Evaluation of the Thin Reservoir Gas-Recharge Process-A Numerical Modelling Study
Notice bibliographique
Résumé
Abstract This paper describes a numerical study evaluating a gas re-injection process as a method of recovering additional oil from thin (less than 5 m) heavy oil reservoirs that have experienced primary production. The reservoir data was provided by Fletcher Challenge Energy Canada Ltd. The target reservoirs were the Lloydminster Dulwich and Buzzard reservoirs. The process concept was to re-energise the reservoir by injecting CH4, CH4/C3H8, or CO2, using a horizontal well, or an existing vertical well plus a wormhole network. The oil recovery process based on foamy oil expansion, oil dilution and viscosity reduction must be employed. Available oil properties and geological data, including relative permeability curves, were evaluated and were used as inputs to the CMG STARS numerical simulator. A satisfactory match of primary production history was used as a template to predict the proposed injection and post-primary production. The oil production for various re-injection options was compared to determine the feasibility of the process. Modest incremental CH4anges in performance were noted for both reservoirs. The numerical simulations predicted the 90/10 C3H8/CH4 mix was the best performer for the Dulwich Reservoir, and the 20/80 C3H8/CH4 mixture was the best solvent of those evaluated for the Buzzard Reservoir. Background And Introduction The objectives of this work were to provide a comparative study of gas recharge options for thin reservoirs of various types, and to provide field support for Fletcher Challenge Energy Canada ltd. (FCEC), by simulating the process based on data from 2 reservoirs. The reservoirs were the Dulwich reservoir, a 10 m thick, 1200 mPa.s oil, 4 Darcy heavy oil reservoir with 26 years of production history (Table 1), and the Buzzard reservoir, a 6 m thick, 1 Darcy reservoir with 10,000 mPa.s oil, with 16 years of production history (Table 2). The numerical simulation work was done using the CMG STARS numerical simulator. PVT calculations were done using CMG's Winprop PVT simulator. The simulation work consisted of simulations to history-match field production data, and comparative simulations of post-primary process options for the Dulwich and Buzzard reservoirs. The simulations also examined parameter sensitivities and a number of implementation options. The simulations were initially done with a 2D radial grid mesh in order to enable the completion of a large number of quick scoping simulations. The scoping simulation results were then used to select simulation cases to be done using a 3D Cartesian grid. The same procedure was followed for both the Dulwich and Buzzard reservoir systems. Mechanisms The gas recharge process is a complex post-primary oil recovery process, depending for its success on the interplay of several mechanisms. Primary production is by foamy oil drive, accompanied in some cases by sand production and wormhole propagation. During gas injection, the gas is distributed in the reservoir by following wormhole paths, and by viscous fingering. Diffusion and hydrodynamic dispersion also play a role in the movement of gas into the reservoir oil. During post-primary production, oil is driven to the producing well by the gas drive, by renewed foamy oil drive, and in some cases by existing natural drives (water drive).
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».