Effect of Channel Length on the Flow Cross-Over Through Gas Diffusion Layer and Pressure Distribution in a PEM Fuel Cell Flow Plate With Serpentine Channels
Notice bibliographique
Résumé
A numerical model was developed to study the effects of channel length and bend shape on the flow cross-over through the porous gas diffusion layer (GDL) and the pressure distribution in a PEM fuel cell flow plate with a serpentine channel flow system. Usually, on the cathode side of a PEM fuel cell, air flow through a flow plate with serpentine channels with certain lengths, to supply the oxygen to the catalyst layer for the chemical reaction. There is a porous GDL between the flow plate and the catalyst layer. Flow cross-over of air through the porous GDL from one part of the channel to another can occur because of the pressure differences existing between different parts of the channel. This cross-over causes the flow rate through the channel to vary with distance along the channel, and also has an influence on the pressure distribution through the plate and, eventually, the fuel cell performance. For the conventional channel flow, the pressure drop is proportional to the channel length. To study the importance of this channel length effect on the PEM fuel cell flow field with cross-over, the pressure distribution and flow rate variation along the channels have been examined by numerically solving for the flow through the plate and porous GDL assembly. Attention has been given here to serpentine channel flow systems with single and parallel channel patterns and with different numbers of passes. A 3-D, single-phase flow has been considered. It was assumed that the flow is steady and incompressible, and the flow through the porous diffusion layer can be described using the Darcy law. The governing equations have been written in dimensionless form using the channel width as the length scale and the mean velocity at the channel inlet as the velocity scale. The resulting set of dimensionless governing equations has been solved using the commercial finite element method (FEM) software package, FIDAP. The solution was obtained by simultaneously solving the equations for the flow in the channels and for the flow through the porous GDL. The solution depends on the following parameters, (1) the Reynolds number, Re, based on the channel width and on the mean velocity at the channel inlet, (2) the dimensionless GDL permeability, (3) the dimensionless channel length, (4) the bend shape, and (5) channel configurations. The main emphasis of this study was on the effect of channel length. The numerical results obtained indicate that the channel length has a significant effect on the flow cross-over through porous GDL and the pressure distribution in the flow plate.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».