The Active Line Source Temperature Logging Technique and Its Application in Fractured Rock Hydrogeology
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract We present a technique for placing a borehole into thermal dis-equilibrium, and thereby interpreting groundwater flow through fractures where it may have been previously undetected. Denoted as Active Line Source (ALS) logging, the method consists of temperature logging while a borehole is heated by the cable and/or during cooling after the heating. With two or more logs collected during either heating or cooling, an estimate of thermal conductivity is obtained. The basic theory, widely used for such things as thermal conductivity probes, is shown to fit the recorded data well. The mechanics of ALS logging are described, and the practical challenges are outlined. In the absence of groundwater flow in or around the borehole, variations in the thermal conductivity of the rock are largely due to variable water content and the ALS log provides a reasonable surrogate for the neutron log. When groundwater flow dominates the dissipation of thermal energy from the borehole, however, the apparent thermal conductivity is increased. In open boreholes this flow can be both ambient (within the formation itself) and connecting (vertical flow between fractures intersected by the borehole). In cased or lined holes with no connecting flow, ALS logs are particularly useful as detectors of ambient groundwater flow. Alternative methods for flow detection, such as chemical dilution or flow-meters, require an open borehole and either have poor vertical resolution or require multiple stationary measurements, often with packers to minimize the effects of connecting flow. The ALS technique is a comparatively simple tool, useful in both open and cased or lined boreholes, run continuously down the length of the borehole, with fracture resolution on the order of a few centimeters. We describe ALS logging of a 75-meter section of a borehole through fractured dolomite which has been lined with a FLUTe sleeve. The ALS results are compared to the geologic units encountered, conventional geophysical logging techniques, time-lapse passive temperature logging, heat pulse flowmeter data and packer testing.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle