Experiment Observations of Miscible Displacement of Heavy Oil With Hydrocarbon Solvents
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This article, written by Technology Editor Dennis Denney, contains highlights of paper SPE 97854, "Experimental Observations of Miscible Displacement of Heavy Oils With Hydrocarbon Solvents," by D. Salama and A. Kantzas, U. of Calgary, prepared for the 2005 SPE International Thermal Operations and Heavy Oil Symposium, Calgary, 1–3 November. The increased interest in secondary production (or post-cold production) of heavy oil and the rise of oil prices have renewed interest in solvent-based methods for heavy-oil recovery. Although the vapor-extraction (vapex) process is favored, other methods are worth investigating. Also, the relative merit of mass-transfer and viscous mechanisms in the overall recovery efficiency remains a topic of debate. This study of mass-transfer phenomena in heavy-oil/ and bitumen/solvent systems was performed in an effort to determine dispersion coefficients. Introduction Heavy oil and oil sands will be an important part of Canada's oil supply. One-third of the world's oil is in Canada in the form of heavy oil and bitumen. The world's heavy-oil resources total approximately 10 trillion bbl, nearly three times the conventional oil in place in the world. Alberta contains nearly 2 trillion bbl of oil. Approximately one-fourth of the oil production of Canada is from oil sands. Here, in-situ recovery processes are thermal or nonthermal. Thermal processes use heat to reduce the viscosity of the heavy oil in situ, thus mobilizing the heavy oil. Examples include cyclic-steam stimulation, steam-assisted gravity drainage, and steamflooding. Nonthermal processes rely on dilution of the oil to reduce the heavy-oil viscosity. Examples include CO2 injection, miscible floods, and vapex. Displacement in the case of immiscible floods, such as waterflooding, generally is not complete, but a fluid can be displaced completely from the pores by a miscible fluid. In the case of miscible fluids, there are no residual saturations. Hence, sol-vent floods present an attractive in-situ process for the recovery of the heavy oil. However, the major challenge in miscible floods is for the miscible phase to access a significant fraction of the resident oil. In solvent-based enhanced-oil-recovery techniques, several mechanisms affect the rate of oil recovery, given that accessibility is provided. These mechanisms include mass transfer, viscous forces, and gravity drainage. The solvent diffuses and/or disperses into the heavy oil, reducing its viscosity. The solvent/oil mixture then drains and is recovered from the production well. This study focused on the mass-transfer process in miscible sol-vent floods by experimentally observing the miscible displacement of heavy oils by hydrocarbon solvents.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle