A Study of Acoustic Wave Propagation inside Cemented Production Tubings
Notice bibliographique
Résumé
Abstract Well operators use advanced downhole telemetry systems to monitor the flow rate, temperature, and pressure inside the well. The wired telemetry tools are currently popular in the industry although these tools have cost, maintenance, and reliability issues. Acoustic waves that propagate by vibrating the pipe's body inside the well were recently considered as an alternative technology. However, the bottom segment of the production tubing is encased in concrete in many wells; a previous work showed that concrete segments attenuate the acoustic waves to impractical levels, which limits the applications of this mode of propagation. As an alternative to vibrating the tubing body when there is a concrete segment over the pipe, this work investigates the use of the production tubing's interior as a communication medium for the acoustic waves. A testbed was designed using five segments of 7-inch production tubing to form a pipe string, a speaker to generate the acoustic waves, and a directive microphone to receive the acoustic waves propagating inside the pipe string. To study the effect of cemented pipes on acoustical wave propagation, the third pipe segment was encased in concrete. Input frequencies from 100 Hz to 2000 Hz were investigated; wave measurements were taken along the pipe string, and measurements were analyzed to extract information about the behavior of the acoustic channel. This work shows that acoustic waves are not affected by the presence of the concrete segment. Low-frequency acoustic waves experience very little attenuation as they propagate through the interior of the pipe string, signal dispersion is not an issue for most frequencies, and delay spread measures increase as the acoustic waves propagate down the pipe. This work advises that acoustic-wave technology can be a promising cost-effective and reliable solution for wireless downhole communication systems. Technical contributions include: characterizing the channel response to different input frequencies along the pipe string, investigating the power spectral density and signal-to-noise ratio measures, and studying the time dispersion parameters of the channel. 1. Introduction Wireless communications is a discipline that has widespread applications in different industrial areas. The gas and oil industry is one of the recently growing areas for potential applications of wireless communications technologies. Such technologies can be used for addressing issues in exploration, drilling, and production stages. For instance, well performance and production efficiency can be enhanced by having a means to communicate between surface and downhole tools. Readings of typical well data like oil/gas flow rate, pressure, and temperature can be helpful in monitoring the performance of the wells.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».