Understanding the Thermo-Hydromechanical Pressurization in Two-Phase (Steam/Water) Flow and Its Application in Low-Permeability Caprock Formations in Steam-Assisted-Gravity-Drainage Projects
Notice bibliographique
Résumé
Summary Steam-assisted gravity drainage (SAGD) is one successful thermal-recovery technique applied in Alberta oil-sand reservoirs. When considering in-situ production from bitumen reservoirs, one must reduce viscosity for the bitumen to flow toward the production well. Steam injection is currently the most promising thermal-recovery method. Although steamflooding has proved to be a commercially viable way to extract bitumen from bitumen reservoirs, caprock integrity and the risk of losing steam containment can be challenging operational problems. Because permeability is low in Albertan thermal-project caprock formations, heating greatly increases the pressure on any water trapped in pores as a result of water thermal expansion. This water also sees a great increase in volume as it flashes to steam, causing a large effective-stress reduction. After this condition is established, pore-pressure increases can lead to caprock shear failure or tensile fracturing, and to subsequent caprock-integrity failure or potential casing failure. It is typically believed that low-permeability caprocks impede the transmission of pore pressure from reservoirs, making them more resistant to shear failure (Collins 2005, 2007). In considering the “thermo-hydromechanical pressurization” physics, low-permeability caprocks are not always more resistant. As the steam chamber rises into the caprock, the heated pore fluids may flash to steam. Consequently, there is a vapor region between the steam-chamber interface penetrated into the caprock and the water region within the caprock which is still at a subcritical state. This study develops equations for fluid-mass and thermal-energy conservation, evaluating the thermo-hydromechanical pressurization in low-permeability caprocks and the flow of steam and water after steam starts to be injected as part of the SAGD process. Calculations are made for both short-term and long-term responses, and evaluated thermal pressurization is compared for caprocks with different stiffness states and with different permeabilities. One can conclude that the stiffer and less permeable the caprock, the greater the thermo-hydromechanical pressurization; and that the application of SAGD can lead to high pore pressure and potentially to caprock shear, and to subsequent steam release to the surface or potential casing failure.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».