Local scour by submerged offset jets
Notice bibliographique
Résumé
In this paper an effort is made to understand the scour caused by submerged offset jets impinging on a cohesionless sand bed. A square cross-section nozzle and a two-dimensional (2D) nozzle spanning the width of the flume were used to generate the jets. The 2D offset jet experiments were conducted at two values of the densimetric Froude number (F 0 = 5·5 and 10) and two receiving water depths corresponding to shallow and deep tailwater conditions. The square offset jet tests were conducted at F 0 = 10 and correspond to deep tailwater conditions. Velocity measurements were conducted using a laser Doppler anemometer. For both jet types, at a given densimetric Froude number, progressing from the start of the test towards asymptotic conditions, the geometric parameters used to describe scour were found to be sensitive to the offset distance. Offset refers to the vertical distance between the nozzle invert and the initial sand bed and an asymptotic state refers to the situation where no significant change in the scour geometry was noticed with increasing time. For the 2D zero-offset jet condition, a backward-facing step was formed at the invert of the nozzle and the general flow features resembled those of an offset jet. At the lower value of the relative tailwater depth, the flow and the corresponding scour pattern was different from that found at the deep tailwater condition. For the square jet, the shape of the scour hole and the corresponding mound were elongated longitudinally and decreased laterally as the offset distance was increased. The distance between the nozzle and the point of the beginning of the scour hole was found to increase with increasing offset distance. Turbulent bursts were noted to occur and to influence the scour process. By proper choice of scaling variables, the centreline scour profiles in the hole region were collapsed onto a single curve.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».