A Numerical Study of Channel-to-Channel Flow Cross-Over Through the Gas Diffusion Layer in a PEM Fuel Cell Type Flow System Using a Sepentine Flow Channel With a Trapezoidal Cross-Sectional Shape
Notice bibliographique
Résumé
On the cathode side of a PEM fuel cell, the air usually flows through serpentine channels in a flow plate, these channels usually having a square cross-sectional shape. There is a porous diffusion layer adjacent to the flow plate. Flow cross-over of air through the porous diffusion layer from one part of the channel to another can occur. This flow cross-over is a result of the pressure differences between different parts of the channel and it causes the flow rate through the channel to vary with the distance along the channel. A numerical study of the pressure distribution and flow cross-over through the gas diffusion layer (GDL) in a PEMFC flow plate system that uses a serpentine channel system has therefore been undertaken for the case where the channel has a trapezoidal cross-sectional shape. The purpose of the present work was to study the effect of the flow plate geometry on the basic fluid flow through the plate. The flow has been assumed to be three-dimensional, steady, incompressible and single-phase. The flow through the porous diffusion layer has been described using the Darcy model. The dimensionless governing equations have been written in dimensionless form and solved by using the commercial CFD solver, FIDAP. The solution depends on (1) the Reynolds number, Re, based on the mean channel width and on the mean velocity at the channel inlet, (2) the gas Prandtl number, Pr, a value of 0.7 being assumed here, (3) the permeability of the diffusion layer, (4) the ratio, R, of the length of the wide side of the trapezoidal channel to the length of the narrow side of the channel. Values of Re between 50 and 200 and of R between 1 and 7 have been considered. The results obtained indicate that: (1) the width ratio, R, of the trapezoidal channel cross-sectional shape has a significant effect on the flow cross-over As R increases the flow cross-over through GDL increases, (2) The ratio R also has a significant effect on the pressure variation in the flow field for both cross-over and no cross-over cases. (3) Flow cross-over has a significant influence on the pressure variation through the channel, tending to decrease the pressure drop across the channel. (4) An increase in Re can lead to a slight increase in the flow cross-over.Copyright © 2005 by ASME
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».