{"meta":{"page":1,"per_page":50,"max_per_page":100,"total":88,"total_is_capped":false,"direct_labels_cover":0,"predictions_cover":88,"direct_label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline (scores rank; they never assert a category)","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12"},"query_hash":"d5f4f7c5c2d9","filters":{"venue":"Advances in Materials Science and Engineering"}},"results":[{"id":"W2616958781","doi":"10.1155/2017/8453095","title":"Electrical Resistivity of Concrete for Durability Evaluation: A Review","year":2017,"lang":"en","type":"review","venue":"Advances in Materials Science and Engineering","topic":"Concrete Corrosion and Durability","field":"Engineering","cited_by":361,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Victoria","funders":"","keywords":"Durability; Materials science; Electrical resistivity and conductivity; Service life; Rebar; Corrosion; Chloride; Composite material; Permeability (electromagnetism); Forensic engineering; Metallurgy; Electrical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.06207809786797805,"gpt":0.375291279361482,"spread":0.313213181493504,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.004707094,0.0002694818,0.001440033,0.0001579677,0.00007108232,0.00005506334,0.000416493,0.0001003502,0.00002132338],"category_scores_gemma":[0.003723459,0.0002319429,0.00009376981,0.0003406448,0.000216793,0.0004611872,0.00007656539,0.0001197362,0.000001109348],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002108259,"about_ca_system_score_gemma":0.0002179671,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002622603,"about_ca_topic_score_gemma":0.000001916745,"domain_scores_codex":[0.9981542,0.00004957298,0.0007181207,0.0004080237,0.0003545773,0.0003155181],"domain_scores_gemma":[0.9987174,0.0003242941,0.0001671495,0.0005260307,0.0001882344,0.00007690125],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000003431092,0.000001491235,0.000001404034,0.09912439,0.000004003274,5.768824e-7,0.00000882614,0.00005567171,0.001104798,0.0001206663,0.00001555789,0.8995592],"study_design_scores_gemma":[0.0002430138,0.00004859951,0.00005097608,0.04419497,0.0002385093,0.00001491942,0.000001619214,0.004922116,0.0007670685,0.0001329915,0.9487902,0.0005950248],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0003504788,0.9973078,0.0001845338,0.000004391232,0.0006390808,0.001307738,0.00005893926,0.0000501784,0.00009688069],"genre_scores_gemma":[0.002102767,0.9967875,0.000624585,0.00000378814,0.00004926387,0.0004012666,0.000009806983,0.00001917554,0.000001885593],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.9487746,"threshold_uncertainty_score":0.9458355,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2114544041","doi":"10.1155/2012/828070","title":"A Review of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells: Materials and Fabrication Methods","year":2012,"lang":"en","type":"review","venue":"Advances in Materials Science and Engineering","topic":"Fuel Cells and Related Materials","field":"Engineering","cited_by":279,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Lambton College; University of Toronto","funders":"Natural Sciences and Engineering Research Council of Canada; Lambton College","keywords":"Materials science; Fabrication; Proton exchange membrane fuel cell; Anode; Cathode; Graphite; Fuel cells; Metal; Nanotechnology; Composite material; Electrode; Chemical engineering; Electrical engineering; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.02764729421128767,"gpt":0.3209395051586413,"spread":0.2932922109473537,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.003243081,0.0004709057,0.001846452,0.0003923587,0.0000461018,0.00009167524,0.0003002331,0.0002155682,0.00005152824],"category_scores_gemma":[0.0001537883,0.0003733707,0.00006064469,0.0004981078,0.0001412841,0.0007524696,0.0001151543,0.0000951989,0.000002869913],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000706042,"about_ca_system_score_gemma":0.00003617916,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006277044,"about_ca_topic_score_gemma":2.627594e-7,"domain_scores_codex":[0.9978297,0.00007463324,0.001005878,0.000404807,0.0001778758,0.0005070675],"domain_scores_gemma":[0.9990897,0.0001741403,0.0002718373,0.0002777517,0.00008308875,0.0001035172],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"systematic_review","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000002207902,0.000007080675,3.371621e-8,0.7560997,0.00002133666,4.475969e-7,0.00004232648,0.00003781567,0.1745612,0.0000343407,0.000002974075,0.06919056],"study_design_scores_gemma":[0.00009585605,0.00002571356,2.050995e-7,0.03982931,0.0002502564,0.0000160553,0.000003349861,0.00005753572,0.1689864,0.00002971787,0.7903193,0.0003863014],"study_design_candidate":"systematic_review","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0001147736,0.9954273,0.0002138714,0.000002012461,0.001856842,0.002140022,0.0001311233,0.00008229139,0.00003177874],"genre_scores_gemma":[0.00003818596,0.9841638,0.01459741,0.000007398658,0.0001485842,0.0009289437,0.0000355651,0.00007553037,0.000004598156],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.7903163,"threshold_uncertainty_score":0.9998719,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1995703380","doi":"10.1155/2012/854203","title":"Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies","year":2012,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Polymer composites and self-healing","field":"Materials Science","cited_by":200,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada; Canadian Space Agency; Fonds Québécois de la Recherche sur la Nature et les Technologies","keywords":"Self-healing; Multidisciplinary approach; Nanotechnology; Materials science; New product development; Risk analysis (engineering); Engineering ethics; Self-healing material; Systems engineering; Biochemical engineering; Computer science; Construction engineering; Management science; Engineering; Business; Medicine","retraction":null,"screen_n_in":null,"score":{"opus":0.03461995985447581,"gpt":0.2638574046479463,"spread":0.2292374447934705,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00224278,0.0002111692,0.0004485889,0.0002365508,0.0001360074,0.0001844882,0.0003099806,0.00007615548,0.00001070405],"category_scores_gemma":[0.0001469466,0.0001784388,0.000008936724,0.0004462635,0.0002055808,0.001456371,0.0002908568,0.0000530944,0.000002862275],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007031571,"about_ca_system_score_gemma":0.00004683153,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004311534,"about_ca_topic_score_gemma":0.000001661048,"domain_scores_codex":[0.9981359,0.00004097052,0.0005403102,0.0003439696,0.0003018608,0.0006369738],"domain_scores_gemma":[0.9994071,0.00007294136,0.0001612084,0.0002186674,0.00005543044,0.00008468301],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000009325506,0.00001923884,0.0003350661,0.0009734567,0.000002484036,9.471825e-7,0.0003802607,0.0003433774,0.9920555,0.004687236,4.586056e-7,0.001192649],"study_design_scores_gemma":[0.0001725323,0.00002613932,0.0007150915,0.000328927,0.00001077408,0.00003363715,0.000486123,0.0006312434,0.9959354,0.00007673554,0.001328765,0.0002546511],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9434186,0.05443062,0.0004779912,0.00004380016,0.001140758,0.0002489632,0.00001803516,0.0001693342,0.00005188279],"genre_scores_gemma":[0.9650065,0.01210476,0.02275421,0.00001027883,0.00005945939,0.00004637657,0.00000172939,0.00001531082,0.000001380947],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.04232586,"threshold_uncertainty_score":0.7276525,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3003723974","doi":"10.1155/2020/8689150","title":"Dielectric Properties, AC Conductivity, and Electric Modulus Analysis of Bulk Ethylcarbazole‐Terphenyl","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Conducting polymers and applications","field":"Materials Science","cited_by":171,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"University of Alberta","keywords":"Materials science; Terphenyl; Dielectric; Composite material; Conductivity; Electrical resistivity and conductivity; Modulus; Dielectric loss; Optoelectronics; Organic chemistry; Electrical engineering; Physical chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.01564356456682544,"gpt":0.2384384672367645,"spread":0.222794902669939,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004645271,0.0001196231,0.000305489,0.0002733681,0.00008847324,0.00008881155,0.000205531,0.00002807116,0.00001970514],"category_scores_gemma":[0.0001937433,0.0001041139,0.00001479025,0.00201388,0.0001490935,0.0006123739,0.0001164552,0.00005485791,0.000001128355],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002456548,"about_ca_system_score_gemma":0.00004361796,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00007013187,"about_ca_topic_score_gemma":0.000004595973,"domain_scores_codex":[0.9988603,0.00001486087,0.0002529951,0.000374008,0.0002132573,0.0002845777],"domain_scores_gemma":[0.9996126,0.00003527278,0.00008057897,0.0001348618,0.00004949316,0.00008715451],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000006947509,0.000008397204,0.0001829194,0.00005112087,0.000005193318,5.954937e-7,0.0004135387,0.00210504,0.9955864,0.0002482281,6.212888e-7,0.001391017],"study_design_scores_gemma":[0.000090489,0.00004048585,0.001541327,0.0000162366,0.00004140264,0.000002116563,0.00005692084,0.01447598,0.9834589,0.00004291692,0.00009711493,0.0001361381],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9962952,0.002701127,0.0005295977,0.0001476835,0.0001288613,0.000117068,0.000007111514,0.00003771918,0.00003560296],"genre_scores_gemma":[0.9987451,0.0005084695,0.0006329097,0.00004812026,0.00003167773,0.00002269476,7.408323e-7,0.000006968537,0.000003255511],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01237094,"threshold_uncertainty_score":0.4245641,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2930443672","doi":"10.1155/2019/3979471","title":"Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Additive Manufacturing Materials and Processes","field":"Engineering","cited_by":89,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; National Research Council Canada","funders":"National Research Council Canada; IHI; McGill University","keywords":"Materials science; Titanium alloy; Residual stress; Microstructure; Digital image correlation; Electron beam welding; Cathode ray; Composite material; Undercut; Beam (structure); Titanium; Substrate (aquarium); Surface integrity; Enhanced Data Rates for GSM Evolution; Alloy; Metallurgy; Optics; Electron; Computer science","retraction":null,"screen_n_in":null,"score":{"opus":0.00214390896300292,"gpt":0.1875724110214591,"spread":0.1854285020584561,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002774462,0.0002463088,0.0002927526,0.0003276936,0.00006528586,0.00009320736,0.000218969,0.00006944913,0.00007715254],"category_scores_gemma":[0.00002992612,0.000212963,0.00001201541,0.000329659,0.00013712,0.001031663,0.00007207538,0.0001189667,0.00002253394],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001018477,"about_ca_system_score_gemma":0.00002562581,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005572491,"about_ca_topic_score_gemma":0.000005905188,"domain_scores_codex":[0.9986462,0.000004879982,0.0002154659,0.0003724337,0.0002154601,0.0005455467],"domain_scores_gemma":[0.9996327,0.0000377726,0.00003731638,0.0001921685,0.00004165677,0.00005840213],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002368914,0.000006306036,0.0001415908,0.0003248816,0.000009554699,0.00001324719,0.00006942649,0.03494889,0.9630681,0.000488584,0.000007455184,0.0008982538],"study_design_scores_gemma":[0.0002060158,0.00009660085,0.002112274,0.0001775987,0.000004758942,0.00002635146,0.00007003958,0.0004566138,0.9905085,0.0001428243,0.005881044,0.000317392],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.997256,0.0005541327,0.0002519586,0.00001293816,0.0005095155,0.0002095378,0.00001685721,0.0005458296,0.0006432439],"genre_scores_gemma":[0.9974318,0.0008054032,0.001571747,0.00001479474,0.00006816175,0.00004842216,0.000005131579,0.0000366389,0.0000179144],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03449228,"threshold_uncertainty_score":0.8684379,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2095197078","doi":"10.1155/2015/624394","title":"Silver Nanoparticles: Synthesis, Properties, and Applications","year":2015,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Laser-Ablation Synthesis of Nanoparticles","field":"Engineering","cited_by":75,"is_retracted":false,"has_abstract":false,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Brock University","funders":"","keywords":"Materials science; Nanoparticle; Silver nanoparticle; Nanotechnology; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01845518273200409,"gpt":0.2168173987069213,"spread":0.1983622159749172,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005028542,0.00009887086,0.000125951,0.000108511,0.00004585223,0.000109349,0.0001136956,0.00002281596,0.000004581696],"category_scores_gemma":[0.0001771165,0.00008829154,0.000003929673,0.0002751068,0.0001376525,0.001099914,0.00004515024,0.00002849181,0.00001047976],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005308053,"about_ca_system_score_gemma":0.00002085759,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004653451,"about_ca_topic_score_gemma":0.000003376891,"domain_scores_codex":[0.9992386,0.000006901309,0.0001734884,0.0001688467,0.0001744292,0.0002377722],"domain_scores_gemma":[0.9996746,0.00004087987,0.00001420161,0.0001204706,0.00003726558,0.0001126216],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002285729,0.000005548647,0.0003152942,0.00005616253,0.000001140978,7.750212e-7,0.0001138803,0.02340293,0.9716325,0.0004139088,0.000004409132,0.004051134],"study_design_scores_gemma":[0.0001045159,0.000007743461,0.001201252,0.00005985643,0.000003941579,0.000007952593,0.000123565,0.01108826,0.9814879,0.0001430654,0.005606205,0.0001657129],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9963734,0.002626051,0.0004054104,0.00003153659,0.0001238831,0.0001391801,0.000002859238,0.0001465699,0.0001510861],"genre_scores_gemma":[0.9976985,0.0005053676,0.001603664,0.00001056807,0.00003803809,0.0001284268,1.830566e-7,0.00001261005,0.000002576613],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01231467,"threshold_uncertainty_score":0.3600425,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2980824056","doi":"10.1155/2019/6742392","title":"Assessment of Acoustic Emission and Triaxial Mechanical Properties of Rock-Cemented Tailings Matrix Composites","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Tailings Management and Properties","field":"Engineering","cited_by":71,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"First Quantum Minerals (Canada)","funders":"China Postdoctoral Science Foundation; Fundamental Research Funds for the Central Universities; Ministry of Education of the People's Republic of China; National Natural Science Foundation of China","keywords":"Acoustic emission; Materials science; Ultimate tensile strength; Compaction; Geotechnical engineering; Composite material; Tailings; Stress (linguistics); Geology; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.006596840305281299,"gpt":0.2303505194685495,"spread":0.2237536791632682,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004355557,0.0001088041,0.0002432009,0.0001625687,0.00002324558,0.00003479535,0.0001216162,0.00002737886,0.00001046806],"category_scores_gemma":[0.00004146866,0.00008809992,0.000009333728,0.0001843391,0.00004927619,0.0005107448,0.00009182585,0.0000451207,4.268005e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002267024,"about_ca_system_score_gemma":0.00001172419,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006500504,"about_ca_topic_score_gemma":5.484555e-7,"domain_scores_codex":[0.9991845,0.000006493208,0.0002851574,0.0001496378,0.0002008543,0.0001733015],"domain_scores_gemma":[0.9997776,0.00002074489,0.00004464481,0.0000891354,0.00003786958,0.00003000497],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001309024,0.000005764505,0.0004450964,0.0008610682,0.000003343814,2.599482e-7,0.00007283389,0.09983705,0.8983044,0.0002337122,3.304849e-7,0.0002230316],"study_design_scores_gemma":[0.0002865596,0.00006729009,0.0006403003,0.0003586655,0.000007450945,0.000001101441,0.0001239599,0.2019362,0.7963688,0.00002250298,0.0000775096,0.0001097258],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9965634,0.001469499,0.001365037,0.000005545166,0.0003090889,0.0001825343,0.00000177216,0.00004086004,0.00006230167],"genre_scores_gemma":[0.9974471,0.0008667242,0.001642573,0.000001905042,0.00001381696,0.000007587816,6.834244e-7,0.000009334679,0.00001025041],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1020991,"threshold_uncertainty_score":0.3592611,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2100971411","doi":"10.1155/2014/671795","title":"Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History","year":2014,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Concrete Properties and Behavior","field":"Engineering","cited_by":68,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Toronto","funders":"Stony Brook University; China Three Gorges Corporation","keywords":"Cracking; Materials science; Mass concrete; Reinforcement; Durability; Ultimate tensile strength; Composite material; Deformation (meteorology); Stress (linguistics); Creep; Thermal; Structural engineering; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.00930452613236693,"gpt":0.2232674381435014,"spread":0.2139629120111345,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005290609,0.0001367831,0.0002630581,0.00007886594,0.00004378062,0.00004900187,0.0001981129,0.00002824807,0.0000205281],"category_scores_gemma":[0.00003204353,0.00009105018,0.00001644585,0.0001040654,0.0001368323,0.000287501,0.00003439451,0.00008045992,0.00000166775],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009486602,"about_ca_system_score_gemma":0.000009985008,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001176418,"about_ca_topic_score_gemma":9.570052e-7,"domain_scores_codex":[0.9991696,0.00001994504,0.0002193975,0.0001649548,0.0002151094,0.000210955],"domain_scores_gemma":[0.9996899,0.00005174771,0.00002599396,0.0001733277,0.00002325868,0.0000357804],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002711293,0.000004299294,0.0000655816,0.00001740915,0.000002838899,0.000001761542,0.000490185,0.007877394,0.9912409,0.000188335,0.000002954734,0.00008125703],"study_design_scores_gemma":[0.002506603,0.0005921172,0.006316411,0.000124343,0.00001833307,0.000003259593,0.001816056,0.006851835,0.9801159,0.00001411376,0.001254275,0.0003867457],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9970645,0.001487088,0.00004423699,0.000008082483,0.0008635545,0.0002726738,0.000001486446,0.00004884864,0.0002095238],"genre_scores_gemma":[0.999685,0.00005133715,0.0001067973,0.00002180306,0.00004910847,0.00005723374,2.657831e-7,0.00001405915,0.00001440903],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01112496,"threshold_uncertainty_score":0.3712919,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2408104405","doi":"10.1155/2016/5027243","title":"Effects of La and Ce Addition on the Modification of Al-Si Based Alloys","year":2016,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":46,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Eutectic system; Materials science; Lanthanum; Cerium; Precipitation; Intermetallic; Rare earth; Alloy; Recalescence; Metallurgy; Melting temperature; Composite material; Inorganic chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.004008544891593801,"gpt":0.1931479242245746,"spread":0.1891393793329808,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002908063,0.00006928224,0.00009372293,0.00007274339,0.00001773324,0.00001354429,0.00008786773,0.00001893161,0.00000434076],"category_scores_gemma":[0.0001428667,0.00004074551,0.000004700451,0.0001033572,0.0001832843,0.0002880811,0.00001660873,0.00002064933,3.403771e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001786964,"about_ca_system_score_gemma":0.000008238011,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001958896,"about_ca_topic_score_gemma":4.760949e-7,"domain_scores_codex":[0.999572,0.00001034743,0.0001187162,0.00009450343,0.0001042141,0.0001002559],"domain_scores_gemma":[0.9996796,0.0001772621,0.00002451996,0.00008175077,0.00002216238,0.0000146731],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000004759937,0.000001865714,0.00002473513,0.0001518007,9.163398e-7,2.061314e-7,0.00006959728,0.003915259,0.9922472,0.0008932921,0.000002301233,0.002688066],"study_design_scores_gemma":[0.0001116004,0.00001982317,0.003877214,0.0002450584,0.000001916023,0.000001049926,0.000009322065,0.003363538,0.9919244,0.0001430842,0.0002456901,0.00005732569],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9970407,0.0004495063,0.00217348,0.00003637133,0.0001303761,0.00009467847,0.000006375883,0.00002290864,0.00004561764],"genre_scores_gemma":[0.9985207,0.0004788099,0.0009581273,0.000009528842,0.000008359639,0.00001633745,2.792281e-7,0.000006951102,9.077515e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.003852478,"threshold_uncertainty_score":0.1661554,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1998819497","doi":"10.1155/2014/921815","title":"Compressive Strength of Compacted Clay-Sand Mixes","year":2014,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Geotechnical Engineering and Soil Stabilization","field":"Engineering","cited_by":44,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Regina","funders":"University of Regina","keywords":"Compressive strength; Materials science; Compaction; Shearing (physics); Geotechnical engineering; Composite material; Brittleness; Geology","retraction":null,"screen_n_in":null,"score":{"opus":0.003953009202728695,"gpt":0.2068004534521451,"spread":0.2028474442494164,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003157506,0.0001136347,0.0002064523,0.0001551165,0.00002693439,0.00003086785,0.0001409149,0.00003928856,0.000006006823],"category_scores_gemma":[0.0001774433,0.0001086438,0.000008990903,0.0003508826,0.0001066464,0.0003821209,0.00002948413,0.00006022465,8.298038e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002600743,"about_ca_system_score_gemma":0.000006380272,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009866259,"about_ca_topic_score_gemma":0.000001825263,"domain_scores_codex":[0.9992387,0.000006681119,0.0002240035,0.0001386968,0.0001653858,0.0002264792],"domain_scores_gemma":[0.9996886,0.000065245,0.00002311159,0.0001254995,0.00004150713,0.00005603804],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000001374825,0.000003929167,0.00007232278,0.0001244844,9.554866e-7,2.141865e-7,0.00005110221,0.5128462,0.4847573,0.0007420413,9.559619e-7,0.00139911],"study_design_scores_gemma":[0.0002807761,0.0000398247,0.008580788,0.0002001887,0.000004103067,0.000003385167,0.00002502379,0.5359504,0.4534067,0.000222145,0.001046559,0.0002401964],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9905424,0.0004787854,0.00795704,0.000004686133,0.0003685259,0.00006453441,0.000005208601,0.0001524247,0.0004264076],"genre_scores_gemma":[0.9981346,0.0003445624,0.001476863,0.0000027636,0.00001931262,0.000007233403,0.000002214936,0.00001164227,8.627497e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03135063,"threshold_uncertainty_score":0.4430365,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1998966199","doi":"10.1155/2012/303014","title":"Effects of Aging Temperature on Moisture Absorption of Perforated GFRP","year":2012,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Mechanical Behavior of Composites","field":"Engineering","cited_by":44,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Dalhousie University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Composite material; Composite number; Moisture; Bending; Fibre-reinforced plastic; Flexural strength; Bending stiffness; Epoxy; Stiffness; Humidity; Glass fiber; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.003842490556793276,"gpt":0.2197942041664996,"spread":0.2159517136097063,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003083141,0.0001019861,0.0001776334,0.0001429741,0.0000174805,0.00001465202,0.0001124705,0.00004146345,0.000004896918],"category_scores_gemma":[0.00006137422,0.00009088649,0.000009416176,0.0003017771,0.00004487342,0.0005441136,0.00002392799,0.00006806802,9.860211e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002860339,"about_ca_system_score_gemma":0.000004513405,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001751153,"about_ca_topic_score_gemma":2.02775e-7,"domain_scores_codex":[0.9993281,0.000006674984,0.0001769754,0.00009443529,0.0001786958,0.0002150671],"domain_scores_gemma":[0.9997516,0.00005268478,0.00002665468,0.00009097243,0.00002982768,0.00004821098],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002921807,0.000009605446,0.0003096883,0.0003900258,0.000001049139,4.659707e-7,0.00009325101,0.02252022,0.9757527,0.000526564,6.743113e-7,0.000392878],"study_design_scores_gemma":[0.0001016143,0.00002942576,0.01566441,0.0002694673,0.00000424323,0.000001702644,0.00001017062,0.001376427,0.9824017,0.00001774305,0.00003148324,0.00009164685],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.99733,0.001758583,0.0001752968,0.000002696866,0.0005611238,0.00009158107,0.000002165111,0.00004507676,0.00003347123],"genre_scores_gemma":[0.9983675,0.0003407404,0.001229833,0.00000349131,0.00003736327,0.000008810497,9.051191e-7,0.00001034295,9.364736e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.0211438,"threshold_uncertainty_score":0.3706244,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2804481222","doi":"10.1155/2018/2804576","title":"Cold‐Sprayed Metal Coatings with Nanostructure","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"High-Temperature Coating Behaviors","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Trinity College","funders":"","keywords":"Materials science; Nanostructure; Metal; Gas dynamic cold spray; Nanotechnology; Metallurgy; Chemical engineering; Coating","retraction":null,"screen_n_in":null,"score":{"opus":0.003146299894674255,"gpt":0.2098512640758874,"spread":0.2067049641812131,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003137954,0.0001772065,0.0001910917,0.0001605608,0.00009691987,0.0001291379,0.0001967938,0.00004904532,0.00002009667],"category_scores_gemma":[0.00007181432,0.0001473195,0.000006527294,0.0005980572,0.0002695231,0.0008751923,0.00004006804,0.00009279702,0.000006368979],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005883629,"about_ca_system_score_gemma":0.00002419661,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000068172,"about_ca_topic_score_gemma":0.00001548644,"domain_scores_codex":[0.9989454,0.000005664148,0.0001784027,0.0002464337,0.0002524616,0.0003716359],"domain_scores_gemma":[0.9996524,0.00002129605,0.00002318187,0.0001566255,0.00007251989,0.00007397232],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000003232066,0.000001765392,0.0002173965,0.00003794846,0.00000115016,0.000005734626,0.0003093159,0.004042902,0.9950722,0.0001861653,0.000004692661,0.0001174508],"study_design_scores_gemma":[0.0001693523,0.00006492813,0.001877224,0.0001016608,0.000005282175,0.0000232843,0.00004368343,0.0003973599,0.9951365,0.00001125197,0.00192793,0.00024155],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9980884,0.0002338452,0.0004022787,0.000007220055,0.0008553048,0.0001157125,0.000007064078,0.0002123354,0.00007787562],"genre_scores_gemma":[0.9907772,0.00006177683,0.00897877,0.00001375379,0.0001157591,0.00002007897,0.000001457104,0.00002612584,0.000005100995],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.008576491,"threshold_uncertainty_score":0.6007514,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2933094305","doi":"10.1155/2019/8238904","title":"Development of a Correlation between the Resilient Modulus and CBR Value for Granular Blends Containing Natural Aggregates and RAP/RCA Materials","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Asphalt Pavement Performance Evaluation","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Subbase; Rut; Materials science; Asphalt; Aggregate (composite); Economic shortage; Asphalt pavement; Modulus; Environmental science; Geotechnical engineering; Composite material; Engineering; Mathematics","retraction":null,"screen_n_in":null,"score":{"opus":0.006888334012659192,"gpt":0.2375983248700664,"spread":0.2307099908574072,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001265971,0.0001231842,0.0001987171,0.0001243893,0.00008570134,0.00006282167,0.00007968133,0.00003036079,0.000003340127],"category_scores_gemma":[0.0000540175,0.00009886027,0.00000533773,0.000145316,0.00007436315,0.0007768965,0.00005091495,0.00003844189,5.130822e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006084327,"about_ca_system_score_gemma":0.00002589662,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002713959,"about_ca_topic_score_gemma":0.00000166587,"domain_scores_codex":[0.9990789,0.000009129568,0.0003184363,0.000176044,0.0001942264,0.0002232957],"domain_scores_gemma":[0.9997166,0.00006693693,0.00006314438,0.00008770538,0.00003830646,0.00002730105],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001969369,0.000001447453,0.002742923,0.0004204224,0.000005990909,1.326828e-7,0.001450093,0.06879156,0.9181517,0.0006030026,3.363779e-7,0.007812645],"study_design_scores_gemma":[0.0005928412,0.00006027413,0.03807769,0.0003424016,0.00001316595,0.000003183822,0.0003142647,0.1603972,0.7994853,0.0001816512,0.0003100856,0.0002219076],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9950696,0.00170717,0.002103102,0.000007783677,0.0006640468,0.0003982525,0.000005966378,0.00002965315,0.00001438977],"genre_scores_gemma":[0.9937433,0.0003743104,0.005778847,0.000004351264,0.00003289299,0.00004499757,0.000007571992,0.00001119972,0.000002525402],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1186664,"threshold_uncertainty_score":0.4031405,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3007479123","doi":"10.1155/2020/2398693","title":"Evaluating Fly Ash‐Based Geopolymers as a Modifier for Asphalt Binders","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Concrete and Cement Materials Research","field":"Engineering","cited_by":41,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"University of Waterloo","funders":"","keywords":"Materials science; Fly ash; Geopolymer; Asphalt; Composite material; Waste management","retraction":null,"screen_n_in":null,"score":{"opus":0.03701373796476398,"gpt":0.3269963760708882,"spread":0.2899826381061242,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007423279,0.0001605932,0.0002094239,0.0001457794,0.00008492732,0.0001659613,0.0002271374,0.00003924354,0.00007647501],"category_scores_gemma":[0.0002926839,0.0001608156,0.00001758531,0.0003838144,0.00008369975,0.0006713731,0.00005202994,0.00005907651,0.000009462372],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005553382,"about_ca_system_score_gemma":0.00006336424,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009247102,"about_ca_topic_score_gemma":0.000001320479,"domain_scores_codex":[0.9985887,0.00001049688,0.0002528944,0.0002909586,0.0003563055,0.000500618],"domain_scores_gemma":[0.9996019,0.00007820064,0.00002203076,0.0001097038,0.00004961131,0.0001385602],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002362725,0.000001576473,0.00001513007,0.00027842,0.000002654262,0.000001965272,0.000135426,0.1097065,0.8854852,0.0001408159,0.000006745639,0.004201903],"study_design_scores_gemma":[0.0004397798,0.0001030271,0.00004361953,0.00004935749,0.000004270836,0.000001033341,0.0001018776,0.3102871,0.6877117,0.00004731739,0.001019409,0.0001914888],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9934459,0.0008938772,0.004308289,0.0001059573,0.0005226385,0.000356797,0.00001369139,0.0001443956,0.0002084802],"genre_scores_gemma":[0.9961032,0.000206582,0.003288523,0.0001279546,0.0001075454,0.0001321887,0.00000461901,0.00002573035,0.000003698783],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2005806,"threshold_uncertainty_score":0.6557868,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3008802098","doi":"10.1155/2020/1064870","title":"Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Additive Manufacturing Materials and Processes","field":"Engineering","cited_by":40,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Concordia University","funders":"Natural Sciences and Engineering Research Council of Canada; Concordia University","keywords":"Materials science; Microstructure; Fabrication; Ultimate tensile strength; Ultrasonic sensor; Consolidation (business); Composite material; Process optimization; Mechanical engineering; Acoustics","retraction":null,"screen_n_in":null,"score":{"opus":0.007930048803241704,"gpt":0.2056653800523053,"spread":0.1977353312490636,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000172526,0.0002358629,0.0002696577,0.00008269148,0.00007930349,0.000206739,0.000184008,0.00005389934,0.00004164581],"category_scores_gemma":[0.0001700395,0.0001999708,0.000009567469,0.00014869,0.0001840801,0.0009691898,0.0000695238,0.0001064126,0.000003223134],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002833895,"about_ca_system_score_gemma":0.00001797567,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002183375,"about_ca_topic_score_gemma":7.662744e-7,"domain_scores_codex":[0.9988407,0.00000808499,0.0002250514,0.0003542448,0.000184667,0.000387203],"domain_scores_gemma":[0.999685,0.0000349332,0.0000299931,0.0000798795,0.00003852773,0.0001316368],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003087495,0.000004021578,0.00001297536,0.0007354189,0.000007034191,0.00001110919,0.0008624514,0.01193055,0.9840103,0.0001655306,0.000009044764,0.002220678],"study_design_scores_gemma":[0.0001606386,0.00004893201,0.0007010622,0.000114558,0.000003971139,0.00001929111,0.0001806189,0.001141111,0.9960231,0.0002588898,0.00106058,0.0002872885],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9975206,0.001185164,0.0004391391,0.00005011432,0.000335657,0.0001656944,0.00004935583,0.0001781686,0.00007607291],"genre_scores_gemma":[0.9976459,0.001094806,0.001041069,0.00009970633,0.00005561628,0.0000318517,0.000003530864,0.00002673003,8.065472e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01201275,"threshold_uncertainty_score":0.8154573,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2887249078","doi":"10.1155/2018/4682076","title":"Dielectric Properties of TiO<sub>2</sub>/Silicone Rubber Micro‐ and Nanocomposites","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Dielectric materials and actuators","field":"Engineering","cited_by":31,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"Hydro-Québec; Université du Québec à Chicoutimi","keywords":"Materials science; Silicone rubber; Nanocomposite; Composite material; Dielectric; Silicone; Natural rubber; Optoelectronics","retraction":null,"screen_n_in":null,"score":{"opus":0.003462081819122655,"gpt":0.1787742896220036,"spread":0.1753122078028809,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003077928,0.0001422351,0.0002208628,0.0002164045,0.0000555654,0.00008144042,0.0001200936,0.00003517588,0.000004397151],"category_scores_gemma":[0.00005276251,0.0001230834,0.000007630108,0.0003987999,0.0002168513,0.000580911,0.00004957275,0.00003573232,0.000002436836],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002541304,"about_ca_system_score_gemma":0.00001371466,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006762604,"about_ca_topic_score_gemma":0.000002583933,"domain_scores_codex":[0.9991281,0.000005843377,0.0002365837,0.0001888196,0.0001291636,0.0003114719],"domain_scores_gemma":[0.9997614,0.00001583734,0.00002885561,0.0000970178,0.0000472234,0.00004966799],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000006263138,0.00000481599,0.00006620436,0.0001974769,0.000002577462,7.082427e-7,0.0001620424,0.0002466449,0.9945562,0.0001260534,0.000001772,0.00462927],"study_design_scores_gemma":[0.0001086009,0.00005718089,0.001035673,0.0001223732,0.000003704527,0.000008748404,0.00001029668,0.001762667,0.9964623,0.00005623022,0.0002150695,0.000157093],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9959576,0.003264569,0.00009352133,0.0000050549,0.0003931541,0.0001087133,0.000002550286,0.00006967497,0.0001052163],"genre_scores_gemma":[0.9970657,0.002385409,0.0004351767,0.000008884697,0.00007281814,0.00001523257,4.119051e-7,0.00001488447,0.000001473659],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.004472177,"threshold_uncertainty_score":0.5019196,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3125479845","doi":"10.1155/2021/6678280","title":"Spheroidization and Coarsening of Eutectic Si Particles in Al‐Si‐Based Alloys","year":2021,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":30,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Cégep de Chicoutimi; Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Eutectic system; Alloy; Dissolution; Ostwald ripening; Fusion; Economies of agglomeration; Metallurgy; Chemical engineering; Nanotechnology","retraction":null,"screen_n_in":null,"score":{"opus":0.005560400024530005,"gpt":0.2063620050270705,"spread":0.2008016050025405,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002831221,0.00009698074,0.0001596784,0.00009730455,0.00002424421,0.00005387218,0.00006765041,0.00002568192,0.000006503267],"category_scores_gemma":[0.000140676,0.00009766643,0.000004963827,0.00037619,0.0001111808,0.0005700182,0.00003978789,0.00004650477,3.364102e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003826421,"about_ca_system_score_gemma":0.00002368916,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009575436,"about_ca_topic_score_gemma":0.00003444421,"domain_scores_codex":[0.9992851,0.000009488738,0.0002136681,0.0001660924,0.0001174352,0.000208196],"domain_scores_gemma":[0.9997948,0.00003286231,0.000020269,0.00008661153,0.00003530827,0.00003015404],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002782464,0.000002245335,0.001231309,0.0001355491,8.648095e-7,0.000004926715,0.0002134207,0.1351779,0.8616349,0.00006472116,2.958525e-7,0.001531039],"study_design_scores_gemma":[0.0001785193,0.00001010479,0.004349673,0.00014577,0.000002131226,0.000008774318,0.0001305024,0.07846511,0.9163579,0.00006539017,0.0001698709,0.0001162137],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9946372,0.00325595,0.001740245,0.00001853216,0.0002273813,0.00005612874,0.000001873969,0.00004123912,0.00002146617],"genre_scores_gemma":[0.9903497,0.0005694297,0.009030751,0.0000183889,0.00001065922,0.000007341035,8.456715e-7,0.00001216044,7.65319e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.05671283,"threshold_uncertainty_score":0.3982722,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2017852398","doi":"10.1155/2010/567390","title":"An Improved Model for FE Modeling and Simulation of Closed Cell Al-Alloy Foams","year":2010,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Cellular and Composite Structures","field":"Engineering","cited_by":30,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Kongju National University; Korea Institute of Machinery and Materials; University of Alberta","keywords":"Materials science; Alloy; Cruciform; Deformation (meteorology); Metal foam; Composite material; Finite element method; Polyurethane; Constitutive equation; Structural engineering; Aluminium","retraction":null,"screen_n_in":null,"score":{"opus":0.004597036067060675,"gpt":0.2306241829512601,"spread":0.2260271468841994,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002174108,0.00009517917,0.0001259603,0.00009341741,0.00003948105,0.0000496468,0.00009982144,0.0000331447,7.919948e-7],"category_scores_gemma":[0.00001558972,0.0000931536,0.00000808537,0.00008501322,0.000038834,0.0005770912,0.00001885041,0.0000475054,3.246388e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00000934203,"about_ca_system_score_gemma":0.000008507162,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005029871,"about_ca_topic_score_gemma":0.000007552311,"domain_scores_codex":[0.9994351,0.000001623923,0.0001571154,0.0001544879,0.00007912458,0.0001725837],"domain_scores_gemma":[0.9997833,0.00001756918,0.00001651951,0.0001048171,0.00003325916,0.00004448061],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000003217788,0.000001286448,0.00000630319,0.00005293338,2.872766e-7,4.476794e-8,0.00007555952,0.4990462,0.5002804,0.00005091984,2.880712e-8,0.0004828786],"study_design_scores_gemma":[0.000135706,0.00001425953,0.00003557658,0.000009129008,0.000002146112,5.640477e-7,0.00001410841,0.7722299,0.2271412,0.0003207889,0.000008575917,0.00008798461],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8538658,0.0001970526,0.1455314,0.000001493467,0.0002387261,0.0001048354,0.000006235605,0.00003860302,0.00001585174],"genre_scores_gemma":[0.9813993,0.00009318042,0.01845277,0.000004952847,0.00002497222,0.00000892678,0.000002511068,0.0000128363,5.700229e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2731838,"threshold_uncertainty_score":0.3798693,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3175497849","doi":"10.1155/2021/1921603","title":"A Review Study on the Main Sources of Porosity in Al‐Si Cast Alloys","year":2021,"lang":"en","type":"review","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":29,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure; Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Porosity; Ultimate tensile strength; Nucleation; Alloy; Intermetallic; Metallurgy; Precipitation; Composite material; Tensile testing; Lanthanum; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.02014066393542771,"gpt":0.2780219184745715,"spread":0.2578812545391438,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001604339,0.0003566538,0.001267507,0.0002260536,0.00004251958,0.0000744846,0.0005262264,0.00006007022,0.00001543075],"category_scores_gemma":[0.0002561519,0.0002377907,0.00004659944,0.0008297208,0.0001565614,0.000299222,0.0001783558,0.0002354342,0.000002184426],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001449219,"about_ca_system_score_gemma":0.00006765015,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001594217,"about_ca_topic_score_gemma":0.00002158601,"domain_scores_codex":[0.9982481,0.00007104631,0.0006729563,0.0003677138,0.0002786789,0.0003615126],"domain_scores_gemma":[0.9993455,0.0001201813,0.00009383543,0.0003711737,0.00003158081,0.00003777607],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.00001324782,0.0002251613,0.000252559,0.3077436,0.0001820931,0.0004025849,0.0045954,0.02070644,0.0571721,0.0006768676,0.0002212779,0.6078086],"study_design_scores_gemma":[0.0003185211,0.0001577022,0.0002693621,0.2428244,0.0001996238,0.0002346902,0.000732794,0.0001947294,0.005469556,0.00002050474,0.7480079,0.001570207],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.03003372,0.9687217,0.000006250167,0.000008491557,0.0004386192,0.0007094463,0.00001763884,0.00003316567,0.00003092227],"genre_scores_gemma":[0.01346393,0.9861824,0.0001344847,0.0000354182,0.00002806304,0.0001155986,0.000002272035,0.00003527206,0.000002580018],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.7477866,"threshold_uncertainty_score":0.9696824,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2804060931","doi":"10.1155/2018/3849867","title":"Sodium Dodecyl Sulfate‐Modified Fe<sub>2</sub>O<sub>3</sub>/Molecular Sieves for Removal of Rhodamine B Dyes","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Adsorption and biosorption for pollutant removal","field":"Environmental Science","cited_by":29,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Western University","funders":"","keywords":"Materials science; Molecular sieve; Rhodamine B; Sodium dodecyl sulfate; Rhodamine; Sulfate; Sodium; Polyoxometalate; Nuclear chemistry; Analytical Chemistry (journal); Inorganic chemistry; Fluorescence; Chromatography; Organic chemistry; Catalysis; Optics; Chemistry; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.006391371776985104,"gpt":0.2228109771601109,"spread":0.2164196053831258,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008618071,0.000225108,0.000283757,0.0001535881,0.000137565,0.0000761074,0.0003212882,0.00007676688,0.00002190276],"category_scores_gemma":[0.0001766569,0.0002020179,0.000041063,0.0005439052,0.0008382753,0.0008523768,0.0001863042,0.00005968591,0.00002413503],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009664259,"about_ca_system_score_gemma":0.00002309191,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009139827,"about_ca_topic_score_gemma":0.00001873619,"domain_scores_codex":[0.9981455,0.00001988577,0.0004118668,0.0004838053,0.0004263582,0.0005126184],"domain_scores_gemma":[0.9994449,0.00003909165,0.0001317895,0.0002190537,0.00004209444,0.0001230667],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004967779,0.00002214211,0.00005263513,0.0000437242,0.000002303429,0.000006926512,0.00008738932,0.001287606,0.9907208,0.0006753932,0.000006803175,0.0070446],"study_design_scores_gemma":[0.0003862325,0.0001255318,0.002333508,0.00005835495,0.00000683354,0.0000514416,0.00004328167,0.003580959,0.9915776,0.0005500012,0.001020467,0.0002658036],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9925151,0.0001526915,0.006072387,0.00006785595,0.0006295118,0.0002715902,0.00002888945,0.00005657018,0.0002053459],"genre_scores_gemma":[0.9952895,0.0003688747,0.004138689,0.00006166234,0.00009063748,0.00001913041,0.000004673472,0.00001849757,0.000008350179],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.006778797,"threshold_uncertainty_score":0.8238049,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2952595593","doi":"10.1155/2019/4149708","title":"Development of FRC Materials with Recycled Glass Fibers Recovered from Industrial GFRP-Acrylic Waste","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Innovative concrete reinforcement materials","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Victoria","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Composite material; Flexural strength; Glass fiber; Ultimate tensile strength; Glass recycling; Curing (chemistry); Compressive strength; Durability; Fiber; Slump; Raw material","retraction":null,"screen_n_in":null,"score":{"opus":0.009571528715752077,"gpt":0.2061744716996305,"spread":0.1966029429838785,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007585851,0.000266948,0.0005008139,0.0002764428,0.0000426696,0.0001161738,0.0002783722,0.00008742377,0.0002032154],"category_scores_gemma":[0.00005623815,0.0002381942,0.000009801708,0.0005160717,0.00009731905,0.001138932,0.00009978245,0.00006341694,0.00001060592],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001526996,"about_ca_system_score_gemma":0.00007986392,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002230707,"about_ca_topic_score_gemma":0.000004174911,"domain_scores_codex":[0.9981986,0.00001545162,0.0006486673,0.0003210482,0.000367661,0.000448552],"domain_scores_gemma":[0.9994573,0.00005117034,0.0001254776,0.0002311168,0.00007644878,0.00005847505],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000610669,0.000002356278,0.00009408273,0.0001366,0.00001400982,0.000001744625,0.0002873552,0.006870901,0.990918,0.0002753712,0.000002668427,0.001335842],"study_design_scores_gemma":[0.0007148621,0.00004296265,0.00019597,0.0004394206,0.000004974057,0.000001774387,0.0001606315,0.0008006033,0.9946584,0.00002670524,0.002629766,0.0003239971],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9967098,0.0001078573,0.0006969199,0.000003747921,0.001698605,0.0002837281,0.00006256886,0.00008672913,0.0003500487],"genre_scores_gemma":[0.9911318,0.0001524338,0.008498857,0.00001040085,0.00009268485,0.00004033748,0.00003072216,0.00003381484,0.000008961811],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.007801936,"threshold_uncertainty_score":0.9713278,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2012612158","doi":"10.1155/2011/179023","title":"Modifications Caused by Enzyme-Retting and Their Effect on Composite Performance","year":2011,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Natural Fiber Reinforced Composites","field":"Materials Science","cited_by":26,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":true},"ca_institutions":"Orthopaedic Innovation Centre; National Research Council Canada; Biotechnology Research Institute","funders":"Agriculture and Agri-Food Canada; Agricultural Research Service; Clemson University; North Dakota State University; U.S. Department of Agriculture","keywords":"Retting; Materials science; Composite number; Composite material; Ultimate tensile strength; Fiber; Wax; Thermosetting polymer; Straw; Epoxy; Pulp and paper industry; Agronomy; Biology","retraction":null,"screen_n_in":null,"score":{"opus":0.007805962547534977,"gpt":0.2167313360940811,"spread":0.2089253735465461,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006617074,0.0001748165,0.0001957865,0.000141919,0.0001871791,0.0001303984,0.0002605084,0.00003382993,0.0000130147],"category_scores_gemma":[0.00006093349,0.0001331659,0.000007951931,0.0002591572,0.0002069401,0.001176667,0.00009818857,0.00007514689,0.000009410212],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000416156,"about_ca_system_score_gemma":0.00001037641,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001463775,"about_ca_topic_score_gemma":6.06374e-7,"domain_scores_codex":[0.9989215,0.00001939257,0.000211123,0.0003317671,0.0001674601,0.0003487321],"domain_scores_gemma":[0.9995565,0.00009874711,0.00005793448,0.000178192,0.00003186043,0.00007674041],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001415574,0.000003895986,0.0001635069,0.000053334,6.471806e-7,6.98267e-7,0.0003017375,0.0007567703,0.9971558,0.0003140381,0.000001394355,0.001233954],"study_design_scores_gemma":[0.0001493108,0.000122976,0.001736236,0.0001122622,0.000002089834,0.000007363569,0.00001506403,0.003375859,0.9941748,0.00003872119,0.00009433034,0.0001709771],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.998177,0.0007493645,0.0002209061,0.00001260831,0.0003102371,0.0001649146,0.000009595115,0.00007909082,0.0002762796],"genre_scores_gemma":[0.9984419,0.000160257,0.001294669,0.00003246617,0.00002234708,0.00002936772,0.00000176481,0.00001053586,0.000006724793],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.002981059,"threshold_uncertainty_score":0.5430347,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2999658462","doi":"10.1155/2020/5828514","title":"Roof Movement and Failure Behavior When Mining Extra‐Thick Coal Seams Using Upward Slicing Longwall‐Roadway Cemented Backfill Technology","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Tailings Management and Properties","field":"Engineering","cited_by":26,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of British Columbia","funders":"State Key Laboratory of Coal Resources and Safe Mining; Natural Science Foundation of Heilongjiang Province; China University of Mining and Technology; National Natural Science Foundation of China","keywords":"Roof; Coal mining; Slicing; Longwall mining; Deflection (physics); Mining engineering; Coal; Geology; Geotechnical engineering; Materials science; Structural engineering; Engineering; Mechanical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01310204201372733,"gpt":0.2164247212154276,"spread":0.2033226792017003,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003286667,0.000225073,0.0002620899,0.0002610301,0.0001092275,0.0001802328,0.0002257066,0.00006493206,0.00002444564],"category_scores_gemma":[0.00005626799,0.0002216312,0.00001123768,0.000384091,0.0001395734,0.001046625,0.0002031553,0.0001136126,0.000001808672],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006499209,"about_ca_system_score_gemma":0.00001204964,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001414331,"about_ca_topic_score_gemma":0.00001176677,"domain_scores_codex":[0.9986603,0.00000706618,0.0003048943,0.0003469682,0.0002272279,0.0004535889],"domain_scores_gemma":[0.9996976,0.00001423066,0.00004084857,0.0001208295,0.00003382953,0.00009267905],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000008074002,0.000005375045,0.003093254,0.0003359802,0.00000743429,0.00001487615,0.001033934,0.0848016,0.9061656,0.000170515,0.000006845044,0.004356527],"study_design_scores_gemma":[0.00114136,0.0002247726,0.002288531,0.0007428059,0.00006832113,0.00002118725,0.004028967,0.3781408,0.605202,0.0001603535,0.006728008,0.001252933],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9927891,0.001752021,0.004427105,0.0001438902,0.000332959,0.0002418063,0.000004629607,0.0002459404,0.00006257954],"genre_scores_gemma":[0.985339,0.0004689316,0.01399596,0.00006695925,0.00006276942,0.00003152082,0.000001960421,0.00002779397,0.000005118449],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3009636,"threshold_uncertainty_score":0.9037856,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3034824405","doi":"10.1155/2020/1902567","title":"High Frequency Vibration Fatigue Behavior of Ti6Al4V Fabricated by Wire‐Fed Electron Beam Additive Manufacturing Technology","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Additive Manufacturing Materials and Processes","field":"Engineering","cited_by":23,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University; National Research Council Canada","funders":"IHI","keywords":"Materials science; Fatigue limit; Vibration fatigue; Vibration; Titanium alloy; Reliability (semiconductor); Structural engineering; Cyclic stress; Limiting; Mechanical engineering; Fatigue testing; Composite material; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.005779366981615955,"gpt":0.2132819215914751,"spread":0.2075025546098591,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001446929,0.0002131198,0.0003105786,0.0001961586,0.00005970314,0.00006267054,0.0002385437,0.00007753648,0.00006062471],"category_scores_gemma":[0.00008607573,0.0002125608,0.00001105528,0.0004013054,0.0001525833,0.0009090257,0.00005766451,0.00009999965,0.000002925847],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004941507,"about_ca_system_score_gemma":0.00001922541,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001460317,"about_ca_topic_score_gemma":0.000001504794,"domain_scores_codex":[0.9987974,0.000007118787,0.0003398332,0.0003027631,0.0001908371,0.0003620468],"domain_scores_gemma":[0.9996747,0.00003019612,0.00007205662,0.0001054981,0.00004749186,0.00007004707],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000007632533,0.00000659336,0.00003090761,0.000169665,0.000003510693,0.00000320658,0.00008487412,0.006470648,0.9911209,0.0001632325,0.00000914177,0.001929639],"study_design_scores_gemma":[0.000154598,0.00008046379,0.0007536198,0.00006600073,0.000007491045,0.000003382856,0.00004192404,0.0003322759,0.9979386,0.0001555971,0.0002386465,0.0002274002],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9939556,0.0006644467,0.004462834,0.0000413325,0.000273965,0.0001961149,0.0001141499,0.0002404057,0.0000512029],"genre_scores_gemma":[0.997333,0.0007910846,0.001668747,0.00001827609,0.00005433204,0.00007552998,0.00003218778,0.0000260415,8.337523e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.006817651,"threshold_uncertainty_score":0.8667978,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2742551736","doi":"10.1155/2017/7408641","title":"Effect of Aluminum Addition on the Microstructure, Tensile Properties, and Fractography of Cast Mg-Based Alloys","year":2017,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Magnesium Alloys: Properties and Applications","field":"Materials Science","cited_by":23,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"General Motors of Canada","keywords":"Materials science; Fractography; Ultimate tensile strength; Intermetallic; Ductility (Earth science); Alloy; Microstructure; Brittleness; Metallurgy; Aluminium; Composite material; Phase (matter); Metal","retraction":null,"screen_n_in":null,"score":{"opus":0.009025496700963018,"gpt":0.2236676800548519,"spread":0.2146421833538888,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008496108,0.0001128189,0.0001974494,0.00007407841,0.0002335238,0.0001202589,0.0003105702,0.00002781641,0.00003357944],"category_scores_gemma":[0.0002604945,0.00006635391,0.00001280969,0.00009538277,0.0007287639,0.0003946094,0.00008348955,0.00003841742,8.92381e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000009109244,"about_ca_system_score_gemma":0.00002050451,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0001116295,"about_ca_topic_score_gemma":0.000007852296,"domain_scores_codex":[0.9991884,0.00002288927,0.0001969065,0.0002190497,0.0001910547,0.0001816568],"domain_scores_gemma":[0.9993725,0.0000754483,0.0001423399,0.0003179449,0.00005943244,0.00003226372],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003516961,0.000006214229,0.000242339,0.0001876003,5.571648e-7,3.769466e-7,0.00004629256,0.0003755674,0.9981019,0.0004139864,0.000003252869,0.0005867628],"study_design_scores_gemma":[0.0001567934,0.0001579996,0.00565537,0.0001517663,0.000005199608,0.000002453107,0.00002416006,0.0008543504,0.9924777,0.00003210038,0.0003973632,0.00008470616],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9989951,0.0003085499,0.00003029972,0.00008075112,0.0001889761,0.0002434782,0.00003861646,0.00001130448,0.0001029197],"genre_scores_gemma":[0.9993227,0.00009859046,0.0004717113,0.00002266847,0.00002331073,0.00005035216,0.000001148718,0.000006485855,0.000003050488],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.005624142,"threshold_uncertainty_score":0.2705834,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2940305440","doi":"10.1155/2019/5370360","title":"The Effect of Calcium Formate, Sodium Sulfate, and Cement Clinker on Engineering Properties of Fly Ash-Based Cemented Tailings Backfill","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Tailings Management and Properties","field":"Engineering","cited_by":21,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Ottawa","funders":"","keywords":"Fly ash; Materials science; Cement; Slump; Ettringite; Tailings; Compressive strength; Clinker (cement); Leaching (pedology); Calcium hydroxide; Metallurgy; Sulfate; Sodium hydroxide; Waste management; Composite material; Chemical engineering; Environmental science; Portland cement","retraction":null,"screen_n_in":null,"score":{"opus":0.005818098449769368,"gpt":0.1969702748254547,"spread":0.1911521763756853,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009269785,0.0002037192,0.0002886654,0.0002008412,0.00005397621,0.0000728167,0.0001799533,0.00003640915,0.000004730427],"category_scores_gemma":[0.00007660886,0.000135912,0.00001889948,0.0002543971,0.0001254878,0.0005429984,0.000079196,0.00007657569,0.000002169141],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003813858,"about_ca_system_score_gemma":0.000009426039,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009786676,"about_ca_topic_score_gemma":0.000001531476,"domain_scores_codex":[0.9988103,0.00001145057,0.0003763226,0.0001873804,0.0002669388,0.000347605],"domain_scores_gemma":[0.9996022,0.00007575809,0.00006091676,0.0001792122,0.00004300237,0.00003891993],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006751714,0.000003523692,0.0006824218,0.001413541,0.000007484729,4.400563e-7,0.00009416389,0.141416,0.8554274,0.000110118,0.000001716044,0.0007756717],"study_design_scores_gemma":[0.0004591343,0.0002307736,0.0004727945,0.0004348103,0.000007532527,6.211621e-7,0.00005521383,0.07559699,0.9215161,0.000002919655,0.00105773,0.0001653627],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9968098,0.001761705,0.0001887701,0.00001369797,0.000629704,0.000397932,0.000003187217,0.00006618311,0.0001290106],"genre_scores_gemma":[0.9991496,0.0005021569,0.000251228,0.000005368926,0.00001774317,0.00003894242,0.00000120418,0.00001981968,0.00001395382],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.06608866,"threshold_uncertainty_score":0.5542333,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3042814497","doi":"10.1155/2020/6483803","title":"Biomineralization Performance of <i>Bacillus sphaericus</i> under the Action of <i>Bacillus mucilaginosus</i>","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Microbial Applications in Construction Materials","field":"Environmental Science","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"National College Students Innovation and Entrepreneurship Training Program; Binzhou University; National Natural Science Foundation of China","keywords":"Bacillus sphaericus; Biomineralization; Materials science; Action (physics); Bacillus (shape); Microbiology; Biology; Bacillales; Bacteria; Bacillus subtilis; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.009513277509012867,"gpt":0.2190368866576471,"spread":0.2095236091486342,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004249928,0.00009632636,0.0001529704,0.00004285021,0.00007070907,0.00002608908,0.0002528402,0.00002656616,0.0001450353],"category_scores_gemma":[0.00005269754,0.00007540423,0.000009933158,0.0007233237,0.0005300496,0.0006856861,0.0001439613,0.00003254172,0.00000782217],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004959947,"about_ca_system_score_gemma":0.00001461043,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003513406,"about_ca_topic_score_gemma":0.000004073562,"domain_scores_codex":[0.9990517,0.00001461384,0.0003242091,0.000219244,0.0002300897,0.0001601726],"domain_scores_gemma":[0.9996301,0.00002362176,0.0001369007,0.0001454364,0.00002667782,0.00003729436],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001069574,0.00000496793,0.0006461298,0.00005919295,7.324603e-7,7.687449e-8,0.0001130012,0.04199394,0.9549455,0.0003233613,0.00001037722,0.001891995],"study_design_scores_gemma":[0.0001361122,0.00003431601,0.003199366,0.00002350264,0.000003991455,0.00000649737,0.0000883074,0.002674792,0.9905625,0.0000538787,0.003117578,0.00009914123],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9970779,0.00007391503,0.00207865,0.0001535618,0.0002771268,0.0001601469,0.0000106277,0.00001896797,0.0001490345],"genre_scores_gemma":[0.9970618,0.0005304379,0.00226779,0.00008674565,0.00002919855,0.0000133489,0.000001562301,0.000005983745,0.000003102854],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03931915,"threshold_uncertainty_score":0.3074895,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2421917278","doi":"10.1155/2016/7958152","title":"Development of a Stable TiO<sub>2</sub>Nanocomposite Self-Cleaning Coating for Outdoor Applications","year":2016,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Surface Modification and Superhydrophobicity","field":"Materials Science","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"Hydro-Québec; Université du Québec à Chicoutimi","keywords":"Materials science; Coating; Nanocomposite; Immersion (mathematics); Scanning electron microscope; Contact angle; Composite material; Aqueous solution; Surface roughness; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.009573467706340228,"gpt":0.2349441265573108,"spread":0.2253706588509706,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.00114002,0.0001100366,0.0001831992,0.0001211868,0.0001745352,0.00006211621,0.0002108942,0.00002719938,0.000007503689],"category_scores_gemma":[0.0000924939,0.0000864516,0.00001067331,0.0002495794,0.0001049581,0.0007229484,0.00007367835,0.00001815997,0.000008693266],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009192477,"about_ca_system_score_gemma":0.00008570886,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002057217,"about_ca_topic_score_gemma":0.000003756129,"domain_scores_codex":[0.9987994,0.00001006677,0.0003691148,0.0003066521,0.0002101074,0.000304629],"domain_scores_gemma":[0.9994912,0.00009796851,0.00009255251,0.0001483854,0.0001105864,0.00005929267],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000006858834,0.0000149625,0.00008579456,0.0000834595,7.661982e-7,1.058477e-7,0.0004004306,0.0005390023,0.9945936,0.0007431012,3.724917e-7,0.003531503],"study_design_scores_gemma":[0.0002130254,0.00001110351,0.000542554,0.00009496255,0.000002252089,0.000001401042,0.00008245097,0.0005561084,0.9973794,0.00008576336,0.0008982279,0.0001327947],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9494984,0.0001251879,0.04975951,0.00002061374,0.0001749035,0.0003166234,0.00001278534,0.00006739988,0.00002453362],"genre_scores_gemma":[0.9225137,0.00007836905,0.07717986,0.00001039481,0.00002078667,0.0001830009,0.000001030745,0.00000956798,0.000003293322],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.02742035,"threshold_uncertainty_score":0.3525394,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3011091968","doi":"10.1155/2020/4381495","title":"Evaluating the Energy Efficiency of PCM‐Integrated Lightweight Steel‐Framed Building in Eight Different Cities of Warm Summer Humid Continental Climate","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Phase Change Materials Research","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"","funders":"Nazarbayev University; Oak Ridge Associated Universities","keywords":"Volume (thermodynamics); Climate zones; Environmental science; Materials science; Fossil fuel; Energy consumption; Thermal energy storage; Phase-change material; Efficient energy use; Climate change; Thermal; Meteorology; Climatology; Waste management; Engineering; Geography; Geology; Thermodynamics","retraction":null,"screen_n_in":null,"score":{"opus":0.03466499810409245,"gpt":0.3116544164154085,"spread":0.276989418311316,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009430016,0.0002130812,0.0004450078,0.000277908,0.00005203953,0.00006993431,0.0004222491,0.00004712835,0.00003516296],"category_scores_gemma":[0.0002610416,0.000155355,0.00002264526,0.0007444341,0.0002549409,0.0004593346,0.0001804417,0.000104968,5.154503e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007902046,"about_ca_system_score_gemma":0.00002617564,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003848161,"about_ca_topic_score_gemma":0.00001104096,"domain_scores_codex":[0.9981067,0.00004758611,0.0005823269,0.0002711634,0.0004716432,0.000520533],"domain_scores_gemma":[0.9994652,0.0001489949,0.00007896993,0.0001608343,0.00007269036,0.00007331403],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000298088,0.00001766429,0.0003440001,0.0004348216,0.000003587693,0.000003560277,0.0007477962,0.01873754,0.9783964,0.0006052055,7.376663e-7,0.0006788434],"study_design_scores_gemma":[0.00034059,0.0001017784,0.000620598,0.0003109948,0.000004036773,0.00000208547,0.0002538063,0.1078102,0.8903101,0.00003566317,0.00005798983,0.0001521553],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9966606,0.001919613,0.0006183953,0.00003081371,0.0004491588,0.0001777673,0.0000427796,0.00004575708,0.000055078],"genre_scores_gemma":[0.997683,0.001648931,0.0005298433,0.00001139416,0.00005573711,0.00004275161,0.000004698327,0.00002284957,8.102881e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.08907266,"threshold_uncertainty_score":0.6335195,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2615162061","doi":"10.1155/2017/4712946","title":"Effect of Rare Earth Metals, Sr, and Ti Addition on the Microstructural Characterization of A413.1 Alloy","year":2017,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Eutectic system; Alloy; Lanthanum; Intermetallic; Cerium; Phase (matter); Rare earth; Metallurgy; Microstructure; Electron microprobe; Analytical Chemistry (journal); Inorganic chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.004347759879073802,"gpt":0.2043920508680228,"spread":0.200044290988949,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003919279,0.0001169702,0.0001913389,0.00007258692,0.00009265231,0.00008259343,0.000189436,0.00002875577,0.0000107237],"category_scores_gemma":[0.0001502225,0.00007811691,0.00000946924,0.00006296802,0.0002840045,0.0007369426,0.00005947106,0.0000459269,4.278117e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001135223,"about_ca_system_score_gemma":0.000005381124,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003879165,"about_ca_topic_score_gemma":0.000001992083,"domain_scores_codex":[0.9994227,0.00001272339,0.0001683976,0.0001261921,0.000124209,0.0001458133],"domain_scores_gemma":[0.9996617,0.00004093826,0.00006871767,0.0001807151,0.00002778423,0.00002014411],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001408149,6.304827e-7,0.0001328632,0.0002066578,0.000002818984,4.281297e-7,0.000129031,0.0009527559,0.9961084,0.0001031158,3.45434e-7,0.002348838],"study_design_scores_gemma":[0.0001177909,0.00005886503,0.02670322,0.0001460605,0.000004878403,0.000005867356,0.000007992626,0.001321416,0.9714195,0.00001464787,0.0001173942,0.00008238749],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9990104,0.0003316508,0.00002907755,0.0000107374,0.0003979644,0.0001414704,0.00003389327,0.00001961067,0.00002513051],"genre_scores_gemma":[0.9991937,0.0005608665,0.0001877405,0.000003724476,0.00002737668,0.000009719547,0.000003956433,0.00001025074,0.000002704027],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.02657035,"threshold_uncertainty_score":0.3185515,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2022489169","doi":"10.1155/2009/868917","title":"Process, Structure, and Properties of Electrospun Carbon Nanotube‐Reinforced Nanocomposite Yarns","year":2009,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Electrospun Nanofibers in Biomedical Applications","field":"Materials Science","cited_by":17,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of British Columbia","funders":"","keywords":"Materials science; Polyacrylonitrile; Carbon nanotube; Electrospinning; Nanocomposite; Composite material; Polymer; Dispersion (optics)","retraction":null,"screen_n_in":null,"score":{"opus":0.003175058798527482,"gpt":0.215525420132325,"spread":0.2123503613337975,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003902301,0.0001504469,0.0002449176,0.0001182234,0.00009056828,0.00007195131,0.0002709119,0.00004902885,0.000006029429],"category_scores_gemma":[0.00005601349,0.0001217797,0.00000707893,0.0005499372,0.0004108555,0.0006361676,0.00005070478,0.00006710043,4.004009e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000417904,"about_ca_system_score_gemma":0.0000624346,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001549138,"about_ca_topic_score_gemma":0.00000201582,"domain_scores_codex":[0.9986203,0.000008809958,0.0003143169,0.0003302043,0.0003312051,0.0003951518],"domain_scores_gemma":[0.9995846,0.00001568269,0.00008596997,0.0001574311,0.00008086645,0.00007550712],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001360575,0.000005682071,0.00005709211,0.00008282062,5.329549e-7,5.053207e-7,0.0001716401,0.0002429066,0.9972373,0.001511075,2.395936e-7,0.0006766428],"study_design_scores_gemma":[0.0001500455,0.00009486413,0.0008724658,0.0001332184,0.000003764317,0.00001493669,0.00001364533,0.0007546025,0.9969932,0.0007756372,0.00004165895,0.0001519016],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9975034,0.001680943,0.000282286,0.00009304092,0.0001253997,0.0002136807,0.000005154906,0.0000511521,0.00004495527],"genre_scores_gemma":[0.9937991,0.0004407332,0.005652228,0.00004541247,0.00003054776,0.00002009092,9.884623e-7,0.000007067209,0.000003773308],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.005369943,"threshold_uncertainty_score":0.4966033,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3115415018","doi":"10.1155/2020/6666548","title":"Analytical Assessment of Internal Stress in Cemented Paste Backfill","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Tailings Management and Properties","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Lakehead University","funders":"Education Department of Shaanxi Province; Natural Sciences and Engineering Research Council of Canada; Natural Science Foundation of Shaanxi Province; China Postdoctoral Science Foundation","keywords":"Materials science; Stress (linguistics); Internal stress; Sensitivity (control systems); Stress field; Geotechnical engineering; Composite material; Structural engineering; Finite element method; Geology; Engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.0108935144591047,"gpt":0.2454858317373233,"spread":0.2345923172782186,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002425399,0.00008684309,0.0001586267,0.0001367408,0.000010058,0.00004077507,0.0001556789,0.00001483565,0.0000238702],"category_scores_gemma":[0.00004045388,0.00007976966,0.00000703554,0.0003304374,0.00005768476,0.0005319819,0.00007425783,0.00005534042,8.389205e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003165087,"about_ca_system_score_gemma":0.000007357259,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007637085,"about_ca_topic_score_gemma":0.000004625984,"domain_scores_codex":[0.9992768,0.000004780237,0.0002317534,0.0001362603,0.000159274,0.0001911341],"domain_scores_gemma":[0.9998538,0.0000135415,0.00001836639,0.00005724379,0.00001572543,0.00004134085],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00001282854,0.000011641,0.02178204,0.0006959186,0.000005907853,0.000009669174,0.0004300474,0.5024145,0.4705147,0.00145727,0.000005046154,0.002660334],"study_design_scores_gemma":[0.0004050391,0.00007301196,0.01839566,0.0003123492,0.000004908254,7.304299e-7,0.000326322,0.8244077,0.1545791,0.00003283539,0.001229913,0.0002324583],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9967605,0.0003210674,0.001718501,0.00003357493,0.000219044,0.00007383183,0.000004290933,0.00003834663,0.0008308572],"genre_scores_gemma":[0.9984113,0.0003626686,0.00116746,0.00001692292,0.00002582859,0.000006248537,7.897012e-7,0.000006902409,0.000001867533],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3219931,"threshold_uncertainty_score":0.3252912,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2112872989","doi":"10.1155/2013/646343","title":"Deacidification of Soybean Oil Combining Solvent Extraction and Membrane Technology","year":2013,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Membrane Separation Technologies","field":"Environmental Science","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"","funders":"Agencia Nacional de Promoción Científica y Tecnológica; Consejo Nacional de Investigaciones Científicas y Técnicas","keywords":"Nanofiltration; Extraction (chemistry); Soybean oil; Solvent; Chromatography; Materials science; Ethanol; Permeation; Membrane; Membrane technology; Chemistry; Organic chemistry; Food science; Biochemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.006332213645772907,"gpt":0.2325975691664337,"spread":0.2262653555206608,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003346206,0.00006735345,0.0001029229,0.0001456099,0.00005215618,0.00003063156,0.0001274753,0.00003833937,0.000064129],"category_scores_gemma":[0.0001308092,0.00006275668,0.000003214941,0.0003593335,0.0003625673,0.001071035,0.0000943999,0.00004103053,0.000009541158],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003544969,"about_ca_system_score_gemma":0.000004035667,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00003808557,"about_ca_topic_score_gemma":0.000004958446,"domain_scores_codex":[0.9993336,0.000004616387,0.0001771982,0.000190662,0.0001389909,0.0001549746],"domain_scores_gemma":[0.9997708,0.00002011913,0.00006187583,0.0001136472,0.00001115389,0.00002243601],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000001006842,0.000005284798,0.0008117612,0.00002464537,2.722456e-7,2.055589e-7,0.00005791656,0.001193717,0.9835848,0.0007124114,7.083029e-7,0.01360733],"study_design_scores_gemma":[0.00008200903,0.00002187804,0.006077133,0.00002769865,0.000001090645,0.000007370139,0.0001998224,0.003215124,0.9894605,0.0006733902,0.0001569061,0.00007709869],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9987014,0.0001838423,0.0004569528,0.0001088975,0.0001022184,0.00006561204,4.200826e-7,0.0000556199,0.0003250372],"genre_scores_gemma":[0.9930852,0.000639224,0.006223419,0.000005903011,0.000003485342,0.00003071237,4.002083e-7,0.000003528321,0.000008114615],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01353023,"threshold_uncertainty_score":0.2559143,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2904989615","doi":"10.1155/2018/8951495","title":"Transient Dynamics of Stimulated Raman Scattering in Gas‐Filled Hollow‐Core Photonic Crystal Fibers","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Photonic Crystal and Fiber Optics","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Dalhousie University","funders":"","keywords":"Materials science; Transient (computer programming); Raman scattering; Photonic-crystal fiber; Core (optical fiber); Scattering; Raman spectroscopy; Fiber; Optics; Optical fiber; Physics; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.005630629972670827,"gpt":0.218009239624514,"spread":0.2123786096518432,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004188928,0.0001834139,0.0002921745,0.0003202871,0.00003895074,0.00004228678,0.0002234223,0.00005492544,0.00002363813],"category_scores_gemma":[0.00003148045,0.0001868547,0.00001824393,0.0006893987,0.0002748895,0.0005515363,0.00005808377,0.00009335967,0.000001284644],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000163282,"about_ca_system_score_gemma":0.00002444396,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001581313,"about_ca_topic_score_gemma":0.00008170638,"domain_scores_codex":[0.9987001,0.00000454428,0.0003833262,0.0002510302,0.0002100185,0.0004510215],"domain_scores_gemma":[0.9996579,0.00002621802,0.00003201648,0.0001731379,0.00003996729,0.0000707142],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00001588995,0.00001004261,0.0001626194,0.0002095222,0.000002862394,0.000006939517,0.000822635,0.1401716,0.857754,0.00008715848,4.827932e-7,0.0007562621],"study_design_scores_gemma":[0.0007604632,0.0001059861,0.002671993,0.0004745517,0.000006712609,0.00002035891,0.0003433891,0.7929969,0.2018549,0.0001792465,0.0001819766,0.0004034996],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9978198,0.0003360088,0.0007123325,0.000007421149,0.0006376139,0.0001617881,0.00001875251,0.00007842208,0.0002278175],"genre_scores_gemma":[0.9978826,0.0004718993,0.001574196,0.000005684185,0.00002423193,0.00001309784,0.000004068131,0.00002192668,0.000002315537],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.655899,"threshold_uncertainty_score":0.7619712,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2742417094","doi":"10.1155/2017/2748070","title":"Optimization of Alumina Slurry for Oxide-Oxide Ceramic Composites Manufactured by Injection Molding","year":2017,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal; Natural Sciences and Engineering Research Council of Canada","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Suspension (topology); Composite material; Slurry; Rheology; Ceramic; Molding (decorative); Oxide; Viscosity; Newtonian fluid; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.006580774112851724,"gpt":0.2283348819765955,"spread":0.2217541078637437,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003150664,0.000109109,0.0001567878,0.000125588,0.0002256875,0.0001602121,0.0001706346,0.00003911342,0.000004053574],"category_scores_gemma":[0.00009012507,0.0001058615,0.00001073928,0.00007652152,0.00009555485,0.001218347,0.0000313722,0.00003914651,2.076269e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004611598,"about_ca_system_score_gemma":0.000008153936,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000344048,"about_ca_topic_score_gemma":0.000002602567,"domain_scores_codex":[0.9993438,0.000003028275,0.0001939806,0.0001532546,0.0001103752,0.0001956152],"domain_scores_gemma":[0.9997169,0.00002043985,0.00006044064,0.0001233365,0.00005239013,0.00002651137],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000005467391,0.000001554257,0.00008264405,0.0001562851,0.000001259666,8.698293e-8,0.00005333388,0.5497986,0.4491882,0.00005634218,0.000003837411,0.0006523825],"study_design_scores_gemma":[0.0001409347,0.00002584296,0.0006457976,0.0001144807,0.000003721889,0.000003639866,0.00003895911,0.2252966,0.7732368,0.00006286574,0.0002985538,0.0001318394],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9588245,0.0008773803,0.03943663,0.000009387623,0.0005862347,0.0001279963,0.000011111,0.00006619801,0.00006056026],"genre_scores_gemma":[0.9895359,0.0006362636,0.009742741,0.000004950112,0.0000258329,0.00002917201,0.000003100341,0.00001515507,0.000006867856],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3245021,"threshold_uncertainty_score":0.4316907,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2894695206","doi":"10.1155/2018/5715819","title":"Mechanical Performance of Zr‐Containing 354‐Type Al‐Si‐Cu‐Mg Cast Alloy: Role of Additions and Heat Treatment","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Alloy; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.005931862970020201,"gpt":0.2116943972444967,"spread":0.2057625342744764,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001934888,0.0001385573,0.0002350893,0.0001249189,0.00005553146,0.00002511583,0.0001129297,0.00003401463,0.00002221059],"category_scores_gemma":[0.00003788682,0.000119545,0.000008795981,0.000216363,0.0002682961,0.0005718549,0.00005590489,0.00003700594,0.000001161131],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005797315,"about_ca_system_score_gemma":0.00002250146,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0000295508,"about_ca_topic_score_gemma":0.00002089148,"domain_scores_codex":[0.999206,0.000005270435,0.0002447957,0.0001749083,0.000124048,0.0002449881],"domain_scores_gemma":[0.999718,0.00002102254,0.00002439422,0.0001261085,0.0000628539,0.00004769391],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001844125,0.000004062003,0.000295485,0.00007117363,0.000004937915,5.885947e-7,0.0005717959,0.005346787,0.9916548,0.0001502832,7.112069e-7,0.001881],"study_design_scores_gemma":[0.0001920752,0.0003503393,0.002119588,0.0001633487,0.000007587749,0.00002330321,0.0001758959,0.03435032,0.9616318,0.00003457433,0.0008000371,0.0001510822],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9977753,0.00161217,0.00005365872,0.000006298595,0.0003332832,0.00009268847,0.00001530156,0.00004325332,0.00006808428],"genre_scores_gemma":[0.99527,0.001370882,0.003279842,0.00000617937,0.00004363415,0.0000110081,0.000001722613,0.00001496112,0.000001845396],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.03002288,"threshold_uncertainty_score":0.4874902,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2167242453","doi":"10.1155/2013/198434","title":"Cutting NiTi with Femtosecond Laser","year":2013,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Laser Material Processing Techniques","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Waterloo","funders":"","keywords":"Materials science; Nickel titanium; Femtosecond; Laser; Machining; Layer (electronics); Shape-memory alloy; Thermal; Laser ablation; Ablation; Composite material; Optoelectronics; Metallurgy; Optics","retraction":null,"screen_n_in":null,"score":{"opus":0.003110250630498924,"gpt":0.1930769263767379,"spread":0.189966675746239,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002686158,0.0001465673,0.0001557803,0.0001567864,0.00005573891,0.000278401,0.0001828465,0.0000311739,0.00005821646],"category_scores_gemma":[0.00003769307,0.0001225611,0.0000041883,0.0003047588,0.0001178584,0.002204548,0.00004951888,0.00005938527,0.00001290115],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004913132,"about_ca_system_score_gemma":0.00001369971,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001738107,"about_ca_topic_score_gemma":0.000002869707,"domain_scores_codex":[0.9991147,0.000003800052,0.0001742733,0.0001942277,0.0001571631,0.0003558496],"domain_scores_gemma":[0.999728,0.00001853724,0.00001930084,0.0001263895,0.00004559803,0.00006220715],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002125948,0.000003489508,0.0002085216,0.0002528782,0.000001535078,0.00000493181,0.0001122708,0.01049191,0.9848502,0.0001882942,0.00001551756,0.003868334],"study_design_scores_gemma":[0.0001419291,0.00002772831,0.001536151,0.0002193949,0.000002124919,0.00001953338,0.00005073689,0.007064217,0.9891432,0.0006016793,0.0009031856,0.0002901355],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9968009,0.0002659679,0.001029251,0.00001500461,0.0002855308,0.0001363187,0.000002339377,0.0004368481,0.001027837],"genre_scores_gemma":[0.9872199,0.0001682864,0.0124365,0.0000240063,0.00004980795,0.00006969125,9.62033e-7,0.00002484911,0.000005955897],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01140725,"threshold_uncertainty_score":0.4997898,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2791963470","doi":"10.1155/2018/9084279","title":"Experiment on Behavior of a New Connector Used in Bamboo (Timber) Frame Structure under Cyclic Loading","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Bamboo properties and applications","field":"Agricultural and Biological Sciences","cited_by":13,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"FPInnovations","funders":"Priority Academic Program Development of Jiangsu Higher Education Institutions; Changzhou Institute of Technology; National Natural Science Foundation of China","keywords":"Materials science; Bamboo; Cable gland; Dissipation; Structural engineering; Joint (building); Composite material; Stiffness; Hysteresis; Connection (principal bundle); Displacement (psychology); Computer science","retraction":null,"screen_n_in":null,"score":{"opus":0.01708325378870083,"gpt":0.2537853040412951,"spread":0.2367020502525942,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001277694,0.00008500737,0.0001295467,0.00002927856,0.00005568476,0.00004187074,0.0001593991,0.00003372587,0.0001190683],"category_scores_gemma":[0.00002446028,0.00003854058,0.00000824262,0.0002988494,0.000120005,0.0002411479,0.00004713333,0.00003842868,0.000002241088],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003054481,"about_ca_system_score_gemma":0.000008137011,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000151541,"about_ca_topic_score_gemma":0.0001191932,"domain_scores_codex":[0.999289,0.000005815165,0.0001641034,0.0002084617,0.0001307516,0.000201808],"domain_scores_gemma":[0.9998174,0.0000298403,0.00003529273,0.00004818196,0.00002005989,0.00004917997],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000005674857,0.00001212048,0.0007893189,0.000003899787,3.090787e-7,2.534032e-7,0.0001363186,0.000248502,0.9959651,0.0007538029,0.000001273728,0.002083411],"study_design_scores_gemma":[0.0001012663,0.0001287532,0.04866191,0.0000742237,0.000001338126,0.000001601413,0.0002777243,0.0001563437,0.9495252,0.0002168233,0.0007366336,0.0001181334],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9993998,0.0001627893,0.00001015933,0.00008796941,0.0001488494,0.0001320165,0.000007300967,0.00001433724,0.00003676745],"genre_scores_gemma":[0.999391,0.00004847693,0.0004039548,0.00004484709,0.00008568363,0.0000175004,0.000001316659,9.479664e-7,0.000006330686],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.04787259,"threshold_uncertainty_score":0.1571639,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2736610802","doi":"10.1155/2017/5086418","title":"Effect of Solidification Rate and Rare Earth Metal Addition on the Microstructural Characteristics and Porosity Formation in A356 Alloy","year":2017,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":13,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Eutectic system; Alloy; Nucleation; Metallurgy; Thermodynamics; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.005451116476029281,"gpt":0.2112216265364714,"spread":0.2057705100604422,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005412142,0.0001058241,0.0001518564,0.00007332081,0.0001148896,0.0001427084,0.0001090582,0.0000282321,0.000002171862],"category_scores_gemma":[0.0001802792,0.00007495571,0.000004934322,0.00004823139,0.0001964697,0.001110453,0.00004867532,0.000057378,2.957547e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002048359,"about_ca_system_score_gemma":0.000003280965,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006739653,"about_ca_topic_score_gemma":0.000007533897,"domain_scores_codex":[0.999484,0.00001753324,0.0001612499,0.0001186714,0.00007717413,0.000141368],"domain_scores_gemma":[0.9997356,0.00004697976,0.00005728497,0.0001243354,0.00001852886,0.00001730131],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001695718,6.087682e-7,0.0003464203,0.0001703842,9.681406e-7,5.781843e-7,0.000231736,0.0005375812,0.9957369,0.00008099111,3.361602e-7,0.002876569],"study_design_scores_gemma":[0.0001531157,0.00003988844,0.1082526,0.0001125515,0.000003313898,0.00001216014,0.00001977358,0.006378238,0.8848673,0.00002865147,0.00004472657,0.00008769412],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9992167,0.0002648774,0.00003322009,0.00001572511,0.0002649083,0.0001571749,0.00002097467,0.00001589166,0.00001057011],"genre_scores_gemma":[0.9991189,0.0006636955,0.0001648844,0.000004929356,0.00002311668,0.00001234471,0.00000451129,0.000006668869,9.09711e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1108695,"threshold_uncertainty_score":0.3056605,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2802876074","doi":"10.1155/2018/3647395","title":"Experimental Investigation on Embedding Strength Perpendicular to Grain of Parallel Strand Bamboo","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Bamboo properties and applications","field":"Agricultural and Biological Sciences","cited_by":13,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"FPInnovations","funders":"Changzhou Institute of Technology; National Natural Science Foundation of China","keywords":"Materials science; Bamboo; Perpendicular; Embedding; Composite material; Geometry; Computer science; Artificial intelligence","retraction":null,"screen_n_in":null,"score":{"opus":0.01501461048845809,"gpt":0.2453938055812901,"spread":0.230379195092832,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002377187,0.00007006785,0.00009122711,0.00002491242,0.00009953618,0.00004459546,0.0001316548,0.00001776772,0.00003973923],"category_scores_gemma":[0.00003148553,0.00003218737,0.000007257598,0.0002500851,0.0001349787,0.0002648651,0.00004128784,0.00002105327,0.000003553567],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00001636732,"about_ca_system_score_gemma":0.000004240047,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004467769,"about_ca_topic_score_gemma":0.00001456143,"domain_scores_codex":[0.9993694,0.000006586834,0.0001334454,0.0001867442,0.0001425082,0.0001612682],"domain_scores_gemma":[0.9998326,0.00001769627,0.00002616144,0.00003673115,0.00002709885,0.0000597347],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00000674946,0.000008645373,0.0001039264,0.000004366689,3.497321e-7,1.557814e-7,0.0001560159,0.0003622212,0.9947091,0.001025802,0.000002920071,0.003619686],"study_design_scores_gemma":[0.00006509723,0.0002413795,0.009492261,0.00006745906,8.916668e-7,0.000001238717,0.0003820302,0.0006437091,0.9869349,0.00008575906,0.001979995,0.0001052861],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9994438,0.0001093263,0.00002847029,0.0001018696,0.00009833459,0.0001128678,0.000006953597,0.00001524742,0.00008308813],"genre_scores_gemma":[0.9983249,0.00003210025,0.001487895,0.00005546118,0.00007018443,0.00002239773,0.000002135127,6.826503e-7,0.000004255011],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.009388335,"threshold_uncertainty_score":0.1312563,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4289335917","doi":"10.1155/2022/3402951","title":"Correlation, Regression Analysis, and Spatial Distribution Mapping of WQI for an Urban Lake in Noyyal River Basin in the Textile Capital of India","year":2022,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Water Quality and Pollution Assessment","field":"Environmental Science","cited_by":12,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"","funders":"","keywords":"Water quality; Environmental science; Eutrophication; Kriging; Hydrology (agriculture); Irrigation; Inverse distance weighting; Spatial distribution; Regression analysis; Multivariate interpolation; Statistics; Mathematics; Nutrient; Geology","retraction":null,"screen_n_in":null,"score":{"opus":0.007575655861227774,"gpt":0.24251314222846,"spread":0.2349374863672322,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001287185,0.00004823827,0.0001104984,0.0001039955,0.0000606885,0.00001297463,0.0001061861,0.00001273373,0.0000327251],"category_scores_gemma":[0.00003373173,0.00003894936,0.000007630233,0.0005307524,0.0001406679,0.0003948984,0.00007290705,0.00003649097,8.254139e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005453626,"about_ca_system_score_gemma":0.000007757342,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.0004872065,"about_ca_topic_score_gemma":0.000416444,"domain_scores_codex":[0.9993117,0.000048126,0.0002036018,0.0001360054,0.0001891266,0.000111426],"domain_scores_gemma":[0.9998104,0.00003600734,0.00006833419,0.00006588794,0.000004377927,0.00001497133],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"observational","study_design_gemma":"observational","study_design_scores_codex":[0.00004432481,0.0000871527,0.5987372,0.00006086693,0.000002748663,0.000001396861,0.01275425,0.241485,0.1434145,0.0007715708,0.000004526229,0.002636544],"study_design_scores_gemma":[0.0001950902,0.00005008634,0.9728457,0.00001660452,0.000003926943,9.047162e-7,0.0006650396,0.02080133,0.004937324,0.000171031,0.0002551164,0.00005779839],"study_design_candidate":"observational","study_design_consensus":"observational","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9940355,0.00003363498,0.005614271,0.00002000127,0.00007842733,0.0001290254,0.0000779043,0.000002110309,0.000009095581],"genre_scores_gemma":[0.9995074,0.0000177706,0.0004095355,0.000007996006,0.000005525378,0.0000219756,0.00002738868,0.000001330021,0.000001135761],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3741086,"threshold_uncertainty_score":0.1588309,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3022852865","doi":"10.1155/2020/4842369","title":"Assessing the Shrinkage Cracking Potential of Concrete Using Ring Specimens with Different Boundary Conditions","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Concrete Properties and Behavior","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Université Laval","funders":"Natural Sciences and Engineering Research Council of Canada; Université Laval","keywords":"Materials science; Shrinkage; Cracking; Ring (chemistry); Composite material; Forensic engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.01508483161973923,"gpt":0.2524058170059519,"spread":0.2373209853862127,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001978015,0.0001396358,0.0002019704,0.0000664709,0.0001377014,0.0002457852,0.0001690112,0.00002160827,0.00002228971],"category_scores_gemma":[0.00002699209,0.00009703667,0.00001358864,0.0002549524,0.0002231125,0.001056308,0.00008155128,0.00009583082,3.581734e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005225405,"about_ca_system_score_gemma":0.00002534776,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007891577,"about_ca_topic_score_gemma":0.000001195096,"domain_scores_codex":[0.999079,0.000008715556,0.0002290099,0.0001746013,0.0002145283,0.000294135],"domain_scores_gemma":[0.999735,0.00002536334,0.00003799433,0.0001027162,0.00003521748,0.00006373954],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002878126,6.185506e-7,0.0003116236,0.00009804977,0.000002896387,0.000007547026,0.0001882843,0.09672206,0.9022418,0.0000406248,2.096199e-7,0.0003834332],"study_design_scores_gemma":[0.000343796,0.00005530349,0.01194794,0.0003874896,0.00003319585,0.00003498308,0.000737397,0.3020472,0.6838683,0.00001152041,0.0002064596,0.0003264251],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9955404,0.0007915491,0.003106864,0.00003331297,0.000288213,0.0001168867,0.000007421092,0.00006418701,0.00005112738],"genre_scores_gemma":[0.9984861,0.0001922222,0.001200646,0.00001706321,0.00007767065,0.000007348077,0.000001104216,0.00001747868,3.55329e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2183735,"threshold_uncertainty_score":0.3957041,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2564406664","doi":"10.1155/2016/7691535","title":"Effect of Sr-P Interaction on the Microstructure and Tensile Properties of A413.0 Type Alloys","year":2016,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Eutectic system; Precipitation; Strontium; Ultimate tensile strength; Dissolution; Microstructure; Silicon; Magnesium; Metallurgy; Chemical engineering","retraction":null,"screen_n_in":null,"score":{"opus":0.004939360120515534,"gpt":0.2024449925115768,"spread":0.1975056323910613,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000340008,0.0001128491,0.0001688127,0.00008489779,0.00002657608,0.00002125253,0.000114419,0.00002852281,0.0000066409],"category_scores_gemma":[0.0001963681,0.00005454805,0.000007029359,0.0001344681,0.0002677431,0.0003794629,0.00004461559,0.00004142264,6.956224e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002564819,"about_ca_system_score_gemma":0.000006947573,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004196403,"about_ca_topic_score_gemma":0.000001602101,"domain_scores_codex":[0.9994476,0.00001285219,0.0001621998,0.0001219181,0.000108764,0.0001466488],"domain_scores_gemma":[0.9997335,0.00006561187,0.00003028245,0.0001118951,0.0000408761,0.00001784774],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003676564,7.427822e-7,0.0001693138,0.0002188813,0.000002732777,2.754689e-7,0.0001929142,0.001214267,0.9955381,0.00006567212,0.000001822087,0.002558484],"study_design_scores_gemma":[0.0001045764,0.0001001167,0.0008855586,0.0003693041,0.000003289159,0.00000952688,0.00002927134,0.0003974977,0.9978243,0.00001762814,0.000183072,0.00007582691],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9976898,0.001620529,0.00001957527,0.00001868132,0.0004816951,0.0001180892,0.00000363312,0.00002523414,0.00002278012],"genre_scores_gemma":[0.9990312,0.0007836843,0.0001388248,0.00000513277,0.00002068396,0.000006352489,1.195354e-7,0.00001093958,0.000003079987],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.002482657,"threshold_uncertainty_score":0.2224405,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2466489180","doi":"10.1155/2016/7078045","title":"Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding","year":2016,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Injection Molding Process and Properties","field":"Engineering","cited_by":12,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal; École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada; Polytechnique Montréal","keywords":"Materials science; Rheology; Composite material; Molding (decorative); Raw material; Shear thinning; Viscosity; Wax; Shear rate; Mixing (physics); Inconel; Shear (geology); Apparent viscosity; Organic chemistry","retraction":null,"screen_n_in":null,"score":{"opus":0.008370658764332708,"gpt":0.2051737400330508,"spread":0.1968030812687181,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005727336,0.0001547055,0.00023103,0.0004319394,0.00005406063,0.00005950659,0.0001635788,0.00005897177,0.00001864042],"category_scores_gemma":[0.0001261729,0.0001138881,0.00001164761,0.0004750926,0.0001214656,0.001562525,0.00005736191,0.00006816114,0.000001297048],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008613614,"about_ca_system_score_gemma":0.00002452302,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004840063,"about_ca_topic_score_gemma":0.00001254391,"domain_scores_codex":[0.9989141,0.00001029229,0.000326882,0.0002173422,0.0002055336,0.000325875],"domain_scores_gemma":[0.999733,0.00002277156,0.00003894831,0.0001141861,0.00005396671,0.00003718243],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000103582,0.000004058534,0.001069845,0.0003940031,0.000002128755,7.757324e-7,0.0004742024,0.194183,0.8015782,0.0001469478,4.929901e-7,0.002135966],"study_design_scores_gemma":[0.0002808879,0.00003144075,0.001505746,0.001390005,0.000003060477,0.000008675784,0.000219334,0.01197037,0.9841374,0.0000867866,0.0001376621,0.0002286388],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9960827,0.002264915,0.0006291058,0.0000141537,0.00071559,0.0001189765,0.000002718099,0.0001002545,0.00007165166],"genre_scores_gemma":[0.9989165,0.0006933854,0.0002736223,0.000005371384,0.00004453606,0.00003703347,1.409228e-7,0.00002031519,0.000009095189],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1825591,"threshold_uncertainty_score":0.4644222,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3006585071","doi":"10.1155/2020/7194214","title":"Through‐Thickness Residual Stresses, Microstructure, and Mechanical Properties of Electron Beam‐Welded CA6NM Martensitic Stainless Steel after Postweld Heat Treatment","year":2020,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Welding Techniques and Residual Stresses","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Hydro-Québec; École de Technologie Supérieure; Cégep de Sorel-Tracy; National Research Council Canada","funders":"National Research Council Canada; Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Residual stress; Microstructure; Martensite; Welding; Electron beam welding; Cathode ray; Metallurgy; Composite material; Electron","retraction":null,"screen_n_in":null,"score":{"opus":0.008734197655671842,"gpt":0.2166095193023903,"spread":0.2078753216467185,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001216877,0.0002104965,0.0003202499,0.00007013392,0.00005216129,0.00008411279,0.0001314266,0.00006923861,0.000004097815],"category_scores_gemma":[0.00004585271,0.0001650479,0.00001267856,0.0002146954,0.0001587016,0.0004925519,0.00007894243,0.00008086319,2.578259e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005397856,"about_ca_system_score_gemma":0.00002616313,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00006815777,"about_ca_topic_score_gemma":0.00001906701,"domain_scores_codex":[0.9989092,0.00001106583,0.0002591953,0.0002804268,0.0001852308,0.0003548844],"domain_scores_gemma":[0.999733,0.00002391731,0.00002062895,0.0001114452,0.0000440303,0.00006701644],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004808477,0.000006610664,0.0000635672,0.000515126,0.000006506109,0.00001364785,0.00036933,0.01382424,0.9847966,0.0001296542,0.000003276687,0.000223291],"study_design_scores_gemma":[0.0002014591,0.0001637872,0.0008155271,0.0002389497,0.00001178415,0.00001897867,0.0001119064,0.0006634717,0.9971819,0.0000844722,0.000305143,0.00020263],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9922211,0.006932057,0.0002171708,0.0001169567,0.0001548485,0.0002020886,0.00002682158,0.0001185685,0.00001044965],"genre_scores_gemma":[0.9939544,0.00411761,0.001777216,0.00003539333,0.00006098984,0.00003259361,0.000001997604,0.00001894172,8.685167e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01316077,"threshold_uncertainty_score":0.6730459,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2958375396","doi":"10.1155/2019/4136295","title":"Investigation on the Properties and Distribution of Air Voids in Porous Asphalt with Relevance to the Pb(II) Removal Performance","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Asphalt Pavement Performance Evaluation","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"","funders":"Priority Academic Program Development of Jiangsu Higher Education Institutions; Natural Science Foundation of Jiangsu Province; Government of Jiangsu Province; Nanjing Forestry University; Natural Science Research of Jiangsu Higher Education Institutions of China; Ministry of Housing and Urban-Rural Development; Tongji University; University of Victoria","keywords":"Materials science; Porosity; Fractal dimension; Void (composites); Volume (thermodynamics); Fractal; Asphalt; Composite material; Thermodynamics; Mathematics; Physics","retraction":null,"screen_n_in":null,"score":{"opus":0.01328039815402012,"gpt":0.2012257534985356,"spread":0.1879453553445155,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009685643,0.0001003408,0.0001079951,0.00007322681,0.00006973765,0.00002451306,0.000131325,0.00001866161,0.000001999712],"category_scores_gemma":[0.00007924491,0.00005936037,0.000002858819,0.0004272192,0.0000982167,0.000826463,0.00003971684,0.00006896217,0.000002252832],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007845784,"about_ca_system_score_gemma":0.00001987448,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007741209,"about_ca_topic_score_gemma":0.00001345947,"domain_scores_codex":[0.9992037,0.000009279783,0.0001888334,0.0001471378,0.0002597422,0.0001912847],"domain_scores_gemma":[0.9997392,0.00003057882,0.00003237509,0.0001404558,0.00003590491,0.00002153087],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001968926,0.000002338091,0.001920463,0.0001527045,9.594496e-7,2.647671e-7,0.0006870646,0.6053045,0.3893311,0.0003132626,0.000001695661,0.002265973],"study_design_scores_gemma":[0.0002569331,0.0002410246,0.08487161,0.0007596487,0.000003035243,0.000007903233,0.0002403915,0.1710642,0.7417585,0.00002942447,0.0005803859,0.0001869621],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9987235,0.0003328075,0.0001464654,0.0001565424,0.0002070976,0.0003624016,0.000002356085,0.00002456133,0.0000442631],"genre_scores_gemma":[0.9991098,0.0004522018,0.0003215191,0.00003314523,0.00002022387,0.00004759908,0.000001725817,0.000007587424,0.000006209834],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4342403,"threshold_uncertainty_score":0.2420646,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2996318317","doi":"10.1155/2019/5693654","title":"Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding","year":2019,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Rock Mechanics and Modeling","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Waterloo","funders":"China Scholarship Council; National Natural Science Foundation of China","keywords":"Materials science; Fracture toughness; Coring; Fracture (geology); Composite material; Brittleness; Transverse plane; Bedding; Toughness; Degree (music); Structural engineering; Metallurgy","retraction":null,"screen_n_in":null,"score":{"opus":0.008577772282765909,"gpt":0.243918780516354,"spread":0.2353410082335881,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006225646,0.00006564084,0.0001119605,0.00005170166,0.00002379784,0.000009603423,0.0001521716,0.00001628921,0.00001060376],"category_scores_gemma":[0.0000197408,0.00003143766,0.000007852615,0.0001238088,0.00004227875,0.0002599945,0.00003208594,0.00003110301,1.597085e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000178254,"about_ca_system_score_gemma":0.00001109206,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007159989,"about_ca_topic_score_gemma":8.524633e-7,"domain_scores_codex":[0.999338,0.000007971121,0.0001500594,0.00008133185,0.0003182921,0.0001043612],"domain_scores_gemma":[0.9997593,0.00002307204,0.00003315626,0.0001200849,0.0000562889,0.000008120526],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000002162828,0.000001594903,0.000035044,0.00003076205,9.346896e-7,1.29077e-8,0.0003667336,0.4727261,0.5265551,0.00021287,3.830006e-8,0.00006857749],"study_design_scores_gemma":[0.00008339687,0.00002042434,0.0004468754,0.0001923784,0.000003278706,5.617246e-7,0.0003239043,0.08126428,0.9175385,0.0000732442,0.000009709358,0.00004345577],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9989479,0.0003682764,0.0002135712,0.000008208273,0.0002649663,0.0001407112,0.000001221853,0.000005651364,0.0000495016],"genre_scores_gemma":[0.9997633,0.00003115538,0.0001764359,0.000004918335,0.000007994202,0.00001036429,1.667802e-7,0.000005302331,3.694424e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3914618,"threshold_uncertainty_score":0.1281991,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2793667482","doi":"10.1155/2018/7607465","title":"Rare Earth Metal‐Based Intermetallics Formation in Al–Cu–Mg and Al–Si–Cu–Mg Alloys: A Metallographic Study","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":11,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"","keywords":"Materials science; Intermetallic; Metallurgy; Rare earth; Metal; Aluminium; Alloy","retraction":null,"screen_n_in":null,"score":{"opus":0.008425281473532782,"gpt":0.2267450131466919,"spread":0.2183197316731592,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0008640729,0.0002847218,0.0003690729,0.0005890082,0.00008909826,0.0002151222,0.0002847194,0.0000502997,0.00001625174],"category_scores_gemma":[0.000111444,0.000251955,0.00001954663,0.0007234602,0.0003368104,0.002283325,0.0001260735,0.0001275701,0.000003606231],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000572801,"about_ca_system_score_gemma":0.0000169389,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002449886,"about_ca_topic_score_gemma":0.0003088965,"domain_scores_codex":[0.998409,0.00002923797,0.0004349478,0.0003735227,0.0002819618,0.0004713723],"domain_scores_gemma":[0.9995453,0.00003574752,0.00004909446,0.0002355479,0.00006585158,0.00006844903],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001636661,0.00001466421,0.001015677,0.0001286923,0.000009270643,0.000009786646,0.0009092492,0.00560398,0.9911135,0.00006282667,0.000002379281,0.001113575],"study_design_scores_gemma":[0.002334585,0.0005797793,0.04703921,0.0005435247,0.00006415337,0.0001080303,0.001451757,0.1945806,0.7434089,0.0002400544,0.008095383,0.001554049],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9963664,0.001368024,0.001030304,0.00003111994,0.0006064043,0.0003841649,0.000005764952,0.0001385633,0.00006923682],"genre_scores_gemma":[0.9956788,0.0004538004,0.003635728,0.0001002476,0.00003248419,0.00006132122,0.000003145182,0.00003042316,0.000004025945],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.2477046,"threshold_uncertainty_score":0.9999933,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1845291117","doi":"10.1155/2015/673025","title":"Microstructural Characterization of Beryllium Treated Al-Si Alloys","year":2015,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Aluminum Alloy Microstructure Properties","field":"Engineering","cited_by":10,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Université du Québec à Chicoutimi","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Materials science; Eutectic system; Beryllium; Alloy; Precipitation; Phase (matter); Metallurgy; Optical microscope; Magnesium; Microstructure; Scanning electron microscope; Composite material","retraction":null,"screen_n_in":null,"score":{"opus":0.006549619563543522,"gpt":0.2048203446819187,"spread":0.1982707251183752,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002624737,0.0001464368,0.0002034302,0.0001658282,0.00002405554,0.00005908993,0.0001693123,0.00003693038,0.000006143711],"category_scores_gemma":[0.00005365229,0.0001311969,0.000008107153,0.0003303792,0.0001650378,0.001074633,0.00005225179,0.000048153,0.000001907066],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007598769,"about_ca_system_score_gemma":0.00002127917,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001484817,"about_ca_topic_score_gemma":0.000003341977,"domain_scores_codex":[0.9991277,0.000005932968,0.0002528955,0.0001707853,0.0001769971,0.0002656649],"domain_scores_gemma":[0.9996937,0.000007714646,0.00003326724,0.0001195904,0.00007893098,0.00006677972],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000007190433,0.00000143172,0.0006558734,0.00006251905,0.000001869925,0.000001390741,0.0003165016,0.005582535,0.9926723,0.0000417173,0.000002119226,0.0006545381],"study_design_scores_gemma":[0.0001853655,0.00002116947,0.006542778,0.00005478153,0.00000295049,0.00001756927,0.00003890303,0.003780391,0.9881014,0.00002880171,0.00105697,0.0001689554],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9981048,0.000628433,0.0002124912,0.00001128583,0.0007722458,0.0001010937,0.0000142821,0.0000958071,0.00005962891],"genre_scores_gemma":[0.9981744,0.0003244522,0.001408874,0.00001510506,0.00003590804,0.000008466701,0.000008590686,0.000019004,0.000005157298],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.005886904,"threshold_uncertainty_score":0.5350056,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2903954408","doi":"10.1155/2018/6501985","title":"Superposed Incremental Deformations of an Elastic Solid Reinforced with Fibers Resistant to Extension and Flexure","year":2018,"lang":"en","type":"article","venue":"Advances in Materials Science and Engineering","topic":"Nonlocal and gradient elasticity in micro/nano structures","field":"Materials Science","cited_by":10,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Natural Sciences and Engineering Research Council of Canada; University of Alberta","keywords":"Materials science; Composite material; Extension (predicate logic); Structural engineering; Computer science","retraction":null,"screen_n_in":null,"score":{"opus":0.004446539906031994,"gpt":0.2310359285596839,"spread":0.2265893886536519,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004316682,0.0001217407,0.0001782837,0.0001711052,0.0001654525,0.00008957651,0.0001638741,0.00002552176,0.0000233238],"category_scores_gemma":[0.0001184978,0.00008974088,0.000004640884,0.0003074206,0.0004667911,0.001056146,0.00009603333,0.0000302553,0.000002501462],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002803315,"about_ca_system_score_gemma":0.00003026546,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00004139225,"about_ca_topic_score_gemma":0.00004454284,"domain_scores_codex":[0.9989601,0.00001124846,0.000241256,0.0002587959,0.0002406562,0.0002879037],"domain_scores_gemma":[0.9995781,0.00003058265,0.00004873535,0.0001398842,0.00009690235,0.0001058194],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00009638863,0.000003679098,0.00002569944,0.00005481021,6.091385e-7,0.000001555153,0.0005789534,0.005390697,0.9930484,0.0005865918,7.003735e-7,0.0002119254],"study_design_scores_gemma":[0.0002180492,0.0004586065,0.003474834,0.0001797502,0.000004885821,0.0000227853,0.0002715608,0.002303178,0.9927715,0.00009281487,0.00005595114,0.000146066],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9980134,0.00005646354,0.001458646,0.00001501327,0.0002436685,0.0001412802,0.00001988277,0.00002455372,0.00002710766],"genre_scores_gemma":[0.984917,0.00002597368,0.01496432,0.00003789188,0.00003681837,0.000007065394,0.000002073552,0.000006275968,0.000002609783],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.01350567,"threshold_uncertainty_score":0.3659527,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null}]}