Mobility Control by Polymers Under Bottom-Water Conditions, Experimental Approach
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract In many light or moderately viscous oil reservoirs in Saskatchewan and Alberta, a high water saturation zone ovarying thickness and extent ("bottom-water zone") occurs in communication with the oil zone above. As a result, the primary production period is short, and water coning occurs very early in the life of the reservoir. Later, during the secondary recovery stage, such a zone can have an adverse effect on the waterflood efficiency. This research addresses the problem of waterflooding such reservoirs. This study was directed towards reducing water mobility in the bottom-water zone for more efficient oil displacement. Polymer in various concentrations was used as a blocking agent in the bottom-water zone and as a mobility control agent in the oil zone. Different strategies were investigated to reduce the water mobility in the bottom-water zone and improve the vertical sweep efficiency. The variables examined were: relative water-oil layer thickness, oil viscosity, polymer concentration, injection rate and injection point, as well as the effect of vertical and horizontal injection and production wells. The results showed that oil recovery could be increased by minimizing crossflow between layers by blocking the bottom- water zone completely. It was also found that for an unfavourable mobility ratio, as the injection rate increases the ultimate oil recovery increases. The injection of a polymer solution had a favourable impact on waterflood performance. Moreover, the worse the conventional waterflood performance was, the more effective the polymer was as a mobility and blocking control agent. The use of horizontal wells showed slightly better oil recovery over vertical wells in a conventional waterflood of reservoirs under bottom-water conditions. In addition, some certain well combinations (horizontal production and vertical injection) gave better oil recovery due to the increase in the swept area.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle