Improvement of the CHOPS Process Efficiency
Notice bibliographique
Résumé
Abstract Heavy oils with about 500 cp to 50,000 cP viscosity in unconsolidated sand reservoirs are commercially produced without heat injection, by a production method known as the Cold Heavy Oil Production with Sand (CHOPS). CHOPS reservoirs are generally about a kilometer wide and may range from 3 to 5 m thick sand blankets to 35 m thick sand channels which are between 0.5 to 5 Darcy permeability, 28 to 32% porosity, and have about 88% oil and 12% water saturations. CHOPS production is always coupled with the production of the dissolved gas, mostly CH4 and minor amounts of H2S and CO2, and sand production which causes formation of wormholes in the reservoir. Formation of wormholes in the initial phase of the reservoir life promotes oil migration and thus increases oil production; however, continued wormhole formation in long term operations reduces the oil production rate and harms the sweeping efficiency of the original oil in place, typically to less than 10%. Because of low sweeping efficiency, several Post-CHOPS process concepts have been investigated to recover the remaining oil in the reservoir. The objective of the present study is to increase the production and sweeping efficiencies of CHOPS and Post-CHOPS processes by altering the wettability of oil and reservoir sand as well as the wettability of oil and connate water and/or water injected into the reservoir. In this study, an oil-water emulsion sample produced by CHOPS process was centrifuged to separate the oil and water phases to avoid using chemical demulsifiers. The separated oil and water phases were physically and chemically characterized and the oil-water interfacial tension was determined using pendant drop method at a temperature range between 20 to 50 oC. The effects of solvent, surfactant, and pH on oil-water interfacial tension were independently investigated by either diluting the oil with pentane as a solvent additive (5% to 15% by mass of oil dosages), emulsifying biodiesel (fatty acids methyl esters, chemical formula: CnHm-COOCH3; m<2n+2) as a surfactant additive into the water phase (0.05% to 0.3% by mass of oil dosages) and altering the pH of the water with using NaOH and HCl. Results of these studies suggest that bitumen mobility and sweeping efficiency of CHOPS and Post-CHOPS processes could be improved by reducing the oil-water interfacial tension. The present experimental research demonstrates that oil-water interfacial tension could be reduced by either a basic or a nonionic surfactant additive. Implementation of these findings to CHOPS and Post CHOPS processes needs further understanding of the CHOPS reservoir characteristics. Laboratory test results are encouraging enough for further laboratory and field trials to increase the production and oil sweeping efficiencies of the CHOPS reservoirs.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».