MétaCan
Menu
Back to cohort
Record W2795124267 · doi:10.2118/190279-ms

Performance of Air- Vs. CO2 - Water Injection in a Tight, Light Oil Reservoir: A Laboratory Study

2018· article· en· W2795124267 on OpenAlex

Why this work is in the frame

A frame that forgets how it found something cannot be audited. These are the routes that admitted this work.

affAt least one author lists a Canadian institution in the pinned OpenAlex snapshot.

Bibliographic record

VenueSPE Improved Oil Recovery Conference · 2018
Typearticle
Languageen
FieldEngineering
TopicEnhanced Oil Recovery Techniques
Canadian institutionsUniversity of Calgary
Fundersnot available
KeywordsPetroleum engineeringSecondary air injectionPermeability (electromagnetism)Water injection (oil production)Core (optical fiber)Enhanced oil recoveryWell stimulationRelative permeabilityOil fieldGeologyMaterials scienceGeotechnical engineeringPetroleumReservoir engineeringEngineeringComposite materialWaste managementChemistryPorosity

Abstract

fetched live from OpenAlex

Abstract This paper outlines the results of a comparative study of air- and immiscible CO2 - Water injection based Enhanced Oil Recovery (EOR) processes for a 30+ °API tight, light oil reservoir. This was accomplished by embedding multiple low- permeability core plugs in crushed reservoir core material to create a composite core that was contained in a 1.84 m long core holder. The objectives of this unscaled experimental work were: 1) to understand the suitability of each EOR process for a low permeability reservoir, 2) to define process parameters prior to a potential field pilot, and 3) to understand the relative merits of each EOR process to mobilize light oil from a tight matrix to a fracture network. A detailed experimental investigation was conducted at realistic reservoir conditions to evaluate the feasibility of an air injection-based EOR process. The air injection results were compared with those from an immiscible CO2-Water injection EOR experiment using the same experimental setup and reservoir conditions. Both the air- and CO2 - Water coreflood tests were performed at 10.3 MPa (1500 psig) and 99 °C in a 100 mm diameter, 1.84 m long composite core-holder using 38 mm diameter reservoir core plugs (that represented the matrix) and mounted within the crushed reservoir core material (that represented the fracture); inert helium gas was used to pressure up the core-holder to reservoir pressure. Permeability of the core plugs was from 0.3 to 3 millidarcies, while the permeability of the crushed core material was 1 to 3 Darcies. Air injection was performed as a standard combustion tube test with injection of 2.3 pore volumes (PV) of air to burn 71% of the packed core length (including helium, a total of 4.3 PV of gas injected). The CO2-Water coreflood was performed with the injection of 2.86 PV of CO2 followed by an extended soak period, then a second injection of an additional 2.86 PV of CO2, followed by the injection of 2.6 PV of water. The pre- and post-test core plug measurements of oil saturation show that the air injection process removed significantly larger quantities of hydrocarbons than the immiscible CO2-Water injection process. Relative to the initial conditions of the core plugs for the Air-Injection experiment, 95+ percent of the hydrocarbons were removed; noting that some fraction of original oil was consumed as fuel. In the post-test CO2-Water injection core plugs, oil recovery was in the range of 30 to 55 percent of OOIP. These findings suggest, under an appropriate field design, that both processes have the potential to recover incremental oil from tight reservoirs. However, the air-injection may be better suited to mobilize oil, due to thermal expansion, rather than the CO2 - Waterflood process.

Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.

Full frame distilled prediction

Teacher imitation

Not calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.

metaresearch head score (Codex)0.001
metaresearch head score (Gemma)0.000
Version: codex-gemma-dda1882f352aValidation status: machine_predicted_unvalidated
Candidate categoriesMeta-epidemiology (narrow)
Consensus categoriesnone
DomainCandidate signal: none · Consensus signal: none
Study designCandidate signal: Bench or experimental · Consensus signal: Bench or experimental
GenreCandidate signal: Empirical · Consensus signal: Empirical
Teacher disagreement score0.098
Threshold uncertainty score1.000

Codex and Gemma teacher scores by category

CategoryCodexGemma
Metaresearch0.0010.000
Meta-epidemiology (narrow)0.0000.000
Meta-epidemiology (broad)0.0010.000
Bibliometrics0.0000.001
Science and technology studies0.0000.000
Scholarly communication0.0000.001
Open science0.0000.000
Research integrity0.0000.000
Insufficient payload (model declined to judge)0.0000.000

Machine scores (provisional)

The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.

Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.

Opus teacher head0.009
GPT teacher head0.223
Teacher spread0.214 · how far apart the two teachers sit on this one work
Validation statusscore_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from it