Storage‐dependent drainable porosity for complex hillslopes
Notice bibliographique
Résumé
In hydraulic groundwater theory the parameter drainable porosity f (a storage coefficient that accounts for the effect of the unsaturated zone on water table dynamics) is usually treated as a constant. For shallow unconfined aquifers the value of this parameter, however, depends on the depth to the water table and the water retention characteristics of the soil. In this study an analytical expression for f as a function of water table depth is derived under the assumption of quasi‐steady state hydraulic equilibrium, in this way accounting, in part, for the effects of the unsaturated zone on groundwater dynamics. The derived expression is implemented in the nonlinear hillslope‐storage Boussinesq (HSB) model (Troch et al., 2003) to simulate the drainage response of complex hillslopes. The model's behavior is analyzed by comparison to (1) the HSB model with a constant value for f and (2) measurements of water tables and outflow hydrographs on a 6.0 × 2.5 × 0.5 m laboratory hillslope experiment. The comparison is conducted for a pure drainage case on two different hillslope shapes (linearly convergent and divergent) and for three different slope inclinations (5%, 10%, and 15%). Comparison 1 is run in an uncalibrated and a fully calibrated mode, and it enables us to evaluate the effect of a dynamic, state‐dependent value for f on model output. Comparison 2 allows us to test the HSB model on several hillslope configurations and to analyze whether the concept of a storage‐dependent f enhances the model performance. The comparison of the HSB models to the measurements from the laboratory hillslopes shows that it is possible to capture the general features of the outflow hydrograph during a drainage experiment using either one of the HSB models. Overall, the original (constant f ) HSB model, with one fitting parameter more than the revised HSB model, shows a slightly better fit on the hydrographs when compared to the revised (variable f ) HSB model. However, the peak outflow values (the first few minutes after initiation of the experiments) are better captured by the revised HSB model. The revised HSB model's performance in simulating water table movements is much more accurate than that of the original HSB model. The improved match of the revised HSB model to piezometric measurements is worth stressing because the ability to model water tables is a key attribute of the model, making it possible to investigate phenomena such as saturation excess runoff. Also noteworthy is the good match between the revised HSB model and the outflow measurements, without any calibration, for the divergent slopes. The changing values of the calibrated drainable porosity parameter for the original HSB model as different configurations are simulated (slope angle, plan shape, initial conditions), together with the ability of the revised HSB model to more accurately simulate water table dynamics, clearly demonstrates the importance of regarding drainable porosity as a dynamic, storage‐dependent parameter.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,001 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,002 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; les deux têtes enseignantes s’accordent sur ce qui est montré ici.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».