Study on Primary and Secondary Heat-Transport Systems for Sodium-Cooled Fast Reactor
Notice bibliographique
Résumé
One of the current engineering challenges is to design next generation (Generation IV) Nuclear Power Plants (NPPs) with significantly higher thermal efficiencies (43–55%) compared to those of current NPPs to match or at least to be close to the thermal efficiencies reached at fossil-fired power plants (55–62%). The Sodium-cooled Fast Reactor (SFR) is one of the six concepts considered under the Generation IV International Forum (GIF) initiative. The BN-600 reactor is a sodium-cooled fast-breeder reactor built at the Beloyarsk NPP in Russia. This concept is the only one from the Generation IV nuclear-power reactors, which is actually in operation (since 1980’s). At the secondary side, it uses a subcritical-pressure Rankine-steam cycle with heat regeneration. The reactor generates electrical power in the amount of 600 MWel. The reactor core dimensions are 0.75 m (height) by 2.06 m (diameter). The UO2 fuel enriched to 17–26% is utilized in the core. There are 2 loops (circuits) for sodium flow. For safety reasons, sodium is used both in the primary and the intermediate circuits. Therefore, a sodium-to-sodium heat exchanger is used to transfer heat from the primary loop to the intermediate one. In this work major parameters of the reactor are listed. The actual scheme of the power-conversion heat-transport system is presented; and the results of the calculation of thermal efficiency of this scheme are analyzed. Details of the heat-transport system, including parameters of the sodium-to-sodium heat exchanger and main coolant pump, are presented. In this paper two possibilities for the SFR in terms of the power-conversion cycle are investigated: 1. a subcritical-pressure Rankine-steam cycle through a heat exchanger (current approach in Russian and Japanese power reactors); 2. a supercritical-pressure CO2 Brayton gas-turbine cycle through a heat exchanger (US approach). With the advent of modern super-alloys, the Rankine-steam cycle has progressed into the supercritical region of the coolant and is generating thermal efficiencies into the mid 50% range. Therefore, the thermal efficiency of a supercritical Rankine-steam cycle is also briefly discussed in this paper. According to GIF, the Brayton gas-turbine cycle is under consideration for future nuclear power reactors. The supercritical-CO2 cycle is a new approach in the Brayton gas-turbine cycle. Therefore, dependence of the thermal efficiency of this SC CO2 cycle on inlet parameters of the gas turbine is also investigated.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».