Broadband energy harvesting through a piezoelectric beam subjected to dynamic compressive loading
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This paper investigates the design and analysis of a broadband piezoelectric energy harvester that uses a simply supported piezoelectric beam compressed by dynamic loading. The beam is restrained at one end and carries a moving mass at the other end where a magnetic force is applied axially. Taking advantage of the flexibility of the slender beam and the nonlinearity of the magnetic force, the design aims to enhance the harvester's functionality with a broad frequency bandwidth. Both theoretical and experimental investigations are performed in this study over a range of excitation frequencies. Specifically, the electromechanical model of the harvester is analytically developed by means of the energy-based method and the extended Hamilton's principle. Using the derived model, a parametric study is carried out to obtain the harvester's voltage response under parametric excitations. Furthermore, the effects of various parameters on the harvester's voltage response are examined. A prototype harvester is fabricated and experimentally tested. The theoretical model is validated against experimental data to confirm the harvester's nonlinear response behaviors and enhanced capabilities. Both simulation and experiment illustrate that the harvester exhibits a softening nonlinearity and hence a broad frequency bandwidth with large-amplitude voltage response. It is also shown from numerical simulations that the harvester's performance can be further improved by properly selecting the end mass and reducing the mechanical damping. The present findings demonstrate that dynamic compressive loadings can be successfully utilized to increase the harvester's voltage output and frequency bandwidth.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle