Spherical imaging array based on bioelectronic photoreceptors
Notice bibliographique
Résumé
The performance of wide field-of-view (FOV) and omni-directional sensors are often limited by the complex optics used to project three-dimensional world points onto the planar surface of a charged-couple device (CCD) or CMOS array. Recent advances in the design and development of a spherical imaging system that exploits the fast photoelectric signals generated by dried bacteriorhodopsin (bR) films are described in this paper. The bendable, lightweight and durable bR-based photocell array is manufactured on an indium-tin-oxide (ITO) coated plastic film using Electrophoretic Sedimentation technique (EPS). The effective sensing area of each pixel in the preliminary prototype is 2x2 mm2, separated by 1mm and arranged in a 4x4 array. When exposed to light, the differential response characteristic is attributed to charge displacement and recombination within the bR molecule, as well as loading effects of the attached amplifier. The peak spectral response occurs at 568nm and is linear over the tested light power range of 200μW to 12mW. Response remains linear at the other tested wavelengths, but at reduced signal amplitude. Excess material between the bR sensing elements can be cut from the plastic substrate to increase structure flexibility and permit the array of photodetectors to be wrapped around the exterior, or adhered to the interior, of a sphere.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».