Continuous Measurement-While-Drilling Surveying System Utilizing Low-Cost SINS
Notice bibliographique
Résumé
Abstract In the oil and gas drilling process, measurement-while-drilling (MWD) systems are usually used to provide real-time monitoring for the position and orientation of the bottom hole assembly (BHA). The current MWD systems can be categorized into magnetometer-based systems and gyroscope-based systems, which both compute the wellbore trajectory based on stationary surveys at the desired station using a mathematical model with certain assumptions. This current technology neglects the actual trajectory between surveying stations. This research proposed a system using low-cost strapdown inertial navigation system (SINS) to avoid the limits of traditional methods. Demands have been rising for a continuous survey that captures the actual trajectory between the stationary surveying stations, especially in case of directional drilling process. Based on this technology, "dogleg" along the trajectory can be estimated more accurately. Therefore, a low-cost SINS consisting of three MEMS accelerometers and three MEMS gyroscopes is proposed to estimate the trajectory and satisfy the cost demand of commercial companies. This MWD surveying system could eliminate the size constraint of conventional inertial sensors and thus can be used in small well drilling. The core algorithms in the system are SINS mechanization and unscented Kalman filtering (UKF). Due to the large noise in MEMS sensors especially under large shocks and high vibrations, this wellbore survey system will exhibit an unlimited growth of position, inclination, tool face angle and azimuth errors if there are no external observations to update the surveying system. The following external aiding information can be used as updates for the MEMS-based INS in the drilling procedure: the length and velocity information of the total pipelines, the zero velocity information during periodic stop intervals and azimuth information from the magnetometers. Performances the following different solutions: (1) MEMS sensors; (2) MEMS sensors + length/velocity update; (3) MEMS sensors + length/velocity update + ZUPT; and (4) MEMS sensors + length/velocity update + ZUPT + mag-based heading were analyzed. The proposed method was validated by 4 different simulation cases with respect to a typical wellbore trajectory: build, hold and drop wellbore profile. Situations of external aiding information being temporarily unavailable were considered in the simulation. The performance and feasibility of the presented continuous borehole surveying method had been demonstrated in this paper. The proposed low cost SINS-based MWD method can eliminate the costly nonmagnetic drill collars for the magnetometers, overcome the size limitation of gyroscope-based MWD systems for small wells drilling, survey the borehole continuously without interrupting the drilling process, and improve the overall accuracy by utilizing UKF technique.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».