Effect of mixing protocol on compatibilized polymer blend morphology
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract We investigated the effect of mixing protocol on the morphology of compatibilized polymer blends made with premade compatibilizer and reactively formed in‐situ compatibilizer in a custom‐built miniature mixer Alberta Polymer Asymmetric Minimixer (APAM). The compatibilized blends show a finer morphology than uncompatibilized blends if the polymers are mixed together in the dry state and then fed into the mixer. It is found that premelting one polymer, and premixing polymers and compatibilizer, both greatly affect the compatibilized blends' morphology. The effects are complex since the dispersed phase particle size and distribution of the compatibilized blends may be smaller or larger when compared with the uncompatibilized system, depending on the material's physical and chemical properties; for example, diblock molecular weight or the preference of copolymer to migrate to a particular phase can change the final morphology. Good mobility of the copolymer to reach the interface is crucial to obtain a finer morphology. Micelles are observed when a high molecular weight diblock copolymer P(S‐ b ‐MMA) is used for a PS/PMMA blend. Because of its enhanced mobility, no micelles are found for a low molecular weight diblock copolymer P(S‐ b ‐MMA) in a PS/PMMA blend. For PS/PE/P(S‐ b ‐E) blends, finer morphology is obtained when P(S‐ b ‐E) is first precompounded with PS. Because the block copolymer prefers the PE phase, if the P(S‐ b ‐E) block copolymer is compounded with PE first, some remains inside the PE phase and does not compatibilize the interface. In the case of reactive blend PSOX/PEMA, premelting and holding the polymers at high temperature for 5 min decreases final dispersed phase particle size; however, premelting and holding for 10 min coarsens the morphology. POLYM. ENG. SCI. 46:691–702, 2006. © 2006 Society of Plastics Engineers.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle