Investigation of pulp dewatering – relating freeness to filtration properties
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
For Sweden the forest sector is of great importance and contributes significantly to the Swedish export.One of the most important products is pulp, which can be used for production of packing material, printing paper and tissue paper.Pulp is also produced in several other countries (e.g.Finland, Canada and Brazil) and the world production is around 180 million tons during 2010.There are several different methods used for pulp production, both mechanical and chemical methods can be used.Among the chemical methods the kraft process is the most common.One important product based on pulp is paper.Paper is formed by dewatering a mix of pulp and additives, to achieve a proper formation the starting pulp needs to be severely diluted, consistency as low as 0.1 % is required to form a paper of a good and even quality.The formation of the paper takes place on a wire section, where large amounts of water are removed by filtration.Further dewatering is then performed in the pressing section and finally the paper is dried.In the industry the dewatering properties of the pulp are measured using simple equipment measuring the freeness of the pulp, normally no filtration properties are measured.The goal for this study has been to investigate pulp dewatering behaviour and relate freeness measurements to measured filtration properties.The fibres used in this study are produced in a kraft process based on softwood material To investigate how the filtration properties change with the dewatering rate, the pulp was treated in a PFI-mill to change the structure on the pulp and thus the dewatering rate.The dewaterbility was measured using two industrial methods Canadian standard freeness (CSF) and Schopper-Riegler (SR).The filtration resistance of the pulp was also measured at 1 bar filtration pressure.A model for CSF from the literature was used to compare a theoretical relation between freeness values and specific filtration resistance and the relation found from the filtration experiments in this study.The range of the freeness value of the processed pulp was from 695 ml to 125 ml for CSF, which corresponds to a specific filtration resistance of 910 9 m/kg to 7.710 12 m/kg at 1 bar filtration pressure.The model for CSF indicated lower filtration resistances than the ones measured in the experiments.An important explanation for this is the difference in filtration pressure and with the following difference in compression of the filter cake.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,002 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,002 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle