Prediction of the Location and Duration of Water Condensation in Nominally Dry Gas Transmission Pipelines
Notice bibliographique
Résumé
Gas transmission companies limit the extent of internal corrosion on their systems by imposing strict gas quality specifications for water and other potential contaminants. However, upsets do occur and water can be introduced from a number of sources. One such source is water vapour in the gas at levels that may be above or below the specification. Water vapour may condense as a thin liquid film on the inner surfaces of the pipe, leading to the possibility of internal corrosion. A model (MHICE Model for Humidity and Internal Corrosion Estimation) has been developed to predict the location and duration of water film formation as a function of various operating parameters. The code predicts the time-of-wetness (TOW) of the pipe wall, which could then be used to predict the extent of internal corrosion using separate corrosion models. MHICE simulates a straight, level pipe with a number of inlets at which moist natural gas can be introduced. Any number of upset conditions can be specified at the main inlet, each described by a background and upset water concentration. Single upsets at up to ten downstream producers can also be simulated. The model accounts for the pressure and temperature drop along the pipe, both of which affect the saturated water vapour concentration or dew point. Water condensation and evaporation is simulated using a mass-transfer coefficient, with the rate dependent on the degree of over- or under-saturation, respectively. The code predicts the spatial and temporal distribution of liquid and vapour-phase water, integration of which gives the TOW along the length of the pipe. A single upset is predicted to move down the pipe as a slug of moist gas with little mixing with the drier gas ahead of and behind the slug. Water condenses at locations where the vapour concentration exceeds the saturation value. The rates of condensation and evaporation are fast compared with the gas velocity, so the wetted region of the pipe wall is predicted to move down the pipe with the slug of water vapour until such point that the gas is no longer super-saturated with water vapour. There is some broadening of the slug due to dispersion and, at the trailing edge of the wetted film, possibly because the rate of evaporation is not instantaneous. Downstream inputs can reinforce or dilute the main upset, depending upon their location, timing, and the level of the upsets.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».