The Optimal Hydraulic Fracture Geometry Under Non-Darcy Flow Effects
Notice bibliographique
Résumé
Abstract The presence of non-Darcy flow in the hydraulic fracture significantly reduces the effective conductivity of the fracture, and hence adversely affects the productivity of a hydraulically fractured gas well. It has been disclosed that under non-Darcy flow effect a shorter and wider fracture geometry provides better productivity than a longer and narrower fracture; on the contrary, for Darcy flow a longer and narrower fracture yields higher productivity. This work is to optimize hydraulic fracture geometry under non-Darcy flow effects in hydraulic fractured well in order to obtain maximum well productivity and economic benefit. A rigorous mathematical model is established to describe transient non-Darcy flow in hydraulic fractures and coupled with Darcy fluid flow in the reservoir. A semi-analytical method is further presented to solve this model. Then, on the basis of the simulation results, the fracture geometry is optimized for two goals. The first goal is to obtain the maximum well productivity under a given fracture volume. On the basis of theoretical analysis and hundreds of simulation results, a semi-experiential correlation is developed to calculate the optimal fracture length. The equation generated suggests that the optimal fracture length is proportional to (1/β)1/3, which means that if non-Darcy flow increases 8 times, the optimal fracture length would have been decreased by half. The optimal fracture length is also a function of fracture volume, formation permeability, fluid viscosity and density, net pay thickness and flow rate. The second goal is to achieve the maximum economic profit through optimizing the fracture volume, since larger fracture volume generally brings larger productivity, and also leads to higher hydraulic fracturing cost. Analyses show that the severer the non-Darcy flow, the smaller the optimal fracture volume required. Therefore, fracture geometry optimization should involve two stages: fracture volume optimization and fracture length optimization. The proposed optimal fracture length equation had been applied to analyze several cases from the literature. The results show that the design criterion to eliminate the non-Darcy flow effects will cause such a short fracture length that the well productivity would be reduced significantly. Therefore, it is suggested that well productivity and economical benefit should be systematically considered being the design criterion in hydraulic fracturing stimulation.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».