Interactions between Variable Frequency Microwave Underfill Processing and High Performance Packaging Materials
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Variable frequency microwave (VFM) has been recently proposed as an alternative underfill curing method that provides flip chip package warpage improvement as well as potential underfill cure time reductions. The current paper outlines how such advantages in VFM processing of underfill can be compromised when applied to high performance organic packages. VFM recipes for three underfill materials were developed by performing several VFM curing runs followed by curing rate measurements using the differential scanning calorimetry method. The VFM curing rate was seen to strongly dependent upon the underfill chemistry. By testing flip chip parts that comprised large and high-end substrates, we showed that the underfill material has negligible impact on VFM warpage with the major cause attributed to the coefficient of thermal expansion mismatch between the die and the substrate. Comparison between the convection and the VFM methods indicated two warpage tendencies that depended upon the VFM curing temperature. First, when both curing methods used comparably high temperatures, warpage increases up to about + 20% were found with VFM. This unexpected result was explained by the high-density Cu loading of the substrate which systematically carried heat generated by VFM energy from the die/underfill system to the substrate. Since this high-end substrate consists of sequential dielectric/Cu layers with asymmetric distribution of Cu, additional stresses due to local CTE mismatches between the Cu and the dielectric layers were induced within the substrate processed with VFM. Second, warpage reductions down to about − 22% were obtained at the VFM curing temperature of 110°C with a curing time similar to that of convection cure. This suggests that the negative effect of the local CTE mismatches were no longer at play at the lower VFM temperatures and that the significantly lower final cure temperatures produced lower total shrinkage of the die and the substrate. Finally, due to lower elastic moduli, the cured VFM parts showed better mechanical reliability with no fails up to 1500 cycles.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle