Aerodynamic optimization of Laval nozzle flow with shocks: Numerical investigation of active/passive shock control via expansion fans
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract Instantaneous ignition in the supersonic part of a 3‐D Laval nozzle realized by a well‐defined sudden temperature rise across a normal shock is the focus of the present study. Unfortunately, the divergence of the supersonic nozzle part is necessarily smooth. Therefore, the turbulent boundary layer ahead of the shock is thick and causes substantial shock/boundary layer interactions. The non‐homogeneous temperature increase across the shock, caused by the boundary layer thickening ahead of the shock and the resulting pre‐compression prevents the quasi 1‐D evolution of the flow downstream. Additionally, due to multiple boundary layer interactions the single shock disintegrates into a so called pseudo‐shock system ; i.e., into a sequence of periodic weak compression and expansion regions. To avoid this drawback and to establish homogeneous thermodynamic conditions throughout the entire cross section and flow domain downstream of the shock we apply active and passive control techniques in the area of shock boundary layer interaction. The central idea of the control technique described below is compensation of the thickening of the boundary layer by quantitative appropriate inverse effects, i.e. by superimposing negative and positive pressure gradients in the near wall region close to the shock position. In a first approach the additional expansion fan is created by active suction slots in flow direction and through all sidewalls of the 3‐D nozzle. The resulting shock remains straight with exception of the near wall region. Suction creates an effective concave wall curvature. In supersonic flow the resulting local expansion tends to compensate the pre‐compression. Because suction in high temperature environment is difficult to realize, we alter the wall curvature to create a negative bump with the same effect on the effective wall curvature. Under these conditions a normal shock in the channel core could be established without active or passive suction. The paper compares these active/passive control techniques with the unmodified setup. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle