Thermal Aspects of Geomechanics and Induced Fracturing in CO2 Injection With Application to CO2 Sequestration in Ohio River Valley
Notice bibliographique
Résumé
Abstract Ohio River Valley is considered a potential site for CO2 storage since it is in close proximity to large CO2 emitters in the area. In a CO2 storage project, the temperature of the injected CO2 is usually considerably lower than the formation temperature. The heat transfer between the injected fluid and rock has to be investigated in order to test the viability of the target formation to act as an effective storage unit and to optimize the storage process. A coupled flow, geomechanical and heat transfer model for the potential injection zone and surrounding formations has been developed. All the modeling focuses on a single well performance and considers induced fracturing for both isothermal and thermal injection conditions. The induced thermal effects of CO2 injection on stresses, displacements, fracture pressure and propagation are investigated. Possibility of shear failure in the caprock resulting from heat transfer between reservoir and the overburden layers is also examined. Displacements will be smaller for the thermal model compared to isothermal model. In the thermal case, the total minimum stress at the wellbore decreases with time and falls below the injection pressure quite early during injection. Therefore, fracturing occurs at considerably lower pressure for the thermal model. The coupled thermal and dynamic fracture model shows that thermal effects of injection could increase the speed of fracture propagation in the storage layer depending on the injection rate. These phenomena are dependent primarily on the difference between the injection and reservoir temperature. An optimization algorithm for injection temperature is discussed based on limiting the maximum fracture length and minimizing the risk of leakage from thermal effects of CO2 storage while improving the injection capacity. Incorporation of thermal effects in modeling of CO2 injection is significant for understanding the dynamics of induced fracturing in storage operations. Our work shows that the injection capacity with cold CO2 injection could be significantly lower than expected, and it may be impractical to avoid induced fracture development. In risk assessment studies inclusion of the thermal effects will help prevent the unexpected leakage in storage projects. The methodology developed will play an important role in process optimization for maximizing the injection capacity while maintaining the safety of storage.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».