Non-Linearity and Stress-Dependency In Unconsolidated Formations and the Associated Impacts on Thermal Recovery: An Analytical Assessment
Notice bibliographique
Résumé
Abstract In thermal recovery from unconsolidated oilsands reservoirs and in association with fluid mobility, formation compressibility and modulus of elasticity are closely related to pressure transient and stress redistribution behavior, which can collectively affect the steam chamber development. The non-linearity and stress-dependency in bulk compressibility and modulus of elasticity of rocks has been captured through the development of elegant constitutive models (e.g. nonlinear elastic hyperbolic model) and has been readily integrated into coupled reservoir-geomechanical simulation packages. To assess the significance of these nonlinearities for reservoirs with different initial stress states, this paper presents an analytical study where the associated impacts on the redistribution of stress (stress-paths) and the onset of geomechanical mobilization (shear dilation) under the assumption of uniaxial deformation are quantified. Within the scope of this paper, (semi-) analytical modeling is conducted while special attention has been devoted to (1) the vast range of depths of the existing oilsands reservoirs and the associated implications on the initial stress distribution as well as stress redistribution due to steam/water injection, (2) the impacts on the onset of geomechanical mobilization within the practical ranges of injection pressures, and (3) the evaluation of geomechanical mobilization potential for thermal (steam injection) versus non-thermal (cold water injection) pressurization. The results show that (1) the potential impact of stress dependency on the variability of the geomechanical properties (modulus of elasticity, Poisson's ratio and formation compressibility) is more significant for shallow reservoirs as compared to mid-depth and deep reservoirs, (2) the injection pressure required to onset the geomechanical mobilization may be under/overestimated if the non-linearity in the mechanical properties is overlooked, and (3) the thermal geomechanical mobilization (steam injection) may have a higher potential within practical ranges of operating pressures as compared to non-thermal techniques (cold water injection), especially for shallower reservoirs. The inherent limitations of the analytical workflows as well as the requirements of supporting efforts through coupled reservoir-geomechanical simulations are also discussed.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».