The Field Performance of SAGD Projects in Canada
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract The rise of the SAGD (steam-assisted gravity drainage) technology over the last ten years as the leading technology to develop oil sands in-situ is unquestionable. This despite the youth and questions that still surround this technology. Therefore, a review of most of the existing operations in Canada has been undertaken (32 pads in 8 different operations), which includes an analysis of their current performance and particularities, trying to understand what makes a SAGD project successful, and what determines its performance. Moreover, SAGD's performance has been compared with the performance of CSS (cyclic steam stimulation), the other leading in-situ technology for oil sands. The main finding of this work is that geology and reservoir properties are by far the most dominant features for a successful SAGD operation. SAGD targets must be reservoir areas with average thickness above 15 m, good vertical communication and no thief zones. Moreover, if the geological conditions are known, the SAGD process has to be operated properly as lack of operational excellence can be detrimental to the performance of any SAGD project. SAGD operations are badly compromised by lack of steam mainly, but also by long boiler shutdowns, and by losing confined injectors early on in the process, which lead to splitting big pads into smaller ones. Finally, as long as the steam chamber can grow, the ultimate recovery of a SAGD operation can be expected to be in the order of 60 to 70%. The cOSR (cumulative Oil-Steam- Ratio) can fluctuate between 0.30 and 0.50, with the higher end values associated with high quality reservoirs (mainly oil content), excellent operations, and large pads; while operations at the lower end values have usually a combination of operational issues, smaller oil content and shale baffles (poor vertical connectivity). Introduction From 1985 to 1987 the government of Alberta, represented by AOSTRA, built the Underground Test Facility (UTF), whose purpose was to prove the SAGD concept. The first SAGD pilot was run from 1987 to 1990 under the name of Phase A. This 'proof of concept' pilot consisted of three short well pairs closely spaced (50 m in horizontal length and 25 m apart). The success of this pilot led to a joint venture between AOSTRA and industry. This resulted in the first commercial pilot built from 1990 to 1992 in the same facility called Phase B. This pilot had three wells pairs as well, which were 70 m apart and had lengths of 500 m. This pilot was operated until June 2004, with an ultimate recovery in excess of 65% and an Oil-Steam- Ratio (OSR) of 0.42. Since then, more than 10 commercial SAGD projects have been operating in Canada, mainly in the Athabasca area, while CSS is used only by three operators (Imperial Oil, Shell and CNRL) in the two other Alberta oil sands areas. Therefore, over the last decade SAGD has become the preferred in-situ technology for developing oil sand leases, mainly in the Athabasca area. Presently, the biggest in-situ operation in Canada, Imperial Oil at Cold Lake, uses CSS, with a production of ~140 kbpd. Similarly, CSS is currently the technology used at Shell's Peace River as SAGD has not shown its promise there. Consequently, the rise of SAGD, a fairly young technology compared to CSS, has raised a lot of questions such as what is its efficiency, its ultimate recovery, how sound is it, what type of reservoirs are better suited for SAGD? Therefore, an analysis of the performance of the current operations must address whether SAGD is the preferred in-situ technology to develop oil sands, and under which geological conditions. The present document reviews a large database of SAGD operations in Canada (8 operations and 32 pads) and tries to address some of the questions mentioned hitherto.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle