Performance of Shrouded Pin-Fin Heat Sinks for Electronic Cooling
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The objective of this study is to analyze the performance of a cylindrical pin-fin heat sink in laminar forced convection. The mathematical models are presented for predicting thermal and hydraulic resistances for both in-line and staggered arrangements. Analytical/empirical correlations of friction and heat transfer coefficients are used in the analysis. The analyses are performed by using parametric variation of resistances. The effects of thermal joint, spreading, and contact resistances as well as the thermal conductivity on the overall thermal performance are examined. For a given size and heat load, it is observed that the overall performance of a pin-fin heat sink depends on a number of parameters including the dimensions of the pin-fins, pin density, longitudinal and transverse spacings, interface material, location and size of heat sources, method of manufacturing, type of heat-sink material, approach velocity, and arrangement of pins. It is also observed that the thermal resistance decreases whereas pressure drop increases with an increase in approach velocity, pin diameter, and pin density. Nomenclature Ab = area of the base plate ≡ L × W ,m 2 Ac = cross-section or contact area of a single pin, m 2 Afin = surface area of a single pin, m 2 Ahs = surface area of heat sink, m 2 CV = control volume D = pin diameter, m f = friction factor H = pin height, m h = average heat transfer coefficient, W/m 2 · K he = uniform effective film coefficient, W/m 2 · K k = thermal conductivity, W/m · K ks = harmonic mean thermal conductivity for the two solids, W/m · K L = length of heat sink in flow direction, m m = fin performance parameter, m −1 N = total number of pins in heat sink ≡ NT NL NL = number of pins in the longitudinal direction NT = number of pins in the transverse direction Nu D = Nusselt number based on pin diameter ≡ Dh/k f P = contact pressure, N/m 2 Pr = Prandtl number ≡ ν/α Q = total heat transfer rate, W Rc = contact resistance between fins and the baseplate, K/W R f = total resistance of fluid side of heat sink, K/W Rfilm = thermal resistance of exposed (unfinned) surface of the baseplate, K/W Rfin = resistance of a fin, K/W R j = thermal joint resistance between the source and the baseplate, K/W Rm = material resistance of the baseplate, K/W Rs = thermal spreading resistance in the baseplate, K/W
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle