Effect of High Temperature Deformation on the Hot Ductility of Nb Microalloyed Steel
Notice bibliographique
Résumé
Low hot ductility of steel at the straightening stage of the continuous casting process is a problem found in steels containing microalloying and/or certain alloying additions. The thermal schedule undergone by the billet surface in the mill has a significant effect on the hot ductility. In this work, thermomechanical processing was employed to alleviate the problem of hot ductility in the Nb-microalloyed steel. Specimens were melted in situ and subjected to the billet surface thermal schedule in order to generate a microstructure similar to that present at the straightening stage of the continuous casting process. Some deformation schedules were incorporated with the thermal schedule at very high temperatures, specifically during solidification, within the d-ferrite region, and during the d®g transformation, and the hot ductility was subsequently evaluated at the end of the thermal schedule where the straightening operation is performed. After the thermal schedule alone, the steel exhibited a very low hot ductility at the straightening stage. It was found that deformation at very high temperatures prior to the straightening stage had a considerable effect on the hot ductility, either detrimental or beneficial, depending on the region in which the deformation has been executed. The mechanisms leading to loss and improvement of hot ductility are explained in this paper.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».