Coupled Numerical Simulation of Reservoir Flow With Formation Plugging
Notice bibliographique
Résumé
Abstract Permeability decline occurs during injection of produced water and seawater, resulting in injectivity decline and significant cost increases in waterflooding projects. It is necessary to have a reliable model to predict injectivity decline for preventive water treatment and waterflood design purposes. A classical deep bed filtration (DBF) model has been widely used to predict the injectivity decline. According to this model the injectivity decline can be characterized by two empirical parameters: filtration coefficient λ, and formation damage coefficient ®. Different methodologies developed to extract these parameters involve expensive and difficult concentration measurements, laboratory scaled pressure drop measurements (not representative of real reservoir), and simplifying assumptions of analytical solutions. A simple empirical velocity-based damage model proposed by Bachman et al. (SPE 79695) is adopted in this work, and extended to multi-dimensional flow. This model is then compared to the deep bed filtration-based model. The advantage of the empirical model is that it can be easily tuned to either field or laboratory data, and can be easily implemented in reservoir simulators. The paper presents the formulation and numerical implementation of the two coupled reservoir flow and damage models. Different methods of implementing the velocity-based model in multidimensional flow are presented and evaluated. The comparison with the DBF model shows that the two models yield similar damage characteristics. Finally, application of the model to analysis of the published data in offshore Golf of Mexico is presented. The relationship between the parameters of the two different approaches is validated for these case studies. Introduction As oil fields mature, the volumes of produced water requiring disposal increase significantly. Re-injecting produced water is an attractive, environmentally sound solution to water disposal problems but entails the risk of poor injectivity. Produced water normally contains varying concentrations of particles, which have a direct effect on the injectivity decline (injectivity index is defined as the ratio of the injection rate to the given pressure head). They can cause equivalent skins on the order of 200 or more. It has been shown that declining well injectivity is the major cost-increasing item in the case of re-injection. Standard formulation of damage mechanics is based on the classical deep bed filtration (concentration-based) model (DBF). Injectivity decline is characterized by two parameters: filtration coefficient λ, and formation damage coefficient?. Methodologies developed to determine these parameters involve expensive and difficult measurements, scaling problems, and simplifying assumptions of analytical solutions. Moreover, the model is not easily implemented in reservoir simulators. Bachman et al.(14) proposed an empirical velocity-based damage model that could be easily tuned to field or laboratory data, and easily implemented in reservoir simulators. However, the model was formulated in 1-D and its extension (and validity) in multidimensional flow was not shown. This paper presents development of a 2D formulation and numerical implementation of permeability impairment based on the velocity-based model. The results will be compared with classical DBF approach to validate the result against deep bed filtration theory. Application of the model to the published data from offshore Golf of Mexico is presented.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».