{"meta":{"page":1,"per_page":50,"max_per_page":100,"total":227,"total_is_capped":false,"direct_labels_cover":1,"predictions_cover":227,"direct_label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline (scores rank; they never assert a category)","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"query_hash":"bf32c9a3a405","filters":{"topic":"Injection Molding Process and Properties"}},"results":[{"id":"W2054106700","doi":"10.1016/j.jmatprotec.2007.10.066","title":"Fabrication of metal matrix composites by metal injection molding—A review","year":2007,"lang":"en","type":"article","venue":"Journal of Materials Processing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":181,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada; Western University","funders":"","keywords":"Fabrication; Materials science; Molding (decorative); Composite number; Composite material; Metal injection molding; Metal matrix composite; Matrix (chemical analysis); Metal; Metallurgy; Sintering","retraction":null,"screen_n_in":null,"score":{"opus":0.010320495521401,"gpt":0.2596951543436318,"spread":0.2493746588222308,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001004984,0.0001457286,0.0004793312,0.0004415603,0.00006360115,0.00002765386,0.0002154033,0.0001693265,0.00005429571],"category_scores_gemma":[0.0001224188,0.0001197832,0.00005786281,0.0004678593,0.00007256851,0.0002882295,0.00002603042,0.000180449,0.000003472646],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005871927,"about_ca_system_score_gemma":0.00002708943,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004142155,"about_ca_topic_score_gemma":3.680805e-7,"domain_scores_codex":[0.998621,0.00002321373,0.0008900869,0.00009306266,0.0001907423,0.0001818882],"domain_scores_gemma":[0.9988331,0.00001762595,0.0005993661,0.0001012321,0.0004208572,0.00002779807],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003585335,0.00002946632,0.00004856095,0.001901411,0.00005568537,0.000002404254,0.00004552794,0.0002685526,0.9772854,0.00006607423,0.0007605085,0.01950051],"study_design_scores_gemma":[0.0001644873,0.00019279,0.00002894272,0.0009889336,0.0001089678,0.000365785,0.00006174523,0.00007260697,0.9947298,0.0004481034,0.002715351,0.0001224491],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.910726,0.06668337,0.0212979,0.0001727579,0.0006937405,0.0001127206,0.000005127165,0.0001987161,0.0001096847],"genre_scores_gemma":[0.9918651,0.002742145,0.005206672,0.00002529291,0.00009750378,0.000003760455,0.000002803232,0.00002685341,0.00002987867],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.08113911,"threshold_uncertainty_score":0.4884615,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2102302523","doi":"10.1002/pen.11015","title":"Residual thermal stresses in injection moldings of thermoplastics: A theoretical and experimental study","year":2002,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":80,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Materials science; Composite material; Residual stress; Viscoelasticity; Molding (decorative); Shrinkage; Stress (linguistics); Polystyrene; Creep; Finite element method; Thermal; Polymer; Structural engineering; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.00816533247933371,"gpt":0.2045208762849441,"spread":0.1963555438056104,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001235946,0.00008597662,0.00009132385,0.0001529145,0.000049016,0.0000399799,0.00006174036,0.00002211704,0.00002424007],"category_scores_gemma":[0.00002075048,0.00007300666,0.00000620114,0.0002041749,0.0001735465,0.0001424476,0.00002951828,0.000078471,3.947223e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000117759,"about_ca_system_score_gemma":0.000003373505,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002397804,"about_ca_topic_score_gemma":9.031918e-7,"domain_scores_codex":[0.9994766,0.00000573242,0.0001129212,0.0001278599,0.0001270052,0.0001498956],"domain_scores_gemma":[0.9998561,0.00002719538,0.000009224128,0.00005759564,0.00001121676,0.00003862997],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003436622,0.0002619919,0.01907087,0.0001759276,0.00002821649,0.000009344533,0.03273474,0.1787003,0.7553741,0.005115084,0.000009203772,0.008485826],"study_design_scores_gemma":[0.00036686,0.0003767487,0.00973753,0.00006454387,0.000007014217,0.00002239769,0.001746556,0.4546557,0.5327933,0.00001277945,0.000004238901,0.0002123172],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9968478,0.002564485,0.00008327006,0.000006384505,0.00010276,0.00005037264,8.05259e-7,0.00005625685,0.000287879],"genre_scores_gemma":[0.9998636,0.00003070381,0.00005565027,0.000002583683,0.00001978902,0.000008355507,4.127744e-8,0.000009107764,0.00001012185],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2759554,"threshold_uncertainty_score":0.2977125,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2066886122","doi":"10.1002/pen.10718","title":"Melting and densification of thermoplastic powders","year":2001,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":71,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University; Queen's University","funders":"","keywords":"Materials science; Coalescence (physics); Surface tension; Shrinkage; Thermoplastic; Viscosity; Composite material; Polymer; Melting point; Particle (ecology); Dissolution; Thermodynamics; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.008103773758132937,"gpt":0.1855931465239561,"spread":0.1774893727658232,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00009873818,0.00005174316,0.0000530378,0.00009003351,0.00005541978,0.0000259823,0.00004102317,0.00001465283,0.000002832479],"category_scores_gemma":[0.00002306983,0.00004590912,0.000005345993,0.0001894138,0.00007081321,0.0001092929,0.00001058465,0.00003789843,4.693158e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000005865533,"about_ca_system_score_gemma":0.000005778837,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000123987,"about_ca_topic_score_gemma":4.245268e-7,"domain_scores_codex":[0.9996658,0.000001300535,0.00007045382,0.00007956186,0.00007291653,0.0001099972],"domain_scores_gemma":[0.9998733,0.00001728627,0.000008695088,0.0000476469,0.00001735157,0.00003573626],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000002914257,0.000003079626,0.002718786,0.0001130117,0.000007203218,7.669469e-7,0.001409345,0.03836217,0.9243304,0.001284796,0.000003387219,0.03176411],"study_design_scores_gemma":[0.00008428965,0.00002041708,0.008647386,0.00005507794,0.000006906774,0.00003951988,0.0001585076,0.7632775,0.2273698,0.00001687044,0.0001781191,0.0001455708],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9904169,0.00248609,0.006572825,0.000015366,0.0001157714,0.00001669419,2.786885e-7,0.0000763666,0.0002997306],"genre_scores_gemma":[0.9995446,0.000163046,0.0002360827,0.000004182903,0.00001363932,0.000001830816,7.793177e-8,0.000006044208,0.00003048324],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7249153,"threshold_uncertainty_score":0.1872119,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2165136139","doi":"10.1109/6104.895075","title":"Modeling of time-pressure fluid dispensing processes","year":2000,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":62,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Fluid dynamics; Fluid pressure; Process (computing); Materials science; Volumetric flow rate; Flow (mathematics); Mechanical engineering; Process engineering; Computer science; Mechanics; Engineering; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.007564136803124713,"gpt":0.1922164563825065,"spread":0.1846523195793818,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001151431,0.0002819716,0.0002709547,0.0001924101,0.0002569299,0.0000665668,0.0001758707,0.0001058279,0.0004284616],"category_scores_gemma":[0.000002145386,0.0002832357,0.00009789479,0.000197829,0.00003028953,0.0003087909,8.337593e-7,0.0004429278,0.00005645679],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007911962,"about_ca_system_score_gemma":0.00005288718,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003117706,"about_ca_topic_score_gemma":0.00003226066,"domain_scores_codex":[0.9986462,0.00002108562,0.0003291535,0.0002691787,0.0002383089,0.0004960967],"domain_scores_gemma":[0.9995575,0.00003724041,0.00002622134,0.0002608896,0.00005418354,0.00006396236],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003932027,0.00002606711,6.371822e-7,0.0003149467,0.00009808374,0.000001159236,0.0003182468,0.958496,0.006733855,0.000002077835,0.00001092065,0.03395872],"study_design_scores_gemma":[0.0001404079,0.00004427489,8.362371e-7,0.0001209683,0.00005152492,0.00001554729,0.00001865177,0.4910358,0.5075547,0.00009008306,0.000710171,0.0002171607],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.641132,0.001586012,0.3528478,0.00004044957,0.0002402156,0.0002022822,0.00001507191,0.0008465193,0.003089701],"genre_scores_gemma":[0.9974656,0.001194151,0.0003217202,0.00002784001,0.00004844889,0.00001684882,0.000002418453,0.00008526343,0.0008376766],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5008208,"threshold_uncertainty_score":0.999962,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2150862675","doi":"10.1109/tepm.2006.874964","title":"Effects of Fluid Properties on Dispensing Processes for Electronics Packaging","year":2006,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":54,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Materials science; Electronics; Electronic packaging; Printed circuit board; Coating; Epoxy; Surface tension; Adhesive; Integrated circuit packaging; Process engineering; Composite material; Mechanical engineering; Integrated circuit; Engineering; Electrical engineering; Optoelectronics","retraction":null,"screen_n_in":null,"score":{"opus":0.007399130290290004,"gpt":0.1909744074363162,"spread":0.1835752771460262,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001806429,0.0005030928,0.0004426583,0.0003989137,0.0004826995,0.0001295286,0.0002242446,0.0001517967,0.00000554963],"category_scores_gemma":[0.00001304392,0.0004702813,0.0001899994,0.0002709271,0.00006317065,0.0003092007,0.00000202993,0.0005697519,0.00000712066],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0003963461,"about_ca_system_score_gemma":0.0001259344,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002787423,"about_ca_topic_score_gemma":0.0001160447,"domain_scores_codex":[0.9977656,0.00003421826,0.0004841274,0.0004505676,0.0002986374,0.0009668713],"domain_scores_gemma":[0.9991871,0.0002316119,0.0001052858,0.0002924595,0.0001178993,0.00006567121],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001995603,0.0001550836,0.00000650454,0.00321297,0.0001660682,0.000002442019,0.0003007985,0.802354,0.1749603,0.0001583912,0.00008016269,0.0184037],"study_design_scores_gemma":[0.0006605796,0.0003788478,0.00002765628,0.000536956,0.0001121081,0.00001524848,0.00003386994,0.01345242,0.9820349,0.0007317489,0.001485791,0.0005298496],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.6052643,0.003274971,0.3888608,0.0001012147,0.0006013635,0.0007594498,0.00001199559,0.0008090998,0.0003168256],"genre_scores_gemma":[0.998011,0.0006992209,0.0004266479,0.00005654812,0.0001403212,0.0001894535,0.000005471104,0.0001738552,0.0002974864],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8070747,"threshold_uncertainty_score":0.9997749,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2000641801","doi":"10.1016/j.matlet.2008.03.027","title":"Sintering of 17-4PH stainless steel feedstock for metal injection molding","year":2008,"lang":"en","type":"article","venue":"Materials Letters","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":50,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada; Western University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Sintering; Materials science; Raw material; Metal injection molding; Metallurgy; Molding (decorative); Hydrogen; Metal; Atmosphere (unit); Atmospheric temperature range; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.02280263611060764,"gpt":0.2077263498149872,"spread":0.1849237137043796,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001401217,0.0001453255,0.0002396117,0.0001192473,0.0001084138,0.00003330446,0.0000906166,0.00005340359,0.00009301219],"category_scores_gemma":[0.00001308321,0.0001399154,0.000057812,0.00007528125,0.0000369084,0.00017405,0.00002144263,0.00004507406,0.000004303624],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005356352,"about_ca_system_score_gemma":0.000006472004,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004996677,"about_ca_topic_score_gemma":0.00000183761,"domain_scores_codex":[0.9992471,0.00001730759,0.0002912905,0.0001300196,0.00009970782,0.0002145557],"domain_scores_gemma":[0.9997505,0.00001913422,0.00005805572,0.000109074,0.00003895963,0.00002426947],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004995655,0.000005860446,0.00005265416,0.0003495708,0.00004500677,0.000001712628,0.0006286659,0.0349662,0.9622331,0.00002726322,0.001378257,0.0002617249],"study_design_scores_gemma":[0.0002756597,0.00006791199,0.0002699854,0.00006232874,0.0000178171,0.00003545751,0.000100016,0.0008482223,0.9962471,0.00001943211,0.001863571,0.0001924972],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9863661,0.00007576712,0.01172416,0.00004841668,0.00124875,0.0001937132,0.00002726976,0.000199432,0.0001163974],"genre_scores_gemma":[0.9984849,0.00001424846,0.0009737746,0.0001067969,0.0002013458,0.00006761715,0.00000834522,0.00004490653,0.00009806679],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03411798,"threshold_uncertainty_score":0.5705586,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4400698187","doi":"10.1016/j.heliyon.2024.e34655","title":"Linking mechanochemistry with the green chemistry principles: Review article","year":2024,"lang":"en","type":"review","venue":"Heliyon","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":47,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"Universitat Politècnica de Catalunya; United Nations Educational, Scientific and Cultural Organization","keywords":"Mechanochemistry; Ball mill; Nanotechnology; Extrusion; Green chemistry; Process engineering; Materials science; Mechanical engineering; Engineering; Chemistry; Chemical engineering; Organic chemistry; Metallurgy; Catalysis; Reaction mechanism","retraction":null,"screen_n_in":null,"score":{"opus":0.03765017602331658,"gpt":0.2661883546077822,"spread":0.2285381785844656,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000188311,0.0003386899,0.000587312,0.00001902524,0.00007511269,0.00007963125,0.0002660418,0.0001827765,0.0001145865],"category_scores_gemma":[0.000009593582,0.0001764157,0.000182673,0.0003005347,0.00002664726,0.00003588617,0.00006135504,0.0006657675,0.0001942537],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008131163,"about_ca_system_score_gemma":0.00007751294,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001217615,"about_ca_topic_score_gemma":0.000001356023,"domain_scores_codex":[0.9990335,0.00001592814,0.0003019028,0.0002420757,0.0001823146,0.0002242964],"domain_scores_gemma":[0.9994613,0.00002211186,0.00006397046,0.0003703377,0.00003865538,0.00004365014],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"systematic_review","study_design_gemma":"not_applicable","study_design_scores_codex":[4.837654e-7,0.000002223082,5.006403e-8,0.7548735,0.0001024631,0.000009061956,0.0000439858,0.00003373079,0.00001619207,0.000008616084,0.0005447021,0.244365],"study_design_scores_gemma":[0.00001355692,0.000004145995,6.13006e-9,0.2307326,0.0005822145,0.00008911573,0.000006971739,0.0000418737,0.0002897296,0.000002436695,0.7680356,0.0002017555],"study_design_candidate":"systematic_review","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.000002642836,0.9951497,0.00006673084,0.00007506546,0.0001223882,0.0002528731,0.00001000839,0.0003876252,0.003933003],"genre_scores_gemma":[0.00000574129,0.9941759,0.00004040885,0.00006578562,0.0003576961,0.0002232755,0.00001986955,0.0001020849,0.005009267],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.7674909,"threshold_uncertainty_score":0.7194022,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2186696467","doi":"10.1109/tepm.2003.820824","title":"Off-line control of time-pressure dispensing processes for electronics packaging","year":2003,"lang":"en","type":"article","venue":"IEEE Transactions on Electronics Packaging Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":47,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University; University of Saskatchewan","funders":"","keywords":"Electronics; Pressure control; Electronic packaging; Process control; Process (computing); Computer science; Mechanical engineering; Materials science; Engineering; Electronic engineering; Electrical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.008518147756332566,"gpt":0.2086201863122019,"spread":0.2001020385558694,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0003758993,0.0004719012,0.0005200025,0.0003195816,0.0004210077,0.0001034726,0.000221923,0.0001732719,0.00005208512],"category_scores_gemma":[0.00002881413,0.0004778686,0.000204405,0.0002807221,0.00005676571,0.0003327056,0.000001194735,0.0006498828,0.00001019237],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002025323,"about_ca_system_score_gemma":0.0001895094,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00000538152,"about_ca_topic_score_gemma":0.00005019699,"domain_scores_codex":[0.9977355,0.00005571365,0.0005298168,0.000434949,0.0002656561,0.0009783719],"domain_scores_gemma":[0.9989758,0.0002524602,0.00013196,0.0003647665,0.0001721529,0.0001028456],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001161146,0.00007931229,0.00001117917,0.000930868,0.0004055937,0.000001149653,0.0002581912,0.9493068,0.02972944,0.0001274199,0.00004446863,0.01898951],"study_design_scores_gemma":[0.001059578,0.0002575702,0.000004062799,0.0001845695,0.0002507974,0.00003462372,0.00004528487,0.06175219,0.9238576,0.0007423093,0.01128206,0.0005293324],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.07193812,0.006318499,0.9194281,0.00009632008,0.0004705741,0.0006068294,0.00005352601,0.0006153611,0.0004727051],"genre_scores_gemma":[0.996998,0.001282455,0.0008200001,0.00007045177,0.00006538803,0.00009085396,0.000006159027,0.0001617988,0.0005049508],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.9250598,"threshold_uncertainty_score":0.9997673,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1999382214","doi":"10.1002/pen.20595","title":"Injection molding shrinkage of PP: Experimental progress","year":2006,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":46,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Shrinkage; Mold; Molding (decorative); Materials science; Flow (mathematics); Composite material; Factorial experiment; Anisotropy; Engineering drawing; Geometry; Mathematics; Optics; Physics; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.006065333649550034,"gpt":0.2028023042751661,"spread":0.1967369706256161,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001026954,0.00008934741,0.0000825305,0.0001236731,0.00008138931,0.00004771022,0.00008065486,0.00002509471,0.00000782013],"category_scores_gemma":[0.00000376613,0.00008361735,0.00001586168,0.0003001665,0.0001138688,0.0002122681,0.00002234911,0.00005857429,9.302879e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002294359,"about_ca_system_score_gemma":0.000008847677,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000046012,"about_ca_topic_score_gemma":5.173774e-7,"domain_scores_codex":[0.9994296,0.000001849093,0.0001200083,0.000120892,0.0001431102,0.0001845021],"domain_scores_gemma":[0.9998538,0.00000613852,0.00001399286,0.00007168853,0.00001920188,0.00003516524],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000003373506,0.00001782517,0.001460675,0.0001178259,0.000005732198,0.000001214349,0.0005212205,0.143017,0.8470693,0.002746519,0.00003239355,0.005006899],"study_design_scores_gemma":[0.00006451372,0.00003029102,0.001249335,0.00002996075,0.000002241308,0.00001618852,0.00005018333,0.1436592,0.8546434,0.000006618028,0.0001390622,0.0001090128],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9882944,0.009286077,0.001127085,0.000004880665,0.0003390622,0.00003644531,0.00000126132,0.0002061293,0.0007046596],"genre_scores_gemma":[0.9994168,0.00001725676,0.0004363912,0.000002022539,0.00005462878,0.00001026178,3.264639e-7,0.00001197213,0.00005036395],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01112238,"threshold_uncertainty_score":0.3409817,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2156404620","doi":"10.1002/nme.370","title":"Three‐dimensional finite element solution of gas‐assisted injection moulding","year":2001,"lang":"en","type":"article","venue":"International Journal for Numerical Methods in Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":45,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Finite element method; Conservation of mass; Injection moulding; Compressibility; Momentum (technical analysis); Viscosity; Mechanics; Energy conservation; Mechanical engineering; Polymer; Materials science; Flow (mathematics); Thermodynamics; Engineering; Composite material; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.04484939112372518,"gpt":0.3505847384550066,"spread":0.3057353473312814,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006861809,0.0001499195,0.0002067112,0.0004172352,0.00005296914,0.00004501438,0.0001812618,0.00008198575,0.00005577141],"category_scores_gemma":[0.0003349425,0.0001459293,0.0001224303,0.0002511604,0.00001257423,0.0002131533,0.00002953205,0.0003132488,0.000001321264],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002723299,"about_ca_system_score_gemma":0.00001710725,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002589764,"about_ca_topic_score_gemma":0.000003322123,"domain_scores_codex":[0.9988038,0.00002643186,0.0005388627,0.0001255948,0.0002721764,0.0002331345],"domain_scores_gemma":[0.9993284,0.0002459692,0.00009166423,0.00006459968,0.0002102353,0.00005913077],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00006819084,0.00002636514,0.0004256096,0.00003302654,0.00008269971,0.000005248394,0.00006553777,0.8858269,0.02005127,0.0001717539,0.00006552415,0.09317789],"study_design_scores_gemma":[0.0004630512,0.00009150695,0.0006872973,0.000150842,0.00001205344,0.0002279425,0.00001885079,0.980714,0.01162151,0.0009389083,0.004907145,0.0001669109],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.01923895,0.00038061,0.9760663,0.00009889193,0.003949045,0.00009284045,0.000004306876,0.00008499618,0.00008408316],"genre_scores_gemma":[0.5737417,0.00008459482,0.425652,0.00002241103,0.0003972249,0.00003324908,0.000005013504,0.00003846231,0.00002534425],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.5545028,"threshold_uncertainty_score":0.5950823,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2167500414","doi":"10.1016/j.compositesa.2015.11.006","title":"Compression moulding of Carbon/PEEK Randomly-Oriented Strands composites: A 2D Finite Element model to predict the squeeze flow behaviour","year":2015,"lang":"en","type":"article","venue":"Composites Part A Applied Science and Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada; McGill University","keywords":"Peek; Materials science; Composite material; Thermoplastic; Finite element method; Viscosity; Yield (engineering); Composite number; Compression (physics); Flow (mathematics); Structural engineering; Mathematics; Geometry; Polymer","retraction":null,"screen_n_in":null,"score":{"opus":0.02324834943139767,"gpt":0.2326615351810024,"spread":0.2094131857496047,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006392854,0.0002370021,0.0002841692,0.000194643,0.0003952185,0.0001439772,0.0003486185,0.0000530271,0.000003610003],"category_scores_gemma":[0.00001327173,0.0001700743,0.00003751327,0.0002486371,0.000202676,0.0001673226,0.0001912388,0.0002053602,0.000001702121],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007707562,"about_ca_system_score_gemma":0.00005504759,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002729019,"about_ca_topic_score_gemma":0.000006150415,"domain_scores_codex":[0.9982989,0.00001554737,0.0003550714,0.0003276306,0.000596196,0.0004066587],"domain_scores_gemma":[0.9992698,0.00006039615,0.00006362207,0.0002638313,0.0001207343,0.0002215775],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.0001354421,0.00002187149,0.0002725624,0.0000625919,0.00001509584,7.95433e-7,0.003256744,0.9127911,0.08180703,0.00005264225,0.0001722913,0.001411783],"study_design_scores_gemma":[0.0007169443,0.00005716928,0.0001172082,0.00008721289,0.00002606088,0.000003145422,0.0002894517,0.5769807,0.4210181,0.00004698384,0.000493711,0.0001633293],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9611287,0.000231571,0.03580518,0.00006417561,0.0002668018,0.0005416761,0.00001449629,0.0001741515,0.001773227],"genre_scores_gemma":[0.9974793,0.00002726878,0.002204648,0.00007561121,0.00005852655,0.00009184208,0.000006433648,0.00002123006,0.00003511213],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.339211,"threshold_uncertainty_score":0.6935427,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2025335753","doi":"10.3139/217.1643","title":"Three-dimensional Filling and Post-filling Simulation of Polymer Injection Molding","year":2001,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Molding (decorative); Compressibility; Finite element method; Conservation of mass; Energy conservation; Momentum (technical analysis); Mechanical engineering; Polymer; Process (computing); Mechanics; Blow molding; Composite material; Computer science; Structural engineering; Engineering; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01706774486963373,"gpt":0.2477357904211606,"spread":0.2306680455515269,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001263579,0.0001740375,0.0001537038,0.0002825117,0.0001629999,0.00009218101,0.0001040492,0.00009447343,0.000139628],"category_scores_gemma":[0.00003091512,0.0001713943,0.00004728429,0.0001987234,0.00005103485,0.0005867154,0.00003594156,0.0001584972,0.00000452096],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004923934,"about_ca_system_score_gemma":0.0000263469,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001490974,"about_ca_topic_score_gemma":0.00001504727,"domain_scores_codex":[0.99893,0.00000876854,0.0003590508,0.0002079486,0.0003035444,0.0001906632],"domain_scores_gemma":[0.9994875,0.0000538047,0.0001052281,0.00007253919,0.0002330694,0.00004784264],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00006647893,0.00001840012,0.002993337,0.00009344058,0.00005502761,0.000001911429,0.000458856,0.8574326,0.0447093,0.0001022571,0.00001212405,0.09405628],"study_design_scores_gemma":[0.0002558807,0.00003519555,0.0008537068,0.0002524969,0.00001900415,0.00006673757,0.0001021648,0.9266002,0.07118415,0.0002239448,0.0001809286,0.0002256111],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9289068,0.007511931,0.06123657,0.0001245567,0.0008900417,0.00007331483,0.000008530503,0.0002235171,0.001024761],"genre_scores_gemma":[0.9989039,0.00003802383,0.000362643,0.00008504312,0.0003613988,0.00000810491,0.00001487745,0.00004062191,0.0001853607],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.09383067,"threshold_uncertainty_score":0.6989257,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2160022449","doi":"10.1002/pen.21632","title":"Characterization of the microinjection molding process","year":2010,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":40,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University; National Research Council Canada; McGill University","funders":"","keywords":"Plunger; Materials science; Polycarbonate; Injection molding machine; Polyoxymethylene; Molding (decorative); Mechanical engineering; Composite material; Process (computing); Mold; Metering mode; Computer science; Polymer; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.004176174053905247,"gpt":0.1834873674763572,"spread":0.1793111934224519,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001079769,0.00005813187,0.0000485959,0.00007571645,0.0001020282,0.00003596219,0.0001091797,0.00002414813,0.000007257978],"category_scores_gemma":[0.00001876515,0.00004245041,0.00001144849,0.0003509325,0.0000799916,0.0001801166,0.00001533967,0.000109459,4.426806e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000005295072,"about_ca_system_score_gemma":0.00001498025,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006413335,"about_ca_topic_score_gemma":8.955344e-7,"domain_scores_codex":[0.9996242,0.000001270819,0.00008026209,0.00008100938,0.0001009946,0.0001122447],"domain_scores_gemma":[0.9998395,0.000004496097,0.00001541212,0.00008260542,0.00003210221,0.00002581606],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[4.247779e-7,0.000001328216,0.0004977542,0.00004248829,0.000001155596,2.197299e-8,0.0003272397,0.0026993,0.9940706,0.00020515,3.729138e-7,0.002154195],"study_design_scores_gemma":[0.0000235126,0.000003829429,0.005426906,0.00001814497,0.000002132578,0.00001059332,0.00001200396,0.09697065,0.897395,0.000004937697,0.00007662007,0.00005568886],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.998108,0.00007673172,0.0007103381,0.0000184666,0.0008433178,0.00003361668,0.000001126469,0.0000843802,0.0001240145],"genre_scores_gemma":[0.999845,0.000009450135,0.00005511477,0.000005897242,0.00003985062,0.000004522954,1.700444e-7,0.000007757383,0.0000322518],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.09667559,"threshold_uncertainty_score":0.1731077,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4391890455","doi":"10.1039/d3ta06274k","title":"Inverse design of porous materials: a diffusion model approach","year":2024,"lang":"en","type":"article","venue":"Journal of Materials Chemistry A","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":38,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Toronto","funders":"National Supercomputing Center, Korea Institute of Science and Technology Information; Natural Sciences and Engineering Research Council of Canada; National Research Foundation of Korea; National Research Foundation","keywords":"Diffusion; Domain (mathematical analysis); Inverse; Porosity; Porous medium; Computer science; Materials science; Mathematics; Geometry; Composite material; Physics; Thermodynamics; Mathematical analysis","retraction":null,"screen_n_in":null,"score":{"opus":0.02702700064196354,"gpt":0.2184420222673645,"spread":0.1914150216254009,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004080744,0.0001253475,0.0002725233,0.00004573001,0.00002089442,0.00009128528,0.0001255349,0.0001045221,0.0002300673],"category_scores_gemma":[0.00002286844,0.00009624199,0.00004210093,0.00006072509,0.00002379627,0.0001473601,0.00002150566,0.00008870081,0.000003254461],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004124859,"about_ca_system_score_gemma":0.00004922479,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002637016,"about_ca_topic_score_gemma":1.252601e-8,"domain_scores_codex":[0.9991609,0.00001971648,0.0004732807,0.00007505628,0.000154761,0.0001162719],"domain_scores_gemma":[0.9996912,0.00001358201,0.0001034705,0.00008460594,0.00006788949,0.00003926326],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00007816189,0.00001634161,2.683358e-7,0.001925712,0.00004279248,0.00001090996,0.0003238771,0.1342842,0.8621918,0.000006706074,0.001026256,0.00009297398],"study_design_scores_gemma":[0.0001456981,0.00002283214,7.267513e-7,0.0002889139,0.00003456889,0.0002243418,0.00006356576,0.02866296,0.9700994,0.0001912452,0.0001658094,0.00009993205],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.976597,0.0006110408,0.021716,0.00001556192,0.0005669229,0.00004873152,0.00002284015,0.00006154933,0.0003603944],"genre_scores_gemma":[0.9943901,0.0002837628,0.004745056,0.00000606321,0.0002837014,0.000004744833,0.00000284252,0.00003083492,0.0002529006],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1079076,"threshold_uncertainty_score":0.3924634,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2072348623","doi":"10.1002/pen.20707","title":"Preform shape and operating condition optimization for the stretch blow molding process","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":35,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Finite element method; Sequential quadratic programming; Robustness (evolution); Mathematical optimization; Process (computing); Parameterized complexity; Quadratic programming; Blow molding; Computer science; Materials science; Mechanical engineering; Algorithm; Mathematics; Structural engineering; Engineering; Composite material; Mold","retraction":null,"screen_n_in":null,"score":{"opus":0.009213904355402437,"gpt":0.2320898117512723,"spread":0.2228759073958699,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000359518,0.00008782923,0.00006236523,0.00007992039,0.0003209194,0.0001498897,0.00007547496,0.00002774293,0.0000311544],"category_scores_gemma":[0.00003683639,0.00006303734,0.000008451952,0.0002067384,0.00007062303,0.0003173455,0.00001446385,0.00006773427,1.368414e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001714822,"about_ca_system_score_gemma":0.00001074371,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005895112,"about_ca_topic_score_gemma":8.895699e-7,"domain_scores_codex":[0.9994453,9.552032e-7,0.0001065486,0.0001282431,0.0001057129,0.0002133095],"domain_scores_gemma":[0.9997964,0.00004458517,0.00001297242,0.00005274802,0.00004515611,0.00004815241],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000003699338,0.000002945879,0.0001896935,0.0002118013,0.00001059132,2.713489e-7,0.001936062,0.901693,0.01842053,0.0004951346,0.000003562742,0.07703273],"study_design_scores_gemma":[0.00007050393,0.00001694413,0.0002432352,0.00002055854,0.000009420366,0.000009902037,0.0002244753,0.9014403,0.09784237,0.000005311603,0.00002538115,0.00009158233],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9688695,0.001735154,0.028879,0.00003878983,0.0001787891,0.0001147064,0.000002312206,0.0001338334,0.00004788947],"genre_scores_gemma":[0.9986058,0.00005753317,0.001212698,0.00001966331,0.00005789915,0.00002216394,8.543917e-7,0.00001273878,0.00001060326],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.07942183,"threshold_uncertainty_score":0.2570588,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1998903651","doi":"10.1002/pen.11212","title":"Numerical and experimental studies on the ejection of injection‐molded plastic products","year":2000,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":34,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Mold; Molding (decorative); Injector; Deformation (meteorology); Finite element method; Polycarbonate; Stress (linguistics); Composite material; Mechanical engineering; Mechanics; Structural engineering; Engineering; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01703956719522983,"gpt":0.2261825497365703,"spread":0.2091429825413404,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001175339,0.00008249313,0.00008001046,0.00007238804,0.0001396051,0.00003002619,0.00004963073,0.00001468642,0.000009565744],"category_scores_gemma":[0.0000498488,0.00005587931,0.000007799418,0.0002848656,0.0001404966,0.0001043533,0.000009530949,0.00007019657,0.00000167306],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001659703,"about_ca_system_score_gemma":0.000007801565,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000115377,"about_ca_topic_score_gemma":1.206161e-7,"domain_scores_codex":[0.9995416,0.000004485133,0.00009307435,0.0001260663,0.0001162833,0.0001184973],"domain_scores_gemma":[0.9998323,0.00004408407,0.000009145436,0.00006756814,0.00001911102,0.00002776536],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003023755,0.00002792316,0.0002006356,0.000185384,0.00004059103,8.290178e-7,0.006326407,0.6569124,0.3293579,0.001433041,0.00007287242,0.00541186],"study_design_scores_gemma":[0.00006899342,0.0001250052,0.0006288878,0.00005069897,0.000004610474,0.00002379431,0.0002944249,0.1247818,0.8738105,0.000006236578,0.00009817177,0.0001069273],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9954882,0.003679244,0.00006991609,0.00003873484,0.0003844788,0.00004078721,4.610919e-7,0.00008489573,0.000213281],"genre_scores_gemma":[0.999711,0.00007814541,0.00004139564,0.00001003433,0.0000419307,0.00001214401,5.722531e-8,0.000007287434,0.00009795088],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5444526,"threshold_uncertainty_score":0.2278692,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2071884348","doi":"10.1002/pen.20852","title":"Real‐time diagnosis of co‐injection molding using ultrasound","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":32,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada; McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Core (optical fiber); Mold; Molding (decorative); Composite material; Ultrasonic sensor; Compression molding; Flow (mathematics); Transfer molding; Volume (thermodynamics); Ultrasound; Acoustics; Mechanics","retraction":null,"screen_n_in":null,"score":{"opus":0.01239342602266878,"gpt":0.2333673714544833,"spread":0.2209739454318145,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004347652,0.0001044319,0.0001122292,0.0002644318,0.0001237966,0.0000453965,0.00008974948,0.00003937753,0.00001778266],"category_scores_gemma":[0.00003951974,0.0001019738,0.00002083982,0.0004807119,0.00009946458,0.000244916,0.00001328621,0.00007659307,0.000001737616],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004744625,"about_ca_system_score_gemma":0.00001505811,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001238606,"about_ca_topic_score_gemma":7.708306e-7,"domain_scores_codex":[0.9992488,0.000002445929,0.0001666819,0.0001390036,0.0001738254,0.0002692136],"domain_scores_gemma":[0.9997114,0.00006572738,0.00002196913,0.00009082524,0.00003427979,0.00007578974],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002497738,0.000004306226,0.003842331,0.00006571966,0.000007012166,7.775723e-7,0.0004850579,0.1308859,0.8621269,0.0001494224,0.000006381279,0.002423594],"study_design_scores_gemma":[0.00005603562,0.00002550233,0.003016027,0.00005627336,0.000007730183,0.00003806692,0.00005900534,0.1350626,0.8614689,0.000005090895,0.00005557794,0.0001492677],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9927538,0.0008260625,0.005115124,0.000001589946,0.000287751,0.0000349785,0.000001982821,0.0001825912,0.0007961142],"genre_scores_gemma":[0.9986789,0.0001421222,0.001067178,0.00000278656,0.00005555781,0.00000250998,3.264348e-7,0.00001616119,0.00003442332],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.005925129,"threshold_uncertainty_score":0.415837,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1983383585","doi":"10.1002/pen.10120","title":"Three‐dimensional simulation of multi‐material injection molding: Application to gas‐assisted and co‐injection molding","year":2003,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":31,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Molding (decorative); Isothermal process; Finite element method; Work (physics); Mechanical engineering; Flow (mathematics); Mechanics; Transfer molding; Composite material; Newtonian fluid; Core (optical fiber); Polymer; Thermodynamics; Mold; Engineering; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01549444078086643,"gpt":0.2369218474500218,"spread":0.2214274066691554,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002842646,0.0001329468,0.000125117,0.0002866977,0.0001727295,0.00006730436,0.00005324967,0.00005472135,0.000008431536],"category_scores_gemma":[0.00005433561,0.0001323759,0.00001555962,0.0004440453,0.00005740233,0.0002521636,0.00001671142,0.00007340808,0.000001271459],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004627964,"about_ca_system_score_gemma":0.0000148116,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00007994087,"about_ca_topic_score_gemma":0.000004874811,"domain_scores_codex":[0.9991865,0.000006564663,0.0001927501,0.0002311803,0.0001831746,0.0001998866],"domain_scores_gemma":[0.9996933,0.00002676319,0.00003182406,0.00009888404,0.00005969105,0.00008949921],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000006233999,0.000005242187,0.0003429129,0.00004249005,0.000003765501,8.838046e-8,0.0002003806,0.681734,0.3123644,0.0001445594,0.000001468956,0.005154479],"study_design_scores_gemma":[0.0001143095,0.00004726109,0.00199187,0.00003025384,0.000006265894,0.00002050642,0.00002363387,0.7592635,0.2382953,0.0000120498,0.00006360072,0.0001314761],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8957072,0.0003119117,0.1033008,0.000005827751,0.000369598,0.0001152711,0.000003105312,0.0001464944,0.00003978035],"genre_scores_gemma":[0.9983329,0.000007485201,0.001566827,0.00000743955,0.00003693498,0.00002017259,0.000001521259,0.00001747995,0.000009243972],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1026257,"threshold_uncertainty_score":0.5398133,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2027487156","doi":"10.1007/s12247-011-9112-8","title":"Modeling and Optimization of a Tablet Manufacturing Line","year":2011,"lang":"en","type":"article","venue":"Journal of Pharmaceutical Innovation","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":31,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"ProSensus (Canada)","funders":"","keywords":"Tableting; Compaction; Computer science; Process variable; Process engineering; Block (permutation group theory); Process (computing); Engineering; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.09690175198036786,"gpt":0.2983503978307551,"spread":0.2014486458503872,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002558633,0.00005338264,0.00009729082,0.0001916257,0.00002058879,0.0000100443,0.00003582101,0.00003720372,0.00006444614],"category_scores_gemma":[0.00002292731,0.00004472659,0.00001342056,0.0001653322,0.00001366412,0.000250211,0.000008105399,0.0001471634,2.717272e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001450718,"about_ca_system_score_gemma":0.000008300057,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001974448,"about_ca_topic_score_gemma":7.682713e-8,"domain_scores_codex":[0.9994279,0.000007814016,0.000372608,0.00003284046,0.00009302465,0.00006586764],"domain_scores_gemma":[0.9996523,0.000006891148,0.00007002088,0.00002486346,0.0002260321,0.00001994276],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00004879749,0.00001421206,0.0000415334,0.000119117,0.00002640012,9.708059e-7,0.0002721261,0.978964,0.01268093,0.0004003268,0.00001311262,0.007418429],"study_design_scores_gemma":[0.0001970828,0.00004041622,0.00001464934,0.00004082518,0.00001593481,0.00001994239,0.00003228018,0.758495,0.2407414,0.0002583915,0.0001032717,0.00004074673],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.4984533,0.0002448672,0.5007234,0.00002097573,0.0001679145,0.00002416106,5.303357e-7,0.00001432275,0.0003504554],"genre_scores_gemma":[0.9837152,0.0002169707,0.01594143,0.00003710871,0.00007192328,5.788452e-7,5.802956e-7,0.000009139208,0.000007071796],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.4852619,"threshold_uncertainty_score":0.1823897,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2057808611","doi":"10.1002/pen.10988","title":"Metal injection molding: 3D modeling of nonisothermal filling","year":2002,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":29,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Materials science; Mechanics; Rotational symmetry; Inertia; Flow (mathematics); Finite element method; Transfer molding; Diaphragm (acoustics); Free surface; Mold; Composite material; Molding (decorative); Thermodynamics; Classical mechanics; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01815929018792513,"gpt":0.1914164167341494,"spread":0.1732571265462242,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001392362,0.0001000021,0.0001051937,0.0001887853,0.0001038567,0.00004150267,0.00009297105,0.000031757,0.00003277043],"category_scores_gemma":[0.00001545887,0.00009381694,0.0000215022,0.0003303927,0.00005473369,0.000266386,0.00001915873,0.00009115188,0.000002346856],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001690476,"about_ca_system_score_gemma":0.000004893569,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002505856,"about_ca_topic_score_gemma":3.218425e-7,"domain_scores_codex":[0.9993593,0.000002306233,0.0001414374,0.000133212,0.0001532452,0.0002104716],"domain_scores_gemma":[0.9998109,0.000009503039,0.00001326533,0.00008410407,0.00002877493,0.00005345499],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[6.8078e-7,0.000003092974,0.0000380434,0.00004502424,0.000005459744,2.666626e-7,0.0006765918,0.9080217,0.08769292,0.00007274793,0.000002377667,0.00344109],"study_design_scores_gemma":[0.0000503199,0.00001924552,0.0000158707,0.00002875872,0.000005453011,0.000016603,0.00004292373,0.9140889,0.0855783,0.00000220509,0.00004237136,0.0001090571],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9610327,0.004853246,0.03216851,0.000006452884,0.0003868386,0.0000311276,0.000001308129,0.0002106053,0.001309205],"genre_scores_gemma":[0.9988896,0.0001086371,0.0008623796,0.000005047037,0.00004448576,0.000004302448,1.213256e-7,0.00001552963,0.000069913],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03785688,"threshold_uncertainty_score":0.3825744,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4285004692","doi":"10.1002/cjce.24538","title":"Experimental methods in chemical engineering: Reactive extrusion","year":2022,"lang":"en","type":"article","venue":"The Canadian Journal of Chemical Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":true,"about_ca":false},"ca_institutions":"University of British Columbia; Polytechnique Montréal","funders":"","keywords":"Polypropylene; Materials science; Reactive extrusion; Extrusion; Compatibilization; Residence time (fluid dynamics); Residence time distribution; Polymer; Mixing (physics); Chemical engineering; Maleic anhydride; Depolymerization; Process engineering; Compounding; Rheology; Composite number; Composite material; Mechanical engineering; Copolymer; Polymer chemistry; Polymer blend; Chemistry; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01568770321924074,"gpt":0.2392817488652597,"spread":0.223594045646019,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004316626,0.0001551046,0.0002101544,0.0002393699,0.00006639568,0.00003776834,0.0003159903,0.00006045482,0.0001376346],"category_scores_gemma":[0.00009736924,0.0001369383,0.00008636836,0.0003067726,0.00002384672,0.0001045874,0.00003594337,0.0008871973,0.000001128879],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0007770956,"about_ca_system_score_gemma":0.0001161989,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0002700607,"about_ca_topic_score_gemma":0.000004550269,"domain_scores_codex":[0.9990748,0.00002077605,0.0003222269,0.00008762888,0.0001783016,0.0003162829],"domain_scores_gemma":[0.9995313,0.00007663944,0.00004164061,0.0001100874,0.00003138138,0.0002089357],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000008842204,0.000004640477,0.000009275357,0.00001517499,0.00001860437,0.00002272248,0.0008288337,0.3673836,0.630937,0.0001315281,0.0001111863,0.0005285655],"study_design_scores_gemma":[0.0002384654,0.00002812971,0.00001433886,0.00003805069,0.000008860849,0.0003470728,0.00009983727,0.1056156,0.8866886,0.00003280931,0.006692744,0.0001954782],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9933189,0.002948879,0.00215788,0.0001531822,0.0009970369,0.00008804411,0.000004536164,0.00005864202,0.0002729355],"genre_scores_gemma":[0.9956944,0.00000140974,0.004039643,0.00003109026,0.000157892,0.0000186743,0.000001236659,0.00004364346,0.00001199953],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.261768,"threshold_uncertainty_score":0.558418,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W134995871","doi":"10.1007/s10853-015-8853-z","title":"Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy","year":2015,"lang":"en","type":"article","venue":"Journal of Materials Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"","keywords":"Materials science; Rheology; Rheometry; Differential scanning calorimetry; Thixotropy; Shear thinning; Composite material; Viscosity; Wax; Mixing (physics); Extrusion; Molding (decorative); Shear rate; Transesterification; Paraffin wax; Organic chemistry; Methanol; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.024179984615621,"gpt":0.2656318054131379,"spread":0.2414518207975169,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001033547,0.00009152289,0.0002474811,0.0002558631,0.00004127226,0.00005280441,0.000228859,0.00004781642,0.00005201633],"category_scores_gemma":[0.0001205834,0.00006340834,0.00005440936,0.0002458514,0.0001303647,0.0005134219,0.00002590074,0.00008015961,0.000002299054],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008480298,"about_ca_system_score_gemma":0.0001935521,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000117599,"about_ca_topic_score_gemma":0.000001269544,"domain_scores_codex":[0.9989729,0.00003354757,0.0003783899,0.00007200401,0.0004034297,0.0001397194],"domain_scores_gemma":[0.9991851,0.00001230207,0.0001987548,0.0001023654,0.0004208673,0.0000806242],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001700406,0.00002773931,0.0007157967,0.00007159657,0.00002152231,8.793793e-7,0.0005973181,0.1847267,0.8134145,0.00001781487,0.0001841903,0.00005184488],"study_design_scores_gemma":[0.0003674497,0.0008909467,0.00859532,0.0001510313,0.00001357893,0.00004515288,0.0001626983,0.0007043459,0.9888682,0.0001049854,0.00001267521,0.00008364524],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9984481,0.0000720445,0.0001324589,0.00001365942,0.001085453,0.00004300194,0.000007691912,0.00001287854,0.0001847162],"genre_scores_gemma":[0.9997196,0.00001891608,0.0001533798,0.000006874115,0.00007570212,4.764439e-7,1.653758e-7,0.000008199365,0.00001670622],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1840224,"threshold_uncertainty_score":0.2585717,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2020176286","doi":"10.1002/pen.20720","title":"An investigation on the application of predictive control for controlling screw position and velocity on an injection molding machine","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":27,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of New Brunswick","funders":"","keywords":"Setpoint; Controller (irrigation); Control theory (sociology); Model predictive control; Open-loop controller; Injection molding machine; Position (finance); Materials science; Molding (decorative); Tracking (education); Computer science; Mold; Control engineering; Engineering; Closed loop; Control (management); Artificial intelligence; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.01003808541435,"gpt":0.220320462291131,"spread":0.210282376876781,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007400351,0.0000879598,0.00008230429,0.0001387757,0.0002070506,0.00004709972,0.00006043537,0.00003555996,4.055004e-7],"category_scores_gemma":[0.00003218981,0.00006807841,0.00001047219,0.0001744989,0.00008073779,0.0002427675,0.000003512803,0.00008275192,9.511764e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003066691,"about_ca_system_score_gemma":0.000008400351,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004121436,"about_ca_topic_score_gemma":0.000002562264,"domain_scores_codex":[0.9994515,0.000008188392,0.0001248534,0.0001526849,0.000125193,0.0001376356],"domain_scores_gemma":[0.9996801,0.00008861361,0.0000313291,0.00008546308,0.00005248433,0.00006203565],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00008851915,0.00001058316,0.0004758172,0.0000481249,0.000008829461,5.941897e-8,0.0009155439,0.5393065,0.4351387,0.007913895,5.434007e-7,0.0160929],"study_design_scores_gemma":[0.0001637504,0.0002578984,0.003215148,0.00002667846,0.000007294895,0.000002422545,0.00005204978,0.7699093,0.2262177,0.00008169086,0.000002978616,0.00006306351],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.6759392,0.0001779305,0.3235349,0.00002779525,0.00007145511,0.0001485254,0.000006194098,0.00007270063,0.00002130205],"genre_scores_gemma":[0.9994878,0.000008560201,0.0003510529,0.0000506982,0.00005926712,0.00002852879,0.000002464488,0.00001027975,0.000001315359],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3235486,"threshold_uncertainty_score":0.2776157,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2474049929","doi":"10.1002/pen.24352","title":"Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites","year":2016,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":25,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; Western University","funders":"","keywords":"Materials science; Masterbatch; Composite material; Electrical resistivity and conductivity; Polystyrene; Percolation threshold; Nanocomposite; Microstructure; Carbon nanotube; Shearing (physics); Molding (decorative); Anisotropy; Carbon black; Polymer","retraction":null,"screen_n_in":null,"score":{"opus":0.009175813930318438,"gpt":0.1819807026731992,"spread":0.1728048887428808,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001343802,0.0001306776,0.000152335,0.0001838241,0.00007876066,0.00003647602,0.00009093535,0.0000509905,0.000002296458],"category_scores_gemma":[0.00003906983,0.00008121099,0.00001841659,0.0002526173,0.0002017114,0.0001382975,0.00003559993,0.00006226058,4.884919e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002369466,"about_ca_system_score_gemma":0.00001538849,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00005589643,"about_ca_topic_score_gemma":7.691814e-7,"domain_scores_codex":[0.9992609,0.00000716021,0.0001551346,0.0001965369,0.0001356599,0.0002446043],"domain_scores_gemma":[0.9997669,0.00002303461,0.00001693335,0.00008540429,0.00003639493,0.00007134596],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000009910565,0.000005592097,0.0007284278,0.00004190049,0.000007017162,7.528878e-7,0.0001972159,0.0004408293,0.9945753,0.00009602121,0.000001389144,0.003895688],"study_design_scores_gemma":[0.0001649185,0.00006226876,0.001594166,0.00008129986,0.000006631933,0.00006502489,0.00001124428,0.03882283,0.9590176,0.000003950097,0.00002680624,0.0001432472],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.991704,0.00739099,0.0004219639,0.00004068736,0.0001504537,0.00005843369,0.000001038514,0.0001646993,0.00006774185],"genre_scores_gemma":[0.999314,0.0002802245,0.0002681225,0.000005565731,0.00002790982,0.00001135376,7.19135e-8,0.00001220059,0.00008055061],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.038382,"threshold_uncertainty_score":0.3311688,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2007728975","doi":"10.1208/pt0801023","title":"Application of thermal effusivity as a process analytical technology tool for monitoring and control of the roller compaction process","year":2007,"lang":"en","type":"article","venue":"AAPS PharmSciTech","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":25,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Women's Health Research Institute","funders":"","keywords":"Thermal effusivity; Compaction; Process (computing); Process engineering; Process analytical technology; Thermal; Computer science; Materials science; Work in process; Engineering; Composite material; Thermodynamics; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.00948062138999798,"gpt":0.2816223325364081,"spread":0.2721417111464101,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002933423,0.00009518407,0.0001636343,0.0001088178,0.00007225948,0.000008989844,0.0001156858,0.00009794741,0.0000030994],"category_scores_gemma":[0.00005265396,0.00006913103,0.00003507281,0.0003495344,0.00007962593,0.00009250178,0.00001042758,0.0001258879,4.18874e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002138694,"about_ca_system_score_gemma":0.00001559803,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000008767222,"about_ca_topic_score_gemma":7.296603e-7,"domain_scores_codex":[0.9993639,0.000006047687,0.0002359857,0.0001171084,0.0001277204,0.0001492391],"domain_scores_gemma":[0.9995519,0.00005130932,0.00008290268,0.0001123619,0.000182624,0.00001893523],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0005189896,0.0001163861,0.1359063,0.002378263,0.0001636456,3.328913e-7,0.0010378,0.04610464,0.7481354,0.0008673933,0.000006347491,0.06476454],"study_design_scores_gemma":[0.0007207548,0.0000635876,0.006516723,0.0000594158,0.00004326087,0.000007254245,0.0001797923,0.05203005,0.939386,0.0007041956,0.0001837851,0.0001051442],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9374334,0.000174091,0.06156684,0.00006619966,0.00009679834,0.0004429449,0.000004294503,0.00008758531,0.0001278638],"genre_scores_gemma":[0.9997121,0.000007160711,0.00009931705,0.000006782839,0.00006203493,0.00007925224,4.490338e-7,0.0000152928,0.00001757562],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1912507,"threshold_uncertainty_score":0.2819082,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1978138831","doi":"10.1002/pen.20258","title":"Temperature control of injection molding. Part I: Modeling and identification","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of New Brunswick","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Molding (decorative); Barrel (horology); Injection molding machine; Materials science; Series (stratigraphy); Temperature control; System identification; Mechanical engineering; Control theory (sociology); Control (management); Computer science; Composite material; Engineering; Data modeling; Geology; Artificial intelligence","retraction":null,"screen_n_in":null,"score":{"opus":0.006951219011427346,"gpt":0.188560755315465,"spread":0.1816095363040377,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001619473,0.00007336278,0.0000774371,0.000127391,0.00009292293,0.00006122435,0.00004924467,0.00003208732,0.000001011783],"category_scores_gemma":[0.00001939833,0.00006772637,0.000009759277,0.0002209264,0.00005341875,0.000240265,0.000008911516,0.00007339865,3.621546e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001718168,"about_ca_system_score_gemma":0.00001344566,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002682041,"about_ca_topic_score_gemma":6.272861e-7,"domain_scores_codex":[0.999527,0.000001688291,0.0001214166,0.0001209347,0.000105,0.000123921],"domain_scores_gemma":[0.9998361,0.000005458089,0.00001259519,0.00006583257,0.00003608341,0.00004387079],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000001310244,0.000001610097,0.0000474083,0.00004465438,0.000002956995,9.860216e-8,0.0002768983,0.7044734,0.293569,0.0005773203,5.185478e-7,0.001004769],"study_design_scores_gemma":[0.0001692219,0.00002163321,0.0002598744,0.00006454051,0.00000748434,0.00001979702,0.00006075708,0.7138292,0.2853766,0.00006638022,0.00001256422,0.0001118801],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9719048,0.003677497,0.02391573,0.00002498591,0.0002862423,0.00003802689,0.000001913591,0.0001082783,0.00004249151],"genre_scores_gemma":[0.9996658,0.0001288045,0.0001363749,0.000006891907,0.000034655,0.000006268309,2.885436e-7,0.00000820753,0.00001270859],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.02776096,"threshold_uncertainty_score":0.2761801,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2568870496","doi":"10.1007/s00170-016-9889-1","title":"Low-pressure powder injection molding using an innovative injection press concept","year":2017,"lang":"en","type":"article","venue":"The International Journal of Advanced Manufacturing Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada; École de technologie supérieure","keywords":"Materials science; Raw material; Wax; Paraffin wax; Injection molding machine; Viscosity; Molding (decorative); Thermogravimetric analysis; Mold; Stearic acid; Rheology; Composite material; Process (computing); Waste management; Chemical engineering; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01970216845779997,"gpt":0.2769310203039309,"spread":0.2572288518461309,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000203879,0.0001626982,0.0001850977,0.0003194604,0.0003503617,0.0001909054,0.001039206,0.0001381039,0.00002495742],"category_scores_gemma":[0.0001215053,0.000124819,0.0000479322,0.00006308527,0.0001525931,0.001101332,0.0001464654,0.0005684235,0.000001134169],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001393986,"about_ca_system_score_gemma":0.00002690591,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004644539,"about_ca_topic_score_gemma":0.000009980989,"domain_scores_codex":[0.9990392,0.00001805716,0.0003594103,0.0001311906,0.0002718063,0.0001802749],"domain_scores_gemma":[0.9987152,0.00002294162,0.0004638373,0.0002903588,0.0004808938,0.00002679291],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00009981459,0.00002414708,0.00007726379,0.00001689171,0.0002274474,0.00001276468,0.0005973093,0.9024864,0.04939631,0.0005187897,0.00004778516,0.04649502],"study_design_scores_gemma":[0.0004973886,0.0001746508,0.0003958979,0.0001498359,0.00002520245,0.0006287386,0.0006225313,0.00734529,0.9834381,0.003370082,0.00317601,0.0001762936],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9866149,0.000343723,0.009056199,0.0003007188,0.003137139,0.0000878078,0.000004782391,0.0001641398,0.000290565],"genre_scores_gemma":[0.9979289,0.0001012351,0.001430734,0.00003670798,0.0004063162,0.000004807986,0.000001007633,0.00002966687,0.00006066992],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.9340417,"threshold_uncertainty_score":0.5089972,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3217149774","doi":"10.1016/j.mechmat.2021.104175","title":"Predicting the multiaxial stress-strain behavior of polyethylene terephthalate (PET) at different strain rates and temperatures above Tg by using an Artificial Neural Network","year":2021,"lang":"en","type":"article","venue":"Mechanics of Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":24,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"China Scholarship Council; Queen's University","keywords":"Materials science; Polyethylene terephthalate; Stress (linguistics); Composite material; Artificial neural network; Deformation (meteorology); Strain rate; Strain (injury); Backpropagation; Work (physics); Constant (computer programming); Stress–strain curve; Plane stress; Structural engineering; Finite element method; Mechanical engineering; Artificial intelligence; Computer science","retraction":null,"screen_n_in":null,"score":{"opus":0.02375439054326724,"gpt":0.2466929369003205,"spread":0.2229385463570532,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002707999,0.0002010099,0.0003224657,0.0000267677,0.0001648854,0.0001091676,0.0001103766,0.00008682127,0.0001139025],"category_scores_gemma":[0.00002658345,0.0001508982,0.00004080122,0.00006169814,0.00003283079,0.0001041202,0.00008840393,0.0001004644,1.775529e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002069599,"about_ca_system_score_gemma":0.00001198977,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00006266586,"about_ca_topic_score_gemma":0.00005282075,"domain_scores_codex":[0.9987943,0.0001261955,0.000456008,0.0001956752,0.0001631447,0.0002646846],"domain_scores_gemma":[0.9995326,0.00003949232,0.0001335425,0.0001781106,0.00007188645,0.00004435273],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004613643,0.00003586077,0.0002754941,0.0001778578,0.0000358394,0.000006410543,0.0004928127,0.01252928,0.9859688,0.00008592792,0.000008560502,0.0003370014],"study_design_scores_gemma":[0.0001582567,0.00007969569,0.0004113108,0.00009864294,0.00005723682,0.00003500941,0.0003911349,0.01396841,0.9845024,0.0001434908,0.000004461598,0.000149988],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9963469,0.0006070618,0.0001266197,0.00001402141,0.0008007548,0.0001739999,0.001876022,0.00005241485,0.000002196033],"genre_scores_gemma":[0.9993221,0.00005737046,0.0002015499,0.00001015851,0.0002308359,0.00001462775,0.0001074272,0.00003955091,0.00001633801],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.002975232,"threshold_uncertainty_score":0.6153449,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2969914493","doi":"10.1007/s11665-019-04276-9","title":"Effect of Powder Shape and Size on Rheological, Thermal, and Segregation Properties of Low-Pressure Powder Injection Molding Feedstocks","year":2019,"lang":"en","type":"article","venue":"Journal of Materials Engineering and Performance","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"Mitacs","keywords":"Materials science; Raw material; Viscosity; Rheology; Thermogravimetric analysis; Particle size; Molding (decorative); Composite material; Rheometer; Viscometer; Volume (thermodynamics); Volume fraction; Differential scanning calorimetry; Chemical engineering; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.005490866233555554,"gpt":0.1809083615659285,"spread":0.175417495332373,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003885008,0.0001345261,0.0003033166,0.00008034125,0.00003030199,0.00003320785,0.00004201122,0.00008466947,0.00003173043],"category_scores_gemma":[0.00003817559,0.00009018833,0.00001993447,0.00004838915,0.00002629173,0.0002298606,0.00001750857,0.0001120441,3.919447e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000007543203,"about_ca_system_score_gemma":0.000004846231,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003847357,"about_ca_topic_score_gemma":4.213489e-8,"domain_scores_codex":[0.9994065,0.00002358873,0.0002910937,0.00007063529,0.0001079101,0.000100281],"domain_scores_gemma":[0.9996971,0.00005108538,0.0001163598,0.00005357393,0.00005419645,0.00002763656],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000333402,0.000005615762,0.001661436,0.00427925,0.0000480343,3.00805e-7,0.0004045143,0.1392217,0.8520539,0.0000102252,0.000004244345,0.001977402],"study_design_scores_gemma":[0.0004757201,0.001359314,0.008610063,0.001048758,0.0000330049,0.00006706166,0.00002752554,0.03119245,0.957031,0.000001535618,0.00003118626,0.0001224514],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9977001,0.001770168,0.000007282163,0.000008030534,0.0003699286,0.00009737053,0.000002049316,0.00002208477,0.00002296624],"genre_scores_gemma":[0.9992735,0.000570788,0.00004761678,0.0000047914,0.00005736198,0.000002873798,2.130367e-7,0.00001636247,0.00002648701],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1080292,"threshold_uncertainty_score":0.3677773,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2789999280","doi":"10.1002/pat.4282","title":"Microinjection molding of multiwalled carbon nanotubes (<scp>CNT</scp>)–filled polycarbonate nanocomposites and comparison with electrical and morphological properties of various other <scp>CNT</scp>‐filled thermoplastic micromoldings","year":2018,"lang":"en","type":"article","venue":"Polymers for Advanced Technologies","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Masterbatch; Composite material; Nanocomposite; Polycarbonate; Carbon nanotube; Molding (decorative); Thermoplastic; Polymer; Polybutylene terephthalate; Polyester","retraction":null,"screen_n_in":null,"score":{"opus":0.009571834548363063,"gpt":0.2077023152406611,"spread":0.198130480692298,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0001535723,0.0005158305,0.0008515757,0.0005032236,0.0002365599,0.00005440111,0.0002800758,0.0003833144,0.000001685076],"category_scores_gemma":[0.0004230909,0.0003839064,0.00009239831,0.0005055247,0.0009285897,0.0001805729,0.000129273,0.0003255496,4.492721e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006707007,"about_ca_system_score_gemma":0.00002706692,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001288606,"about_ca_topic_score_gemma":0.00002545689,"domain_scores_codex":[0.9979814,0.00003627613,0.0005903011,0.0005425396,0.0002166872,0.00063278],"domain_scores_gemma":[0.9988354,0.0003559738,0.0002848743,0.0002780392,0.000189001,0.00005674722],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001872762,0.00007234768,0.002849938,0.0003484663,0.0002248841,0.000002322181,0.00133641,0.0008087902,0.9874263,0.0001105181,0.00001558135,0.006617182],"study_design_scores_gemma":[0.00165796,0.001479474,0.0002857684,0.0002922977,0.0001125712,0.0000981541,0.002248945,0.01546385,0.9777291,0.0001827951,0.0002738799,0.0001752283],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9788905,0.01776516,0.001148783,0.00002549194,0.000169108,0.0007568492,0.00001726619,0.001023888,0.0002029199],"genre_scores_gemma":[0.992461,0.0005680316,0.006539047,0.00001213789,0.00002661278,0.0001827289,0.00000304003,0.00009793959,0.0001094091],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01719713,"threshold_uncertainty_score":0.9998613,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3127739352","doi":"10.3390/met11020264","title":"Effect of Thermal Debinding Conditions on the Sintered Density of Low-Pressure Powder Injection Molded Iron Parts","year":2021,"lang":"en","type":"article","venue":"Metals","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Rio Tinto (Canada); École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Sintering; Materials science; Metal injection molding; Raw material; Mold; Molding (decorative); Ceramic; Viscosity; Composite material; Iron powder; Metal powder; Metal; Injection moulding; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.01289972323803237,"gpt":0.231802344616007,"spread":0.2189026213779746,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000251462,0.00009664157,0.0001862915,0.00004477615,0.00006856152,0.0000161124,0.00005831945,0.00005457031,0.0002593444],"category_scores_gemma":[0.00009237627,0.00006434781,0.0000877553,0.0001162251,0.0000326702,0.00006701663,0.00001825686,0.0001039276,0.000009504841],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001170578,"about_ca_system_score_gemma":0.000007538577,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000131838,"about_ca_topic_score_gemma":0.000005811048,"domain_scores_codex":[0.9993925,0.0001366583,0.0001658089,0.00009078864,0.0001151277,0.00009907942],"domain_scores_gemma":[0.9995705,0.0001442821,0.00004770715,0.0001600733,0.000062071,0.00001532306],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006030435,0.00003240678,0.0006585149,0.0006240319,0.0002394083,0.000002303281,0.0007722066,0.2281892,0.7675782,0.0004211039,0.0004579006,0.0009643504],"study_design_scores_gemma":[0.0001456959,0.0001029153,0.001011196,0.0001052615,0.00007548113,0.000006243426,0.00006398545,0.002945014,0.9952953,0.00002782642,0.0001539919,0.00006705654],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9976168,0.0003219307,0.0001550033,0.00003831898,0.0002809877,0.0001040426,0.00001176853,0.00004938669,0.001421798],"genre_scores_gemma":[0.9996053,0.000007936606,0.00001362582,0.00002257363,0.00003256924,0.0000147385,0.000005803789,0.00001459406,0.0002828896],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2277171,"threshold_uncertainty_score":0.283964,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2607449659","doi":"10.1016/j.powtec.2017.04.051","title":"Design of trimodal Fe micro-nanopowder feedstock for micro powder injection molding","year":2017,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Raw material; Materials science; Extrusion; Homogeneity (statistics); Agglomerate; Composite material; Rheometer; Particle size; Particle-size distribution; Plastics extrusion; Rheology; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.02671147327221964,"gpt":0.2519808278670164,"spread":0.2252693545947968,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002020708,0.0002439462,0.000345237,0.0004445428,0.0004335722,0.00007409539,0.0004659357,0.0004347574,0.0000416257],"category_scores_gemma":[0.0001218711,0.0002385826,0.00008680243,0.0001574524,0.0001870158,0.0002181929,0.00008231614,0.0002518725,0.00001651573],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007644887,"about_ca_system_score_gemma":0.00003902649,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004468704,"about_ca_topic_score_gemma":0.000005489901,"domain_scores_codex":[0.9988484,0.00001409626,0.0003413574,0.0002849685,0.00009480184,0.000416356],"domain_scores_gemma":[0.9990702,0.00003928424,0.0001590373,0.0005310166,0.0001659413,0.00003451044],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00009914713,0.0000425717,0.001156366,0.0002702471,0.0001510356,0.000001896206,0.0003208849,0.007422951,0.9677694,0.0008010893,0.002884087,0.01908028],"study_design_scores_gemma":[0.0008495194,0.0002588551,0.0002351263,0.00007222881,0.00004585606,0.00006052611,0.0001786236,0.004390628,0.9844611,0.003456374,0.005635059,0.0003560876],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8545132,0.00259425,0.1369262,0.0009132774,0.002116556,0.000955152,0.00002044777,0.0012156,0.0007453972],"genre_scores_gemma":[0.9881837,0.00009121827,0.01084028,0.00003471423,0.00009300671,0.0001628482,0.000003033665,0.00007530081,0.0005159034],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1336705,"threshold_uncertainty_score":0.9729117,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2461992771","doi":"10.1177/0021998316650273","title":"An experimental technique to characterize interply void formation in unidirectional prepregs","year":2016,"lang":"en","type":"article","venue":"Journal of Composite Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Technische Universität München; University of Bristol; McGill University; Deutsche Forschungsgemeinschaft; Engineering and Physical Sciences Research Council; University of Southern California","keywords":"Materials science; Composite material; Void (composites); Vaporization; Contact angle; Moisture; Autoclave; Groove (engineering); Enhanced Data Rates for GSM Evolution; Contact region; Contact area; Layer (electronics)","retraction":null,"screen_n_in":null,"score":{"opus":0.01295255816011886,"gpt":0.2451092769227345,"spread":0.2321567187626156,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002570755,0.00008722665,0.0001655966,0.0002031699,0.00002466014,0.00007098353,0.0001104919,0.00004276264,0.0001343882],"category_scores_gemma":[0.000006327024,0.00005985081,0.00002507774,0.00005833365,0.000008691967,0.0008127452,0.00001480542,0.00004227622,0.00001075999],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001177697,"about_ca_system_score_gemma":0.000007120199,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006144264,"about_ca_topic_score_gemma":0.000001174247,"domain_scores_codex":[0.999293,0.00004928397,0.000398128,0.00005383786,0.000106162,0.00009958394],"domain_scores_gemma":[0.9997194,0.00001078289,0.00008902856,0.00006724408,0.0000655795,0.00004800107],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001899802,0.00002729087,0.00004376945,0.00002001717,0.000006719641,0.000003321349,0.0004756112,0.0004693356,0.9977228,0.0000166092,0.00008005828,0.0009444928],"study_design_scores_gemma":[0.0002112108,0.0002202171,0.001090774,0.0002899839,0.000002262801,0.0001585605,0.00003297586,0.00002735947,0.9962253,0.00004632922,0.001605502,0.00008952627],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9857161,0.00005003131,0.01336909,0.00007974407,0.0005288954,0.0001094403,0.000009221252,0.00004683912,0.00009064814],"genre_scores_gemma":[0.998446,0.00002247709,0.001260574,0.00003825066,0.0001750624,0.00002210622,0.000001302055,0.00001488755,0.00001929126],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01272995,"threshold_uncertainty_score":0.2440645,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2013638824","doi":"10.1002/pen.10119","title":"Optimization of blow molded part performance through process simulation","year":2003,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":22,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Deflection (physics); Finite element method; Constraint (computer-aided design); Process (computing); Mathematical optimization; Stability (learning theory); Work (physics); Materials science; Optimization problem; Computer science; Structural engineering; Mechanical engineering; Mathematics; Engineering; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01309122936059975,"gpt":0.2170546859759942,"spread":0.2039634566153944,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001198337,0.00007658577,0.00007416848,0.00007000967,0.00007736429,0.00002730371,0.00005894827,0.00002466236,0.00001902386],"category_scores_gemma":[0.00003164323,0.00007032434,0.000009121966,0.0003675362,0.0000544846,0.0003691645,0.000005016425,0.00004827099,4.782125e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001031168,"about_ca_system_score_gemma":0.00001746575,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001719863,"about_ca_topic_score_gemma":4.840138e-8,"domain_scores_codex":[0.9994988,0.000002442583,0.0001152671,0.000104055,0.000132862,0.0001466094],"domain_scores_gemma":[0.9998236,0.0000112006,0.00001628681,0.00007082899,0.00004840321,0.00002968876],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[9.824367e-7,0.000002663457,0.0002326247,0.00009953691,0.000002098412,5.026469e-8,0.0004738567,0.9955661,0.002753233,0.0002015181,7.672631e-7,0.0006665751],"study_design_scores_gemma":[0.00005279423,0.00001329157,0.00007364929,0.00003130256,0.000002839768,0.000002268541,0.0000233744,0.7847565,0.2148381,0.00000440181,0.0001254251,0.00007600032],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9302483,0.001106851,0.06695871,0.00000386379,0.0002847123,0.00004717665,7.785347e-7,0.0001346528,0.00121492],"genre_scores_gemma":[0.9984927,0.0001131029,0.001320712,0.000005064575,0.00001500514,0.000006152156,3.403767e-7,0.000009746175,0.00003713438],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2120849,"threshold_uncertainty_score":0.2867743,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2006778707","doi":"10.3139/217.2264","title":"Micro Replication by Injection-Compression Molding","year":2009,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":22,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; National Research Council Canada","funders":"","keywords":"Materials science; Microstructure; Replication (statistics); Molding (decorative); Compression molding; Composite material; Polymer; Mold","retraction":null,"screen_n_in":null,"score":{"opus":0.009237141157810285,"gpt":0.243575436910404,"spread":0.2343382957525937,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00008924544,0.0001430074,0.00009601744,0.0001325776,0.0001626159,0.0001765046,0.0001984533,0.00007629771,0.0001022534],"category_scores_gemma":[0.00001670015,0.0001388259,0.00003785083,0.0001564462,0.00001905981,0.0005075159,0.00001372281,0.0001561497,0.00002225108],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008359667,"about_ca_system_score_gemma":0.00001491893,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001575021,"about_ca_topic_score_gemma":4.531808e-7,"domain_scores_codex":[0.999125,0.0000085878,0.0002434009,0.0002396559,0.0002108803,0.0001724771],"domain_scores_gemma":[0.9996539,0.000009207288,0.00006048857,0.000139813,0.00009221421,0.00004434284],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002575229,0.00003899031,0.000311715,0.00003930518,0.00002298474,0.000001078993,0.000480289,0.01264357,0.5260559,0.0001550563,0.007961375,0.452264],"study_design_scores_gemma":[0.0002762797,0.00004084362,0.0004616418,0.0001879219,0.00001006378,0.00005810562,0.00008473962,0.06280175,0.9164727,0.0006391616,0.01862899,0.0003377627],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8013082,0.02395781,0.09852171,0.003028977,0.003203782,0.0003063395,0.00003156841,0.002800828,0.06684078],"genre_scores_gemma":[0.9973994,0.0000616346,0.0003917704,0.0003760372,0.0002738032,0.00001415265,0.00002990391,0.00002423557,0.001429064],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4519262,"threshold_uncertainty_score":0.5661154,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2943663204","doi":"10.1115/1.4043680","title":"Design of Conformal Porous Structures for the Cooling System of an Injection Mold Fabricated by Additive Manufacturing Process","year":2019,"lang":"en","type":"article","venue":"Journal of Mechanical Design","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Mold; Conformal map; Molding (decorative); Materials science; Porosity; Pressure drop; Water cooling; Mechanical engineering; Composite material; Mechanics; Engineering; Geometry","retraction":null,"screen_n_in":null,"score":{"opus":0.01885152493816628,"gpt":0.2285442000900862,"spread":0.2096926751519199,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000774344,0.0001386989,0.000336877,0.00009530175,0.00006110031,0.00002704634,0.0002274474,0.0001194951,0.00002003297],"category_scores_gemma":[0.00005026283,0.00008950011,0.00007420342,0.00009161245,0.00001781556,0.0002734574,0.000009076155,0.0002276447,5.673013e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000543969,"about_ca_system_score_gemma":0.00005085218,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009932465,"about_ca_topic_score_gemma":1.894935e-7,"domain_scores_codex":[0.9988186,0.00007390016,0.0005875614,0.00008544047,0.000268001,0.0001665178],"domain_scores_gemma":[0.9988402,0.000280134,0.0004127845,0.00009900648,0.0003192385,0.00004869607],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.001009727,0.00001811865,8.351127e-7,0.0004844907,0.0001701604,0.000001153284,0.000412798,0.92937,0.06221575,0.0001905579,0.0001136141,0.00601282],"study_design_scores_gemma":[0.0004564062,0.0009408904,0.000007995971,0.0001384131,0.00006138888,0.0001036373,0.0007884232,0.2873545,0.7097638,0.0002760559,0.00001897369,0.00008955914],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.1452748,0.0003204585,0.8535003,0.000004491131,0.0004228113,0.0004153506,0.00001272465,0.00003480776,0.00001425885],"genre_scores_gemma":[0.9964421,0.0000322435,0.003390159,0.000009914073,0.0000748926,0.00001092767,0.000001499303,0.00002676376,0.00001153025],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.8511673,"threshold_uncertainty_score":0.3649709,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2091818944","doi":"10.1002/pen.22143","title":"Morphology development in the gate region of microinjection‐molded thermoplastics","year":2011,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University; National Research Council Canada; McGill University; Micromolding Solutions (Canada)","funders":"","keywords":"Polyoxymethylene; Materials science; Polarized light microscopy; Differential scanning calorimetry; Composite material; Molding (decorative); Microinjection; Optical microscope; Scanning electron microscope; Morphology (biology); Polyethylene; Shear (geology); Polymer; Optics","retraction":null,"screen_n_in":null,"score":{"opus":0.02388762957434593,"gpt":0.188589707051963,"spread":0.164702077477617,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000174538,0.0000645026,0.00006287751,0.0001305205,0.00005025402,0.00001181852,0.0001212771,0.000021918,0.000003461237],"category_scores_gemma":[0.00001204231,0.00004606209,0.000007636733,0.0002777946,0.00008201237,0.00006765049,0.0000145313,0.00007178366,0.000001084533],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001153666,"about_ca_system_score_gemma":0.00001671015,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003229639,"about_ca_topic_score_gemma":0.000002146489,"domain_scores_codex":[0.9995828,0.000004305271,0.0001103386,0.00008324868,0.00007522664,0.0001441062],"domain_scores_gemma":[0.9998654,0.00001404012,0.00001202005,0.00007348802,0.00001596563,0.00001913121],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004174308,0.00008650279,0.009889283,0.000491889,0.00004044472,0.00003855956,0.08613376,0.09660818,0.7724854,0.007468898,0.00007828169,0.02663705],"study_design_scores_gemma":[0.0001711613,0.00005304267,0.02387351,0.00007161335,0.000006199212,0.0002248135,0.0003484432,0.04847228,0.9261663,0.00004737495,0.0003360937,0.0002292034],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9930828,0.0007299395,0.005303068,0.000007082379,0.0002131427,0.00003158205,1.923137e-7,0.00004377165,0.0005883956],"genre_scores_gemma":[0.9992794,0.00003764543,0.0006267447,0.00001042058,0.000009333776,0.000006761648,8.896689e-8,0.000005805407,0.00002375788],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1536809,"threshold_uncertainty_score":0.1878358,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2046576569","doi":"10.1179/174328905x71977","title":"Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding","year":2005,"lang":"en","type":"article","venue":"Plastics Rubber and Composites Macromolecular Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada","funders":"","keywords":"Ultrasonic sensor; Materials science; Injection moulding; Microscale chemistry; Extrusion; Insert (composites); Ultrasonic testing; Process (computing); Polymer; Composite material; Mechanical engineering; Acoustics; Computer science","retraction":null,"screen_n_in":null,"score":{"opus":0.004616871986548534,"gpt":0.1782461610752451,"spread":0.1736292890886966,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00007061232,0.0001752373,0.0002133627,0.0001850209,0.00004272678,0.00004635199,0.0000612173,0.00006581053,0.00001073351],"category_scores_gemma":[0.00001572431,0.0001898914,0.00002544878,0.0001614033,0.00002114517,0.0001101466,0.00003173721,0.0001248267,0.000001613634],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003037283,"about_ca_system_score_gemma":0.000004938847,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004115931,"about_ca_topic_score_gemma":0.000005749935,"domain_scores_codex":[0.9992919,0.000009976384,0.0002466826,0.0001536182,0.00009035131,0.0002074623],"domain_scores_gemma":[0.9997061,0.0001150154,0.00002590908,0.00007557681,0.00002483688,0.00005252031],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000006094255,0.0000117878,0.002976601,0.000215363,0.00003029565,0.000003764351,0.0002291905,0.2626966,0.7325116,0.0001452665,0.000002767401,0.001170713],"study_design_scores_gemma":[0.0002179034,0.00002352897,0.001867634,0.0001966722,0.00002330513,0.00003023436,0.00001148946,0.438563,0.558762,0.000007920505,0.00008382431,0.0002125263],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9867038,0.002667083,0.01027847,0.0000124281,0.00006353971,0.0000682164,0.0000098843,0.00009812316,0.00009852749],"genre_scores_gemma":[0.9942445,0.0008245566,0.004819641,0.000004921067,0.00003073,0.00001621618,0.000009531877,0.00003769644,0.00001218568],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1758664,"threshold_uncertainty_score":0.7743545,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2894498520","doi":"10.3390/nano8100779","title":"Effect of Hybrid Carbon Fillers on the Electrical and Morphological Properties of Polystyrene Nanocomposites in Microinjection Molding","year":2018,"lang":"en","type":"article","venue":"Nanomaterials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; Western University","funders":"Natural Sciences and Engineering Research Council of Canada; China Scholarship Council","keywords":"Materials science; Composite material; Carbon nanotube; Polystyrene; Carbon black; Mold; Shearing (physics); Nanocomposite; Molding (decorative); Scanning electron microscope; Annealing (glass); Polymer","retraction":null,"screen_n_in":null,"score":{"opus":0.009827424760368417,"gpt":0.2034555283386967,"spread":0.1936281035783282,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003948706,0.0001199591,0.0002552471,0.0001075595,0.00004090803,0.00001870145,0.00007211842,0.00005034628,0.00002538532],"category_scores_gemma":[0.00006634514,0.00006875642,0.00002619374,0.0001145825,0.0001002227,0.00003298718,0.00002052559,0.00004764479,0.000001295967],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002500984,"about_ca_system_score_gemma":0.000006006878,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00009130176,"about_ca_topic_score_gemma":0.000001401278,"domain_scores_codex":[0.9992815,0.0001259643,0.0002531512,0.0001149585,0.00008258373,0.0001418851],"domain_scores_gemma":[0.9997457,0.00007138037,0.00005098062,0.00009102075,0.00002684898,0.00001401389],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0002542498,0.000009051958,0.0005651378,0.0001346406,0.00001363879,0.00000125596,0.0001382733,0.0002344057,0.997877,0.00001895009,0.00001802916,0.0007353476],"study_design_scores_gemma":[0.0001994398,0.0008079062,0.0002298602,0.0001319639,0.00000896895,0.0000317041,0.000008318845,0.001634775,0.9968327,0.000009984096,0.00002587231,0.0000784857],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9987362,0.0005279997,0.000002701707,0.00001350957,0.0002366024,0.0002003526,0.000002961348,0.00004870582,0.0002309501],"genre_scores_gemma":[0.9998044,0.00005330514,0.00002483758,0.000008112686,0.00005910552,0.00002564795,5.911791e-7,0.00001381141,0.00001016011],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.001400369,"threshold_uncertainty_score":0.2803805,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2739229577","doi":"10.1016/j.powtec.2017.07.056","title":"Influence of segregation on rheological properties of wax-based feedstocks","year":2017,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"Pratt and Whitney Canada; Pratt & Whitney","keywords":"Rheology; Materials science; Shear thinning; Viscosity; Dilatant; Wax; Composite material; Shear rate","retraction":null,"screen_n_in":null,"score":{"opus":0.01921595751878588,"gpt":0.2223314424855782,"spread":0.2031154849667923,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0000615364,0.00008718468,0.0001597172,0.000163638,0.00008783808,0.000008539713,0.0002508869,0.000178163,0.00001125665],"category_scores_gemma":[0.0001554181,0.00006589047,0.00002499019,0.00007023424,0.0003021042,0.00006751397,0.00003107764,0.0001382799,0.000006952846],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001404209,"about_ca_system_score_gemma":0.00001357226,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002837839,"about_ca_topic_score_gemma":0.000004589479,"domain_scores_codex":[0.9995316,0.000006155863,0.0001685077,0.00009719495,0.0000796618,0.0001168249],"domain_scores_gemma":[0.9994832,0.000007965013,0.00008481515,0.0003187819,0.00009458484,0.00001062252],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001349582,0.00009552478,0.02365133,0.000776111,0.00006777036,0.000002944344,0.0003004092,0.2620836,0.663699,0.02232195,0.0001064312,0.02675998],"study_design_scores_gemma":[0.0001924533,0.0001826496,0.005706386,0.0001417659,0.000006377951,0.000002696091,0.00002636895,0.005572272,0.986524,0.00130701,0.0002432332,0.0000947903],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9978513,0.0002083605,0.0003008032,0.0003686047,0.00006262316,0.00008636635,0.000001541985,0.0002253603,0.0008950764],"genre_scores_gemma":[0.9995807,0.00001570406,0.0002833092,0.00001844515,0.000006629467,0.0000258212,3.438913e-7,0.00001026604,0.00005876311],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.322825,"threshold_uncertainty_score":0.2686935,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2083832246","doi":"10.1016/j.compositesa.2012.06.010","title":"Spring-in behavior of curved composites manufactured by Flexible Injection","year":2012,"lang":"en","type":"article","venue":"Composites Part A Applied Science and Manufacturing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Distortion (music); Materials science; Molding (decorative); Composite number; Composite material; Fabrication; Repeatability; Mechanical engineering; Structural engineering; Engineering; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.01351875731733031,"gpt":0.2211103581838309,"spread":0.2075916008665006,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003774176,0.000185517,0.0002172057,0.0002516519,0.0002134649,0.00008430255,0.0001822372,0.00006425061,0.00001707806],"category_scores_gemma":[0.000003738183,0.000172104,0.00002474305,0.0002083897,0.0001973694,0.0004302905,0.00007871797,0.0001701635,0.000007434318],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007346978,"about_ca_system_score_gemma":0.00001151319,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00007103523,"about_ca_topic_score_gemma":0.000008985613,"domain_scores_codex":[0.9987988,0.00000841401,0.0002589778,0.0002207577,0.0002677884,0.0004452726],"domain_scores_gemma":[0.9996216,0.00002796426,0.0000504486,0.0001583549,0.00002640917,0.0001152433],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002377236,0.00006860591,0.01805965,0.0001493788,0.000009795541,4.00783e-7,0.0007698062,0.008171564,0.9661202,0.0001672632,0.0001504909,0.006309032],"study_design_scores_gemma":[0.0001990202,0.00002801925,0.02717974,0.00003147653,0.00001260621,0.000007541209,0.0000893318,0.001048967,0.9682401,0.00002396903,0.002924202,0.0002150587],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9954546,0.0009193967,0.0007433104,0.00000750565,0.0003157207,0.0002272791,0.00000381121,0.0001665816,0.002161772],"genre_scores_gemma":[0.9991937,0.00005005613,0.000559372,0.00002675648,0.00005142953,0.00005595742,0.000004112463,0.00001839257,0.00004017656],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.009120091,"threshold_uncertainty_score":0.7018196,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4323276161","doi":"10.1016/j.powtec.2023.118395","title":"Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding","year":2023,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Rio Tinto (Canada); École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Metal injection molding; Iron powder; Raw material; Ultimate tensile strength; Molding (decorative); Sintering; Metal powder; Composite material; Viscosity; Ceramic; Microstructure; Particle size; Metallurgy; Relative density; Carbonyl iron; Powder metallurgy; Particle (ecology); Metal; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01348674839014568,"gpt":0.2100947786778971,"spread":0.1966080302877514,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002959394,0.0002079552,0.0003172971,0.0004567611,0.000071911,0.00001589461,0.0002433067,0.0002732416,0.00002097618],"category_scores_gemma":[0.0003747046,0.0001536125,0.00004672473,0.0009100706,0.0002924319,0.0001049351,0.00007927103,0.0003378514,0.000004825704],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000416892,"about_ca_system_score_gemma":0.00002999568,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001420023,"about_ca_topic_score_gemma":0.00003368206,"domain_scores_codex":[0.9988251,0.00005358921,0.0003954798,0.0002640914,0.0001765948,0.0002851428],"domain_scores_gemma":[0.9992828,0.000108228,0.00008601024,0.0003960792,0.0001055055,0.00002138509],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001161719,0.00006716053,0.02273336,0.001278403,0.00006203721,0.000002145784,0.00130496,0.5385031,0.4343134,0.0005731398,0.00006841026,0.0009777329],"study_design_scores_gemma":[0.0006059779,0.0002620931,0.02237132,0.0006855806,0.0000273056,0.000007417987,0.001495051,0.03840402,0.9346823,0.001050876,0.0001027218,0.0003053697],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9975991,0.0004681329,0.00001662939,0.0009809831,0.00009136875,0.0003571702,0.000005945061,0.0004387419,0.00004188971],"genre_scores_gemma":[0.9997196,0.00002276196,0.0000286247,0.00004425069,0.000009288331,0.00009416263,8.41599e-7,0.00003544941,0.00004497613],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5003688,"threshold_uncertainty_score":0.6264135,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3040622894","doi":"10.1177/0021998320938454","title":"Injection molding of short fiber thermoplastic bio-composites: Prediction of the fiber orientation","year":2020,"lang":"en","type":"article","venue":"Journal of Composite Materials","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":17,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université Laval","funders":"","keywords":"Materials science; Composite material; Molding (decorative); Fiber; Mold; Thermoplastic; Rheology; Orientation (vector space); Anisotropy; Compression molding; Aspect ratio (aeronautics); Thermoplastic composites; Flow (mathematics); Geometry; Optics; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.01629751644822526,"gpt":0.2108292858367621,"spread":0.1945317693885368,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001806946,0.0001036044,0.0002544897,0.00008112621,0.00005007805,0.00003452499,0.0001213259,0.00005787895,0.0002277434],"category_scores_gemma":[0.0000215864,0.00007125886,0.00008020425,0.0001825211,0.00002957986,0.0002032892,0.00002199042,0.00009026807,0.000003723689],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003236142,"about_ca_system_score_gemma":0.00001420612,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005498099,"about_ca_topic_score_gemma":1.38662e-7,"domain_scores_codex":[0.9989424,0.00006061072,0.0006273949,0.00006103588,0.0002257798,0.00008276372],"domain_scores_gemma":[0.9994164,0.00003418025,0.0002609284,0.00007178159,0.0001849282,0.00003181052],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001324198,0.00001190582,0.0006147953,0.0002093888,0.00007054381,4.353358e-7,0.0009170488,0.150074,0.8473036,0.000007329907,0.0001627888,0.000495734],"study_design_scores_gemma":[0.0002145734,0.0002336442,0.005392162,0.0002426541,0.000084962,0.0000343618,0.00005227081,0.001998325,0.9910564,0.00002546808,0.0006010652,0.00006409195],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9974773,0.0001761697,0.001138268,0.00004400011,0.000796265,0.00009399452,0.00002402739,0.00002552806,0.0002244715],"genre_scores_gemma":[0.999323,0.00003428449,0.0003414685,0.00001717755,0.0002393338,0.000001789861,0.000002447922,0.0000186546,0.00002187366],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1480757,"threshold_uncertainty_score":0.2905852,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2770204655","doi":"10.3139/217.3472","title":"Flow and Thermal History Effects on Morphology and Tensile Behavior of Poly(oxymethylene) Micro Injection Molded Parts","year":2017,"lang":"en","type":"article","venue":"International Polymer Processing","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Micromolding Solutions (Canada); National Research Council Canada; McGill University","funders":"","keywords":"Materials science; Crystallinity; Differential scanning calorimetry; Composite material; Molding (decorative); Shrinkage; Polymer; Morphology (biology); Microstructure","retraction":null,"screen_n_in":null,"score":{"opus":0.01638487041648473,"gpt":0.2371299881178469,"spread":0.2207451177013622,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00007362473,0.0001299837,0.0001383745,0.0001213342,0.0001461169,0.00006350743,0.0001102365,0.00008366949,0.00002492732],"category_scores_gemma":[0.00002923177,0.0001208385,0.00002390619,0.00001499355,0.0001215873,0.0002273395,0.0000401276,0.0001259107,0.00000190704],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005247806,"about_ca_system_score_gemma":0.00001917494,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001025541,"about_ca_topic_score_gemma":0.000004467366,"domain_scores_codex":[0.9994226,0.00001345966,0.0001539703,0.0001684651,0.0001190918,0.0001224501],"domain_scores_gemma":[0.9996752,0.00002320267,0.00009674559,0.0001094897,0.00005943863,0.00003589585],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000826849,0.00003545457,0.007886906,0.0002392274,0.00005371812,0.00001341986,0.001010728,0.0007281645,0.4290695,0.00005772711,0.0001795313,0.560643],"study_design_scores_gemma":[0.0006558605,0.000140287,0.03126623,0.0002654084,0.00004784083,0.00009821844,0.00005352813,0.01565974,0.9503879,0.00004291562,0.00110387,0.0002782292],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9868396,0.009596254,0.0002898722,0.0001225863,0.001100061,0.00007126157,0.000005335695,0.00007002629,0.001905015],"genre_scores_gemma":[0.9988989,0.0000501289,0.000267379,0.0001068608,0.000171321,0.00002602927,0.000003007578,0.00002536742,0.0004510144],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5603647,"threshold_uncertainty_score":0.4927652,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2405999279","doi":"10.1016/j.powtec.2016.05.046","title":"Improvement of flow of an iron-copper-graphite powder mix through additions of nanoparticles","year":2016,"lang":"en","type":"article","venue":"Powder Technology","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Rio Tinto (Canada); National Research Council Canada; Université Laval","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Lubricant; Nanoparticle; Copper; Materials science; Carbon black; Graphite; Ferrous; Mixing (physics); Powder metallurgy; Chemical engineering; Metallurgy; Composite material; Sintering; Nanotechnology","retraction":null,"screen_n_in":null,"score":{"opus":0.009832327986765874,"gpt":0.2137986428744658,"spread":0.2039663148876999,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00006496183,0.0001136785,0.0002217851,0.0002140193,0.00003489597,0.000002179352,0.0001681612,0.0001423734,0.0001679297],"category_scores_gemma":[0.00002831602,0.00008282698,0.0000505825,0.0002934492,0.0002575899,0.000134134,0.00003705421,0.00007731392,0.000005091609],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000145028,"about_ca_system_score_gemma":0.00001151951,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002746031,"about_ca_topic_score_gemma":0.00001814697,"domain_scores_codex":[0.9992379,0.000009397325,0.0003289288,0.0001345743,0.00009799937,0.0001912256],"domain_scores_gemma":[0.9994755,0.00002125254,0.00007758645,0.0003014864,0.0001053139,0.00001889424],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001189591,0.00006533218,0.0002956527,0.0001336656,0.00004491716,4.135628e-7,0.0002812317,0.0003851221,0.9671452,0.002393907,0.0002223057,0.02902034],"study_design_scores_gemma":[0.0003162781,0.0003216407,0.0001989498,0.00008056236,0.00001904249,0.000004614627,0.0003346945,0.000182484,0.9927604,0.004405243,0.001268508,0.0001075368],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9972702,0.000575727,0.0009304094,0.0003427409,0.0001399941,0.0001043049,0.00008493732,0.0002138178,0.0003378135],"genre_scores_gemma":[0.9977224,0.0001432903,0.001998405,0.00001387238,0.00001329745,0.0000370329,0.000002652941,0.00002183523,0.00004719825],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.0289128,"threshold_uncertainty_score":0.3377586,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2117224904","doi":"10.1002/app.10450","title":"A study on weld line morphology and mechanical strength of injection molded polystyrene/poly(methyl methacrylate) blends","year":2002,"lang":"en","type":"article","venue":"Journal of Applied Polymer Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université Laval","funders":"","keywords":"Materials science; Composite material; Weld line; Ultimate tensile strength; Methyl methacrylate; Polystyrene; Poly(methyl methacrylate); Scanning electron microscope; Izod impact strength test; Polymer blend; Phase (matter); Welding; Polymer; Polymerization; Copolymer; Chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.02398014994932673,"gpt":0.2475649057607489,"spread":0.2235847558114222,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006390892,0.0001502705,0.0003008605,0.0004862915,0.0001152372,0.00003876791,0.0002502832,0.00007121373,0.00006078044],"category_scores_gemma":[0.00001671167,0.0001165652,0.00004574629,0.000642769,0.0001527247,0.0001721599,0.00004602198,0.0003270252,0.000003210598],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000377404,"about_ca_system_score_gemma":0.00003108475,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001788744,"about_ca_topic_score_gemma":0.000002284226,"domain_scores_codex":[0.9986821,0.00002275872,0.0004590234,0.000179894,0.0004252694,0.0002309945],"domain_scores_gemma":[0.9994079,0.00005517003,0.0001832037,0.0001594545,0.00008313252,0.0001111024],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0003014333,0.0004814212,0.0002162388,0.00005814417,0.0002048697,0.00002609619,0.007841243,0.00684213,0.8760603,0.0025038,0.0001150008,0.1053493],"study_design_scores_gemma":[0.0006623491,0.001412278,0.0002251074,0.00002625749,0.00004808663,0.0001330578,0.001279183,0.005105348,0.9907677,0.000148243,0.00003537675,0.0001569914],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9957182,0.001831668,0.0004177314,0.00006593933,0.0005068833,0.00007529195,0.000001637533,0.00003172484,0.001350899],"genre_scores_gemma":[0.9993128,0.0001031669,0.0003742058,0.00004113431,0.00009899017,0.000003922479,5.121911e-8,0.00001441446,0.00005132998],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1147074,"threshold_uncertainty_score":0.4753391,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4400002399","doi":"10.3390/polym16131796","title":"Injection Molding of Polymers and Polymer Composites","year":2024,"lang":"en","type":"editorial","venue":"Polymers","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Western University","funders":"China Postdoctoral Science Foundation; National Natural Science Foundation of China","keywords":"Materials science; Molding (decorative); Aerospace; Polymer; Composite material; Electronics; Electronic packaging; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.00624005937476235,"gpt":0.2160412961671435,"spread":0.2098012367923812,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.000106275,0.0003670131,0.0004174616,0.0004401638,0.00008340072,0.00009479016,0.0001382041,0.0005296475,0.0002403195],"category_scores_gemma":[0.00002622433,0.0003540978,0.0001148523,0.0002691934,0.0001142408,0.000111679,0.00005842364,0.0005786759,0.00001523354],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006842823,"about_ca_system_score_gemma":0.00006085103,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0005448534,"about_ca_topic_score_gemma":0.00001360544,"domain_scores_codex":[0.9986423,0.00002123307,0.0003618681,0.0003096888,0.0003673513,0.0002975971],"domain_scores_gemma":[0.9994931,0.0001342911,0.00007478426,0.0001723234,0.00004486183,0.00008064693],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"not_applicable","study_design_gemma":"not_applicable","study_design_scores_codex":[0.00008245606,0.00001934239,0.00003292209,0.004574897,0.0007768328,0.000009465662,0.001910402,0.001680366,0.03401725,0.0002436926,0.9136771,0.04297528],"study_design_scores_gemma":[0.0004320378,0.0002709044,0.000007186437,0.001301505,0.00047648,0.00002424402,0.0004748688,0.002973127,0.1937706,0.00006855309,0.7989918,0.001208756],"study_design_candidate":"not_applicable","study_design_consensus":"not_applicable","genre_codex":"editorial","genre_gemma":"editorial","genre_scores_codex":[0.004511139,0.09314995,0.00005178728,0.00002826573,0.8878806,0.0001187321,0.0001655696,0.0005483415,0.01354566],"genre_scores_gemma":[0.4453713,0.003875442,0.00008162364,0.00003054285,0.5377084,0.0000622463,0.0001812544,0.0004455009,0.01224373],"genre_candidate":"editorial","genre_consensus":"editorial","teacher_disagreement_score":0.4408601,"threshold_uncertainty_score":0.9998911,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1972672034","doi":"10.1002/pen.20259","title":"Temperature control in injection molding. Part II: Controller design, simulation, and implementation","year":2004,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of New Brunswick","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Decoupling (probability); Temperature control; Model predictive control; Thermal; Injection molding machine; Molding (decorative); Materials science; Controller (irrigation); Control theory (sociology); Computer science; Control (management); Control engineering; Engineering; Composite material; Thermodynamics; Mold; Artificial intelligence; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.009501804219981242,"gpt":0.2318417609336548,"spread":0.2223399567136735,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002417092,0.0001042916,0.00009905531,0.0001893517,0.0001718511,0.00009007676,0.00004222121,0.00003796112,0.000004509096],"category_scores_gemma":[0.00001952713,0.00009564612,0.000008875834,0.0003012803,0.00004337244,0.0003257747,0.00001101432,0.00009354536,4.908233e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004712541,"about_ca_system_score_gemma":0.0000202213,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004836906,"about_ca_topic_score_gemma":0.00000491102,"domain_scores_codex":[0.9993919,0.000005015218,0.00013816,0.0001546345,0.0001113963,0.0001989005],"domain_scores_gemma":[0.999836,0.00002197831,0.00001296952,0.00004572445,0.00002930303,0.00005403792],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000005692063,0.000002746546,0.0002853847,0.00001595518,0.000003696126,3.878651e-7,0.0006618123,0.9543026,0.04251664,0.0002394626,0.000003256397,0.001962376],"study_design_scores_gemma":[0.001439782,0.0001074347,0.003631025,0.00006059824,0.000009164643,0.00001745011,0.0001495891,0.9372824,0.05679464,0.0001069058,0.0001462291,0.0002548188],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9751936,0.002213464,0.02195905,0.00006741323,0.000250845,0.0001474357,0.000002154176,0.0001416909,0.00002436898],"genre_scores_gemma":[0.9995639,0.00004880119,0.0002523688,0.00004324617,0.00004356503,0.00002361325,4.553663e-7,0.00001043551,0.00001358639],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.02437035,"threshold_uncertainty_score":0.3900336,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2002133456","doi":"10.1002/pc.20084","title":"Study on mechanical properties and material distribution of sandwich plaques molded by co‐injection","year":2005,"lang":"en","type":"article","venue":"Polymer Composites","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"National Research Council Canada; Polytechnique Montréal","funders":"","keywords":"Materials science; Composite material; Flexural strength; Flexural modulus; Polypropylene; Molding (decorative); Core (optical fiber); Glass fiber; Optical microscope; Modulus; Fiber; Elastic modulus; Izod impact strength test; Scanning electron microscope; Ultimate tensile strength","retraction":null,"screen_n_in":null,"score":{"opus":0.01827662711430059,"gpt":0.2230675549764649,"spread":0.2047909278621643,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00006153644,0.0001297957,0.0001583571,0.0000409587,0.00008927283,0.00005092474,0.00005376442,0.00005183304,0.00002317631],"category_scores_gemma":[0.00000406881,0.0001047273,0.00002071619,0.00005553043,0.00002927084,0.0001120379,0.00001575205,0.00007386909,0.000005340862],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002612285,"about_ca_system_score_gemma":0.000003802759,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00007238297,"about_ca_topic_score_gemma":0.000004800109,"domain_scores_codex":[0.9993997,0.00003164448,0.0001921489,0.0001273525,0.0001237752,0.0001254001],"domain_scores_gemma":[0.9998214,0.00001367166,0.00002760035,0.00008182248,0.00002452536,0.00003103082],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001805328,0.0001479134,0.0007958701,0.00005562705,0.00005906661,3.643228e-7,0.0006201805,0.0005738571,0.9944333,0.00009071119,0.0007934408,0.002249147],"study_design_scores_gemma":[0.0002880959,0.0004374489,0.0006726845,0.00003206463,0.0000209258,0.000007459392,0.0001671638,0.00185351,0.9961679,0.000005762917,0.0002174045,0.0001296097],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9981863,0.0009114247,0.0001571407,0.00004281791,0.0001530022,0.0001494288,0.00004773482,0.0001745609,0.0001775506],"genre_scores_gemma":[0.9996915,0.00002462109,0.00002243308,0.00001527806,0.00009475288,0.00002537358,0.00003046225,0.00001751426,0.00007800156],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.002119537,"threshold_uncertainty_score":0.4270656,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2168594880","doi":"10.1002/pen.20887","title":"Thermal residual stress development for semi‐crystalline polymers in rotational molding","year":2007,"lang":"en","type":"article","venue":"Polymer Engineering and Science","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Calgary","funders":"","keywords":"Materials science; Residual stress; Composite material; Molding (decorative); Exothermic reaction; Thermoelastic damping; Crystallization; Polymer; Endothermic process; Crystallization of polymers; Crystallinity; Stress (linguistics); Thermal; Thermodynamics; Adsorption","retraction":null,"screen_n_in":null,"score":{"opus":0.0116891302178297,"gpt":0.2203996705369757,"spread":0.208710540319146,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004326015,0.0001083071,0.00008411091,0.0002555904,0.0001150058,0.00005264094,0.0001015685,0.00003335441,0.00001326999],"category_scores_gemma":[0.00002266663,0.0001039463,0.00001114529,0.0002864549,0.0000484956,0.0001811317,0.00001924647,0.00008180424,5.271533e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005125785,"about_ca_system_score_gemma":0.00004069871,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001536025,"about_ca_topic_score_gemma":0.000009221842,"domain_scores_codex":[0.9991469,0.000001561072,0.0001778513,0.0001573029,0.0001691883,0.0003471565],"domain_scores_gemma":[0.9997903,0.00004540157,0.00001259643,0.00005315797,0.00002539377,0.00007315764],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001961183,0.00001184882,0.001525719,0.0001536873,0.00001150697,0.000002965238,0.002647895,0.7383049,0.2122925,0.0008639679,0.000005069403,0.04416039],"study_design_scores_gemma":[0.0003520492,0.00002491647,0.0124522,0.0001185611,0.000003649787,0.00000709223,0.0002842934,0.3345363,0.651103,0.000006291752,0.0007596348,0.0003519605],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9726904,0.001718501,0.02488881,0.00001969516,0.0002165199,0.00007351086,0.000003279723,0.00011465,0.0002746233],"genre_scores_gemma":[0.9969914,0.00001072496,0.002772024,0.00001304739,0.00006860412,0.00001653537,0.000001965009,0.00001540107,0.0001103019],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4388105,"threshold_uncertainty_score":0.4238805,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null}]}