The measurement of wake and surface effects in the subcritical flow past a circular cylinder at rest and in vortex-excited oscillation
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
A pressure transducer, sensitive to acoustic level pressures, was designed and used to measure amplitude, frequency and phase of fluctuating pressure on the surface of a three inch diameter circular cylinder at rest and exhibiting large-amplitude vortex-excited oscillation in a uniform incident wind flow. The phase of the fluctuating pressure relative to the cylinder motion and the cylinder amplitude and frequency were recorded. A disc probe connected to the pressure transducer was used in wake surveys for the stationary and oscillating cylinder. Measurements, made in the Reynolds number range 1.5(10⁴) <N(R)< 4.1(10⁴), indicated the following: Fluctuating pressures on the surface of both a stationary and a vortex-excited circular cylinder experience amplitude modulation, being random for the stationary cylinder and critically dependent on wind speed for the vortex-excited cylinder. Fluctuating pressures for both a stationary and an oscillating cylinder are in phase over one side of the cylinder and 180° out of phase with the opposite side. For a vortex-excited cylinder, the vortex frequency is 'captured' by the cylinder frequency over a discrete range of wind speed. The amplitude of fluctuating pressure on the surface of a vortex-excited cylinder increases as the resonant wind speed (wind speed corresponding to maximum cylinder amplitude) is approached, but before that actual wind speed is reached, an abrupt decrease occurs, and the amplitude modulation nearly disappears. A sudden change of phase between cylinder motion and fluctuating pressure occurs near the resonant wind speed and the pressure wave form becomes asymmetrical. The longitudinal spacing of vortices in the wake of a stationary and a vortex-excited cylinder initially increases as the vortices are swept downstream from the formation zone. Vortex-excited oscillation of a cylinder, as the resonant wind speed is approached, produces an increase in longitudinal vortex spacing and a corresponding abrupt decrease in lateral spacing. At the resonant wind speed, the wake loses its coherent periodicity.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle