Mass Transfer on Multiphase Transitions in Low-Temperature CO2 Floods
Notice bibliographique
Résumé
Abstract Mixtures of reservoir oil and CO2 can exhibit complex multiphase behavior at temperatures typically below 120°F, where a third CO2-rich liquid (L2) phase can coexist with the oleic (L1) and gaseous (V) phases. The three-phase behavior is bounded by two types of critical endpoint (CEP) tie lines in composition space. The lower CEP (LCEP) tie line is where the two liquid phases merge in the presence of the V phase, and the upper CEP (UCEP) tie line is where the L2 and V phases merge in the presence of the L1 phase. Slim-tube tests reported in the literature show that low-temperature oil displacement by CO2 can result in high displacement efficiency of more than 90% when three phases are present during the displacement. The nearly piston-like displacements can be quantitatively reproduced in numerical simulations when the CEP behavior is properly considered. However, it is uncertain how multicontact miscibility (MCM) is developed through interaction of flow and three-hydrocarbon-phase behavior. In this research, we analyze mass conservation on multiphase transition between two and three phases for the limiting three-phase flow, where the L1 phase is completely displaced by the L2 phase on the LCEP. The analysis indicates that mass transfer on multiphase transition occurs in the most efficient way for MCM development. Simple analytical conditions derived for MCM through three phases are applied to 1-D fine-scale simulations of CO2 floods using four and more components. Results show that the MCM conditions are nearly satisfied when the effect of numerical dispersion is small. MCM is likely developed through three hydrocarbon phases on the LCEP in the cases studied. This is consistent with analytical solutions of water and gas injection presented in the literature, where MCM is developed on a CEP for the aqueous, V, and L1 phases. For MCM cases in this research, the L2-V two phases are present upstream of the miscible front, but can also be miscible on the non-L1 edge of the UCEP tie line. The limiting three-phase flow does not necessarily occur at the highest pressure for three-phase flow, especially when a heavy oil is displaced by solvent at low temperatures. This is a marked difference from the conventional MCM development through two phases, where the limiting two-phase flow typically occurs at the highest pressure for two-phase flow. Three-phase flow gradually changes to two-phase flow with varying pressure in the presence of numerical dispersion. We show that mass transfer on multiphase transition becomes less efficient during the change until the three-phase region completely disappear.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».