{"meta":{"page":1,"per_page":50,"max_per_page":100,"total":99,"total_is_capped":false,"direct_labels_cover":0,"predictions_cover":99,"direct_label_status":"direct model label, unvalidated","prediction_status":"machine_predicted_unvalidated (Codex and Gemma teacher distillation)","score_status":"score_only:v0-immature-baseline (scores rank; they never assert a category)","snapshot":{"source":"OpenAlex, pinned release, all 482 partitions","release":"2026-06-24","frame_built":"2026-07-12","author_layer_release":"2026-06-26"},"query_hash":"e263e1ff0eae","filters":{"venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture"}},"results":[{"id":"W2025562530","doi":"10.1243/095440503321148858","title":"A review of conventional and modern single-point sheet metal forming methods","year":2003,"lang":"en","type":"review","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":154,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"","keywords":"Forming processes; Spinning; Sheet metal; Metal forming; Mechanical engineering; Shear (geology); Materials science; Roll forming; Deformation (meteorology); Material flow; Incremental sheet forming; Single point; Point (geometry); Computer science; Engineering drawing; Engineering; Computer simulation; Composite material; Geometry; Simulation","authors":[{"name":"E Hagan","is_ca":true},{"name":"J. Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.03309351504852531,"gpt":0.297188587417082,"spread":0.2640950723685567,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.001891666,0.0005393559,0.002408043,0.0004760405,0.00002851787,0.00001427054,0.0005596258,0.0004087006,0.00002304595],"category_scores_gemma":[0.0009975226,0.0003904242,0.001096371,0.0004391924,0.00008187999,0.0003833868,0.0001005402,0.0008813145,2.366165e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001630607,"about_ca_system_score_gemma":0.00008393748,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":4.226161e-7,"about_ca_topic_score_gemma":3.140932e-8,"domain_scores_codex":[0.9966335,0.00002869596,0.002320294,0.0001972189,0.0005650004,0.0002552857],"domain_scores_gemma":[0.9975559,0.0001875831,0.001475714,0.0001948088,0.0004506859,0.0001352915],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"systematic_review","study_design_gemma":"not_applicable","study_design_scores_codex":[0.000029371,0.0001941324,3.902919e-7,0.6646517,0.002838743,0.000003605891,0.0001163834,0.02657072,0.009418273,0.04760124,0.001312198,0.2472633],"study_design_scores_gemma":[0.0006009978,0.0003017244,4.93338e-7,0.2607566,0.00356877,0.0007872841,0.00001476956,0.01008039,0.09231938,0.002005936,0.6287037,0.00085991],"study_design_candidate":"systematic_review","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.0000933515,0.9277205,0.07053915,0.0000127766,0.0008594821,0.0005597185,0.00003287696,0.00006172324,0.0001203693],"genre_scores_gemma":[0.001763857,0.9416924,0.05633,0.00001260309,0.00009082855,0.00001597189,0.000005617159,0.00007657158,0.000012202],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.6273915,"threshold_uncertainty_score":0.9998547,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2063313684","doi":"10.1243/0954405042418400","title":"Wall thickness variations in single-point incremental forming","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":153,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Single point; Point (geometry); Double layered; Incremental sheet forming; Path (computing); Sheet metal; Materials science; Tool path; Thinning; Metal forming; Geometry; Computer science; Composite material; Computer simulation; Mathematics; Metallurgy; Simulation","authors":[{"name":"David J. Young","is_ca":false},{"name":"J. Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01113251451960758,"gpt":0.2083224352054902,"spread":0.1971899206858826,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006357464,0.0002319507,0.0004260568,0.0003996647,0.00003146976,0.00001828054,0.0004308494,0.0001935383,0.00001044664],"category_scores_gemma":[0.0004107645,0.0001874017,0.0002155238,0.0004172148,0.00003574788,0.0005977306,0.00005663139,0.0005608186,5.901293e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0003425281,"about_ca_system_score_gemma":0.00004031322,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006570514,"about_ca_topic_score_gemma":0.000001529913,"domain_scores_codex":[0.9982026,0.000003871684,0.0009868458,0.0001086782,0.0004662323,0.0002317979],"domain_scores_gemma":[0.9992146,0.00004803643,0.0003281126,0.0001104338,0.0002148348,0.00008397567],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002193895,0.00007459745,0.00002420672,0.0003477513,0.0000765275,0.000001604212,0.0003007987,0.7022714,0.2466158,0.04996477,0.00004032336,0.0002602579],"study_design_scores_gemma":[0.0009158707,0.0001346641,0.0002281047,0.001144507,0.00006428918,0.00009059957,0.00006582354,0.01916024,0.9724219,0.004792084,0.000749291,0.0002326457],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8873124,0.0001669012,0.1104054,0.0002332822,0.001102598,0.0003444797,0.000008632937,0.0001505577,0.0002757918],"genre_scores_gemma":[0.9818029,0.00003294802,0.01803053,0.00001460433,0.00007931243,0.000005354608,0.000001233569,0.00002920731,0.000003889505],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7258061,"threshold_uncertainty_score":0.7642018,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2094692082","doi":"10.1243/095440505x32210","title":"Forming limit diagrams for single-point incremental forming of aluminium sheet","year":2005,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":150,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Aluminium; Single point; Forming processes; Pyramid (geometry); Limit (mathematics); Point (geometry); Incremental sheet forming; Cone (formal languages); Materials science; Forming limit diagram; Geometry; Mathematics; Mathematical analysis; Metallurgy; Composite material; Algorithm","authors":[{"name":"J. Jeswiet","is_ca":true},{"name":"David J. Young","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01454152561953014,"gpt":0.2170481548455981,"spread":0.2025066292260679,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0008059072,0.0003097141,0.0006452064,0.0003390985,0.00004345072,0.00001721412,0.0005331213,0.000228635,0.00001178429],"category_scores_gemma":[0.000600032,0.0002493475,0.0004636638,0.0002664159,0.00005595119,0.0007196993,0.00007631937,0.0004032099,3.120999e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002023582,"about_ca_system_score_gemma":0.00002928153,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001306682,"about_ca_topic_score_gemma":5.808936e-7,"domain_scores_codex":[0.9976578,0.000003618013,0.00135668,0.0001370589,0.0005327929,0.0003119994],"domain_scores_gemma":[0.9985884,0.0001229248,0.0006368125,0.0001447921,0.0003899355,0.0001171761],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00008393604,0.0001008637,0.00001614157,0.001249343,0.000240229,4.547839e-7,0.0002935173,0.3544519,0.6234439,0.01616258,0.0004195441,0.003537587],"study_design_scores_gemma":[0.0006387363,0.0002683988,0.00001882137,0.0007864275,0.000129009,0.00005025294,0.00008564795,0.06111899,0.9325941,0.0004563126,0.003638333,0.00021496],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8810016,0.0003719772,0.1160211,0.0001456603,0.001236696,0.0006847812,0.00003546246,0.0001684061,0.0003343139],"genre_scores_gemma":[0.9621298,0.00004988665,0.03748124,0.00001241461,0.0002557123,0.00001182964,0.000002804717,0.00004723856,0.000009069935],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3091502,"threshold_uncertainty_score":0.9999959,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1992553170","doi":"10.1243/09544054jem1387","title":"Adaptable design: Concepts, methods, and applications","year":2009,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Product Development and Customization","field":"Business, Management and Accounting","cited_by":109,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Calgary","funders":"","keywords":"Design technology; Modular design; Product design; Systems engineering; Personalization; Computer science; Manufacturing engineering; Product (mathematics); Quality (philosophy); Design review (U.S. government); Engineering; Risk analysis (engineering); Business; Operations management; Product testing; World Wide Web","authors":[{"name":"Peihua Gu","is_ca":true},{"name":"Deyi Xue","is_ca":true},{"name":"A.Y.C. Nee","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01335750718545107,"gpt":0.2352807287514984,"spread":0.2219232215660473,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007564411,0.0001426098,0.0002712255,0.000182106,0.00005671635,0.00003715457,0.0002816874,0.00008790807,0.00001004001],"category_scores_gemma":[0.0003610903,0.0001043338,0.00008480765,0.000341834,0.00003119323,0.0006604473,0.00004625775,0.0002159631,6.390003e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002670689,"about_ca_system_score_gemma":0.00002666076,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001032978,"about_ca_topic_score_gemma":3.812786e-8,"domain_scores_codex":[0.9990577,0.000002560716,0.0004533539,0.0001094906,0.0002428251,0.0001340654],"domain_scores_gemma":[0.9990666,0.00002736557,0.0004774909,0.00006635602,0.0003404077,0.00002177564],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"theoretical_or_conceptual","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001955477,0.0001861899,0.00006910256,0.000829748,0.0002146477,0.000001109093,0.0001501011,0.2266307,0.2191268,0.5242183,0.004687912,0.02368983],"study_design_scores_gemma":[0.002049646,0.0001440795,0.001519136,0.0009692669,0.0005218288,0.00007635386,0.000260054,0.04389324,0.7296216,0.0193226,0.2009332,0.0006889228],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.03200834,0.001050423,0.9625235,0.001864016,0.0009997693,0.000676111,0.000002008679,0.00008775338,0.0007881472],"genre_scores_gemma":[0.9570863,0.00006535083,0.04222189,0.0001146422,0.0004693336,0.000004398483,0.000001000916,0.00001042983,0.00002666698],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.925078,"threshold_uncertainty_score":0.4254609,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2001880410","doi":"10.1243/0954405042323559","title":"Analysis of surface roughness for parts formed by computer numerical controlled incremental forming","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":107,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Surface roughness; Surface finish; Materials science; Sheet metal; Shear (geology); Surface (topology); Interferometry; Numerical control; Forming processes; White light interferometry; Composite material; Engineering drawing; Mechanical engineering; Geometry; Optics; Metallurgy; Engineering; Mathematics; Physics","authors":[{"name":"E Hagan","is_ca":true},{"name":"J. Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.008311120653742777,"gpt":0.2215133286049475,"spread":0.2132022079512047,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006637289,0.0002761539,0.001073635,0.0003222495,0.00003791155,0.00001527737,0.0004281593,0.0001905598,0.000007364562],"category_scores_gemma":[0.0002651151,0.000208935,0.0006973906,0.000553683,0.00004287704,0.0003929423,0.00004748238,0.0003017949,1.076042e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000166224,"about_ca_system_score_gemma":0.00003250994,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00000354849,"about_ca_topic_score_gemma":2.890928e-7,"domain_scores_codex":[0.9978101,0.000004432057,0.00127649,0.000131238,0.0005236769,0.0002541266],"domain_scores_gemma":[0.9986363,0.0001270214,0.0006332113,0.0001183848,0.0003808471,0.0001042437],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001387013,0.00006132895,0.00002129318,0.0003684867,0.00109936,2.570786e-7,0.0001031011,0.9115949,0.07928857,0.007009141,0.0001477361,0.0001671401],"study_design_scores_gemma":[0.002462454,0.000221498,0.00005791213,0.0003556265,0.0008485443,0.000009763618,0.00002923758,0.2746546,0.7201369,0.0004280078,0.0005888225,0.0002065549],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5413918,0.0001382107,0.4574504,0.00004582122,0.0004734705,0.0003856547,0.00003619389,0.00006079045,0.00001764054],"genre_scores_gemma":[0.9760304,0.00002983001,0.02381172,0.00001011267,0.00006927374,0.0000090359,0.000006903708,0.00002881895,0.00000392237],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6408484,"threshold_uncertainty_score":0.852012,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2176185364","doi":"10.1177/0954405415599946","title":"Minimal quantity cooling lubrication in turning of Ti6Al4V: Influence on surface roughness, cutting force and tool wear","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":73,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"National Research Foundation","keywords":"Machinability; Lubrication; Coolant; Machining; Materials science; Surface roughness; Tool wear; Titanium alloy; Surface finish; Metallurgy; Cutting fluid; Cutting tool; Mechanical engineering; Composite material; Alloy; Engineering","authors":[{"name":"Salman Pervaiz","is_ca":false},{"name":"Ibrahim Deiab","is_ca":true},{"name":"Amir Rashid","is_ca":false},{"name":"Mihai Nicolescu","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.009984223438474594,"gpt":0.2178764720968963,"spread":0.2078922486584217,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005669302,0.0001868445,0.0003868415,0.0001584691,0.00002411712,0.00001456356,0.0002413076,0.0001332771,8.647923e-7],"category_scores_gemma":[0.001013783,0.000155778,0.00007515201,0.000329074,0.00003767154,0.0005003212,0.00004574387,0.0004417171,1.214719e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008594138,"about_ca_system_score_gemma":0.00003982655,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000003707481,"about_ca_topic_score_gemma":3.615189e-7,"domain_scores_codex":[0.9986386,0.0000050043,0.0007125507,0.0001172917,0.0003523339,0.0001741661],"domain_scores_gemma":[0.9990408,0.00008092179,0.0004257056,0.00007688236,0.000303803,0.00007187459],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00007304834,0.00001984481,0.0002474131,0.0004609974,0.00002608526,5.196621e-7,0.0002961825,0.9641111,0.03203067,0.002562703,0.000009886156,0.000161532],"study_design_scores_gemma":[0.001019772,0.0002212429,0.001273488,0.001964923,0.00006344564,0.00003604267,0.0002605261,0.6207206,0.3736584,0.0003415427,0.0001783004,0.0002617804],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9484023,0.0003542266,0.05071131,0.00003891476,0.0003014887,0.0001219617,0.000003982326,0.00003188895,0.0000339172],"genre_scores_gemma":[0.9849971,0.0001487071,0.01477309,0.000006099543,0.00004829584,0.000001449909,8.429595e-7,0.00002097381,0.000003440902],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3433905,"threshold_uncertainty_score":0.6352443,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2086666975","doi":"10.1243/0954405011518700","title":"Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools","year":2001,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":62,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Surface integrity; Materials science; Residual stress; Boron nitride; Enhanced Data Rates for GSM Evolution; Scanning electron microscope; Tool wear; Ultimate tensile strength; Metallurgy; Composite material; Cutting tool; Machining","authors":[{"name":"Hossam A. Kishawy","is_ca":true},{"name":"M.A. Elbestawi","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.006893548201410624,"gpt":0.1900797439946874,"spread":0.1831861957932767,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000326473,0.0002839902,0.0005644803,0.0001626018,0.00004754291,0.00002548398,0.0002967077,0.0001695924,0.000008504802],"category_scores_gemma":[0.0003422173,0.0002101086,0.000120565,0.0003247132,0.00005622337,0.0004724235,0.00005669658,0.0006712871,1.015154e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000824805,"about_ca_system_score_gemma":0.0000359836,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004266437,"about_ca_topic_score_gemma":6.934619e-7,"domain_scores_codex":[0.9984335,0.000004709488,0.0007490284,0.0001477982,0.0004239426,0.0002410405],"domain_scores_gemma":[0.998941,0.00006889069,0.0004494997,0.0001072073,0.000335662,0.0000977192],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001662934,0.00002285786,0.00006937662,0.0005790005,0.0001052358,0.000002022736,0.0001043743,0.7740989,0.2240195,0.0007122968,0.000007549053,0.0001125393],"study_design_scores_gemma":[0.001579518,0.0002530707,0.0008896513,0.001653206,0.0001685185,0.0001906682,0.0001634276,0.09493682,0.8994245,0.0001027079,0.0003193677,0.0003185284],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9530971,0.0004583402,0.04581476,0.00007275952,0.0002910986,0.0001638264,0.00001318984,0.0000617873,0.00002713655],"genre_scores_gemma":[0.9810668,0.0005177576,0.01826169,0.000004367538,0.00009166083,0.000001227107,0.000001934565,0.00003818755,0.00001634653],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6791621,"threshold_uncertainty_score":0.8567979,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2015284286","doi":"10.1243/095440502320405458","title":"Forming parameters for incremental forming of aluminium alloy sheet metal","year":2002,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":61,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"","keywords":"Sheet metal; Materials science; Aluminium; Alloy; Conical surface; Strain hardening exponent; Plane stress; Aluminium alloy; Forming processes; Metallurgy; Hardening (computing); Composite material; Structural engineering; Finite element method; Engineering","authors":[{"name":"J. Jeswiet","is_ca":true},{"name":"E Hagan","is_ca":true},{"name":"Alex Szekeres","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01828711967214795,"gpt":0.2174714362712883,"spread":0.1991843165991403,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007497722,0.000304548,0.0006966668,0.0003760514,0.00004181526,0.00001421011,0.0005438045,0.0002136266,0.00001778277],"category_scores_gemma":[0.0005862042,0.0002439628,0.000531227,0.0002880405,0.0000473842,0.0006055657,0.00006519735,0.0003946145,2.938869e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001756938,"about_ca_system_score_gemma":0.00001478731,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002378677,"about_ca_topic_score_gemma":2.621752e-7,"domain_scores_codex":[0.9977045,0.000004353156,0.001299033,0.0001357811,0.000557107,0.0002992339],"domain_scores_gemma":[0.9986797,0.0001268248,0.0006246102,0.0001412554,0.0003177214,0.0001098964],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00007422556,0.00009855143,0.00002575097,0.001795646,0.0005388279,9.201827e-7,0.0003464182,0.4778649,0.5049409,0.01171147,0.0009964238,0.001605986],"study_design_scores_gemma":[0.0006152618,0.000241462,0.00001629359,0.0005622313,0.0001755841,0.00004393632,0.0000662302,0.1284887,0.8672526,0.0003982346,0.001932417,0.0002070594],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9469924,0.000375832,0.05031805,0.00008206825,0.00135428,0.0005735342,0.0000313485,0.0001258176,0.0001466448],"genre_scores_gemma":[0.9653559,0.00007654524,0.03438764,0.00000919818,0.00009543063,0.00001201906,0.000001670057,0.00004372391,0.00001780767],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3623117,"threshold_uncertainty_score":0.9948514,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2047527504","doi":"10.1243/09544054jem856","title":"Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivity","year":2007,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":60,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Residual stress; Materials science; Ultimate tensile strength; Composite material; Machining; Softening; Thermal conductivity; Residual; Metallurgy","authors":[{"name":"Mohamed N.A. Nasr","is_ca":true},{"name":"E-G Ng","is_ca":true},{"name":"M.A. Elbestawi","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.00835632293319987,"gpt":0.1975140197185538,"spread":0.1891576967853539,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004734526,0.0002562593,0.0004492507,0.0001953076,0.0000491191,0.00001479112,0.0002722261,0.0001701541,0.000002171805],"category_scores_gemma":[0.0005847116,0.0001816377,0.0001146608,0.0002068717,0.00006422402,0.0003564564,0.00005395057,0.000581276,8.126875e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000047018,"about_ca_system_score_gemma":0.00002794492,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001919858,"about_ca_topic_score_gemma":2.532267e-7,"domain_scores_codex":[0.9986262,0.000005848107,0.0006130476,0.0001283715,0.0003916133,0.0002349288],"domain_scores_gemma":[0.999063,0.0001570535,0.0003960887,0.00007946416,0.0002165607,0.00008781002],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001256369,0.00003476414,0.0000255002,0.0008718044,0.00009516421,0.000001438213,0.0002662704,0.5988894,0.397095,0.001214727,0.000007485979,0.001372886],"study_design_scores_gemma":[0.0006186971,0.0002586476,0.0008235828,0.001403007,0.00009451885,0.00002189526,0.00009324485,0.01374564,0.9826579,0.00005004623,0.00005679951,0.0001760298],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9770408,0.000653999,0.02137976,0.00004145475,0.0005913802,0.0001706811,0.000003116075,0.00005417719,0.00006463939],"genre_scores_gemma":[0.9955403,0.00007991643,0.004187463,0.000008265554,0.0001441582,0.000002262444,4.372836e-7,0.00003332077,0.000003830548],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5855629,"threshold_uncertainty_score":0.7406969,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2127427832","doi":"10.1177/2041297510394057","title":"Porosity and cutting forces: from macroscale to microscale machining correlations","year":2011,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":58,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Western University","funders":"","keywords":"Microscale chemistry; Machinability; Machining; Surface micromachining; Porosity; Materials science; Context (archaeology); Mechanical engineering; Metallurgy; Composite material; Fabrication; Engineering; Geology","authors":[{"name":"O. Remus Tutunea‐Fatan","is_ca":true},{"name":"M. Abolghasemi Fakhri","is_ca":true},{"name":"Evgueni V. Bordatchev","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.008946826563844035,"gpt":0.1916685789442008,"spread":0.1827217523803568,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002106224,0.0001952742,0.0003308701,0.0001376443,0.00006197273,0.00001622905,0.0002788591,0.0001299076,0.00001152905],"category_scores_gemma":[0.0002484331,0.0001586652,0.0001103858,0.0002189302,0.00003497762,0.0003400463,0.00007257947,0.0003931611,3.704529e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004681056,"about_ca_system_score_gemma":0.00001456432,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006856588,"about_ca_topic_score_gemma":6.850393e-7,"domain_scores_codex":[0.9989071,0.000002590163,0.0005632956,0.0001233361,0.0002200177,0.0001836483],"domain_scores_gemma":[0.9993241,0.0000472274,0.0002518291,0.00008054134,0.0001702046,0.0001261407],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004885866,0.00003023588,0.000313588,0.0002569158,0.00009495798,8.55609e-7,0.001194524,0.9251473,0.06795992,0.003959589,0.0001030025,0.0008902577],"study_design_scores_gemma":[0.0008845444,0.0002036497,0.002299637,0.00137737,0.0002191651,0.00006984383,0.0003440953,0.1574848,0.833609,0.001151283,0.001913168,0.0004434644],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.6207058,0.0003106311,0.3775721,0.00004370341,0.0008958981,0.0001497238,0.00002853409,0.00007248369,0.0002211716],"genre_scores_gemma":[0.9333885,0.00007454892,0.06639935,0.000015913,0.00008355946,0.000002560406,0.000001599091,0.00002560856,0.000008403982],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7676625,"threshold_uncertainty_score":0.6470178,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2165649889","doi":"10.1177/0954405414534827","title":"Milling burr formation, modeling and control: A review","year":2014,"lang":"en","type":"review","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":45,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Machining; Mechanical engineering; Residual stress; Manufacturing engineering; Process (computing); Surface finish; Quality (philosophy); Chip formation; Enhanced Data Rates for GSM Evolution; Engineering; Process engineering; Engineering drawing; Computer science; Tool wear; Materials science; Metallurgy","authors":[{"name":"Seyed Ali Niknam","is_ca":true},{"name":"Victor Songméné","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01251217557141895,"gpt":0.2354059493207114,"spread":0.2228937737492925,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0006383887,0.0004277833,0.001715506,0.0002449836,0.00004330578,0.00002098536,0.0004412277,0.0002910495,0.000003189423],"category_scores_gemma":[0.0005757878,0.0002990357,0.0004661172,0.0003046363,0.0000284472,0.000377185,0.00004981673,0.0008026359,3.180982e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008787617,"about_ca_system_score_gemma":0.00004430754,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":3.528588e-7,"about_ca_topic_score_gemma":5.401971e-8,"domain_scores_codex":[0.997709,0.000007861591,0.001535689,0.0001467985,0.0003791921,0.000221474],"domain_scores_gemma":[0.9984319,0.00008433068,0.0008750143,0.0001222901,0.0003745041,0.0001119128],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.000004953693,0.000008300155,3.057747e-8,0.09369979,0.0001701049,3.82491e-7,0.00002239517,0.8879125,0.00004642507,0.001386731,0.0001193211,0.01662903],"study_design_scores_gemma":[0.0005249159,0.0001035112,6.024935e-8,0.1383149,0.001794079,0.0002763403,0.00001086864,0.5724558,0.0008158084,0.0001423283,0.2850696,0.0004918375],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.00001537864,0.6357902,0.3634132,0.00002378075,0.00043738,0.00025224,0.00001034548,0.00003958468,0.0000178178],"genre_scores_gemma":[0.009414806,0.9850709,0.005233872,0.00001754269,0.0001851936,0.00001111741,0.000004441338,0.00005899868,0.000003172422],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.3581794,"threshold_uncertainty_score":0.9999462,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2906458179","doi":"10.1177/0954405418816846","title":"An integrated framework of enterprise information systems in smart manufacturing system via business process reengineering","year":2018,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Digital Transformation in Industry","field":"Engineering","cited_by":43,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Toronto","funders":"National Natural Science Foundation of China","keywords":"Enterprise information system; Enterprise integration; Business process reengineering; Enterprise systems engineering; Computer science; Process management; Information system; Enterprise life cycle; Enterprise system; Enterprise modelling; Manufacturing execution system; Enterprise software; Enterprise architecture; Knowledge management; Computer-integrated manufacturing; Systems engineering; Manufacturing engineering; Engineering; Lean manufacturing","authors":[{"name":"Yuanju Qu","is_ca":false},{"name":"Xinguo Ming","is_ca":false},{"name":"Yanrong Ni","is_ca":false},{"name":"Xiuzhen Li","is_ca":false},{"name":"Zhiwen Liu","is_ca":false},{"name":"Xianyu Zhang","is_ca":false},{"name":"Liuyue Xie","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.006004766209656689,"gpt":0.198524879644964,"spread":0.1925201134353073,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0006082629,0.0003516684,0.0006613241,0.0006794169,0.00003112331,0.00005031663,0.000730188,0.0003827157,0.000005140178],"category_scores_gemma":[0.0002323059,0.0002865783,0.0001558604,0.0007689066,0.00007713135,0.002009302,0.00003503271,0.0007745657,0.000001147577],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002411785,"about_ca_system_score_gemma":0.00005886127,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001068404,"about_ca_topic_score_gemma":4.540808e-7,"domain_scores_codex":[0.9971997,0.000007648527,0.001706394,0.000122845,0.0006541384,0.0003092382],"domain_scores_gemma":[0.9982019,0.00005422805,0.0005990454,0.000195218,0.0008105504,0.0001390757],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00007498383,0.00004309232,0.0000637644,0.003350431,0.0001232693,0.00000109512,0.0005192233,0.9834968,0.008881678,0.00283951,0.00003016806,0.0005760126],"study_design_scores_gemma":[0.0008668008,0.0002275892,0.0009069867,0.008779352,0.0001108069,0.0001732152,0.001288293,0.2790417,0.7070013,0.00007602789,0.001090773,0.0004370847],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.707997,0.00009276853,0.2885826,0.0000175645,0.00248348,0.0003653592,0.0000346718,0.000145654,0.0002808755],"genre_scores_gemma":[0.9971828,0.00002293837,0.002570979,0.000003559902,0.0001665494,0.00001111125,0.000004476618,0.00003631998,0.000001262927],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.704455,"threshold_uncertainty_score":0.9999586,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2620971633","doi":"10.1177/0954405417711736","title":"Improvement of user experience using virtual reality in open-architecture product design","year":2017,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Design Education and Practice","field":"Engineering","cited_by":42,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Manitoba","funders":"National Natural Science Foundation of China","keywords":"User experience design; Computer science; Architecture; Product (mathematics); Product design; User interface; User interface design; Human–computer interaction; New product development; Product engineering; Virtual reality; Function (biology); Open architecture; User journey; Computer user satisfaction; Software; Operating system","authors":[{"name":"Hao Song","is_ca":false},{"name":"Fangyuan Chen","is_ca":false},{"name":"Qingjin Peng","is_ca":true},{"name":"Jian Zhang","is_ca":false},{"name":"Peihua Gu","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.0427789395361809,"gpt":0.2882266985722907,"spread":0.2454477590361098,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001141204,0.0002247165,0.0004804298,0.000188706,0.00006465689,0.00005729629,0.001239751,0.0001259426,0.00001463965],"category_scores_gemma":[0.001227614,0.0001749103,0.0001325955,0.0001826395,0.00007993272,0.0008226748,0.0001485227,0.0005570309,1.940139e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001227652,"about_ca_system_score_gemma":0.0001004396,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002125589,"about_ca_topic_score_gemma":8.849109e-7,"domain_scores_codex":[0.998356,0.00001045529,0.0008439357,0.0001532331,0.0004194481,0.0002168766],"domain_scores_gemma":[0.9985341,0.0000674301,0.0007410674,0.0002820661,0.0002777234,0.00009759652],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00009463335,0.000073521,0.00002709531,0.0002452516,0.00007118696,0.000001005091,0.0004708828,0.6784641,0.3170803,0.002264375,0.000164423,0.001043164],"study_design_scores_gemma":[0.0007734168,0.0001715705,0.0009441235,0.0007475081,0.00006995451,0.00005015472,0.0002287409,0.02196999,0.971992,0.0002271503,0.00260192,0.0002234905],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8423853,0.0001557011,0.1538305,0.0004006535,0.002351561,0.0006417668,0.00001305224,0.00002934034,0.0001921237],"genre_scores_gemma":[0.9900835,0.00005611499,0.009687048,0.000009912483,0.0001191342,0.000006535302,3.822247e-7,0.00002264507,0.00001478229],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6564941,"threshold_uncertainty_score":0.7132635,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W4213117502","doi":"10.1177/09544054221078144","title":"Prediction of tool wear based on GA-BP neural network","year":2022,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":41,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology","keywords":"Artificial neural network; Backpropagation; Genetic algorithm; Approximation error; Mean squared error; Algorithm; Anisotropy; Computer science; Mean absolute percentage error; Artificial intelligence; Materials science; Machine learning; Mathematics; Statistics","authors":[{"name":"Weihua Wei","is_ca":false},{"name":"Rui Cong","is_ca":false},{"name":"Yuantong Li","is_ca":false},{"name":"Ayodele Daniel Abraham","is_ca":false},{"name":"Changyong Yang","is_ca":false},{"name":"Zengtao Chen","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.008352201400205095,"gpt":0.1837754815513098,"spread":0.1754232801511047,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004307255,0.0002049663,0.0003805876,0.0001873772,0.00006982662,0.000008657441,0.000381305,0.00009441475,0.00002767429],"category_scores_gemma":[0.0002021891,0.0001702029,0.0002180855,0.0004119612,0.00002894761,0.0002133584,0.0000579613,0.0006529703,1.122119e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001075862,"about_ca_system_score_gemma":0.00003591065,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":5.808963e-7,"about_ca_topic_score_gemma":4.580132e-8,"domain_scores_codex":[0.9983893,0.000006619177,0.0007166797,0.0001136513,0.0005704694,0.000203265],"domain_scores_gemma":[0.9991691,0.00006189167,0.0004160467,0.0001096276,0.0001814829,0.00006190748],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00009782265,0.00003571796,0.00002212805,0.0003335876,0.00005592277,6.763331e-7,0.0000625763,0.987087,0.00902915,0.002584899,0.0004641106,0.0002264615],"study_design_scores_gemma":[0.0006857652,0.0003975145,0.0001201485,0.0003451461,0.0000875619,0.00002941494,0.00005337261,0.9168853,0.07762958,0.0001714074,0.003445365,0.0001494374],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5602811,0.000767756,0.4300209,0.0003989382,0.006961527,0.0007002781,0.0001500538,0.0002856343,0.0004337991],"genre_scores_gemma":[0.9936002,0.00004654006,0.00609901,0.00002542927,0.0001769032,0.000007579106,0.000003845677,0.00003218673,0.000008234883],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4333192,"threshold_uncertainty_score":0.6940674,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2974215121","doi":"10.1177/0954405419875344","title":"Role of energy consumption, cutting tool and workpiece materials towards environmentally conscious machining: A comprehensive review","year":2019,"lang":"en","type":"review","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Energy Efficiency and Management","field":"Energy","cited_by":41,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Ontario Tech University; University of Guelph","funders":"","keywords":"Machining; Environmentally friendly; Sustainability; Energy consumption; Process (computing); Benchmarking; Environmental impact assessment; Manufacturing engineering; Cutting tool; Machine tool; Mechanical engineering; Process engineering; Computer science; Engineering; Business","authors":[{"name":"Salman Pervaiz","is_ca":false},{"name":"Sathish Kannan","is_ca":false},{"name":"Ibrahim Deiab","is_ca":true},{"name":"Hossam A. Kishawy","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01800336126240698,"gpt":0.2396668503343838,"spread":0.2216634890719768,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.0006514877,0.0004939593,0.002130403,0.0002595254,0.00004266776,0.00001905155,0.0006502491,0.0003198015,0.00005725513],"category_scores_gemma":[0.0003127278,0.000350869,0.0005377423,0.0002039224,0.000117533,0.0001728012,0.0002720918,0.0004751297,9.828964e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001146142,"about_ca_system_score_gemma":0.00008690025,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00001080556,"about_ca_topic_score_gemma":1.882431e-7,"domain_scores_codex":[0.9970392,0.00003329179,0.001813073,0.0002647957,0.0005857107,0.000263936],"domain_scores_gemma":[0.9972141,0.0001278616,0.002170122,0.0002082695,0.0001886515,0.00009096975],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"design_other","study_design_gemma":"not_applicable","study_design_scores_codex":[0.0001501169,0.0003965193,0.000002606744,0.2911049,0.003695431,0.00001147135,0.0002196721,0.1149814,0.0206378,0.2217885,0.0008244122,0.3461873],"study_design_scores_gemma":[0.0005342,0.0001960593,0.000005945584,0.08075643,0.002196098,0.0002451247,0.00003388376,0.0002939822,0.02499053,0.0001191801,0.8901525,0.0004760385],"study_design_candidate":"not_applicable","study_design_consensus":null,"genre_codex":"review","genre_gemma":"review","genre_scores_codex":[0.001430349,0.9962625,0.0007618905,0.00004919497,0.0008406412,0.0004211087,0.00003893993,0.00002416119,0.0001711961],"genre_scores_gemma":[0.0235385,0.9747767,0.001427146,0.00004381412,0.0001113828,0.0000144333,0.00000974033,0.00004528515,0.00003295771],"genre_candidate":"review","genre_consensus":"review","teacher_disagreement_score":0.8893281,"threshold_uncertainty_score":0.9998943,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1996841855","doi":"10.1177/0954405413501670","title":"Single-point incremental forming of 6061-T6 using electrically assisted forming methods","year":2014,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Electromagnetic Effects on Materials","field":"Engineering","cited_by":38,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"","keywords":"Formability; Current (fluid); Current density; Materials science; Resistive touchscreen; Spall; Surface finish; Range (aeronautics); Composite material; Surface roughness; Direct current; Metallurgy; Voltage; Engineering; Electrical engineering","authors":[{"name":"David W. Adams","is_ca":true},{"name":"Jack Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01259490036940722,"gpt":0.2377340306061807,"spread":0.2251391302367735,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaepi_narrow"],"consensus_categories":[],"category_scores_codex":[0.001805627,0.0003633837,0.0009003655,0.0004005407,0.00004680621,0.00002543089,0.0005907623,0.0002613009,0.00001372884],"category_scores_gemma":[0.001288977,0.0002893638,0.0003680597,0.0004577553,0.00006037675,0.0004183098,0.00009146772,0.000554071,2.423056e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0002470282,"about_ca_system_score_gemma":0.00004430543,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000004447529,"about_ca_topic_score_gemma":3.219271e-7,"domain_scores_codex":[0.997384,0.00002769271,0.001425348,0.0001640569,0.0005881859,0.0004107218],"domain_scores_gemma":[0.9983248,0.0002248742,0.000776546,0.0001655212,0.0003666497,0.0001416534],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004684089,0.00004820038,0.00000564724,0.0007914065,0.0001638552,6.702171e-7,0.00007093336,0.1111638,0.8825094,0.002586857,0.00003650216,0.002575864],"study_design_scores_gemma":[0.0006302842,0.0004791999,0.00005118236,0.000867375,0.0002025597,0.0001602147,0.00003006247,0.09017122,0.9064299,0.000322198,0.0004250636,0.0002307625],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.7609953,0.0002399208,0.2372654,0.00003879597,0.0009660324,0.0002637962,0.00000516556,0.00007151909,0.0001540594],"genre_scores_gemma":[0.887463,0.00002696471,0.1122752,0.00000977588,0.0001678265,0.000003436622,8.927471e-7,0.00004956168,0.000003262649],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.1264677,"threshold_uncertainty_score":0.9999558,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2075691046","doi":"10.1243/09544054jem1520","title":"Experimentally validated finite element model of the rubbing and ploughing phases in scratch tests","year":2009,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Surface Polishing Techniques","field":"Engineering","cited_by":36,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Dalhousie University","funders":"U.S. Department of Commerce","keywords":"Rubbing; Grinding; Scratch; Abrasive; Materials science; Chip formation; Plough; Finite element method; Composite material; Mechanical engineering; Metallurgy; Structural engineering; Engineering; Tool wear","authors":[{"name":"Darrel A. Doman","is_ca":true},{"name":"Robert Bauer","is_ca":true},{"name":"Andrew Warkentin","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01273772637380079,"gpt":0.230352754639367,"spread":0.2176150282655662,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003678554,0.0002393515,0.0004291238,0.0001838903,0.00003203789,0.00001746564,0.0004859785,0.0001353947,0.000002005337],"category_scores_gemma":[0.0004139005,0.0001710697,0.0001461881,0.0002816359,0.0000479806,0.0004294424,0.00007781486,0.0005393472,3.236755e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001335189,"about_ca_system_score_gemma":0.00003051371,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002357601,"about_ca_topic_score_gemma":4.002943e-7,"domain_scores_codex":[0.9984472,0.000005357178,0.0007949149,0.0001166576,0.0004081929,0.0002276838],"domain_scores_gemma":[0.9992621,0.00006010015,0.0003375656,0.0001290956,0.0001428936,0.0000682423],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001250746,0.00002752476,0.00001683072,0.00008919656,0.0000245402,3.545765e-7,0.0002089065,0.612045,0.3859654,0.001456707,0.0000487045,0.0001042611],"study_design_scores_gemma":[0.0004047486,0.00007313586,0.00008810923,0.0009783417,0.00003322849,0.000009374366,0.00006542056,0.2085957,0.7884743,0.001083418,0.00006273435,0.0001314769],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9331393,0.0004312618,0.06542963,0.0002344605,0.0003333008,0.0002716665,0.0000144889,0.00008234165,0.00006353733],"genre_scores_gemma":[0.9778688,0.0001132331,0.02193454,0.00002339378,0.00003217676,0.000002981427,4.468179e-7,0.00002116511,0.000003296772],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4034494,"threshold_uncertainty_score":0.697602,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2130589962","doi":"10.1177/0954405414531426","title":"Design rules and applications of single-point incremental forming","year":2014,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":35,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"","keywords":"Simple (philosophy); Point (geometry); Process (computing); Computer science; Single point; Rapid prototyping; Sheet metal; Process design; Incremental sheet forming; Engineering design process; Forming processes; Design process; Engineering drawing; Development (topology); Manufacturing engineering; Industrial engineering; Engineering; Mechanical engineering; Work in process; Simulation; Operations management; Programming language; Mathematics","authors":[{"name":"David W. Adams","is_ca":true},{"name":"Jack Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01140823530525364,"gpt":0.2028904395594832,"spread":0.1914822042542295,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006835886,0.0001877442,0.0004042003,0.0002469289,0.00003000395,0.00001153954,0.0003074994,0.0001328316,0.00000571239],"category_scores_gemma":[0.0002826659,0.0001474158,0.0001391855,0.0001840516,0.00005716452,0.0003111542,0.00005496241,0.0002695289,2.201536e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006314233,"about_ca_system_score_gemma":0.00001310683,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001068228,"about_ca_topic_score_gemma":7.208075e-8,"domain_scores_codex":[0.9986352,0.000005477481,0.0007760489,0.00009126775,0.0003416408,0.0001503878],"domain_scores_gemma":[0.9991145,0.0000988903,0.0003874903,0.0001026256,0.0002186816,0.00007779447],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003229617,0.00005328545,0.00001518846,0.0009832548,0.0001421033,1.78999e-7,0.0001561361,0.2680289,0.6815815,0.04510362,0.0001173481,0.00378621],"study_design_scores_gemma":[0.0003075917,0.0001511865,0.00003757038,0.0004545142,0.00007852048,0.00003734399,0.00003259711,0.04371173,0.9512334,0.002315775,0.001504523,0.0001351701],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.3011841,0.0002247721,0.6976866,0.00003615642,0.0002814502,0.000325404,0.000007249181,0.00008566574,0.0001686501],"genre_scores_gemma":[0.9598259,0.00004770276,0.04000359,0.000005182121,0.00008354572,0.00000696788,8.095288e-7,0.00002262494,0.000003647788],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.6586419,"threshold_uncertainty_score":0.6011444,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2972515818","doi":"10.1177/0954405419875355","title":"A study on sustainability assessment of welding processes","year":2019,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Sustainable Supply Chain Management","field":"Business, Management and Accounting","cited_by":34,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Ontario Tech University","funders":"","keywords":"Welding; Sustainability; Process (computing); Gas tungsten arc welding; Arc welding; Mechanical engineering; Computer science; Engineering","authors":[{"name":"Jaber Jamal","is_ca":false},{"name":"Basil M. Darras","is_ca":false},{"name":"Hossam A. Kishawy","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.00854362266841207,"gpt":0.2275280142396784,"spread":0.2189843915712663,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001260279,0.0002139291,0.000455763,0.0004519751,0.00004147566,0.00003976214,0.0005908232,0.00007232226,0.00002380917],"category_scores_gemma":[0.001270923,0.0001555972,0.0001817854,0.0007429147,0.00003795307,0.0007439539,0.0001889074,0.0003356408,6.01743e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000166321,"about_ca_system_score_gemma":0.00008908262,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009122673,"about_ca_topic_score_gemma":3.061743e-7,"domain_scores_codex":[0.9980904,0.000004383302,0.0007543939,0.0001750513,0.0007383858,0.0002374178],"domain_scores_gemma":[0.9977331,0.0000736547,0.0008103207,0.0001663883,0.001191691,0.00002481219],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000206131,0.0009012172,0.01433275,0.006488855,0.0003420351,0.000006589981,0.000293059,0.7902743,0.006102473,0.1805553,0.0002221242,0.0002752439],"study_design_scores_gemma":[0.02291735,0.005675167,0.2059252,0.009874457,0.002956553,0.0001057221,0.08704188,0.1108166,0.4902571,0.02510885,0.03567673,0.003644474],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9935894,0.00002720539,0.003890619,0.0005345011,0.0006139933,0.0007039138,9.926732e-7,0.00003049948,0.0006088709],"genre_scores_gemma":[0.9992109,0.00000372244,0.0005389343,0.00003619261,0.000164581,0.000007232857,2.815827e-7,0.00001779079,0.00002035987],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6794577,"threshold_uncertainty_score":0.634507,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2057641245","doi":"10.1243/095440503772680640","title":"Finite element simulation of abrasive flow machining","year":2003,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Surface Polishing Techniques","field":"Engineering","cited_by":34,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Finite element method; Machining; Abrasive; Mechanical engineering; Viscoelasticity; Process (computing); Flow (mathematics); Flexibility (engineering); Surface finish; Materials science; Computer science; Engineering drawing; Engineering; Structural engineering; Mechanics; Composite material; Mathematics; Physics","authors":[{"name":"Rishabh Jain","is_ca":true},{"name":"V. K. Jain","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.00969255248631302,"gpt":0.2231210740445812,"spread":0.2134285215582682,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0006016208,0.0002570253,0.0005095479,0.0002451078,0.00002980247,0.00001151873,0.0004023387,0.0001780748,0.00001548035],"category_scores_gemma":[0.001250948,0.0002096846,0.0002528761,0.0002956274,0.00004406148,0.0003968304,0.00004190037,0.0005653235,2.846389e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001226106,"about_ca_system_score_gemma":0.00003428234,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":9.687836e-7,"about_ca_topic_score_gemma":1.721035e-7,"domain_scores_codex":[0.9981933,0.000008184445,0.0009509181,0.0001137799,0.0004964827,0.0002373226],"domain_scores_gemma":[0.9987489,0.0001551008,0.0005082653,0.0001365124,0.0003583464,0.00009285245],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00001857701,0.00002497476,0.00002332249,0.0003394936,0.000106332,6.177215e-7,0.000161887,0.9491257,0.04375852,0.006120314,0.00009705098,0.0002231991],"study_design_scores_gemma":[0.0003537456,0.0000934549,0.0000370788,0.000583714,0.00006816866,0.00001412482,0.00005044169,0.3506326,0.6452281,0.0007536842,0.002026777,0.0001580198],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.1928841,0.0004379916,0.8046935,0.00005394669,0.001175755,0.0002977573,0.00002766168,0.0001398858,0.0002894466],"genre_scores_gemma":[0.9502594,0.00008243184,0.04954815,0.000007425856,0.00005879049,0.000003118538,9.916524e-7,0.00003471942,0.000004938173],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.7573753,"threshold_uncertainty_score":0.8550688,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2099325291","doi":"10.1177/0954405413484725","title":"Factors governing burr formation during high-speed slot milling of wrought aluminum alloys","year":2013,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":33,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Machining; Enhanced Data Rates for GSM Evolution; Mechanical engineering; Materials science; Metallurgy; Process (computing); Aluminium; Engineering drawing; Engineering; Computer science","authors":[{"name":"Seyed Ali Niknam","is_ca":true},{"name":"Victor Songméné","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.007832276111374166,"gpt":0.1832388636520076,"spread":0.1754065875406334,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002271264,0.0002960832,0.0005384319,0.0002250565,0.00005432773,0.00002322391,0.0004134473,0.0001891168,0.000021643],"category_scores_gemma":[0.0003592331,0.0002242706,0.0002297297,0.0003211878,0.00003842114,0.001025857,0.00006079528,0.0004988807,6.618175e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001258621,"about_ca_system_score_gemma":0.0000213484,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006247977,"about_ca_topic_score_gemma":2.558373e-7,"domain_scores_codex":[0.9980992,0.000004030678,0.001006422,0.0001225667,0.0005052965,0.0002624837],"domain_scores_gemma":[0.9986053,0.00005931745,0.0006775845,0.0001092674,0.0004431195,0.0001053773],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000157371,0.00001878378,0.00002060798,0.0008505703,0.00008514793,1.888269e-7,0.0002399577,0.8071942,0.1900313,0.001382402,0.00005329715,0.0001077962],"study_design_scores_gemma":[0.0006042757,0.00009894807,0.0004839412,0.0008884153,0.00009054541,0.00002069792,0.0002042809,0.1873908,0.8095262,0.0001300304,0.0003353646,0.0002264617],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8716102,0.0002841047,0.1266678,0.00004873331,0.001027159,0.0002084704,0.00001299328,0.00007468466,0.00006583305],"genre_scores_gemma":[0.9920645,0.0001880182,0.007531237,0.00000416624,0.000151152,0.000003139952,0.000004253855,0.00004086334,0.00001270566],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6198034,"threshold_uncertainty_score":0.9145491,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2025422358","doi":"10.1243/09544054jem771","title":"Selection of optimal part orientation in fused deposition modelling using swarm intelligence","year":2007,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Additive Manufacturing and 3D Printing Technologies","field":"Engineering","cited_by":33,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Saskatchewan","funders":"","keywords":"Particle swarm optimization; Orientation (vector space); Swarm intelligence; Selection (genetic algorithm); Swarm behaviour; Computer science; Mathematical optimization; Multi-swarm optimization; Genetic algorithm; Algorithm; Minification; Metaheuristic; Artificial intelligence; Mathematics","authors":[{"name":"Apoorva Ghorpade","is_ca":true},{"name":"K. P. Karunakaran","is_ca":false},{"name":"Manoj Kumar Tiwari","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01744948871197433,"gpt":0.2252777509760992,"spread":0.2078282622641249,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007519167,0.00021386,0.0003911158,0.000465571,0.00003204499,0.00001052915,0.0003135059,0.0002194018,0.000004342126],"category_scores_gemma":[0.0002472523,0.0001835164,0.000166983,0.0004659277,0.0000569593,0.0003038909,0.00004755582,0.0005873889,1.574476e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.000175329,"about_ca_system_score_gemma":0.00002536426,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000006320433,"about_ca_topic_score_gemma":7.971076e-7,"domain_scores_codex":[0.9982728,0.000004754027,0.0009743249,0.0001282367,0.0003736948,0.0002461916],"domain_scores_gemma":[0.9990641,0.00007650069,0.0004529335,0.00008247903,0.0002699251,0.00005403889],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00005023229,0.00003260359,0.00003473397,0.0002932724,0.00005503816,0.000001008156,0.0001455274,0.9180511,0.07850537,0.002053282,0.000009096219,0.000768765],"study_design_scores_gemma":[0.000173268,0.00006897458,0.00009294641,0.0006206991,0.00004002947,0.00003119435,0.0001495005,0.2882171,0.7102555,0.0001840721,0.00005560894,0.0001110735],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5688663,0.00004904587,0.4305182,0.000009967483,0.0004014676,0.0000870666,0.000002678703,0.00004737473,0.00001794926],"genre_scores_gemma":[0.9626727,0.00007215951,0.03713545,0.000001925325,0.00009190414,0.000001574203,9.964922e-7,0.00002188319,0.000001469654],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6317501,"threshold_uncertainty_score":0.7483583,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2046576053","doi":"10.1243/0954405042418419","title":"Three-dimensional elastoplastic finite element model for residual stresses in the shot peening process","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Surface Treatment and Residual Stress","field":"Engineering","cited_by":33,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Shot peening; Residual stress; Materials science; Peening; Finite element method; Shot (pellet); Structural engineering; Work hardening; Mechanics; Composite material; Metallurgy; Engineering; Physics; Microstructure","authors":[{"name":"M.S. ElTobgy","is_ca":true},{"name":"Nalini Singhal","is_ca":true},{"name":"M.A. Elbestawi","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01854954383052829,"gpt":0.2290895834811681,"spread":0.2105400396506398,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003975856,0.0002674978,0.0003789912,0.0001719633,0.00005669061,0.0000217253,0.0004767026,0.0001445655,0.000004338266],"category_scores_gemma":[0.0002872326,0.0001645736,0.0001921708,0.00022936,0.00004360763,0.0001970024,0.00003255693,0.0004545617,2.379317e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001046409,"about_ca_system_score_gemma":0.00006612208,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002949809,"about_ca_topic_score_gemma":0.000008491029,"domain_scores_codex":[0.9983497,0.000002852553,0.0006656749,0.0001302782,0.0005663768,0.0002851525],"domain_scores_gemma":[0.9992483,0.000161466,0.0002256235,0.00009129622,0.0002063251,0.00006694848],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00007907733,0.00006935021,0.00003296554,0.0003646322,0.0001044007,0.000001900824,0.0003060175,0.9927636,0.003960276,0.00213266,0.0001256312,0.00005944672],"study_design_scores_gemma":[0.002604423,0.0003273875,0.0002825802,0.001693191,0.0002422626,0.00005640698,0.0002809716,0.6455643,0.3462243,0.002185117,0.0001861649,0.0003529121],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9219327,0.0004543705,0.07607937,0.0003506231,0.0005998619,0.0004645308,0.00003833025,0.0000463799,0.00003385825],"genre_scores_gemma":[0.9948882,0.00003244659,0.004895901,0.00001070531,0.0001204697,0.00001944622,0.000002832595,0.00002594849,0.000003997136],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3471993,"threshold_uncertainty_score":0.6711119,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1978570739","doi":"10.1243/0954405021520391","title":"Tool path error prediction of a five-axis machine tool with geometric errors","year":2002,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Measurement and Metrology Techniques","field":"Engineering","cited_by":32,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Machine tool; Position (finance); CAD; Machining; Kinematics; Computer science; Computer Aided Design; Path (computing); Process (computing); Coordinate-measuring machine; Orientation (vector space); Geometric modeling; Engineering drawing; Algorithm; Engineering; Mathematics; Geometry; Mechanical engineering","authors":[{"name":"Y. A. Mir","is_ca":true},{"name":"J.R.R. Mayer","is_ca":true},{"name":"Clément Fortin","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01302803316556306,"gpt":0.193338699703693,"spread":0.1803106665381299,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004703257,0.0002873038,0.0005745798,0.0005152901,0.0000324082,0.000006798325,0.0003942888,0.000212386,0.00003506428],"category_scores_gemma":[0.0004126035,0.0002030715,0.0002382692,0.0006415776,0.00006751806,0.0003072015,0.00003790562,0.0006047583,4.499557e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001134292,"about_ca_system_score_gemma":0.00001678526,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001430008,"about_ca_topic_score_gemma":2.201559e-7,"domain_scores_codex":[0.9981588,0.000004433302,0.0008477293,0.0001391956,0.0005940778,0.0002557417],"domain_scores_gemma":[0.9989187,0.00004513241,0.0004513142,0.0001451005,0.0003697399,0.00007002895],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001549131,0.0001634766,0.000317626,0.001036188,0.0004714649,0.000003786772,0.0001774698,0.8352106,0.1575838,0.002336395,0.001343144,0.001201097],"study_design_scores_gemma":[0.001880768,0.001011699,0.001670417,0.00126512,0.0003918473,0.0001579082,0.00006022007,0.1041993,0.8845081,0.0002140448,0.004241284,0.0003992298],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8630629,0.001065472,0.1342072,0.0001037346,0.000800081,0.00038292,0.00004667126,0.0001675145,0.0001635852],"genre_scores_gemma":[0.9850548,0.0001852542,0.0145902,0.000009122496,0.00009313347,0.000008842959,0.000001379384,0.00003321567,0.00002403873],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7310113,"threshold_uncertainty_score":0.8281015,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2036443718","doi":"10.1243/09544054jem1693","title":"Replacement time of a cutting tool subject to variable speed","year":2009,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Statistical Process Monitoring","field":"Decision Sciences","cited_by":30,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Reliability (semiconductor); Covariate; Hazard; Representation (politics); Variable (mathematics); Reliability engineering; Computer science; Hazard analysis; Engineering; Mathematics; Machine learning","authors":[{"name":"M Tail","is_ca":true},{"name":"Soumaya Yacout","is_ca":true},{"name":"Marek Balazinski","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.02246410191326038,"gpt":0.2922364696296357,"spread":0.2697723677163753,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":["metaresearch"],"consensus_categories":[],"category_scores_codex":[0.002523319,0.000236022,0.0007254794,0.0003660589,0.00005303243,0.00003600401,0.00101461,0.0001313784,0.0000402956],"category_scores_gemma":[0.01332361,0.000161641,0.000234068,0.0008860675,0.00004397169,0.0004567282,0.0001234877,0.000456432,0.000002816856],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001152927,"about_ca_system_score_gemma":0.00008803546,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001326618,"about_ca_topic_score_gemma":2.799468e-8,"domain_scores_codex":[0.996133,0.00001187895,0.001685011,0.0002455712,0.001632347,0.0002921918],"domain_scores_gemma":[0.9969445,0.0004230704,0.001108768,0.000216838,0.00113748,0.0001693726],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0003304793,0.0001079602,0.00003705928,0.000139448,0.00007855918,0.000002045744,0.000245029,0.6361272,0.3341531,0.0258943,0.0008795107,0.002005324],"study_design_scores_gemma":[0.000885688,0.0008917059,0.0004547451,0.001169577,0.0001080794,0.00006696935,0.0001693484,0.02806168,0.9526766,0.01150364,0.003707583,0.0003044084],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.4863248,0.0001298112,0.5104537,0.0007066965,0.001350501,0.0004375946,0.00002748775,0.00004259904,0.0005267661],"genre_scores_gemma":[0.9429902,0.000006866537,0.056703,0.00003595625,0.0001670774,0.000001073214,2.783208e-7,0.00001272881,0.00008282068],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.6185235,"threshold_uncertainty_score":0.9949876,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2111683180","doi":"10.1177/0954405413477067","title":"An experimental study on the vibration response of a robotic machining system","year":2013,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":28,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"","keywords":"Machining; Vibration; Rigidity (electromagnetism); Surface roughness; SIGNAL (programming language); Stiffness; Root mean square; Mechanical engineering; Surface finish; Aerospace; Machine tool; Robot; Computer science; Engineering; Acoustics; Structural engineering; Materials science; Artificial intelligence; Physics; Composite material","authors":[{"name":"Imed Zaghbani","is_ca":false},{"name":"Victor Songméné","is_ca":true},{"name":"Ilian A. Bonev","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01005398216546402,"gpt":0.221360153681767,"spread":0.211306171516303,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005894873,0.0002127135,0.0003663595,0.0001705853,0.00005483224,0.0000257897,0.0004310911,0.00009871553,0.000009048809],"category_scores_gemma":[0.0002716577,0.0001352437,0.0001288419,0.0002453711,0.00003195669,0.0004518715,0.00003300108,0.0003864898,4.944962e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009399834,"about_ca_system_score_gemma":0.00002462204,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002203858,"about_ca_topic_score_gemma":7.330536e-8,"domain_scores_codex":[0.9985827,0.00001734421,0.0007015388,0.0001101384,0.0004317313,0.0001565117],"domain_scores_gemma":[0.9990333,0.0001090204,0.0003983427,0.0001435568,0.0002427824,0.00007303483],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0000919339,0.00009707878,0.00001238324,0.0001557158,0.00006283746,3.770643e-7,0.0005313726,0.8357815,0.1600836,0.003121115,0.00002463574,0.00003752732],"study_design_scores_gemma":[0.000513816,0.000845868,0.0004177363,0.0006071363,0.00006750662,0.00002626708,0.002203443,0.3879557,0.6071582,0.00003406995,0.00002117436,0.0001491068],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9176784,0.0001026551,0.08107267,0.00006768824,0.0006028633,0.0003751771,0.00000285823,0.00006228889,0.00003542922],"genre_scores_gemma":[0.996572,0.000007027834,0.003294987,0.000007922733,0.000072347,0.00001355055,5.795048e-7,0.00002926579,0.000002365986],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4478258,"threshold_uncertainty_score":0.5515079,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3101618130","doi":"10.1177/0954405420970087","title":"Flow, process forces and strains during Friction Stir Welding: A comprehensive First principle approach","year":2020,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Welding Techniques Analysis","field":"Engineering","cited_by":26,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Toronto Metropolitan University","funders":"","keywords":"Material flow; Friction stir welding; Process (computing); Shear (geology); Mechanics; Flow (mathematics); Welding; Mechanical engineering; Scale (ratio); Rotation (mathematics); Computer science; Materials science; Engineering; Physics; Composite material; Artificial intelligence","authors":[{"name":"Dhruv Bajaj","is_ca":false},{"name":"Arshad Noor Siddiquee","is_ca":false},{"name":"Noor Zaman Khan","is_ca":false},{"name":"A. K. Mukhopadhyay","is_ca":false},{"name":"Sohail M.A.K. Mohammed","is_ca":true},{"name":"D.L. Chen","is_ca":true},{"name":"Namrata Gangil","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01174961355758874,"gpt":0.2139323367248508,"spread":0.2021827231672621,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0001562082,0.0002951822,0.0005545451,0.0001888149,0.0000734955,0.0000243036,0.0004147026,0.0001787677,0.000004908655],"category_scores_gemma":[0.0002518126,0.0002376195,0.0002227794,0.0004317653,0.00005338472,0.000421237,0.00008612987,0.0006195809,1.483565e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008917051,"about_ca_system_score_gemma":0.00001757721,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":7.682067e-7,"about_ca_topic_score_gemma":1.35632e-7,"domain_scores_codex":[0.9984335,0.000003355346,0.0007068466,0.000185921,0.0004291506,0.0002411812],"domain_scores_gemma":[0.9990845,0.00002627605,0.0003483775,0.00009559257,0.0002722777,0.0001729854],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00002638327,0.00001995758,0.0000231886,0.001518576,0.0001770833,0.00000137373,0.0003771063,0.9525829,0.04398541,0.001170018,0.00005650345,0.00006147801],"study_design_scores_gemma":[0.0005965579,0.0001321175,0.000287687,0.0005382331,0.0001861526,0.00008858583,0.0002711661,0.6037082,0.3926911,0.0001545152,0.001060451,0.0002852732],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.7867334,0.0002829428,0.2119763,0.0002073262,0.0002431937,0.0002746524,0.00001561875,0.0001977176,0.00006878023],"genre_scores_gemma":[0.9765359,0.0002121563,0.02304793,0.00001092788,0.0001443649,0.000007627666,0.000001323407,0.00003728438,0.000002474838],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3488747,"threshold_uncertainty_score":0.9689844,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2000417540","doi":"10.1243/095440504323055524","title":"A fuzzy system for chatter suppression in end milling","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":26,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Ottawa","funders":"","keywords":"Control theory (sociology); Fuzzy logic; Vibration; Machining; Controller (irrigation); End milling; Engineering; Control engineering; Computer science; Control (management); Mechanical engineering; Physics; Acoustics; Artificial intelligence","authors":[{"name":"Ming Liang","is_ca":true},{"name":"Tet Yeap","is_ca":true},{"name":"Azriel Hermansyah","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.006742018436838872,"gpt":0.2009785747522755,"spread":0.1942365563154367,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003029089,0.0001972636,0.0003818762,0.0002186235,0.00003003574,0.00001281269,0.0002936734,0.0001577289,0.000001654562],"category_scores_gemma":[0.0001851834,0.0001497458,0.0001691168,0.0002332677,0.00002159124,0.0003165994,0.00002893372,0.0003545838,1.538144e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001604227,"about_ca_system_score_gemma":0.00002919566,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001288038,"about_ca_topic_score_gemma":3.401632e-7,"domain_scores_codex":[0.998748,0.000001714427,0.0006649605,0.0001080626,0.0002675173,0.0002097567],"domain_scores_gemma":[0.9993629,0.00004017677,0.0002624932,0.00007251208,0.0001945296,0.00006739361],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004110045,0.00001922007,0.000005267341,0.001123743,0.00003552299,7.436598e-7,0.0001435707,0.9434494,0.04715722,0.007810912,0.00002643441,0.0001868586],"study_design_scores_gemma":[0.001820537,0.000161607,0.00005123562,0.003182922,0.0000799156,0.0000712593,0.0001733797,0.08318833,0.9089824,0.0009411525,0.001091599,0.0002556413],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.3439218,0.0009091171,0.6513066,0.0002411577,0.002784511,0.0005134687,0.00002635507,0.0001278569,0.0001691248],"genre_scores_gemma":[0.97793,0.00008590223,0.02179578,0.000007139895,0.0001382251,0.000008695209,0.000001668652,0.00003003978,0.000002539709],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.8618252,"threshold_uncertainty_score":0.6106458,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2169782045","doi":"10.1243/095440503772680613","title":"Dynamic distortion measurements during laser forming of Ti’6Al’4V and their comparison with a finite element model","year":2003,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Laser and Thermal Forming Techniques","field":"Engineering","cited_by":26,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of British Columbia","funders":"University of Cambridge; National University of Ireland; Heriot-Watt University","keywords":"Materials science; Laser; Finite element method; Machining; Profilometer; Distortion (music); Optics; Laser Doppler vibrometer; Laser scanning; Perpendicular; Structural engineering; Laser power scaling; Composite material; Surface roughness; Engineering; Geometry; Optoelectronics; Amplifier; Physics","authors":[{"name":"Mark Reeves","is_ca":false},{"name":"Andrew J. Moore","is_ca":false},{"name":"Duncan P. Hand","is_ca":false},{"name":"J.D.C. Jones","is_ca":false},{"name":"J R Cho","is_ca":false},{"name":"Roger C. Reed","is_ca":true},{"name":"Stuart Edwardson","is_ca":false},{"name":"Geoff Dearden","is_ca":false},{"name":"P. French","is_ca":false},{"name":"K. G. Watkins","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01060176804398507,"gpt":0.198558028755506,"spread":0.1879562607115209,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003954514,0.0002401067,0.0004439879,0.0001737231,0.00003914857,0.00001020212,0.0002239951,0.0001116806,0.000002910936],"category_scores_gemma":[0.000103106,0.0001608248,0.0001356806,0.0001595227,0.00003961186,0.0002970073,0.00003247619,0.0003358827,6.369154e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001185303,"about_ca_system_score_gemma":0.000024129,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001134739,"about_ca_topic_score_gemma":9.255089e-7,"domain_scores_codex":[0.9986721,0.000004022686,0.0006682347,0.0001031612,0.0003516324,0.0002008228],"domain_scores_gemma":[0.9992702,0.00002292865,0.0003330657,0.00009878843,0.0001928688,0.00008214459],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00005969521,0.00004527888,0.00009478782,0.0006788867,0.0001670505,3.227094e-7,0.0002670132,0.8840943,0.1133786,0.001058315,0.00001442879,0.0001413324],"study_design_scores_gemma":[0.0005291905,0.0001209634,0.00009570073,0.000736266,0.00007811825,0.00002684032,0.00006943747,0.1788331,0.8190217,0.0002273322,0.0001136289,0.0001477368],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8615372,0.0001894281,0.1377477,0.00001468978,0.0001817014,0.0001785298,0.00001014089,0.00005294958,0.00008763787],"genre_scores_gemma":[0.9928648,0.00006726653,0.007010773,0.000002663119,0.00001498425,0.000005328687,8.876717e-7,0.00002762446,0.000005612767],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.7056431,"threshold_uncertainty_score":0.6558244,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2279091644","doi":"10.1177/0954405415624364","title":"Multi-centric management and optimized allocation of manufacturing resource and capability in cloud manufacturing system","year":2016,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Digital Transformation in Industry","field":"Engineering","cited_by":25,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Western University","funders":"","keywords":"Cloud manufacturing; Distributed manufacturing; Cloud computing; Manufacturing execution system; Computer science; Scheduling (production processes); Computer-integrated manufacturing; Resource allocation; Process development execution system; Integrated Computer-Aided Manufacturing; Distributed computing; Process management; Manufacturing engineering; Engineering; Operations management; Computer network","authors":[{"name":"Ting Lin","is_ca":false},{"name":"Chen Yang","is_ca":true},{"name":"Changhui Zhuang","is_ca":false},{"name":"Yingying Xiao","is_ca":false},{"name":"Fei Tao","is_ca":false},{"name":"Guoqiang Shi","is_ca":false},{"name":"Chao Geng","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.008783335147385518,"gpt":0.1858643030473145,"spread":0.177080967899929,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0005691107,0.0002446353,0.0004751223,0.0003459219,0.00002312759,0.00001696517,0.0002929935,0.0001830449,0.00000288436],"category_scores_gemma":[0.00008668807,0.0001708027,0.0001156202,0.0001457742,0.00007340188,0.0004585183,0.00007127105,0.0003232459,1.805542e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001795085,"about_ca_system_score_gemma":0.00001154236,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002386702,"about_ca_topic_score_gemma":2.476096e-7,"domain_scores_codex":[0.9982449,0.000007950026,0.001006901,0.0001483353,0.0003692548,0.0002226811],"domain_scores_gemma":[0.9992722,0.00008377098,0.0003267135,0.0001221468,0.00008777465,0.0001073669],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0001873405,0.0001079474,0.0001380804,0.006850586,0.0004004646,0.000004768063,0.0004067353,0.9500121,0.03063294,0.006602206,0.00008452321,0.004572248],"study_design_scores_gemma":[0.002504265,0.00006488774,0.002050714,0.003240366,0.0001172868,0.00009266274,0.0004448229,0.01455112,0.975768,0.00006976128,0.0008381351,0.0002580042],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9633766,0.0002349208,0.03512547,0.0001008237,0.0005088385,0.0003595351,0.00001648312,0.00005901083,0.0002182528],"genre_scores_gemma":[0.9943715,0.0001726662,0.00536957,0.000002582988,0.00004494199,0.000006147643,5.086198e-7,0.00002248748,0.00000962223],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.9451351,"threshold_uncertainty_score":0.696513,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2255915017","doi":"10.1177/0954405416629100","title":"Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain","year":2016,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Quality and Supply Management","field":"Business, Management and Accounting","cited_by":22,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"University of Alberta; Bombardier (Canada)","funders":"","keywords":"Kaizen; Organizational culture; Quality management; Business; Supply chain; Process management; Organizational performance; Lean manufacturing; Quality (philosophy); Context (archaeology); Knowledge management; Total quality management; Marketing; Computer science; Service (business); Management","authors":[{"name":"Branislav Tomić","is_ca":true},{"name":"Vesna Spasojević-Brkić","is_ca":false},{"name":"Stanislav Karapetrović","is_ca":true},{"name":"Slobodan Pokrajac","is_ca":false},{"name":"Dragan Milanović","is_ca":false},{"name":"Bojan Babić","is_ca":false},{"name":"Tijana Djurdjevic","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.02540161448561228,"gpt":0.2313879043692441,"spread":0.2059862898836318,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001228977,0.0001719286,0.0003956119,0.0001727982,0.00004506377,0.00003170024,0.0002806301,0.00009892364,0.00001573999],"category_scores_gemma":[0.001410764,0.0001010515,0.00007747939,0.0002912889,0.00009420816,0.0007656997,0.000200451,0.000152185,2.233947e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00003122169,"about_ca_system_score_gemma":0.00002200197,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007443176,"about_ca_topic_score_gemma":4.544045e-7,"domain_scores_codex":[0.9986317,0.000004957712,0.0006849798,0.000132849,0.0003968675,0.000148676],"domain_scores_gemma":[0.9985696,0.00008345985,0.0006668385,0.00008047479,0.000576245,0.00002335484],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"theoretical_or_conceptual","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0004846865,0.0001793899,0.003027325,0.007147909,0.0004505117,0.000001308584,0.0002341608,0.01221449,0.3599316,0.6037351,0.0008125399,0.01178086],"study_design_scores_gemma":[0.007023553,0.0006410956,0.06895305,0.005506799,0.0008284182,0.00007511589,0.0009700358,0.00786823,0.8521873,0.01833903,0.03629688,0.001310523],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9783687,0.0001791672,0.01928671,0.001335041,0.0004479391,0.0002352039,0.00001738018,0.0000220218,0.0001078471],"genre_scores_gemma":[0.9954156,0.0002590981,0.004044042,0.00006691152,0.0001745711,0.000002804358,0.000001548831,0.00001059489,0.0000248643],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5853961,"threshold_uncertainty_score":0.4120761,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2083249006","doi":"10.1177/0954405414541105","title":"Prediction of energy consumption and environmental implications for turning operation using finite element analysis","year":2014,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Energy Efficiency and Management","field":"Energy","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"","keywords":"Machining; Energy consumption; Finite element method; Mechanical engineering; Energy (signal processing); Power (physics); Power consumption; Automotive engineering; Engineering; Structural engineering","authors":[{"name":"Salman Pervaiz","is_ca":false},{"name":"Ibrahim Deiab","is_ca":true},{"name":"Amir Rashid","is_ca":false},{"name":"Mihai Nicolescu","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01473864018475229,"gpt":0.2082682397452591,"spread":0.1935295995605068,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004455679,0.0001258274,0.0002850113,0.0002504463,0.00005783016,0.000009687489,0.0001546481,0.00008787547,0.000007237297],"category_scores_gemma":[0.0001631336,0.00009984749,0.0001796218,0.0001538177,0.00004040859,0.0001774276,0.00004149124,0.0001046097,2.477044e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00006408683,"about_ca_system_score_gemma":0.00001087006,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007284831,"about_ca_topic_score_gemma":0.00000113147,"domain_scores_codex":[0.9989612,0.000007390442,0.0005970428,0.0001140254,0.0002062269,0.0001140887],"domain_scores_gemma":[0.9992073,0.00006670438,0.0005009228,0.00007875673,0.00009772356,0.00004857978],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00002313964,0.0000375188,0.0001246492,0.0001002546,0.0002296013,1.75231e-8,0.00004229829,0.8104051,0.1229264,0.06557314,0.000008184244,0.0005296502],"study_design_scores_gemma":[0.0006111456,0.0001855662,0.001669343,0.0001625113,0.0008034296,0.000006975867,0.0000500438,0.6772892,0.3163701,0.000340514,0.002404257,0.0001069284],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.3492219,0.00009414814,0.6502376,0.00007547217,0.0002149799,0.00009664641,0.00002338301,0.00001021222,0.0000256813],"genre_scores_gemma":[0.9938397,0.0001037755,0.005940635,0.00001206973,0.00007150942,0.000006096436,0.00001095963,0.000009035908,0.000006228065],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.6446178,"threshold_uncertainty_score":0.4071662,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2053240229","doi":"10.1177/0954405414559281","title":"Development of a paper-bag-folding machine using open architecture for adaptability","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Product Development and Customization","field":"Business, Management and Accounting","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Manitoba","funders":"","keywords":"Computer science; Adaptability; Open architecture; Product (mathematics); Product design; Reference architecture; Architecture; Function (biology); Product engineering; Variety (cybernetics); Systems engineering; Software architecture; Software engineering; Engineering; Software; Artificial intelligence; Mathematics","authors":[{"name":"Chao Zhao","is_ca":false},{"name":"Qingjin Peng","is_ca":true},{"name":"Peihua Gu","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.03622622244102469,"gpt":0.2330896588865451,"spread":0.1968634364455204,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001447507,0.0002115445,0.000478052,0.0002447411,0.00006614794,0.00004590471,0.0007132156,0.0001131795,0.000008597603],"category_scores_gemma":[0.000914341,0.0001531902,0.0001568282,0.0003788015,0.00003442614,0.0008818616,0.0002548795,0.0002375625,2.315771e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001021903,"about_ca_system_score_gemma":0.0001594669,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007703263,"about_ca_topic_score_gemma":0.00000153114,"domain_scores_codex":[0.9982887,0.000002547232,0.0008969964,0.0001581341,0.0004601089,0.0001935136],"domain_scores_gemma":[0.9981179,0.00002288234,0.0009616851,0.0001024703,0.0007566224,0.00003838753],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0009927187,0.0003288265,0.0002383932,0.003012896,0.0004629773,8.871569e-7,0.0009115072,0.6567267,0.2819741,0.04915281,0.0008457314,0.005352422],"study_design_scores_gemma":[0.004759514,0.0001240255,0.0005246707,0.002271527,0.0004942592,0.00005457138,0.0006373107,0.06942731,0.8384826,0.004909866,0.07755037,0.0007640104],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.8939709,0.0001903207,0.1028502,0.0004970699,0.001459671,0.0008069403,0.000007608863,0.00003466675,0.0001826792],"genre_scores_gemma":[0.9285396,0.000003046827,0.07113021,0.00002480374,0.0002652174,0.000005784708,0.000003741264,0.00002013434,0.000007512248],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5872994,"threshold_uncertainty_score":0.6246915,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1997107348","doi":"10.1177/2041297510393522","title":"Mechanistic modelling for cutting with serrated end mills – a parametric representation approach","year":2011,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Ontario Tech University","funders":"","keywords":"Serration; Waviness; End mill; Chip; Machining; Enhanced Data Rates for GSM Evolution; Vibration; Structural engineering; Chip formation; Parametric model; End milling; Parametric statistics; Ball (mathematics); Engineering; Spline (mechanical); Mechanical engineering; Geometry; Tool wear; Mathematics; Acoustics; Physics","authors":[{"name":"Ali Hosseini","is_ca":true},{"name":"Behnam Moetakef Imani","is_ca":false},{"name":"Hossam A. Kishawy","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.0228954201809754,"gpt":0.2051439579391848,"spread":0.1822485377582094,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003228211,0.0002352356,0.0004091313,0.0002634939,0.00005072819,0.00001560269,0.0003106784,0.0001453908,0.000004217769],"category_scores_gemma":[0.000272221,0.0001715376,0.0001524083,0.0005392321,0.00002935024,0.0003753635,0.00002480298,0.0003474467,9.525811e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0000627642,"about_ca_system_score_gemma":0.00003045107,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001985526,"about_ca_topic_score_gemma":1.023603e-7,"domain_scores_codex":[0.9986518,0.000003214979,0.0006429175,0.0001497893,0.0003293336,0.0002229306],"domain_scores_gemma":[0.9988599,0.00006290487,0.0004369509,0.00009602603,0.0004596002,0.0000845701],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00009595316,0.00003722599,0.000005522797,0.0006342708,0.0001274993,4.296701e-7,0.0002761937,0.9874316,0.004538252,0.006586538,0.00002121009,0.0002453243],"study_design_scores_gemma":[0.0005451954,0.0001597354,0.00001079215,0.0003493662,0.00015364,0.00004626159,0.0001485497,0.7700521,0.2276511,0.0006157249,0.0001011169,0.0001664125],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.05598264,0.0001802931,0.9429109,0.000009240714,0.0003875766,0.0002857257,0.000009146608,0.00006980067,0.000164652],"genre_scores_gemma":[0.7974519,0.00007641292,0.2023492,0.000003875035,0.00006380743,0.00001130332,0.00000297126,0.00003490055,0.00000571286],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.7414692,"threshold_uncertainty_score":0.6995101,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2028553492","doi":"10.1177/0954405414563420","title":"Belt grinding process with force control system for blade of aero-engine","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Concordia University","funders":"","keywords":"Grinding; Machining; Abrasive; Mechanical engineering; Surface roughness; Process (computing); Grinding wheel; Materials science; Control theory (sociology); Engineering; Computer science; Composite material; Control (management)","authors":[{"name":"Jihao Duan","is_ca":false},{"name":"Youmin Zhang","is_ca":true},{"name":"Yaoyao Shi","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.007690221109199252,"gpt":0.2015268999376881,"spread":0.1938366788284888,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004555804,0.0002727611,0.0006197633,0.0002108429,0.00003420081,0.00001364709,0.0004097527,0.0001635454,0.000001066414],"category_scores_gemma":[0.0003469865,0.000193506,0.0001728205,0.0003336375,0.00004281878,0.0004167117,0.00002262964,0.0003577564,7.790704e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001199638,"about_ca_system_score_gemma":0.00006863939,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":6.800482e-7,"about_ca_topic_score_gemma":2.374207e-7,"domain_scores_codex":[0.9983398,0.000002930792,0.0008006103,0.0001293719,0.0004762194,0.000251044],"domain_scores_gemma":[0.9982681,0.00006833184,0.0005846892,0.0001005891,0.0008334154,0.0001448365],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000188917,0.00002496829,0.00001947279,0.002516446,0.000175881,7.075236e-7,0.0001692007,0.9800996,0.01253072,0.00411285,0.00004772907,0.0001135654],"study_design_scores_gemma":[0.003072353,0.0005471171,0.00002537471,0.002226386,0.0003054463,0.0001525217,0.0004759739,0.3736695,0.618491,0.0002089083,0.0005135722,0.0003118782],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.1902896,0.0003862279,0.8077468,0.00006691718,0.0008364538,0.0004462895,0.00003287907,0.000101956,0.00009298651],"genre_scores_gemma":[0.9816563,0.00002283375,0.01808753,0.000004279085,0.0001550856,0.00001453436,0.000002369448,0.00004676123,0.00001038217],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.7913667,"threshold_uncertainty_score":0.7890944,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3041393592","doi":"10.1177/0954405420937502","title":"On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements","year":2020,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Materials science; Machinability; Silicon carbide; Composite material; Machining; Surface roughness; Ceramic; Metal matrix composite; Composite number; Abrasion (mechanical); Lubrication; Carbide; Tool wear; Metallurgy","authors":[{"name":"Masoud Saberi","is_ca":false},{"name":"Seyed Ali Niknam","is_ca":true},{"name":"Ramin Hashemi","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.007206583587639739,"gpt":0.2089080742922959,"spread":0.2017014907046562,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002985728,0.0002285868,0.0004836079,0.00007587236,0.00002666903,0.00001197661,0.0002532524,0.00009419856,0.000002177735],"category_scores_gemma":[0.0006759953,0.0001485217,0.0001065114,0.0002799993,0.0000413674,0.0002349313,0.00003614966,0.0004530982,5.941186e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004788573,"about_ca_system_score_gemma":0.00002356594,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000005375331,"about_ca_topic_score_gemma":2.715732e-7,"domain_scores_codex":[0.998588,0.000006174937,0.0007270256,0.0001169838,0.0003826548,0.0001792239],"domain_scores_gemma":[0.9990028,0.0002359475,0.0004766706,0.0000791038,0.0001388399,0.00006663833],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.0002108486,0.00001258794,0.00002884796,0.0005670339,0.00009766198,5.76672e-7,0.0002894465,0.821064,0.1747833,0.002913291,0.000005049708,0.00002733495],"study_design_scores_gemma":[0.0005290313,0.0003402049,0.0000402365,0.0009084538,0.0000590233,0.000005136459,0.0001056903,0.4422885,0.55557,0.00004051625,0.00001049615,0.0001026475],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9817437,0.0001553601,0.01757598,0.0001491278,0.0001079872,0.0002127226,0.00001090399,0.00002280302,0.00002140416],"genre_scores_gemma":[0.9875373,0.0001338197,0.0122567,0.00002044325,0.00002205468,0.000001729639,9.397233e-7,0.00002571868,0.000001265988],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.3807867,"threshold_uncertainty_score":0.6056539,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2053479326","doi":"10.1177/0954405412466995","title":"Integration of finite element simulation and intelligent methods for evaluation of thermo-mechanical loads during hard turning process","year":2013,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":20,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"","keywords":"Finite element method; Artificial neural network; Machining; Residual stress; Structural engineering; Mechanical engineering; Process (computing); Genetic algorithm; Materials science; Thermal; Engineering; Computer science; Mathematical optimization; Composite material; Mathematics; Artificial intelligence","authors":[{"name":"Farshid Jafarian","is_ca":false},{"name":"Hossein Amirabadi","is_ca":false},{"name":"Javad Sadri","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.02218582912461053,"gpt":0.303333709739983,"spread":0.2811478806153725,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001051307,0.0002089683,0.0004433321,0.0002203605,0.00003352091,0.00001388784,0.0002181511,0.0001520896,0.00001245286],"category_scores_gemma":[0.001383735,0.0001606433,0.00015348,0.0002353926,0.00003289396,0.0004421001,0.00003478334,0.0002825105,5.622385e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008551287,"about_ca_system_score_gemma":0.00003485659,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001214971,"about_ca_topic_score_gemma":1.368258e-7,"domain_scores_codex":[0.9982761,0.00001221258,0.0009940121,0.0001281015,0.0004324188,0.0001572275],"domain_scores_gemma":[0.9977506,0.0001707903,0.0006919007,0.00008444345,0.001238469,0.00006374464],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00004406579,0.00002386884,0.00000419706,0.0008806516,0.00008026823,1.753346e-8,0.0002743084,0.7859376,0.2069832,0.0008841488,0.00000246488,0.004885214],"study_design_scores_gemma":[0.000412033,0.00009015847,0.00008264729,0.0004730018,0.0001117175,0.000002993077,0.0001012287,0.534271,0.4636798,0.0006789089,0.000020587,0.00007591402],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.3604112,0.0002650799,0.6386143,0.0000247367,0.0002733893,0.0003784921,0.000004549618,0.00001903729,0.000009175464],"genre_scores_gemma":[0.935674,0.00009789322,0.06411497,0.000002633598,0.00005917992,0.00002160971,0.000002823631,0.00002487857,0.000002038436],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.5752627,"threshold_uncertainty_score":0.6550843,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2061646044","doi":"10.1243/0954405041486109","title":"Real-time fault detection and isolation in industrial machines using learning vector quantization","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Fault Detection and Control Systems","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"St. Francis Xavier University","funders":"","keywords":"Learning vector quantization; Fault detection and isolation; Artificial neural network; Artificial intelligence; Fault (geology); Control theory (sociology); Computer science; Transient (computer programming); Support vector machine; Pattern recognition (psychology); Quantization (signal processing); Stuck-at fault; Engineering; Machine learning; Real-time computing; Algorithm","authors":[{"name":"Hosein Marzi","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.009568314998328296,"gpt":0.2026628836226482,"spread":0.1930945686243199,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0004125825,0.0001778072,0.0003476966,0.0003037085,0.00003994459,0.00002194468,0.0001280968,0.0002196425,0.000002965623],"category_scores_gemma":[0.000335248,0.0001469741,0.0001081261,0.0003493033,0.00002191865,0.0003453715,0.00001905259,0.0005046714,2.843876e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001807921,"about_ca_system_score_gemma":0.00002541255,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00002485139,"about_ca_topic_score_gemma":0.000002249895,"domain_scores_codex":[0.9988134,0.00000878669,0.0006498955,0.0000986939,0.0002779845,0.000151274],"domain_scores_gemma":[0.9994484,0.00003072207,0.0002908104,0.00004757413,0.0001199547,0.00006252446],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00003109125,0.00000822189,0.00002655498,0.00008090748,0.00002708139,3.393766e-7,0.00007559041,0.5895308,0.4095998,0.0003526822,0.000001520751,0.0002653777],"study_design_scores_gemma":[0.001253877,0.0001212033,0.0003407232,0.0005925035,0.00005165294,0.00007781945,0.00006816064,0.6867277,0.3103754,0.0000748922,0.0001666735,0.0001493544],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9730717,0.00008088443,0.02565483,0.0000387778,0.0008944687,0.0001701317,0.000002031244,0.00005992459,0.00002726216],"genre_scores_gemma":[0.998973,0.00006318418,0.0007479625,0.000001569618,0.0001865839,0.000002117549,5.035169e-7,0.0000217451,0.000003395104],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.09922437,"threshold_uncertainty_score":0.5993428,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2074758864","doi":"10.1243/095440503771909944","title":"Effect of wall angle on Al 3003 strain hardening for parts formed by computer numerical control incremental forming","year":2003,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Metal Forming Simulation Techniques","field":"Engineering","cited_by":19,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Queen's University","funders":"","keywords":"Necking; Materials science; Strain hardening exponent; Offset (computer science); Ultimate tensile strength; Stress–strain curve; Composite material; Deformation (meteorology); Computer science","authors":[{"name":"E Hagan","is_ca":true},{"name":"J. Jeswiet","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.006051175999912691,"gpt":0.2170907737233109,"spread":0.2110395977233982,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001090561,0.0003080407,0.000687454,0.0002007654,0.00004205763,0.00001532031,0.0003260502,0.0001817923,0.000009921948],"category_scores_gemma":[0.0005406886,0.0002306132,0.0003890196,0.0001724396,0.00003691685,0.000285159,0.00002126015,0.0004096343,2.271685e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001282082,"about_ca_system_score_gemma":0.00002090762,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":6.427303e-7,"about_ca_topic_score_gemma":4.74945e-8,"domain_scores_codex":[0.9981264,0.00001328522,0.000932312,0.0001377494,0.0005003451,0.0002899313],"domain_scores_gemma":[0.9988976,0.0002509154,0.0004393304,0.0001052525,0.0001924319,0.0001145204],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.000370578,0.0001015316,0.0000383856,0.001646337,0.0004772491,0.000001101531,0.0001366995,0.6632955,0.3135945,0.01581715,0.002786238,0.001734659],"study_design_scores_gemma":[0.001619377,0.001037116,0.00001406566,0.0004963441,0.0001179143,0.00002910152,0.000009851567,0.1031796,0.888164,0.0001898516,0.004947199,0.0001954884],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5850499,0.0001146553,0.4125315,0.00006907884,0.001032975,0.0009380429,0.00006791181,0.0001112884,0.0000846379],"genre_scores_gemma":[0.9900739,0.000008483933,0.009755934,0.0000276326,0.00006774447,0.00001789708,0.000003772345,0.0000394962,0.000005187615],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5745695,"threshold_uncertainty_score":0.9404134,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2150000120","doi":"10.1243/09544054jem1787","title":"Evaluation criteria of the constitutive law formulation for the metal-cutting process","year":2010,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"High-Velocity Impact and Material Behavior","field":"Materials Science","cited_by":18,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McGill University","funders":"National Institute of Standards and Technology","keywords":"Constitutive equation; Inconel; Split-Hopkinson pressure bar; Flow stress; Deformation (meteorology); Plasticity; Finite element method; Materials science; Law; Structural engineering; Mechanical engineering; Strain rate; Engineering; Composite material","authors":[{"name":"Bin Shi","is_ca":true},{"name":"Helmi Attia","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.02083735080672475,"gpt":0.2838616541100815,"spread":0.2630243033033567,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.002317132,0.0001811591,0.000350631,0.00006694444,0.0001465707,0.00003765127,0.000627476,0.0001556867,0.00003929709],"category_scores_gemma":[0.001809513,0.00009459903,0.0002463461,0.0001724184,0.0001412801,0.0004610089,0.00006973634,0.0003202666,3.113996e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00005445367,"about_ca_system_score_gemma":0.0001496935,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00000872553,"about_ca_topic_score_gemma":0.000002278129,"domain_scores_codex":[0.9982024,0.00001275702,0.0007241244,0.0001147467,0.0007526345,0.0001933387],"domain_scores_gemma":[0.9975582,0.0001265824,0.0008822667,0.000142505,0.001232983,0.00005745187],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"bench_or_experimental","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006211053,0.00003406633,0.00000536129,0.0001898578,0.00004509962,5.396743e-8,0.0002879242,0.02251673,0.9313144,0.04539983,0.00003589133,0.0001086648],"study_design_scores_gemma":[0.0005642915,0.0000852037,0.0002088377,0.0002703432,0.0004231704,0.0000294414,0.00009499766,0.006927377,0.9896049,0.001077776,0.0006127324,0.0001008505],"study_design_candidate":"bench_or_experimental","study_design_consensus":"bench_or_experimental","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9891745,0.00003559526,0.006292386,0.0003540361,0.003349198,0.000678614,0.00004359381,0.00001622594,0.00005588261],"genre_scores_gemma":[0.9975069,0.000003688142,0.002234031,0.00001701344,0.0002025618,0.00001781863,9.183659e-7,0.00001264082,0.000004451639],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.05829057,"threshold_uncertainty_score":0.3857636,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2766484856","doi":"10.1177/0954405417697352","title":"Association of design and computational fluid dynamics simulation intent in flow control product optimization","year":2017,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Computer Graphics and Visualization Techniques","field":"Computer Science","cited_by":17,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Alberta","funders":"Natural Sciences and Engineering Research Council of Canada; RGL Reservoir Management; China Scholarship Council; University of Alberta; Alberta Innovates - Technology Futures","keywords":"Computational fluid dynamics; Computer science; Solver; Fluid dynamics; Computer Aided Design; Simulation; Computational science; Control engineering; Aerospace engineering; Engineering; Mechanics; Physics","authors":[{"name":"Lei Li","is_ca":true},{"name":"Carlos F. Lange","is_ca":true},{"name":"Yongsheng Ma","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01110541822007462,"gpt":0.2342432589795636,"spread":0.2231378407594889,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009640599,0.0001142597,0.0002814587,0.0002349147,0.00004974203,0.00005000127,0.0004953354,0.0000891113,6.897493e-7],"category_scores_gemma":[0.0008194409,0.00009306341,0.00008763554,0.0001558939,0.0000281266,0.0005498067,0.00008904866,0.0001824292,1.733128e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009519673,"about_ca_system_score_gemma":0.00004233906,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000002135013,"about_ca_topic_score_gemma":2.537827e-7,"domain_scores_codex":[0.9988121,0.00001198195,0.0005870751,0.0001155703,0.0003767815,0.00009648985],"domain_scores_gemma":[0.9980645,0.0001031002,0.0009915157,0.000109549,0.0006930683,0.00003828693],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00001921961,0.00003712111,0.0001873732,0.0000823798,0.00004095489,1.833833e-7,0.00007371664,0.959272,0.0007306478,0.03906497,0.00002125004,0.0004702195],"study_design_scores_gemma":[0.0005147746,0.0000981711,0.001093067,0.0002860411,0.00002374387,0.000005446157,0.000004113658,0.9752676,0.02131636,0.001295325,0.00002024814,0.0000750468],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.01977123,0.00003579253,0.9792377,0.0004113289,0.000326987,0.0001942953,0.000003127982,0.00001573017,0.000003752934],"genre_scores_gemma":[0.9047686,0.00003397194,0.09514881,0.000008330754,0.00003064696,0.000001753659,7.136463e-7,0.000005363136,0.000001796863],"genre_candidate":"methods","genre_consensus":null,"teacher_disagreement_score":0.8849974,"threshold_uncertainty_score":0.3795016,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1969409212","doi":"10.1177/0954405414548464","title":"Surface roughness and energy consumption analysis of conventional and peck drilling approaches","year":2014,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced Machining and Optimization Techniques","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"University of Guelph","funders":"","keywords":"Peck (Imperial); Drilling; Surface roughness; Surface finish; Energy consumption; Engineering; Mechanical engineering; Engineering drawing; Materials science; Composite material; Mathematics; Geometry","authors":[{"name":"Salman Pervaiz","is_ca":false},{"name":"Ibrahim Deiab","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01294571879663127,"gpt":0.2023261153463805,"spread":0.1893803965497492,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003724617,0.0001550077,0.0004431256,0.0002338078,0.00002773342,0.00001059693,0.0001430318,0.0001206039,0.000004318475],"category_scores_gemma":[0.0001499621,0.0001246208,0.0001359035,0.0002446935,0.00006960594,0.0001964617,0.00003479939,0.000205978,1.85615e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00002465652,"about_ca_system_score_gemma":0.00000788427,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001354705,"about_ca_topic_score_gemma":2.384226e-7,"domain_scores_codex":[0.9990284,0.00000572372,0.000526518,0.00009858338,0.0002326816,0.0001080371],"domain_scores_gemma":[0.9993354,0.00007614502,0.000309523,0.000063067,0.0001520233,0.00006385725],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00001653974,0.0000138393,0.0001446137,0.0003098798,0.0003057122,8.21814e-8,0.00006624877,0.957504,0.01209318,0.02908002,0.00001709777,0.0004487895],"study_design_scores_gemma":[0.0003651398,0.00006644172,0.0006863716,0.0003259371,0.0004564349,0.00001571524,0.00003901113,0.7875983,0.2094347,0.0003364737,0.0005227239,0.00015274],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.406177,0.0004921476,0.5929384,0.00003392272,0.0002005341,0.0000443525,0.000009411388,0.00004532083,0.00005891392],"genre_scores_gemma":[0.9830347,0.0004147609,0.01649098,0.000003783794,0.00003300984,0.000001233719,0.000002449199,0.00001362221,0.000005454056],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.5768577,"threshold_uncertainty_score":0.508189,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2000514531","doi":"10.1177/0954405412458741","title":"Experimental and numerical investigation into workpiece surface topology in point grinding","year":2012,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Dalhousie University","funders":"","keywords":"Grinding; Surface roughness; Materials science; Point (geometry); Surface (topology); Grinding wheel; Surface finish; Yield (engineering); Mechanical engineering; Single point; Geometry; Composite material; Mechanics; Engineering; Computer simulation; Physics; Mathematics","authors":[{"name":"Yueming Liu","is_ca":true},{"name":"Yadong Gong","is_ca":false},{"name":"Robert Bauer","is_ca":true},{"name":"Andrew Warkentin","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.007421329839136376,"gpt":0.2156549894105094,"spread":0.208233659571373,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0003351568,0.000169473,0.0003055868,0.0001358915,0.0000273938,0.000009589065,0.0001698676,0.0001345364,0.000005254756],"category_scores_gemma":[0.0002026802,0.0001369392,0.00006909923,0.0002474151,0.00004416755,0.0005291609,0.00005054588,0.0003923366,1.729778e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001048768,"about_ca_system_score_gemma":0.00001381394,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.00000279041,"about_ca_topic_score_gemma":1.356227e-7,"domain_scores_codex":[0.9989981,0.000004535662,0.0005064142,0.00008353447,0.0002038015,0.0002035999],"domain_scores_gemma":[0.999521,0.00004570899,0.000200117,0.00005117637,0.00007483226,0.0001072055],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00002338043,0.00002661756,0.0006360983,0.0002289266,0.00003012473,3.488186e-7,0.0008173272,0.8922778,0.09891893,0.006870464,0.0000295238,0.0001404143],"study_design_scores_gemma":[0.0006363789,0.0001064118,0.001144153,0.000530171,0.00003981486,0.00008347456,0.0004260218,0.08642452,0.9096556,0.0003677035,0.0003576764,0.0002280211],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9191021,0.001193549,0.07860746,0.0001100983,0.000807226,0.0001081792,0.000001184349,0.00003510884,0.00003512434],"genre_scores_gemma":[0.9804662,0.00006575842,0.01933545,0.00001091511,0.00009707238,0.000002128594,6.591267e-7,0.00001923483,0.000002515658],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8107367,"threshold_uncertainty_score":0.558422,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2171493003","doi":"10.1243/0954405011518593","title":"Designing and life cycle engineering—a systematic approach to designing","year":2001,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Design Education and Practice","field":"Engineering","cited_by":16,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Royal Military College of Canada","funders":"","keywords":"Process (computing); Engineering design process; Documentation; Function (biology); Computer science; Designtheory; Design science; Set (abstract data type); Audit; Management science; Systems engineering; Design cycle; Risk analysis (engineering); Software engineering; Engineering; Engineering management; Knowledge management; Mechanical engineering; Human–computer interaction","authors":[{"name":"W. Ernst Eder","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01383111382082542,"gpt":0.209449816234918,"spread":0.1956187024140925,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001054397,0.0003081317,0.0006245039,0.0003728759,0.00004904114,0.0000511263,0.0004593027,0.0001754196,0.000007280351],"category_scores_gemma":[0.001661731,0.0002451576,0.0001722731,0.0005076692,0.00002500055,0.0004739322,0.00005246495,0.0005582228,0.0000015797],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00009706516,"about_ca_system_score_gemma":0.00004964239,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001421184,"about_ca_topic_score_gemma":5.054482e-8,"domain_scores_codex":[0.9981337,0.00001245341,0.000919646,0.0001574232,0.0004787113,0.0002980958],"domain_scores_gemma":[0.9987453,0.0001967762,0.0003376734,0.0001419608,0.0002714751,0.0003068648],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00003237216,0.00005016737,0.00001148563,0.004697609,0.0002058701,0.000001313557,0.0005098599,0.9124214,0.07750317,0.004036193,0.000454902,0.00007564564],"study_design_scores_gemma":[0.001881407,0.0004262709,0.0006382661,0.01187977,0.0009624717,0.001263514,0.00154827,0.4655805,0.5085416,0.0002445395,0.00571385,0.001319531],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.2303225,0.001312586,0.76442,0.0002949735,0.001967266,0.0008163637,0.000005131977,0.0002023129,0.0006589635],"genre_scores_gemma":[0.9572835,0.0001138544,0.04231406,0.00003726058,0.0001739894,0.00001588258,4.590764e-7,0.00004509128,0.00001591182],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.726961,"threshold_uncertainty_score":0.9997236,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W3080976459","doi":"10.1177/0954405420949127","title":"Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis","year":2020,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Concordia University; Polytechnique Montréal; University of British Columbia","funders":"","keywords":"Acoustic emission; SIGNAL (programming language); Time domain; Acoustics; Signal processing; Frequency domain; Sensitivity (control systems); Materials science; Cutting tool; Chip formation; Machining; Computer science; Engineering; Electronic engineering; Tool wear; Physics; Telecommunications","authors":[{"name":"Mohamad Javad Anahid","is_ca":false},{"name":"Hoda Heydarnia","is_ca":true},{"name":"Seyed Ali Niknam","is_ca":true},{"name":"Hedayeh Mehmanparast","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01617615485467971,"gpt":0.2446470182923927,"spread":0.2284708634377129,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.001523701,0.0002210337,0.0005328906,0.0001969032,0.00005467749,0.00001506299,0.0003644729,0.000132142,0.000003467254],"category_scores_gemma":[0.001692875,0.0001380599,0.0002577935,0.0009908287,0.00003799147,0.0002169782,0.00006237427,0.0005683339,6.761949e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00007170677,"about_ca_system_score_gemma":0.00004283788,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000009246871,"about_ca_topic_score_gemma":0.000002292588,"domain_scores_codex":[0.9980962,0.00002852902,0.0009499193,0.0001509989,0.0005727501,0.0002015554],"domain_scores_gemma":[0.9985257,0.0002985047,0.0006432026,0.000113551,0.000336319,0.00008272782],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.00005313844,0.00001435107,0.00002999652,0.0003094745,0.0001993097,4.254723e-7,0.001083742,0.7977476,0.1999515,0.0003572903,0.00001727407,0.0002359785],"study_design_scores_gemma":[0.0003341906,0.000218801,0.0003536112,0.0007073496,0.0004479753,0.00001075931,0.0003949612,0.7635087,0.2336397,0.0001989936,0.00003349618,0.0001513927],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.528567,0.0002298982,0.4701609,0.0004581508,0.0003072334,0.0002306793,0.0000125511,0.00002219157,0.00001142417],"genre_scores_gemma":[0.9672657,0.00005953067,0.0325034,0.00002762166,0.0001165981,0.000004384175,0.000001971696,0.0000198199,9.48529e-7],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.4386987,"threshold_uncertainty_score":0.5629919,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2463123820","doi":"10.1177/0954405416654184","title":"Predicting the remaining useful life of a cutting tool during turning titanium metal matrix composites","year":2016,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Reliability and Maintenance Optimization","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"Polytechnique Montréal","funders":"","keywords":"Machining; Aerospace; Reliability (semiconductor); Computer science; Hazard; Reliability engineering; Titanium alloy; Mechanical engineering; Materials science; Engineering; Composite material","authors":[{"name":"Yasser Shaban","is_ca":false},{"name":"Soumaya Yacout","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.005505999408078238,"gpt":0.1847101631082174,"spread":0.1792041637001391,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0009418025,0.0002579912,0.0005286821,0.0001819271,0.00007693097,0.00002090839,0.0005204837,0.000169874,0.00001131831],"category_scores_gemma":[0.00180046,0.0001469923,0.0003257554,0.0003182031,0.00008514851,0.0005180747,0.0000972972,0.0004969658,4.207957e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001161543,"about_ca_system_score_gemma":0.00004370801,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001682914,"about_ca_topic_score_gemma":1.89867e-7,"domain_scores_codex":[0.9979194,0.00001126718,0.001125046,0.0001404567,0.0005143709,0.0002895003],"domain_scores_gemma":[0.9984918,0.0002125492,0.000650901,0.0001570776,0.0003982806,0.00008943604],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00004344799,0.00001543969,0.0001885697,0.0004956226,0.0001615487,6.031124e-7,0.0002086733,0.6136094,0.3828936,0.00227867,0.0000383194,0.00006611495],"study_design_scores_gemma":[0.0008162687,0.0001109009,0.0008896604,0.002616778,0.0002009738,0.00009317863,0.0002677657,0.08849687,0.9058395,0.0001252277,0.000316914,0.0002259302],"study_design_candidate":"bench_or_experimental","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9510626,0.0003078007,0.04706302,0.0002587912,0.0009159117,0.0002223465,0.00001102247,0.00007772227,0.00008079655],"genre_scores_gemma":[0.9924542,0.0001615411,0.007114933,0.000005731899,0.0002123314,0.000004289575,4.513167e-7,0.00003403459,0.00001254366],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.5251126,"threshold_uncertainty_score":0.5994172,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2282862148","doi":"10.1177/0954405415616060","title":"Age-dependent production and replacement strategies in failure-prone manufacturing systems","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Reliability and Maintenance Optimization","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure; Université du Québec à Montréal","funders":"","keywords":"Context (archaeology); Production (economics); Failure rate; Computer science; Time horizon; Imperfect; Function (biology); Mathematical optimization; Product (mathematics); Operations research; Reliability engineering; Engineering; Economics; Mathematics; Microeconomics","authors":[{"name":"Samir Ouaret","is_ca":true},{"name":"Jean‐Pierre Kenné","is_ca":true},{"name":"Ali Gharbi","is_ca":true},{"name":"Vladimir Polotski","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01036218053523682,"gpt":0.1956469670335178,"spread":0.185284786498281,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0008332527,0.0001988669,0.0003835489,0.0002113413,0.00001947813,0.00003832802,0.0002155063,0.0001466565,0.000001475408],"category_scores_gemma":[0.000361056,0.0001512051,0.00007488411,0.0001561199,0.0000446532,0.0005475255,0.00004454564,0.0004223691,2.042393e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001929045,"about_ca_system_score_gemma":0.00003974214,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000007015822,"about_ca_topic_score_gemma":0.00000265386,"domain_scores_codex":[0.9985454,0.000007032482,0.0007086964,0.0001370926,0.000408868,0.000192886],"domain_scores_gemma":[0.9993259,0.00001901332,0.0002481406,0.0001047989,0.0002032539,0.00009885566],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00005380381,0.00002564442,0.00001687159,0.0006025733,0.00004882972,0.000001600303,0.0002568613,0.9815818,0.01379534,0.003325067,0.0002180632,0.00007351235],"study_design_scores_gemma":[0.002005281,0.0004780228,0.0004800306,0.003387432,0.0001618752,0.0003414015,0.003221003,0.1771673,0.8077142,0.00121747,0.003234111,0.0005919093],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9668494,0.0005421948,0.02945608,0.0002414435,0.002208199,0.0004662335,0.000003903886,0.00007078055,0.0001616974],"genre_scores_gemma":[0.9967564,0.0001701279,0.002910281,0.000002395643,0.0001174843,0.000008107272,7.304866e-7,0.00001899987,0.00001550428],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8044146,"threshold_uncertainty_score":0.6165965,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W1968539478","doi":"10.1243/0954405042418455","title":"Effect of workpiece/fixture dynamics on the machining process output","year":2004,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Manufacturing Process and Optimization","field":"Engineering","cited_by":15,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":false,"ca_venue":false,"about_ca":false},"ca_institutions":"McMaster University","funders":"","keywords":"Fixture; Machining; Interfacing; Process (computing); Engineering; Mechanical engineering; Finite element method; Computer science; Structural engineering","authors":[{"name":"Ibrahim Deiab","is_ca":true},{"name":"M.A. Elbestawi","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.004886052317849697,"gpt":0.19565434185872,"spread":0.1907682895408703,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0007524459,0.0003424162,0.0005692281,0.0002226134,0.00006025992,0.00002362713,0.0006917937,0.0002369749,0.000008909341],"category_scores_gemma":[0.0005456664,0.0002032179,0.0003007486,0.0003627267,0.00006388866,0.0002406642,0.00004827068,0.0008664769,4.884207e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.0001424546,"about_ca_system_score_gemma":0.00004057145,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001601837,"about_ca_topic_score_gemma":3.139075e-7,"domain_scores_codex":[0.9981776,0.00000838824,0.00079052,0.0001416913,0.0006258104,0.0002560074],"domain_scores_gemma":[0.9988517,0.0001346296,0.0005115187,0.0001586742,0.0002517515,0.00009170346],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00009099623,0.00003135695,0.00001599584,0.001196363,0.0001385105,9.108188e-7,0.0001977455,0.9854271,0.001975912,0.01031357,0.00005528607,0.0005562449],"study_design_scores_gemma":[0.001129232,0.0005618098,0.000087352,0.002528516,0.000209903,0.00005943214,0.00008872281,0.1052843,0.8886971,0.0007567558,0.0003025735,0.0002942804],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.9359664,0.0003114196,0.06086802,0.0004323719,0.001487473,0.0004426853,0.00002008475,0.0001032048,0.0003683666],"genre_scores_gemma":[0.9985148,0.00008093303,0.001191102,0.00001559864,0.0001375733,0.000007390903,0.000001847615,0.00004183204,0.000008974885],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.8867213,"threshold_uncertainty_score":0.8286985,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W831360126","doi":"10.1177/0954405415590562","title":"Burr formation and correlation with cutting force and acoustic emission signals","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":true,"ca_fund":true,"ca_venue":false,"about_ca":false},"ca_institutions":"École de Technologie Supérieure","funders":"Natural Sciences and Engineering Research Council of Canada","keywords":"Acoustic emission; SIGNAL (programming language); Machining; Acoustics; Work (physics); Materials science; Mechanical engineering; Engineering; Computer science; Physics","authors":[{"name":"Seyed Ali Niknam","is_ca":true},{"name":"Victor Songméné","is_ca":true}],"retraction":null,"screen_n_in":null,"score":{"opus":0.007593415260273871,"gpt":0.1939225040949486,"spread":0.1863290888346747,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.0002812182,0.00014881,0.0002368206,0.0001169004,0.00003395114,0.00001858912,0.0001015213,0.00009936549,8.694599e-7],"category_scores_gemma":[0.0003008182,0.000103483,0.00003585459,0.0001565705,0.00002750867,0.0005875597,0.0000279068,0.0002647845,4.728535e-8],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00004637075,"about_ca_system_score_gemma":0.00002054076,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":4.359374e-7,"about_ca_topic_score_gemma":9.257364e-8,"domain_scores_codex":[0.9991529,0.000002305483,0.0003919411,0.0000743424,0.0002611666,0.0001173319],"domain_scores_gemma":[0.9992856,0.00003847803,0.0002681534,0.00004084362,0.0002633017,0.0001035872],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"simulation_or_modeling","study_design_scores_codex":[0.0000390573,0.000006500052,0.00001954105,0.0004127655,0.00002588234,3.461995e-7,0.0002447981,0.9762285,0.02147491,0.0009132655,0.00003815424,0.000596296],"study_design_scores_gemma":[0.0007395725,0.0001957249,0.00005975054,0.001003648,0.0001033587,0.000160335,0.0002377521,0.8274561,0.1692235,0.0004109036,0.0002564787,0.0001528172],"study_design_candidate":"simulation_or_modeling","study_design_consensus":"simulation_or_modeling","genre_codex":"methods","genre_gemma":"empirical","genre_scores_codex":[0.3222716,0.0005338432,0.6766599,0.00005778947,0.0002457316,0.0001213613,0.000002420422,0.00004264917,0.00006474422],"genre_scores_gemma":[0.9892374,0.0001444046,0.01052627,0.000005659183,0.00005752197,0.000001729313,0.000001122032,0.00001703121,0.00000883861],"genre_candidate":"empirical","genre_consensus":null,"teacher_disagreement_score":0.6669658,"threshold_uncertainty_score":0.4219914,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null},{"id":"W2264213598","doi":"10.1177/0954405415608601","title":"Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing","year":2015,"lang":"en","type":"article","venue":"Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture","topic":"Advanced machining processes and optimization","field":"Engineering","cited_by":14,"is_retracted":false,"has_abstract":true,"routes":{"ca_aff":false,"ca_fund":false,"ca_venue":false,"about_ca":true},"ca_institutions":"","funders":"National Natural Science Foundation of China","keywords":"Nozzle; Machining; Surface roughness; Mechanical engineering; Thrust; Surface finish; Materials science; Tool path; Cutting tool; Engineering; Composite material","authors":[{"name":"Yukui Cai","is_ca":false},{"name":"Zhanqiang Liu","is_ca":false},{"name":"Zhenyu Shi","is_ca":false},{"name":"Qinghua Song","is_ca":false},{"name":"Yi Wan","is_ca":false}],"retraction":null,"screen_n_in":null,"score":{"opus":0.01160452281656576,"gpt":0.2087076963173076,"spread":0.1971031735007418,"validation_status":"score_only:v0-immature-baseline"},"prediction":{"model_version":"codex-gemma-dda1882f352a","candidate_categories":[],"consensus_categories":[],"category_scores_codex":[0.000519323,0.0002733394,0.0004553621,0.0001754809,0.00005121408,0.00003358199,0.0003030282,0.0001645158,0.000001764518],"category_scores_gemma":[0.0004333821,0.0002174171,0.0001732485,0.0001277002,0.00004431162,0.0004147381,0.00005840168,0.0004258841,1.224076e-7],"about_ca_system_candidate":false,"about_ca_system_consensus":false,"about_ca_system_score_codex":0.00008294692,"about_ca_system_score_gemma":0.00003814221,"about_ca_topic_candidate":false,"about_ca_topic_consensus":false,"about_ca_topic_score_codex":0.000001521431,"about_ca_topic_score_gemma":1.478111e-7,"domain_scores_codex":[0.9985684,0.000003406579,0.0006820148,0.0001524342,0.0003281652,0.000265618],"domain_scores_gemma":[0.999104,0.00009008621,0.0003346777,0.00008866086,0.0002405571,0.0001420827],"domain_codex":null,"domain_gemma":null,"domain_candidate":null,"domain_consensus":null,"study_design_codex":"simulation_or_modeling","study_design_gemma":"bench_or_experimental","study_design_scores_codex":[0.00006908113,0.00001606538,0.00001396179,0.0005392649,0.00009985222,7.981208e-7,0.0002409727,0.9747003,0.02216225,0.001066811,0.0001363196,0.0009543769],"study_design_scores_gemma":[0.001264449,0.0002419048,0.00003940718,0.0007056549,0.0001553862,0.0001007682,0.000185283,0.2899458,0.7037067,0.000618062,0.002712104,0.0003244914],"study_design_candidate":"simulation_or_modeling","study_design_consensus":null,"genre_codex":"empirical","genre_gemma":"empirical","genre_scores_codex":[0.5826406,0.001077833,0.4142747,0.0001074807,0.00143051,0.0003009423,0.00002677034,0.00009113517,0.00005000749],"genre_scores_gemma":[0.8895068,0.0001819859,0.1101123,0.00001377521,0.0001278764,0.000006397076,0.000002541327,0.00004117227,0.000007168328],"genre_candidate":"empirical","genre_consensus":"empirical","teacher_disagreement_score":0.6847545,"threshold_uncertainty_score":0.8866014,"prediction_status":"machine_predicted_unvalidated"},"labels":[],"label_agreement":null}]}