Experimental Measurement of CO2 Solubility in heavy Oil and Its Diffusion Coefficient calculation at both Static and Dynamic Conditions
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract With population growth, increasing world energy demand and depletion of conventional oil resources, exploiting heavy and extra-heavy oil reservoirs seems one of the promising options in supplying world oil request. However, there are several barriers to the rapid growth of production from such reservoirs. CO2-based enhanced oil recovery (CO2-EOR) techniques are among processes utilized to enhance heavy oil and bitumen production. The design and modeling of CO2-EOR require extensive knowledge about the solubility and diffusivity of CO2 in heavy oil. Hence the primary objective of this research was to identify the main mechanisms involved in the static and dynamic mass transfer of CO2 into the heavy oil systems. This experimental study commenced by allowing CO2 to be in contact at static condition with two different types of heavy oil having viscosities of 5000 and 20000 cP at 298 K. Experiments were conducted at three different initial pressures (1.73, 3.10, 4.49 mPa) and pressure decay concept was used to determine the CO2 solubility for each individual case. The experiments then were extended using a Mini-bench top reactor (PARR-4560) from Parr Instrument Company to repeat similar tests in dynamic condition. Using the reactor's stirrer, the oil was agitated at the velocity of 30 rpm; thereby a semi-flowing condition was generated leading a convection effect in the oil bulk phase. For both dynamic and static conditions, the proper mathematical model were proposed and solved numerically to determine the diffusion coefficient value at each specific operating condition. Results showed that the solubility of CO2 at initial pressure of 1.73 mPa for 5000cP oil is 0.04015, and 0.04195 g/100cc for static and dynamic conditions, respectively. The diffusion coefficient value at static and dynamic condition for the same experimental condition is 4.531×10-10 m/s2 and 4.852×10-10 m/s2. Experimental and mathematical interpretations of other cases showed similar behaviour. From the results at both conditions it can be obtained that the initial pressure has significant effect on reaching the stability condition and longer time is required for higher pressures. Moreover, diffusion coefficient is more sensitive to oil viscosity rather than ultimate solubility value.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle