Waste Disposal Into the Deep Underground - Technical And Economical Considerations For Applications Outside The Oil Industry
Notice bibliographique
Résumé
Abstract For about 25 years the oil industry has disposed of waste into the deep underground (drill cuttings, mud chemicals, sludge, produced water and sand, crude-contaminated soils, etc.). Small-scale annular injection projects are typical for disposing of the waste produced in single drilling campaigns, but large-scale projects are also ongoing using dedicated injection sites, where oil companies are able to dispose up to hundreds of thousands of tonnes of waste every year. Most commonly, the technique consists of preparing a slurry comprising waste liquid and finely divided solid waste grains, and injecting it through wells into the deep underground. To ensure injectivity, the operations take place at pressures sufficient to induce hydraulic fractures in the target rock. Once injection ceases, pressures decline, fractures close, solid waste particles remain entrapped by stress, and the excess liquid dissipates through porous media flow. There are two critical feasibility factors. The first is geological suitability: injection should take place in tectonically passive regions into sedimentary strata of high porosity and permeability. The presence of impermeable strata above the injection zone will protect shallow groundwater from contamination with the injected fluids. The second factor is that the injection process is executed with advanced monitoring techniques and periodic well assessment to provide accurate and updated operational control while establishing best operating parameters, minimizing environmental risk, and complying with regulatory needs. This paper discusses these aspects along with suggested guidelines in the context of several field case histories. If such critical factors are resolved satisfactorily, wastes become isolated permanently with minimum risk to potable water sources, surface watercourses, or the sea. Furthermore, organic waste injection (e.g. human and animal biosolids, organic refuse) will also reduce CO2 emissions, and most of the carbon remains deep underground in solid form, the most secure approach to sequestration. Deep waste injection is seldom used outside the oil industry; however, there are strong economic and environmental incentives for application to other waste streams. The most desirable stratigraphic conditions are typical of hydrocarbon-containing sedimentary basins where impermeable layers overlying porous and permeable strata have kept hydrocarbons in place for millions of years. Thus, primary candidate sites are likely to be old depleted reservoirs. Also, in a hydrocarbon province, stratigraphic data, operational experience, and technological expertise are available for its implementation. This paper focuses on deep waste injection potential in new geographical areas, analyzing it as a disposal technique for different municipal and industrial waste streams. Although many of the technical and social issues are valid worldwide, the situation in Europe deserves particular attention:• The environmental pressure on most European countries is large and increasing because of many densely-populated and heavily industrialized areas;• Public awareness of the need to protect the environment has constantly been growing, driving the European Union toward approval of stricter regulations;• Many geographical regions corresponding to the major sedimentary basins and flatlands in Europe are likely to be suitable;• It is cost-effective compared to current disposal techniques used in Europe for most municipal and industrial waste streams;• Despite no specific country-scale regulations to date, European Union law already includes deep underground injection as a permitted waste disposal method.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».