A Low Temperature Polycondensation for the Preparation of Highly Fluorinated Poly(arylene ether sulfone)s Containing Crosslinkable Pentafluorostyrene Moieties
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract Summary: The polycondensation of pentafluorophenyl sulfone (PPSO) with hexafluorobisphenol A (6F‐BPA), or a model compound, 4‐phenoxylphenol (POPOH), has been studied in order to find optimized reaction conditions for the preparation of fluorinated poly(arylene ether sulfone)s (FPAESs). It was found that PPSO had a very high reactivity in N , N ‐dimethylacetamide (DMAc), allowing the reaction to occur at temperatures as low as 22 °C, even in the absence of any catalyst. This reaction was promoted by the addition of a trace amount of potassium fluoride (KF). Increasing the amount of KF to 1.05 equiv enhanced the conversion and allowed the reaction to be completed in a short time. Under this reaction condition, KF acted as a catalyst to activate the phenol group and also acted as a base to absorb the HF, which was a by‐product of the polycondensation, to produce high molecular weight polymer. The use of calcium hydride (CaH 2 ) instead of KF as a base in this reaction produced a similar effect with a slightly lower reaction rate. Both base systems were also applicable to the reaction of pentafluorostyrene (FSt) with 6F‐BPA. However, a much higher reaction temperature (125 °C) was required due to the low reactivity of FSt. Reacting FSt with an excess of 6F‐BPA produced a mixture of mono‐ and di‐substituted products of FSt with a controllable ratio, which could further react with PPSO to produce a polymer containing crosslinkable FSt moieties both as end‐capping groups and inserting units. This structure allowed the molecular weight of the polymer and the content of FSt to be adjusted independently. Crosslinked films of this polymer demonstrated an excellent processability and performance in waveguide applications, having refractive indices of 1.5061 (TE) and 1.5038 (TM), and a straight waveguide loss of 0.7 dB · cm −1 . Reaction scheme for the preparation of fluorinated poly(arylene ether sulfone)s. magnified image Reaction scheme for the preparation of fluorinated poly(arylene ether sulfone)s.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle