Electrochemical characteristics of metal hydride electrodes for nickel/metal hydride rechargeable batteries
Notice bibliographique
Résumé
The electrochemical characteristics of LaNi4.7Al 0.3, LaNi4.7Al0.3 (with Cu-coating), Mm0.95 Ti0.05Ni3.85Co0.45Mn0.35Al 0.35 and Mm(Ni0.71Co0.14Al0.08Mn 0.06)5.02 alloy electrodes are examined in detail. The specific discharge capacity of the cell made using the LaNi4.7Al0.3 , Mm0.95Ti0.05Ni3.85Co0.45Mn 0.35Al0.35 and Mm(Ni0.71Co0.14Al 0.08Mn0.06)5.02 alloys maintain 250 mAh g -1 at 100--120 mA g-1 discharge current density after 20, 40 and 200 cycles respectively. Thus with regard to cycle lifetime the Mm(Ni0.71Co0.14Al0.08Mn 0.06)5.02 and Mm0.95Ti0.05Ni3.85 Co0.45Mn0.35Al0.35 alloys are considerably superior to LaNi4.7Al0.3 alloy. At the same number of cycles, all the electrochemical properties are related to the hydrogen concentration, i.e., depth of discharge (DOD). As the hydrogen concentration decreases, the exchange current density, the apparent activation energy, the hydrogen diffusion coefficient and the symmetry factor increase. The equilibrium potential increases (i.e. becomes more positive) with decreasing hydrogen concentration. Almost all the electrochemical properties are temperature related. As the temperature increases, both the exchange current density and the symmetry factor increase. The specific discharge capacity reaches a maximum value at room temperature for the Mm(Ni0.71Co0.14Al0.08 Mn0.06)5.02 alloy. The equilibrium potential decreases with increasing temperature. With increasing number of cycles, the exchange current density, the ratio of D/a2 ( D = hydrogen diffusivity; a = sphere radius) and the equilibrium potential increase with cycles, stabilizing after 30--40 cycles. Cu-coating of the electrode alloys increases the exchange current density and the high-rate dischargeability of the metal hydride electrodes, and decreases the discharge potential, especially for higher discharge current densities. The discharge potentials for the Cu-coated electrode showed little change with discharge current density differences, indicating the stabilizing effect of Cu-coating on the battery performance. A theoretical treatment is derived to account for the two-phase (alpha-beta) region of pressure-composition (P-C) isotherms of hydrogen-absorbing alloys by considering H-H interaction kinetics. Based on electrochemical reaction kinetics, a theoretical model on the relationship between equilibrium potential and hydrogen concentration is established for the equilibrium discharge process of a MH electrode. The relationship between equilibrium potential of a metal hydride electrode reaction and hydrogen pressure in a gaseous hydrogen environment is also derived and thus, E-C-T curves can be accurately transferred to P-C-T curves and vice versa. These theoretical equations are of particular use in evaluating suitable electrode alloys. A novel and relatively simple electrochemical method, called "Potential Step Chrono-Amperometry (PSCA)" method, is developed to determine the hydrogen diffusion coefficient and its variation with hydrogen concentration. Using this method, the value of the room temperature diffusion coefficient of hydrogen in a LaNi4.7Al0.3 alloy is found to be in the range of 3.1 x 10-14 to 8.6 x 10 -13 m2 s-1, and is comparable with the range of 10-10 to 10-15 m2 s-1 obtained for various AB5-type alloys by other methods.Dept. of Mechanical, Automotive, and Materials Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2002 .F46. Source: Dissertation Abstracts International, Volume: 64-01, Section: B, page: 0366. Adviser: Derek O. Northwood. Thesis (Ph.D.)--University of Windsor (Canada), 2002.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,004 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».