Experimental Study of Natural Convective Heat Transfer From an Inclined Isothermal Square Cylinder With an Exposed Top Surface Mounted on a Flat Adiabatic Base
Notice bibliographique
Résumé
Natural convective heat transfer rates from inclined cylinders with a square cross-section and which has an exposed top surface have been experimentally studied. When relatively small square cylinders with exposed top surfaces inclined at an angle to the vertical are used, the inclination angle to the vertical has, in general, a considerable effect on the magnitude of the mean heat transfer rate and on the nature of the flow over the surfaces that make up the cylinder. In the situation here considered the cylinder is mounted on a large flat essentially adiabatic surface with the other cylinder surfaces exposed to the surrounding air and with the cylinder, in general, inclined to the vertical at angles between vertically upwards and vertically downwards. The situation considered is an approximate model of that which occurs in some electrical and electronic component cooling problems. The cross-sectional size-to-height ratio of the square cylinders used in the present study was comparatively small, i.e. the square cylinders were short, the width, w, of the square cylinders being 25.4 mm and the width-to-height ratios of between 1 and 0.25 being used. One of the main aims of the present work was to determine how the cross-sectional size-to-height ratio of the square cylinder, i.e., w/h, influences the mean heat transfer rate from the cylinder at various angles of inclination between vertically upwards and vertically downwards. The heat transfer rates were determined by the transient method, this basically involving heating the model and then measuring its temperature-time variation while it cooled, the tests being carried out inside a large enclosure. Tests were carried out in air with all models at various angles of inclination to the vertical between vertically upwards and vertically downwards. The effects of w/h, Rayleigh number, Ra, and angle of inclination, φ, on the mean Nusselt number, Nu for the entire cylinder have thus been studied. The Rayleigh number, Ra, based on the cylinder height, h, was between approximately 1E4 and 5E6. The experimental results have been compared with the results obtained in an earlier numerical study.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».