00006256744,0.0001180035,0.0006763109,0.00005222408],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002075736,"about_ca_system_score_gemma":0.00002742933,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00000321215,"about_ca_topic_score_gemma":8.458878e-7,"domain_scores_codex":[0.9981228,0.00005907179,0.0007519444,0.0004436533,0.0003297745,0.0002927355],"domain_scores_gemma":[0.9988651,0.0001112424,0.0003030205,0.000658069,0.00002309788,0.00003946442],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000001310042,0.00001741619,4.078495e-8,0.2116469,0.00004781007,0.000003205433,0.000009372497,0.003459628,0.000001716862,0.00002134948,0.00003331419,0.7847579],"study_design_scores_gemma":[0.0001322829,0.00007786781,4.485054e-7,0.1949161,0.0006376464,0.00004756454,0.00002552268,0.004989279,0.003190759,0.0001240928,0.7949718,0.0008866757],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00007993494,0.9902051,0.006481352,0.00001001971,0.0001159753,0.001029824,0.00004778745,0.001230894,0.0007990826],"genre_scores_gemma":[0.001555034,0.9966863,0.0003440336,0.00002073803,0.00006978928,0.000935417,0.0002500235,0.0001244592,0.00001419857],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.7949384,"threshold_uncertainty_score":0.9997968,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2914374315","doi":"10.1021/acsami.8b19986","title":"Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports","year":2019,"lang":"en","type":"article","venue":"ACS Applied Materials & Interfaces","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":139,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"AUTO21 Network of Centres of Excellence; Fonds de recherche du Québec – Nature et technologies; Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Ceramic; Porosity; Composite material; Thermal conductivity; Brittleness; Shrinkage; Ultimate tensile strength; Metal; 3D printing; Copper; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.01668695520794995,"gpt":0.2298695536833243,"spread":0.2131825984753744,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0002365866,0.0004076369,0.0006009016,0.0001105564,0.0001058903,0.0002690258,0.000391339,0.0001723143,0.0007680125],"category_scores_gemma":[0.00002130063,0.0003317639,0.000021327,0.00006215265,0.00009232193,0.0001213911,0.0001948124,0.0001192048,0.00006893985],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004441952,"about_ca_system_score_gemma":0.00001007385,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000033015,"about_ca_topic_score_gemma":0.000008890725,"domain_scores_codex":[0.9984493,0.00001857692,0.0004188492,0.0004435203,0.0001441139,0.0005256542],"domain_scores_gemma":[0.9992632,0.00009728942,0.0001387853,0.0004250729,0.00004102907,0.00003459211],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001124961,0.00001179035,0.00001564424,0.0003516443,0.0001480446,0.000002526321,0.0001087833,0.0009056452,0.995839,0.000347872,0.0004394892,0.001717059],"study_design_scores_gemma":[0.0005527114,0.00007970173,0.0003802349,0.00006926191,0.00004109782,0.00001022796,0.0002243058,0.00004289524,0.9958073,0.000549497,0.001797,0.0004457989],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9949183,0.00003344235,0.0003934886,0.00001989004,0.0006100257,0.0007757332,0.0002847535,0.001581703,0.001382687],"genre_scores_gemma":[0.9671115,0.00001642619,0.03216731,0.00002561078,0.0001200762,0.000162618,0.0001547087,0.0001077999,0.0001339785],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03177382,"threshold_uncertainty_score":0.9999135,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3002603768","doi":"10.1007/s00170-020-04937-3","title":"The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modeling","year":2020,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":135,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Nozzle; Extrusion; Materials science; Fused deposition modeling; Mixing (physics); Composite material; Material properties; Deposition (geology); 3D printing; Material flow; Ultimate tensile strength; 3d printed; Material selection; Die (integrated circuit); Mechanical engineering; Structural engineering; Engineering drawing; Engineering; Nanotechnology","retraction":null,"screen_n_in":null,"score":{"opus":0.0223432224134347,"gpt":0.2272774713087871,"spread":0.2049342488953524,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001984983,0.0002195729,0.0002589347,0.0001413452,0.0001692189,0.00008294966,0.0008559321,0.000103188,0.000002986388],"category_scores_gemma":[0.000158305,0.0001008354,0.00007380729,0.00008453786,0.0002071096,0.0001185997,0.0001893234,0.000513765,0.00000108929],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001037304,"about_ca_system_score_gemma":0.00001514433,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003357033,"about_ca_topic_score_gemma":0.0000066551,"domain_scores_codex":[0.9988953,0.00004087734,0.0004240779,0.0001515993,0.0002602759,0.000227855],"domain_scores_gemma":[0.9991758,0.0001429546,0.0003085069,0.0002124882,0.0001254403,0.00003479972],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0005549373,0.00004494891,0.000009395389,0.00002583623,0.000432982,0.00001913336,0.0002292968,0.3939555,0.5822331,0.0001834373,0.000008657793,0.0223028],"study_design_scores_gemma":[0.0004434333,0.0002042687,0.0000289261,0.0001705979,0.0000193717,0.000126005,0.0007641762,0.2408256,0.7571205,0.0001801317,0.00001778991,0.00009925484],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9357209,0.0003525659,0.06070361,0.002523103,0.0002392982,0.0001968086,0.000008254283,0.0002497116,0.000005821283],"genre_scores_gemma":[0.9976548,0.0001320098,0.002074894,0.00002573538,0.00006103198,0.00001470636,0.000001062727,0.00003272503,0.000003012657],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1748873,"threshold_uncertainty_score":0.4111949,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4389687853","doi":"10.1016/j.matdes.2023.112558","title":"3D printing in upcycling plastic and biomass waste to sustainable polymer blends and composites: A review","year":2023,"lang":"en","type":"review","venue":"Materials & Design","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":129,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"","keywords":"Materials science; Biomass (ecology); Ductility (Earth science); Waste management; Municipal solid waste; 3D printing; Composite material; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.04276232471600959,"gpt":0.2821277538551202,"spread":0.2393654291391106,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0008720928,0.0005215204,0.001664231,0.0005320981,0.00008315119,0.0001886857,0.0002529997,0.0002408179,0.00001981354],"category_scores_gemma":[0.0003773948,0.0004622301,0.00005439518,0.000386138,0.00004774953,0.0000701169,0.0004832611,0.0002244741,0.00004782562],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008442243,"about_ca_system_score_gemma":0.00003313919,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003399722,"about_ca_topic_score_gemma":0.000001250382,"domain_scores_codex":[0.9979163,0.0001721096,0.0007338636,0.0004782387,0.0001102629,0.0005892495],"domain_scores_gemma":[0.9988159,0.0006465262,0.000140954,0.0003065298,0.00001921882,0.00007086257],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"systematic_review","study_design_gemma":"systematic_review","study_design_scores_codex":[0.000009037139,0.0000131459,0.000002291221,0.5183311,0.0002717887,0.0003194093,0.0001419097,0.00009431613,0.001400381,0.0003045971,0.0007371619,0.4783749],"study_design_scores_gemma":[0.0004547212,0.0001820403,0.00001896777,0.4839431,0.001280227,0.0001794964,0.0002623349,0.0001536343,0.07122869,0.0004145658,0.438857,0.003025134],"study_design_candidate":"systematic_review","study_design_consensus":"systematic_review","genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.001279724,0.9943936,0.001925655,0.00001877325,0.0002435832,0.001134733,0.00002818437,0.0009375431,0.00003821958],"genre_scores_gemma":[0.0006240445,0.9967868,0.001855878,0.000009956279,0.00007688363,0.0003414105,0.00001884366,0.0001428852,0.0001433333],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.4753497,"threshold_uncertainty_score":0.9997829,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2571014468","doi":"10.1680/jbibn.16.00010","title":"Biomimetics and its tools","year":2017,"lang":"en","type":"article","venue":"Bioinspired Biomimetic and Nanobiomaterials","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":127,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"","keywords":"Biomimetics; Process (computing); Computer science; Sustainability; Management science; Face (sociological concept); Systems engineering; Engineering; Engineering ethics; Process management; Artificial intelligence; Sociology; Ecology","retraction":null,"screen_n_in":null,"score":{"opus":0.0323668348969444,"gpt":0.2394438770440999,"spread":0.2070770421471554,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002030577,0.0002480987,0.0003143676,0.0001234545,0.0003957935,0.0004901842,0.0002725153,0.0001947333,0.0000215812],"category_scores_gemma":[0.0001774399,0.0002111648,0.00003453897,0.00003404834,0.0003047846,0.0001770551,0.0002832074,0.00003936471,0.00003786325],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001296485,"about_ca_system_score_gemma":0.000006314535,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000008853156,"about_ca_topic_score_gemma":5.501337e-7,"domain_scores_codex":[0.9990844,0.00001839653,0.0002483537,0.0002742511,0.00007583557,0.0002987443],"domain_scores_gemma":[0.9993385,0.00004785625,0.00009451473,0.00041398,0.00002241197,0.00008271345],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001308874,0.0000107239,0.0002811232,0.0001463123,0.00005938249,0.00001168549,0.00004148344,2.140252e-7,0.9443028,0.0008247469,0.0002509984,0.05405746],"study_design_scores_gemma":[0.0004078299,0.00005467823,0.02395657,0.00006368544,0.00003111204,0.00002277067,0.00002211739,0.0001663246,0.9703781,0.0005003685,0.004092197,0.0003042496],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.99654,0.0009276741,0.00007195032,0.0001865511,0.0005682356,0.0001954253,0.0001017084,0.0007352438,0.0006732691],"genre_scores_gemma":[0.9975277,0.0008466432,0.001403246,0.00001484966,0.00007655136,0.00001659072,0.000008978763,0.00003139648,0.00007399858],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.05375321,"threshold_uncertainty_score":0.8611052,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2175237303","doi":"10.22215/timreview/942","title":"3D Printing and Its Disruptive Impacts on Supply Chains of the Future","year":2015,"lang":"en","type":"article","venue":"Technology Innovation Management Review","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":124,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":true,"about_ca":false},"ca_institutions":"","funders":"Economic and Social Research Council","keywords":"Supply chain; Business; Disruptive technology; Emerging technologies; Disruptive innovation; Industrial organization; Commerce; Marketing; Engineering; Computer science; Manufacturing engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.02073614898776352,"gpt":0.2613478907733783,"spread":0.2406117417856148,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003234875,0.0001484415,0.0002073386,0.0003360142,0.00004513387,0.000007199129,0.0002839776,0.00009861948,0.000007074689],"category_scores_gemma":[0.0001597188,0.0001049327,0.00002129155,0.001325502,0.0000735272,0.00005219125,0.0002747546,0.0002665052,0.00001217508],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004376832,"about_ca_system_score_gemma":0.000004700623,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":3.015182e-7,"about_ca_topic_score_gemma":5.837272e-7,"domain_scores_codex":[0.9992512,0.00001425497,0.0002874115,0.0001572399,0.0001269046,0.0001629555],"domain_scores_gemma":[0.9993878,0.00001202551,0.0001388041,0.0003580907,0.00009280037,0.00001048359],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"theoretical_or_conceptual","study_design_gemma":"not_applicable","study_design_scores_codex":[0.00000207251,0.00001931571,0.001064976,0.00267759,0.0001025203,0.000003573776,0.00004158018,0.00006661346,0.0001508396,0.5362988,0.003999065,0.4555731],"study_design_scores_gemma":[0.002096726,0.0004520741,0.05914931,0.02476793,0.0004132648,0.00006126075,0.002427507,0.001925067,0.1663612,0.0399283,0.7006498,0.001767572],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9293128,0.03414432,0.001671389,0.01671684,0.0005394765,0.00198706,0.00001479751,0.00291158,0.01270174],"genre_scores_gemma":[0.9864011,0.01204877,0.001100538,0.0002291519,0.00002294073,0.00005743593,0.000004672738,0.0000160854,0.000119315],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6966507,"threshold_uncertainty_score":0.4279032,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2902692830","doi":"10.3390/ma11122386","title":"A Comprehensive Approach to Powder Feedstock Characterization for Powder Bed Fusion Additive Manufacturing: A Case Study on AlSi7Mg","year":2018,"lang":"en","type":"article","venue":"Materials","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":119,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Raw material; Cohesion (chemistry); Particle size; Particle-size distribution; Composite material; Rheology; Metal powder; Particle (ecology); Porosity; Moisture; Bulk density; Powder metallurgy; Sintering; Metallurgy; Chemical engineering; Metal; Environmental science","retraction":null,"screen_n_in":null,"score":{"opus":0.03403941607836966,"gpt":0.2629380554157574,"spread":0.2288986393373877,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001417906,0.0003519806,0.0003972053,0.0002383474,0.0002362285,0.0001365406,0.0002041737,0.0001452369,0.0001151478],"category_scores_gemma":[0.00004356349,0.0003190406,0.0000505886,0.00008937799,0.00005421981,0.00009361103,0.0001650487,0.00009662965,0.0001432422],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000805178,"about_ca_system_score_gemma":0.000006379415,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003460671,"about_ca_topic_score_gemma":0.000002697416,"domain_scores_codex":[0.9985974,0.00006159647,0.0003314827,0.0004531407,0.0001534206,0.0004029317],"domain_scores_gemma":[0.9992344,0.00008607208,0.00008256771,0.0004205044,0.0001039074,0.00007259238],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0004958026,0.0006638398,0.00003468571,0.0003227946,0.0004240799,0.0001974871,0.009122364,0.0001162671,0.9488136,0.0002223314,0.004318031,0.03526871],"study_design_scores_gemma":[0.0006473243,0.0006083769,0.00655264,0.00004639963,0.00003180463,0.00008978297,0.002173398,0.00005095158,0.9821974,0.00008283898,0.007109886,0.0004091685],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9910913,0.000001818656,0.004179209,0.00004279301,0.0007142114,0.001997049,0.0004586754,0.001152275,0.0003627061],"genre_scores_gemma":[0.997281,0.000001549065,0.001186598,0.000127225,0.0004141342,0.0006011917,0.0001855992,0.00008518978,0.0001175695],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03485954,"threshold_uncertainty_score":0.9999261,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3091164160","doi":"10.1039/d0ra04857g","title":"Recent advances in additive manufacturing of engineering thermoplastics: challenges and opportunities","year":2020,"lang":"en","type":"review","venue":"RSC Advances","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":115,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph; Discovery Centre","funders":"FedDev Ontario; Natural Sciences and Engineering Research Council of Canada; Ontario Ministry of Agriculture, Food and Rural Affairs; Ontario Ministry of Economic Development, Job Creation and Trade; University of Guelph","keywords":"Manufacturing engineering; Biochemical engineering; Process engineering; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.04930551966992902,"gpt":0.2658385135846044,"spread":0.2165329939146753,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.00009718077,0.0005581472,0.001467441,0.0003359884,0.00002554104,0.00001545218,0.0002987272,0.0002225743,0.0000192768],"category_scores_gemma":[0.0001339409,0.0004964426,0.0001132493,0.00007856705,0.0001160969,0.0002806968,0.0001713112,0.0005714289,0.000004841118],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007705412,"about_ca_system_score_gemma":0.00002485011,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":2.894554e-7,"about_ca_topic_score_gemma":0.000004891705,"domain_scores_codex":[0.9985237,0.00003729343,0.0005491498,0.0003876137,0.0001571656,0.0003450525],"domain_scores_gemma":[0.9988985,0.0005961218,0.0001959857,0.0002244861,0.00001969083,0.00006521201],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000001894109,0.000005748766,6.707641e-8,0.0134456,0.00005957382,0.00003512988,0.0001152952,0.0003310046,1.83102e-7,0.0004542346,0.00000596167,0.9855453],"study_design_scores_gemma":[0.00007678936,0.00003947493,0.000004779812,0.009417156,0.0000676491,0.00001558208,0.0002919261,0.00009378482,0.0006781922,0.0003897444,0.9884661,0.0004587687],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00001787763,0.9967271,0.0002777806,0.00001886157,0.0002685643,0.0002623093,0.0001305262,0.0005630328,0.001733912],"genre_scores_gemma":[0.0003372923,0.9985507,0.0007869579,0.000002155258,0.00009825375,0.0001031395,0.00002647571,0.00008758376,0.000007401507],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9884602,"threshold_uncertainty_score":0.9997487,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2902170675","doi":"10.1016/j.mtcomm.2018.12.003","title":"The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication","year":2018,"lang":"en","type":"article","venue":"Materials Today Communications","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":115,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Toronto Metropolitan University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Fused filament fabrication; Materials science; Ultimate tensile strength; 3D printing; Composite material; Fabrication; Anisotropy; Modulus; Transverse plane; Fused deposition modeling; Perpendicular; Structural engineering; Geometry; Optics","retraction":null,"screen_n_in":null,"score":{"opus":0.0278148125002752,"gpt":0.2563482974711744,"spread":0.2285334849708992,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002033235,0.0001344645,0.0001907592,0.00005477868,0.0001742994,0.00003152405,0.0006312673,0.00006726401,0.00004384038],"category_scores_gemma":[0.0001945557,0.00008608225,0.00004561904,0.00007525952,0.000346387,0.00003675824,0.0002028448,0.00008654844,0.00002000095],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000529058,"about_ca_system_score_gemma":0.00001301228,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001048399,"about_ca_topic_score_gemma":0.000008995482,"domain_scores_codex":[0.9992445,0.0000942862,0.0003176964,0.00009603538,0.00009171889,0.0001557499],"domain_scores_gemma":[0.9981656,0.0001277951,0.0001535301,0.001409382,0.0001259407,0.00001773595],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002876878,0.00007121886,0.00006148743,0.00003429045,0.00009900444,3.892533e-8,0.0003833306,0.000287894,0.9897506,0.0002295233,0.005381647,0.003672168],"study_design_scores_gemma":[0.0001000416,0.0001012271,0.007051233,0.00008872528,0.00001114898,4.355055e-7,0.0000626847,0.0002798292,0.9901066,0.0002295717,0.001878055,0.00009044436],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9978698,0.0001772244,0.0002103233,0.0001514984,0.00009971984,0.0002901696,0.00008749,0.0002946885,0.0008190427],"genre_scores_gemma":[0.9990562,0.000208699,0.0005312642,0.000005205986,0.00001659883,0.00007239627,0.00004244977,0.00001992058,0.00004728619],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.006989746,"threshold_uncertainty_score":0.3510332,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2957764147","doi":"10.1145/3306346.3323022","title":"CurviSlicer","year":2019,"lang":"en","type":"article","venue":"ACM Transactions on Graphics","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":114,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Victoria","funders":"Chinese University of Hong Kong; Agence Nationale de la Recherche; National Science Foundation","keywords":"Slicing; Fabrication; Planar; Fused filament fabrication; Surface (topology); Solver; Stacking; Deposition (geology); Computer science; Focus (optics); Regular polygon; Plane (geometry); Deformation (meteorology); Geometry; Materials science; Computational science; Computer graphics (images); Composite material; Optics; 3D printing; Mathematics; Geology; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01353868047615412,"gpt":0.2162492418169155,"spread":0.2027105613407613,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0000429413,0.0001105842,0.00008877362,0.0001696689,0.00005495978,0.00001598916,0.000239224,0.00008300934,0.0001927339],"category_scores_gemma":[0.000008489134,0.0001078105,0.00007077568,0.0001923953,0.00003208334,0.00005905083,0.000003704197,0.0003400736,0.0003991703],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001401544,"about_ca_system_score_gemma":0.000003033132,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004210425,"about_ca_topic_score_gemma":0.000005192151,"domain_scores_codex":[0.9995306,0.000006359799,0.00008552733,0.0001280778,0.00008966021,0.0001598231],"domain_scores_gemma":[0.9993523,0.0000865206,0.000009242793,0.0005146489,0.00001366327,0.00002366945],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000352594,0.0002385896,0.001575544,0.0003300695,0.00059244,0.00001290891,0.0005992053,0.09989394,0.003595189,0.01020442,0.00457615,0.8783463],"study_design_scores_gemma":[0.001606377,0.0004655416,0.04114519,0.0002602865,0.0001264359,0.00003405142,0.0006034215,0.01887614,0.6047497,0.06237807,0.2676207,0.002134063],"study_design_candidate":"design_other","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8731575,0.00004464088,0.1155983,0.0004236979,0.0007743792,0.0001596663,0.00002346298,0.003303875,0.006514413],"genre_scores_gemma":[0.9979553,0.0001430544,0.001548416,0.00007746469,0.00001170991,0.000014065,0.000002121454,0.00002471031,0.0002231718],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8762122,"threshold_uncertainty_score":0.5130659,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4220973988","doi":"10.1021/acsami.2c02076","title":"3D Printing of Short-Carbon-Fiber-Reinforced Thermoset Polymer Composites via Frontal Polymerization","year":2022,"lang":"en","type":"article","venue":"ACS Applied Materials & Interfaces","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":113,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"National Research Council Canada; Colorado State University","keywords":"Thermosetting polymer; Materials science; Composite material; Curing (chemistry); 3D printing; Composite number; Extrusion; Epoxy; Polymer; Polymerization","retraction":null,"screen_n_in":null,"score":{"opus":0.007947128513433023,"gpt":0.1972871887056785,"spread":0.1893400601922455,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001535524,0.0002585047,0.0003525341,0.0001323203,0.0001266432,0.00004988383,0.0004138208,0.00008078841,0.0008920901],"category_scores_gemma":[0.000007261824,0.0002631185,0.00001948523,0.0001012164,0.00008807309,0.00005585947,0.0005248666,0.0001706759,0.00001441891],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004819711,"about_ca_system_score_gemma":0.000006868323,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00006318004,"about_ca_topic_score_gemma":7.400205e-7,"domain_scores_codex":[0.998794,0.00002913084,0.0004413519,0.000242266,0.0002000294,0.0002931774],"domain_scores_gemma":[0.9994783,0.00005269228,0.0001265449,0.0003073186,0.0000143392,0.00002077005],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004038909,0.00001177638,0.00001819489,0.00005971066,0.00008899195,0.000001086408,0.0002746881,0.004643261,0.9863979,0.0002882217,0.00003744178,0.008138396],"study_design_scores_gemma":[0.0001457249,0.00004666475,0.00013557,0.00002004782,0.00002397152,0.000005505642,0.0002951493,0.0001836669,0.9987166,0.00009029695,0.00006816089,0.0002686779],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9938497,0.0001269207,0.0003803265,0.00001851968,0.000387741,0.0002383035,0.00009029709,0.0008613429,0.00404688],"genre_scores_gemma":[0.9991254,0.000009835891,0.0004279603,0.00001320496,0.00004781147,0.0001143665,0.00008695204,0.00006193668,0.0001125763],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01231872,"threshold_uncertainty_score":0.9999821,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null}]}