Performance Paradigm Shift: Drilling Vertical and Directional Sections Through Abrasive Formations with Roller Cone Bits
Notice bibliographique
Résumé
Abstract In several Canadian applications, operators have recognized the potential to replace standard roller cone products with a more viable solution that will drive down costs when drilling straight hole and curved sections. In these high-abrasive applications, roller cone bits are preferable because of their ability to increase ROP while maintaining a controlled direction and their relatively low price compared to polycrystalline diamond compact (PDC) bits. Typically, roller cone bits are removed from service because of damage or wear to the bearings or seals, and/or to the cutting structures. However, in these applications, the weakness occurs in the leg section. Historically, wear protection on the leg outside diameter (OD) was achieved by placing tungsten carbide inserts in vulnerable locations. Although this increased wear resistance, the softer portion of the leg OD was still exposed to the damaging effects of hole-wall contact due to the required spacing between the tungsten carbide inserts. Also, the required drill holes for the inserts could become crack-propagation points in certain drilling environments. To improve the durability of the leg while increasing seal and bearing reliability, abrasion-resistant hardfacing was incorporated onto the majority of the leg OD. Roller cone bits with the new hardfacing leg protection were field tested in several operators' wells with excellent results. The hardfacing leg protection proved to reduce OD wear more than TCI leg OD protection, therefore providing improved seal and bearing protection and thus reliability. Additionally, the hardfacing configuration stiffens the leg, increasing durability by reducing flexing and the potential of leg breakage. By preventing early bearing failure due to abrasive leg wear, this innovative technology has caused a performance paradigm shift and has significantly driven down drilling costs and non-productive time. The authors will present several case studies that document how the unique technology has increased the overall leg protection of roller cone products resulting in improved seal protection. This has led to an increase in total footage drilled in some applications and substantial cost savings to operators compared with standard roller cone products in those applications that do not have the new hardfacing.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».