A Critical Review of Hybrid Steam-Solvent Processes to Recover Heavy Oil
Notice bibliographique
Résumé
Abstract Steam-Assisted Gravity Drainage (SAGD) is the main commercial technology used for in-situ recovery of Canadian heavy oil and Bitumen. It is commercially proven and delivers high oil rates and high ultimate recoveries. One of the long-term concerns with the SAGD process is high energy intensity and related environmental impacts. Hybrid processes have been developed to take partial advantage of steam and solvent processes while introducing a more efficient and more economically viable recovery methods. Several processes such as Propane-SAGD, Expanding Solvent-SAGD (ES-SAGD), Solvent-Aided Process (SAP), Liquid Addition to Steam to Enhance Recovery (LASER) and Steam-Alternating-Solvent (SAS) were proposed; some of them currently under pilot test. Hybrid steam-solvent processes aim to accelerate oil production rate with lower cost than SAGD and also increase the ultimate oil recovery. Despite remarkable amount of laboratory and computational studies on these processes, there was no extensive critical review of the knowledge obtained for more than a decade. The current level of understanding of the hybrid processes and knowledge around the fundamental physics and mechanisms involved are not fully satisfactory. We believe that a critical review of the status of the hybrid processes will fill the gap by shedding the light on the deficiencies and the limitations of the process, further development areas, and new research topics. Analytical, numerical simulations, laboratory modeling efforts along with pilot test results are summarized. In addition, the main technical challenges of different aspects of hybrid steam-solvent processes are analyzed at different levels. In this paper, special attention is given to a) The effect of reservoir and operational parameters, b) solvent injection strategies, c) The inconsistency between laboratory, simulation and field results and d) problems faced in numerical modeling (capturing the physics of heat and mass transfer). It is believed that a good compilation of the records produced over one decade will constitute a useful reference for the industry and academics. Analytical, simulation, laboratory studies and reported field data strongly support hybrid steam-solvent processes. However, the results are mixed at different level levels and there exists some inconsistencies. The cost of the solvent retained in the reservoir is the major concern and the economics of selected hybrid steam-solvent process for a specific reservoir has to be verified using available tools. The main challenges are verifying effective mixing of the solvent with the in-situ bitumen, managing the solvent placement and distribution in the reservoir, reliably determining the incremental benefit of solvent-addition and ensuring economic solvent recovery.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,002 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».