Global exploration and production capacity for platinum-group metals from 1995 through 2015
Notice bibliographique
Résumé
Platinum-group metals (PGMs) are required in a variety of commercial, industrial, and military applications for many existing and emerging technologies, yet the United States is highly dependent on foreign sources of PGMs.Information on global exploration for PGMs since 1995 has been used in this study as a basis for identifying locations where the industry has determined that exploration has provided data sufficient to warrant development of a new mine or expansion of an existing operation or where a significant increase in capacity for PGMs is anticipated by 2015.Discussions include an overview of the industry and the selected sites, factors affecting mineral supply, and circumstances leading to the development of mineral properties with the potential to affect mineral supply.Of the 52 sites or regional operations that were considered in this analysis, 16 sites were producing before 1995, 28 sites commenced production from 1995 through 2010, and 8 sites were expected to begin production from 2011 through 2015 if development plans came to fruition.The United States imports PGMs primarily from Canada, Russia, South Africa, and Zimbabwe to meet increasing demand for these materials in a variety of specialized and high-tech applications.Feed sources of PGMs are changing in South Africa and Russia, which together accounted for about 89 percent of platinum production and 82 percent of palladium production in 2009.A greater amount of South African PGM capacity is likely to come from deeper, higher cost Upper Group Reef seam 2 deposits and deposits in the Eastern Bushveld area.Future Russian PGM capacity is likely to come from ore zones with generally lower PGM content and different platinum-to-palladium ratios than the nickel-rich ore that dominated PGM supply in the 1990s.Because PGM supply from Canada and Russia is derived as a byproduct of copper and nickel mining, the PGM supply from these countries is influenced by economic, environmental, political, and technological factors affecting exploration for and development of copper and nickel, as well as factors affecting the PGM industry.The recovery of PGMs from mill tailings since 2004 and the recycling of PGMs from catalytic converters, electrical components, and jewelry has increased since 1995 so that recycled PGMs recovered from these products accounted for about 30 percent of the supply of platinum worldwide and 29 percent of the supply of palladium worldwide in 2010.Economic and geopolitical conditions have influenced PGM supply and demand.The global recession of 2008 and 2009 temporarily decreased demand for PGMs and constrained PGM mine exploration and development, at least through 2010.Legislation regulating the structure of the mining sector has affected mining in Russia, South Africa, and Zimbabwe.Stricter vehicle emissions standards in established markets since the 1980s have led to mandatory use of pollution control devices, such as catalytic converters, that contain PGMs and are required on vehicles in expanding markets, such as China and India.It is expected that South Africa, Russia, Canada, and Zimbabwe will continue to be the principal sources of PGM at least for the next decade.Based on this review of the PGM industry, the world's platinum capacity, expressed in terms of recoverable platinum metal, increased from 1995 through 2010 by 77,000 kilograms (kg) in South Africa, 9,000 kg in Zimbabwe, 6,000 kg in Russia, 2,000 kg in Botswana, and 2,000 kg in Canada.For the same period, palladium capacity worldwide increased by 44,000 kg in South Africa, 22,000 kg in Russia, 8,000 kg in Canada, 8,000 kg in the United States, 7,000 kg in Zimbabwe, and 3,000 kg in Botswana.Platinum capacity worldwide is expected to further increase by 24,000 kg in South Africa, 9,000 kg in Russia, 3,000 kg in Canada, and 2,000 kg in Zimbabwe from 2011 through 2015.Palladium capacity worldwide is likewise expected to increase an additional 16,000 kg in Russia, 14,000 kg in South Africa, 4,000 kg in Zimbabwe, and 1,000 kg in Canada if new or expanded mine and associated processing capacity comes
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,002 | 0,004 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,004 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».