Impact of Moisture and Load on Vertical Movement of a Simulated Platform Frame Wood Structure
Notice bibliographique
Résumé
Abstract The objective of this study was to assess the relative contributions of wood shrinkage and building dead loads to vertical displacement in the form of height loss for wood-frame structures. Identifying the relative contributions of these factors while monitoring full-sized buildings presents significant challenges; therefore, a laboratory test was conducted under controlled hygrothermal conditions and loading. Two small-scale wood-frame structures were constructed with dimension lumber wall assemblies and floor joists. Both model structures were equipped with vertical movement and moisture content (MC) monitoring systems. The structures were conditioned in a chamber to a MC of approximately 20 %, and then moved into the laboratory environment for drying and loading. Model Structure No. 1 was loaded immediately; model Structure No. 2 was not loaded until after the wood had dried to the equilibrium MC. By using a unique lever system, the applied load simulated a dead load that could be experienced by the bottom floor of a six-story wood-frame building. Shrinkage coefficients were measured using samples cut from the horizontal framing members. The results suggested that the loads “forced” the structures to displace downward. At the driest time in the laboratory, the total movement of model Structure No. 1 reached a maximum of about 19 mm after 10 months, which is comparable to in situ recorded measurements from the bottom floor of a four-story wood-frame building in coastal British Columbia. Shrinkage appeared to account for 70 % of the total vertical movement, with the remaining 30 % contributable to load-induced displacement under the conditions of this test. Model Structure No. 2 showed less vertical movement but more initial displacement than model Structure 1 due to a larger settlement. This study suggested that there may be a need to consider the effect of loads in addition to wood shrinkage when estimating building height loss.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».