A Deformation-Dependent Model for Permeability Changes in Oil Sand due to Shear Dilation
Notice bibliographique
Résumé
Abstract Thermal recovery processes such as cyclic steam stimulation and steam assisted gravity drainage induce significant shear dilation in oil sand formations. Shear dilation deformation results in an increase in pore volume, thereby enhancing permeability. In previous studies, it was assumed that the change in absolute permeability is a function of porosity or volumetic strain, which is, in turn, a function of mean or minimum effective stress. In such conventional semi-empirical correlations (e.g., the Kozeny- Carman equation), the changes in permeability are equal in all directions even though the changes in strains are different in each direction. This paper proposes a new deformation dependent permeability model for the shear dilation of oil sands. This model is based on a granular interaction approach. The fundamental approach accounts for how pore throat areas along flow channels and grain contacts change with shear dilation. This allows one to quantify the evolution of changes in permeability in one direction under continuous shearing. The model explicitly states that the permeability changes are highly anisotropic, dependent on the induced principal strains. Comparison with experimental data is presented to show the validity of the proposed model. In addition, the proposed model is extended and formulated in a generalized 3D tensor notation so that it can be implemented into existing reservoir or coupled geomechanics-reservoir simulators. Introduction Conventional numerical modelling of thermal recovery processes has been historically carried out in the area of reservoir simulation, which concentrates on modelling multiphase flow and heat transfer in porous media. However, awareness of the geotechnical aspects of reservoir engineering problems is growing, particularly for uncemented deformable oil sands(1, 2). Oil sands have an interlocked granular structure and display a large degree of dilation when loaded to failure(3). During a steam assisted gravity drainage (SAGD) process, the oil sands formation encounters shear dilation, affecting formation absolute permeability. The absolute permeability of the reservoir controls the drainage of fluids from the steam front, and thus the frontal stream advance rate and the bitumen production rate. It is one of the most important parameters governing the performance of the SAGD process(4, 5). In the literature(5-7), the permeability change of oil sands subjected to deformation (or stress) changes is usually determined as a function of a state variable, which relates to average volumetric behaviour, such as void ratio (or porosity). The concept of the Kozeny- Carman equation(8) is commonly used in correlating the change in permeability with the change in porosity. This type of correlation assumes the permeability changes are equal in all directions, and does not reflect the directional behaviour of permeability changes. Sometimes, the permeability functions for horizontal and vertical permeabilities have to be adjusted to different terms to achieve a good history-matching simulation of field production data. Theoretical and laboratory works are required to model the permeability change in three dimensions. The objective of this paper is to develop a model for oil sands, which quantifies the changes of permeability when the material experiences volumetric dilation. First, deformation-permeability relationships are derived analytically for an idealized packing of uniform spheres.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,003 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».