Predicting and Optimizing ROP in Competent Shale by Utilizing MPD Technology
Notice bibliographique
Résumé
Abstract Advanced Managed Pressure Drilling (MPD) technology was used onshore in Western Canada to optimize ROP while drilling horizontally through the potentially sour shale formation using a low solids, low density synthetic base mud system. The Montney shale formation is very challenging to drill conventionally and has the potential for drilling into high pressure fractures which may contain sour gas. The overall objective consisted of using a lower density synthetic base mud system to optimize the ROP, thereby saving on overall drilling costs by reducing the number of drilling days and also drill the well safely due to the possibility of high pressure fractures and potentially sour gas. The main challenge was to increase ROP while still maintaining a constant bottomhole pressure to prevent any gas inflow into the wellbore. In order to optimize drilling efficiencies and save on drilling time, advanced MPD technology was applied in combination with a low density (770 kg/m3) synthetic based mud while holding surface back pressure (SBP) in dynamic and static conditions to maintain a constant bottomhole equivalent circulating density (ECD). The system's annular pressure control mode was used to hold a desired ECD at a pre-determined position within the wellbore; In this case the heel was chosen. Constant bottomhole pressure operations were maintained throughout the entire project. The desired ECD was achieved and the well was kept at balance with the pore pressure. The advanced MPD system also provided the ability to monitor, detect and control an influx at the bit much earlier than conventional MPD and drilling systems which provided additional safety to the location. While drilling conventionally the ROP was extremely slow averaging 3.32 m/hr. The results greatly improved using advanced MPD technology with average ROP's between 7.4–10.5 m/hr. This application also brought value to the project by reducing mud costs, increasing overall ROP as compared to conventional offset ROP data, maintaining constant bottomhole pressure with flexibility to adjust pressures as the well dictated, increasing safety through detection and control of micro influxes while drilling, reducing bits used as compared to conventional offset bit record data and minimizing any gas to surface. Achieving the goal of increasing the ROP and safely drilling the well to TD reduced the number of drilling days by at least 13 days, thereby reducing the overall AFE of the well. This paper will include engineering analysis of the project compared to offset data along with graphs and tables. It will further include detailed explanation of pre-engineering and execution methods of advanced MPD in order to achieve ROP optimization and reduce your drilling cost.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».