Heat exchanger fouling by precipitation of calcium phosphates
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The fouling characteristics of artificially hardened waters containing calcium and orthophosphate ions were investigated. The water was circulated through a steam heated double pipe heat exchanger under turbulent flow conditions. Inlet water temperatures were about 20 to 25°C and the phosphate content about 100 ppm. Experiments were carried out to ascertain the effects of pH, velocity, surface temperature and concentrations of the calcium and the orthophosphate on the fouling process. The fouling behaviour was recorded in terms of the fouling resistance-time curve which was calculated from the time dependence of the overall heat transfer coefficients. Under the constant heat flux condition imposed, the fouling resistance was generally linear in time; however, asymptotic fouling was observed in some cases. The fouling rate was found to be a very strong function of the pH over the range 6.5 to 8.0. The rate was also found to be exponentially dependent on the calculated surface temperature. The initial fouling rate increased linearly with the velocity and with the concentrations of scale forming species. Deposit thickness increased with heated length of the stainless steel test section. In most cases, the deposit was a dense crystalline scale, which had a Ca/P molar ratio of 1.35±0.15. The results are discussed in terms of the ionic equilibrium involved and the solubility and crystallisation kinetics from the literature. It is apparent that the rate of phosphate precipitation is influenced both by surface reaction and mass transfer in the range of the variables studied. Findings are compared with the few prior phosphate fouling studies from the literature. Scale density is reported, and its thermal conductivity estimated using the fouling resistance measurements.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle