Nanosilica Addition Dramatically Improves the Cell Morphology and Expansion Ratio of Polypropylene Heterophasic Copolymer Foams Blown in Continuous Extrusion
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Currently, the preparation of polypropylene (PP) foam with a well-defined cell structure and a high expansion ratio is receiving increased attention. However, the present technical problems such as poor cell nucleation ability and weak melt strength of polymer resin, hinder the broader use of linear PP in foam production. In this study, a PP heterophasic copolymer with a linear structure was selected together with nanosilica to challenge the fabrication of PP foam with uniform cell structure, high cell density, and a high expansion ratio using CO 2 as a physical blowing agent. Scanning electron microscopy (SEM) observation indicated that silica particles tended to aggregate in the PP matrix, but the multisilica aggregates with sizes from 80 to 350 nm were well dispersed in PP because of the addition of a coupling agent (CA). PP foam exhibited poor cell morphology and low cell densities of ca. 10 4–5 cells/cm 3 at different die temperatures. An introduction of a small amount of nanosilica, 0.5 wt % and 1 wt %, dramatically improved the foaming behavior of PP, where the cell structure distribution of the resultant foams was uniform, and the cell density and foam expansion were high (i.e., 10 8–9 cells/cm 3 and 16.9–19.5, respectively). Furthermore, the presence of nanosilica clearly broadened the foaming window of PP. By further increasing silica content, however, the foaming behavior of PP/silica nanocomposites became poor, especially at slightly higher die temperatures (i.e., above 140 °C), even though a high silica loading increased the number of heterogeneous nucleation sites. The effect of foaming on the dispersion of nanosilica in the PP matrix was also investigated.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle